Bowls do it yourself for a children's bed, step by step

About a beautiful and cozy children's room with a fabulous bed and a canopy, everyone dreamed. Unfortunately, not everyone has a dream come true, but why not carry out for children, creating a step-by-step cavity on the crib with their own hands and decorating them with a crib?

Before you begin to start your own hands to create a unique accessory into the baby's room, decide what kind of canopy impresses you. The simplest classification is on the type of fastening. You can choose the type of fastening from options:

• the product must close the entire crib - the holder needs to be fixed above the crib approximately in the middle. Baldachins covering a fully sleeping place to create from light fabrics. This is the perfect option for kids sleeping in a luleclue with sides, which fall out of the edges;
• the clerk attached to the headboard is the most popular option that can be seen in stores or in the photo in magazines. It is suitable for older children who have their own full bed. Such an accessory will add romance and cozy children's room;
• baldahin, which is fixed around the perimeter of the bed - the option of a bed "For a prince or princess".

If the child is already adult enough to make a choice, decide with him, what kind of canopy you will create. By the way, the baby can sew individual details independently, he will feel its importance as a family member and as an assistant. The next factor that needs to be taken into account when choosing a type of such an accessory is a bed type, - for a newborn lulee and for a cottage-school cider needed completely different cauldhens, although the principle of sewing is the same.

The main rules for creating an accessory for children's

The pattern of the standard canopy of the medium length represents a rectangle in a length of 2.5 m and a width of 1.5 m, it can be found in the photo in the editions for the needlewoman, or on the Internet. Such a quantity of the material is enough if you want to make a canopy over a small baby cot. If you need an accessory for the bed more than an adult child, or you want a lot of rocks and folds, take more material - 3 m in length and 2 m in width.

But there is a golden rule that is relevant when creating such a "highlight" in the children's room - it is worth using high-quality fabrics that allow air to circulate normally, and do not cause reactions when contacting with delicate skin of the child. Such an accessory should like the future little owner, so try it to make it enough fun, with decorations.

Materials and tools

To work will be required:

• line or roulette;
• pencil;
• threads;
• needles;
• pattern;
• material for sewing and decorating;
• drill screwdriver;
• at least four dowels.

As for the fabric, it is better if it is natural (tulle, thin sitherium, chiffon, organza, silk), although the modern market offers sufficiently good synthetic options (Capron, polyamide chiffon, polyester organza, artificial silk). Choose not too bright fabric, - Bedalchin above the bed must configure the child to a calm way.

If you dream with your own hands to create a dense balladahin, give preference to natural velvet, sitz, tapestry. Such a "requisite" will protect the sleep of a baby from bright light, but it will be more difficult to care for it, because dust and allergens such canopies are gathered more active than light and thin options.

As a basis that can be kept by the Baldahin, conventional chains for embroidery, acquired at the store holder or holder made by hand.

To make a really beautiful accessory, it is necessary to work on the decoration, because the most beautiful models that are visible in stores or in the photo on the unstashes of the World Wide Web are always with bows, rules, embroidery or lace. This beauty is really done with your own hands, it is worth purchasing:

• dense ribbons - they resent the edges, create bows and to strip the top;
• the corresponding color of the thread - the threads select accurately into the tone of the tape so that the product looks carefully;
• different ready-made little bows, lace ribbons, with which the end result of the work will really look great.

The process of manufacturing various types of Baldakhinov

You can independently produce various colors for both the bed of the newborn and the baby's bed is older. We offer several options for the manufacture of Baldakhin.

Fastened

I would like to note, the pattern for the accessory may not only be rectangular. You will make your own hands without any problems with rounded tips, armed with comfortable scissors. Also, the edges can be wavy, cloth, that is, the only limitation is a fantasy!

The process algorithm looks like this:

• the standard pattern, which was said - this is half a canopy. Two parts must be a mirror reflection of each other;

• after how you cut them out, be sure to treat the edges. The fabric must be overlooking, weigh the ribbon just in length. The upper edge must remain impaired, we will conduct completely different manipulations with it. It is better to sow cloth using a sewing machine by choosing the most thin needle. If there is no such equipment at hand, you really do everything and do it all, only in time this process will be long;

• the refinement of the product will be added Ryushi, which should be separated by the front edges of the Baldakhina;

• the top edge should be as strong as possible, so without high-quality dense tape you can not do. Sew the fabric and tape is necessary so that it really was to turn the holder for the accessory, that is, the tape should rise by 1-1.5 cm above the edge of the fabric;
• billet decoration is the most interesting process. Even before this accessory is placed on the holder, it should be decorated according to your taste preferences or as in the photo, according to which the masterpiece creates. All small details must be qualitatively attached so that the child does not take them away, playing. Do not choose too large elements of decorations for accessories so that the canopy remains easy and almost weightless. It is not recommended to use fates, because the dust hides well behind them. Already after they managed to sew two decorated halves, you can start securing;
• after how the maiden made by the Baldahin on the holder, the joints of the joints should be covered with bows created from the tape, which was used to finish the edges of the pattern;

• if you want to create a holder yourself, take a good wire, bend it with the letter "P" so that long edges are the same. Attach to the headboard using ordinary screws with a metal tube (preferably chromed, it looks most attractive). Nutya on the holder ready-made canopy, insert the ends of the wire into the top hole of the pipe.

Many craftswomen who decorated to make Baldahin to the floor, regretted a similar solution. Yes, it looks beautiful, but too quickly dirty. By the way, the long-lasting baby of the older kids can simply break, trying to ride on it or climb into a crib.

Pilotted in the middle

Armed with material, scissors, needles and threads, start creating a cute cape above the bed, securing to the ceiling:

• material will need as much two large rectangles 2 m per 1.5 m. In principle, the pattern may not differ from those that are suitable for the cellarins fixed by the head of the head. Although the finished product will look at no less attractive, if half do half-circular;
• the sewing process does not differ from the above, with particular attention to the process of finishing the edges;
• decorate the finished product before mounting on the holder. Accessories It is advisable to place in a uniform number of two sides of a cot. By the way, it looks harmonious with the canor with your own hands the carousel with toys, which should be fixed on the holder of the Baldakhin. Since it will be right above the child - the baby will be able to enthusiastically study the figures;
• with such a canopy holder, ordinary blocks of large diameters can perform, for one part of which the finished halves of the Baldakhina are put on. On the second part of the hoop, gently tie the ribbons (which were used to finish the edges of the Baldakhin);

• as a variant of the scenery of the upper part, a wide ribbon can perform, the length of which will be enough to cover the place of fastening of the Baldakhina to the hoop. Decorate the tape with bows, flower, bright elements and after fixing on the canopy;

• exactly in the middle of a children's cot with the help of a screwdriver is a 2-4 dowel or anchor with hooks (everything must be pre-purchased in a construction store);
• on the hooks attached to the ceiling, tie the ribbons, which tied to the hoops holding the canopy.

Royal

We are talking about the caustichene, fixed around the perimeter of the curtain of the heir. The process of creating a thing step by step corresponds to the described one, only the design for consolidation will be difficult, although it is actually created with your own hands. Here you need four holding elements (racks), fixing along the edges of the bed. The top of the frame is better to create from a durable chrome-plated frame, to which the canopy will fall asleep or attach directly like tulle on the cornice. By the way, give preference precisely such a version of the canchine, why not create a top, which is directly above the sleeping place, from dense tissue that protects against bright light and dust.

The required amount of tissue depends on the size of the baby bed and on the amount of folds on the finished product:

• creasing a cauldron of light translucent fabric, army with a material of 4 m long and 1.5 m wide. There should be 4 rectangles - 2 large and 2 smaller (which will be scented along the length and width of the bed). Heavy and tight fabric to create such a decoration of the children's room are not recommended to take, as the baby will feel behind her, as in the box;
• having finished the process of finishing the edges, we proceed to decorating on the Baldakhin especially beautifully look at the accessories in the form of flowers, butterflies, bows that actually make with their own hands (ideas will see in the photo in periodicals) or purchase ready-made;

• holding element in the form of racks, if wooden, it is worth painting, open lacquer to go well with the interior of the bedroom;
• it is necessary to set the racks so that they are tightly pressed (attached) to the edges of the baby cot;
• at the top of the racks, four bars of the Baldakhin holders are fixed, which are already dried parts of the finished product;
• if you bought a crib with racks, just pull the beautiful decorative cords between them, on which you can also place parts of the canchine.