How to choose a thread for embroidery with a cross: 6 rules

A multi-colored or monochrome composition on the fabric requires the masters to choose a thread for. This is done with several interrelated factors. The density of the base (canvas) and the overall required density of the thread per unit area are taken into account. Extresting this list of aesthetic factor. For the embodiment of some projects, threads with certain properties are required.

Proper selection of threads for work

The most common type of thread for embroidery with a cross is Cotton Moulin. It is characterized by the material with increased wear and gap strength. Regardless of the color, the thread on the counter is in the form of motors (pass).

The average length of a single parcel ranges from 7 to 10 cm. Much depends on the parameters selected by a specific manufacturer.

Regardless which brand I liked the potential buyer, it can always count on the following operational characteristics:

• Over time, even embroidered with golden filament can not hang out;
• Wear resistance material gives 6 thin threads combined into a common structure;
• The material does not learn;
• Withstands long-lasting washing in hot water.

The use of similar threads is due to their physical characteristics. In second place there are woolen threads characterized by volume. It is recommended to take them only in case of working with a dense canva. In order to simplify the selection procedure, the threads received certain numbers. What it is more, the denser is required for the stitch base.

The main direction for application is the creation of pillows, carpets and tapestries. Initially, it may seem that wool is not the easiest material for work. In order to make sure that you can see the thematic video review or visit the master class.

Tips how to calculate the number of threads for cross-embroidery

If everything is relatively simple with woolen and cotton threads, then it is more difficult to calculate the required amount of material when it comes to acrylic threads. Cotton and woolen threads are sold in Passes, of which the required amount is extracted. In this case, you can choose a length in the store at the time of purchase. The minimum threshold is 5, and the maximum is 100 cm.

When working with this material, there are some features, to consider which is better before the start of the embroidery:

• In order to avoid frequent failures, it is necessary to abandon the use of too long woolen passages;
• The novice is recommended to pay attention to the segments of 25 to 35 cm;
• Bole experienced craftsmen need to take the threads whose length ranges from 50 to 85 cm.

Most difficulties is the selection of threads to work with tapestries and pillows. In addition to the correctly selected scheme, which takes into account the density of the material and the degree of saturation of the canvas with color stains, it is necessary to carry out the calculation of the total amount of threads. Make it is quite difficult, but still possible. More or less accurate consumption for embroidery allows you to get accounting the specifics of the thread itself.

Acrylic, like woolen, threads are characterized by saturation. In most cases, the needle forms the required outline from the first time.

If we are talking about a thinner circuit, for example, the emblem of the Zenit Club, then in this case, for each stitch, it is necessary from 2 to 3 cotton threads. Their brand does not matter.

A beginner needlewoman does not always know how much material is needed to embroider the desired drawing. It is not worth a hurry with the purchase, because the money will not return the money for the non-demanding threads. It all starts with the number of colors. Monochrome pictures require less material. The work is performed by black and other similar shades.

For example, rich in detail boxing or graceful girl on the lap of nature will require from 20 to 25 ease. It all depends on the desired degree of detail.

1. Cotton - Not only thin, but also economical. It is enough to purchase one or two passes for a small size.
2. Silk Passy - require the greatest consumption per unit area. At least 3-8 ease.

Cross Embroidery: Rules for Storing Threads

It is easiest to store threads in ready-made sets, for example, a craft series allows you to quickly find the necessary tool or color in the box. If the threads are purchased separately, their storage must be organized independently.

In order to properly choose which easy to store, simple rules should be remembered:

• The use of melange threads is not frequent, so the organizer for them removes the far corner;
• Fans of detailed paintings, the creation of which implies a large number of colors, use a set of 1047, where everything is already decomposed;
• Do not mix tight types and thin;
• If the technique is often used, the main and thread fixes are stored nearby.

Overview Threads for embroidery cross (video)

The quality of the material used to create the necessary composition depends on the speed of the performance and durability of the composition. The density and type of threads are selected with the color and physical parameters of the work. If masters have any difficulty, then you just need to get acquainted with the physical parameters of the material. Based on the information specified there, the threads are selected.