Cladding panels for the facade of the house with natural stone. Facade panels for stone: price and photo

We will send the material to you by e-mail

In the systems of ventilation facades, facade panels are used for exterior decoration home from different materials with an unequal format and methods of fastening individual elements to each other. They are hung on frames from a bar or galvanized profile, imitate natural wood, natural stone or facing brick.

Exterior facade panels

Overview of species, characteristics, brands

Facade panels for exterior decoration of the house are classified according to several criteria:

If it is necessary to simultaneously insulate + decorate the facade, the subsystem (profile or bar) is attached to the wall with brackets after insulating its outer surface. This is necessary to eliminate cold bridges.

Helpful information! Laying basalt wool or extruded polystyrene foam inside the crate cells is a violation of technology. If only the improvement of the exterior of the building is required, the battens can be fixed directly to the building envelope without brackets.

Metallic

There are facade panels made of aluminum, stainless steel, galvanized steel. Unlike budget linear panels used for finishing industrial buildings, sports complexes, siding, cassettes have a more noble look, lamination, 3D texture.

Even with double-sided coating with polymeric materials, steel panels are subject to deformation, accumulate static electricity require thermal insulation. Aluminum is devoid of the last two drawbacks, but it costs much more.

Polymer

Of all the existing polymers, PVC (vinyl) is commonly used for exterior cladding. There are two types of vinyl facade panels for exterior home decoration:

basement siding - rectangular modules measuring about 120 x 50 cm, imitating stone / brick;

Manufacturers provide a wide range of additional elements that allow you to qualitatively decorate abutment nodes, cornices, ebbs, slopes of openings of cottages.

Composite

The range of composite panels used for facade decoration is much wider:

fiber cement - the filler is cellulose (up to 90%), which allows decorative embossing on the front surface;

porcelain stoneware - slab sizes 1 x 1 m - 1.2 x 3.6 m, the material can be cut with a glass cutter, it is environmentally friendly, inert to solar ultraviolet light, household chemicals;

aluminum composite - price square meter from 1000 rubles, fastened with rivets, may have a wave or a flat surface of the front side;

clinker - has a layer of insulation, has a maximum operational resource, but unnecessarily loads the supporting structures.

Composite material is always more expensive, however, it has a high resource, original design.

Glass Panels

The original translucent panels are laminated, reinforced or hardened, obtaining high vandal resistance or diaper penetration. This material has light / visual effects (opacity, dullness), usually used for finishing the lower floor of a half-timbered house.

Helpful information! Glass panels should not be confused with facade glazing systems. Finished enclosing structures are sheathed with these materials. By independent walls they are not.

Sandwich

In private construction, prefabricated and monolithic sandwiches are rarely used. This material is structural, since when the polyurethane / expanded polystyrene foam is pressed between two profiled sheets of the board, sufficient rigidity is obtained.

Sports complexes, hangars, warehouses are being built from them. Prefabricated sandwich buildings can be dismantled for transport to a new location.

Related article:

Features of installation, advantages and disadvantages

Facade fiber cement panels for exterior decoration of the house, the photo of which is presented above, are attached to the subsystem lathing with clamps, like most other claddings with a thickness of 16 - 25 mm.

For thin-walled decors, a riveter is used (only on a steel profile) or self-tapping screws, nails on bar battens.

Helpful information! Rigid fixation is allowed only for materials with low linear expansion. In other cases, it is necessary to ensure one degree of freedom with horizontal movements.

Thermal panels have a layer of insulation, which must be placed in the immediate vicinity of the wall. Therefore, they must be glued to the enclosing structures without an air gap. In sandwiches, the heat insulator is located between metal sheets, therefore, they are applied to the quality of the wall material.

A budget option for the design of the exterior of the cottage are plastic facade panels for the exterior of the house with an outer layer that imitates natural material.

To increase the resource of the ventilation facade, composite materials and metals are used.

If you want to make your Vacation home more attractive in appearance, add rigor to its design, then for this there are facade panels for a stone. Natural stone has long been used as a decorative element. And now materials are often used that are able to repeat the texture of natural stone. What type of panels is the best to use for cladding, and how to attach them to the facade?

Unnatural stone

The stone surface has a rather unusual texture, which is often used for decoration. different buildings... Various types of stones are practically not used in private construction, since it is expensive and impractical. As a replacement, panels with a stone texture are used, which can be quite accurately repeated under a wild stone, brickwork, marble and granite.

The imitation is so accurate that it is almost impossible to visually distinguish the copy from the breed.

A similar effect was achieved thanks to special machines that can make rather beautiful embossed tiles from polymers. Facade panels have a number of undeniable advantages:

They are affordable, especially in comparison with natural stone, which is much more expensive.
Outwardly, they cannot be distinguished from real rock.
You can cover the panels on the facade of the building yourself.
The products themselves are quite durable and practical in everyday use. They can be easily washed from dirt, and damaged parts can be replaced with new ones.
In addition, a layer of insulation can be placed under the panels. And there are also panels in which a heat insulator is already installed.
By the way, all slabs are divided into single-layer decorative and multi-layer. The former are lightweight stone panels for cladding, but a thin layer of waterproofing film or insulation can be placed under them. Multi-layer panels are slightly heavier, but have an additional layer of polyurethane insulation, so you don't need to think about thermal insulation.

But the variety of plates can amaze any user.

Varieties of products for facades

Now guess what materials can be used to make facade panels for exterior decoration of the house? At the moment, the market can offer as many as 5 different options:

Polyvinyl chloride boards. Yes, ordinary plastic, decorated with a stone. Lightweight plastic products are an excellent choice for all weather conditions. PVC panels repeat any texture of stone; there are many different colors to choose from.
Combined multilayer PVC panels differ in that they have an additional layer of insulation. If your home is located in a cold area, then this is the option that suits you best. Ideally repeats brick and decorative stone, tiles.
Fiber cement panels are already losing ground. Usually this is the closest analogue of stone panels, but in terms of their price and mechanical properties they are inferior to plastic products, therefore they are not very popular.
Decorative clinker and ceramic tile stylized as a stone. These are heavy products that are best suited for decorating the facade of the basement part. Due to their severity, they have certain installation problems.
Last but not least on the list are hardware and siding that mimics rough masonry and conventional brickwork. Looks very solid from a distance.

Why is it advisable to use facade slabs to decorate your home?

The facade panel is ideal for exterior decoration of houses. And that's why:

All kinds decorative cladding incredibly durable and can withstand severe mechanical stress. True, some will still be damaged, for example, the metal will bend, and chips will form on fiber cement products. In addition, each type of cladding should be used in special conditions, and the only universal view the panels are PVC products.
Huge selection of panels. If you want to decorate the facade of your house under a stone, then better option than the panel you will not find. For facade cladding, PVC, siding and decorative ceramics are perfect, and for a plinth, fiber cement and metal panels will be the best choice.
The panels are reusable, that is, if necessary, they can be dismantled and then hung up again, but on a different facade.
Most of the products are not subject to the negative effects of moisture, ultraviolet radiation, cold, and heat.
There is no debris from the material.
There are many modifications for the decoration of the facade of houses, for example, ventilated or insulated structures.
Preparation of walls for installation is practically not required.

Lightweight panels are quite cheap. For example, the dimensions of a standard product are 1x0.5 m; if this PVC material, then the cost of 1 element will be about 100 rubles. 1 sq.m. decor imitating stone, Russian-made will cost 350 rubles. German variants more expensive: from 700 to 1500 rubles per 1 sq. m. The same prices for Japanese panels. So when choosing a finishing material, everything will come down to considering PVC under a stone.

How to install?

Wall panels are firmly connected to each other thanks to locks. Joining, 2 elements are firmly connected into a single structure. An instruction is always included with the panels, in which it is written in detail how to connect them correctly, as well as where it is better to start the installation. In any case, you will need the following tools:

building level and tape measure;
in the case of PVC, a hacksaw is useful;
you will also need a drill;
it is advisable to take a screwdriver so as not to tighten the fasteners manually.

The sequence of work is as follows (consider a ventilated design option):

Before installing decorative elements, prime the walls to prevent the spread of fungus. If there are irregularities, then it is better to eliminate them, otherwise the panels will deform over time, which will ruin the appearance of the building.
We mount the crate from metal profiles. For this, clamps are attached to the edges of the wall, which are screwed with self-tapping screws. All profiles must be mounted strictly vertically, without distortions. The step between the retainer is 1 m, and the profiles are mounted every 50 cm.
After the lathing is installed, you can begin to decorate the facade with panels.
The installation of elements begins from any corner. 2 are attached to 1 panel; you can immediately make a corner and install decorative corners and planks, then finish 1 row. If the distance between the corners is more than 3.5 m, then a special H-shaped metal profile is mounted, with which the panels are connected. This will make the installation much easier.
When the siding is facing you, you will not see any fasteners as they are on the side. Side panel products are fastened with self-tapping screws into the wall. Siding with a ventilation system is attached in a slightly different way, therefore, in this case, a different installation technology is required.
Facing panels under a stone from different manufacturers may have different locks and types of connection, so read the instructions before installing them.
The decoration of the facade of the house with stone panels is carried out sequentially, row by row, until the entire wall is closed.

Installation nuances

Pay attention to the following nuances:

When working with siding, you can encounter a number of unpleasant phenomena. If a ventilated system is installed, then a very unpleasant sound, reminiscent of a whistle, will occur during gusts of wind. Wind currents will pass through the slits in the panels. It is impossible to get rid of this, so it is better not to install such systems in windy areas.
If the cladding is not multi-layer, then it is recommended to lay a layer of any rolled heat insulator under it.
With scissors, you can trim products, give them the desired geometry. In the corners and in the upper part of the wall, you will have to use trimmed panels, so it is worth purchasing a few more squares than is required, according to the calculations.

Conclusion on the topic

With the help of decorative panels, you can transform both wooden and brick buildings. If you are tired of the nondescript dull look of your house, then purchase a siding kit and install it on the facade of the building. The rocky relief and texture of the rock will change the visual perception of even a small house beyond recognition.

You just need to carefully approach the choice of color.

For example, if you choose too dark siding and mount it on a small building, then it will visually become even smaller and darker.

Nowadays, artificial Decoration Materials imitating natural ones - wood, stone, brick. In one of the first places in the list of these materials are plastic panels for facade cladding.
They meet the highest requirements for exterior decoration, and allow you to quickly and cheaply give any building a great look.

Plastic products include, first of all, products made of polyvinyl chloride - wall and basement siding. It is the latter that will be discussed in this article.
But I would like to clarify right away that the name "basement" is not entirely correct. Indeed, these panels are often used for cladding the above-ground part of foundations, since their thickness and strength are much higher than that of conventional wall siding.

But their purpose is not limited to this: such panels with a decorative surface imitating stone, brick, marble or wood are an ideal material for facades.

Advantages of the material

Plastic cladding panels for the facade of different manufacturers may differ in size and decor, but they all have the same advantages:

Moisture resistance, thanks to which they reliably protect load-bearing walls and insulation from the effects of atmospheric precipitation;
Absolute resistance to corrosion and decay. PVC does not support the reproduction of mold, fungus, is not subject to damage from insect pests;
Facade plastic panels do not fade in the sun, since the dye, resistant to UV radiation, is injected directly into the raw material, and is not applied to the surface;
Low price in comparison with those materials, the surface of which they imitate;
Easier and faster installation, especially when compared with facing houses with bricks, natural stone or clinker tiles;

Siding for a plinth under a stone is a modern finishing material, which is one of the most popular today. It allows not only to insulate the building, but also to transform its appearance. This provides reliable protection buildings from negative impact external environment.

Facing siding under a stone has a natural texture and externally practically does not differ from natural material... And even surpasses it in some properties.

Among the many advantages that distinguish the basement siding under the stone, the following can be distinguished:

The finishing material has a relatively low weight, which greatly facilitates the process of its installation. Wild stone siding can be used for any type of foundation. This property becomes especially relevant when it comes to the reconstruction of old buildings.

Wild stone plinth siding is an environmentally friendly finish. In the process of its production, safe materials and special additives are used to improve the quality characteristics of the product.

The material does not change its properties under conditions of sharp temperature fluctuations.

Plinth siding under a stone reliably protects the walls from moisture and prevents the formation of condensation. This prevents mold or mildew from appearing on the surface of the material.

Such a coating does not require additional finishing and retains its excellent appearance throughout its entire service life.

The material has an improved system of locking joints, which provide the panels with additional wear resistance.

Stone siding does not require special maintenance. You can remove dirt with plain water and detergents at hand.

The catalog of the 101Siding online store contains more than 20 collections of basement siding under a stone from the best manufacturers of facade panels; photos of the exterior decoration of houses and a description of the materials can be found in the corresponding section. Our experts will help you navigate the assortment.

You only need a few minutes of free time to place an order. Select the appropriate type of siding and place it in the "Trash". We will deliver your order as quickly as possible.

Currently, siding for a stone basement is presented in many different collections of various shades and textures. This material can be of two types:

Metal siding. It is characterized by increased strength and wear resistance. One of the main advantages of metal siding is its high fire safety. That is why the material is widely used in the decoration of public and administrative institutions.

Vinyl siding for a stone. This material is made from polyvinyl chloride. Facade plastic panels under the stone do not crack, do not dry out and are not subject to decay processes. The material perfectly withstands the effects of wind, snow, rain and other negative external factors. Plastic siding for a stone does not require any special maintenance. The service life of the product is at least twenty years. At the same time, wall siding under a stone has a fairly affordable cost.

Modern materials can imitate:

smooth stone;

antique hand-molded stone;
aged stone;
antique stone;
cobblestone and boulder masonry;
"Torn" stone;
rubble stone;
marble, granite, limestone and other rocks.

Photos of facade finishing options different kinds plinth siding under the stone are presented on the Internet.

As noted above, stone-like facade panels have a relatively low weight and a well-thought-out fastening system. Thanks to this, their installation can be done independently, without resorting to the services of specialized teams.

Installation of facing facade panels for stone is carried out in several stages:

First, you need to equip the crate. It can be made from metal profile and wooden blocks. When arranging the lathing, it must be borne in mind that the distance between the panels and the ground must be at least fifteen centimeters.
After installing the profile, the facade siding should be properly cut under the stone. Some structural elements can be cut in a special way. For example, steps.
The next step is to install the launch pad. Experts recommend starting from the left edge.
Then the subsequent rows are laid. Please note that cladding panels for wild stone are installed as close to each other as possible. In this case, no gaps should form. If the Wild Stone façade panels are mounted on a wooden lathing, nails can be used to install them. When it comes to steel elements, special self-tapping screws are suitable.

Important: The Wild Stone facade panels must be installed in such a way that thermal gaps remain. They must be present regardless of which crate the base material is being laid on. If thermal gaps are not provided, over time, facade panels for stone can deform and lose their presentable appearance (numerous photos of such examples can be found on the Internet).

Facade decoration is one of the most important activities. Not only the appearance, but also the operational characteristics of the building depends on it. One of the ways to quickly and efficiently cope with the task is to use facade panels for exterior decoration of the house. They are different, from different materials with different characteristics and a vernal view.

Types of facade panels

Facade panels for exterior decoration of the house are a solid group of materials with various technical characteristics made from different materials. To choose, one must at least roughly represent their appearance, features and properties.

For finishing the facades of private houses

Not all facade panels are used for cladding private houses. The point is not that "it is impossible", but that they do not fit, and, moreover, almost all of appearance... Another reason is the complexity of installation and high cost. Today you can find the following facade panels for the exterior of the house different types... We list all of them below.

Facade siding

A well-known finishing material in the form of long strips mounted on a frame. There are traditional options painted in one of the colors, there is an imitation of timber, logs, brickwork.

This is the most available material for finishing the facade of the house, but it is too thin, has a low resistance to mechanical damage. Another nuance - the sunny side fades, and not everyone likes the appearance.

Basement siding

Basement siding is also made of polymers - PVC (vinyl), polypropylene. It is produced in the form of rectangular panels, some with locks along the edges. Mostly imitate brickwork different colors and textures, wild or faceted stone.

Basement siding is made from polymers. The cheapest - made of polyvinyl chloride (PVC) and polypropylene

The mass from which the basement facade panels are formed is colored in mass, therefore scratches and other damages do not differ from the front surface. They differ from facade siding not only in shape and price (more expensive), but also in greater thickness (20-30 mm, versus 15 mm) and a more believable imitation of stone or brick.

Fiber cement facade panels for exterior home decoration

Fiber cement is an environmentally friendly material that is obtained from a mixture of fibers (small synthetic fibers) and cement. Planks or slabs are formed from the mass, after which they are painted. They were invented in Japan, therefore they are also called "Japanese facade slabs".

Fiber cement boards - a serious finishing material

Disadvantages - a large mass and color of the surface layer (a cement base is visible on deep chips). Advantage - the material does not burn and does not support combustion. If we talk about the price, then Japanese slabs are expensive, but there are analogues of Chinese and domestic production with more loyal prices. Chinese, A-Vent groups, by the way, are of good quality. The company has been on the market for a long time, reviews are mostly good.

WPC (wood-polymer composite)

The wood, ground to fibers, is mixed with a liquid polymer, and a dye is added. From the resulting mass, plates or boards (lining, planken) are formed. This material is used not only for finishing facades, it is used for flooring near the pool, in the gazebo, on the open veranda.

In appearance, and even in tactile sensations, the wood-polymer composite is very similar to wood. The difference is that these "boards" do not need to be painted or varnished. They retain their original appearance for a long time. The disadvantage is the considerable weight and high price. But they are durable, as they are colored in the mass, chips and damage (if any) are not visible.

Porcelain stoneware

The appearance of this material is known to everyone, since a thinner variety is used for flooring. Facade porcelain stoneware differs in greater thickness and dimensions.

Facade cladding with porcelain stoneware has serious disadvantages: high weight, complexity of cutting and installation, which entails a high cost installation works... And this is a plus to the fact that the material itself is far from cheap. The disadvantages can also be attributed to an overly pompous look, so the architecture must be appropriate. And so, the decoration of the house with ceramic granite facade slabs is beautiful, durable, resistant to the effects of climatic factors.

Clinker facade panels

This is a multi-layer material. A layer of insulation (expanded polystyrene) is glued to the OSB layer (there is not always), and a thin clinker tile is glued to it. There is an option only from expanded polystyrene and clinker. It is produced in the form of rectangular blocks with jagged edges.

Clinker facade panels - finishing and insulation in one "bottle"

The material is not cheap, but at the same time durable and attractive in appearance. In addition, thermal insulation characteristics are improved at the same time as finishing. This is the only material that goes along with the insulation, which is why it is also called facade thermal panels.

So which is better?

It is impossible to say unequivocally which of the listed materials is better. In appearance, many of them are similar, although there are exceptions. For example, porcelain stoneware or facade siding can hardly be confused with anything. But all the rest have a similar heyday. So in this matter you have to focus on your own preferences.

As for the operational properties, there are no obvious favorites either. All have features and disadvantages. So, according to these parameters, you have to select facade panels for the exterior of the house, depending on the properties of the material from which the house is built and the need for heat / wind / sound insulation.

For example, it is better to finish vapor-permeable walls without foam. It does not conduct moisture. Absolutely. In this regard, the use of clinker thermal panels is undesirable. No, you can add vapor barrier material from the inside. The vapor barrier will block the access of moisture to the inside of the wall, everything will be fine with finishing. But moisture will remain indoors. Removing it requires a powerful ventilation system, and installing it is expensive. And you need to design it even at the design stage of the house. So thermal panels can be used on houses made of wood or aerated concrete only if they are installed on the crate. No direct wall mounting.

If we talk about the cost. Of all the listed, the most cheap way finishes - facade siding. Next in price are basement siding, fiber cement boards and WPC. And the most expensive ones are porcelain stoneware and clinker facade panels.

For the design of industrial buildings and offices

In this section, we list the facade panels that are most often used to decorate offices, industrial, retail or warehouse buildings. This does not mean that they cannot be used for a private house or summer cottage. It's just that their appearance is not very suitable for "home" in the broadest sense. But houses with non-standard architecture - in the style of techno, minimalism and others of the kind - can be finished very well. They will look even more unusual.

Metal panels. Available in rectangular or square blocks of various sizes. They are made from steel or aluminum. Steel is cheaper, but corrosive. Aluminum does not corrode, but is expensive. This type of facade panels for private houses is also sharply used due to their "noise", which makes them the least attractive of the group.
Metal facade panels - for non-standard architecture houses
Translucent panels. This type of facade panels is used for finishing office high-rise buildings. They are made of transparent sheet plicarbonate or double-glazed windows - several glasses installed in one profile. In private housing construction, they can be used for the device winter garden, covered, glazing of a large terrace, balcony, loggia. They can be made of transparent material, dyed in the mass or with spraying (mostly mirror, on one side). You can, probably, decorate the whole house with translucent facade panels, but for this you need to involve an architect - material that is too demanding on aesthetics, and even with difficult technical conditions installation.
Translucent panels - for decorating winter gardens, covered verandas, gazebos
... Produced in large format blocks. These are two metal plates (the front one is very similar to corrugated board), between which a heat-insulating material is laid. Purpose - finishing of industrial and warehouse buildings. Not suitable for private houses for aesthetic reasons, although it can be used for summer cottages, if not too high demands to the exterior. You can build technical rooms from them -, gatehouses,.
Sandwich panels - for fast construction
Aluminum composite plates. One of the varieties of sandwich panels. Between the two flat sheets of aluminum, there is a layer of composite material. Again, not very often seen in the private sector. There are two reasons - the high price and the same "office" look, although it may be suitable for finishing the basement, since the aluminum-composite finish is not as "noisy" as just "metal".
Aluminum composite plates - two sheets of metal with a composite interlayer

As you can see, any of the materials in this group can also be used to decorate a private house. In this case, the view will be non-standard. If this is what you need, choose the one that suits you.

Mounting method

Facade panels for exterior decoration of the house are made of different materials, have different shapes, but their installation method is very similar. During the installation process, special elements for fastening can be used, but the device is the same - according to the principle of ventilated facades. In short, the installation looks like this: a lattice is assembled from profiles, and the front paneling panels are attached to it.

Front panels for exterior decoration of the house are attached to a special frame. It is exposed horizontally and vertically, after which the facade panels are screwed onto it for the exterior decoration of the house.

The frame is assembled from metal and plastic profiles, sometimes use wooden blocks... Wooden beams are an economy option, since in most parts of the country they are much cheaper than metal products. But it is suitable only for materials with low weight and not particularly demanding on the installation system.

On the bars, you can fix facade and basement siding, fiber cement slabs, WPC, clinker panels. Only before installation, the wood must be treated with antibacterial and flame retardant compounds. The bars can be replaced with galvanized drywall profiles. They also do their job well. But it must be remembered that most of the facade panels have their own system of profiles with special fastening elements. The standard mount provides, as a rule, a secret installation - without damaging the front surface. Replacing the profiles with a bar, you have to drill holes in the finishing for the installation of fasteners and this is not very good, as it breaks the tightness.

The system of ventilated facades is good in that at the same time as finishing it is possible to insulate the building, improve sound insulation (lay appropriate materials between the profiles). Another important advantage is that the problem of removing condensate is easily solved. Disadvantage: significant material costs for the fastening system itself (plus the cost of the front panels).

For example, let's look at how to decorate a facade with basement siding, fiber cement and clinker slabs. Why these materials? Because it’s about, and the materials presented are the closest competitors, gradually ousting it from the market.

Installation of basement siding

The installation of basement siding differs from the traditional lathing for linear finishing materials (siding, for example) in that the lathing must be "in a cage" - the profiles / bars must pass at the junction of the panels. Since the basement siding looks like a rectangle, the lathing should also look like. Another feature is the installation of the start and J-profile. They close the material cuts, give support, give a finished look. They are not so expensive, so it's not worth it to be smart trying to do without them.

And we must also remember that there are special corner panels for decorating the corners of the building. They are purchased separately, and often have a different color or even a different texture. So even a rectangular or square house looks more interesting.

The procedure for installing basement siding is as follows:

That's the whole installation of the basement siding. After the crate is assembled, the process goes quickly (if the sizes of the panels are the same and there are no problems with shades).

How to install fiber cement boards

Fiber cement facade panels for the exterior of the house can also be mounted on a batten of wooden bars, but they will have to be fastened through and through, having previously drilled a hole. The standard frame for the installation of fiber cement slabs consists of horizontal and vertical profiles. In this case, the plates can be installed on clamps - special plates for concealed installation.

Assembling the frame

The order of work is as follows:

When fastening with self-tapping screws, they are screwed in so that they fall into the profile. In this case, one must try to get into the technological groove (the seam between the "bricks"). In this case, the fastening is less noticeable.

Fastening fiber cement boards to the frame

Fastening with clamps - secret. In this case, the surface of the slab is not damaged. Clamps are attached to the profiles and hold the slabs with special tongues. The order of work is as follows:

The lower ebb is placed.
The starting bar is attached.
Angles are set.
The first row of slabs is placed in the starting plate, fixed on top with clamps. They are placed trying to get into the established profiles.
The next sheet rests on the tabs on the clamps. There is a special seal on the back of the fiber cement board, which guarantees the tightness of the connection.

This method of installation is invisible - the clamps are positioned so that they are behind the panel, and the protruding tongues are closed with the next fiber cement board.

According to this principle, most ventilated facades are installed, which include all or almost all facade panels for exterior decoration of the house. The shape of the profiles and cleats differs, the installation step, everything else is very, very similar.

Installation of clinker facade panels

As already mentioned, any front panels for exterior decoration of a house are mounted according to the same principle, therefore we will only talk about the differences that are characteristic of clinker thermoblocks.

Features of choice

Their main difference is that they come immediately with insulation - expanded polystyrene. When choosing them, it is necessary to choose not only the quality of the clinker (when hitting with a metal object, the sound should be sonorous). It is important to choose the right thickness of insulation. The dew point should be located in the thickness of the insulation. This is very important for normal operation (the walls will not get wet and freeze through, the house will be warm and dry).

Second important point: on even walls (height difference no more than 3 mm) they can be mounted without lathing, directly to the wall. In this case, you need to use long dowels or self-tapping screws (when installing on wooden walls). Otherwise, the frame is assembled from wooden beam, which compensate for all the irregularities.

What is the difference between installation

There are also significant installation differences:

Clinker facade panels for exterior decoration of the house after installation look exactly the same as a house built of clinker bricks. You will not find any differences either at first or at second glance. Is that the masonry is too perfect.

Did you like the article? Share it

Print article