Design of built-in corner cabinets. Corner wardrobe coupe in the dressing room, bedroom, hallway

For a long time, the cabinets are an integral component of each house. They have undergone significant changes, complying with the requirements of functionality and new technologies.

The predecessor of the furniture object under consideration was shirma introduced by Napoleon, dissatisfied with the untidy barracks. Later, the enterprise Americans gave to replace the partition with a door that was going to harmonica. Then the same Americans guessed to attach to the chain door.

Gradually, the furnishing was improved, its composition became more complicated, new materials and technologies were applied. As a result, modern models appeared that meet the requirements of multifunctionality, creating comfort and well-being in the house.

Advantages and specific features

The device of the door moved during the opening process along the wall on the guides is the distinctive feature of the coupe. Such doors are moving away or folded by the harmonica, without requiring free space for themselves, like ordinary cabinets.

The preservation of non-busy space will be a significant plus of corner cabinets for small apartments. The difference will also install an angular cabinet as a single set between adjacent walls.

Sufficient capacity is an indisputable advantage. Different items and things can be located throughout the accommodated space, despite the fact that the closet itself takes a small area.

The angular cabinet is universal, which allows you to choose it to apartments of any design, which contributes to the provision of photos of angular cabinets by any specialty stores and salons. The ratio with the decoration of the room can be provided by mirrors or image, photographs and other decorative parts.

The angular cabinet can always be ordered at a conceived price from the catalog of angular cabinets, and this is its undoubted dignity.

Selection of corner cabinet

There are a number of nuances that should be revealed if you are going to buy a corner wardrobe. A careful approach will serve as a choice of functional, practical furniture with a long service life. We will analyze some of the aspects.

Important will be the definition of structure and raw materials, as well as the cost. You should not stop on cheap versions, as they will most likely have hidden or explicit flaws that sooner or later show themselves, reducing the term of use and creating unnecessary troubles.

Another point is the internal content that you need to pick up so that it is convenient and practical for you.

Compliance with interior

In stores you can find a lot of variations of corner cabinets, so it is often difficult to find a suitable model, because this piece of furniture is designed to serve for many years. For this, the combination with the interior is important.

In the style of minimalism, the most suitable will be the rigor and contrast of geometric shapes and colors, which will indicate the order and absence of excesses. By analogy, you can also purchase a classic style model or for modern design.

In general, the angular cabinet is designed to ensure rationality, do not contradict the features of household owners and design of the premises, plus the opportunity to accommodate everything you need, including clothing, shoes and household appliances.

Installation in different rooms

Angular wardrobe can be placed anywhere, but in different rooms this piece of furniture will have not the same purpose, that is, it will be necessary to be the feasibility of its content.

Thus, the corner wardrobe in the hallway will be useful to equip the hanger for casual clothes and the shelf to accommodate shoes (a good option in this case will be oblique shelves from wire for ventilation). It does not hurt and highlight a place for household appliances and other accessories.

In the bedroom, the wardrobe is usually provided by shelves for storing casual wear, bed and other accessories. Here will be the best provision of rods for hangers - it will be easy to get to the desired thing and not to memorize clothes during storage. Various drawers for trifles, socks, underwear, accessories, belts, ties will be comfortable.

In the nursery, it will hold not only clothes and all sorts of trivia, but also toys, books, sports accessories and much more. Here you should pay attention to the fixation of all the shelves and boxes at a suitable height. The main thing when buying a children's wardrobe will ensure security and comfort.

The cabinet in the living room among other things can help with organizational moments, and its original design will improve the appearance of the living room. Filling must be selected in accordance with your own needs.

Some varieties

Several cabinet configurations:

triangular;
trapezoidal;
M-shaped;
five-rank.

There is a combined model that combines several species.

Triangular

Such a form of an angular cabinet, as a rule, is operated without side walls, so the internal content is attached to the wall. The triangular closet can brighten the corners, give a special harmonious atmosphere.

The subspecies of triangular corner cabinets will be a radius wardrobe. Its originality is that the door has the shape of a semicircle provided by the guides. In this case, the door can be both convex or concave and wave-like.

Trapezoidal

One side of such a configuration provides for the presence of a side wall, so that the design itself looks from the side as an incorrect trapezium. Non-standard attitude to filling with the use of add-ons will effectively use the space inside the cabinet.

M-shaped

The species in question is most often found, as the form is universal, it can be chosen for any room. The M-shaped cabinet form two connected highway cabinets.

Five-colored option

A five-stranded configuration is a slightly connected side walls. This form is an extraordinary model that allows it to supplement it if necessary internal elements.

Also, angular cabinets may have a built-in or body structure.

Built-in structure

The advantage of embedded angular cabinets is rational filling of space. However, if it becomes necessary to change its location, the owner will be forced to break everything and do it again, which will certainly be minus.

This species has no rear wall, attached to the wall and does not give dust to accumulate. Consequently, when cleaning, this design has an obvious advantage compared to others.

Cabinet

This design consists of the basics, ceiling and side walls. Its unconditional advantage is manifested when it becomes necessary to change its location. The disadvantage of construction will be inconvenience when cleaning and the emergence of additional costs for each wall.

Colors

The visual perception of furniture and premises in general depends on the color solution. It is better to choose a flavor that is harmonizing with a natural tone of the tree and, of course, with a color scheme in the room.

At the same time, the contrast of the room and the cabinet will look good: the bright room is a dark cabinet, and vice versa. This approach will allow focusing on this object of furniture. Also, the surface of the furniture can be decorated with any patterns.

Selection of material

The service life of the coupe depends primarily on the duration of the use of a moving mechanism. It is this mechanism that is most susceptible to external influences and it is he will be the most fragile part of the design. Therefore, when purchasing an angular cabinet, the coupe should pay attention to the raw material from which this part is made.

It is also important that when opening the door should not arise any extraneous sounds. Guides can be steel or aluminum. The second possess higher quality, and, accordingly, higher price.

The body is usually made of wood, MDF or chipboard. Such raw materials provides protection against moisture, sun and other influences. You can also be separated by laminate. The best quality and most expensive rates are environmentally friendly materials.

Filling

Conditionally interior space can be divided into the upper middle and lower parts, which are designed to store different items and things.

Filling can be from all sorts of shelves, cells, boxes, rods, hangers, baskets, niches and other things. At the same time, their location, sizes and quantities need to be chosen based on the items and things for which it will be intended.

But there are general guidelines for filling - components exceeding 60 centimeters in width during operation, as a rule, sag. Thus, you need to most optimally choose the width of the components, not rushing from the extreme to the extreme, and choosing a gold middle.

Constructive add-ons

Elements that are additions to the base must ensure the simplicity of accession to it, as well as convenience and practicality of the application. As a rule, these are open and light glass, plastic or wooden elements that add access to the overall appearance of the room.

An interesting addition is to provide good visibility internal illumination. It is important to comply with the harmony with the main lighting of the room.
Independent assembly

Manual assembly of such a cabinet is pretty simple and quite performed, you only need to choose the right to choose the basis, fastening and responsibly approach the process itself.

To assemble the corner cabinet with your own hands, you first need to determine its location to correctly calculate the dimensions. Then you should choose the model - the built-in or body.

Special attention should be paid to the topless (without thoroughties) or the lower historical (as a rule, from drywall) guides. The structure of the entire design as a whole depends on the selection of the guide system as a whole.

Materials need to choose good quality, pre-acquire the necessary and additional details in advance, placing their location in the closet and taking into account its configuration. When carrying out measurements, recommends rechecked to avoid mistakes and secure the design.

Photo of angular cabinets

The cabinet of the coupe of the corner type is very in demand among buyers around the world. It is highly functional furniture that allows designers to create comfortable and beautiful interiors in residential premises of various purposes. Further, how should an angular cabinet should be, features, whose drawings are collected in the selection.

Cupboards are able to solve the issue of storing the wardrobe of the person in the bedroom, kitchenware in the kitchen, outerwear and shoes in the corridor. Such models are characterized by good capacity and practicality. In addition, for rooms with non-standard geometry, angular structures will be an excellent option. They allow you to smooth out the wrong shape, giving the room a more concise look.

A feature of such furniture for the bedroom or children's room is considered the nature of the placement of shelves and storage systems inside. It is also important to pay attention to the selection of the corner cabinet coupe. There are models inside which the shelves are placed one above the other. That is, the shelf itself has a non-square, but a triangular or trapezoidal form. A plus of such structures, as represented in the photo, is their large capacity, but also there are also cons. The disadvantages of triangular shelves include inaccessibility and low comfort for the user, since in the case of a deep cabinet to get to things in the corner of the shelf may be difficult. Yes, and drawers in such closets can be made not to the entire area of \u200b\u200bthe angle, but per square or rectangle, which will fit into it. You can also choose the product, behind the doors of which the shelves are located on the two walls g sampled. This location of storage systems allows you to conveniently arrange a wardrobe of several people, place special devices, for example, the ponder, zonate the inner space of the cabinet.

Kitchen corner cabinets coupe allow you to hide ugly pipes, wires, irregularities of walls, unsightly trash can. Often it is the angular models that are applied to the sink, which is demonstrated in the photo.

Standard dimensions

Experts insist that the first thing that is important to think about the selection of an angular cabinet is its size. After all, angular cabinets may have standard parameters, and can be manufactured under the order by a prepared project with specific measurements. The first option is characterized by lower cost, versatility, practicality. No longer wait for a long time until the manufacturer creates a closet of non-standard size for you. It is enough to choose a ready-made model in the store with the desired parameters, the design of which fell in the shower.

Triangular

If the room has the right form or decent dimensions, it is worth choosing a triangular corner wardrobe. The optimal length of the parties in such a triangular cabinet will be 1.2 m. If you make the sides of the design too small (for example, you can sometimes meet models with sides of 1 m), then the product will be low-functional and not very compatible. If too large (for example, 1.5 m), the furniture will be overly cumbersome. The minimum depth of such a cabinet is 0.4 m, and the maximum - 0.6 m. Often there are angular triangular cabinets with a depth of 0.45 m. At a depth of a model of 0.6 m, specialists are advised to cost the usual crossbar to accommodate dresses on her shoulders. If the depth of the product is 0.4 m, you will have to apply a special bar, allowing you to place the hangers parallel to the doors. Standard hanger with a width of 0.55 m is simply not fit in a shallow closet.

For a small-sized triangular corner cabinet, it is better to prefer to the shaped arrangement of the shelves, since such filling of furniture will not be massive, will leave enough space for comfortable use of the room. To evaluate this visually, experts recommend to draw all types of wardrobes on a particular room plan. Such drawings make sure to accurately calculate the area of \u200b\u200bthe remaining free space.

Diagonal

If you consider the cross section of such a wardrobe compartment, it will be triangular, but the sides of such products will not be the same. Diagonal models are used for rooms with several doors or window openings located on the adjacent walls. The parameters of the corner cabinets of a diagonal type compartment for the average residential premises of the urban apartment are described in the table.

The optimal height of the diagonal model for the urban apartment is the height of 2.2-2.5 m, since often the ceilings here have a height of 0.3-0.4 m. That is, 5-6 shelves fit inside.

When choosing the number of doors for a diagonal cabinet, experts recommend repelled from its width. If a wide construction is selected (for example, 2.2 m), it should have three coupe doors (approximately 0.7 m each). It will take the model with a maximum level of comfort.

Trapezoidal

The trapezoidal form of angular cabinets is great for children's rooms, living rooms, kitchens, offices. Such structures, as demonstrated in the following photo, are applicable even in a tiny input group, where every meter of free space on the account. But due to the impressive depths, they are more recommended for installation in spacious rooms.

The level of capacity of such a model will be somewhat higher than at a similar diagonal cabinet. It becomes clear if you consider photos with a graphic image of compared structures.

Standard sizes of the trapezoidal cabinet: the length of one wall is 1.2 m, the second is 0.8 m. On a longer side, a partition is installed with a depth of 0.45 m, and a straight line is carried out to a short side. If the wardrobe is selected for the installation of washing in the kitchen, then 0.85 m is considered the optimal height of the countertop, the length of the side walls is 0.9x0.9 or 1.0x1.0 m, and the depth is 1-1.2 m.

The design of the trapezoid chain chains for the kitchen is concise and unusual at the same time. The dimensions of such structures are standard: 0.6x0.6 m.

Radius

Radius cabinets of angular type are characterized by a higher level of capacity due to the fact that the doors in such furniture are not flat, but a few convex outwards. The door leaf moves to the side not by direct guides, but by half a quarter, which allows you to give the subject of the interior unique design. You can estimate the beauty of radius structures in the following photo.

It is easy to enter such a construction in a residential premises, because they, like other types of corner cabinets, are manufactured in standard sizes. The height of the radius cabinet for clothing can vary from 1.8 to 2.4 m, the width is from 1.2 and to 2.1 m, and the depth is from 85 cm and up to 1 m. If we talk about the cabinet to the kitchen coupe More often manufacturers offer models with parameters 0.9 to 0.9 m, 0.85 m height and 1 m deep.

But for narrow spaces it is better not to pick it up. Radius models require a slightly more space than products with flat doors, so it is necessary to optimally install a radius wardrobe in a spacious living room. In addition, the more complex design of the sliding system affects its value. Radius models are sold at higher prices, so used mainly to create original respectable interiors. In the bedroom with budget repairs, the design of which is made as simple as possible, buying this furniture is irrational.

Non-standard sizes

The angular models of the non-standard size coupe or form are particularly relevant for narrow premises, where there are very few spaces, or the rooms of irregular shape with a free angle. But it will not be possible to choose a non-standard scale of the angular cabinet in the furniture store, because the mass production furniture is focused on the premises of standard dimensions.

What should I do if you need an original subject of the interior if you want to give your home a unique design, refusing a shortened forms, internal fillings and standard furniture sizes? In such a situation, you can refer to manufacturers that create furniture products to order. With their help, a project is created, drawings with dimensions, a scheme of its assembly. We describe the possible deviations from the standard sizes of the compartment of the corner-type cabinets.

During the arrangement of his dwelling, the maternity hosts are trying to build their life in such a way as to maximize the living space and create a comfortable room for accommodation. In a modern apartment, it is always necessary to place a large number of different furniture, household goods and household appliances. Filling a house with a mass of the necessary and useful components in order not to clutter the precious living space, it is necessary to take care of their comfortable and cozy placement.
The practical and convenient solution to the optimization of space is the installation of an angular cabinet compartment. In any apartment there are empty sections that over time can turn into places of accumulation of old things. In particular, it concerns the corners placed behind cabinet furniture. Use such valuable areas of the walking space allows the arrangement of the corner cabinet compartment.

Cabinets have long appeared and are an integral part of the interior of any apartment. Their form, dimensions and filling changed over time, with the emergence of new technologies and requirements, to this subject of furniture. In addition to decorating housing, the furniture should perform the main task that consists in its maximum functionality.
The appearance of a modern cabinet has been rooted during Napoleon, which was displeased with a disorder that reigned in the Military barracks, leading uniforms in an unsuitable and untidy look. He ordered to equip practical places for storing things hidden from unauthorized eyes with a special screen.
Enoneling Americans were the first to replaced the screen on the folding harmonica door, and then thought to put it on the wheels. Due to which the closet began to close the full door, which when opening did not clutch the room. The convenience of sliding doors was assessed by merit and therefore gained great popularity. Such devices outwardly remotely resembled modern wardrobes of the coupe, equipped with doors and a variety of additional features. For many decades, designers in every way improved comfortable and practical furniture, complicating their design and using the latest materials and devices.

Modern wardrobes of the coupe are complex multifunctional structures that occupy a worthy place in a modern housing. Thanks to the latest technologies and efforts of designers, they were brought to perfection, their external appearance is able to become a decoration of the house, visually increase the space. The harmonious appearance is perfectly combined with the ease of use and the ability to accommodate a large number of different things or wardrobe items. A large number of additional functional attributes allows you to use all the space of the cabinet, not leaving free corners.
With a good room, placed in the room, the wardrobe does not overload the space and takes the minimum area. In particular, it characterizes the angular models that rationally use the occupied place and organically fit into any interior.

General differences

The corner wardrobe is installed between two adjacent walls and is a single design. Such cabinets make it profitable to beat, usually empty room angles, making their space useful and involved. Any building defects of walls and corners or plumbing communications can be hidden behind the installed design.

The main distinguishing feature of the cabinets of the coupe is an unusual door device, which when opening moves along its surface, according to a special guide. This door design can be sliding or folding harmonica, for any of them, when opening, you will not need free space. In conventional wardrobes, to access the inside, there should be enough space for smashing doors. The sliding design allows you to install any furniture close to the door and at the same time revealing, they will give maximum access to everything inside the cabinet. The cabinet coupe corner has a special design solution, so some models can be simultaneously equipped with the doors of various types, sliding and swinging.

The biggest advantage when installing the cabinet coupe, is its striking capacity. Having occupy a very little place in the room, it is capable of effectively visually saving space and at the same time surprising the possibility of practical placement of a large number of different items of everybody and home utensils. From the purpose of the angular cabinet, its functionality and internal filling, which can be the most diverse are depends on: large spans with crossbars for hanging things on her shoulders, wide or narrow shelves, drawers and other functionality.

To buy an angular wardrobe, it is necessary to determine the basic criteria for which you need to pay attention. Thanks to this approach, the cabinet will be functionally comfortable, organically fit into the interior and will last for many years. The main criteria include:

The variety of models of cabinets and their components presented on the market allows you to choose exactly the complete set, which is necessary to create a successful and practical interior.

Classification of models

The modern furniture market allows you to purchase a ready-made cabinet model that will take a worthy place in any room. Before you buy an angular wardrobe, you must make sure that its sizes are suitable for the parameters of the apartment and other objects of furniture, and the appearance will organically fit into the interior of the room. Cabinet models have a base, ceiling, side and rear walls.

Such models are separate and equipped with standard internal filling, with the presence of all necessary crossbars, shelves, drawers and niches. Such equipment does not always coincide with the personal requirements of the filling of cabinets. In this case, you can order the manufacture of a corner cabinet with a coupe, taking into account all personal wishes.
Due to the wide selection of components and facade materials, you can make a model of any configuration, according to individual sizes suitable for a specific interior and with internal filling required functionality. Custom cabinets can be separate or built-in, it depends on the personal preferences of the customer.
Each of the designs has its own positive and negative sides to pay attention before making a certain choice. The location of separately standing models can be changed, when the built-in wardrobes are installed once, and it is not possible to rearrange them to another place. Therefore, for fans of permutations in the house, models will be suitable, which can be moved.
Built-in structures are attached directly to the wall and on the back does not have empty spaces in which dust accumulates. During general cleaning, a separate, bulky and heavy wardrobe, it will be necessary to move to get to the pollution sites. It is not easy to cope with such a task, and alone is impossible. In this case, it is better to stay on choosing a built-in model, the care of which is simpler.

Materials

The durability of the cabinet design of the coupe ensures the quality of moving mechanisms, they are primarily able to fail. Therefore, it is not worth saving when choosing these components. Rollers fixed on the doors must have a soft mechanism of walking and not to publish outsided sounds when driving. This mechanism should work clearly and smoothly. It is not necessary to hope that over time it is developed or dried, everything must be devoted initially.
Guides for rollers are made of steel or aluminum. Aluminum tracks are more durable, but the price of such a mechanism is much higher than steel. Therefore, buyers often choose a cheaper option, while it is necessary to be prepared for the fact that the quality directly depends on the price.

Modern manufacturers offer a large assortment of finishing materials, from the quality and properties of which the appearance of the corner cabinet has depends on the coupe. In the manufacture of furniture, the customer has the ability to choose any material itself, depending on personal preferences or the need to match the overall style of the interior. The cabinet case is made from MDF, chipboard or natural wood.
For the manufacture of doors, life can be applied: MDF, chipboard, natural wood, plastic, tempered glass or mirror surfaces.
Environmentally friendly natural tree is the most expensive and high-quality material. The door surface made of tempered glass or mirrors will make a room visually greater, spreading the space and filling the room with air. When choosing such a material, it should be borne in mind that the doors will need more thorough care, and its low strength will require accurate circulation.

Most often for the manufacture of doors use MDF or chipboard panels. These wear-resistant materials have long and merit appreciated manufacturers of cabinet furniture. Such panels are easily processed, resistant to moisture and the sun, allow you to create any form of doors, making it reliable and durable. MDF is a safe material, and when using a chipboard, it is necessary to carefully check the quality and degree of reliable protection against the possible effects of harmful substances that are included in the adhesive base.
The rich color palette of all materials allows you to create any visual perception of the cabinet compartment. Choosing dark and bright tones, on the background of a light interior, the cabinet will focus on attention, creating the effect of the monumental and significant object of furniture. Bright shades, or glass or mirror doors, fill the room with ease and grace. You can use various materials by combining them and complementing, each other.

The application of the latest modern technologies allows you to make the facade of the corner cabinet the coupe is unique. Photographing technology allows on any surface door to apply a picture. For this, a favorite picture or photo, an arbitrary abstract pattern or composition, a natural landscape or a fairy-tale plot can be selected. Such cabinets perform a special aesthetic function, creating the mood and atmosphere of the room. Applicated images have special durability, do not erase and do not fade, do not spoil from temperature drops and under the influence of moisture.

The use of sandblasting technology for applying drawings on the surface of glass or mirror allows you to create surprisingly delicate and original images. Doors with such decorative finishes are brought into the interior lightness and become a real decoration of any room.

For the execution of the front side, the laminate is practically used, which, thanks to the coating of a durable film, will reliably serve for many years. Modern materials presented in a wide range are able to fit into any style of the interior and make an angular wardrobe with a decoration of the room, high-qualityly performing all the functions assigned to it.
By purchasing the body model of the corner cabinet, the coupe must pay attention to the quality of all its components. Sometimes manufacturers, trying to reduce the price, use cheap accessories, which significantly reduces the service life of the product. Buying an angular cabinet IKEA can be confident in fairly good quality acquired goods. The company produces a huge variety of models, with a classic configuration of the inside. The furniture is easily going and can be equipped with any additional module. The angle cabinet ICEA has an ergonomic appearance, so it will organically fit into any style of the interior, emphasizing its refinement and restraint.

Inner world

Being an ornament, for the room, the main requirements for any corner closet of the coupe, is the set of functionality assigned to it initially. It depends on the internal filling, i.e. the set of standard elements, in different combinations. The main components fill in the inner space of the cabinet include:

The main materials of the manufacture of all internal elements are chipboard and aluminum wire covered with polymer paint. For some elements it is possible to use plastic, cheaper and soft material. Aluminum wire elements allow you to better circulate air inside the cabinet, not giving things to lie down, which is especially important with long-term storage.
For convenience and ergonomics, internal filling is provided with special mechanisms: Pantograph elevator, rollers, wheels and lifts. Such mechanisms allow you to use all the internal space of the cabinet and make the process of extracting things easy and convenient. Thanks to them, the ideal order will always reign in the closet, and each thing will have its permanent place. The presence of such mechanisms significantly increases the price of the acquired furniture. Therefore, if you wish to buy an angular cabinet, the coupe must be inexpensive on the most necessary set of such elements.

The corner wardrobe with a variety of fittings and special mechanisms will allow competently streamlined clothes, shoes, various binding items and home utensils. The configuration of various elements inside the cabinet has depends on the room of its placement and the requirements of the hosts. In advance, it is necessary to thoroughly think over the required number of different elements and their location. If necessary, you can change something or add something, but it is more correctly thought out in advance. It is convenient to create a detailed drawing that allows you to look at the future cabinet in advance, and place everything you need correctly and competently.
An example of a possible circuit of the corner cabinet in the photo inside with dimensions and placement of filling:

In the photo of the circuit of the corner cabinet with a compartment inside with sizes and its finished prototype:

Configuration of corner cabinets coupe

The shape of the corner cabinet coupe can be diverse and is able to compactly fit into any size and interior of the apartment. Stripping from the individual configuration of the room, you can choose this option that is profitable and unusually involves free angle in the room, making it the area useful.
The main types of angular cabinets include:

You can select the combined form of an angular cabinet that allows you to supplement and combine the main types to maximize the entire free area of \u200b\u200bthe angle and make furniture individually and comfortable.

Corner wardrobe in various rooms

The placement of the corner cabinet the coupe is appropriate in any room, the filling of various functional elements depends on the location of its location.

Parishion

The corner wardrobe in the hallway must have an open hanger, for the placement of things of daily use, and shoe shelves. Practical use of advanced shelves for shoes located under the tilt and made of wire. Such shelves give a complete overview of the content and provide good ventilation.
Comfortable and practical angular cabinet in the hallway Photo:

The angular cabinet of the coupe into the hallway usually has a small depth, so it is convenient to use end-to-step guides to accommodate the shoulders. There are always many different small supplies in the hallway, the placement of small drawers will streamline them.
If the size of the cabinet allows, then it is practical to equip the economic unit, for convenient storage of household appliances and accessories: a vacuum cleaner, iron, ironing board and so on. For this there are special fasteners, thanks to which all economic accessories will be securely and compactly placed. The upper hard-to-reach mezzanine is convenient to use for the storage of seasonal and rarely used things.
Corner wardrobe coupe in the hallway Photo:

Bedroom

If a separate dressing room is equipped in the apartment, then there is no need to place a wardrobe in the bedroom. But in ordinary apartments there is no possibility of a device of such a separate room, so its function is performed by a wardrobe. It is more convenient and practical to install the corner wardrobe coupe into the bedroom to place all the necessary things and bedding. Filling such a cabinet must be designed to place a large number of hangers with things. Conveniently, when each thing hangs on a separate shoulder, it provides easy access to them, they are clearly visible and not impenetted when stored. The height of placement rod must be different, it is convenient for hanging things having a different length. For dresses and suits it is convenient to use a large height of the location of the rod, for blouses and shirts you can place rods at a lesser height. Such a solution will allow to significantly save space in the closet and make a larger number of wardrobe items.
Interior filling of the corner cabinet in the bedroom Photo:

The corner cabinet to the bedroom must contain, small in size, drawers for storing small accessories of wardrobe, underwear and socks. For convenient storage of ties, belts and trousers are provided for special hangers, allowing these items ergonomically. For bed linen you can use wide shelves, and for storing items of rare application the upper part of the cabinet. For the corner cabinet, the coupe in the bedroom is appropriate for the laundry baskets and shallow boxes with separators.
For trimming of the cabinet doors in the bedroom, any material is used, which organically fit into the overall interior. Convenient installation of mirrored doors, it makes it possible to use it as a large mirror.
Corner wardrobe in bedroom photo:

The rational use of the area is task No. 1 with the arrangement of any room. The classic furniture does not always cope with it. The solution becomes an angular cabinet. It will take a room that usually remains free. More recently, such a product could only be fulfilled under the order, now in stores there are different options for angular models.

Corner Cabinet - Design Features

Such furniture has a number of indisputable advantages, but not devoid of weaknesses. Preferably before making a decision to weigh all the arguments. The following information will help make the right choice and avoid many unpleasant surprises.

The advantages of the corner cabinet refers:

good capacity;
compact dimensions;
saving space;
different ways to perform facades;
the possibility of organizing a rational storage system;
the way to visually smooth the disproportionous forms of the room.

Cons of such a model are as follows:

not all sections of the cabinet are equally convenient for use;
higher cost than standard items.

For the premises of unusual geometry, it is quite difficult to choose a suitable cabinet that will fully comply with the requirements. Most likely, the furniture will have to be ordered that, of course, add the uniqueness to the interior, but will increase material costs. In addition, it will take time on its manufacture.

Forms of angular cabinets

The design of the corner cabinet is distinguished by a variety of forms. The most common the following options.

L-shaped furniture object has 2 sides of different lengths. This approach contributes to a visual change in the parameters of the room and the optimal use of the area.
Furniture formed in a horizontal section of a triangle will delight the large internal volume and affordable price. But at the same time, a significant area of \u200b\u200bpremises will be required for its installation. The consists of the presence of triangular shelves can also be attributed to the minuses. Most suitable for square rooms.
Pentagonal design provides greater capacity, as it allows you to better organize a storage system. Optional items (rack, cabinet, chest) can be postponed on the sides.
The docking option consists of individual sections. At the corner location, a compartment consisting of 2 modules is established. Access to internal content provides a rotary door mechanism. The deaf side can be on the left, and on the right, depending on the location of the adjacent elements.
The radius facade gives the product ease, makes it visually more compact. The model may have a convex, concave form or combine both types of both types, forming a wave-like line. However, the cost of such cabinets is quite high.

Types of constructions of angular cabinets

By the installation method, the following types of angular cabinets are distinguished: built-in and case.

In embedded furniture, part of the structural elements replace walls, gender and ceiling. Therefore, it is necessary to conduct preliminary actions to equalize surfaces at the installation site. If this is not done, there will be a challenge in a short time, which makes it difficult to use the cabinet.

The advantages of such furniture include:

lower cost;
maximum fit to the parameters of the room;
saving space;
stability.

The weaknesses of the built-in wardrobe: there is no possibility of free movement, the attachments violate the integrity of the walls at the installation site, the high complexity of the installation work.

Cabinets are completely finished products. They consist of all the necessary elements: side walls, rear panel, bottom and lid. They can be installed anywhere, and if necessary, transfer to another room. At the same time, they need more space, and the capacity is lower than that of the previous type.

Depending on the location of the location, outdoor and attachments are distinguished.

The mounted type is suitable for installation in the kitchen or in the bathroom, allows you to rationally use the angular space. In shape, they are M-shaped, trapezoidal, with beveled corners and perfectly complement the other furnishings of the kitchen headset.

Outdoor design is suitable for any room. It can be open or closed, and easily fit into the interior, regardless of the room area. The product can be located on the floor with the entire surface or rely on the legs.

How the carcass frame is arranged - elements, materials

Angle cabinet frame includes sidewalls, back wall, upper and lower horizon. For their manufacture use traditional materials:

the tree is rarely used, this is due to high cost and high weight of finished products;
laminated chipboard allows you to make furniture available in terms of price, and its surface is performed in different color solutions and textures;
MDF will be somewhat more expensive, but its characteristics are higher than that of the previous species. The surface decor the same as the chipboard.

Another minus chipboard is the release of harmful chemicals that are used in the production of this material. To prevent the evaporation of formaldehyde, PVC and melamine film are used. The first type is considered more reliable. It has resistance to mechanical exposure and is not afraid of moisture. The recommended layer thickness is 1 mm.

The second type is used only at hidden ends.

The thickness of the side walls affects the strength of the product. The production uses chipboard 16, 18 and 25 mm. Best of all with your tasks copes the last look. The quality material consists of 2 outer layers of increased density, providing resistance to mechanical effects. The inner layer is more loose. It allows you to securely hold fittings.

The rear wall not only protects the inner space from dust. It gives the design additional rigidity, contributes to the stability of the housing. It is made of fiberboard, plywood or LDSP.

The first option is characterized cheap, but its operational properties is low. The material is afraid of moisture and does not withstand large loads. The panel is fixed with self-drawers, nails or furniture brackets.

Plywood refers to expensive materials. Over time, the leaf can be swallowed, which will lead to the formation of the gaps.

Fiberboard and Faneur can be fastened or tied. But it is worth choosing an angular cabinet, in which the rear wall is inserted into the grooves. They can be located with 2, 3 or 4 sides.

The most reliable way is to execute the "back" from the chipboard. Furniture acquires an attractive appearance in the end part. Plate is fixed with corners, Eurovints.

Features of the internal filling of angular cabinets

The internal filling of the angular cabinet includes the same elements as other types of furniture. Its feature is the presence of triangular shelves and uncomfortable for the use of plots. The task is to rationally use the entire volume.

Most difficulties cause diagonal and trapezoid models. Corner shelves are suitable for storing small things. And the space can be accommodated to place things of non-standard size (narrow and long) or equip this section with crochets for ties, belts, etc.

The space formed by the walls located at an angle of 90 ° is usually installed by a bar.

In the case where the cabinet has a M-shaped form, the central pole will be required for the attachment of the crossbar. If there is a partition in this zone, you will have to come to terms with inconvenience, and a plot located behind it is used to storing seasonal things.

Place the remaining elements will be easier. To organize storage according to the rules of ergonomics internally, the space is divided into 3 zones.

In the upper part, the mezzan or a long shelf is usually located, as well as a rod equipped with a pantograph.
The middle is designed for shelves (retractable and stationary), boxes, baskets. And also a trouser and a similar device of a smaller size. Here the crossbar can be installed, located in parallel or perpendicular to the rear panel. The latter option is complemented by a retractable mechanism, which facilitates access to all objects of the wardrobe.
The lower space fill the inclined racks for shoes, a small rod for a boot with high tops. And also there are travel bags, suitcases, household appliances (iron, vacuum cleaner).

Facades

The design of the corner cabinet must match the shared style solution. It is especially important to consider the embodiment of the facade for a small space so that the furniture does not look cumbersome. These characteristics are important:

way to open doors;
design of sash;
material for finishing.

Opening systems of facades of angular cabinets

The facades are equipped with swing, folding and sliding doors.

Swing type is considered a classic option. Successfully fits into any interior, and some styles (Provence, English) cannot be submitted with other species. The mechanism is characterized by simplicity. It consists of door canvases attached to the side walls with a loop. The number of flaps can change. Usually it is equal to the number of sections. The recommended door width is in the range from 30 to 65 cm. Lower value looks not aesthetically, but exceeding the permissible limit leads to the breakdown and the destruction of the canvas. Modern execution options are complemented by closers.

The swollen system provides a good overview and silent work, it is distinguished by the available price and a variety of models. However, it should be borne in mind that the normal movement of the flaps will require free space.

Doors made by the type of coupe, significantly save the area of \u200b\u200bthe room. Their appearance will satisfy the most refined taste. But the sliding mechanism has a high cost. The process of work is accompanied by noise, the review of the cabinet content decreases by 50%. The service life depends on the material of the guides. Aluminum rails will serve about 25 years, and steel may require replacement after 7 years.

The average position is occupied by folding doors. In this case, the sash consist of several parts interconnected. During the opening, they fold on the type of books or accordion. For functioning, you need less space. Nothing prevents access to the inner space. The minus is considered the instability of the folding facade, which is explained by the presence of one guide. Some models are equipped with lower rail, it allows you to increase rigidity.

Facade device and materials

The designs are distinguished by facades made of one canvase (solid), and consisting of 2 frames of framing and sealer (frame).

Whole facades are manufactured:

from the wood massif, but it greatly increases the cost of products;
DSP is covered with film or plastic, which allows to diversify the color and texture;
MDF is still veneered, cover enamel and varnish.

But the framework option has great popularity. It has a smaller weight, looks more attractive, allows combining different materials. The framework includes grooves in which the panel is inserted and fastened by the strokes. Furniture glue or nails are used for fixing them.

The framing is made of wood, MDF and aluminum. For inserts use:

laminated chipboard and MDF;
glass;
phaneur;
wood.

Decorative and protective coating materials of facades

In the design of the outer surface of the facades, different materials are used.

Mirrors will add light and expand the boundaries of the room. The surface is decorated with threads, matte or colored patterns.
Glass is transparent and matte. It is decorated with sandblasting, stained glass and fusing techniques, covered with color varnish.
Sticking the polymer film with photo printing will look stylish and effectively, it is only important to choose the correct image correctly.
Natural Materials: Veneer, Bamboo, Rattan is suitable for an interior in ethnic style.
Plastic bright colors will allow us to place the right accents. Please the simplicity of care, high operational properties and low price.

Functional purpose of angular cabinets - in what premises and for what are used

Corner structures can have a different purpose. They are appropriate in any room.

In the living room, this piece of furniture will help to best present a collection or art objects.
In the bedroom, the cabinet, with the appropriate internal filling, will perform the role of wardrobe.
The workbook will benefit from such an acquisition, as a large library can fit inside.
Such a product can unload kitchen space due to compactness and capacity.
A small triangular cabinet in the hallway will take a small plot, but will allow you to hide the upper clothes, shoes, umbrellas, etc.
A children's room is usually not distinguished by a large area, so angular furniture will help organize storage. In the closet there is a place not only for clothes, but also for toys, sports equipment, materials for classes with applied species of creativity, etc.

Photo of corner cabinets in the interior

Choose an angular wardrobe - it means to use the area of \u200b\u200bthe room as efficiently as possible, bring uniqueness to design, get a roomy storage. When buying or order, consider the material of the execution, the facade decor, the door opening system, internal filling, then the purchase will decorate any interior, and will not resemble the storage room.

If you have any questions or suggestions, you can contact us by email: [Email Protected]website
P.S. We do not sell furniture, we only help you familiarize yourself with what happens and navigate in the choice.

Even in a spacious house or apartment, it is necessary to think about the rational use of the area - every year the number of things increases everything. What to talk about small apartments. Here every centimeter on the account. One of the ways of optimal use of space is an angular cabinet compartment. This type of furniture allows you to take angles that are sharply used in general - it is difficult to install something there. Next, let's talk about what they happen and how to plan the right "filling".

Building, types, sizes

The corner wardrobe can be built-in and cabinet. In embedded as walls, gender and ceiling use the design of the room. The facade with sliding doors is attached to them. That is, this design is obtained stationary - the guides are attached to the walls, floor and ceiling. The advantage of this type of angular cabinets is economy, disadvantage - the impossibility of transfer. Another important point: walls, floor and ceiling must be even, otherwise the design will be overwhelmed, which will negatively affect the operation of the sliding doors.

Cabinet corner wardrobes are a full-fledged furniture with walls, floors and ceiling. They differ from the usual cabinet. They are presence of sliding doors and the fact that the height usually occupies all space to the ceiling. From the factory or shops are supplied in disassembled form, they are collected at the place, as they have such dimensions that they simply won't pass in the door.

Types of construction

In the form of angular cabinets, a compartment can be several types:

To be more understandable, the difference in the structure is better than all models in the graphic image (in the photo below).

If we talk about the convenience of use, the most optimal option is M-shaped. We can normally collect filling in a five-room and trapezoid closet compartment. The most uncomfortable, of course, triangular. In it on both sides they will have to have triangular shelves that do not differ in the capacity. At the same time, the middle will be empty, since the filling of the cabinet is located along the walls. The same can be said relative to a five-rank with the only difference that the triangular shelves are not here.

What material

Corner and any other cabinets are made from the same materials as traditional furniture - wood, and. The wood is almost not used, since it is too road and heavily, and its decorative data in this design is not profitable to file. Much more often use laminated chipboard. He is more democratic for the price, moreover, has a lot of coloring options. It may be imitation of wood, rattan, etc., and maybe a smooth or textured monophonic, matte or glossy surface. There are also films with drawings of different types - graphic and vegetable. All of them can be used to laminating chipboard.

Any structures can be made with elements of radial technology - with rounded corners. Such cabinets are made of MDF, the manufacturing technology of which allows you to make rounded shapes. MDF is also laminated and color options are no less.

As you can see in the photo, near the entrance and in the middle part of the corners are not sharp, but rounded. First, it looks beautiful, secondly, it is more safe - there are no sharp faces that can be born greatly.

Dimensions

The easiest way to usually decide on a height is under the very ceiling or a couple of centimeters below. All other parameters depend on the room in which you plan to install the corner wardrobe and available in the presence of space. Probably, it can be said about the minimum sizes:

In a small room, the most optimal choice is a M-shaped design. It is the least massive, leaves a free greater area. To visually, it was possible to estimate this, draw all suitable types of cabinets on the plan of the room. Then you can calculate the remaining free area.

A few words about the depth of cabinets. There are two standard options - 45 cm and 60 cm, the minimum depth is 40 cm. With a width of 60 cm and more under the clothes on the hangers in the cabinet, a conventional crossbar or pantograph is installed (so that you can use all the height before the ceiling). In smaller models, a special rod is needed, which allows you to place hangers parallel to the doors, since the shoulders have a standard width of 55 cm and simply do not fit.

Filling angular cabinets

As in any closet, the coupe in the corner has some set of shelves, drawers, baskets and seats for hangers. The feature of the angular cabinet in its form: there is some inconvenient places that, nevertheless, must be used. In some models of such uncomfortable places more (diagonal), in some less (M-shaped). In competent filling of these uncomfortable places and is the main task in the development of internal filling the corner cabinet.

How to fill the angles

The complexity represents the use of narrow triangles in diagonal and trapezoidal models. Here they usually have the shelves. This is the optimal option, because there are always things of small size that can be stored on these shelves.

No matter how much you are looking for options for filling such designs, the shelves are almost always installed there in standard layouts. There are creative options. For example, a separation for some long and narrow things - such as umbrellas, ski and ski sticks. Or - to fill hooks or jumpers for storing ties, belts and other similar little things. There are no other opportunities to use such a form space.

There is another complex zone, which should also be carefully thought out - a straight angle formed by the adjacent walls. Most often, there is a compartment for clothes on hangers (shoulder, trempels). The most problematic design in this plan is in the form of the letter G. If there is no partition between two parts, everything is solved simply - it is placed in the middle of the pole, crossbars are attached to him.

If there is a partition, you will have to come to terms with the fact that some part of the space will be uncomfortable. Usually, the unreasonable or rarely worn clothes is sent to this zone.

By filling out complex places, the remaining space can be planned with more ease. It is only necessary to determine the number of things of different types that you plan to put in the closet.

The rest is filling

Inside the cabinet, the coupe usually has three types of filling: shelves, crossbars for hangers and drawers / baskets. Since we have already partially places and crossbars, we need to think if you need drawers / baskets, and if so, how much and what volume they should be. If the furniture is planned for the bedroom, underwear is usually stored in the boxes, ties, socks, etc. can be laid. In this case, the boxes can be from three and more.

If we are talking about a hallway or corridor, then in the boxes you can store only gloves and some household trifle. There are enough single-two boxes, but you can do without them.

Boxes are not at the very bottom - so that them will use to bend or squat. They are put at the level of the hips or belt. The shelves or one more compartment for hangers are below. It all depends on the number of clothes of different species that you have.

In the corner wardrobes for the hallway, the lower part is discharged for storing shoes. In the simplest version, this shelves are height from 30 cm under shoes and sandals, and slightly more under boots and shoes.

Select facade

The appearance of the corner cabinet coupe depends on how the doors are decorated. They make attention to themselves. Make them out:

MDF and chipboard. Durable and relatively inexpensive materials. There are so many colors, textures: imitation of wood of various breeds and colors, colored smooth-colored surfaces with glitter (glossy) or without (matte), drawings and ornaments of different style and type.
Glasses (usually matte, patterned, color). Glass is used thick, calene. Some firms offer the drawing of some kind of drawing on the glass. Usually there is a specific directory from which you can choose the image you like.
Mirrors with possible drawings and ornaments by sandblasting. Mirrors also use thick. They can still have different shades - gray, blue, yellowish, etc. shade. Drawings on the mirror also usually make catalog, but some firms can embody your idea.
Mirrors are almost a classic genre
Photo printing is one of the possible coatings for doors from the chipboard, but thanks to unique appearance, it is usually taken into a separate category. The film is transferred to the drawing or photo. The print quality is very high, the image is very realistic.
Combinations of the materials and technologies described above. The most decorative effect is obtained if you combine multiple materials. The number of combinations is very large and you can pick up the facade for the corner cabinet of the coupe under any interior and taste.
Radial corner cabinets coupe. Thus are called those models in which the walls or facades are not even, but curved. Such models look more modern, smooth lines

Behind all this variety must be remembered about the effect of color to the perception of furniture. Since the corner wardrobe usually occupies a rather solid area, it largely determines the "sound" of the entire interior. Therefore, it is necessary to remember several truths. They are not so much. The first - mirrors push the boundaries, expanding the space. Approximately "works" and bright peeled or glossy furniture, facades with light glass. Second - dark furniture makes a small room even less. If at least it is to take into account, there will be less questions.

Photo of the idea of \u200b\u200bdesign and internal planning

Each corner wardrobe compartment is individual development. Thus, this type of furniture is good, which allows you to adjust the features of the life and taste of each. But sometimes the idea is required for inspiration, and it is easiest to find it in the photo of finished furniture.

Corner wardrobe in the bedroom - a great way to hide everything too much

This is not a completely angular wardrobe. More like a small

Did you like the article? Share it

Print article