Denim patchwork covered with her own hands

Not so long ago, such a kind of needlework, as Patchwork has become quite popular among the masters. And it is not at all surprising that many want to take on the creation of the covered, pillowcase or tablecloths in this technique, because the subject created in this way will become an excellent bright addition to the home interior. Heat, comfort, fascinating flavoring - all this can be achieved by creating a patchwork covered personally.

What is necessary to create a patchwork bedspread

Quilters who still have insufficient experience in working with patchwork sewage, can safely take on the creation of such an element of the home decor with full confidence that it will be for them.

The only requirement for skill is the ability to use a sewing machine. Therefore, even ordinary seamstress can be sehered among themselves, not going to dive into the secrets of Hend Maid.

To create a patchwork covered with your own hands you will need:

1. Fabrics. Since the bedspread will be created in the technique, the flaps are the most necessary material. For a standard format blanket - 1.5 by 2.3 meters - you will need square flaps of 23 cm side. The appropriate size, as well as the future bedspread, must be dialing the web, it will become an offside of the blanket, and also should prepare the synthetic lining with the sides of 1.3 meters by 2.1.
2. Threads must be selected in accordance with the tone of the wrong fabric and the color of the flaps, which are most often in the bedspread. Thus, two types of thread will be enough.
3. Sewing machine with needles and pins.
4. Tailoring scissors.
5. Knife over fabric.

How to pick up flaps

One of the most difficult and important tasks in creating a blanket is to properly pick up the colors of the flap. It is necessary that they are combined by tones. All this depends on the taste of the master. You can create a bedspread from two types of flaps, but more interesting from more colors. Here it is necessary to be very careful.

Patchwork covered from two shades

Fabrics for flaps are desirable to choose monophonic. It is best to combine 30 pieces of pastel tone and as much dark. If the choice serves nevertheless on the tissue with the print, it is better that it is pretty small and only on light fabrics.

If you have no clear idea, take advantage of the following combinations of colors for your work: lemon-caramel bedspread, pink (milk) and bordeaux, ivory flaps can be combined with black chocolate. The texture of the web is chosen completely to the taste of the master, the main thing is that all the flap and thickness are the same in the same.

For multicolored creation, several shades of tissue should be selected, not neglecting, however, the advice of experienced craftsmen: not to use more than seven different types of flaps. At the same time, the main thing can be only one color of the flasks, the rest should be significantly less in quantity.

Applicable to the above-mentioned bedspread format, 25 of 60 flaps should be one dominant color. The remaining colors should be divided between the remaining 35 flaps, while they will not necessarily be in the same amount, it all depends on the desired pattern as a result.

Select the same shades that are suitable for the lead, the easiest way to select additional colors to the main one.

Perhaps the most difficult stage - the choice of fabric, already passed and remains only to sew everything together. This process will be even easier and will not create problems and difficulties even for beginner masters. The only requirement at this stage is patience, the creation process is quite protracted.

Step 1. Preparation of fabric - decatting. It turns out as follows: all pieces of fabric should be excluded, dried and hard to try.

Cotton materials are also recommended to stumble, and silk fabrics omit for some time in the gelatin solution. Such operations are carried out in order to facilitate further work with tissues: as a result, they become more rigid and keep the form better.

Step 2. Before starting the line, you should try, whether everything is correct: whether the threads, needles are suitable, whether it is easy for a line. We advise you to read.

Step 3. After the loskuts are cut, you can start crossing. To do this, you need two future adjacent flap of different colors to fold together to each other and, retreating 1.5 cm from the edge, strain on one side.

Next, you should sew another third color flap and it is still 3 times until a multicolored strip of 6 squares. Such strips need to create 9 pieces, after which it is necessary to stroke the seams.

Step 4. After that, you need to run the stripes. Two estimated neighboring bands folded together face to each other, connect using a pin.

Rounding from the edge of 1.5 cm, stroke on one side along the length of the strips. Next, you need to get the pins, decompose the result and again to block all the seams. Repeat the procedure with all the strips to get a single cloth.

Step 5. Already the finished facial part of the flasks must be put up with an invalion, to put a synthetic trungeon from above.

Since the patchwork is significantly lost in size, the lining will be slightly larger than the web, so it is necessary to place it evenly so that on each side the same number of synthetics remains.

Secure both panels using a pin. After that, it is necessary to sew a lining to the flaps, it is important that the lines coincide with each seam between the flap and strips. As a result, a neat square stitch should be obtained.

Step 6. The resulting canvas should be attached to the involve side to the exhaust of the remaining third fabric, which will serve as the second side of the blanket.

As in the previous paragraph, the size of the canvas will be less than the harvested fabric, so it is necessary to post all evenly, fix with pins, it is necessary to start.
The remaining tissue from all edges must be adjusted to 1.5 cm inside out and notice. When such work is performed on all sides, it is necessary to remove the backbags and stitching the fabric. Remaining corners to be used yourself.

Such a rather unchivery way you can create an original patchwork-bedspread. Squares are one of the easiest ways, there are, of course, and more complex types of such sewing. It will be originally looked from denim.

Denim patchwork covered with her own hands

Very often we update your denim wardrobe, and you feel sorry for old clothes. With the thought "What if it is useful?" We hide old pants and jackets deep into the closet. Patchwork-blanket - just that time when the time comes for the second life of old jeans.

To create such a creative product, you will need an unnecessary denim fabric and a web any other for inside, the only requirement for this part is the cloth must be about the same by density as jeans.

The dimensions of the future bedspread remain completely at the discretion of the wizard, because it depends on the amount of denim flap existing in the reserve. After all the pieces of the future covered are cut, you should do the same work with a lining tissue.

As a result, the same amount of denim and tissue squares should be obtained. Each of them should be folded with pairs of insert to each other, after which you can go to sew.

Two pairs of such flashes lay down the lines inside so that the denim fabric remains on both sides of the flap. Having retreated 1.5 cm from the edge, all four fabrics need to be searched on one side. Now you can disconnect two flap.

Punches for seams should turn out from the front side, and even seam on the contrary - with the wrong one. The remaining loskutka should also be searched in pairs - it will be the material for the future blanket.

After that, all pieces need to sew in one large canvas. And finally, it is necessary to flash covered on all its parties, retreating 1.5 cm from the edge. It is desirable that this stop is double, that is, the seam in the seam.

However, this is not all. Take the most sharp scissors so that they can cope with the four-layer cloth, that is, with the remaining allowance with the front side of the canvas. It is necessary to make cuts on allowances throughout the canvase.

Everything needs to be done very carefully, not behind the seams. The distance of the slots should not be less than one and a half centimeters. After the operation done, all cuts need to shake hands.

In conclusion, Patchwork covered from jeans must be combed using a metal brush. Gently combing every seam, you will receive a magnificent fringe, our own production.

This will not only give an aesthetic appearance, but also contributes to the fact that the bedspread will be longer to serve. If such an option seems to you too non-accurate, then the edges can be tied up with the hook.

One day, holding a needlework in the technique of Patchwork, it is already impossible to stop. You will certainly want to create more, develop new techniques, decorate your home with handwork and delight close to creative gifts.

Patchwork bedspread video

Master class - how to make stitches covered