Glue moment how to glue shoes. Shoe glue: what to choose and how to use it? Necessary materials and tools

Lovers independently repair their products need to be clearly known, what to glue shoes. However, after such an amateur time, it sometimes has to bear the thing to the shoemaker so that he will correctly repaired.

Glue, which should not be used to repair shoes:
- PVA glue, which is useless to use, even to glue the simplest details of shoes, such as lining. As is known, water is based on the basis of glue, and since products are subject to constant water impact, all the parts glued by this means will quickly be dismissed.

Super - glue purchased in a construction store. Do not trust the inscriptions on the tube, claiming that glue bonds all, including shoes. This tool is suitable only for construction work. Gaming their favorite couple to them, you risks hopelessly spoil it.

Super - glue "moment" which has positive qualitiesBut it has a destructive effect on shoes: the mark is cracking and the material is bursting, because after solving the glue becomes "glass". To correct the flaws caused by the product after repair at home with such glue, shoes will have to work a lot. So what to glue shoes better?

Choosing a suitable shoe glue

Excellent option - glue of imported production (manufacturers - Poland or Italy). For homework, it is better to purchase a small volume packaging, since the glue dries away if it does not use for a long time.

Practically transparent glue "Diamol" bonds almost all product details. The yellowish glue "Nairit" is more profitable to apply for skin fastening. For cloaking products, shoemakers are used by such funds. When gluing, it is necessary to clearly adhere to the rules of instructions, as well as the characteristics of each material. First, the fastened surfaces need to be thoroughly washed out, clean the sandpaper, degrease the acetone, and then apply a uniform layer of glue. After 15 minutes, it is reheated by a re-layer of the means and gripped the fastened parts strongly. So that the surfaces are firmly connected, you need to touch the missed shoes throughout the day.

For less responsible and auxiliary works (for example, glue, made of natural rubber, suitable for the gluing of the stelek). This agent has a sufficiently low attachment ability. To ensure more reliable bonding strength, polyurethane glue is suitable. It is most often used when fastening the details of the shoe with a polyurethane coating.
Correctly applying universal shoe glue, you can extend the life of the product.

Regardless of how high-quality and expensive shoes you acquire, sooner or later it wear out, and sometimes even rushing. Most people in this case resort to the help of a specialist. Some prefer to save on repair and solve the problem on their own. About 80% of all modern shoes are performed using adhesive compositions. In the repair, also use glue, which almost completely suppressed the threads and cloves. Professionals say that currently adhesive means the best way Provide reliable and strong clutch. What shoe glue is the best, to say unequivocally difficult. It depends on the type of product and the specific task.

Having experience, choose the appropriate shoe glue is impossible. Experts recommend to resort to help product only known brands. We list what advantages should have adhesives:

• reliability and durability;
• water resistance;
• frost resistance;
• the thickness of the bonding elements should not strongly affect the clutch fortress;
• lack of rigidity;
• preservation of the integrity of bonding materials;
• elasticity of seams.

Possessing these parameters, the glue will effectively cope with its task. Of the whole variety of adhesive substances available on sale, we allocated the highest quality and reliable. We helped us in this reviews of real users.

Top 10 best adhesives for shoes

10 Contact

Best price
Country: Russia (produced in China)
Average price: 37 rubles.
Rating (2019): 4.6

More than 10 years ago, the domestic company RESEL has developed excellent shoe glue. In 2002, only instant adhesives were represented in 2002, however, in 2008, contact and epoxy adhesives were received. To date, contact is the second market in the market by the number of sales, yielding only to the moment. At the same time, the first price is much lower than the second.
Contact is suitable for gluing skin, rubber, ceramics, porcelain and many other materials. They can very well repair shoes. The glue perfectly fills the cracks and clearances. Contact 100% performs its functions. When implementing all the recommendations specified on the package, the substance is "tightly". Buyers respond about it only from the positive side.

9 Eva

Economical flow
Country: Taiwan
The average price: 100 rubles.
Rating (2019): 4.6

Glue for EVA shoes completely justifies the characteristics declared by the manufacturer. Therefore, it deserves a place in our ranking. Consumers cannot find any drawback. The glue "tightly" sticks and corner, side cuts and breaks on bending. It holds on the shoes for a very long time, while maintaining a damaged area from repeated damage.
Eva is waterproof. The sun does not flow. Even oblique cuts sticks to "Hurray". Moreover, the place of cut after the glue treatment is almost not noticeable. Buyers recommend "EVA" as best gluewhich perfectly copes with its task, spent economically and is inexpensive. The shelf life is 2 years.

8 second

The most popular glue
Country: China
Average price: 85 rub.
Rating (2019): 4.7

One of the most bought and best tools For shoe gluing. Instantly "grabs" the desired parts of the surface. The glue will not leave stains and dry quickly. Shoe repair masters are actively recommended for use second. After applying, shoes can be worn under various conditions, without fear of new damage. The agent is resistant to alkali, fat and moisture. It consists of polyurethane, acetone, methyl ethyl ketone and various additives. It has helium consistency and transparent color.

The tube is small and convenient, users mark easy use and rapid action. In addition, the funny price suits all buyers. Second will firmly start the sole for a long time. Efficiency and universality of glue pleases buyers. After complete frost, the agent does not have a smell or color. It can also be used in various household tasks: glue the elements of the interior or implement creative ideas. Despite all the above pluses, second has negative sides - non-economic use and characteristic smell.

7 Moment Marathon

Fast bonding
Country: Ireland
Average price: 149 rub.
Rating (2019): 4.7

Henkel manufactured glue gel, specially designed for shoes. His main advantages is effectiveness, economical consumption and ease of use. The gluing process occurs fairly quickly, which saves time. The tube contains only 3 grams of substance, however, it is enough for a long time.
Glue is waterproof and elastic, it also has high strength. Thanks to the consistency, does not flow. This causes usability. Special thin spout allows you to apply glue with accuracy to those areas where repair is required, and easily control the dosage. User feedback indicate good quality "moment." They suggest that glue is perfectly coping with not only with the repair of shoes, but also with other repairs of leather products.

6 donedeal

Perfectly gluits heterogeneous surfaces
Country: USA
Average price: 185 rub.
Rating (2019): 4.8

Glue, which will suit almost all materials. With it, you can make inflatable mattresses, boats, tourist equipment, shoes, sports equipment and more. It connects things of heterogeneous origin - rubber with metal, plastic with wood, glass with leather. The tool makes the temperature dropper and reliably holds at low and high indicators - from -45 to +105 degrees. The sealant best glues the sole or the top of the boot. A durable connection will allow you to wear shoes not one season.

Apply glue should be on both surfaces. Then he quickly and reliably "grab". Mandatory condition is a thin layer. Within 24 hours, the consistency completely hardened and dry out. Accelerate the process will help heating glue to a temperature of 70-80 degrees. Customer reviews are mostly positive. Mark a comfortable tube and easy use. In the column of shortcomings, you can find comments on a shark smell.

5 Uhu Schuh & Leder

The durability of glue seams
Country: Germany
The average price: 167 rubles.
Rating (2019): 4.8

A reliable tool intended for gluing solid and soft materials. After applying, it dries quickly. One of the most significant advantages is the resistance of glue to moisture. In case of water, it will not soften and will not lose its basic properties. Apply it most often for shoes. Uhu Schuh & Leder does not succeed for a long time and durables, even with extremely high temperature indicators - up to +125 degrees.

The main rules before applied: it is necessary that the shoes are clean and dry. Apply it is recommended to apply a thin layer if necessary, several times, not a marvelous film is formed. Users noted that glue does not leave unwanted spots. In addition, it is well holding a glued surface of paper, leather and others. In addition to all the listed pluses, the tool has some shortcomings that can be detected in the reviews. The minuses include not the most comfortable tube, as well as a sharp smell of glue.

4 desmocol

High reliability
Country Russia
The average price: 175 rubles.
Rating (2019): 4.8

Shoe glue, which is praised for quality and reliability. Based on the composition of polyurethane resins. Due to this, it quickly connects the surfaces of various materials and firmly holds them for a long period of time. Desmocol is subject to even solid parts of the shoes. Often, it is used to take the top of the boot or sole. Also, the remedy is suitable for plastics, metal or glass. It has water-repellent properties and plasticity.

Before use, it is necessary to prepare a product for applying. It is recommended to clean the shoes from contaminants, remove the remains of the old dried glue and degrease the desired part of the surface. It is very important to apply a tool with a thin layer and wait about 10 minutes before drying. If necessary, the procedure should be repeated until the film is formulated. Additional compression glue does not require sufficiently connect the desired parts. Buyers remain satisfied with the acquisition and willingly advise this glue. The minuses include only an unpleasant smell.

3 NIRITI 1 (88-P1)

Best strength
Country Russia
Average price: 299 rub.
Rating (2019): 4.9

One of the best adhesives for shoes is Nairit. Numerous customer reviews are told about its effectiveness. Thanks to a wide range of compounded materials, you can use in different household spheres. Clutch strength depends on the work technology and the specifics of the material.

In the course of work, Naire forms a waterproof, elastic seam of high strength. If you need to process a large area - the adhesive of the NIRITI is an indispensable assistant, since the layer applied to them remains ramping for a long time. The substance is safe to use. It does not contain any drug solvents, such as toluene. We can handle the whole materials in any combination. It can be leather, rubber, and cloth, and wood and much more. Blooding methods - hot and cold. With the first version, the product can be used already after 4 hours, during the second - after a day.

2 Polyurethane Seam Grip

Quickly dries. Belt reliably
Country: USA
The average price: 780 rubles.
Rating (2019): 4.9

Universal glue, which is used mainly to glue the skin, rubber, fiberglass, and also suitable for repairing shoes. After use, the agent will quickly dry and becomes elastic, which allows him not cracking and not to diverge. For uniform application, it is recommended to use a brush. You should usually leave the product to dry at a time from 12 hours. Then it firmly glues the necessary details.

This agent has deserved many positive comments in the reviews. This is due to the fact that it performs its function qualitatively and is easily applied. Seam Grip will allow you to take a damaged worn out sole and return the presentable shoes appearance. Adhesive glue, after drying, you can safely walk in the rain and not be afraid of the appearance of new damage. Shoe repair masters are actively recommended for the acquisition of Seam Grip. The only thing to scare can be a high price.

1 Kenda Farben SAR 30E

Best quality
Country: Italy
The average price: 500 rubles.
Rating (2019): 5.0

Italian manufacturers have developed the highest quality glue. Today it is applied in shoe production and leaves himself only the best impressions. It is mainly designed to make leather materials with any other species. It also shows well its properties when applied to a tree, glass and other surfaces. Long-term fixation of parts will not be required - glue in a few minutes "grabs" the necessary parts. Use at a temperature not lower than + 17 degrees.

Degreasing and surface stripping are recommended before applying. The means is applied in 2-3 layers with intervals in time for 10 minutes. Shoes will be ready for wearing after 4 hours, provided the product is heated to a temperature of 90 degrees. Kenda Farben SAR 30E shows the cold resistance and to the heat, and also perfectly keeps the water. Buyers note that glue does not have a pronounced smell, which is a certain plus. A minus they consider the high cost.

In the process of socks, any shoes over time comes in disrepair. Since the main load falls on the sole, it is always more problems with it. It can be deformed, covered with cracks, burst, depart from the edge of the top of the shoes or fall off at all. If with the repair of the exit pair of shoes, it is possible to postpone, then to the repair of everyday shoes will have to be resorted immediately. The most relevant questions from all possible - how to glue the sole at home or close a small defect in the floor of the base.

For this, it is not necessary to possess special skills. It is enough to purchase suitable glue for the repair of shoes and follow the unacceptable advice of professionals.

Popular shoe glue brands

The market is saturated various adhesives For shoe production. Each of them is designed to work with a specific type of glued surfaces. What glue is better to use, it can be clarified by the seller's relevant products. Before sticking the sole, you should read the instructions attached to the goods.

"Desmocoll"

The glue includes polyurethane resins and modifying fillers. It is used to quickly glue the base of shoes from rubber, polyurethane, skin, PVC, thermoelastoplasts and tops from dense materials, synthetic, genuine leather. After drying, it gives a transparent glue seam, does not miss moisture.

The adhesive composition includes polychloroprene rubber, synthetic resins, thermal vulcanizers, organic solvents. Packing parts does not require long fixation. Used when repairing shoes from leather, rubber, with fabric riding. Not suitable for gluing a sole of polyurethane.

Glue "Moment" for shoes

It is used to join the sputted platform of shoes from rubber, thermoelastoplasts, skin, plastic to the top of the skin, fabric, leatherette. Due to the ease of use, uses popular among consumers. The composition includes resins, rubber, acetone, hydrocarbons. After the sole was glued at home, the product can be used in a day.

Important! By purchasing glue for the shoe soles, it is necessary to make sure that it can be used for a reliable and high-quality connection of those materials from which the top and sole of the boot are made. The scope of the composition is indicated on the package.

Necessary materials and tools

The quality of shoes does not always meet the established requirements, which often leads to the output of the product in the most inopportune moment. Therefore, even before the shoe platform began to unwit, or visible damage appeared on it, you should stock all necessary for repair. The novice shoe master will be needed:

Product preparation and glue

Before sticking the sole to the shoes, you need to carefully inspect the product and evaluate the degree of damage. Metal audit needs to be removed. If the sole dug in several places at once, and with the slightest exposure, it moves away from the top, it is better to tear it entirely and re-glue.

The surfaces on which the adhesive composition will be applied, degreased from dirt, degreased, remove the remnants of the old glue, dried. For better clutch parts, they are treated with sandpaper, creating roughness.

The glue is applied on both surfaces, it is evenly distributed with a brush with a thin layer. Before taking the product, you need to wait 10 - 15 minutes until the glue snacks. If the elements have a porous base, after this time, the composition is re-applied and withstands for another 15 minutes.

Important! Regardless of what is supposed to glue the sole to shoes, you should make sure that the room is well ventilated (all known formulations contain easily evaporating toxic substances). When performing work, it is impossible to smoke and be near open sources of flame.

Check the video to learn more:

Options for gluing soles

There are two ways reliable compound surfaces used at home. How to glue the sole, which methods better to choose depends on the skills and wishes of the wizard.

Cold way

The method does not require special devices, easy to execute. After applying the adhesive composition, the surfaces connected with the maximum force pressed to each other. It is necessary to control that there is no emptiness between the base of the top and the sole. After connecting the parts of the boot, it is installed under the jet at least 10 hours.

Hot fashion

The method is most often used when fixing shoes with a solid sole, provides perfect clutch over the entire surface. After applying, the glue is left to complete drying (usually takes 30 minutes). Then the soles of the shoes warm the hairdryer or above gas burner And intensively pressed to the top of the shoes for 15-20 seconds. You can use the shoe glued in this way after 48 hours.

From the video, you will learn how to apply thermocons:

Features of fixing soles with voids

Before sticking the sole on the sneakers, it is necessary to explore the rubber, covering the cell cells. In damaged places it is removed. The cavities are purified from dirt, fill the trimming of porous rubber and poured with a sealant.
Shoes with burst soles are better attributed to the repair shop.

If you consider it with due attention and diligence, you can extend the life of your favorite shoes for another a few years.

With long and continuous operation, shoes are deformed, while the seams are diverted, holes appear. In some, the situation can be avoided by repairing shoes in the workshop, but to solve the problem yourself.

Where to start repairing shoes yourself: how to prepare a boot, how to choose glue

To make a shoe need to choose glue. There are several glue brands, such as the point, PVC, rubber glue, PVA - they are all suitable for shoes, the boots including. The glue based on the polyvinilazenate is not recommended, because the properties of this glue are reduced by contact with water.

Before taking a shoe, it needs to be prepared to be prepared - wash with the help of a brush and soap, rinse with clean water, leave to be dried for a day. So you will avoid salary of the dirty surface and double work as a result. Not enough dry shoes will not be able to cross the glue as it should, with the result that you will not achieve the expected result.

After that, you need to take a small segment of the material or a cotton disk, moisten it in acetone, process the bonded surfaces and proceed to gluing. Surface degreasing will prevent bad gluing. Bonding will be even better if we clean the surfaces glued with sandpaper. Decrease the surface is not only acetone. Apparent gasoline is suitable.

How to stick the boot: the process from beginning to end

On the glued surface you need to apply a sufficient layer of glue, and leave to climb for 10 minutes. It is necessary that glue acquire some more dense structure that when compressing with a different surface, it will help to remove its excessively and without incl. After that, you need to strongly squeeze the boot with the sole, or other glued surfaces. Hold some time in the pressed state two surfaces. This will allow glue to clutch. After that, the shoes need to be put under the press for a day, for example, under the foot of the chair, etc. Best gloves shoes glue moment.

How to make a boot with a patch?

You may need to make shoes and in case of patch. Then to take the shoe, before applying glue, put the wool or newspaper inside the shoe so that the glue does not get inside. After that, degrees the surface of the shoes, then the surface of the patch and gently apply glue on the pay in those places where the patch will be sent to the shoes. Do not apply glue over the entire surface of the patch, because then the glue can get into the boot through the stuck gap. In this case, it is better to apply glue to the place of patch on the boot and give glue to stand for a few minutes. After that, attach a pay, press it and fix it by creating a press. In order to build some kind of press and take a shoe, just recalculate the boots, preventing the patch offset and ensuring good grip.

What to do if the baking of the boot did not bring the result - flash shoes

In this case, you can flash shoes. In this case, without the help of an experienced specialist, too, do not do. If you decide to try to make the procedure yourself and at your own risk and risk, then you will need a kapron thread and a fat shoe needle. With independently flashing shoes, remember that the shoes can be less than several or one size when flashing. And of course, you should not independently flash dear shoes that you do not want to spoil. Still, this procedure is carried out in shoe workshops on special equipmentwhich not only guarantees quality, but also aesthetic appearance of the boot after repair.

You should not independently flash the boots, just to connect the place with the hole. After all, if you incorrectly select an indent, then everything is not able to use shoes, its size will be too small for you.

Even the highest quality shoes with time deformed and wear out. As a result of daily socks, the effects of adverse factors and weather conditions, the product begin to flow and break. Fix similar defects allows special glue. Such a composition without difficulty will connect individual parts of the products, eliminating the place of course. What shoe glue is better to purchase? How to choose it?

Types of shoe glue

Before answering the question, what shoe glue is better to buy, it is worth dealing with what kind of varieties exist. At the moment, allocate:

• nirite or polychloroprene;
• polyurethane;
• rubuctoervinyl;
• combined;
• polychlorvinyl;
• universal.

Each type of shoe glue has its own characteristics and advantages. To understand which composition is better, it is worth familiar with the capabilities of each type. Before you purchase glue for shoes, it is worth carefully learning the instructions. This will help determine the choice, and also find out for which materials it is suitable.

Nairety glue

This shoe repair glue is designed to connect the stelek from felt, as well as rubber soles. At the same time, the top of the products can be made of any material, such as textiles or skin. It is waterproof glue that is not afraid of exposure low temperatures. The composition after drying remains durable for a long time. This is the main advantage of such adhesive. At the same time, it takes some time to connect separate parts and their fixation.

It is worth considering that such a waterproof shoe glue is not recommended to be used in the process of repairing products with polyurethane sole.

Polyurethane glue

Polyurethane glue for shoes is a composition that has a special strength. After applying, he hardly harden. Such glue is able to securely fix the details of the products made of material with a porous structure. After all, it is frozen in volume.

Polyurethane shoe glue is very often used by shoemakers due to its properties. However, it is worth using it with caution. The composition is capable of combining the sole of rubber or polyurethane with the top of the shoes made of leather, textiles, synthetics.

The most popular of this category is the glue for the shoes "Diamolac". It is ideal for repairing leather and rubber products. Such a composition is able to cope even with the most complex materials that are very difficult to glue. However, do not forget about the disadvantages of such a fund. Use polyurethane glue is carefully so as not to get on the front side of the items, as it is almost impossible to remove it from the surface.

Rubber-ferricvinyl composition

Such adhesive composition applies only for auxiliary work. It is not able to securely fix the sole and the top of the products. Therefore, the rubber-ferrilevinyl glue is mainly used to connect the leather and textile layers of the stelec, to seal the seams, for the liner of the braid. But the use of this composition is allowed to fix the top of the dermatin shoes to the rubber sole.

Such glue has some drawbacks. First of all, it is not able to withstand the prolonged impact of moisture, as well as low temperatures. Therefore, it is recommended to use for repair only summer shoes. However, it is worth considering that for the main works it is often not suitable.

Polychlorvinyl composition

So, what glue for shoes is better? Of course, one that is able to withstand the impact of adverse factors. Not every glue is capable of it. For example, polychlorvinyl. It includes a resin, which gives elasticity. Therefore, polychlorvinyl adhesive is often used to connect leather parts and textile layers of products, as well as for gluing braid.

It is worth noting that such a composition is capable of well-sealing the wearest part of any shoes, protecting it completely from the flows.

Universal glue

Probably, many have met on the shelves stores super-glue for shoes. This is a universal composition that is very popular. It is ideal only for small repair. Universal glue can be used for the liner of small parts and minor sections of the sole. For the main repair it is not recommended to use it. But despite this, universal glue is considered effective and simplest in use. This composition is for sale in small tubes.

Properties of good glue

So what shoe glue is better to use and what properties should he have? According to expert reviews, good composition Must have the following qualities:

How to use glue for shoes

So that the shoes served for a long time, not enough to simply choose high-quality glue. It is necessary to apply it correctly. It is worth considering several nuances:

Glue for shoes "Desmokol"

This is a glue for footwear professional. "Desmocol" is a solution of modified additives and polyurethane resin in an organic solvent. This glue is recommended not only for the repair of products, but also in the shoe industry.

This composition is intended for fast and reliable fixation of the top of the shoes from synthetic and natural materials, dense tissues to the sole, made of thermoelastoplasts, PVC, polyurethane, leather and rubber.

It is worth considering that such glue contains solvents and a fuel. Therefore, it is worth storing away from open fire. Repair of shoes using such a composition is recommended only indoors with good ventilation.

How to use "desmocol"

Before applying glue, it is recommended to mix thoroughly. Before starting work, the surface is to carefully process: to clean it, if necessary, emery paper or degreased. On both parts of the product you need to apply glue with a thin layer. At the same time there are certain rules. If the material absorbs well, then after 15 minutes you need to re-apply the glue layer. The details of the shoes do not need to be connected. After that, it is worth waiting for up to 50 minutes. If necessary, the bottom of the shoes is recommended to be activated for 3 minutes at 75 ° C. Now separate parts of the product can be connected and then press. In this case, the force should be from 0.2 to 0.5 MPa. Time takes a bit: from 15 to 20 s. The maximum strength is achieved at a temperature of 20 ° C for 2 days.

Nairit "Supozhnik": Adhesive shoe glue

Such adhesive composition is a solution of stickiness amplifiers and polychloroprene rubber in a mixture of special organic solvents. This glue is recommended for use in the shoe industry and not only.

Basically, the glue "shoemaker" is used to connect the upper part of the shoes from synthetic or genuine leather and the sole, made of rubber of any kind or skin. Also, the tool is often used to fix tights, stelks, lining and reinforcing elements.

It is worth noting that such glue has solvents in its composition and is easily flammable. Therefore, the container with the means is not recommended to be left near open flame. In addition to this itself, the adhesive composition is toxic. Therefore, it is recommended to use it in a room that is well ventilated.

How to use Nairit "Supozhnik"

Before applying glue, it is recommended to mix well. For details securely fixed, they should be prepared. In some cases, it may be necessary to stripping with emery paper, as well as degreasing. If the material is badly absorbed, then it is necessary to apply only one layer of glue. It should be thin. If the material absorbs well, then 20 minutes after the first application, it is worth putting one more layer. After that, it is not recommended to connect the details. So that the fixation was more reliable, it is worth withstanding minutes 20. If the surface is rubber, then for greater strength it is recommended to be activated at a temperature of from 55 to 65 ° C. It leaves 2 to 4 minutes. At the end of the part, it is necessary to connect, and then press with an effort from 0.2 to 0.5 MPa for only 15. The maximum strength is achieved at 20 ° С three days later.

In conclusion

The glue for the soles of the shoes or for small parts should be seamless in accordance with the material from which the product is made. Only so you can extend the life of their service, and also significantly save on the services of specialists. Also choose glue is recommended based on the quality of materials, as well as the complexity of the repair. Do not save on similar means. After all, high-quality and reliable glue are the key to the successful repair of shoes, which allows you to extend its service life and maintain an attractive appearance.