Dried LDSP - Production of details in the size of the customer. Cutting and cutting chipboard and chipboard crook and lamination chipboard

When ordering cut from 10 sheets, we give a discount from 3% on the material

Cut and cutting chipboard and chipboard

Choppers are ordinary and laminated - widely used in the construction and finishing of the interior, in the manufacture of furniture and other products. Details and blanks from chipboard and LDSP are in demand not only in serial production, quite often they are used for independent manufacture Furniture and interior elements. It saves finance and allows you to make products to your taste.

Before entering the manufacture of furniture, it is required to cut the material. With a small amount of work, it does not take much time and effort and can be performed at home. But to cut a large number of Plates will have a lot to work. In addition, self-sawing chipboard can spoil the material - a violation of the technology of cutting chipboard and the use of non-professional tools leads to the appearance of chips, cracks and laminated coverage.

The best option is to order a cutting of LDSP in a specialized company equipped with professional equipment. In this case, you will receive the details of the exactly defined shapes and sizes with clear and smooth edges.

Cutting chipboard in the company All-Fanera

All-Fanera is ready to perform work on the SPE saw, using its own plates or customer materials. The complex of our services includes:

  • in the size of the customer;
  • hole additives;
  • applying the edge of PVC;
  • production of blanks with an inner and outer bend with a radius of up to 60 centimeters;
  • performing beveled parts;
  • cutting and cutting plates at an angle of thickness from 0 to 45 °.

Through the use of modern machines, we can manufacture:

  • billets for cabinet furniture;
  • details for kitchen interior;
  • billets for other object items.

Our equipment allows you to perform products with flawlessly smooth and clear edges. In work, we use only high-quality and sharp saws, so that the edge of the finished products does not appear, and there are no loans on the laminated layer.

When processing slaughter materials, it is important to comply with the exact dimensions of the parts specified by the Customer. For this, sheets are lying on pre-prepared computer templates. This approach allows:

  • correct details on the sheet of LDSP;
  • get blanks with the most accurate dimensions and angles;
  • minimize material waste;
  • reduce work.

All-Fanera benefits

All-Fanera has been operating in Moscow in Moscow since 1994. During this time, our specialists have gained extensive experience in conducting files, which makes it possible to cope with the highest complexity orders. Our customers get:

  • profitable
  • working using computer maps and secondary control of the technical task;
  • high-quality processing of materials - ready-made parts have a smooth non-swivel edge without chipping and scaling;
  • packing of finished products (optional);
  • operational shipment of parts and blanks.

How to order a cutting LDSP in Moscow in the company All-Fanera

To make an order, you need to fill out the blank, specifying the thickness and color of the material. To clarify the information, call +7 (495) 626-95-51, +7 (495) 626-99-95, +7 (903) 589-02-89 or contact the office of orders, located at: Moscow, Leningrad highway, 63 (m. River station or m. Belomorskaya).

Here, gathered a sufficient amount of material and decided to roll another analytical note. This time the topic is heating LDSP without chip.

It makes a fairly fair opinion that it is possible to clean the chipboard only on professional equipment (that is, a format-cutting machine).

The whole highlight of this machine is that it has two saw blades located strictly on one axis. The first britches the LDSP, the second cuts through it.

The cost of this unit is about 700,000 - 1,000,000 rubles (of course, there is more expensive))). For an amateur is not very acceptable.

A good way to cut the wrong parts marked, but in this way you do not drink. Square, of course, are present, but in an amount, quite correlating with the formatus (it also, in secret, leaves a small number of small chips). Many marks with marking. Only straight cuts can be made.

Method 5 - Milling

Provides the maximum clean edge of the workpiece, the quality is not different from the formathell, often even better.

With it, first saw the workpiece of the jigsaw, retreating from the milling line 2-3 mm, and then align the line on the template (I usually use a second piece of LDSP, dried on formathell, suitable size). Must be copying, that is, with the bearing.
Very clean cut. The ability to conduct curvilinear cuts, that is, the manufacturer of the set, including, and several are completely the same. Cons - a lot of troubles: the need for accurate markup, pre-feeding of blanks, setting the template or tire under the milling mill, that is, it is not very suitable for mass use.

An important procedure is broken LDSP, during which work is carried out with two materials - chipboard and laminated coating. You should choose tools that are suitable for them and will not leave any chips and cracks. The procedure is quite laborious, being much easier with other materials - chipboard, MDF and other. That is why at home to perform it undesirable - unforeseen costs for the purchase of new materials can be followed.

Prices for breakdown LDSP

Milling

150 rub. / PM.

The rounding of one corner to 90 degrees. Radius from 50 to 300mm (external)

150 r. / PC.

The rounding of one corner to 90 degrees. Radius from 300 to 600mm (external)

300 r. / PC.

The rounding of one corner to 90 degrees. Radius from 50 to 300 mm (internal)

300 r. / PC.

The rounding of one corner to 90 degrees. Radius from 300 to 600 mm (internal)

400 r. / PC.

PVC 0,4 mm material thickness 16mm / 18mm / more than 18 mm per p / m

45/50 / 55r.

PVC 2 mm Materinal thickness 16 mm / 18mm / more than 18 mm per p / m

60/65 / 70r.

20 r. / PC.

PVC 0.4mm per chipboard 16 mm thick / more 16 mm per P.M.

55/65 p.

PVC 2mm per chipboard 16 mm thick / more than 16 mm per P.M.

75/100 r.

Application of the edge manually

100r. / P.M.

Straight groove width 4 mm / 8 mm per P.M.

Quarter sample 4/8 / 12mm, etc. (40 rubles per pass) per P.M.

40/80 / 120r.

Diameter up to 10 mm (Polkterigners, Eccentric rod, confirmation, wanking)

10 r. / PC.

Diameter from 16 mm to 36 mm (under the loop)

35 r. / PC.

Packaging of parts in cardboard

50 r. / M2

Packaging of parts in a stretch film

Assembling the door wardrobe from chipboard

1000 rub.

Build the door of a wardrobe with a mirror

1200 rub.

Build the door wardrobe from chipboard and mirrors

1500 rub.

Gluing / twisting two parts

300 rubles / m2

Calculation of products with detail, additive, accessories

800 rubles / pm

Direct cut

150 r. / P.M.

Eurobuck

2000 r. / P.M.

SCOS (edge \u200b\u200blining included in the price)

1000 r. / P.M.

Cromaging

500 r. / P.M.

Straight cutting details

Chipboard; MDF; LDSP; LMDF to 16 mm

35 r. / P.M.

Chipboard; MDF; LDSP; LMDF from 18 mm

40 r. / P.M.

Plywood up to 17 mm

50 r. / P.M.

Plywood Over 17 mm

60 r. / Pm.

DVP, HDF 2.75x1.22

130r. / Sheet

DVP, HDF more than 2.75x1.22

200 r. / Sheet
Production of complex parts
70 r. / PC.
Ski at an angle to the side or not perpendicular planes Sheet 70 r. / PC.

Drank straight sides with access to different sides

200r.

Drank straight sided with one way

300r.
Curvilinear details (radius)
Administration of rectilinear parts edge (excluding edge)
The shaping of curvilinear parts (excluding edge)
Selection of groove
40 / 80r.
Drilling holes (additive)

Diameter from 10 mm to 16 mm (hole for eccentric)

30 r. / PC.
Packaging
30 r. / M2
Other services
Countertops
Complex cut - the cost is calculated in accordance with the task and template

We offer your attention a blank application form (37,00KB)

Dried LDSP in the size of the customer Wholesale and retail

Work at home consists of two stages: first the laminate is cut, and then all the material. We have due to availability special equipment They are performed in one stage, which significantly saves time and strength.

You can order our services on the site or by phone. We will spend the breakdown of LDSP promptly by providing you with neatly processed materials that will be used in the production of durable and beautiful on the type of furniture.

If necessary, we will quickly respond to all your questions about the services and all aspects of their provision. Contact details are presented to your attention on the site.

The advantages of the crucified laminated chipboard in the company KSPROF

Moscow has many specialized companies that provide services for the processing of materials used in the production of furniture. One of these is the company "KSPROF", in which you can order a breakdown of LDSP. In this case, we have significant advantages, including:

  • significant experience;
  • adequate pricing policy;
  • performing work with high quality results;
  • experienced, responsible and neat specialists;
  • operational conduct of processes;
  • accounting for all features and aspects of services;
  • convenient payment methods.

Work examples

We produce broken LDSP on the details in the size of the customer. In stock Large selection of laminated chipboard decors Egger and Kronospan.

Attention!
The company EGGER announced the conclusion of a large part of the decors of LDSP in 2020! Order any decors now, do not postpone tomorrow!

The price of the details of the Egger LDSP with the sizes

LDSP EGGER 8 mm from 740 rubles. / sq. M.
LDSP EGGER 10 mm from 740 rubles. / sq. M.
LDSP EGGER 16 mm from 740 rubles. / sq. M.
LDSP EGGER 25 mm from 1050 rubles. / sq. M.
Colors and prices LDSP Egger

Details price Kronospan LDSP with sizes

Radius

Nesting is not only a radius cut curvilinear parts on a CNC milling machine, but also the manufacture of parts from LDSP and MDF with the assembly holes at a time, i.e. Without moving from the machine to the machine.

The main advantages of manufacturing curvilinear parts and parts with an additive to non-technology:

  1. The ability to save sheets of LDSP due to a more dense location on a sheet of chipboard of curvilinear details
  2. High performance - cut speed up to 20 meters per minute.
  3. A fundamentally higher making accuracy compared to traditional technologies.
  4. The possibility of making inner cuts with high quality.
  5. Pure cut both on the front and on the back of the part, which improves the quality of the edge.
  6. The ability to work with vector files created in the Basis program furniture, Corel Draw and their analogues.

The above advantages make it possible to save both on the material and at the cost of work on curvilinear cut and additive, which is fully tangible on large orders.

Cost of services on the opening of the CNC milling mill for LDSP and MDF thickness of 8-19 mm is 30 rubles per 1 mp.

Radiusproof details from LDSP

Treatment of edge chipboard

Application on the details of the LDSP edges of PVC 0.45 mm

Application on the details of the LDSP edges of PVC 2 mm

Organit (fiberboard)

Drinking organic and holes under Fiberboard

MDF

Cut MDF Kronostar in size

Furniture additive

Drill holes in chipboard under the accessories

Hole under furniture loop, Ø35 mm 55 rub. / PC.
Hole under the holders of the shelves, Ø5 mm 25 rubles. / PC.
Hole through the confirmation, Ø8 mm 25 rubles. / PC.
Hole end for confirmation, Ø5 mm 25 rubles. / PC.


You can get the details faster and paying urgent cut.

Chipboard Kit reserves the right to refuse the provision of services without explaining the reasons.

Payment for services

Paying Cutting Services:

  • in cash in the office or production (see Contacts);
  • non-cash path on the basis of the account:
    • via the Internet bank or mobile application;
    • in any branch of Sberbank of Russia or another bank;
  • through the terminals of the Moscow Credit Bank.

We carry out:

  • Dried Ledp.
  • Cut MDF.
  • Cut plywood
  • Cut panels DVP
  • Crucified HDF.
  • Cutting plastic panels
  • Cutpone panels
  • Cut plastic
  • Cutting plexiglas
  • Silk facade panels
  • Cooked Tabletops
  • Pastforming panels
  • Making multi-piece parts from chipboard and MDF.

    All of the above materials are guaranteed to be cut without chipping and disruptions. When picking, the Holzma automatic backdrop (Germany) and FEEDER CAPA 450 format-cutting machine (Austria) are used. When ordering, a cutting card is compiled for the best distribution of parts on the sheet, in order to obtain a minimum percentage of lows. To accelerate the cutting process, there is a batch cut. We produce cut parts from both your material and from the customer's material. Always available in stock 12 colors LDSP High Quality: White Vanilla Gray Metallic Black Wenge Nut Eco Olha Planck Cherry Portofino Cherry Beech Oak Chojled individual orders We make multiple parts, panels with grooves.

    • Deadline for the production of 5-7 business days.
    • Urgent order is manufactured in 3-4 business days.

    * We carry out free storage of the manufactured order of no more than 3 calendar days. With untimely export of the order, the storage is paid separately at the rate of 1 pallet - 100 rubles per day.
    ** Finished orders are stored for Europod. When loading an order together with the Europdon, the customer gives the collateral value of the pallet at the rate of 250 rubles.
    *** Order packaging is paid separately, according to the rates given in the table. Loading the order in the car body of the customer is made using the loader.


    Cutting LDSP in Moscow - This is one of the main directions of our company. In addition, in the company "Solvopodolsk" you can order the crucible MDF, plywood, DVP panels, HDF, plastic, plexiglas, countertops, post-forming panels.

    Advantages of the ordering of the collapsed LDSP in the company "DollPodolsk"

    High-quality collapse Ledsp. We use the German Breeding Center Holzma and the Austrian FEEDER CAPA 450 Standard Machine. High-class equipment that has long proven itself in the market allows us to ensure that the cut will be carried out without chipping and cracks, with the highest possible accuracy (0.3 mm). The loading of the panels is automatically produced, which eliminates the human factor and, therefore, reduces the probability of marriage to zero;

    Sale of LDSP with a saw in Moscow. We offer customer cutting materials and their own. We always have 12 colors of LDSP from the company "Swiss Krono". We work with this manufacturer, because the experience was convinced that it was he who offers best Material. For the manufacture of LDSP, it uses only the best raw material, which is absolutely safe for humans. When picking up LDSP from "Swiss Krono" does not arise any difficulties, the edges are obtained smooth and neat;

    Cutting LDSP on complex forms. FEEDER CAPA 450 Breeding Machine makes it possible to cut out of LDSP not only standard square and rectangular shapes, but also a triangle, hexagon, trapezium, etc.;

    Urgent cutting ledpers. Machines allow you to carry out a batch cut, which significantly speeds up work. If you need urgent cutting LDSP in Moscow, contact us! The standard time for the order is 5-7 business days, and urgent - 3-4 days;

    Rational consumption of material. The cutting map is compiled, where the placement of parts on the sheet is optimized, due to this, the amount of waste is reduced to a minimum, or they are not left at all;

    Dried LDSP at a low priceSupporting your expenditures on the preparation of material for further processing. Savings on this service allows furniture manufacturers to reduce their costs and increase profits.

    Dried LDSP in the size of the customer (Moscow and Moscow region)

    Writing LDSP is an important stage in the production of furniture. This process cannot be called simple, for its use, you must need high-quality equipment, manual cutting will lead to cracks and chipping.

    Looking for where to make a discovery of LDSP on its own sizes? Contact our company "Crailpodolsk".

    Also in our company you can buy LDSP with a saw in Moscow. Already ready-made high-quality elements are perfect for the manufacture of furniture. With smooth items without chipping, the furniture will be obtained better and with high aesthetic properties.

    We have our own production and engage in wholesale sales, so our important advantage is the price. Crucified LDSP is cheap, but at the same time it is high quality - this is what we offer our customers. If you are looking for a company that will make a breakdown of LDSP in the size of the customer (Moscow) or sell high-quality already ready-made elements from LDSP, then contact "Crailpodolsk"!

Did you like the article? Share it
Top