Modular PVC coating. Overview of modular PVC floor coverings Positive material quality

Modern materials for flooring, which have been available on sale, open up new opportunities for registration of floors not only in residential premises, but also on terraces, balconies, in arbors, patio, technical facilities, as well as device tracks on open spaces of country sites.

- relatively the new kind products. They are produced from different materialsand they are intended for different rooms. For their manufacture, natural wood, polyvinyl chloride, rubber, and composite materials are used.

Such coatings consist of separate modules that have most often square shape, although some of them are produced as other figures, sometimes very complex geometrically.

Select a coating consisting of modules, you can for every taste. So it can be:

Garden parquet or Decing made from thermoderlyeva of different breeds or from wood materials in a complex with polymers;

Rubber tile, having locks - mainly used in the technical premises;

Tile from rubber crumb, produced without locks and fastening, most often on glue;

PVC tile ( polyvirihloride), suitable for residential and public premises, as well as for platforms on the street.

In order to choose the right coating and firmly know how it can be used, it is necessary to figure it out in detail in the characteristics and installation technologies of each of them.

Garden parquet

Garden parquet is a surprisingly convenient material that can enjoy the surface of the floor and to serve a very long time. It is produced in the form of a tile, which may have a size of 30 × 30, 30 × 50, 50 × 50 cm.

It is sometimes called decong, as it is often made in the form of a deck or terraced board, which can have a ribbed or smooth surface. The ribbed board makes the surface with several, which is very important for covering the terraces and stairs steps. The board is produced in length from one and a half to six meters, so it is convenient to install in many cases.

garden parquet

Using garden parquet

The quality of such a parquet allows you to use it for laying:

Roads around an open and closed pool;

Garden paths;

Open and closed terraces and balconies;

In the premises of baths and saunas;

In bathrooms;

In kitchens.

Construction of modules

This coating is separate modules consisting of two layers:

The lower, made of polyvinyl chloride in the form of a grid, on which fasteners for the upper layer and to fasten the tiles between themselves;

Top consisting of separate removable lamellae made from natural tree or from wood sawdust mixed for ligament material with polymers.

The lamellas are fixed on a polyvinyl chloride lattice at a certain distance, which allows moisture not to linger on the surface, staining on the basis of the coating.

The materials used and the technology of their manufacturing

1. Natural wood

As mentioned above, the lamellas are often made from a natural tree. Usually, solid wood specular breeds are selected for this, such as TIK, kempas, Azobe, kumaru and red tree. These trees grow in conditions of tropical humidity, and therefore themselves are moisture-resistant material.

But it should be noted that thanks to these positive characteristics, the garden parquet has a fairly high price. To make the material more affordable, such well-known wood rocks as larch or cedar are also used to produce lamellae.

But even the strongest and high-quality wood will not stand the long-term effect on its high humidity and ultraviolet rays, so the material passes special processing.

Wood for the manufacture of garden parquet is placed in a hermetically closed camera, where it is hampered by a hot ferry, thereby removing extra moisture from it and making durable and waterproof. After these procedures, the material will not swell from moisture and will not fuse from hot straight ultraviolet rays. Due to its resistance to external influences, the coating will not change the shade and is not deformed even after many years of its use.

2. Composite material

In addition to natural wood, a composite material on a wood basis is used for the manufacture of lamellas, which is called a polymer and wood composite. It consists of finely recycled sawdust, which is mixed with thermoplastic. The resulting material has high moisture resistance, strength and low thermal conductivity.

Materials for production are taken in the ratio: 65-80% of chopped wood and 35-20% polymer, so such a composite can be bolder to call almost that wooden.

Installation of modular garden parquet

The installation of a garden parquet and a terrace board is quite simple, and this is a clear advantage of the material, since even the inexperienced master is quite accessible to this work.

1. Garden parquet

Garden parquet can be laid on different surfaces - it can be sand, crushed stone and soil, but the concrete base is best for it. If natural surfaces are selected on the plot, they are recommended to cover with geotextiles so that the grass does not germinate through the parquet.

Laying modules on concrete or ceramic tiles Does not require special training. The main thing is that the surface is smooth.

Installation is carried out quickly enough, you can easily cope with it alone and set several square meters Literally in a couple of hours.

Parquet modules do not require additional devices or fastening elements for the compound, as they are fastened with each other by means of locks on the lower layer. If the parquet module needs to be shortened, it is easily cut with a conventional hacksaw. The same is done if you need to remove a small part of the lamella, so that it successfully stood, for example, around the pipe or on the curved wall line.

2. Terraced board

• • For laying a modular terrace board, transverse lags are needed, which are fixed to a rigid basis at a distance of each other 40 - 50 cm. Lags when laying must have a small bias so that the water has the ability to drain from the surface, and it is necessary to calculate in advance. You can under lags one side Put hard material, such as ceramic tiles.

    terraced board

• In the grooves located on the ends of the boards, install metal clips, which are then screwed to lags.
• After that, the next board is set by a groove into clips, and so stacked all the flooring.
• If the boards made of composite material were used, and they have inside the cavity, then the sides need to install plugs, which will give the flooring aesthetic completion, and will not allow to enter the water and dirt.

Video - Features of the modular coating "Garden Parquet"

Modular PVC coatings

Modules made of polyvinyl chloride is a persistent and reliable coating that is not afraid of mechanical effects. Therefore, it is often used in technical buildings with large loads on the floors, such as garages, workshops or warehouses. In addition, the modules are well suited for office space, for places with a large intensity of human flow, as well as for therapeutic institutions, kindergartens, street sites and seasonal summer cafes.

Benefits of material

• Resistance to low and high temperatures - Its operation is possible in conditions from - 28 to +55 degrees.
• Resistance to chemicals, oils, salts and mechanical influences.
• Easy and quick installation of plates that do not require applications additional Materials and the presence of great experience in this work.
• The room can be used immediately after installing the floor covering.
• Resistance to shock and other dynamic loads.
• The PVC module coating does not require special preparation of the base under it - the main strength and flatness of the surface is the main thing.
• Simple and easy disassembly tile if you need to be transferred to another base.
• Ease repair work If there are damage to several modules, it is enough to replace only the deformed, without disassembling the entire coating.
• The environmental friendliness of the material allows you to use it in children's preschool and school institutions.

Preparation of the foundation

When preparing the basis for PVC modules, you do not need to remove paint and oil spots from it, you do not need to dismantle the old coating, dry it from moisture or, on the contrary, moisturize. It is enough to hold a number of minor and unearmable events:

• Clean the surface from coarse and large protrusions, remove possible nails and crutches.
• Seared pits, cracks and unnecessary holes.
• Clean the surface from dirt, chips, sand, construction garbage, it is advisable to collect dust with a vacuum cleaner.
• If there is a chance of moisture from entering the base under the coating, then the surface must be treated with antiseptic solution before the filament modules.

Mounting modular coating from PVC

Installation can be carried out on a given-free surface, and only a wooden hammer will be needed for laying material.

Mounting modules start with room angle. It is necessarily left between the wall and the coverage of the clearance of 6 ÷ 12 mm, which will serve to compensate for the extensions of the material with thermal differences. After completion of the work, the clearance is closed by a plinth for the completion of the species.

The modular tiles from the side, which adjoins the wall, the locks for the compounds are cut with an electrolybiz.

Tiles are connected by locks that call the "swallow tail" - they are located along the edges of the module. The lock of one tile is installed without distinguishing into the lock the other and the top are neatly closed with a wooden hammer until the module is completely connected.

If the last places are not included in size in the floor area, they are also customized, cutting off the excess part of the jigsaw.

Modules can be laid without offset, i.e. The solid stove is attached to a whole plate. If you use two colors, you get the semblance of a chessboard.

They may be laid and displaced the next row modules in relation to the previous one - in this case, the drawing is obtained. brickwork" If it is such a variant exactly, the modules are placed in this order and dock the element of the lock on the corner of the plate with the middle of the other, as if planning its location. Then clog one part of the castle to another. When two modules are docked, then work will be easier.

Applying modules of different colors, on the floor you can post aesthetic pattern, which will decorate the room.

modular PVC coatings

Is the care of such a coating?

Caring for the modular coating will not be much difficult. It should be regularly removed from the surface of small garbage, dust and sand with a simple sweeping or with a vacuum cleaner.

Wet cleaning can be carried out using detergents, and fat stains remove degreasing compositions.

In technical premises, the surface is often treated with an acrylic basis polyrolla, which will give a special effect.

Types of relief drawings

PVC modules for flooring have different embossed drawings, from which you can choose the desired room.

Such a relief is called "Grain"

The presented relief is called "grain", and it is often chosen for installation in workshops and garages, as well as in industrial workshops. His advantage for the flooring in these premises is that the drawing is not deep, and its cleaning from garbage and dust will be easy. At the same time, the coating is not slippery, and it is nice to walk.

PVC coating with a "coin" relief

Another popular pattern of the module is a "coin". Such plates are produced different bright flowersAnd it is easy to arrange a coating on a children's outdoor area or indoors. Flooring from such modules will give the room brightness and make it fun. Besides decorative effect The coating has a number of other advantages for children's institutions, and the most important of them are environmental purity and the fact that it is not slippery, which means safe.

Shallow relief, according to the type of "orange peel"

The coating similar to the orange crust is often so called "orange". It can often be found in sports and gyms, as well as in industrial shops of food enterprises. This choice is justified by the fact that the relief on the modules do not deepand they are not going to large number Dust, so such a floor is easy to put in order.

Surface "Shagren" - excellent anti-slip qualities

Several resembling the relief of orange peel and the texture "Shagreen", which is used in the sports halls, corridors of therapeutic institutions, the Cabinets of therapeutic physical education, the halls of the stores and in the workshops of some enterprises.

Modular tiles with a universal pattern can be applied in any rooms, ranging from gaming children's rooms to exhibition halls, from fitness clubs to administrative buildings, as well as in all social and industrial premises.

In addition to the embedded patterns, there are other, from which you can choose anyone to your liking.

Video: Features of modular PVC coatings

Rubber modular coatings

Rubber modular coatings are used in many indoors and for open areas - tennis courts, playgrounds, garden and park tracks, as well as other places of work and recreation.

Some types of rubber modular coatings are used for flooring in garages and workshops. They perfectly perform their functions thanks to their positive qualities.

With some assumption to modular coatings, you can attribute a special tile or blocks, panels that are made of rubber crumbs. Raw materials are obtained ofmelted rubber, obtained by processing old products, such as disposed of automobile tires.

The crushed material is complemented by dyes and stabilizers, and a tile or panel is formed from this mass. The form may be rectangular, have a complex configuration characteristic paving slab, as well as to repeat the form of the account of its curvilinear forms, exactly fitted to each other (puzzle).

If the tile has locks, it does not require special preparation - it is enough that the surface is smooth. For the base, such materials like sand, gravel, small stone, soil or concrete will be suitable.

Rubber tile, having a conventional square shape, but not having clutch locks, is laid only on a flat, fairly smooth surface and is placed on adhesive mass.

Positive quality material

Good heat and sound insulation;

Strength and durability;

Resistance to moisture and ultraviolet;

Wear resistance, withstand high mechanical loads;

Environmental safety, no odors;

Resistance to chemically active liquids;

Simplicity of coating care;

Lightness of repair (it is enough to replace one or more damaged segments);

The coating is not slippery and pleasant to walk, which is very important in the winter and autumn-spring period.

Video: Reliable floor in the garage of rubber modules

If it's time to update the floor covering in the garage, or it is decided to pave a track on the garden plot, insulate the place to play in a children's room or put the floor on the balcony or terrace, then a better coating than modular plates, not found. Moreover, from all modular flooring presented in the market, you can always find the one that will like.

NPP Hz offers you modular flooring of PVC and polypropylene. Modular floor coverings from modern materials Have a number of advantages compared with traditional types of flooring:

• Located on any even base, even inclined.
• Mounted quickly and simply (1 worker - 100-200 m 2 per day), while the room can be continued to operate.
• Does not slide, which is especially important for premises with high humidity
• Has high noise insulating properties
• Good extinguishes vibration from working equipment.
• It has high resistance to mechanical effects, the effects of alkalis and acids.
• Does not support combustion.
• Easily removed and installed during repair, it can be easily transferred from one room to another.

Sensor modular floor

Modular outdoor PVC covers SENSOR series (Russia)
Name of coating	up to 100 m.kv.	from 100 m.kv.	from 500 m.kv.	from 1000 m.kv.
Coatings 7 mm, Z-Castle (Swallow Tail)
Modular coating Sensor Tech (7 mm) 500x500				contractual
Modular Sensor Rice (7mm) 500x500				contractual
Modular coating Sensor Avers (7mm) 500x500				contractual
Z-castle threshold (7 mm) piece
Coatings 7 mm, T-lock
				contractual
				contractual
				contractual
Modular coating Sensor Stiks (7mm) 500x500 Promotion !!!
Threshold T-Castle (7 mm) Piece
Coatings 5 \u200b\u200bmm, Z-Castle (Swallow Tail)
Modular coating Sensor Tech (5 mm) 500x500				contractual
Modular coating Sensor Rice (5 mm) 500x500				contractual
Modular coating SENSOR AVERS (5 mm) 500x500				contractual
Coatings 5 \u200b\u200bmm, T-lock
Modular coating Sensor EURO (7 mm) 500x500				contractual
Modular coating Sensor Bit (7 mm) 500x500				contractual
Modular coating Sensor Sigma (7 mm) 500x500				contractual
Modular coating Sensor Stiks (7mm) 500x500				contractual
Factor series coatings
Modular coating SENSOR FACTOR (6 mm) 375x375				contractual
Modular Sensor Factor Coating (8 mm) 375x375				contractual
Modular Sensor Factor Coating (10 mm) 375x375				contractual
Modular coating Sensor Factor Sport (14 mm) 375x375				contractual
Mudsky protection
Modular coating Optima (9 mm) 250x250				contractual
Modular coating Optima (16 mm) 250x250				contractual
Modular coating Optima DUOS (16 mm) 250x250				contractual
Pool and shower coating
Modular coating AQUA 250x340				contractual
Wet coating
Modular coating Canal (14 mm) 375x375				contractual
Tactile tile
PVC 300x300 Tile Diagonal, Stripes, Squares, Coins	160 per piece	contractual	contractual	contractual
Tile TPU 300x300 Diagonal, Stripes, Squares, Coins	290 per piece	contractual	contractual	contractual

* When buying more than 1000 square meters. Prices are coordinated additionally

Basic colors of modular coatings PVC series Sensor

Modular floor M-Tile (Russia)

Modular Outdoor PVC Coatings M-Tile Series (Russia)

Name of coating	up to 100 m.kv.	from 100 m.kv.	from 500 m.kv.	from 1000 m.kv.
Modular coating Jeton (7mm) 500x500				contractual
Modular coating Hard Steel (7 mm) 500x500				contractual
Modular coating Hard Studded (7 mm) 500x500				contractual
Modular coating Sportline (7 mm) 500x500				contractual
Modular coating Universal (5 mm) 500x500				contractual
Modular Diamond Coating (7 mm) 500x500				contractual

Supplement for the color of the coating of the M-Tile series (Basic Color Gray)

Modular floor for a country house

Modular floor coverings for a country house
Coverage with hidden lock
Modular coating SENSOR SECRET TECH (7 mm) 500х500				contractual
Modular coating Sensor Secret Avers (7 mm) 500x500				contractual
Modular coating VEROPOL COM (6 mm) 408x408 Promotion !!!				contractual
Modular coating VEROPOL PROF (7.5 mm) 500x500 Promotion !!!				contractual
Modular coating VEROPOL BASE (6 mm) 500x500				contractual
Modular coating VEROPOL STONE (7 mm) 500x500				contractual

By contacting the Website online store, you can always buy modular dirt coatings wholesale and retail.

About modular coatings

Modular dirt coatings are used in commercial premises to reduce the amount of mud transport brought on shoes and wheels. Such coatings can be made from plastics (primarily PVC) or rubber. In addition, there are special dirt-proof carpets.

Modular PVC coatings

Modular PVC coatings are used in areas with high patency. Dirt is held due to protrusions and varnishes on the surface. Such floors are often laid at the entrances to shops, shopping centers, office buildings and other public facilities with high patency. In addition, they are often used in warehouses: covers of increased strength ways to withstand even turn truck.

Application

• the shops;
• shopping centers;
• baby and gardens and schools;
• hospitals and clinics;
• station and airports;
• other public buildings;
• warehouse and industrial premises

Rubber modular coatings

Soft modular rubber coatings are not only delayed dirt and form a non-slip surface, but also partially absorb strikes. They are often used in the garage and "wet" industrial premises

Application

• warehouses;
• industrial premises;
• transport corridors
• pools and baths.

Advantages of modular coatings

• large assortment of drawings and colors
• high strength and wear resistance;
• effective dirt retention;
• moisture resistance;
• low electrical conductivity;
• simplicity of installation and cleaning;
• low price.

Dirt-proof carpets

Modular carpet for dirt detention is usually made from PVC, polyethylene or polypropylene. Dirt is held at the expense of a pile. Such coatings have a relatively low wear resistance and are used on sections with small and medium permeability.

Technical progress in all areas of life has led to a curious phenomenon: previously complex processes have become accessible even to amateurs. Work on the device of floors of any types has always demanded special knowledge and defined qualifications. Today, the release of modular flooring is established, with the installation of which any non-specialist can cope. Polyvinyl chloride tiles are designed according to the principle of children's puzzles. To connect them into a single canvas, a sufficient wooden or rubber hammer.

Composition and design of PVC tiles

Like all ingenious, floor PVC coverage is very simple, but at the same time a surprisingly durable and reliable material. The usual tile thickness from 5 to 7 mm, it consists of 3 layers:

1. The base of polyvinyl chloride, in which quartz sand and fiberglass is added.
2. Film to which drawing is applied.
3. Coverage of transparent protective plastic.

The modules tiles are produced in the form of squares of different sizes, with a length of the side 33, 50 and 61 cm. To ensure reliable and simple compound into a single integer and the device of monolithic polymer coatings, they are equipped with lock mounts: T-shaped and in the form of a swallow tail.

Why are modern consumers choose PVC coverage?

In fact, why choose a vinyl tile for the floor, if there are many other proven options - wood, concrete, polymers? This question is asked people who are not familiar with the advantages of tiles from polyvinyl chloride:

• harmlessness - Polyvinyl chloride Eco-friendly material, made syringes for injections;
• water-repellent properties - Tile is designed for use in conditions of high humidity, it makes up the floors in the greenhouses, lay the coating around the pools, put in the bathrooms;
• heat resistance - the material is not deformed when the temperatures are detected, so it is successfully used for the device of warm floors, as well as laid on the garden tracks, in the barbecue areas and on the veranda of summer cottages;
• easy repair - If one of the tiles for any reason has emerged, it is enough to remove it to be replaced to be replaced and install a new one, it takes at least the cost of money and time;
• easy cleaning - To ensure the purity and freshness of the floor covering, quite ordinary wet cleaning manually or a special machine.

These advantages are important for consumers planning to use domestic tiles: soft carpet in bedrooms, bizarre combinations of flowers in halls and living rooms, water-repellent coating in bathrooms and kitchens, green grass and comfortable, clean tracks in summer cottages.

The best floors for production

For industrial facilities with increased requirements, where the device of monolithic polymer coatings is needed, the modular tile is invaluable due to its qualities:

• high mechanical strength - the ideal composition of the material from which the tile is made allows to use it on any industries, where there are large mechanical loads on the floor surface, frequent point blows, the movement of heavy automobile transport;
• abrasability resistance - the durable composition of the upper layer prevents the formation of scratches and scratches, it is placed in places of large cluster of people, in the halls of train station and airports, in shopping centers;
• chemical resistance - in harmful production with increased demands used aggressive substances that can damage the coating. PVC tile is particularly relevant, it is used in car services and garages, in chemical plants and in laboratories, it is resistant to alkali, acids and salts, after cleaning with cleaning compositions and special solvents, there remains a trace;
• good sound absorption - the viscous structure of the material is capable of extinguishing noise, so the modular coating is placed in factory workshops with increased level noise, it provides additional comfort and conveniences working;
• the speed of installation is a modular coating is going so quickly that the technological process that passes indoors is not interrupted.

For industrial facilities, one of the main criteria is the mechanical strength of the coating, the modular tile fully complies with this requirement. To make the workflow more comfortable, the manufacturers have settled the production of commercial tiles of different shades.

Down with gray boring floors in enterprises and shops! Floor coatings from polychlorvinyl are produced in any color gammaThey create psychological comfort at work. Additional convenience of such a dirt coating is that it is easily clean, the use of any chemical solvents is not able to damage its surface.

Main characteristics

• Type of lock connection: T-shaped, "swallow tail", "Carnations", hidden.
• Tile thickness: 0.5-1.6 cm.
• Module dimensions: from 25x25 to 50x50 cm.
• Material mass: 3.3-12 kg.
• Material density: 1.3-1.4 g / cm3.
• PVC hardness Tile: 45-94 Shore.
• The temperature range in which it is possible: from -30 to +50 degrees.

About deficiencies of the modular coating

Unfortunately, designers have not yet been created construction material, absolutely no flaws. The modular tile they also have:

• the need to careful preparation of the base under the laying - it should be perfectly even;
• manufacturing material - synthetic;
• comparatively short service life - up to 10 years.

Their list compared to the merits is so brief and insignificant that it does not affect the choice.

Application of flooring from PVC - from the country area to industrial floors

Modular PVC tile is so universal material that it is successfully used as an outdoor coating for the premises of any destination and even for the arrangement of open tracks and sites. Depending on the application area, modular coatings are classified as:

• commercial and semi-commercial - such tiles are placed in industrial premises and in places with a large intensity of people movement, they are distinguished by special strength and abrasion resistance;
• specialized - tiles intended for laying in sports halls, coatings with anti-slip surface, with refractory or antistatic properties;
• household - floor coverings for houses or apartments, they are placed in the premises of schools, kindergartens and hospitals, this is an excellent option for restaurants, cafes and other catering establishments.

The main criterion for selecting tiles is its purpose. Constructors are thought out all the nuances affecting its use: anti-slip coating for the street version, heavy duty for industrial facilities and wholesalers, beauty and environmental friendliness for houses and apartments. In addition, orthopedic coatings are produced, with the help of which the stop massage is easily and naturally carried out, the tactile tile for orientation in the space of visually impaired, flooring, ideally suitable for gyms and sports halls, sites and courts.

Paradise for designer

On design floor PVC coating root different from vinyl tilewho in recent Soviet times were flooded floors in typical apartments. In the appearance of new tiles there is nothing similar to the dull monotonous tones of the materials of the Soviet period. Modern modular floor coverings are distinguished by the bright colors of any shades of the palette, they are monophonic or decorated geometric patterns.

There are options exactly imitating noble parquet and rare marble. Want to create an artificial lawn on the plot or a small football field? On sale there is a tile with the texture of a young grass laid on the prepared foundation, it will fine with the task. If the soul requires a soft solid carpet coating in the bedroom - such a rug, durable and easy to clean, collected from the corresponding module tiles.

Mounting modular tile - sequence and features

Before starting the installation, it is necessary to remove an old coating, completely repaired the surface to which the floors will be laid. All cracks, potholes and chips, put sand, if necessary, make a new screed. The modular coating is mounted on an aligned, purified, dusty and primed base.

The assembly starts from the middle or from the corners of the room. The tiles are easily connected to each other with simple lock systems, the locations of the connections are slightly slightly fixed with the rubber hammer. If you need to trim the tile in size, it is made by an electric bike or joinery knife. The tightness of the coating gives the method of cold welding, in which glue for vinyl glue into the lock connections with a special needle.

Thanks to this procedure, the coating acquires compliance with the increased requirements for the operation in conditions of high humidity, it is placed on car wash, with a basin device, in shower. Good chemical resistance allows the use of modular tile connected into a hermetic surface, in car services, repair shops, chemical production and laboratories, wherever there is the probability of exposure to the floor of gasoline, acids, salts.

The dirt coating of polyvinyl chloride is quickly cleaned from dust, dirt, oils and any chemical substances, it is easy to clean and does not lose the original bright colors.

All these beneficial features Attract buyers who want to update the floors in the house or apartment, reflect country cottage area The device is comfortable tracks, soft mats in the pool area. No less often, the modular tile acquire entrepreneurs for the purpose of the device on production, in stores, in warehouses, in shopping centers of clean, comfortable and functional floors.

Modular coatings and PVC tiles are designed to quickly and efficiently solve the problem on the device of a reliable floor covering in the gym and gym, as well as for commercial and industrial premises with a high degree of load.
Modular coatings and PVC tiles are tiles of durable, chemically inert, oil-resistant and gasoline, non-combustible PVC.
The large thickness of the modular coating and PVC tiles in 7 mm in combination with the high strength of the material provide high reliability and wear resistance of the modular coating. Modular coatings and PVC tiles are ideal for high load zones, such as industrial and storage rooms.
Modular coatings and PVC tile are able to withstand not only the movement of the carts and rookles, but also the movement of heavy machines and goods by rolling on the pad steel rollers, as well as large loaders on studded rubber.
Between themselves, modular coatings and PVC tiles are attached "T-shaped" lock, lock type "swallow tail" or a hidden lock, providing an impeccable closure.
Unlike bulk floors, the execution of which should be made strictly on the horizontal surface, modular coatings and PVC tile You can even sharpen on inclined surfaces. Also, modular coatings and PVC tile are more resistant to shock load, vibration and high static load (20 tons per sq.m.). Moreover, 7-millimeter modular coatings and PVC tiles are able to withstand the load on the turn.
In the production premises, modular coatings and PVC tiles make it possible to reduce the noise level (including low-frequency hum), vibration, dust formation.
Modular coatings and PVC Tile 7 mm thick withstand static load 30 tons per 1 sq.m.
The electrical resistance of the modular coating and PVC tiles is 10 9 ohms according to EN 1081.
Easy installation and dismantling of the modular coating and PVC tiles makes it possible and even simple transfer from one room to another.
When repairing the coating, it is enough to replace the damaged elements without displacement and removal of adjacent.

Modular coatings and PVC tiles are designed for operation exclusively indoors. Before installation, the room intended for laying, and the floorboards must be supplemented at a constant temperature for 24 hours. At the same temperature, it is recommended to install. This is necessary to eliminate possible deviations of the sizes of the flooring as a result of a thermal expansion, which may make it difficult to assemble the coating.

In case the room will be moved by the loaders, rigging carts, hand trolleys on non-pneumatic wheels, light three-wheeled loaders with one controlled wheel, rolling cargo rollers and other reasons for high loads on the floors, the manufacturer recommends using the type of coating, with a thickness of no less 7 mm. At the same time, in places of the most intense movement (entry, departure, travel, turns, turns, reversals, sharp braking) Modular coating and PVC tiles are recommended to be glued to the base, following the instructions of the manufacturer's instructions for the use of this product.

Online store My hippo ® in Moscow It offers to buy modular flooring PVC covers, PVC tiles wholesale and retail from leading domestic and foreign manufacturers.
Own warehouse. Flexible system of discounts. Comfortable logistics. Permanent availability of the most sought-after positions.
Convenient work with regional buyers. All forms of payment for both physical and legal entities.
A complete set of accompanying documents. All certificates and permits.
Our managers will help you choose exactly the products that you need.
Call by phone: ☎ 8 800 500 66 41, 8 495 648 49 30 Or write on