Homemade fan rakes for foliage. How to make a rake with your own hands without much effort

The weak node of sliding fan robble is the capture width adjustment mechanism. Household models equipped with tin retainers break after two or three seasons of operation. Consider a simple way to restore the health of the garden tool for half an hour.

The movable mechanism of steel fan robbles comes in disrepair due to the wear of the working part of the lever and the deformation of its axis, usually representing the screw M4. The device's clamp ceases to crimp the tube and the position fixation becomes impossible. The problem is solved by replacing the pin on the new and adding homemade insert compensating for the production of the lever.

For the rapid repair of garden inventory, you will need:

• Screwdriver;
• Passatia;
• Rozhkov keys on "seven";
• Scissors for metal;
• Flat file;
• Measuring tool;
• Strip galvanized tin;
• New bolt, nuts.

Pro order of repair of fan robbles

1) unscrew the nut from the rod using the key and screwdriver.

2) pulling the axis, disassemble the mechanism.

3) Place and cut the strip of tin, determining the dimensions over the movable plate of the device:

• They will have the same one;
• To the length of the "tongue" add 20-25 mm on bend.

4) at a right angle bend the edge of a 10 mm long strip by passatages.

5) The curved end of the workpiece is raised under the "tongue".

6) Pressing on the tin, pressed it until it stops.

7) Using Pasal, fix one side of the part.

Perform a similar bend on the opposite side of the plate.

9) Turning the item, finally compress together both metal strips.

10) Align the clamp so that its parts returned to parallel positions.

11) with a lever with a lever stable metal influx.
The "current" repair of the metal robles of the fan-type, produced by their own hands takes less than 30 minutes and allows you to use the instrument for the purpose of at least one season.

Any gardener, a horticulture-amateur or farmer does not represent, how can I handle your land without using robber - whether it is ordinary garden or production. With this tool, you can handle the soil, collect harvest and maintain the entire area clean. What are the types of rakes, for what works are they intended and how can wood rake can be made independently?

Rake garden perform a variety of functions: breaking the beds, cleaning the area from dry leaves, beveled herbs and weeds, etc. This is the best assistant gardeners, gardeners and farmers. The design of this tool is extremely simple: a stalk, on which the transverse plank with teeth is attracted. Based on their purpose, configuration changes: the number of teeth, their shape, length, thickness, material and more.

The working part of the rake is made of various materials, from which the strength and weight of the entire instrument directly depends:

• painted iron - relatively heavy, rapid curvature of teeth, high wear;
• steel - durable, but heavy;
• hardened aluminum - has the best quality and weight ratio;
• plastic and plastic - light and maneuverable, but fragile;
• wooden - enough durable and lungs.

For farms and large agricultural land, special rake-sewers are produced - a machine that is intended for cracking and grossing the abosses.

Types of rake

To work on the plot, the work is as efficient as possible, but with minimal efforts, you need to use different kinds Rables for their direct intended purpose. Direct rake - the most universal view. This type of teeth are perpendicular to the cutter, slightly bent inside. They are well suited:

• for cracking leaves;
• soil loosenings;
• leveling of the Earth after Dropping;
• removing the remaining roots.

Among traditional types, rakes with twisted teeth are distinguished - they are better broken by the piles of the Earth and flashes the soil well. Homemade rake from wood usually have a wide base with short teeth. Their main purpose is cleaning dry weeds and beveled grass. For this specified type, wooden or aluminum cuttings are made.

Fan rake consists of a base resembling the revealed fan. The teeth are long thin rods bent at the ends. Often such rakes use:

• for the uploading of leaves and small garbage from hard-to-reach places;
• lawn cleaning before haircut;
• sleeping lawn.

Choosing a fan rake, it is worth considering some design features: so as not to injure young plants better take advantage of inventory with plastic teeth; For work along the fences and in the corners, the rake triangular shape is perfectly suitable, etc. In agriculture also allocate different types Grabley, depending on the features of the device of the mechanisms:

• tape;
• rake-tailoring wheels (GVK);
• wheel-finger, which also belong to GVK;
• transverse and pr.

Among the aggregates of the GVK class, specialists are the best of the following models: GVK-6, GVK-7, GVK-3, GVK "Solnyshko", GVK-2,5k. In particular, GVK-6 is perfectly crushing the dried grass, hay and straw in the rolls of a certain size, and also produce punctures so that herbal mass is going to the air, not twisted roller. The principle of operation of the GVC is that during the movement of the aggregate, the working wheels are spinning and fingers move the grass to the length of the capture of the wheel. After the passage of all wheels, the hay moves to the central axis, thus forming a roll. Such aggregates are now many craftsmen doing their own hands, adapting to their needs and features of technology, relief, grown by cultures, etc.

Video "Varieties of rake"

In that video, it is described about the varieties of rake. You can also find out what kind of better suitable for your land.

We make cutlets

In order to get a reliable and comfortable stalk for rake, made with your own hands, it is best to start with the selection of wood:

• pine - no moisture is afraid, light enough, but continuing;
• birch - is a better option that combines sufficient strength and low weight, easy to handle;
• beech - in terms of its qualities, as close as possible to birch, but requires additional processing;
• poplar - also relates to optimal variants in quality, weight and ease of treatment;
• oak - the most durable material, but heavy and difficult to handle.

For independent manufacture Cuthenka can be taken non-standard material - the trunk of a young tree (the best is considered: lion, aspen or maple). Pick up the desired length of the workpiece and check that it be without defects (bitch, cracks). Additionally grind or painting the finished paper is not worth it, since it is very smooth surface The cutlets will turn and rub the water, corn. It is very important to make a ready-made cutlery well and securely secure in the holder of rake. You should also crop cuttings so that it does not go for the landing socket.

How to make a work surface

Right now in specialized stores and on the market you can easily find different types Rabel, but wooden fairly rare, so they can be easily made it with their own hands. They consist of a cutlery, the main part with the teeth and coupling. To make wooden rakes, you should take a few varieties of wood: lighter (pine or spruce) is suitable for the cutting, and for the plank-pad and teeth solid (elm, oak, rowan, etc.).

Make a block of a block up to 60 cm long, 5 cm wide, 3 cm high. Using the planer, oversight it. Then the drill make the hole for the teeth (10-15 mm) at a distance of 40 mm from each other. Make square billets for teeth from the selected material. Then cut the desired number of teeth with a knife. Their length should be 10-12 cm.

Please note that the head of the teeth must be made by 1-2 mm more than the velocked holes in the block. The shape of the teeth can be arbitrary, but necessarily with pointed ends. From the straight branch, take the cuttings, sharpen one end, squeak the surface of the sandpaper. Make cut 25 cm on the other end of the cutting and fix it with a clutch and nails. Then extend the supreme parts by 15 cm and also sharpen them. Homemade rakes made by their own hands ready!

Video "How to make fan rake"

In this video, you can see the option of making fan robbles with your own hands.

Those who handle at least a small plot of land know that when performing garden-earth work, it is impossible to do without robber. This tool is the primary in the list of garden inventory and performs several both basic and auxiliary functions.

Device and purpose

The device at robble is very simple. The design is a stalk with a transverse rail with teeth, which perform the intended function of the robbery. Garden rakes are used for a wide variety of work. With the help of them you can:

• purify a plot from dry foliage;
• raking a stubborn grass;
• remove from the ground roots of plants;
• dry hay;
• loose soil;
• rush the nervousness of the soil.

Some enterprising gardens use rake even to collect berries, such as lingonberries. For this apply a special, with long frequent teeth tool.

Varieties

In practice, both at home and in production purposes are used different types of rake. Conditionally, they can be divided into several types:

• traditional (transverse);

• rake-tailoring;

• fan;

• equestrian;

• rotary;

• for berries.

Rakes for berries are arranged in a special way. Best of all, they are suitable for collecting lingonberries. The product is a cross between robbles and a scoop. The teeth in them are thin and planted close to each other. Such a device makes it possible to assemble the harvest of berries with bushes with convenience and practically without loss.

Materials manufacturing

Currently, in retail trade, you can find a variety of kinds of gardening inventory, including Rabel. They are relatively inexpensive, but those who wish to save money can make this device on their own. The process of manufacturing is simple and practically every dacket or a gardener can cope with it.

For the manufacture of the product, the following materials are used:

• iron, which is subsequently painted with anti-corrosion products;
• steel;
• aluminum;
• plastic;
• plastic;
• wood.

The most durable and durable will rake from steel. However, they have one drawback - they are heavy.

So that the heavy weight of the product does not prevent work, it is better to choose an aluminum option.Perhaps such a rake will serve a little less, but the hands will not be tired of them. Products from plastic or plastics are considered comfortable and easy, but for a long time they will not serve. Alternative to them will be wooden products.

Rake do it yourself

Those who decided to make a rake independently will immediately understand that this is a labor instrument consists of only two parts: a cutlets and a transverse plank planted on it.

Trenok

The cuttings are made mainly of wood. To do this, most often use:

• pine, which is not afraid of moisture, besides enough durable and easy;
• birch, easy processing and having a small weight;
• bech, famous for good strength, but requiring additional processing;
• oak, which is although durable, but only strong men will be able to use it because of heavy weight.

At the factory production, with the presence of the necessary equipment, a smooth round pair of 3-4 cm thick is cut out of these breeds of wood, and it is well cleaned. For household production Rables can apply the trunk of the young tree of the above varieties, cutting out the cutting of the required length from it.

The finished segment of escape is sharpened on the one hand and sand the other cut. You should not paint or clean the cutter, as it will slide and turn in your hands when used.

Cross working surface

At home, it is easiest to make the work surface of a robrel from a tree. For this, the same types of wood are suitable, which were considered in the manufacture of the holder. For a better quality result, it is best to pre-make a drawing of the intended model. So it will be easier for you to navigate in the execution process.

The process of manufacturing a plank with teeth consists of several consecutive steps.

• From the bar, a width of 5 cm should be made a block with a height of 3 cm and a length of 50-60 cm.
• On her center from the width of the plank, make a hole, the diameter of which will coincide with the diameter of your cutting.
• With a thick drill, do in the workpiece for the working surface of the hole in the width of the block. The distance between them should be 35-40 mm.

• Of suitable material Make billets for teeth 10-11 cm long and diameter equal to the width of the prepared teeth.
• For ease of use, each tooth needs to be fired on one side.
• Insert the teeth into the hole prepared for them with the blunt end inside the plank and fix the screws from the height of the block.

Insert the prepared cuttings for the holder and secure it with a screw. A ready-made working surface must be painted or treated with another material for wood that prevents the penetration of moisture into the wood.

Homemade transverse rakes are ready. They will suit you to collect foliage, hay, for the cleaning of lawn. With low loads and proper care, the tool will serve with benefits for a long time.

Homemade rake-tail

Currently, many farmers who have to handle large areas land plotsUse motor blocks. This unit is considered universal, because with it you can automate and transport the cargo, and harvesting, and soil loosening. There is an opportunity to connect to such mini-tractors and rake-tailorings. Make them at home will not be a lot of work. It will only be enough to build only three metal wheels.

In order to make a rake of a bearing for a motoblock, you need to prepare:

• metallic rack for frame;
• brackets that will be attached wheels;
• durable steel wire in order to make grinding springs;
• a couple of bearings that need to be attached to the hub to install the wheels;
• steel sheets with a thickness of 4 mm, of which working wheels will be performed.

We also need items for the hitch, with which the product will further be attached to the motoblock. In the manufacture of an aggregate, do not forget about safety techniques. In the case of incorrectly performed work, not only a mini-tractor can suffer, but also a person.

Rake - an important, indispensable element of garden inventory.With their help, you can perform many works. Which rakes to choose to work on garden plot - Establish you, but you should know that the tool is selected based on the types and volume of the functions that they will perform.

About how to make garden fan rakes, look in the video below.

Hello expensive reader. I have eight types of robble in the farm, but the most convenient and efficient - homemade, which took me from the previous hostess at home. First, they are reliable, secondly, they have optimal weight, thirdly - a long teeth - 85mm. At least, I have never met rake better. They are harmful. Since the rake did not do, I can assume that they were made in the forge, because no trace of welding was found. I will tell you how my friend repeated this design.

Cut a strip of 430mm long steel. Split corners. Bend (see photo). In accordance with the drawing, openings with a diameter of 5.8 mm are placed and drilled. On the one hand, the hole is cencing for welding. The workpiece heat the hot and the holes are clogged in advance of the teeth. When all this is cooled, the rear tips of the teeth are welded to the strip. Next, we take a segment of the pipe and we do the cutting length of 80mm (in size 200mm sculp then). In order not to forget the drill hole for mounting the handle. Heat the propylened end of the hot and form it in accordance with the photo. On the cold dilute the ends of the pipe for such an corner is unlikely to succeed. In conclusion, scuffing the necessary part of the pipe, all this is welded with each other. Welder is more convenient: a strip with teeth stick into the ground, a wooden stalk is inserted into the tube, and correctly placing the components - weld. Rake is ready. Make - you will not regret. Yes, even if a pipe with a seam is falling, then they cut the seam on the seam, and then later when deforming the pipe, it may disperse. Bye. K.V.Yu.