Edged board in 1 cube, how many pieces. Calculation of lumber in one cube
Meters are linear, square and cubic. Starting a large construction site or even small repair, you should clearly navigate in these terms. The ability to correctly translate the amount of certain materials into linear or cubic meters will serve as an excellent service in preliminary calculations of the cost of planned repairs or construction. For example, clearly understanding how much square meters in one roll of wallpaper, you can quickly calculate the amount required for pasting a room or an entire apartment.
Calculations can be done in cubic meters, square meters or running meters
If the upcoming repair or construction is related to the use of wooden materials, it is necessary to thoroughly study the recalculations from running meters to cubic meters, since prices can be presented on the market, both per unit of material and per cubic meter. The amount of timber in a cube varies and depends on its section. The easiest way to find out how many boards are in a cube is a table, but if it is not nearby, you will have to remember the formulas.
What is a cubic meter
A cubic meter (abbreviated as m³) is a unit of volume and is equal to the volume of a cube with an edge length of 1 meter. In accordance with GOST 8486-86 wood materials must have measurable cross-sectional dimensions and lengths, so that you can easily calculate the number of boards included in a cube of material.
To determine the dimensions of the section, it is necessary to retreat from the end of the beam at a distance of at least 10 cm and measure the width and height of the beam. Multiplying these values by each other, you get the cross-sectional area of the beam, multiplying by the length you get the volume of one bar. Having calculated the number of beams in one cubic meter, you can easily navigate between the cost of one beam and one cube of beams.
A cubic meter is equal to the volume of a cube with an edge side of 1 m
Calculation of lumber for construction before purchasing
Of course, the easiest way is to come to the developer to explain what you want to see in the final version and agree to the proposed project. But, if you independently figure out the calculations of the required amount of lumber, then even at the stage of discussing the cost of materials and work on the construction of a house, you can find out how much the real prices are offered by the construction company.
Many developers calculate required amount material in cubes, some consider by the piece, taking as the standard the running dimensions of length - 6 or 12 m. A clear understanding, for example, how many timber in a cube 150x150x6000, will protect against overpayments.
Standard timber 0.15x0.015x6 meters
The procedure for calculating the amount of timber in a cube
Despite the same calculation principle, there are certain nuances in determining the volume and quantity of various lumber.
1. Basic formulas for calculating the number of bars in a cube
To determine how many boards are in a cube, with beams of a certain section, you need to know three measured parameters: length, width and height. First, you need to calculate the volume of one bar according to the formula V = a * b * l (here V - volume, m³; a - height, m; b - width, m; l - length, m)
Bar parameters: length, width, height
How many pieces of timber in a cube is determined by the formula:
Where, A is the number of timber in a cube, pcs;
1 - one cubic meter, m³;
V is the volume of one bar, m³.
2. How to determine how many pieces are in a cube of 100x150 timber
For convenience, the price lists of construction companies indicate the cross-section of the timber, that is, its width and height, for example, 100x150. Where 100 is the width in millimeters and 150 is the height. The length is most often 6 meters, or 6000 mm.
The volume of the timber 100x150x6000 will be 0.09 m³.
V = 0.1 m * 0.15 m * 6 m = 0.09 m³. Here 0.1 is the width, m; 0.15 - height, m; 6 - timber length, m.
In this case, how much material will "fit" in one cubic meter can be found by dividing a cubic meter by the volume of one bar:
Where, 1 - one cubic meter, m³;
0.09 - the calculated volume of one bar 100x150x6000, m³.
The characteristic shape of the section of the bar 100x150
So you can easily calculate how many pieces of timber are in the purchased volume of material by multiplying the number of pieces by the number of cubes. For simplicity and speed of calculation, you can use the table: how many timber in a cube the table is 6 meters.
3. How many edged boards in 1 cube
The situation is similar in calculating the amount of edged boards in 1 cubic meter of wood. For example, the used board has the following parameters 100x25x6000 (width, height, length).
The volume of one board will be 0.015 m³.
V = 0.1 m * 0.025 m * 6 m = 0.015 m³
Quantity in 1 cube:
That is, there are at least 66 boards in a cubic meter. When buying a cube of edged boards 100x25x6000, you should get 67 pieces, rounding up. For example, buying three cubes should end up with at least 201, and buying six - 401.
4. How many grooved floorboards in 1 cube
Sheet pile floor for better editing has a groove along the entire length on one side and a thorn on the other. When calculating the volume of one board, its length, height and net width are taken into account, that is, the width excluding the protruding spike. For example, the size of the board shown in the figure below is 28x90 mm.
Grooved floor board
With a board length of 6 meters, its volume will be:
V = 0.09 m * 0.028 m * 6 m = 0.01512 m³
Quantity in 1 cube:
5. How many wooden lining in 1 cube
By design, the lining vaguely resembles a tongue-and-groove floor board. It also has a tongue-and-groove connection, ventilation grooves, but the front side of the lining can have bevels, roundings and even a convex surface, imitating a bar.
For the calculation, the "net" width is used, that is, the size without taking into account the spike, the maximum value in the section of the board is taken as the height.
Types of lining with a clear example of measuring the width and height of the board
The most common lining size is 100x14. With a board length of 6 meters, the number of lining in one cube will be at least 119 pieces:
Volume of one board:
V = 0.1 m * 0.014 m * 6 m = 0.0084 m³
Quantity in 1 cube:
On our site you can get acquainted with the most popular projects of houses made of profiled timber from construction companies presented at the exhibition of houses "Low-rise Country".
What else to consider when counting lumber
One of the nuances in the production of lumber is their technological length, that is, the declared six-meter board in practice turns out to be 5-10 cm longer. This deviation is called technological and is not taken into account when calculating the running meters of the board. The seller in no way has the right to add them to the total length of the board.
When buying a beam of a certain section, it is important to measure the parameters during acceptance or loading, since the slightest deviation even of 1 cm leads to huge losses, especially with large purchase volumes.
In addition to the volume, it is important to remember the weight of the purchased material, which depends on the density of the material and moisture content.
An example of calculating the weight of a bar based on the known density of a tree (for material of different moisture content, the corresponding values must be substituted instead of 860)
Tables for quick calculation of the volume of the cant
Below are cheat sheets to quickly find out how much timber is in a cube - the table contains not only the quantitative values of units of material in a cubic meter, but also the volumetric values of beams of different sections. For example, the table will show how many boards are in a cube - 6 meters or 3 meters long will be a board or timber.
1. How much timber is 3 meters long in a cubic meter
| How many pieces per cubic meter | Volume of one piece, m³ | |
2. How much timber 6 meters long in a cubic meter
|
Height, width and length of timber, mm |
How many pieces per cubic meter |
Volume of one piece, m³ |
If you need to find, for example, how many 100x100 timber in a cube, then in the table we look for a board of the required size and we see the result - at least 16.67 pieces, and the volume of one timber 6 meters long is 0.06 m³.
On our website you can find contacts of construction companies that offer a house design service. You can communicate directly with representatives by visiting the Low-Rise Country exhibition of houses.
3. How many boards are 2 meters long in a cubic meter
|
How many pieces per cubic meter |
Volume of one board, m³ |
The area of one board, m2 |
||
4. How many boards are 3 meters long in a cubic meter
|
Height, width and length of the board, mm |
How many pieces per cubic meter |
How many running meters in one cubic meter |
Volume of one board, m³ |
The area of one board, m2 |
5. How many boards 6 meters long in a cubic meter
The approximate number of boards in a cube, a 6 meter table shows the following:|
Height, width and length of the board, mm |
How many pieces per cubic meter |
How many running meters in one cubic meter |
Volume of one board, m³ |
The area of one board, m2 |
When transporting materials, it is important to know not only the length of the unit of the product, but also the total weight of the transported cargo, since the carrying capacity of the vehicle is limited by its design features.
6. How much timber is 150x150 in a cubic meter - calculations of weight and volume
|
Height, width and length of timber, mm |
How many pieces per cubic meter |
How many running meters in one cubic meter |
Volume of one piece, m³ |
Weight of one piece, kg (humidity 20%) |
Video description
For an example of calculation, see the following video:
Estimated difference in the price of timber 150x150 in different regions
The cost of timber depends on the region of the country, wood species, material moisture, delivery method and many other factors. For comparison, data was taken for a bar 150x150x6000. The breed of material is pine. The cost of one cube is shown in the table.
Table. The cost of 1 cube of timber is 150x150x6000 (pine), depending on the region.
Video description
What to look for when buying, see the following video:
Features of storage of lumber
For the construction of a house made of wood, it is important to store the material correctly so that its moisture content is within 12%, if the moisture content is higher, then the shrinkage of the building will take place more slowly.
Here are a few rules to remember when storing lumber:
The storage area must be level and dry.
To prevent the ingress of moisture from the surface, pallets are placed under the first layer of material on the site, which can be replaced with cut boards or sleepers.
The distance between individual items should be kept within at least 2 cm for better air circulation.
After 1-2 rows, crossbeams are placed across the length, which can be all the same trims of boards.
If it is not possible to erect a canopy above the storage area to prevent the ingress of atmospheric precipitation, the stacks are covered with foil, excluding wrapping the ends, so as not to create a greenhouse effect inside.
Wood stacked for storage
Conclusion
Knowledge of the rules for calculating the required volume of building materials will help save time and money, or just make sure the developer is honest. Therefore, if you do not have the skills to quickly translate some values into others, then when discussing the required amount of building materials, you must keep at least a cheat sheet in the form of a cubic table with you.
Beams and boards are one of the oldest building materials, but they do not lose their relevance today. At the same time, the cost of these sawn timber makes buyers pay close attention to the accuracy of calculating their required amount.
Now you can find the necessary tables for calculating the required number of cubic meters of building materials on the world wide web, but a skilled owner must be able to carry out the calculation on his own.
How many boards in a cube are 50 x 150 x 6000
As you probably already understood, the calculation of lumber is carried out in cubic meters. At the same time, a cube of boards and beams may have different dimensions. Therefore, for an accurate purchase, you need to understand the size of this cube for a more accurate calculation. The most common cube of lumber has dimensions of 50x150x6000 mm.
We calculate the required volume easily and simply
It is very easy to calculate the cubic meters of a board or timber. To do this, you need to have basic knowledge of geometry, which we were told at school. Thus, to determine the required cubic capacity, you need to initially multiply the indicators of width (l), thickness (s) and length (b).
For instance: s boards × l boards x b boards = 50 mm × 150 mm x 6000 mm = 45000 cm / cube.
We remember that a cubic meter is equal to 1,000,000 cubic centimeters, that is, 100 cm x 100 cm x 100 cm.
1000000 cc / cm: 45000 cc / cm = 22.22 pieces boards in one cube.
How many boards in 1 cube table 6m:
| Board size | 1st board volume | Planks in the 1st cube in pieces | Square meters in the 1st cube |
|---|---|---|---|
| Fifty | |||
| Board 50x 100x 6000 | 0.03 m³ | 33 pcs. | 20 m² |
| Board 50x 120x 6000 | 0.036 m³ | 27 pcs. | 20 m² |
| Board 50x 150x 6000 | 0.045 m³ | 22 pcs. | 20 m² |
| Board 50x 180x 6000 | 0.054 m³ | 18 pcs. | 20 m² |
| Board 50x 200x 6000 | 0.06 m³ | 16 pcs. | 20 m² |
| Board 50x 250x 6000 | 0.075 m³ | 13 pcs. | 20 m² |
As you can see, it is very easy to calculate the required amount of a 6-meter board. Now you know how to determine how many meter boards are in a cube. Depending on the size, you simply plug the desired dimensions into a simple formula and get the finished result.
We will send the material to you by e-mail
Starting construction, any home master once faced with the need to purchase boards. And this is where the fun begins. Having calculated the necessary square by the width and length, the beginner grabs his head - what to do? After all, such material in construction markets is sold by volume, and not by area. Today we will try to figure out how many boards are in a cube (a table of average values will also be provided by us) and how to make all the calculations on our own. Also at the end of the article there will be an online calculator that will allow you to perform all the necessary calculations without unnecessary problems.
It is important to know not only the size of the lumber, but also its volume.
Everyone understands that how many cubic meters will be needed for a particular construction will depend on the shape and size of the lumber. But first you need to understand what types and types of material can be found. The main ones are:
- Edged timber;
- Sliced timber;
- Sliced bar;
- Edged bar;
- Edged and floor boards;
- Unedged materials.
Each of these types has its own characteristics and is used in its own field. For example, you can't build a frame without it, but sheathe a wall with it is the height of irrationality. For this, now we will consider each of these types separately.
Edged timber and its scope
Edged timber is used in cases where during appearance aesthetics are not so important. It may have cracks that occur during the drying process after processing. It is made by cutting out the central part from a regular log, and only after that it undergoes minimal drying. Such lumber, although considered expensive, is still cheaper than planed products.
Sliced timber: what is the difference from edged timber
The differences are fundamental. If no preparation of the log is required for the manufacture of the previous version, then for planed it is pre-dried, and only after that it goes to the sawmill. The surface of such a product is smooth and polished. A beam of this type can even become a good decor element. Simply put, if it is necessary to build walls for decoration, it is purchased edged timber, but planed finishing does not require. It can be simply varnished. If we talk about strength, then it is less for a planed product.
Sliced bar - what are its differences from a bar
In essence, they are one and the same, the difference here is only in size. The bar has a lower rib height, which means that it is not suitable for the construction of frames of buildings or residential buildings. More often this material is used for decorative purposes. It also finds application in the installation of frames for interior decoration of premises or reinforcing lintels of various wooden panels. The difference between edged and planed timber and the same types of timber is the same.
Edged and floorboard: their features and differences
The differences between these lumber are also noticeable at first glance. The edged board is not cut. It has an even shape, but, at the same time, it is in no way suitable for fine finishing. In contrast, the genital has three smoothly processed edges (except for the lower wide one) and often has a groove on the narrow sides on one side and a spike on the other. This is done for a more tight connection between them, as well as to reduce loads and eliminate deformation of the floor during operation.
Unedged materials - what they are
These are the cheapest products. When sawing a log, only two opposite sides are cut. Thus, the edges of the boards are uneven. Most often, such lumber is used for rough construction.
How many boards per cubic meter: table of standard sizes
Some people ask an interesting question - how many square meters are in a cube. In fact, it cannot be answered! Indeed, in order to determine this, you need to at least know the thickness of the board. Without this parameter, no calculations will work. Let's try to figure out how to calculate the cubic capacity.
This does not present any big difficulties, but it requires care. We need to understand how many boards are in the cube. And for this you need to calculate the cubic capacity of one of them by size. For example, a board with a section of 1000x250 mm and a length of 4 m.Then the calculations, after converting the units of measurement into meters, will be as follows: 0.1 × 0.025 × 4 = 0.01 m 3. This will be the answer to the question of how to calculate the cubic capacity of the board.
How many boards in a cube: table of average values
For example, there are boards with certain dimensions. How to calculate a cube of such lumber by the number of boards? You can use the following table:
| Board size, mm | Volume of 1 board, m3 | Number of boards in 1 m3, pcs | Overpayment amount rounded down,% |
|---|---|---|---|
| 25x150x4000 | 0,015 | 66,7 | 1 |
| 40x150x4000 | 0,024 | 41,6 | 0,7 |
| 20x100x6000 | 0,012 | 83,3 | 2,8 |
| 25x100x6000 | 0,15 | 66,7 | 1 |
| 40x100x6000 | 0,024 | 41,6 | 0,7 |
| 50x100x6000 | 0,03 | 33,3 | 1 |
| 25x150x6000 | 0,025 | 44,4 | 1 |
| 30x150x6000 | 0,027 | 37,04 | 0,01 |
| 40x150x6000 | 0,036 | 27,8 | 2,9 |
| 50x150x6000 | 0,045 | 22,2 | 0,9 |
| 25x200x6000 | 0,03 | 33,3 | 1 |
| 40x200x6000 | 0,048 | 20,8 | 3,8 |
| 50x200x6000 | 0,06 | 16,7 | 4,2 |
It's important to know! To calculate how many square meters are in a cubic meter, you need to know all the dimensions of the board. Without information about the length, width and thickness, nothing will work.
Average values of weight at different humidity
| Name of the breed | Raw, kg / m3 | Dry, kg / m3 |
|---|---|---|
| Birch | 880 | 650 |
| Oak | 990 | 720 |
| Spruce | 710 | 450 |
| Cedar | 700 | 440 |
| Larch | 840 | 670 |
| Linden | 750 | 500 |
| Aspen | 750 | 500 |
| Pine | 810 | 510 |
| Ash | 960 | 700 |
It turns out that one cube of ash will be much heavier than the same volume of linden. This should be borne in mind when planning transportation.
How to correctly calculate the amount of material
Let's consider how to correctly calculate how many pieces of boards will be in one cubic meter. This is done using the following formula:
1 m 3 / (L × h × b) = N pieces , where
- L - the length of the board;
- h - width;
- b - thickness.
As you can see, the calculations are not at all complicated.
Helpful information! If they say that an inch board is needed, its size will be as follows: width - 75-250 mm, length - 2000-6000 mm, but the thickness is always standard - 25 mm. Often this size name can be heard in the construction markets.
Board cubic capacity calculator or how to make calculations easier
The very algorithm of actions how to calculate a cubic meter by quantity is probably now clear. But there is not always a desire to engage in various calculations. And it's quite easy to make a mistake here. Now we will tell you how to calculate a cube board without making complex calculations.
For such cases, there are special programs called cubic meter calculators. How are they convenient? The main convenience of such programs is their accuracy. The calculator for calculating a board in a cube is devoid of the human factor, which excludes the possibility of errors in the calculation process. Another rather weighty argument in its favor is the speed of computations. You just need to enter the correct data in the appropriate fields and click on the "calculate" button. Nothing more is required from the user. The online calculator of planks in a cube will instantly give a result for the number.
To simplify the calculation, we have prepared a summary table for you. The tables below show data on the volume of one bar and how many pieces of bars of different sizes are in the 1st cube. To make it convenient for you.
How many pieces of edged and profiled timber in 1 cube table
| Dimensions (edit) , mm | Volume of boards in 1 m 3 | Number of boards in m 3 |
| 100x100x6000 | 0.06 m 3 | 16 pcs. |
| 100x150x6000 | 0.09 m 3 | 11 pcs. |
| 150x150x6000 | 0.135 m 3 | 7 pcs. |
| 100x180x6000 | 0.108 m 3 | 9 pcs. |
| 150x180x6000 | 0.162 m 3 | 6 pcs. |
| 180x180x6000 | 0.1944 m 3 | 5 pieces. |
| 100x200x6000 | 0.12 m 3 | 8 pcs. |
| 150x200x6000 | 0.18 m 3 | 5 pieces. |
| 180x200x6000 | 0.216 m 3 | 4 things. |
| 200x200x6000 | 0.24 m 3 | 4 things. |
| 250x200x6000 | 0.3 m 3 | 3 pcs. |
| 250x250x6000 | 0.375 m 3 | 2 pcs. |
| 250x300x6000 | 0.45 m 3 | 2 pcs. |
| 300x300x6000 | 0.54 m 3 | 1 PC. |
How to calculate how much timber is in 1 cube?
We offer a simple calculation so that you do not get lost with the question of how to find out how much timber is in a cube. These calculation options are suitable if you know the dimensions of the timber. For example, let's take a beam 260 x 260 x 6,000 mm (6 meters). The same can be done for a bar measuring 3 meters, 4 meters, 5 meters.
The formula for calculating the volume of a bar:
100mm 100mm 6000 mm = 0.1m 0.1m 6m = 0.06 m 3
The formula for calculating the timber in pieces:
Timber length - 6 meters
1m 3 / 0.06m 3 = 16 pcs / m 3
Hard? It seems to be not! But if the calculation causes you difficulties, just use our table. The table contains the calculation for all known beam sizes, which are given in GOST 8486-86.
The page contains answers to simple questions from people:
- How many timber
- How many cubes of timber
- How many pieces of timber cube
- How much timber is needed
- How many in one cube
- How many pieces in a cube
- How many bars in a cube
- How to calculate how much timber is in 1 cube
Why know how much timber is in 1 cube?
There are two reasons for this:
- You can immediately calculate the total price of the volume of timber you need. To do this, you need to know the volume of 1 piece of timber, the price for 1 cubic meter and how many pieces will be needed to implement your plans.
- You can calculate the total number of timber units needed to complete the project. And this can be done, knowing how many cubes are required for work, and calculating the number of pieces of timber in 1 cube.
When implementing construction works for the construction of a residential building, a specialist needs to perform a large number of various tasks, some of which are: drawing up and calculating the estimated cost before the final finishing of the premises of a residential building. It is imperative to calculate the required amount of various building materials, which is quite difficult to do. Therefore, such knowledge - how many boards are in a cube - is very important for a specialist who is engaged in the construction of a residential building and wants to do the work as efficiently and quickly as possible in time.
Buyer's club: existing types of boards
To calculate exactly how many pieces of board are in a cube, you need to know not only what exactly a board cube means, but it is worth understanding important point that exist different kinds boards and what is the opportunity to purchase on the modern market for a variety of construction work. It should be noted that the cube of almost all materials, regardless of the type of material, is calculated in the same way, that is, according to one specific method. The types of boards have no influence on the calculation of the cubic capacity of this building material.
The unpunched type of lumber are: timber, various edged boards, as well as unedged boards (they are an exception when calculating the cubic capacity, because this process is a little different). The grooved types (which have special grooves for the implementation of the joint) include: modern lining, blockhouse, floor material, as well as imitation of natural timber. When you choose a grooved type of building material for purchase, then you will need to draw your attention to the fact that when calculating, only the working width of the board without a spike is used. If we talk about a blockhouse (imitation of a log), then when calculating the cubic capacity, only the thickness at its highest point is taken.
What is the number of boards in 1 cube: calculation
Any person, even from his school days, understands how the calculation of the cubic capacity is made. For this procedure, it is necessary to calculate quantities such as length, width and height. A similar principle is used to calculate the cubic capacity of 1 board. When performing such calculations, it is recommended to convert all available values to meters. Cubic capacity of 1 board, which has a section of 150x20 mm. and a length of 6 m, it is calculated as follows: 0.15 is multiplied by 0.02 and 6, so that the cubic capacity of this board will be 0.018 cubic meters.
Let's apply the volume formula V = L * h * b (where L is the length, h is the height, b is the width).
L = 6.0; h = 0.02; b = 0.15.
Thus, V = 6.0 * 0.02 * 0.15 = 0.018 m 3.
To determine how many boards are in one cube: divide 1 m 3 by cubic capacity (the volume of one board).
1 m 3 / V = N pcs.
1 m 3 / 0.018 m 3 = 55.55 pcs.
Thus, the number of boards in one cube is 55.5 pieces.
It is quite easy to find out the cost of a certain type of board when the values of its volume are known: 0.018 is multiplied by the price of 1 cubic meter. When 1 cube of a certain type of board has, for example, a cost of 5500 rubles, then the cost will be 99 rubles. At this point in the calculation, there is some trick of sellers and managers in hardware stores, because the volume of the material is rounded up to some whole values.
Such rounding can lead to such a moment that the price of 1 board (when 1 cube costs 5500) will be completely different values. In addition to all this, it should be noted that for various boards for construction, which have a nominal length of 6 meters, in fact, the length is 6.1 - 6.2 m, which is not taken into account when selling this building material. This also applies to the acquisition of a significant number of boards. This is quite clearly seen if, for example, a 150x20 mm board is used. The number of boards in a cube is 55.5 pieces. But, in a cube, 55 pieces are considered, that when the calculation is made, there will be a value of 0.99 cubic meters. In fact, it follows from this that the overpayment for 1 cubic meter of this popular building material can be 1% of the real price. For example, 5500 instead of 4995 rubles.
To calculate the cubic capacity for a non-cut type of board, slightly different methods are used. When it comes to buying 1 board, then the measurement of its thickness, as well as the total length, is carried out in the same way as when choosing an edged building material. In this case, the width for calculations is taken as an average - between a large value and a small one.
For example, when at the end the width of the board is 25 cm, and at the other 20, then the average value will be approximately 22 centimeters. When it is necessary to calculate the volume of a significant number of such boards for construction, then it will be necessary to expand them so that the wide one does not differ from the narrow one, more than 10 cm. The main length of this material in the unfolded pile should be approximately the same. After that, using a regular tape measure, an accurate measurement of the height of the entire available stack of boards is made, the width is measured (approximately in the middle). The result obtained will then need to be multiplied by a special factor, which is a value from 0.07 to 0.09, in direct proportion to the existing air gap.
How many boards are in 1 cube: special tables
To calculate exactly how many boards of a certain width, length in 1 cubic meter, various tables are used. Below are several such specialized tables, which indicate the cubic capacity of the types of this material common and in demand today. Calculate the volume of various boards that have different sizes, for example, material for erecting a fence on your site, it is possible to independently, using the existing formula, which is presented above.
Table of the number of edged boards in 1 cubic meter
| Board size | Volume of the 1st board (m 3) | Number of boards in 1m 3 (pcs.) | Number of square meters in 1m 2 |
|---|---|---|---|
| Twenty | |||
| Board 20x100x6000 | 0.012 m 3 | 83 Item (s) | 50 m 2 |
| Board 20x120x6000 | 0.0144 m 3 | 69 pcs. | 50 m 2 |
| Board 20x150x6000 | 0.018 m 3 | 55 pcs. | 50 m 2 |
| Board 20x180x6000 | 0.0216 m 3 | 46 pcs. | 50 m 2 |
| Board 20x200x6000 | 0.024 m 3 | 41 Item (s) | 50 m 2 |
| Board 20x250x6000 | 0.03 m 3 | 33 pcs. | 50 m 2 |
| Twenty-five | |||
| Board 25x100x6000 | 0.015 m 3 | 67 pcs. | 40 m 2 |
| Board 25x120x6000 | 0.018 m 3 | 55 pcs. | 40 m 2 |
| Board 25x150x6000 | 0.0225 m 3 | 44 pcs. | 40 m 2 |
| Board 25x180x6000 | 0.027 m 3 | 37 pcs. | 40 m 2 |
| Board 25x200x6000 | 0.03 m 3 | 33 pcs. | 40 m 2 |
| Board 25x250x6000 | 0.0375 m 3 | 26 pcs. | 40 m 2 |
| Thirty | |||
| Board 30x100x6000 | 0.018 m 3 | 55 pcs. | 33 m 2 |
| Board 30x120x6000 | 0.0216 m 3 | 46 pcs. | 33 m 2 |
| Board 30x150x6000 | 0.027 m 3 | 37 pcs. | 33 m 2 |
| Board 30x180x6000 | 0.0324 m 3 | 30 pcs. | 33 m 2 |
| Board 30x200x6000 | 0.036 m 3 | 27 pcs. | 33 m 2 |
| Board 30x250x6000 | 0.045 m 3 | 22 pcs. | 33 m 2 |
| Thirty-two | |||
| Board 32x100x6000 | 0.0192 m 3 | 52 Item (s) | 31 m 2 |
| Board 32x120x6000 | 0.023 m 3 | 43 Item (s) | 31 m 2 |
| Board 32x150x6000 | 0.0288 m 3 | 34 pcs. | 31 m 2 |
| Board 32x180x6000 | 0.0346 m 3 | 28 pcs. | 31 m 2 |
| Board 32x200x6000 | 0.0384 m 3 | 26 pcs. | 31 m 2 |
| Board 32x250x6000 | 0.048 m 3 | 20 pcs. | 31 m 2 |
| Fortieth | |||
| Board 40x100x6000 | 0.024 m 3 | 41 Item (s) | 25 m 2 |
| Board 40x120x6000 | 0.0288 m 3 | 34 pcs. | 25 m 2 |
| Board 40x150x6000 | 0.036 m 3 | 27 pcs. | 25 m 2 |
| Board 40x180x6000 | 0.0432 m 3 | 23 pcs. | 25 m 2 |
| Board 40x200x6000 | 0.048 m 3 | 20 pcs. | 25 m 2 |
| Board 40x250x6000 | 0.06 m 3 | 16 pcs. | 25 m 2 |
| Fifty | |||
| Board 50x100x6000 | 0.03 m 3 | 33 pcs. | 20 m 2 |
| Board 50x120x6000 | 0.036 m 3 | 27 pcs. | 20 m 2 |
| Board 50x150x6000 | 0.045 m 3 | 22 pcs. | 20 m 2 |
| Board 50x180x6000 | 0.054 m 3 | 18 pcs. | 20 m 2 |
| Board 50x200x6000 | 0.06 m 3 | 16 pcs. | 20 m 2 |
| Board 50x250x6000 | 0.075 m 3 | 13 pcs. | 20 m 2 |
Table of the amount of timber in 1 cubic meter
| Bar size | Volume of 1 piece (m³) | The amount of timber in 1m³ (pcs.) |
|---|---|---|
| 100 × 100 × 6000 | 0.06 m 3 | 16 pcs. |
| 100 × 150 × 6000 | 0.09 m 3 | 11 pcs. |
| 150 × 150 × 6000 | 0.135 m 3 | 7 pcs. |
| 100 × 180 × 6000 | 0.108 m 3 | 9 pcs. |
| 150 × 180 × 6000 | 0.162 m 3 | 6 pcs. |
| 180 × 180 × 6000 | 0.1944 m 3 | 5 pieces. |
| 100 × 200 × 6000 | 0.12 m 3 | 8 pcs. |
| 150 × 200 × 6000 | 0.18 m 3 | 5.5 pcs. |
| 180 × 200 × 6000 | 0.216 m 3 | 4.5 pcs. |
| 200 × 200 × 6000 | 0.24 m 3 | 4 things. |
| 250 × 200 × 6000 | 0.3 m 3 | 3 pcs. |
Table of the number of unedged boards in 1 cubic meter