How to cut a glass jar at home. How to cut a glass bottle with ordinary thread? Easy and fast! Procedure for cutting thread

Round glass can serve not only with a liquid vessel, but also a source of inspiration. With the ability to cut glass bottles and banks, you can make many stunning things. Starting from glasses and ashes, and ending with lamps and designer blades, the number of crafts from recycling is limited only by flight of fantasy. It's amazing how original and beautiful things can get from almost free material. The main thing is to create this desire, and we will tell about the process itself in this article.

Types of glass cutters for bottles

To date, there are many finished fixtures for cutting glass cans and bottles. All of them have a different design, but by type of action only in two groups are divided: cutting and heating. General principle Both groups remain single - the bottle is fixed in a horizontal position and rotates around the glass cutter or heating element. The principle of operation of devices is rather similar, however, has some features.

Roller glass cutter for bottles has simple design And widely applied by amateurs of homemade. It can be assembled with their own hands from the girlfriend. The cost of the finished device varies from several hundred to the pair of thousand rubles. The cut line is quite smooth, but the edges require grinding. The optimal option for homemasses.

Bottling with a heating element has a more complex mechanism, but also higher quality cut. The device works from the mains or battery. You can collect such, if there are special knowledge, but at your own risk and risk. Finished devices cost several thousand rubles and are unlikely to interest most of the population. Suitable for creative workshops or designers.

Glass cutter for bottles with their own hands

Spending money on the purchase of glass cutters for bottles is not at all. This device is very simple, and in the presence of certain details and desires, it can be made with your own hands. Below we give step-by-step photo instruction By assembling a convenient and practical cutter. Perhaps some details will have to buy, but they cost a penny and sold on any market or in a construction store.

Required materials:

• Wooden base: 25 x 14 x 2
• Side bar: 25 x 4 x 2
• Facial Bar (limiter): 11 x 4 x 2
• Wooden rail: 25 x 1 x 2
• Roll-out rollers: 4 pieces with a maximum diameter of 4 cm (preferably non-reflective with rubber coating)
• Cable Channel: 25x2 (with minimal thickness)
• Roller glass
• Some Glasses of PVA and the handful of selflessness

Build device
We will begin with the most difficult and jewelry stage of the work - assembling the cutting mechanism. We take a wooden rail of 25 x 1 x 2 and saw two segments from it, 3 cm long in the resulting woods, carefully make through longitudinal holes. They will serve as a groove to install a hinge, which will walk the guide with glass cutter.

From the same rail, cut off another piece, a long 9-10 cm, and we have all the details as in the photo below. Cable Cable Cover Cut the length equal to the size of three wooden parts (2 segments of 3 cm and rail widths - 2 cm), about 8 centimeters.

At the next stage, fasten the cutter on the guide. To do this, at the end of the rail, it is better to make a small deepening, which will serve as a kind of fiber-cutter limiter.

So that the wood has not cracked when spinning self-reserves, at the point of attachment, you should make a hole in advance by the drill of a smaller diameter.

If on your self-tapping screw, like on a photo cutter, there are notches for pumping glass, then for the attachment you can use them. If there are no grooves, or they are located on the cutting roller, it is better to drill the fastening hole in the metal head. In general, the main thing is that the glass cutter is installed as in the photo.

After fixing the cutter, it's time to collect the design together. To do this, we screw two bar 3 cm around the edges of the cable cable cover. In advance prepared grooves in bars, twist the screws-hinges, long no more than 4 centimeters (long can be trimmed). At the bottom of the guide rail, drill through a hole, install it between the bars and fix the screws. To rake could rise, its lower angle should be smoothed by treating sandpaper or file. We look at the photo and repeat.

Having finished with the design of the cutting mechanism, you can move to the assembly of the working platform of the future bottling.
The first thing is fastened to the base of the lateral bar 25 x 4 x 2. It is possible to connect these parts using self-tapping screws by screwing them on the reverse side of the base. You can also use PVA glue or epoxy resin.

When the lateral part is fixed, you can move to the setting of the rolls. The first pair of wheels is set at a distance of 3-4 cm from the top edge of the base. The next pair is located 12 cm down. For more elongated bottles, you can prepare another set of holes, 5 cm below the second pair of rollers. Pay attention to the photo.

The final stage of the assembly will be fastening the bottom of the cable channel to the edge of the sideboard, and planting the end limiter on the self-tapping screw or glue.

Light movement hand attach the cover with a cable-channel cutter and the device is ready to use!

Another way to fasten the glass cutter.

How to cut a bottle without glazing

Compact bottles - the device is very convenient, but it is done for frequent use. What to do those for whom this procedure is single and not repeat in the next decade. Buy ready device expensive, and collect long and not the fact that it turns out how it is necessary. As you already understood, now we will talk about how to cut a bottle at home without glazing.

This method of processing glass is based on heating with sharp cooling. For a sharp change of temperature, we need a meter of a wool thread, a combustible liquid (aciton, gasoline, kerosene, alcohol), a large container with icewater And, in fact, the bottle. Prepare all the components, you can proceed.

Woolen thread dip in the container with a flammable liquid so that it is completely soaked, and wind the thin line into the place of the future chip. Next, we set fire to the thread and wait for its complete exercise. During burning the bottle, keep horizontally, and constantly rotate so that the fire is evenly heated with the whole line. As soon as the flame is walked, immediately immerse the bottle into the prepared container with water. After a couple of three seconds, the characteristic sound of the leap-free glass will be distributed, signing on the successful separation of the bottle. If there was no click for 5 seconds, you can make a small effort and try to break.

The methodology can be successfully applied to the controlled chipping of most types of glass containers, but sometimes there are exceptions. The effectiveness of the temperature difference, largely depends on the strength of the glass.

For those who want to see on a more visual example, how to cut a glass bottle at home without glazing, we recommend to see the next video.

Save this page in your social. Networks and come back to it at a convenient time.

In skillful hands, even the usual bottle turns into a piece of design art. Human fantasy can turn bottles in original interior items, useful decorations for cottages and at home. And some craftsmen use glass containers as building material.

Cut the bottle? Easily!

Sometimes there is a question about the bottle. An ordinary thread, glass cutter, a file, a grinder - a lot of options. And they all require skills and compliance with safety.

At home, it is possible to use a relatively simple way for which thick threads will be needed, combustible liquid (cologne, alcohol, solvent, etc.), a pelvis with cold water and a bottle directly. Before cutting a glass bottle with ordinary thread, you need to thoroughly wash the bottle. You also need to remove stickers. Threads can be used ordinary woolen, it is desirable to choose yarn thoroughly. Measure the length so that it is enough for 5-6 turns. Cropped thread Soak in a small amount, it should be so good to soak, but it should not flush an extra liquid.

In the expected location of the cut, wet the thread so that it fits tightly to the glass. Set fire Bottle to keep parallel to the floor, turning it several times so that the glass warming is evenly. Wait until the thread of project - and immediately omit the bottle in the pelvis with large quantity Cold water. If the experiment has passed successfully, then the characteristic sound of cracking glass will be heard. Perhaps you will have to make efforts to abandon not sealing areas. As a result, two halves will be obtained, the edges of which need to be ground with sandpaper or grinding stone. That's all.

Knowing how to cut a glass bottle with ordinary thread, you can revive the interior - make various crafts for decoration. From the bottom unit you can make original glasses, vases or porridge for flowers. Upper halves to put on the manufacture of lamps, candlesticks and other creative things.

Application of glass bottles in the interior

Modern manufacturers offer their products in an attractive container. Sometimes the hand does not rise to throw a bottle of bizarre. Such a container can be safely used for crafts. will tell fantasy. Transparent bottles can be filled with various croups, sprinkling them with layers or color sand. You can fold in the container beautiful flowers and pour them with a solution of glycerol. This method allows for a long time to save gentle buds and decorate the interior.

Bottles can be wrapped with a twine or colored threads and attach decorative elements. On the glass you can make a painting using or apply the decoupage technique. Options for using glass containers Mass, the main thing is to include fantasy.

Glass bottles on a household plot

Dacha or pricework - Roll for skillful hands. If the house accumulates a large number of Glass containers, then you can arrange a flowerbed or garden tracks. By the way, rainwater does not accumulate the wicket or entrance, they advise to wear a few bottles of the neck into the ground.

The craftsmen use bottles for the construction of fences, arbor and greenhouses. To fasten such an amazing building material. cement mortar, and the laying technology is similar to laying stones or bricks during construction.

Glass packaging can clog environment And be traumatic. The skillful use of this material allows not only to decorate the interior or a plot, but also helps protect nature. Knowing how to cut a glass bottle with ordinary thread or apply it entirely, you can contribute to environmental protection.

There are several simple ways how to crop the neck of a glass bottle. You ask, why do you need it? From a beautiful circumcised bottle, a cool glass can be made, a vase for colors or a stand for different little things. But, before proceeding with the cutting of beautiful bottles, I still recommend to practice on ordinary beers, as you need experience and some skill in this matter: exactly it does not always work the first time.

So, I will tell the most simple ways Cut the neck from a glass bottle.

Method 1 - Use glass cutter

It takes glass cutter. You can use the factory model or make yourself. Design homemade device Maybe different: the main thing is that the bottle and the cutting element are securely fixed, but the bottle is freely rotated.

Important! With a slit, you need to do one passage: it will provide the most smooth edge.
Next, you need to prepare hot (boiling water) and cold (you can with ice) water. On the line of cutting shed first hot waterSo that the glass is well warmed.

After that, we just jump on a bottle with cold water.

From the temperature cut, the glass should be broken down along the pre-cut line. If this did not happen, the procedure must be repeated (hollow first hot and then cold water).

Method 2 - Flame Candle

For this method, the candle and a piece of ice will be required (you can use a container with very cold water). To split the neck, on the bottle, the marker is carried out with a flat line, according to which the glass is well warmed over the candle.

Then the cut line is cooled with ice, after which the glass splits with a slight tapping.

Method 3 - Nargev from friction

Another way to split the bottle of tinsel is to use the heating of the glass due to the friction force. For this, two plastic ties that serve as limiters are put on the bottle. There are three turns of twine between them, after which the twine for loose ends begins to move forward / backward.

After 2-3 minutes, when the glass is sufficient, the bottle is placed in cold water, and with a slight tapping, it turns off along the heating line.

If there is a small incision before friction on the bottle with glass cutter, it is not necessary to use cold water: the glass will crack when heated independently.

Method 4 - Installation with Pokal Thread

For this method, a transformer will be required, for example, with a microwave oven with a secondary winding, instead of which three power cable turns are installed.
The free ends of the wire closes through a thick wire. Stand (base) should be heat-resistant and dielectric.

The next step is to connect the transformer to the electrical network. When the transformer is turned on, the thread is increasing: a bottle is applied to it and gradually rotates. When warming up the glass of the neck along the warming line is disconnected, so it is necessary to ensure that the heating is uniform and one line.

Method 5 - Burning Rope

For this method, natural twine and a bit of purified gasoline for lighters will be required. A piece of beeps is cut down the length required for turnover around the bottle at least 3 times. Then this segment of the twine is soaked in gasoline so that it is completely soaked.

Washed in gasoline, the twine is wound on the bottle in the place where it is necessary to produce chips and ignite.

When gasoline is almost fascinated, the bottle is lowered into cold water, where the glass is bursting along the heating line from the temperature difference.

Method 6 - We use specialized equipment

This method is to use the tile cutting machine. Diamond disk is good and smoothly cuts thick glass. It is recommended to work in gloves, protective mask and glasses, as glass dust is very dangerous. The advantage of using a cutter is the ability to cut a bottle into small washers, which is not available at other ways.

Everyone is well known that going to the tourist campaign (hiking, water, equestrian) on unclosed places, we will definitely forget to take some important trifle with you, but ... I will definitely get lost in the forest. But it is also well known that for our tourist it is not a reason for despondency. Because in such cases it is almost always helped -

Here, let's say you took with you a very sufficient stock of glass bottles with different contents, but forgot to capture mugs and glasses. And even glasses did not take! A civilized Western tourist would consider that the event is hopelessly spoiled and necessary to return. But not you, because you are our tourist, and have no doubt: something from the field of manual craft will save you. Carefully looking at the empty bottle, which you hold for the middle part, you notice that the bottom of the bottle has a shape of a glass, and the upper part is the form of a tipped wineglass. And everything, the problem is solved! Further - the case of technology: it remains only to cut the bottle in the middle. It is clear that the glass cutter is not taken to the campaign, but you remember you have seen when it is focus with cutting a glass bottle thread. And the focus was as follows. The bottle was tied with a thread, moistened kerosene, the thread was settled, and when she traveled, the bottle was dragging sharply into the cold water. Here she crashed just along the line of burning thread, and only remained gently separating the halves of the bottle.

And so, the disclosure of the focus - Cutting bottle (From the heading "Hand crafts")

Not a bag, we are getting started. We start with training essential materials and tools. It:

- Glass bottle;

- long strong thread;

- kerosene or lighter fluid (or other combustible liquid);

- a basin with cold water (or a reservoir, on the shore of which you have arranged the halt);

- matches or lighter;

- tablespoon for tapping on a bottle;

- protective glasses;

- Brick or stone with a rough surface to remove sharp jar on the cut (very good, if a small file was rarely in the bushes, grilling bar or sandpaper - zero).

Then go to K. main procedure .

1. Cutting off the thread of the desired length (2-3 turns around the bottle plus the node zagging), soak it a couple of minutes in a fuel liquid.

2. Very neat, trying not to smear the fuel liquid on the glass outside the cut line, tightly tie the thread in 2-3 turns around the bottle along the planted cut slicer. At the same time, make sure that the strip from the threads is minimal width, and that the node also has a minimum size. This will provide a smooth edge of the cut.

3. Wear safety glasses. Holding a bottle horizontally over a basin or over the surface of the reservoir at a safe distance from the face, set fire to a thread and slowly turn the bottle around its axis. It is that the thread burns as soon as possible along the entire circumference. You give a thread to figure out completely - until it is burning entirely by itself.

4. Then immediately dip the bottle entirely into the cold water, while holding it with his hands for the bottom and for the neck. As a result of a sharp change of temperature, the glass will crack exactly along the thread combustion line (which is why the thread layer on the bottle should be narrow).

5. If the glass has not been broken by itself, then you are working part of a spoon (which from the mouth side) carefully clutch along the glass cracking line (the spoon should be at hand to do not miss the moment). After that, the bottle is divided into a glass and a glass.

6. Smoothing all sorts of protrusions at the edges of the cropped parts with brick, a file, etc. Of course, you do it in the water, so that small pieces of glass and bricks are not spilled in the wind, going into the eyes. At least glass should be wet enough. Having finished the grinding of the edges, you get a wonderful glass and a pretty glass. Just do not forget to shut the bottom of the bottom of the glass (that is, the neck of the former bottle).

7. Hand crafts using fire suggest compliance with fire safety requirements. Therefore, make sure before the above procedure described that you have everything you need in case of a small fire. You have the water at hand, it remains to have any kind of dense bedspread. And, more importantly, you are starting to surgery only after it is completely squeezing, otherwise you can neglect fire safety and burn something necessary.

When you learn how to hardly cut a glass bottle of thread, you can use this skill for the manufacture of other hand crafts from bottles for housing decoration. It can be a flower vase, table lamp, Fuuder for champagne. At home, for grinding a cut line, you will have even a file with a diamond coating, not to mention the shallow emery paper. You can cut the bottle not only in parallel to the bottom, but also at any angle. The cut line can be pre-draw using an elastic band for money and a marker.

Useful articles

Hello, dear readers! Decor made of glass bottles, quite popular lately, by the way, we have already considered this topic in the review "", and since many are interested in the question of how to cut a glass bottle at home, without glazing applications, then today's master class I want to devote Simply, but interesting way to split bottle thread ...

In this connection, the topic of this master class "How to cut a bottle of thread - nothing complicated!".

To work, we will need:

1. Glass bottle;
2. Woolen threads;
3. Solvent (can be kerosene, alcohol, cologne, acetone);
4. Scissors or stationery knife;
5. Gloves (remove the skin of the hands from the effects of the solvent);
6. Lighter or matches;
7. To protect the eyes just in case, glasses (in fact there are no fragments, but caution is not excess);
8. Deep basin filled with cold water.

So how to cut a bottle with a thread? We take a woolen thread, measure and cut it off in such a way as it was enough for 3-4 bottle turns.

Immerse the extinted and cut-off thread into the solvent, and immediately wind the bottle, in the place where the "inclination" is planned. You can simply wash the thread or tie a nodule, in this master class I simply made a winding.

After that, this thread is set in with matches or lighter, and the bottle is better to keep in the inclined position - strictly horizontally (parallel to the ground), neatly scrolling around the axis.

The fire will burn approximately 30-40 seconds, as soon as the burning thread will go out - quickly lower the bottle in the prepared basin filled with cold water.

Next, the characteristic sound of the cracked glass will be heard, and the bottle is instantly divided into two parts. This type of glass cutting is based on a rapid change of temperatures, we all know from the lessons of physics, that when the glass is heated, the glass is expanding, respectively, with a sharp change of temperatures, a kind of glass destruction occurs and it is simply cracking!