How to make a real lizen at home. How to make lysuun at home - different ways of girlfriend

Today, Lizuuna can be bought at any toy store, however, to please yourself at all not necessarily spend money. In this article we will tell you about the most unusual methods Production of lysen at home.

Lizun is a favorite toy not only of all children, but also adults. It can be mine, stretched, tear and sculpt again.

How to make magnetic lysun?

Magnetic lysun is not just a toy from a jelly-like material, it is a toy that when interacting with a magnet takes the most bizarre and funny forms. It is such a slide that takes the greatest popularity in children.

Make lizen at home can be 2 different ways.

Method number 1.

  • Liquid starch
  • PVA glue
  • Magnetic chips
  • Magnet

We proceed to the manufacture of lysuine:

  • In one-way container, mix approximately 50-60 ml of liquid starch and 1.5 tbsp. l. magnetic shavings. Stir the ingredients. As for liquid starch, it can be bought in a ready-made form or do it yourself.
  • The easiest way to prepare such starch at home: connect 10 g of corn starch and 80 ml of waterstir. Next, boil 500 ml of water and a thin weaving to pour into it a previously cooked mass, stirring to cook a few mines., Add optionally essential oil (2 drops) and boil a few more minutes.
  • Next, the cooled starch is transferred to the can, bottle and use the need.
  • Now, in a mixture of starch and magnetic chips, add approximately ΒΌ cup of glue, stirred ingredients thoroughly.
  • Next, the most important stage - formation of lysen. Make it is not easy, since at first the toy sticks to his hands. To protect your hands and nails from black, use the rubber gloves, they can be completely lubricate them with glue or butter.
  • Mix the lysun until it takes the right form and will not become the desired consistency.
  • Next, you can proceed to the game with magnetic lysome. It can be used as an ordinary slider - to mine, inflate as a ball, but you can play with a magnet.

Method No. 2.

  • Any stationery glue
  • Iron powder
  • Bura in liquid

Start making toys:

  • Connect the glue half package from 1 tsp. Bras, carefully stir the ingredients.
  • Now send 2-3 tbsp. l. Water, stir up again.
  • Mix the mass until it becomes dense. Next form slim hands and only after interfere with iron powder in a toy, it needs to be taken about 1.5 hours l.
  • If during the game with the slider it will be badly magazine, add some of the iron powder to it.

Note that such a lysun is very much dirt surface, so they need to play extremely gently. When cooking toys, it is best to protect your hands with rubber gloves. Keep such a slide need in a plastic container.

How to make lysun from salt, glue, shampoo?

For such a recipe, Lizun turns out exactly the same as purchased. It stretches well, it might and even inflates like a ball. Even a small child will be able to make a toy for this recipe.

  • Shampoo - 5 tbsp. l.
  • The stationery glue transparent - 2 tbsp. l.
  • Salt - 2.5 tbsp. l.

Make lysun this way:

  • In the container pour glue.
  • Now we add to the shampoo adhesion. note that shampoo You can use completely any. Its smell, color, etc. do not matter. The only thing to take into account is that the color of the shampoo will determine the color of Lizun, unless, of course, you do not want to add some other dye to the ground.
  • Mass of glue and shampoo It is necessary to stir thoroughly. In the process of adding shampoo, the mass will begin to thick, it will become jelly.
  • From salt We make saline. To do this, combine salt and approximately 0.5 liters of ordinary water. We stir the liquid to completely dissolve the salt.
  • Now put jelly Mass In the saline and form a toy. Moving it, rinse with brine.
  • After 3-5 minutes. Such manipulations of Lizun will become elastic, soft and militant, and most importantly - stop glue and pester to the hands.


  • After that, the toy must be placed in plastic container And get out from there, only for the time of the game with her.
  • If you want to add any dye to lysun, do it at the glue and shampoo connection stage or add the dye immediately into the glue.

How to make lysun from silicate glue and spirits?

Yes, in fact, such a favorite toy can be made even from silicate glue and the most ordinary perfume. There are some kind of ingredients in the house for everyone, so trying to make the lysun unequivocally worth it.

  • Silicate glue - 3 tbsp. l.
  • Spray perfumes
  • Red dye

So, we will make lysun so:

  • Glue placed in deep container.
  • Since silicate glue is transparent, it can be painted with any dye and as a result of getting Bright and beautiful slim. You can use a completely any dye, of any color, we suggest try to make lysun red.
  • Cap 1 drop of dye into glue (if the dye is liquid), dissolve the dye in water and a few drops of liquid in glue (if the dye powdery, dry).
  • Stir glue with dye.
  • Now sprinkle Right into the container with glue. You will see that a thin film was formed on the mass. Mix the mass thoroughly. Repeat these manipulations until the mass completely becomes jelly.


  • Next, take Lizaun in the hands and good dislike his. At first he will rush and will not be elastic, it is not scary. Continue to form it for 3-7 minutes. And you will see that he became soft and pliable.
  • The lysun prepared from these ingredients will be small, so if you want to get a big toy, increase the amount of ingredients by half.

How to make lysun from silicate glue, toilet paper and nose drops?

For the preparation of lysun, you can use the most unusual and at the same time available ingredients. To prepare a toy for this recipe, we need glue, toilet paper and simple drops for niptycin nasal.

  • Silicate glue - 5 tbsp. l.
  • Toilet paper - 10 cm
  • Nasal drops
  • Dye

Making lysuan for this recipe you need like this:

  • Take glue and pour it into a deep container.
  • Add to it any dye Which you like. If this is not done, the lysun will be transparent and the pieces of paper will be prominted. We offer to take any bright dye, for example, yellow or green.
  • Toilet paper You need to break into small pieces. It is best to give preference to a soft toilet paper, as it is much better and quickly softened in the glue. Also toilet paper Can be replaced by conventional paper napkins.
  • Add crushed paper in dye colored glue and stir carefully. After that, the glue is absorbed into the paper and the mass will become more homogeneous, but the liquid and not viscous.
  • Now take the drops for niptycin nasal and add a few drops to the ground, mix the ingredients. Do not add a lot of drops at once, otherwise the lysun may not be elastic.
  • Having stirred, you will see that it has become more thick and jelly-like. Add a tool until the mass becomes sufficiently thick.


  • Next, take Lizaun in the hands and pretty froms For 5 min.
  • After that, the toy will become soft and elastic, it will be used to stretch it and tear.

How to make lysun from toothpaste?

You can not believe, but such a fun toy can be done with just one ingredient - toothpaste. Let's try.

  • Any toothpaste
  • Massage Oil
  • Sequins

To make lysun:

  • Take any paste. Its color, manufacturer, etc. do not matter. Place it in deep container. Focusing that how much paste you take, this size and will be lysun, since other ingredients will not be added.
  • Next you can do this: soften the paste on the steam bath. In this case, place the container with paste into a large boiling water container. Constantly stir the paste until it becomes more viscous.
  • You can soften the paste with microwave. In this case, place the container in the microwave and, turning it on for 10 seconds, soften the paste. Get the lot if it is still not viscous, repeat the manipulation.
  • After that, apply at the hands quite a bit any massage oil Take into the hands of the chilled lysuine and trough to disline it.


  • After 3-5 minutes. The toy will become very soft, nice to the touch, well-stretching.
  • Optionally, you can add sparkles in the slider. Note that the sparkles can be colored lysus in their color.
  • You can also initially paint the paste in any color using the dye.
  • If you want to remove a strong smell of toothpaste, add a little to the slide essential oil For example, lemon, tangerine.

How to make lysun from dish and soda detergent?

This recipe is very simple. With it, you can easily and quickly make a very soft and elastic lysuine. At the same time, the ingredients for its preparation are definitely found in every home.

  • Dishwashing liquid
  • Dye

We make a toy in this way:

  • In the container, pour the dishwashing agent. The size of lysuine will depend on its quantity, so take at your discretion. The tool can be taken absolutely any, but it is better to give preference to a more thick.
  • Color It also does not matter, however, if the color of the means is green, then the lysun is green. If you want to get your color Lizun, use a transparent tool and dye.
  • So, if you want to paint lysun, add to the tool dye And mix well a lot.
  • Now gradually add some soda to it. To begin with 1 tsp.
  • Stir the mass, look at her consistency.
  • Add soda and mix with the means until the mass becomes thick and jelly-like.
  • After taking lysen in hand and good dislike his. It will take about 5-7 minutes.
  • That's all, you can play.


How to make a lysun of glue pencil, soda and air freshener?

Of which only unusual ingredients can be made lysunov, this recipe is confirmed. Just imagine the adhesive pencil, soda and the usual air freshener will help you to make an interesting lysun for yourself.

  • Glue Pencil - 70 g
  • Soda - half a part
  • Any air freshener

We proceed to work, now there will be to make lysun with the freshener:

  • As glue is not for sale brossomes, and is made in the "pencil", we need to remove it from the tank and cut into small pieces. The smaller there will be pieces, the faster the glue is mocked.
  • Next, we need to melt glue. You can do this with the help of a microwave or steam bath. The first option will be less time.
  • Melted glue It will be similar to the usual liquid transparent glue.
  • In 1 tsp. Water dug soda, and after the liquid, add to the glue and mix thoroughly. After that, the mass will become more dense and viscous.
  • At this stage you can add anyone to the toy decorating elements, for example, shine, balls, beads, dye, etc.
  • Now sprinkle on the mass of the air freshener and quickly mix it, it will become even more shore-like.
  • Repeat such manipulation until the lysun becomes the desired consistency.
  • Note after mixing lysus in a plateHe needs to be thickened well with his hands, only after that he will become elastic and stop sticking to his hands.


How to make edible lysun?

Interest little child You can such an unusual toy as edible lysun. You can cook such a delicious toy along with the baby.

  • Any chewing candies - 150 g
  • Powdered sugar


What you need to make edible lysuine:

  • Candy can use any, the main thing that they were chewingsince we have to melt them
  • Take all the candies and put in deep container.
  • In another container, more than the way you put candy, boil the water.
  • Put the container with candies into a container with boiling water and, stirring the contents, melt it.
  • Next, give the candy mass a little cool.
  • After sprinkle a mass of powder And dress it like dough.
  • Add to ground powder until it becomes elastic and soft. Also note that the mass should stop sticking to the hands.
  • If desired in such edible lysun You can add food dyes.


As you can see, make lysune with your own hands, you can very quickly and easily. In this case, such a toy will not work dear, because the ingredients for her cooking are in every home. Today we told not all recipes for which you can make such a toy, so turn on all your fantasy and experiment.

Video: Edible lysun do it yourself

At last weekend, my sister asked how to make lysuun without a sodium tetraborate - she wanted to make an extraordinary photo session for instagram, and therefore I urgently had to look for a lesna recipe. What can I say? Lizun is done pretty quickly, there are many ways, there are plays and cons, I will tell about everything in order.

This is the best question that I had to answer on those weekends. Because my circle of communication is not too familiar with inst trend. In general, Lizun is a fun sticky mass that has some properties of Nengeton liquids. This is an elastic toy, sticky, which can and straw up a soft puddle, and gather in the elastic ball. Also this toy is called Handgam, Slum or Silly Putty.

An excellent way to take children is to watch this thing really cool and interesting, it is nice to play with adults and babies. I can also say that children such a toy will help develop the concept of Nengeton fluid and improve small motorAnd for adults, Handgam can be used as an anti-stress.

You can make lysunkers in different ways, I will tell you about everyone who managed to know.

Based on Stachmala

How to make lysuan from water and starch? The method is quite simple. Required:

  1. 1 tbsp. corn starch (should not be replaced by potatoes);
  2. 1 tbsp. warm water;
  3. 1 tbsp. PVA glue;
  4. dye (we used conventional dyes - moms were seized for Easter, and I buy dyes for handmade soap);
  5. you can also pour blasting or bulls (festive or those are used for manicure).

First, liquid starch is done - the entire glass of starch powder is needed to pour into a bowl and add a quarter of a glass of water. The rest is boiled to boil, intervene in the water of the disintected starch, everything is boiling around a minute with continuously stirring. This quantity is enough for three lysunkers. Next, we take a tight package, we pour a third volume of liquid starch, drip the dye (you should not pour too many, the dyes are well concentrated), and then you need to pour glue and sparkles.


After that, the package is tied, and a pretty kneading - there must be a mass in the form of sticky compote and a little clad. We drag the fluid, we rinse a cloth several times with a napkin. Your Handgam can be used.

Could not get the lysun from starch?Oh, in fact, it may not happen anything. This is the first lysun-anti-stress, which we did with my sister, and we did it, but when I decided to repeat this experience, I did not come out. Of course, I immediately began to be interested in the forums, how to make lysuan from starch and why I did not come out.

And it turned out that if Add too much glue (or it is some kind of high quality and good), then Lizun will be sticky. And if too much starch, it will fall apart.

Especially for children

Young mothers crave to find out how to make lysun without glue and sodium tetraborate. In general, why many people want to do different things with their own hands at home? The bottom line is that the child who plays with Handgam is capable of accidentally shove the mass in the mouth and lay off, or just to hold in his hands for a long time, so it's natural to no one want to damage the child, or a solution of the tetraborate. Much easier to build a slide out for a couple of minutes detergent, or from soap and salt.

How to make lysuan from flour?

  • So, it is necessary to mix flour with cool and heated water.
  • The mixture is stirred (it takes about 300 grams of flour, 1/4 of the cold water and the same amount of hot).
  • For a beautiful shade take a dye or ordinary gouache, watercolor.
  • It is very interesting to happen if you make two lumps different color, and then minimize them.
  • As soon as the mixture is homogeneous according to the consistency, it is cleaned into a cool place for three hours.

This is a simple lysun, with which even a child can play safely.

Shaving foam

And how to make lysun from a shaving foam? In principle, the lysun from the shaving foam is easily made - the adhesive tube and a certain amount of shaving foam.

It is difficult to predict the exact amount is difficult, so we do so - put 100-200 grams in the plate (all the bottle), and then inject the foam on the eyes and begin to mix. You need to add foam, seeking the consistency you need.

In general, the lysun from the shaving foam can be pure white (color is tight and beautiful), and you can drop a couple of milliliters of the dye. By the way, you can drop several different droplets, then the marble Handgam will be.

Look a fascinating video How to make such a lizankchik:

Shampoo and Sol.

We also learned how to make lysun from shampoo and salt. You need to take any shampoo (we took a transparent daddy shampoo blue) - you will need 3-4 tablespoons. And then you need to pour salt into shampoo and stir well. You will see how gradually the liquid mass becomes curly and ceases to be such a lipuch.

We didn't like this option too much, it's more like a sticky jelly, and not as a standard ordinary handgam, but it is also a very busy thing, it will be fun to play.

Shampoo and starch

How to make lysuer from shampoo and water with starch:

First, make liquid starch (I wrote above how to do it properly - corn starch with a water), and then you need to add shampoo and kneading it. Mass need to withstand in the refrigerator.

Soda

If you need to make Handgam for adults, I advise you to watch the video on how to make lysun from soda. However, it should be noted that the kids are better not to give this mass, and after fun you should wash my hands.

Soap and glue

Another recipe is how to make lysun from liquid soap. Again, nothing complicated. Go to the construction store and buy polymer glue - well, for example "Titan." And then mix three pieces of glue and two parts of the liquid soap. If you take a color transparent soap, then the lysun will be transparent.

By the way, there is another cool recipe, how to make lysun from soap - just add soda and salt into it and mix well, and then hold the mixture in the refrigerator.

Toothpaste

A simple way to make lysun from toothpaste - you need to mix a small tube of glue and a pack of gel toothpaste. Then you need to wash the mixture thoroughly and cool in the refrigerator about half an hour. I will immediately say, lysun from toothpaste very much smells of toothpaste, so it's best to add a couple of drops of a perfume composition into a mixture or ordinary essential oil.

Another interesting lease from the toothpaste is obtained using the polymer glue - if you beat the mixture well, then there will be even air bubbles in it (it looks very beautiful in the photo and video). The ratio of this - 100 grams of toothpaste will need 40 grams of glue (the same "Titan" is suitable).

How to make lysun from toothpaste without glue? It is possible to experiment with sodium tetrabrate - add to the mixture of toothpaste, salt and shampoo a few drops of the tetraborate, and then slow down and cool down.

And if you want to try how to make lysuan with a tetraborate, then you will like this lesson - it turns out the lightest and most beautiful Lizun Antistress.

By the way, while googled recipes, I saw that many asked how to make a lease from paper. The simplest knowledge of chemistry suggest me that in any way. However, you can make Handgam with the addition of paper sparkles or confetti.

So that the lysun from the soap stretched better, drip into a mixture of vinegar, and for greater smoothness, add some glycerol.

So that the leasing from the PVA adhesion did not fall for a long time, keep it in a bank or in a dense package.

You can still make lysuer from plasticine and gelatin. In my opinion, this is the best lysun without glue and tetraborate. By the way, without sodium, the tetraborate can also be made slim from soap and salt - just mix the liquid soap with salt.

Check out the video and find out how to make lizun from glue and water:

How to care for slide

In general, the easiest way to care for the slide is to wash regularly, and a week later to make a new one. Well, in fact, any handgam made for children is enough for a week (even if in the recipe it is written that for a month). The boragins begins to disperse, the components of the detergent substance begin to decay into the components. And even a child can make a new slide - most importantly, pick up easy recipe (Almost any of those that I listed) and trace, so that the baby does not pour into the eyes of the soap and did not try to taste glue. Make beautiful and bright lesunks, play with them and try new recipes!

Now you know how to make lysun at home without sodium tetraborate and you can tell your friends how to make lysun at home.

The article tells how to make lysun at home. This funny pull is sold in stores in plastic storage cups. But it can be quickly and easy to make it in 5 minutes from the remedies. Instructions are very simple, and there are ingredients in every farm. Depending on the recipe for Lizun, you will need a shaving foam, a shower gel, glue, soda, salt, gouache, food dyes.

Create with children

If the toy is done for the first time, you need to take the easiest recipes recommended for children. For 5-10 minutes, the kids do not get tired, and when using safe drugs there is no risk for health. Recipes with minimum ingredients just what is required for collaboration Above the creation of toys. In the future, the child will be able to fantasize and cook slims on their own.

Soul gel

This is a safe recipe for a child, because in the manufacture of pulling is not used glue. Take 150 ml of children's shampoo and shower gel. Steps only two.

First - in a deep glass plate Mix the shampoo and shower gel.

The second is the resulting mass in the refrigerator for an hour.


From shampoo and salt

There is the easiest way to prepare a pulling from the girlfriend. You will need: 0.5 teaspoons of salt and 4 teaspoons of shampoo. And again two steps.

The first - in a bowl, add the shampoo and small portions add salt.

The second is well mixed until the mass starts stretching.

The process takes about 5 minutes. The resulting mixture left in the refrigerator for several hours. The usual table salt is used to prepare a different type of pull. Read more possible methods Use is told in the article: ".

From cream and flour

For the manufacture of a slide at home for 1 minute, this recipe will require 2 components: body cream and flour.

Mix more convenient on a cutting board. Let's squeeze around half a cream tube and add to it gradually flour, constantly kneading. First, this will require a spoon or wand. The process is then reminiscent of the kneading test when it crushes his hands.

The amount of flour is selected "on the eye". As cooking it will be clear how much the cream will take cream. The resulting pull should be labeled 5-10 minutes.


From shampoo and sugar

For the manufacture of the next slide with your own hands, a thick shampoo and sugar will be needed from two ingredients.

Connect the components in a deep bowl and mark it up to a homogeneous substance. The amount of substances used depends on the desired dimensions of the slide.

Sukhara add so much that the composition becomes thick. Cool Lizen B. freezer couple of hours.

From nail polish

There is a simple instruction of Lisa from varnish and vegetable oil. As a basis, you can take a varnish of any color, matte, with sparkles of various shapes or with mica. It turns out very beautiful pull.

In the glass bowl, connect varnish and oil in any quantity. The more ingredients, the volume will get the slide. Stir the mass until the color ball is accompanied.

Now put on gloves, carefully get this clock and knead it with hands for 5-10 minutes. So that Lizun was more elastic, leave it in the refrigerator for an hour.


From starch and glue

For the preparation of lysuine on the next recipe you will need PVA glue white color, Liquid starch, food dye and package. If there is no dye, it can be replaced with a gouache. The recipe is also very simple.

In the plastic bag, pour 75 g of starch, which is used for washing. The usual food is suitable, but for this it needs to be divorced in water in the ratio of 1: 2. Then add a couple of paint drops. If it is too much, the lysun will start to dump the skin. You also need to pour 30 ml of glue.

Now make a package and shake it hard while the makeup will not accept the consistency of the clock. Gently laughing toy with a paper towel to remove the liquid. That's all, pulling is ready.


Lysuns of 3 ingredients

From stationery glue, water and paints

Now let's talk about how to make slot at home from three ingredients. It is easy to cook, but a little longer than in previous recipes. But it turns out as a real from the store. Take:

  • pVA glue (one tube);
  • water (third or a quarter of a glass);
  • gouache (floor of a teaspoon - color intensity at will).

In the glass, connect the water and the glue tube. Then add the paint of the desired shade and continue to interfere a couple of minutes. Slum is ready.

Do not use expired glue, otherwise the toy will not work and can harm health.


From Pva, Buras and Guasha

For the next recipe, you will need to buy sodium tetraborate (boor). It is sold in pharmacies. Also need glue and gouache.

First, in a deep bowl, connect glue and a little guaashi, mix. Then we gradually enter the boor 2-3 drops. Constantly stir until the lysun becomes thick.

The final stage is the arrangement of the hands of another 5 minutes. As a result, it turns out an excellent slider that does not stick and stretches well.

From soap, salt and soda

There is another very easy pulling recipe. You will need:

  • liquid soap (100 ml);
  • salt (1 teaspoon);
  • soda (as needed).

Connect the soap and salt by dissolving solid crystals in the liquid. When stirring it is undesirable to beat the foam. Now add the soda to thickening the composition. Mix it about 10 minutes.

You can improve the toy and after mixing all the ingredients add a dye. To paint diverge evenly, you follow a few minutes to wash the slide.


Lysuns of 4 ingredients

From food soda

Funny slim is obtained from food soda, which is in the kitchen every mistress. You will also need a gel dish and water washing.

Pour into the deep container detergent and gradually add water. There are no clear proportions. Take such a number of components so that the mucus becomes more liquid.

Now pour 2 teaspoons of soda and begin to mix. If the mass is too thick, add water. Lizun must be kneaded as a piece of dough until it starts to stretch.

From soda, glue, gouache and water

Homemade slims can be prepared from more ingredients. This recipe is similar to one of the previous ones, but the soda is also added. For cooking you need to take:

  • water (1 cup);
  • gouache (optional);
  • pVA glue;
  • soda (as needed).

In deep glass tank, mix the glue tube (PVA or stationery) and a couple of drops of paint of any color.

In a glass with water, dissolve soda. Then slowly pour the tinted glue and mix.

Continue to wash the mass for another five minutes. Properly made lysun does not stick to the hands.


Foam for shaving, salts, shampoo and paints

The components for this recipe are also very available, and the technology is simple. Required:

  • shaving foam (gel is not suitable for this recipe) by volume of the cup;
  • salt salt (1-2 teaspoons);
  • thick shampoo (2-3 spoons);
  • dye (at will and taste).

In glass tank mix shampoo, foam and food dye. Gradually we introduce salt. After the confluence of all ingredients, the prepared composition is kept in the refrigerator for 30 minutes.

You can make a multi-colored pull, if you share all the components into two parts and to paint into a specific color each of them. Compounding colors Already during the game adds diversity and fun.


Fast recipes

From toothpaste and glue

Touring independently can be made even from toothpaste. The process of creating this type of toy will take a few minutes. Take PVA glue and toothpaste helium consistency.

Sull the tube pasta in a bowl, mix and simultaneously pour PVA (one bubble). It is necessary to wash the composition until a homogeneous mass is obtained. If you do not like the sharp smell of pasta, you can be killed two drops of essential oil.

From water, ice, soda and glue (decorate sparkles)

Now we'll figure it out how to make Original slim with sparkles. Take:

  • water;
  • several pieces of ice
  • soda;
  • glue;
  • sequins.

In a bowl, pour water (floor glass), add ice and soda (2 teaspoons). Break up to completely dissolve ice.

In the resulting liquid, pour the stationery glue bubble in such a quantity so that after stirring the lysun began to stretch.

Now we need to knead the resulting mass and pour sequins into it.


From the glue of PVA and shaving foam

Now we will open the secret, which make snow-white lysun, who really like the children. Take:

  • water;
  • sodium tetrabrate;
  • foam to shave.

In the glass container pour the 1.5 teaspoons of the boos and a little warm water, stir. At the next stage, add glue, foam and again stir the resulting mass.

Now pour 2 more teaspoons of the borants. Must get sticky pull. Remember our advice - add a boor until the lysun stops sticking to the skin.


Recipe for shaving foam and soda

There is another recipe that even the child is even forces. It turns out the real slim, like from the store. Required:

  • liquid soap;
  • bura;
  • soda;
  • shaving foam.

Shaving foam is a popular component for slots. Tying is fluffy and just like ready from the store. But the lysun can be made without this ingredient.

From varnish, glue and tetraborate sodium (borants)

To create a slide on this recipe, you will need: any glue, nail polish, a bora and water.

Couple in a bowl of a tube glue and nail polish. Pour 150 ml of water, 1 teaspoon of borants and interfere with 5 minutes. If the lysun does not reach, add some more boos.

Safe slide

However, glue and bora - not best tools For children's hands. They can cause a negative reaction to the skin and a strong allergic reaction. Therefore, for kids you can make an environmentally friendly toy-pull. Take flour, warm water and food dye.

Connect all components and mark up to homogeneous dough consistency. Leave the lysen in the refrigerator for 2-3 hours. Safe toy is ready.

Reading time: 9 min

4.7 / 5 ( 6 votes)

Today, about this fun toy, probably everyone heard. For millions of children, an interesting colorful gum is one of the most beloved toys. As it turned out, make lysuun at home personally quite simple.

It is necessary to figure out what the lysun represents, and consider a certain number of options, how to make lizen's houses, independently with their own hands.

What is "lysun"

Slum - so originalized lysuine. The creators of the toys are considered to be Mattel. Date of birth toys - 1976. Call a leson toy began in the 90s of the twentieth century, when the cartoon "Hunters for the leaders" came out on the screens. One of the characters of the cartoon was lysun (ghost).

It was too similar to the slide: the same green, easily passed through the walls. And on the surface, after it, a sticky mucus remained, a greenish shade.

One in one, as well as the slider, the lysun is a soft jelly substance that can easily change the shape, but does not melt in the hands. It happens and firmly, and elastic, if a sharp or strong impact, sticks to the surface of the ceiling, flows through the wall, leaving an unattractive mark, after itself. If there is a desire, the toy can take the most different shape.

When the child played, the toy is put in the jar. If you store, in compliance with the rules, for a long time it can be used.

According to psychologists, the toy Lizun is a wonderful antistress. With her help, the baby can relax. His imagination will be occupied. The child will grow with a good fantasy. In addition, with the help of the slide, motility, motor activity, is reinforced, the nervous system is strengthened. There is a workout of memory, view, attention.

Lizun is a great entertainment for the children.

Children not only have fun, playing with lysun, but also get rid of stress. Nervous system Gets a beneficial effect. Small muscles hand, in the game of the game, develop well, like Motorika.

Toys have a gel consistency. It can not melt, and may take the most unexpected form.

In every store where toys for children are sold, you can buy lysunov. But this toy can be made at home. Why not do it with the child? This is not difficult at all.

Time this process does not take a lot. Here too expensive materials and tools will not be needed. It is worth considering the options that are affordable and interesting to make this interesting toy.

How to make lysuana with your own hands at home

The easiest way: Lizun from starch

This recipe is simple and safe. This result is achieved because there is no boric acid, glue and detergent. If you do lizun, using starch, the process steps will be simple. All actions are easy to work for both the child and for an adult.

What will take (materials):

  • potato starch (150 g);
  • warm water (75 ml.);
  • food dye (2.5 g);
  • It is necessary to prepare a bowl and a spoon to mix the components.

Instructions are step-by-step:

  1. In the bowl, pour starch.
  2. Add dye. Stir it with starch.
  3. Slowly pour water, while stirring composition.

At first glance, first, it will seem that the lysun did not work, and this is simple kissel. But when mixing is long, it will become visible how the liquid has become elastic aliens.

Lizun, which is completely safe, you can play. For a child, usually, the resulting toy is of interest the first two days.

Then you have to do everything again, according to the recipe, so that I get a new lysun.

Sparkling Lysun from PVA glue with sparkles

To prepare a slide using sequin, you need to have at hand:

  • glue, in which there are sparkles (100 ml);
  • water (250 ml);
  • bura (1 tsp);
  • water (1 tablespoon)

Pour water into a glass. Stir, in it, boor. A brilliant stationery glitter is poured into a bowl. All. There will be 1 tablespoon of water. It is poured into a bowl with glue.

Stir good to make the mass acquire flexibility and compliance. After that, the solution of the borax is introduced, and mix up to the required consistency to make a lease.

Lysun without sodium tetrabrate and without glue with detergent

In the event that a campaign in the pharmacy is not in the plans, but I want to make Lizun right now, this option is suitable more than others.

Making lysun, externally, almost not distinguish from purchased. Since it is necessary to use the detergent for the manufacture of this type of lysun, it will be necessary to wash your hands thoroughly.

Need to take:

  • dishwashing liquid
  • bowl for mixing components
  • hand cream
  • dye.

How to do:
In proportion 1: 2 it is necessary to connect a dishwashing detergent with soda. Mix all preachties.
Add hand cream. Mix the mass. How much it will need glue, it will be seen when the ingredients are stirred.
Pour the dye.

Once all the indicated components are smeared, it is worth paying attention to the mass. It should be slightly liquid.
Lizun, which is still not ready for another 100%, you should fall asleep into the package. Then, on 4 hours, send to the refrigerator. How time will pass, pull out a toy, and having fun.

Method Make Lizuuna Shampoo

Funny lysun can work out if using an ordinary shampoo, add dyes and polymer glue ("Titan" is great)
Shampoo (100 ml) poured into the container.
Pour food dye (1 tsp).
Stir.
4 tablespoons of glue are connected with a painted shampoo.

The resulting liquid mass is poured into the bag, and crushed hands to get the necessary density.
Pull the substance that turned out. Everything! Lizun from shampoo for children is ready. Put in the container with a lid so that the toy is stored there.

The most harmless is wheat flour

If you take flour, the fun for the defensive will be absolutely harmless. What to do?

  • Through the sieve, 2 tablespoons of flour sifted.
  • Top pour 50 ml of cold water.
  • Then 50 ml of hot (boiling water cannot be applied).

  • Mix ingredients to get homogeneous consistency.
  • Pour the food dye (3-5 drops).

  • If there is a desire, add salt or sugar.
  • They interfere with the dough until the whole mass acquires one shade.
  • Place in the refrigerator, 3 hours.

  • Take out.
  • Missing hands.

Lizun from alcohol and sodium tetraborate

Yes, this method cannot be called standard. But how interesting to do this toy! Only that the result does not disappoint, you should not "move away" from the formulation.

Need to stock:

  • Polyvinyl alcohol;
  • Water;
  • Sodium tetrabrate (buroy);
  • Dyes (if there is a desire).

Not a problem to buy in the pharmacy Buru. It is implemented without requiring a recipe. The price of means is low. It is necessary to take into account that the polyvinyl alcohol is sold, like a powder, not liquid. This component is the most important in the recipe. That is why, in this case, neither vodka nor medical alcohol is suitable.

What to do:
Pour polyvinyl alcohol in a bowl (a little). Mix. Put on fire. Cook, 40 minutes. At the same time it is necessary to stir all the time. So that the mass is not burned, the fire makes weak. After the bowl was removed from the fire, the mass should cool.

It is desirable to room temperature. When the alcohol y was allowed to cool, at this time other components mix. Water poured into the glass.

1 or 2 tablespoons of sodium tetraborate are poured. Everyone is carefully mixed up until the crystalline borax in the water is completely dissolved.

After that, the fluid that turned out is to be strain. Add alcohol (it will cool, by this time), in a ratio of 1: 3. Pretty smear. If you want, the food dye is added. You can use a toy!

Color Lizun from glue and water bora

This method was popular. The mass of all sorts of ways is invented. And which ingredients do not apply! One of the methods can be considered in detail.

Have to take:

  • warm water (200 ml);
  • jar of glue PVA (or two);
  • dye food;
  • buru (2 bottles).

Before starting to work, the tube with glue shakes. Then he poured it into a deep bowl. (Can and ordinary glass jar use.)

You will need another bowl. They mix the water with the dye, and pour into the jar with PVA. Until the homogeneous mass fails, all components are mixed.

After that, boric acid should "go" to a mass containing glue. As a result, it will be seen how the mixture becomes viscous and dense, according to the consistency. After the crash appeared, and the mass became thick.

It needs to be demolished, putting gloves. If there are no at hand, then stirred in the cellophane package. On the leaf lay out the resulting Lizun, half an hour or an hour. Everything. The child can play.

How to make plasticine with gelatin

Plasticine, as a rule, is in those houses where children live. It is this material and it will be useful to make a popular toy. The result will be satisfied!

What will have to be prepared from materials and tools:

  • 1 pack of plasticine;
  • 1 pack of food gelatin;
  • blade to mix ingredients (or spoon);
  • jar or bowl for mixing;
  • iron bowl to warm up gelatin.

How to do:
First, the gelatin should be pouring into a bowl of iron. Pour with cold water. Mix thoroughly. Leave for 60 minutes. As time passes, you need to warm the gelatin, which was clumsy. Bring to a boil, and immediately retain the container, removing it from the fire.

You need to take a container (better - plastic). Using the blade, stir water (50g) with plasticine (100g).
In the resulting mixture, slowly, you need to pour gelatin, which is already cooked. The spatula is stirred to get plastic, homogeneous mass.

A bowl with a mass is put on the shelf of the refrigerator so that the product is froze. After that, you can get, and give the child lysune.

Lizun, made of spirits and hand cream

If you take the hand cream, Lizun can work out. But 100% guarantees are not. But why not risk?

  • The cream squeeze into the bowl.
  • Add dye. Stir.
  • A slightly add perfume. The resulting mixture is stirred. She should start thick.
  • As soon as the desired consistency turned out, the toy is kneading.

Funny transparent lysun

To make such a toy, there will be no difficulties. For its manufacture, you need to prepare such components and materials:

  • Transparent PVA glue (100 ml). It is sold in stationery stores.
  • Boric acid, in the form of a powder (1 tbsp);
  • A bowl in order to mix the ingredients;
  • Wooden stick or spoon.

Step-by-step manufacturers at home:

  1. Pour glue into the glass jar.
  2. There is also a boric powder.
  3. Mix thoroughly so that it turned out homogeneous elastic alien.

Everything. Lizun can be played. Only a child must say that it will be necessary to wash your hands with soap after the game.

Simple lysun from toothpaste

What you need to have to make this toy:

  • Tube toothpaste.
  • Glass.
  • Food dye.

Step-by-step instructions for cooking lysun at home:
In the glass squeeze the message to the tube of toothpaste. It is advisable to buy or gel, or thick on consistency, pasta. Send dye to the glass. If you add this component more, the lizen shade will be saturated.

To get a homogeneous mass, you need to thoroughly mix the mixture. It is necessary to watch all the grains of dye dissipated.

As soon as a homogeneous mixture turned out, you need to send it to a water bath, 15 minutes. This is quite enough. It is necessary to do this to eliminate excess moisture. As a result, the mass will acquire a dense structure.

It is necessary to ensure that the lysun does not get very dry. So that this does not happen, it is preferable to smear your arms and toy toy. The size of the toothpaste used will depend on the size of the lysen.

Lizun from soap and toothpaste

To make a toy, you need to stock:

  • toothpaste
  • liquid soap;
  • dry dye;
  • flour.

Step-by-step instruction:

In the 1: 1 ratio, soap and toothpaste are mixed.

Mix dye with flour. When flour is added, it is necessary to mix the mixture, without stopping. If you take soap and paste, in the amount of 20 g (each component), then the flour is enough for 5 ppm.

When all the flour is poured, the whole mass is mixed well so that the dough does not get a homogeneous structure.
A little water is advisable to pour. Then the mass is kneading, until the Lizun becomes drumming.

Easy way to make lysun from hydrogen peroxide

Since the costs for the manufacture of such a toy are small, this method has become very popular. But some people are disappointed, because they hoped for another result. According to this recipe, the toy will be solid, but it will jump well.

You will need:

  • 1 cup of water;
  • 100 g of starch or soda;
  • 100 g of glue PVA;
  • hydrogen peroxide;
  • dye.

It is necessary to have a medium-sized container. There it will be necessary to mix water with soda (or starch), equal to the ratio. It is necessary that the gloomy state of the mass is obtained. Then you need to pour glue. Stir good.

This mass must be pouring hydrogen peroxide. Add dye. Stir again. It should be noted that lysun, in the end, becomes air based precisely due to hydrogen peroxide. If it became clear that the mass is too thick, it is necessary to change the proportions by adding more water.

Lizun using washing powder

To make such a lysome, it will take the use of a liquid analog of washing powder. You do not need to try to use a gel or liquid soap. The toy will not work, because the consistency will be different.

Before making making, you need:

  • pVA glue;
  • liquid washing powder;
  • food dye;
  • subtle rubber gloves;
  • container.

Production Stages:

In the cooked bowl you need to pour PVA glue (1 cup). You can pour large quantity, and you can - less. It will depend on what size I want to make lysuine.

Rope 5-6 drops of food dye in PVA. Stir until the mixture does not get homogeneous color.

Take 2 tbsp. Liquid washing powder. Pour into the mixture. Pretty mix the solution. It will be seen how, with time, it becomes sticky. You need to bring the solution to the state of putty. In the event that the solution is very thick. On the droplet, you should add liquid powderTo dilute the lot.

Wear gloves. Remove the solution from the bowl, and start swing it like dough. It is necessary to get rid of extra drops of powder.

If this is not done, the lysun will be similar, on consistency, with soft rubber.

It is necessary that the toy is stored in a closed container. When it became clear that the toy loses its properties, it must be put in the refrigerator, three hours - four.

How to make lysun from magnets

Magnetic lysun is considered the original toy. He will be able to make a radiance in the dark. You can do this toy yourself at home.

  • neodymium magnets;
  • bor;
  • water;
  • glue;
  • iron oxide.

1 cup of water is poured into a bowl. Add 0.5 tsp. Bills. It is well stirred for complete dissolution of bors in water. Need to be a mixture to activate the second half of the composition.

1 cup of water is poured into another bowl. Add glue (30g). Mix well. Pour paint. To Lizun pleased with the radiance in the dark, it is desirable that phosphoric paint can be used.

In a mixture, where glue is poured, gradually, the solution of the bonds. At the same time, all the time it is necessary to mix the adhesive mixture. At that moment, when the mixture becomes solve and acquire the necessary consistency, the bords are not needed to add. What remains is poured.

Lizun, which will work out, must be loosen on the table, or an honorable. Iron oxide poured into the center of the toy (slightly). They smear lysuine before he won't become gray.

Magnetic toy is ready. When the lysun is in contact with the magnet, it will crawl behind it.

Lysun from foam for shaving do it yourself

As it is clear from the header, the main component, in the manufacture of toys, there will be a shaving foam. The recipe is popular because it is simple.

You need to prepare materials:

  • Shaving foam (150 g);
  • 100 ml of PVA glue;
  • Mid-sized bowl;
  • Spoon for mixing components;

How to make lysuan at home from male shaving foam:

Pour glue into the container.
There, gradually, pour foam. Keyword "gradually".

When Lizun became driving and elastic, it suggests that foam is added enough. That is why 150 g is an approximate reference point. The person who makes Lizun must take control of the number of foam.

The components are stirred until the bowl is founded, the structure of which is dense. He should not adhere to the hands.

Further mnouted in this moment until the structure becomes elastic. If the slide smelled well, he will not stick to his hands.
If you want a toy to be bright and beautiful, add food dye, in the process of manufacture.

What to do if the lysun did not work

In the event that Lizuun failed to do so. As it was intended, all errors are easily corrected.

  1. To the toy to give elasticity, you need to add a few drops of vinegar. Then it will be better to reach
    If you add a few drops of hydrogen peroxide, the mass will turn out more lush. Usually, it is done in the manufacture of phlastic slide.
  2. To Lizun Slip, it is necessary to apply glycerin.
  3. Glowing toy do with fluorescent paint.
  4. When the slider turned out to be very soft, it is put in a jar, a slight salt is poured on top. Close the lid. So the toy should stand all night. The toy will become elastic, as the salt will absorb extra moisture.
  5. When the slide turned out to be solid, it is possible to soften the structure, if you put lysuine into the jar, and, adding water, leave it overnight, under the lid.
  6. To give a toy a pleasant aroma, it is desirable to use essential oil, vanillin or food flavoring.
  7. When adding the smallest sawdust or iron oxide, a magnetic lysun will be obtained. The toy must be cleaned good for the uniform distribution of the additive. As a result, the toy to any magnets will reach.
  8. "Anti-stress toy" will turn out if the mucus turns out to be in the balloon. Do this using a big syringe without a needle.
  9. In order for the slide to do more, in size, its hour at 3 is placed in a bowl of water. You should not worry if it disintegrates into several parts. All by the rules. You need to add a slightly slightly cream for body or hands and salt. Mix. Lisun and elastic will become and will increase in size.

On a note! You can add foam balls to the toy, different colors. This will not only increase the size of Lizun, but also will make it bright.

Lizun care rules

The toy, from which is delighted and the rate, and adults, sticks to the surfaces and leaves no traces, after themselves is the famous lysun. It can be compared with dense kissel, or with jelly.

Make it using a jelly-like material. That is why, with time, it ceases to be elastic and attractive.

If you know the rules for the sleeper, it is possible to extend its operation. It is necessary that the toy "was neat". That it was nice to play.

Where to store

For lysuine, it is necessary to highlight a separate container in which there is a lid. Store it on one of the shelves of the refrigerator. Storage in the freezer is excluded.

How to care for slide

The main thing that should be adhered to is to ensure that the lysun is not dirty. Lisun has sticky properties, so it is, with ease, small pieces of garbage stick. It is desirable that the toys are not in those places where there is dust.

For example, dust accumulates under the sofa. It is not necessary to allow the lysun to contact with surfaces covered with a pile. In the case of pollution of lizen, the garbage is cleaned using alcohol. The second option is removed, carefully using tweezers or needle. You can also remove trash particles finger if it turns out.

Lizuuno "Do not like" if the air in the room is too dry, or vice versa is very wet. If dry in the room, it can become rigid, and lose the sticky properties. And if excessive humidity - he swells, and becomes more humid.

How to act, in such a situation? What to make that the form of toys is not deformed? If there is little moisture, Lizun will dry out. It must be saved if in his "apartment" (container), pour a little water (5-7 drops). Slum will absorb moisture. It will help him to recover.

If suddenly the toy has become a liquid, due to the excess moisture, help can use the usual table salt. A few grains of salt are poured into the container. Top covered with a lid. In the air "Domik" shake.

So that Lizun grew up, a few drops of water are poured into the container overnight. Close the lid. Put on a regiment of the refrigerator. It is impossible to store the toy in the freezer, otherwise the lysun will be covered with it.

When a toy, for a long time, was not played, he can moldy. If the mold was detected, it is advisable to throw away the slide.

Video: how to store lysun

What lysun or "Handgam" (Handgum) How else is it called? The name comes from the words "Hand" - a hand and "gum" - a chewing.

There are several ways to make lysun at home. They differ mainly ingredients that are used in the preparation of self-made lysuine.

Subject to all rules and great desire, Handgam at home can make in 5 minutes.

Click on one of the links specified below to go to the advice you need.


We need:

PVA glue, white, it is advisable to look at the shelf life and choose the one that has been made relatively recently.

Bura (Sodium Tetractural), 4% solution or Borax Powder (Borax) - can be found in the pharmacy (the recipe is not needed) or in the store of chemicals.

Food dye - you can go a gouache, beet juice (for red lysuine) or green (for lizen green).

Capacity (jar, any plastic dishes) and wand (blade) for mixing.

You can use some water.

Perhaps need a measuring spoon.

Step 1.

Fill the glass (or any of you comfortable capacity) PVA (100GR or 200GR) glue, having embarsed with a jar with glue.

* The more glue, the more your home lease.

Step 2.

We add a little dye into the container with glue (here the main thing is not to overdo it, otherwise your hands will be stuck). We thoroughly mix until the homogeneous mass of the desired color is reached.

Step 3.

Little by little, add a solution of the borax (1-2 vial). You can not regret the boor, otherwise the lysun will succeed in liquid and will adhere to everything in a row.

If you are using 100g glue, then according to the 1st bottle, sodium tetraborate will be enough. Thoroughly mixing the whole mass. As a result, it turns out a jelly, thick mass.

* If you have a boome in the form of a powder, take 1 tablespoon and dissolve it into the container on a glass of water temperature water.

Step 4.

Gently move the mass into the napkin to get rid of extra moisture. By the way, it is better to keep such a toy on paper, so she will collect less vile.

We lay out the mass in the package and knead (like plasticine) about 5 minutes. Take out.

Enjoy!

Below the video How to make lysun at home:


We do a homemade lizen without boron (sodium tetraborate) - from glue and starch.

Step 1.

We measure 1/3 cup of liquid starch and pour it into a small package, where we add a little dye.

Step 2.

Immediately add a quarter cup of glue and mix thoroughly before the formation of thick mass. Perhaps there will be some liquid in the package. Just remove the "home" lysun from the bag and can be enjoyed.

Of course, such a lysun does not compare with the store, as the guar gum will be extremely difficult to get.

How to make lizena from water and starch

This method is the easiest and less cost, but also the result it gives not quite expected.

Mixing starch and water in the same proportions you can get homemade lizen, not very pleasant consistency.

You can add more starch so that Lizun becomes thicker. Also add the dye and mix thoroughly.

  • With lysus flowers, you can experiment and even make a whole family of domestic lysunov. Same you can use various sequins, small asterisks, etc.

  • Can be used essential oilTo give Handgam an interesting smell.

  • If you want lysun to keep its properties and held longer, it is necessary store in closed dishes and in a cool place. Also, preferably do not lay lysun on the carpet Or another surface with which minor villins can easily stick.

  • In case Lizun begins to dry place it in a container with warm water.

  • Such a toy is not toxic and not poisonous, although of course you should not eat her hands after the game after the game.

  • It should also be noted that some try to make lysuer using soda instead of a boral or starch, but in this case it will be a rather solid mass. So you should not spend time at this time.

  • Remember that the life of such a toy is extremely short (about a week), so stock materials for the manufacture of lysunov at home, as the occupation is infectious!

For the first time, such a toy appeared in 1976, and was made by Mattel.

The film brought a huge popularity movie "Ghostbusters" (1984), namely, one of his main characters is a ghost named Lizun.

Handgam can play the role of funds for massage hands, as well as for development of shallow motility.

Lisun, which is sold in the store (it is "smart plasticine"), is the result of a mixture: 65% dimethylsiloxane, 17% silica, 9% thixatrol ST (castor oil derivatives), 4% polydimethylsiloxane, 1% decamythyl cyclopentasiloxane, 1% glycerin and 1 % titanium dioxide.

Did you like the article? Share it
Print article
Top