September 5, 2016
Specialization: finishing facades, interior decoration, construction of cottages, garages. Experience and gardener and gardener experience. There is also experience in repairing cars and motorcycles. Hobbies: the game is not a guitar and a lot more, to which there is not enough time :)

Each hostess dreams that her bath was snow-white and glitter just like in the remotional rollers of detergents. However, as practice shows, the result after their use is very different from the one that advertisers promise to us. However, you should not be upset, in this article I will tell you a vikatak to clean the bath at home "prudent" means so that the plumbing has become white and shiny again.

Before you tell how to clean up to Bela with folk remedies, I will give some care and maintenance councils. By adhering to them, you will significantly simplify the process of washing plumbing, as well as extend the life of its operation and keep the initial look for a long time:

• after operating the bath, wipe it with a dry soft napkin;
• make sure that the water does not drip out of the extension of the mixer and the soul, as this will lead to the formation of a rusty plaque. If the crane proceeds, it must be repaired;
• in no case are not attempting to rain the limestick, rust or any other mud with a metal brush;

• do not allow sharp temperature drops on the surface of the bath;
• do not put metal items in the bath. Buckets and basins must be plastic;
• before using detergents, make sure that they are suitable for your bath type. This is especially true of acrylic baths that are exposed to chemicals (acids, alkalis, solvents, etc.);
• wash the bath to Bela with the use of detergents (without the difference in folk or purchased in the store) at least twice a month.

If you adhere to these rules, you will not have to break your head, how and what to clean the surface to get rid of rust, lime plated, black spots, etc. In addition, plumbing will always gline.

Folk Methods Cleaning Baths

Now let's look at how to clean up to Bela by home the bath, if it so happened that the surface still managed to "promote" all sorts of raids and other pollution. It must be said that all sorts of cleaning methods there is a huge amount. However, we will consider only the most efficient and proven.

These methods include the following means:

Method 1: Soda with vinegar and bleach

First of all, I note that this cleaning agent is intended for a cast iron bath, since it consists of sufficiently aggressive components. To cook it, you will need:

• food and calcined soda;
• bleach;
• vinegar.

1. first of all, you need to mix the food soda with a calcined in equal proportions. Use several spoons of each soda - this will be quite enough;
2. then add quite a bit of water to get a mixture kashitsom;
3. the resulting composition needs to handle contaminated areas;
4. after that, it is necessary to mix in equal proportions bleaching with vinegar and apply liquid over soda;
5. after half an hour, the surface must be wiped with a wet sponge and then rinse large quantity water.

As a rule, the owners are interested not only than to wash the bath, but also to clean the tile so that glittered its surface. This remedy is perfect and for these purposes.

It must be said that this composition perfectly copes with a limescale, however, it can also be used to remove other types of pollution.

If you need to clean the acrylic plumbing, you can use one vinegar without soda and bleach. To do this, simply heal the napkins with vinegar and put them on a contaminated surface. An hour later, the napkins should be removed and then wipe the soft sponge and rinse with plenty of water.

Method 2: Lemon Acid

Lemonic acid is not only a very effective means of all types of plates, but also universal, which can be used both for plumbing covered with enamel and acrylic bath. The only one, depending on the type of bath, is used in different ways.

If the cast iron or metal, the instruction on the use of citric acid looks like this:

1. in the glass of water, it is necessary to dissolve one and a half tablespoons of citric acid;
2. the composition must then be applied to a contaminated surface with a sponge or sprayer;
3. fifteen minutes later, polluted areas need to be lined with a sponge dipped in citric acid solution;
4. when the surface is cleaned, the bath must be rinsed with cold water.

If the plumbing is acrylic, cleaning it is somewhat different:

1. first of all, in the bath you need to dial warm water;
2. then add a one and a half spoons of citric acid;
3. after 12 hours you need to drain the water with and rinse the surface of the plumbing. It is advisable to even wipe the brawl, moistened in the soda solution, and then wash. In this case, the surface is guaranteed to be guaranteed, the acid will remain, which is destructive effect on acrylic.

Method 3: Lemon Juice Bura

If you are looking for than to clean the brightly bathroom, covered with rusty spots, you can use the drone with lemon juice. Moreover, this composition is like all types of plumbing.

This means applies as follows:

1. pour a quarter cup in a container lemon juice And pour in it a boor. The amount of the latter should be such that a paste-like consistency is formed, but the crystals of the bears were dissolved;
2. the paste must be applied to rusty stains;
3. when the paste is dried, it should be washed with water. The composition must go along with rust;
4. if the spots are not completely, the procedure must be repeated.

If you need to clean the metal or from cement, for example, which has fallen on it during repair, use the compositions for cleaning the sewage, such as Krot.

Method 4: Cleaning Powder Paste

This composition is also designed to remove rusty plaque. However, it can be used exclusively for enameled plumbing.

To make this cleaning agent with your own hands, you must prepare the following ingredients:

It is used this tool is very simple:

• all ingredients must be mixed with each other in any sequence;
• the resulting pasta should be treated with rusty stains;
• after that, you need to wash off the paste together with rust running water.

Method: 5: Summer alcohol and hydrogen peroxide

Now consider how to clean the bath with an enamel coating to remove the lime bloom. To do this, you will need:

The work is carried out in such a sequence:

1. first you need to mix the components;
2. apply the solution to contaminated areas;
3. after 15 minutes, wipe the treated areas with a damp sponge and then add the surface with water;
4. if the flare is not completely removed, repeat the procedure again.

This means can be brushed from plaque not only to plumbing, but also a tile. The only one, before cleaning the tile, wash it with soapy, to first remove upper layer dirt and dust.

Method 6: Soda with a washing powder

Cleaning the bath at home can be effectively made by the medium washing powder and soda. For its preparation, prepare the ingredients in the following quantity:

This composition is used as follows:

1. dissolve in hot water soda and washing powder;
2. after that, process contaminated areas moistened with a sponge solution;
3. after 15-20 minutes, pay the contamination with a sponge moistened in the solution;
4. after that, the surface should be used to water.

If you need to remove black with metal bath, You can use the usual bleach, for example, a domain. The composition should be applied to a polluted area and then rub the sponge after 15-20 minutes.

Method 7: Calcined Soda with Economic Soap

A fairly effective bath for cleaning the baths from pollution of various types is an economic soap mixed with soda calcined. It applies as follows:

1. economic soap must be grate in a small grater;
2. after that, the soap must be mixed with soda in equal proportion;
3. in the resulting mixture, a small amount of water should be added so that it becomes wet;
4. the composition should be applied to a polluted area and leave for an hour;
5. at the end of operation, the processed areas should be wiped with a sponge, and then rinse with water.

Many hostesses are interested in the forums - than to clean plastic panels? Calcined soda with economic soap is perfectly coping with the task.

If the surface of the bath is too launched and covered with a raid, a small amount can be added to the mixture ammona alcohol.

Method 8: Trinitrium phosphate and hydrogen peroxide

Another old proven tool that allows you to clear the metallic or cast-iron bath Rust is a hydrogen peroxide and trinitium phosphate. To prepare this detergent, it is necessary to prepare components in such a quantity:

This remedy is manufactured with your own hands as follows:

1. dissolve trinitrium phosphate in warm water;
2. then gradually pour into the solution of hydrogen peroxide;
3. next, it is necessary to moisten the sponge in the solution and rub it with rust;
4. if there are barely noticeable stains on the surface, which do not rub off, they need to apply the solution and leave for 10-15 minutes;
5. at the end of operation, the processed area must be washed with water.

Method 9: Shanchaic acid

If you need to clean the acrylic bath from rust, take advantage of oxalic acid. To prepare the composition you need to dissolve the acid in the water in the proportion of one to ten.

After that, the solution should be applied to the yellowed sections and leave for an hour. After the specified time, the solution should be washed with water.

Plastic panels for the bathroom, in contrast to the bath itself, made from PVC, and not acryla. Due to this, chlorine can be used for their cleaning, for example, white. The only thing before cleaning the plastic panel chlorine take care of the air ventilation.

Method 10: Craw Salt with Wine Vinegar

Finally, consider another effective tool that allows you to get rid of even the oldest and entered rusty spots on the enamel surface. This remedy is manufactured as follows:

1. pour into the container 100ml of vinegar and add a tablespoon of salt into it;
2. the container with the solution must be put on the stove or in the microwave, and heat up to a temperature of about 60 degrees.

When the solution is ready, it must be applied with a sponge on rust and wash off with water after 20 minutes. As a rule, rust leaves after the first application of the composition.

Here, actually, and all folk ways Cleaning the bath from various contaminants. It should be noted that they are more efficient than the advertised compounds. This price of components are usually several times less.

Output

Each of the folk remedies described above is quite effective. Therefore, choose depending on the type of your bath, as well as the type of contamination and the presence of "at hand" of those or other ingredients. At the same time, do not forget that it is much easier to maintain plumbing in a purest state than to fight mud and raids.

Additional information contains video in this article. If you have difficulty with cleaning bath, ask them in the comments, and I will gladly answer you.

September 5, 2016.

If you want to express your gratitude, add clarification or objection to ask the author - add a comment or tell me thanks!

First of all, you need to put on gloves, choose the right washcloth and a suitable means. And then everything will depend on what exactly you need to delete.

How to clean different baths

1. Enameled cast iron baths. They cannot be rubbed with metal washcloths or rigid sponges. There remain scratches from this, the enamel layer is thinned. Also for cleaning should not use aggressive means with a high chlorine content.
2. Enameled steel baths. When washing it is impossible to turn on too hot water. Enamel can even sweep on a new bath with sudden temperature drops. As in the case of a cast-iron bath, under the ban is hard and metal sponges.
3. Acrylic baths. You need to wash carefully, because even the sponge of medium rigidity can leave ugly stripes on such a bath. Use only soft sponges and special cleaning products, preferably gels or pasta. It is impossible to use abrasive substances, washing powders, emulsions with alcohol, acetone, gasoline, chlorine. Soda and vinegar solution can be extremely rare and only in particularly severe pollution. In other cases, soda is better to replace lemon juice.

How to clean the bath from small pollution

Each time after water procedures, skin particles remain in the bath. This kind of wave is removed very easily: you just need to carefully solve the surface with water.

Soap accumulates on the surface of the bath, so ugly flutters and stains appear. Normal food soda will cope with them.

1. Water the surface of the bath.
2. In a basin with water, spread the polls of the food soda so that it turns out a thick mixture.
3. Apply the soda with a soft sponge to the surface and leave half an hour.
4. Wipe the sponge bath and wash the soda with water.

How to clean the bath from lime

Hardwater contains a large number of magnesium and calcium salts. When they settle, the plumbing appears on the land, from which it is more difficult to get rid of than from soap.

Method 1. Acetic soda solution

1. Mix ½ cup of food soda, ½ cup of water and ¼ cup of vinegar. If you are going to wash an acrylic bath, replace the soda with lemon juice.
2. Apply a solution on the bath and leave for a while.
3. Watch the surface with a sponge and wash the acetic solution with water.

Method 2. Soda + lemon mortar

1. Mix soda with water so that it turns out a paste.
2. Apply on the bath and leave for a while.
3. Add citric acid into water in proportion 1: 1.
4. Apply the solution on the soda and wipe the sponge.
5. Rinse the bath with water.

How to clean the bath from yellow raid

Yellow raid may appear due to the poor quality of tap water or rusty pipes. It is possible to remove it with a dry bleach, diluted with water in proportion 1: 1. You should get a thick mix, similar to sour cream. Sut the bath with it, let's dry and wash the water.

But keep in mind that bleaching with chlorine can destroy enamel, so it is better not to use them. And for acrylic baths, as we have already written above, this method is exactly not suitable.

Rusty flutters in the bath - a consequence of bad pipes or destroyed enamel. In this case the best way Forget about the problem - eliminate its cause. But there are several home recipes.

Method 1. Summer alcohol + hydrogen peroxide

1. In the glass container, pour 100 ml of ammonia alcohol and 50 ml of hydrogen peroxide. Mix well.
2. With the help of a tissue napkin, apply a solution on a problem space.
3. Wash water in 10-15 minutes.

Method 2. Lemon Juice

1. Singing some lemon juice on rust stain.
2. Leave for 10-15 minutes and rinse with water.

Method 3. Soda

1. Add water into a container with soda until the mixture is obtained, the consistency is similar to the paste.
2. Sponge apply the resulting paste on rust stains.
3. Purit and rinse with water.

How to use household chemicals

If you can't get rid of dirty dolls, use cleaning powders and gels.

1. Read the composition and take into account the type of bath.
2. It is better to use environmentally friendly substances, but they are more expensive.
3. Follow the manufacturer's instructions. For example, sometimes a solution must be flush immediately, sometimes - to hold some time so that the bath has become clean.
4. Some funds have a sharp unpleasant odor. So, to use them, you should be good ventilation.
5. Never clean the bath without gloves.

Indeed, due to the composition of water, salts, rust and late care, a new and clean place for swimming is quickly becoming unsightly and neglected.

The bathroom is a place for personal hygiene of all family members. The microclimate in it can affect human health and well-being.

A small area, limited air circulation and high humidity of this room are favorable conditions for the appearance of mold and bacteria.

Sudden malaise, headaches, allergies and skin diseases - the cause of such well-being is often bathroom, which is not clean.

Types of pollution

To determine how to clean the bath at home, you need to know the main types of contaminants with which you can face in everyday life:

1. Lodges yellow color and stains. The cause of formation is various impurities contained in water (metals salts, chlorine, etc.). It can be removed using a strongly diluted water of hydrochloric acid. (See Read more: How to Clean the Bath from Rust)

Rust. The cause of appearance is an increased content of iron salts and old water pipes. It can be eliminated using a mixture of ammonia and a hydrogen peroxide 2 to 1. Rustful places should be gently wipe, then rinse with water. To remove solar stains, this method is effective: a vinegar dilute with water and add a little salt. The stains with the resulting mixture and wash it off with water.

2. Lime flag. The cause of the occurrence is the content of rigid salts (calcium + magnesium). Can be removed by a turpidar or solvent for oil colors. Mix the sponge and wipe the place of pollution. Remains are riveted with baths with warm water and washing powder.

What is impossible

Choosing than to clean the bath at home, it should be remembered that there are methods that categorically cannot be used to cleanse any type of baths and actions that are undesirable to perform, as they can damage the coating.

• You can not clean with brushes with rigid metal bristles, as they scratch the surface and it can lead to cracks.

• It is impossible to use cleaning compositions with a strong acid or alcohol content (especially for acrylic surfaces), as they corrode the surface.

• Do not allow strong water temperature drops, as it poorly affects the coating.

• It is undesirable for a long time to grind underwear in the bath using a washing powder, so it contains components that can spoil the appearance of the surface.

General rules of care

It is not enough to just know how to clean the bath at home. To any of them, regardless of the material of manufacturing or species, the coating, as long as possible retained a good appearance, you need regular and systematic care.

It includes washing the surface after each visit with warm water. The washed place for the adoption of water procedures is necessary to wipe on a soft and well-absorbent moisture to the cloth.

Cleaning the bathing area with the help of cleaning products is recommended as contamination: enameled cleans once a week, and acrylic times in two weeks. The tool is applied for twenty minutes, after which it is washed and wipe the surface.

How to clean different types of baths?

Baths are several types: made of cast iron, steel, acrylic, plastic. For each there is its own rules of care and incorrectly chosen cleaners may simply damage the coating and bring it into a dissenty look literally for several procedures.

What to brush the cast-iron bath to not damage enamel?

In most old houses (Stalinkins, Khrushchev), it is just cast iron products. Their owners are interested in the question: how to clean the old cast-iron bath at home? Is it possible in principle?

Old cast iron baths were made in contrast to modern technologyThe coating composition contains zirconium salts, the presence of which is the main cause of damage to the upper layer. Long interaction with water leads to the formation of yellow divorces and rust. In order to remove damage data, choose funds should be very responsible.

They should not contain acids, chlorine, as well as abrasive substances.

The enamel surface of new cast iron products is practically not afraid of damage, since it was subjected to burning when high temperatures. For such a surface, cleaners are ideally suitable, which have food soda (for example, Pemiolux, comet, etc.).

If the cast iron product was renovated, then not all cleaning products are suitable. To extend the life of such baths, you should always keep them dry, prevent falling items in them and wipe with a sponge with a household soap after each use.

Cleaning steel baths

Emale coating steel baths can not be cleaned with powder, as it can damage the surface. In addition, it is impossible to use metal brushes and fiberglass sponges. They leave scratches and implant bands.

It is impossible to use cleaners, which contains salt, oxalic acid, alkali, formaldehyde. They corrupt enamel, which will subsequently not restore. Then what to clean the bath to not damage the enamel?

It is best to use the most modern household chemicals in the form of pasta, creams, detergent liquids. Apply them only on persistent contaminants that are not reputable with more gentle ways.

Cleaning baths from acrylic

Acrylic baths require delicate circulation. The main thing for them is the regularity of the departure, which lies in rinsing with warm water and wiping from moisture.

How to clean the acrylic bath at home? Check if the cleaning agent is suitable on a small area. If after 30 minutes there was no defect, it means it fits. Of household chemicals You can purchase special cleaners in the form of a liquid or gel (for example, Sanlin, Panivang, Triton and others).

It is impossible to use solvents, gasoline, acetone, ammonia, drugs with chlorine, abrasive pastes and powders, since they all corrupt acrylic. Acrylic baths require disinfection. You can make it like this: pour water, add a seven-percent chlorine solution and leave for a few minutes, after which the bath is rinsed and wipe.

Folk remedies for bath cleaning

In order to clean the bath at home, it is possible to use not only household chemicals, but also a healthy natural homemade. It is much more pleasant and safer than cleaning "chemistry" from the store.

Here are the most popular of them:

• Food vinegar. It is not only capable of dissolving a lime salt and remove rust, but also kills microbes by 95 percent.

• Powder mustard. It is able to eliminate pollution and disinfect the surface.

• Baking soda. This is a universal cleaning agent. Perfectly removes fat and eliminates an unpleasant smell.

Homemade Money. Very effectively cleanses and whitens plumbing. As with the help of a mixture, clean the bath at home: mix the food and calcined soda in equal proportions obtained by a mixture to wipe the wet surface of the bath, after a quarter of an hour from above, apply a layer of the bleach and moisten it with vinegar, after half an hour everything is rich to rush to water.

What kind folk remedies In which way to use?

For removing different pollution There are your own, most effective for each case of the remedies.

For those who are looking for than to remove rust with a bath, the following recipes will be useful:

• wipe the stains of food soda, leave it for 10 minutes and wash off with water,

• mix the boor with vinegar, moisten the rag and wipe the spot to complete disappearance,

• vinegar helped and mix it with salt, wipe the stain,

• mix salt and turpentine into thick cassea, apply on a stain and rub.

For those who are looking for than laundering a bath from limescale Such tips will be useful:

• dissolve the ammonia alcohol in water, it is 10 minutes to apply on the surface, wash off with water,

• lemon juice apply on the walls of the bath, to withstand 10 minutes, wash off with water,

• mix vinegar and salt, wipe the contaminated surface.

Important!These tips are only suitable for baths with an enamelled surface! If the product is acrylic, then all these methods are not suitable, as well as it is impossible to clean the bath soda. Cleaning such baths can be carried out using vinegar and citric acid as a solution. It is filled with warm water and a half liter of vinegar or an acid solution (7 percent) is added, stirred and left to half, after which water is drained, the bath is rinsed and wipe.

What can be cleaned with a bath at home so that it becomes snow-white?

A new bathing bath and glitter can be returned: to cover the surface with paper napkins, which are pre-mixed with vinegar and leave for several hours, then remove and wash off. If the "bathing" is not new, then a method with a home mixture comes to the rescue (two types of soda + bleach + vinegar). It was reviewed earlier.

In conclusion, it can be concluded that the baths are allowed to be cleaned not only by means of household chemicals stores, but also by people. How to clean the bath at home, each owner chooses himself. The main thing is to take into account the type of bathing and pick up the appropriate means and methods of cleaning, since the wrong selected cleaner can damage the surface, and thus, the mood and lead to additional expenditures.

The bath is often subjected to various contaminants. In addition to untidy external view Plumbing, rust, lime bloom can become a source large number Bacteria, as well as the reason for the appearance of an unpleasant odor. Traces leave children's toys left on sides of shampoos and other means.

Therefore, many owners are interested in how to clean the bath at home. Today, fortunately, household chemical stores can please us with an abundance of various detergents that will not only help wash the dirty bath from the fall, but also remove rust and other pollution.

Before you start looking for a way to help wash the bath to Bela, you need to figure it out. with the cause of the appearance of divorces and other spots.

• Flip from soap. The result of using various shampoos, bathing and ordinary soap The appearance of a film on the surface of the water in the bathroom. It is not always possible to remove it with a simple rinse. This film is entrusted to the surface of the plumbing, and it is impossible to do without detergents.
• Place from lime It is formed from high rigidity water. This is the most common problem for the bathroom.
• Rust Causes tap water with a large iron content in it.
• If the bath is yellow The cause of this was old pipes that are not always well laundered.
• usually accumulates on tile seams between the details, on window slopes, ceiling. This fungus is very dangerous for health, therefore.
• Colored spots They may be a consequence of careless circulation of potassium permanganate, diamond greenery and other substances.
• Pollution from repairs carried out. The bath is very susceptible to different stains, dust sits down on it. Therefore, when conducting repair work It must be protected by film or other materials.

W. old bath Enamel is all in cracks, which easily penetrate any contamination.

Main types of pollution

Clean the bath from rust at home will help the following means.

• Summer. It is applied to stains for a few minutes and wash off with water.
• Lemon juice. The method is the same as with the ammonic alcohol.
• Processing surface cooking salt and table vinegar.

From rust can also be cleaned with a bath with sodium (sodium carbonate). It is sold in any household chemical stores. The procedure will be as follows.

1. Mix two types of soda (calcined and edible) in the same proportions.
2. Add water to obtain a homogeneous cascum-shaped consistency.
3. Sponge or brush evenly distribute the composition on the surface of the product.
4. Table vinegar and bleach in powder granules are also connected in equal amounts.
5. Apply this mixture into soda.
6. Wait 30 minutes and wash well with clean water.

Still with rust copes alcohol and hydrogen peroxide. These components are mixed in the following proportion: one part of the alcohol and two parts of the peroxide. The sponge is loose in the solution and covered with liquid all dirty areas. After 20 minutes, washed with water. Here's how to clean the alcohol and peroxide can rust without leaving her trace.

Lime flag

It is laundered, if you clean the bath soda and vinegar.

• Food soda mix with calcined, apply to the surface of the product, leave for 30 minutes. After that, a little rubbed and washed off with water.
• In vinegar, paper towels are wetted, which close the entire inner surface of the bath. After 5 hours, the towels are cleaned, and the product is washed with water.

What can still wash the bath from the yellow plaque? Causes lemon acid. 100 g of the product is dissolved in 400 ml of water. All yellow sections on the bathroom are covered with this tool with a sponge.

Within two hours, the coating is repeated with a frequency of 10-15 minutes. Then washed well with water. The procedure is quite tedious, but it will great help launder the bath from yellowness.

It is often formed in places where the bathroom adjoins the wall. Its cleaning is possible activated carbon. Coal is mixed with whiteness to cascidular consistency and distribute the composition on the mold fungus. After an hour wash off with water.

Another effective way using soda. How to clean the bath soda from mold? Very simple. It is applied on a problem zone with a rather thick layer, then richly watered with table vinegar. After the end of the reaction, everything is thoroughly washed with water.

Methods for various types of baths

What to wash the acrylic bath?

Acrylic bath requires a neat, careful circulation and the same purification. Care should be regular in rinsing after each use of the product using gentle agents.

It is forbidden to use:

• means, which contains alkali and acid. They are destructive for acrylic;
• alcohol solutions;
• chlorine bleach and other means containing this substance.

Wash the acrylic bath from a lime floor with a weak solution of washing powder. If the surface of the product is not damaged, then this method will perfectly cope with the task.

An acrylic bath at home from rust and other raids washed with table vinegar (which is preheated) and salt. An alternative can be a mixture of the same table salt and turbidar. The same means will help wash the acrylic bath from yellowness.

Since this purification method is rather aggressive before cleaning the acrylic bath them, test it in an invisible site. Otherwise, plumbing can spoil.

Enameled bath has an upper layer, which is rather thin. Therefore, in this case, all methods of coarse cleaning are contraindicated. At home, you can use hydrogen peroxide, ammonia, proven soda and vinegar.

Rust is removed by porridge from water and soda, which is applied to the stain, withstand about one hour and is well wash off with water. Whitens the surface of the calcined soda with the addition of food. The limestrock will remove the ammonia and the juice of fresh lemon.

You can also clean the enameled bath mustard. It will not only wash the pollution, but also efficiently disinfect the surface.

What to wash the old cast-iron bath?

Such plumbing products are characteristic of old houses. The production of cast iron baths was based on adding to the material from which they were made, zirconium salts. It is because of them after contact with water, yellowed spots are formed.

Cast-iron bath from yellowness Wash the cutlery vinegar. Pour full bath Waters and add 200 ml of essence into it. Leave for 3-4 hours, rinse well with water. This universal cleaning fluid has repeatedly reversed the owners in different situations, making ordinary household cleaning better and efficient.

Wash the bath from rust will help good way Based on soda and liquid soap. From these components are preparing a cashis, which rolls rust and its drips.

From strong solar stains will avoid ammonia. It is worth adding to 0.5 glasses of liquid soap and distribute the composition on the surface of the bathroom. After such a procedure, the bath will again become brilliant. If you know how to clean an ancient cast-iron bath, you do not have to change the product to a new one, and it will last another year.

Removal of other types of pollution

The two components are the most common types of dirt in the bathroom. Even weakly concentrated manganese solution will leave dark traces on the surface of the product.

A drop of a solution of diamond greenery will also add paints.

The manganese is washed with a solution from hydrogen peroxide and lemon (or fresh lemon juice), they not only quickly discharge the stains that have appeared, but they will make the bath glitter.

Zelenka remove alcohol. However, if the surface of the plumbing is made of acrylic, the alcohol may be powerless before contamination.

How to wash the bath after repair?

So that it does not have to complete the repair work to deal with its consequences on the evaporator bathroom, the product should be relocated from hitting building materials. If the trouble happened, then you can use next means.

• Wash the bath from paint will help any solvent (for example, White Spirit). It is important to work quickly so that the paint does not have time to absorb into the surface.
• Dusty raid first rinse with warm water, then clean the lemon acid.

What washing sealant from the bath?

The sealant is another type of bathroom pollution. It is used to ensure the reliability of the joints and seams. Sooner or later the question arises ,.

In this case, you can use folk methods using a cook salt, but it is better to buy professional funds specifically for such cases.

How to wash the old bath?

If the bath serves far from the first year, then the pollution appears very quickly. They penetrate all microcracks over time formed on the surface.

Not all cleansing agents can easily return its original appearance. Better, of course, replace the plumbing. But if there is no such possibility, the calcined soda will help. The order of working with it was described above.

Cleaning chrome surfaces

Cranes above the bathroom, shower hoses require no less attention than the sanitary product itself. There, too, a limestone falling and rust appears - the first enemies of the bathrooms. Chrome are covered by mixers, handles on the bathroom and other elements.

With a chrome surface, the universal food soda is cleaned with rust, which is applied to the product. You can also use a table vinegar or tooth powder. All components are evenly distributed over objects with a sponge or soft cloth. It is maintained in such a state of chrome details about half an hour, then wash with water.

There are many ways to query the question than laundering a bath from various contaminants. Follow the above rules and recommendations, and your bath will shine. But it is better not to wait for general cleaning, but to care for the product regularly, then you don't have to spend time and strength to eliminate substantial soothed spots.

If the mother-in-law is watching oblivion, maybe this is not a manifestation of her bad character - look into the bathroom, is everything in order? Bathroom places special cleaning requirements. Often the bath is used not only by direct purpose: we are sometimes erased in it and wash any things, bathing domestic animals. In the bath there are active contaminants associated with daily use, it must comply with hygienic requirements, because in it we wash themselves and bathe children. The question is how to make a bag of white, sharply stands in front of any mistress, even if the weekly visits of the mother-in-law are not threatened.

What is the bathtub from?

Consider the main troubles that are dealing with bathrooms, methods of struggle and the best bathroom cleaning products:

• Conventional contamination. Pollution arising when used - soap raid and dead skin, washed away during washing. This is the easiest type of pollution, in most cases, sufficiently slip after use. Remove dirt while it is fresh, the most lowest way how to clean the bath;
• Soap raid. No matter how strange it sounded, soap, used for washing, itself leaves a difficult task, with which it comes from time to time;
• Lime bloom. If in the area where you live, rigid water, you should be familiar to the problem: lime bloom. By the way, it appears not only on the plumbing, the dishes and household appliances are suffering - washing, dishwashers;
• Rust falls. Increased content Iron in water leads to the appearance of another rust brown spots. Rust also refers to difficult contaminants, requiring special attention when cleaning and complicating constant bathroom care;
• Yellowness. This trouble is associated with worn plumbing systems and also capable of delivering many inconvenience - not every store cleanser for the bath can effectively cope with this type of pollution;

• Fungus and mold.Black-bluished raid at the angles of adjustment to the walls and in the seams ceramic tilewhich is impossible to wash - the colony of mold. Not only is it has a disgusting appearance, it is also dangerous to health. Mold with which most often faced may belong to different typesFor example, to the types of Cladosporium, Ulocladium, Stachybotrys, Alternaria, Penicillium, Phoma, Aspergillus, Chaetomium, Wallemia and others. They have a different degree of pathogenicity. Mold of Alternaria type refers to the 4 pathogenic group and grows perfectly not only on the walls, but also in human lungs. Or Aspergillus - 3 Pathogenic Group, is the cause of the occurrence of people and animals Aspergillos - numerous diseases caused by inhalation of the dispute aspergillus mold. Fighting a molds - no longer a matter of beauty bathroom, it is a struggle for the health and safety of your loved ones - in addition to cleaning, disinfection is needed;
• Old bath. Bath with old, damaged coating, separate a big problem. Question how to clean old bath, most often worries many owners;
• Bathroom after repair. It would be better, of course, at the time of repairing the bath to securely hide, but anything happens, and sometimes the surface is placed by building compositions, there is a problem than laundering a bath after repair. It depends on how the builders were stained;
• Spilled coloring substances. Even the most neat person sometimes sheds anything, having a persistent coloring effect. Knowledge, like laundering a manganese with a bath, remove the greenhead, wash off the hair paint drops, or a different painting matter, will not be superfluous.

Removing contaminants of various nature of origin requires the use of various bathroom cleaning products. A variety of materials from which are manufactured modern baths, more complicates this task. Let's try to understand the intricacies of such a procedure as cleaning the bath at home.

Cleaning ordinary contaminants

In the arsenal of any mistress should be a cleaning agent for the bath. Which of the proposed modern household chemicals of the products is the best cleaning agent for the bathroom, we will not discuss, because it is a matter of habit, financial opportunities and advertising performance.

If the bath is new, to simplify life and save the coating for a long time, take care of the surface regularly using the usual bath wash. Pollution after use is easy to rinse using detergents Or bath cleaning gel. The method of use of the means for thorough cleaning is almost the same:

• moisten the surface with water;
• apply a means using a soft sponge;
• wash off with plenty of water;

Important: Please note that the selected tool for your bath does not contain potent acids. Chemical composition care products are especially important if you have acrylic bath, from artificial or natural stone. Yes, and modern cast iron with enamelled coating are no longer the ones who have been familiar to our mothers: enamel on them is thinner and tender than on old ones.

Removing soap plaque

Repeat again - regular care for plumbing requires less physical forces, money for daily bath cleaning, and does not require heavy chemical artillery interference, which is an effective bath for cleaning the bath, but along with pollution can also be covered with a beautiful coating. Soap foam in combination with rigid lime water, topped on the surface, forms a complicated solid raid.

The easiest way to wash the sink or bath is not to give foam to dry and petrolle, wash off foam flakes with water. The method of prophylactic struggle with the appearance of soap plates is the use of liquid soap wash. Talc is added to the solid soap, it is he who sends on the walls. And suffers from the plaque not only a bath, but also tile On the walls, chrome surface of mixers, sink and other surfaces.

How to remove a solid soap fleece from walls and mixers than laundering a bathroom and what to clean the sink? There are special baths for cleaning baths from soap stone if you want to know how to clean the bath without chemistry, there are folk ways. Although, of course, citric acid, soda, vinegar, salt is also chemistry. But many, choosing what agent is better to clean the bath, prefer to do without products from the household chemical department.

Tip: The simplest means to clean the bath at home from soap plaque - lemon juice. Take natural lemon juice, squeezed from lemon, or dissolve citric acid in a glass of warm water, natural juice dilute with water 1: 1. The lemon juice solution can be placed in the sprayer or apply a soft sponge to the surface, leave for a while, and wash off with warm water.

This method will help not only cope with the molded soap, but also solve the problem than to clean the bath to glisten.

Cleaning the lime

If the water is rigid, inevitably the appearance of a solid lime deputy. One of the ways to combat it is to install pre-cleaning filters with a water softening cartridge. This will reduce the rate of formation of limestone stalactites on the surface of the bath and sink, on the walls of household appliances and electric kettle.

If the lime flaka is still formed to clean it, you can use a ready-made cleaning store, cleansing from lime, or apply a homemade tool. Good tool To clean the contaminated bath is a mixture of soda, vinegar and liquid dishwashing agents. Take 1/2 cup of food soda and mix with 1/2 cup of liquid detergent, add a glass of vinegar from 1/4.

The resulting mixture is applied to a contaminated surface, leave for a while and rinse with water. To clean the tender surface of acrylic, you should not use soda: it is although soft, but still abrasive. Clear lime S. acrylic surface It is possible either with lemon juice, as described above, or a mixture of ammonic alcohol and hydrogen peroxide taken in equal proportions.

Rusty sublifts

To combat the appearance of rust spots, it is also better to use funds that prevent their appearance: pre-cleaning filters and serviceable mixers. If the question is what kind of bathroom cleaning from rust is better to apply, it is relevant for you, then choosing something to clean the baths from rust spots, pay attention to such representatives of household chemicals as "Surge" and "CIF". They are fairly easy to cope with the subteps rust. As in all cases of household pollution, there are ways "from kitchen cabinet and first aid kits ", allowing to achieve an excellent result. These are already known, soda and citric acid or vinegar.

Tip: For cleaning acrylic or stone bath, you can apply mustard. Use homemade, without preservatives. Fresh, strong mustard apply a thick layer on rust stain and leave for 9-10 hours. After the expiration of the specified time, moisten the mustard layer with warm water and scroll through the surface, wash the water.

We fight yellow divorces

The reason for the appearance of yellow lifters is old water pipes. What washing the bath in this case? The best way is to eliminate the cause, not the struggle with the investigation. BUT best tool To clean the bath from the yellow-eyed - dry bleach, diluted with water to the state of the casis. The mixture is applied to a stain and leave up to dry, wash the water. You can apply more harsh methods. In economic stores, a solution of hydrochloric acid is sold. Pour the acid on the soft cotton fabric and wipe the stain.

Remember! Working with hydrochloric acid is needed extremely carefully, use rubber gloves. It is necessary to protect the chrome surfaces on the bath itself and the mixer. Chlorine-containing substances cannot be cleaned acrylic and natural stone.

What to do when black bloom appeared in the corners?

Black plaque, growing in the corners on the walls and the edge of the bath - this is mold. It is useless to keep the surface struggle, and use means for disinfection. Mold - fungus, besides the top, visible part, there is a mushroom, mycelium that can penetrate deep into the surface finishing materials. Most often mold affects not the surface of the bath, and the locations of the joints: between the side of the bath with a wall, tile seams. If the mold settled in your bathroom, perhaps you should think about the repair, or at least, updating surfaces where she found a place and ventilation device.

Remove the old sealant from the seams, you should also clear the tile seams, removing the old grout. Restart seams tiles with a new grout, in drying, cover special tool, preventing the appearance of fungus, for example, Kiilto Clean. Using silicone sealant, Choose a product that is protected from mold. And most importantly - do supply-exhaust ventilationwhich will protect your home from the appearance of mold;

Old bath with damaged surface

How to clean the bathroom with noticeable damage? The bath, which served the service life, has all the above contamination. Cleaning is complicated by damaged rough surface absorbing as a sponge, dirt. Given that laundering the old bath is difficult, it is no less difficult to maintain even regular care in a clean state, the best way will change it.

To note: if from saving funds, you are thinking about updating the old bath with the application of a new coating, no significant savings work, - high-quality funds are expensive, their price is comparable to the cost of a new simple cast iron bath. No way of expressing surface updates at home is compared with the strength of the enamel layer applied in the factory conditions.

If the replacement time of the bathroom has not yet come, the way, how to wash the old bath, exists. To do this, you will need, except for food soda, calcined. Soda, as opposed to food, is stronger alkali, with pH 11. The calcined soda is sold in the household chemicals departments, it is possible to find it in the shell powder section. By the way, she softens hard water well.

Displays food and calcined soda in a ratio of 1: 1, you can dilute to the state of the casher with water for the convenience of applying. With the help of the brush, apply a mixture on the surface of the bath. Do not be afraid to make significant efforts: this is not acrylic bathAnd for the rough enamel of the old bath it will not be worse. Leave the applied composition for 10 minutes.

Prepare a mixture of vinegar and powder bleach, taken in equal parts, and, without flushing the previous detergent soda, apply a mixture with vinegar. Thirty minutes, wash off with plenty of water. This method, as a bath to make white, is effective, but may need to repeat the process again, depending on the degree of damage and pollution of the bath. But it is worth keeping in mind that damaged enamel will soon require cleaning again.

We remove traces of repair

So, how and what to clean the bath after repair? Try to close the bowl at the time of even the smallest repair work, then the means for your bathroom will not need, because some building formulations are simply not mounted from surfaces, for laundering others may require special solvents that, together with construction pollution, can dissolve and spoil and surface.

And some building materials themselves are in addition to pollution, also substances that damaging the surface of enamel, acrylic, stone. In order not to think about how to clean the bath from the paint, try to immediately erase the paint drop while it is fresh. Traces of lime mortar are removed using means, such as Duty Extra - means for removing solutions. But it should be extremely careful to use it for cleaning the surface of the bath;

How to remove traces of different coloring substances

Permanganate potassium, or manganese, leaves behind a resistant brown raid, which is difficult to wash even from the glass. For understanding how to clean the bath from mangartage, elementary knowledge of chemistry will be required. Brown oxide MnO₂ is oxidized to a colorless Mn₂ solution of hydrogen peroxide and acid, for example, already tested, lemon.

Than laundering a bath from the spilled greenfish, it is not particularly thinking. Fresh stain can be removed with alcohol, if it is not a bath from acrylic. And over time, with ordinary use and washing, the spot will come down.

Conclusion

The snow-white bath at home is not a luxury, but the necessary key to really hygiene procedures carried out in it. And the answer to the question, the better to wash the bath, depends on what your bath is fan. In the choice of funds are guided by our advice and customer reviews. Although, as it turned out, soda and citric acid will help to clean the bath at home from most contaminants.