How to fix fabric sofa upholstery. How to sew a leather sofa: several ways to update furniture

Do-it-yourself sofa repair in classic style

At home, wear and tear on furniture is inevitable. The solution to the problem can be the restoration of the sofa with your own hands. Most often, external elements require replacement, regardless of the type and quality of the material. The fabric fades in the sun, it is rubbed, the foam rubber loses its elasticity and sags.

Padding and minor repairs corner sofa do it yourself

Benefits of DIY restoration:

buying material is several times cheaper than new furniture;
preservation of antiques;
choice colors and design, according to personal tastes and the general interior of the room;
independent choice of material for quality, environmental friendliness, cost;
the ability to take into account the weak points of the old sofa, their strengthening.

Broken sofa folding mechanism

In addition to external wear, internal breakdowns occur over time. A creak appears somewhere, the folding mechanism does not work, the springs break through.

Repair internal filling sofa - replacement of springs

Lubricate the creaking parts of the folding mechanism

The wooden base may crack, break. In order for the restoration of an old sofa with your own hands to be of high quality, you need to know its approximate structure and repair methods.

Cracked bar - part of the base

Base sleeping place requiring replacement

Restoration of the Soviet sofa - new life for old furniture

Conventionally, the sofa can be divided into four parts. This is a wooden base made of solid wood and chipboard, steel springs and a folding mechanism, filler (foam rubber or batting) and upholstery (fabric, leather, leatherette), decorative elements (wooden plates, buttons).

The process of stretching a soft sofa step by step

There are several ways to restore a sofa with your own hands, depending on the complexity:

minor repairs of upholstery and decor;
complete replacement of the upholstery (hauling);
replacement of upholstery and filler;
replacement of upholstery, filler, repair of mechanisms;
complete repair of all parts.

Repair of the spring mechanism, replacement of the filler and upholstery of the sofa-couch

Do not get down to business when it comes to antiques, or the old sofa has complex structural elements. It is also better to entrust work with capricious materials, such as leather, to professionals, or change the material to fabric.

Conversion of a leather sofa after restoration by specialists

Required materials and tools

Tools and materials required for repair upholstered furniture

Restoring an old sofa will take time. It is a creative process that requires desire, tools and good stuff... Everything you need to repair a standard 180 * 90 sofa is shown in the table. The purchase of filler and fabric for upholstery is best done with a margin.

DIY materials and accessories for repairing a sofa

The following tools may be required:

construction glue;
furniture stapler;
strong nylon thread, and a needle to it;
spanner key, pliers, screwdriver;
jigsaw, as a last resort, an ordinary saw (if chipboard replacement is required).

Variety of tools for furniture repair

Cut the fabric into a cover in advance. Sewing dense elements is difficult, so the production of the material can be ordered by a seamstress. In order not to be mistaken with the sizes, use the old fabric as a template. When cutting, be sure to leave 5-10 centimeters, for fastening, take into account the height of the seat (width of the back).

Restoration process: step by step instructions

We check the frame and base of the sofa, make a replacement in case of breakage

Before restoring the sofa with your own hands, you need to check the condition of the main frame. If there are cracked or sagging bars, it is best to replace them. An array of wood rarely requires repair, but chipboard breaks often. It is not worth repairing, here you need to completely replace the broken part.

We drag the lower base of the sofa, take the old upholstery as a template

The repair of the backrest, seat and armrests is slightly different, but in general, the restoration scheme for different parts is approximately the same.

We replace the upholstery on the inside of the armrests, replace the filler and sew a new cover

First of all, you need to carry out dismantling work:

remove the side armrests (usually the bolts on them are made with inside, here you may need a hex wrench, or pliers);
remove the seats and backs from the fasteners to the lower frame;
remove the old upholstery, remove the staples too;
carefully dismantle the old filler, check for suitability for reuse;
remove the springs, check their condition, if necessary clean, lubricate, replace in whole or in part;
check the condition of the chipboard, replace the sheets if necessary.

We replace the outer part of the armrests and connect both parts together

It is better to put all small parts from parsing into one container so as not to lose.

We fix the upholstery at the base, use a hammer and a stapler if necessary

At the second stage, we replace the old elements. It is best to use both glue and a stapler to hold the parts together. But if necessary, you can get by with handy means. For example, instead of a stapler, use small carnations:

lay a dense fabric on both sides of the spring block, bend the edges inward on each side and sew with nylon thread;
lay the spring frame on a wooden base, fix the springs through the fabric with a stapler. If there is no tool, you can make arcuate staples from steel wire, or from thin nails, hammering the "head" to the side;
put in new, or fit old, filler;
pull off the entire structure with a fastening cloth, in the manner of upholstery, fix it;
put on a new cover, secure with glue and a stapler.

The turn of our wondrous back has come - we are doing the work according to the same principle

The final stage is decoration

We fix the outer part of the sofa, decorate with beautiful legs and decorate with buttons - we get a great new sofa

Do-it-yourself sofa restoration is an interesting activity, as well as decorating it. Here you can simply lay beautiful pillows, or make a carriage tie.

Diy carriage tie for the back of the new Diana

Usually the backs are decorated in this way, leaving the seats solid. The tie elements are simple, you need to prepare buttons, or metal rivets. Cross diagonals can be emphasized with tape. In order for the foam to lie flat, you need to cut out small circles from the filler at the replacement stage - places for future buttons. Then, cover with fabric and sew on the selected elements. You can use a stapler or strong thread to tighten the buttons on the other side.

DIY upholstered furniture repair

If the structure contains elements made of wood, you can glue a figured wooden array in color on the front of the armrests. Then all the pieces of furniture are assembled back. It is important to check all fasteners so that nothing comes off during operation. That's all, the restoration of the old sofa is over!

Restoration of an old sofa - photo before and after constriction

Antique upholstered sofa with wooden elements after restoration

Video: sofa renovation with a design change. sofa restoration. timelapse

There is upholstered furniture in every home. Such interior items are among the most expensive, so it is important to pay a lot of attention to caring for them, because they are not changed every season. The sofa is designed to serve faithfully to its owners for many years. But there are situations in which it is difficult to blame anyone, because anyone can make a mistake and accidentally ruin the upholstery with a drink, food that will leave a greasy stain on the furniture, or a cigarette that will burn it altogether.

We offer you several ways designed to return the sofa to its original appearance and cheer up the mistress of the house, because, on this occasion, it is the fair half that is usually upset.

How to mask a hole in a sofa?

Padding upholstery

If we are dealing with large damage, it is easier to think about than about methods of masking a hole. Today, stretching the sofa, though troublesome, is quite doable. If you know how to handle some tools, have enough free time, have the desire and patience to create, do everything yourself. Otherwise, it is better to entrust this work to a professional and rejoice at the result, without spending a single nerve cell, but paying a substantial sum to the masters for the work.

Cape

Emergency help in case of damage to the sofa can be the purchase of a blanket or cape, which will cover the hole and prevent the hostess from feeling uncomfortable in the presence of guests.

Now let's look at ways to seal small holes in the upholstery. Here you should start from the material with which the sofa will be pulled.

"Liquid skin"

If we are dealing with or a quality substitute, a special solution "liquid skin" is suitable, which is used as follows:

the surface of the sofa should be degreased (moisten a cotton swab with alcohol and wipe the place where the paste will be applied);
gently put the paste into the hole;
press the napkin on top;
iron with an iron.

After carrying out this procedure, the hole should disappear before the eyes, especially if the color has been well matched. How is this possible? The fact is that the paste fills the hole and melts under the action high temperature... This makes the surface of the furniture look solid and undamaged.

Sewing

If the upholstered furniture is covered with one of them, then you can try to sew it up yourself. It is important to understand here that you cannot do without a patch, since if you start pulling the edges of the hole, you can make it even larger. Take a piece of similar material, slide it inside the hole, and sew in a circle. Keep the stitches small and “blind,” and buy a needle and thread designed specifically for this purpose.

Leather upholstery for furniture is considered one of the most the best materials... It combines strength and presentable appearance... But in the process of use, stains and scratches will still appear. It is possible to carry out minor repairs of leather furniture on your own, although much depends on the nature of the damage. If the dirt or defect is not eliminated in time, the furniture will lose the value and color saturation of the upholstery. With scratches and cracks, the situation is even worse - if you do not start repairs in time, then the crack can grow to such a size that it will be easier to buy a new sofa.

To choose the right materials, you should carefully assess the condition of the furniture. This is necessary to understand the nature of the problem and determine how to fix it. Repairing leather furniture may require professional tools that are not advisable to buy for one-time home use.

If we are talking about simple pollution, then it will be enough to prepare a cloth and alcohol. With the repair of cracks, everything is somewhat more complicated. Before starting work, you will need to acquire construction tools - they will be used to disassemble furniture and remove old upholstery. This is a set of screwdrivers, wrenches, screwdriver, pliers, staple removal tool. Changing material involves using a staple gun. This is a basic set of tools.

There are repair options using paint, liquid leather and other improvised means. Therefore, it is worth purchasing them in advance. Do not forget about the filler of the sofa - the material may also need full or partial restoration. Foam rubber often acts as a filler. Be sure to get some thread and a needle. Get the job done faster sewing machine... If a partial or complete replacement of the upholstery is planned, then it will be required a large number new material.

Repair and restoration methods

For leather furniture, stains are less critical than physical defects such as cuts or scratches. There are several main ways of restoring such furniture, aimed at both full or partial restoration of the material, and at hiding defects. The upholstery will not look like it used to, but the scratches will not be visible. The following repair methods can be noted:

Most in a simple way repair of leather furniture using a product called "Liquid Leather" or its equivalent is considered;
The scratch is painted over with varnish or paint, matched to the color of the upholstery. Here we are only talking about disguise;
An application is applied to the damaged area or a patch is sewn on, if the appearance of the product does not suffer from this;
The most difficult and time-consuming process is the complete constriction of the material. It is worth resorting to it only when the repair with liquid skin will no longer help;
Replacement of fittings. In some situations, it is not the upholstery itself that needs repair, but decorative elements or accessories.

Liquid skin

If you have to work with major damage, you will need to fill the void with foam rubber or cotton wool. This area is glued from the inside of the upholstery. Using the table supplied with the liquid leather, you should choose the most suitable color. The damaged surface is cleaned, degreased, after which do-it-yourself leather furniture is repaired. There are no special rules for applying “Liquid Skin” to the surface. The liquid can be applied either with a brush or with a spatula. There is a trick that allows you to give the place restored with the help of the specified tool, the texture from the original material - you must attach a sample from the sofa to the damaged area.

Choosing the desired shade

We clean the coating and apply the composition

Result

Painting

Staining helps in situations where, after long-term use, the furniture has lost its appearance due to wear. In this case, minor cosmetic repairs should be carried out using painting. The paint itself can be produced both in the form of an aerosol and in the form of a spray, respectively, it will be easy to repair leather furniture. First you need to evaluate how the paint matches the color of the upholstery, and, if necessary, mix several shades to obtain the desired color.

The damaged surface is first cleaned of dirt, and then degreased with acetone. It is better to use sprays, they are more convenient to use. The paint should be applied in several layers. It is important that the previous coat of paint is dry before the next coat is applied. To make the paint dry faster, you can use a regular hair dryer.

Choosing paint

We process with acetone

Apply the composition

Painting finished

Padding

The list of items that should be included in the repair kit is described above. To begin with, the sofa is examined, after which the old upholstery is dismantled. The side, back parts of the sofa, as well as the seat, can be removed using a hexagon or a wrench. The staples holding the upholstery are removed with a special tool. The old filler, even if it is in good condition, is best removed for a while in order to assess the condition of the frame. If necessary, the filler is changed to new foam rubber, and the damaged parts of the frame are also changed.

The pattern of the new upholstery should be done with a margin of 10 cm, while focusing on the old upholstery. After all the parts have been cut out, you can start sewing. In the absence of the proper skills, this process can be entrusted to a specialist.

The padding looks like this:

The cut piece is placed on the upholstery of the sofa. It is necessary to arrange the material in the center of the furniture;
The fabric is wrapped around the edges, in parallel with this, the tension of the material occurs;
The upholstery is secured with staples, which must be spaced at least 4 cm apart.

You need to start work from the middle and move to the edges. This will provide an even tension.

Patches

Stripes can solve the problem of scratches. The essence of the method is to cut and stick a piece of leather larger than the scratch itself. The patch should be round, although other shapes are acceptable. The cut out patch is glued to the bottom of the crack. As for the glue, it must be water-based. It is very difficult to find a patch that will not differ much from the main material, but even if you can find such material, the difference will be visible. In this situation, it is worth additionally using paint. The repair is complete when the coloring matter is dry.

We process the surface

Sealing the hole

Making a patch

We glue the patch

Overlays

Repairing leather furniture at home can be done with overlays or appliqués. This method can be called unusual, because it radically changes the appearance of furniture. An overlay differs from a patch in that it is placed on top of the upholstery. The lining serves to inhibit further crack growth. Accordingly, the owner of the furniture realizes that the sofa or chair will no longer have its original appearance. But this can be avoided with a little imagination. With the help of contrasting overlays, you can depict an unusual pattern - it can be an abstract drawing or a specific image. It is better to put the pad itself on glue or sew it on with threads.

Threads and needles should not be used for the reason that they leave marks, which excludes the possibility of rearranging the lining to another place without consequences. The use of glue provides an opportunity for error. As with conventional crack sealing, degrease the desired area before installing the patch.

We wipe the coating

Glue

There is a kind of adhesives that work with leather. You need to look for a tool called universal glue for the skin. The specificity of the process lies in its effectiveness only for small cuts and cracks. Refurbishing leather furniture requires careful application of glue. You can apply the glue with a toothpick, match or similar stick. After applying the glue, press down firmly on the edges of the scratch. You can also pull off these edges with synthetic thread. All excess glue must be removed. It is far from always possible to crank up this procedure imperceptibly, that is, the place of gluing will still be visible. Then the damaged area of the material should be polished and painted.

Any thing eventually falls into disrepair and upholstered furniture is no exception. But in the case of furniture, it is possible to restore its original appearance and properties. This article will discuss self-hauling sofa. How, what and in what order to do, what materials to use.

Damage and types of repair

Damage to a sofa or other upholstered furniture can be of different "severity". Depending on the existing injuries, a different set of work is required. Here's what could be with your furniture:

So stretching the sofa can involve different jobs. From a simple upholstery replacement to a complete renovation, including part of the frame. The most troublesome part is the spring blocks. This is a long and painstaking work. If the "historical accuracy" of your furniture is not important to you, it is easier to replace a failed spring block with foam rubber or (better, but more expensive) furniture silicone. If everything is done correctly, the sofa will become even more comfortable: incorrectly tightened springs cause a lot of inconvenience.

Types of the "soft part"

In general terms, let's talk about what the seat and back of the sofa can be made of. There are options:

Without springs:
- Foam rubber (polyurethane foam, the name PPU is also found) high density(also called furniture).
- Foamed latex. In terms of quality and convenience, it is better than foam rubber, but also much more expensive.
With springs:
- with classic springs tied into one block;
- snake springs that support the foam / latex filling.

These are the most common types of sofa seats. In more expensive models, the spring block can be supplemented with a layer of polyurethane foam or latex, which makes the seat more elastic and comfortable at the same time. When tightening, then they look at the state of both parts, replace or leave - depending on the desire and capabilities.

But these are not all layers. In addition to springs, polyurethane foam / latex, a synthetic winterizer or thermal felt (or ordinary felt) is also laid. This is if the sofa is more or less modern and not too expensive. Older exhibits may contain matting or burlap, batting (or something very similar), horsehair, dried seaweed and other now almost exotic materials for padding the sofa. When repairing a sofa, they will need to be replaced with the same (if there is a desire to search) or similar in thickness and properties. So, in order to understand how the banner of the sofa should be done, first figure out what is inside it.

We disassemble the sofa and evaluate the scale of the work

The stretching of the sofa begins with its disassembly. In the process, you will be able to assess the extent of the damage and decide what exactly you need to do. For this part of the job, you will need:

a large screwdriver to unscrew the visible bolts (if any);
a small flathead screwdriver, pliers, or a staple remover - to remove the staples that secure the upholstery.

The main thing is to remove the old upholstery. Then everything will become clear

Actually, that's all. First, we remove individual pillows, if any, remove the sidewalls. It is difficult to tell here - there are many designs. Look carefully to see if you find something. If you have pull-out parts, you can try to start with them.

Separating the upholstery

The next step is to separate the fabric from the frame. It is stapled to wooden blocks frame. We pry the staples with a flat screwdriver, take them out. Some can sit very tightly, it is easier to pull them out by grasping the raised back with pliers or pliers.

We remove the fabric carefully, trying not to damage it too much. We will then use it as a sample for the new upholstery of the sofa. There are several layers under the upholstery fabric. Maybe felt, synthetic winterizer, some kind of fabric. If the repair of the sofa was started only for the sake of replacing the upholstery, look at the condition of these materials. If there are signs of wear, it is best to replace it. After all, it will be a shame if, after a few months, the sofa's constriction is required again, but already due to the fact that the layers of the lining have been demolished.

Once the fabric has been removed, it’s time to evaluate which parts you will need to change. Everything is clear with the upholstery and lining. It is advisable to keep the pie in the same composition. If old materials were used that are not on sale now or they are too expensive, replace them with modern counterparts. The main thing for folding sofas is to reach the same height of the seat and backrest, which were before, since the folding mechanisms are designed for certain parameters of the "pillows". In order not to be mistaken with the thickness of the materials, find the unworn (or least worn) areas and measure the thickness.

We estimate damage

This stage is necessary if the seat of the sofa is uneven, there are humps and depressions, protruding springs (and below too). In seats that consist only of foam rubber, everything is simple: they usually go for replacement. They can be made of high-density foam rubber by folding several layers, you can order ready-made foam rubber in a store that sells furniture spare parts. It is prudent to order a latex mattress according to the exact measurements (measured after the fabric and all layers have been removed).

If there are springs in the sofa, after removing all the covering layers, we get to them. If there are no burst springs, the frame and its connections are strong, without backlash and cracks, the substrate for the springs is in a normal state, you can stop at this. We change the covering layers, sew a new cover, stretch and fasten. This completes the stretching of the sofa.

One of the most common defects of spring blocks is a broken spring. There are also such sofas - with spring snakes, which are attached to the frame and give elasticity to the foam mattress standing on top

If there is any damage from the above, the spring block will have to be separated. It is attached to the frame frame using U-brackets or nails. Now you have completely disassembled your sofa into its components. Next is the replacement and repair of damaged parts, and then reassembly.

The classic spring block sofa pie and possible problems

To understand how to repair a sofa at home, you need to know which layers of materials and in what sequence are needed. For example, in a sofa seat with a spring block, the sequence will be as follows (from bottom to top):

Plywood or timber frame... The plywood frame is more reliable, but it is longer and more difficult to make. Therefore, pine blocks are usually used. They are connected according to the thorn-groove principle, gluing the joint with wood glue. If desired, the connections can be reinforced with dowels or corners (aluminum).
Spring block base... There may be options: lamellas (strips of elastic material), fiberboard, plywood. Most a budget option- Fiberboard, the most expensive - lamellas. The lamellas are mounted on special stops (lat holders). When using plastic stops, there is a possibility of breakage. At the same time, low-quality lamellas can bend (in a normal state they are bent slightly upward) or break - to reduce the cost, they are often placed across a large gap. All this leads to the fact that the seat of the sofa is pressed through. Instead of wooden slats, there can still be snake springs. They also have sufficient elasticity, but cost less. The problems with them are the same.
The spring block itself... The block can be with independent or dependent springs. The former is cheaper, the latter supports the body well. Such mattresses are also called orthopedic.
Felt or thick fabric(teak, another similar dense fabric will do). This layer is needed so that the springs do not push the foam rubber located above.
If the fabric is thin, it will tear, then the foam rubber will begin to crumble. But this is not the saddest thing - the lamellas bent in the opposite direction. In a normal state, they should be curved upwards.
Polyurethane foam(Polyurethane foam, foam rubber - all names of one material). Special dense foam rubber is used. If you choose, in addition to density, look at such an indicator as the durability coefficient - the higher the number, the better (and more expensive). This indicator shows how long the foam rubber will restore its original shape after removing the load. Its thickness is taken from the original, factory cake. You can make it thicker without restrictions only on upholstered furniture that cannot be expanded (bench, sofa, armchair).
Sintepon... It is necessary so that the fabric does not "wash" the PU foam. It is usually glued to a layer of foam rubber so that it does not fold into folds during operation. The glue is taken in a spray can.
Upholstery fabric... The best are tapestry, chenille. They do not crumble, it is easy to sew from them. Flock and jacquard are not bad fabrics, but some of them "creep" at the seams. Therefore, when sewing, the seams must be strengthened. By the way, it is better to sew the upholstery for the sofa with special Tytan threads. Regular ones, even thick ones, will tear quickly.

These are all layers and their features. You can add something (for example, a double layer of padding polyester), remove it is highly undesirable.

The device of the sofa on the springs "snake" and options for its restoration

"Snake" springs in expensive models are used as an additional means to increase elasticity. In budget models, a foam block can fit on this basis. They are attached to a wooden or metal frame across the seat - each spring separately. The installation step depends on the planned load. If your sofa begins to sag, or the springs have lost their elasticity, or are broken, it is treated with a replacement.

To increase elasticity and extend the life of the sofa, the number of "snakes" can be increased when the sofa is stretched. Another option is transverse reinforcement with rigid corsage ribbons (which are used for straps on bags, backpacks).

The tape is nailed from one side to the frame. Professional furniture makers then tighten it with a special tool, but you can replace it with a regular bar wrapped around in the middle with coarse-grain sandpaper. Wrap a couple of turns of the tape on this bar, pull with both hands (make sure that the frame does not bend), fix the tape with staples or nails, release and cut off the excess. The same method is also suitable for extending the service life of a slat mattress.

An example of a sofa repair with step by step photos

The old sofa became completely uncomfortable, began to fall in places and creak. There is no way to buy a new one, it was decided to drag and change the upholstery. As usual, the stretching of the sofa begins with disassembly. The legs were removed first. The railing was attached to two large bolts, they were unscrewed and removed without any problems. Further, it is also easy to disassemble - in turn, we unscrew the emerging bolts.

When all the components were separated, the old upholstery was removed. The staples were easily removed - the frame was made of pine timber. The spring block itself turned out to be free of defects, but there was a crack in the frame, one of the frame beams led, the fiberboard sagged, although there were no cracks.

Frame repair

Since the frame carries the main load, it is better to replace damaged elements. We carefully measure them, draw schematically, put down dimensions in millimeters. With the drawing we go to the carpentry shop. Pay special attention: the wood must be dry, preferably chamber drying. If you know how to work with wood yourself, you can do it yourself.

It was decided to connect the frame, as it was, on a spike / groove, having coated it with carpentry glue. But so as not to be loose, the connection was reinforced with metal dowels.

First, the joints are glued, clamped in a vice. A hole is not drilled under the dowel large diameter, the dowel is nailed down. The frame is in a vise until the glue dries.

We will use 4 mm plywood as the basis for the spring block. The sheets are standard, a little more than 1.5 meters, and the length of the sofa is almost two. It turns out to be two pieces. It is better to make the junction of the pieces on the jumper, so it is more reliable. Cut out rectangles of the required size, coat the frame with wood glue, lay the plywood, nail it down with small nails. The length of the nails - so as not to stick out from the outside of the frame. We additionally support the joint with a bar (50 * 20 mm).

The updated sofa will serve in the country, so we try to keep the budget as small as possible, we use an old blanket instead of a spring pad. We stretch it well, fasten it with staples using a manual one.

The base for the springs is an old fleece blanket

If possible, it is advisable to put a thermal felt here. It is more reliable and not so expensive. It is cut to size, straightened and nailed around the perimeter. You can use staples or studs with large caps.

We repair and fix the spring block

Powerful U-shaped brackets can be used to secure the spring block, and it is better if their legs are sharpened. But the stapler does not work with such, therefore, staples were cut from steel wire with a diameter of 1.5 mm, we hammered in with a hammer.

In addition to fastening to the frame, the springs are also fixed with nylon braces. Twine was taken, folded in two layers, secured with the same wire staples. We tighten the padding so that it does not press down on the springs, but the tension should be sufficient so that the block does not "move".

A dense material should be placed on top of the springs, usually felt. In this case, the old flooring... Something like felt. It is quite dense and durable. Fold in two layers, cut to size. This layer must be attached to the spring block. The coating is dense, you can't pierce it with a needle, even a gypsy one. A large diameter awl will do, but it's not there. We pierce the coating with a nail, which we push with the handle of a screwdriver. We pass a thick thread into the holes made. The stitch pitch is about 3.5 cm. To speed up the process, we use several nails at once.

Further "according to plan" should be foam rubber, on top of which a synthetic winterizer is placed. In this project, it was replaced with two layers of densely elastic material that had been stored in the attic for a long time. Instead of padding polyester, another old blanket was used. To prevent the blanket from traveling, it was tied around the perimeter with threads (in the usual technology, the synthetic winterizer is glued to the polyurethane foam or latex using glue from a can).

Cover and wrap

It turned out to be easy to sheathe this sofa: the shape is simple, without decorations. The old cover was ripped open, a pattern was made on it from a new, not very expensive upholstery fabric. In the place that falls on the corner of the sofa cushion / seat, a thick tape was sewn from the inside out - so that the fabric does not rub. The fabric is inexpensive, so the edges had to be tucked up so as not to crumble. They are often left untreated.

The finished cover was laid out on the floor, and the restored part of the sofa was laid in it. At this point, it is important that the fabric is stretched evenly and not wrinkled. Began to nail the cover from the middle, moving to the edges. Used staples with thick backs - so as not to damage the fabric.

The back of the sofa was restored in the same way, the armrests were fitted, then all the parts were screwed to the folding mechanism. The thickness of the pillows matched, so there was no problem.

The upholstery of the sofa is over. Result checked 🙂

According to the test results: the seat turned out to be harsh, but for a tired back it is the most it. For home, of course, it is better to put foam rubber, and for lovers of comfort - latex.

Dmitry Chief Technologist HEGGI

If the hole is not large, then it can be repaired with special liquid leather or darned. But if the hole is more than 5 cm, believe me, it's better to fit your furniture again.

The classic said that "nothing in the world lasts forever"! Unfortunately, this statement applies to absolutely all people dear to our hearts, as well as objects that mean a lot to us, including our favorite furniture that has surrounded us at home for many years.

Timely cleaning and disinfection of cabinet and upholstered furniture is required elements... But there are situations when little depends on the owner of the product (one of the guests burned the sofa) or he notices complex pollution too late. A hole in the upholstery of your favorite armchair or expensive sofa can be especially unpleasant!

How to fix a hole in a sofa?

If it is of considerable size, then it makes sense to think about a complete replacement upholstery material However, this process requires, as you yourself perfectly understand, the intervention of a professional, whose services can be expensive. At the same time, you do not have to take your upholstered furniture to the workshop (by the way, this is also an additional material expenditure) - today it is possible to call a furniture master at home, where he will do his work.

Another option for solving this problem is a regular blanket. Pick up an upholstery cover at your nearest textile store and cover the sofa seat with it. If neither one nor the other methods suit you, then you can use the following helpful tips... Elimination of a hole on upholstered furniture products, first of all, depends on what material is used for upholstery. It can be fabric, natural or artificial leather, suede and much more.

There are many special solutions and devices designed specifically to remove damage from the surface of upholstered furniture. These include the so-called "liquid skin". This special solution has the consistency of a paste. It is tucked neatly into the hole on the couch and pressed with a dry napkin. Then an iron is placed on it (1-2 seconds are enough). After these actions, the napkin is removed, and if the color of the “liquid skin” is selected correctly, then nothing will be noticeable in the place where the hole gaped a couple of minutes ago - the upholstery is as good as new! The principle of operation of this method is simple - the paste fills the hole and melts under the influence of high temperature, after which the surface looks solid and intact.

You can also try sewing the hole in the upholstery yourself at home. How to sew a hole on the couch? - it's not difficult, but get down to business only if you are confident in your abilities, otherwise you can ruin everything even more. Take a piece of the same or similar upholstery fabric and make a patch. Remember that the stitches should be small and “hidden” (invisible to the human eye). In this case, you need to use only special furniture accessories for sewing: threads, needles, etc.

Elena Chief designer of HEGGI

Did you like the article? Share it

Print article