Make a grid for curly colors. Supports for curly plants: ideas for your garden

Curly plants are able to surprisingly transform the garden and the local area: to improve, revive and decorate it. Arches, blamed blooming plants, shady gazebo hidden in a secluded corner, live wall of a fusing greenery - how much opportunities to diversify the landscape provide us with curly decorative plants!

So that the Liana can climb up, they need suitable designs - special supports for curly plants

Yes I. practical use They always have, for example, with their help you can disguise the unsightly walls of household buildings. But they also require care and, above all, supports that ensure their growth and full-fledged development. Many of them are easy to make themselves from residual building materials and breeding agents.

Supports for curly plants can be natural (trees, bushes or large stones) and artificial. For outlets offer various original and comfortable structures from metal, wood and plastic, but in each country there will always be enough material for the manufacture of lattices, pergol, trolls, arches and a steller. It is completely easy to come up with their design, and to translate your ideas to life. And the use of a choler in the cultivation of curly leguminous crops or cucumbers in the garden will not only more rationally use the area, but will improve conditions for their development.

Supports you can create with your own hands, and acquire from manufacturers - many firms produce pergolas, arches, choplars specifically for curly plants

Supports should be resistant and withstand the weight of plants without deformation. It is especially important to take into account when planning Lian with lush foliage - in this case, the supports burst deep enough or put them on foundation columnal. The elements of the supports should be rough, so that the stalks of the plants do not spike with them or need to be equipped with them with anti-slip fixtures.

Cone

For single landings, a simple support is suitable in the form of a cone (shala). Long sticks are bought in the corners of the marked square, they bind them up, and small sticks of the cross will be fixed on them. Suitable for both vegetables and annual curling colors: Kobei, Ipomey, fragrant peas, etc.

There are also such ready-made supports for ampel and curly annuals. They can be used as an alternative to kashpo and suspended pots

Make a simple support in the form of a cone is simply inexpensive, you do not have to spend on materials

Ready forged supports of various shapes can be purchased for miniature curly annuals. IPOMEY, decorative beans, Ivy for them perfectly fit

Support from Rabit Mesh

Support from the chain grid, stretched between two pillars: wooden or metal, is perfect for creating a live green wall. If you purchase a plasticized mesh, it will look more aesthetically and does not rust. Metal poles You need to paint, wooden to handle with an antiseptic, and fasten the grid to secure with special hooks or wire. As the plant growth, the plants will cover the mesh completely, and only a green carpet with collaborate colors will remain in appearance.

Support for plenty plants from the grid Rabitsa can serve simultaneously with the fence for a section or garden

Pergola

Purpose Pragol - Garden decoration, and they are invented specifically for curly plants. The classic design consists of vertical support pillars and a lattice roof with a pattern of squares or rhombuses.

When the roof is powered by flowering lianas, pergola turns into an amazing beauty gallery for walking and relaxing. Often pergola is combined with the arch, and such an ensemble becomes one of the most attractive decorative elements of the garden. Alternatively, pergola can be located above the double arch using it instead of the support pillars.

Forging on the plot also looks attractive. Can be used for the garden different arches-pergolas and especially they are suitable as a support for plenty roses, grapes, honeysuckle

Sleepers for curly plants in the garden

Tremers are called supports in the form of lattices of wood or metal, and their difference from pergol is that they can function without supports: molded to the walls of buildings or installed in the garden as an independent element.

Such a sleeve for plenty roses is easy to make a thin bar, paint - and you will have the opportunity to highlight a separate garden zone

Easily manufactured with their own hands from a thin bar, the configuration is the most different: can be made in the form of a solid wall or with an arch in the central part and with a drawer for planting colors. To improve the rigidity of such a design, it is placed between two frames, and on top are fixed with their horizontal strip. The coating of its shadowed varnish or paint will not only protect against the effects of weather factors, but also allows you to choose a shade, harmoniously combined with the surrounding landscape. Tightly to the wall, the glove is not pressed - a period of 10 cm is needed so that the Lians evenly wrap it. From several stelter you can create a green screen, use them for zoning the site.

In the photo one more option is a simple support for plenty roses

Arki.

Arch is the most beautiful support for their all existing options. It can be made not only from wood and metal, but also lay out stones or bricks. In addition to the classic semicircular shape of the arch, you can meet both fit and flat, and duplex.

Arches from plenty roses became a classic - they are widely used when conducting wedding ceremonies and other celebrations

The material must be combined with the rest of the buildings, and the dimensions are calculated individually, but in such a way as to pass through the arch, do not hurt the plants. Since the weight of the plants flying around the arch is impressive, especially during the rain, supports require reinforced strengthening in the ground. So, if the design is metallic, pipes pour concrete solution.

Such an arch or several on the plot will create an atmosphere of the holiday in which you will be every day

Any of these devices will bring novelty to the appearance of the garden, adds to him cozy and secluded corners, will deploy the necessary accents or, on the contrary, hide the places that are not intended for prying eyes.

Video: Making with your own hands Trelliers under curly plants

So that the curly cultures rose normally vertically, you need a support. Slearman for her own hands is done simply. It is installed anywhere. Trelliers can be removed when the country season approached the end.

Varieties

Raspberries, roses or grapes has varieties. A person should familiarize himself with them and decide what is suitable for him. Supports are:

Single bed. These are various lattices, partitions, fences.
Two perception. It can be balconies, arches.

The first look is better to choose for small sites, young shrubs. The bushes that are greatly growed, will suit the second option. With the help of a two-plane tag, you can save space, provide an excellent harvest.

Material of manufacture

Most often used wood for racks. It is made from planed type rails or material. Not only the wood is used, there are still metallic, plastic, wrought, bamboo. Sometimes a conventional wire is used for the design.

The material must be resistant to corrosion, transfer different weather conditions. After all, the design is not hidden, but is open-air. Of course, if it is not placed in the greenhouse.

Form of wooden structures

For the planned design, it is important to choose the right form. Wooden garden trellis is better made square or rectangular. The form must be celly. The design will be stronger if the cells are less. It is recommended to combine cells of different sizes: first do large and then small.

In order for the trellis for curly plants with their own hands, metallic brackets, angles are added. They are placed in the joints of the rail.

The two-plane frame must be more than 2.5 cm in thickness. This allows you to serve as structures as a support for plants of any kind. Such trellis for roses can be made without attachment for the walls.

Form of structures from other materials

Sleeter for curly plants, with their own hands made of plastic, wire and metal, can be a varied shape. It is made of arcuate, fan, horizontal, s-shaped, sliding, tent. Such structures replace many decorated elements, designed for country sites. With the help of trellis make dream vineyards. It should be paid attention to the varieties of plants, as it sometimes takes the use of special forms.

Requirements for supports

The trellis for curly plants is created with their own hands, sustainable, such that could withstand strong wind. Allocate such requirements for the constructed support:

it is required to arrange a foundation or deep insert the structures supports;
curly plants should climb on a rough surface, otherwise they will not be able to stay.

Support with your own hands

Roses that weave, very harmoniously look at metal structures made in the form of a column. Making such a support is easy. This is done as follows.

Pour the foundation from concrete.
Install 4 pins of metal.
It requires to fight transverse rings that make thick wires.
In the end, this support will be placed roses. These can be other plants. Sometimes the support decorates, make it, for example, in the form of the Eiffel Tower, crossbar at the same time.
The design made well fastened on the surface.

Sometimes a trellis for raspberry, grapes, cucumbers and others are made in a more complex way. This requires:

brussia from a tree with a size of 0.3x3 cm;
drill;
hacksaw;
chisel;
round shape bars;
self-tapping screw;
antiseptic mixture;
dowel (diameter at the same time is 9 cm);
screwdriver;
brushes, paint;
glue that glues wood.

The trellis in the country is mainly done in the form of a rectangle, so the construction requires boards that are formed by the framework. Typical two-meter bars are taken. The framework is constructed, longitudinal crossbars are attached. The distance between them is determined depending on the plant that the design will support. Between the conceded crossbars fasten the transverse

It is required that the bars are well pressed against the crossages. Because of this, small cuts of the chisel are made. In order to bind wooden elements, use waterproof glue. Sometimes self-tapping screws are used, it allows you to strengthen the design. While the trellis for cucumbers, grapes, raspberries or other plants is prepared, as the glue should dry, the wall is selected, where it will be attached. Then mark the place of attachment, drill holes under the dowel.

The design itself must be impregnated with antiseptic fluids, it will create protection against insects and high moisture. Slear for raspberries, grapes, cucumbers and other plants can be painted. The color is selected at your own discretion. There is also another option: lacquer coating.

After the work done, the sun is installed on the wall. It is used as a support for any plants that go.

Construction for grapes

In the case when the grapes are planted not near the house, but away from it, for example, in the garden, it should be approached differently to the construction of the structure. If there is a little plants on the chopler, to facilitate their growth make low supports. But grapes gradually grow up, after which small structures are not able to withstand it. Because of this, there are more durable choplars, for example, using wire.

For this, there are two supports, their deeply, 60 cm, bury. Between them the wire is stretched. Supports make a thickness of about 15 cm, and in height they must rise by 2.3 m, and even more. Between the columns there is a different length, it is about 2.5 m. Must and additional supports, the thickness of which depends on the plants stems. By the way, so that the grapes are better grown, the sleeper is sent south.

To build support with your own hands, it is better to use strong wood, for example, oak or ash. In addition, silk, acacia, chestnut is often used, since these trees are sufficiently solid. But Berezu, Olhu and Topol do not advise use. Support from these trees will be unreliable. A wet or young wood is suitable for the design, since the material should be dry.

It is recommended to use a tree that is purified from the upper layer, processed by antiseptic mixtures. It is wrapped with a special perfectly suitable wire with a zinc coating, as it serves a long time and looks aesthetic. The lowest row is attached at the height of the half-meter above the ground, and the following rows are stretched at the same distance from each other. This design is usually 3-4 rows of wire.

Used for support and metal, concrete columns. Metal designs do not differ in size from to make holes for fastening the wire, it is required to drill holes. In this case, it is impossible to apply the brackets, how it was done with the wood. But such trenches should not be used if the grapes scratched greatly. Here you will need to build two-plane structures, but they are hardly manufactured.

For plants that are low incurred, for example, for cucumber, simple supports can be used. To do this, it is enough near each plant to knock the pegs to the ground, and pull up the ropes from them. Cucumber will be able to stretch up in such designs. Also in such situations often use plastic supports. But it is worth considering that they are not able to withstand heavy plants.

It's important to know

To the support for grapes, it is necessary to approach carefully, since with the right structure it will bring great benefits. Some rules should be taken into account so that the design lasts for a long time.

It's important to know:

Placing supports for grapes should from north to south. Make so that the bushes are covered with the sun on both sides equally.
It is possible to periodically process parts from steel to a means that fights corrosion. Wooden elements are treated with drugs that destroy the fungus.
Trelliers can be deformed or seized. That this does not happen, make strengthening using transverse axes and crossbars.

Supports are capable of listening for a long time, while bringing only benefits to plants. To do this, it is necessary to spend more time on their construction, to include fantasy, carry out all measures to protect the material that was used. In this case, the vineyard will delight its owner, fruits, develop for a long time. Many factors should be taken into account in the manufacture of supports for other curly plants.

Give your own pomidery Beauty and unusual species can be if you set special support for curly plants. What are their names? Handler for curly plants do it yourself to make it easy or buy in the store. If you have chosen the first option, then the material for creating a design can be absolutely any: wood, metal, branches. Here you need to take into account the appearance of the garden and the growth of the plant.

Possible supports for curly plants

Today, anyone can establish such types of supports at the cottage or at home:

trelliers;
lattice;
grid;
arch;
pergolas.

Trelliers

Handling support for curly plants is the most common. Material can use metal, wood or even plastic. It all depends on your personal wishes and moneySince the last look is somewhat more expensive than everyone else. On plastic supports, it is best to grow clematis, as they are afraid of low temperatures in winter, therefore move along metal trellis. But Rose, grapes and actinium feel great on a metal support. Dimensions Trelliers: height 175 cm; width 60 cm; cell size in axes 15x25 cm.

With the peculiarities of growing and care for Glycinia will familiarize themselves.

Lattice

The grille made of wood is the cleanest and cheaper product. Such a support is an excellent option for garden curly plants. It is necessary to use the minimum of fantasy, buy bars or boards and perform a beautiful and reliable support.

The minus of such a structure is in shortness, since the support is deformed under the influence of precipitation. To increase its life, the surface of the lattice must be processed with paint or varnish.

Wooden grilles to actually use as a support for indoor plantsAfter all, in the garden they can spoil because of frost and rain. On the wooden design of the plant will never move.

Construction dimensions: height 150 cm, width over 100 cm.

You may also be interested in manufacturing process.

Grid

Grid for garden curly plants (garden grid) is a cheap and durable type of support. It is easy to use, perfectly passes the sun's rays and simply transform. Such an option is suitable for scented peas and ipomey. You can use a grid for growing cucumbers and legume crops. Dimensions: Length - 1 m, width - 2 m, but you can make large sizes 2 x 5.

Arch

Arch support will help transform your garden plot. For its manufacture, plastic, wood and metal are used. Metal arches are the most durable designs. Wood supports require treatment with anti-grib drugs. Plastic arches are exposed to temperature difference, as a result of which the design becomes fragile. Arch dimensions assembled: 1400x2400 mm.

Pergola

Pergola is an openwork corridor, for the formation of which several arches are combined with each other. Thanks to this design, it is possible to highlight the garden plot and securely protect the greens. The height of the product can be 200-240 cm, width 120-150 cm.

Spell varieties

Such a version of the design will allow you to make your garden beautiful, as the plants dissolved on the chip will please the view of others. For the manufacture of the choler, you can use various materials. Most often it is broom, wood, branches, bamboo, plastic.

From the branches

This design is an economical option. In the fall, the support should not be removed, but to select and save them until the next season. To create a cholera, 20 pieces of twigs are enough. Such a design can withstand light curly plants except grapes.

Wooden

To obtain such a product, it is necessary to use the process of bars, the diameter of which up to 2 cm. To give a fortress, it is necessary to make a solid frame of wood, with a diameter of 3 cm. The production of the production of wooden choplers is simple. First, a strong framework is performed using a large thickness bar, and then a mesh is attached to it from a fortunate of less thickness.

The shape of a wooden chopler is determined taking into account the fantasy of the creator, and the strength of the product depends on the shape and dimensions of the cells. You can make a design in the form of a triangle, rectangle or square.

Metal

Metal choplares are long and powerful pins that are installed in the soil. Such products are characterized by high strength and easily oppose the negative impact of the wind. To make taperes, it is necessary to use the metal wire in the process, the diameter of which is up to 2.5 mm. In the manufacture, it is important to observe the symmetry and correctness of the cells. Their size depends on the further operation of the design and host preferences.

For example, if you need to achieve a homogeneous type of product, it is advisable to use models with small cells. As a result, culture as it can consolidate and grind the design tightly. To obtain transparency, it is necessary to establish a product with large cells.

Worn from metal

Such a stand is original design, ease and beauty. Forged trellis give your garden an unusual highlight. When using artistic forging, any design acquires mysteriousness and elegance, and the seters made in openwork style and surrounded by blooming and bright plants will present this sight.

Despite such a duct, wrought structures can withstand a significant load. If you need to divide the garden plot to the zone, then the best option It will be the use of large forged trellis.

Follow an interesting option is a wrought insert instead of one fence section. As a result, an air and elegant fence is obtained. You can get a cozy and stylish gazebo if you install the product bench.

The strength and plasticity of the metal allows you to manufacture the tarts of the most ordinary shape and sizes. For perfect combination With the surrounding design, it is possible to complement the sleeper with an interesting pattern.

Forged products possess the following advantages:

simplicity and reliability;
durability and confrontation of moisture;
withstand a large load;
plants are evenly broken throughout the plane;
such designs - a great ornament for a garden that do not need frequent repairs and care.

Plastic

Such material is considered the most budget and simple way Garden decoration. You can buy a design in the finished form in any specialized store. They produce a plastic holder in a wide range of form and dimensions. The installation process is carried out using brackets, dowels and support pipes. Products have a light weight and cannot withstand heavy loads.

How to make a sleeper

You can perform support for curly plants with your own hands. This process is simple and does not take much time. Adhering to strictly manufaction instructions, you can get a solid and durable design.

Wooden trellis

The resulting product must have the necessary strength, especially when there is a load of several plants at once. To create a strong and reliable designIt is necessary to prepare the following materials:

brussia, 30x3 mm;
tight round timber;
self-tapping screw;
antiseptic;
dowels, 7-10 mm;
glue;
chisel;
hacksaw;
screwdriver;
drill;
painting composition.

Manufacturing process:

The process of manufacturing the tolders implies the performance of high-quality and durable crate. For these purposes, you need to perform a direct frame of 4 planks. For vertical overlay, 2 strips use, and the remaining 2 - for horizontal.
Before fixing them, you need to check the symmetry, taking advantage of the ruler. The length of them can be slightly different.
The value of the length of the transverse slats should reach 35-40 cm. It can be used itself. Depends size from parameters such as plants, as well as the format of buildings nearby.
For light insertion of transverse crossbar, it should be noted all bars with cuts. The distance between the marks is 30-40 cm.
The crossbar fasteners from the bar is carried out with the help of moisture-resistant glue.
If you doubt the strength of the connection, then the self-sinking of the composition can be used.
Parts of the product can be copper with screws. The surface of the wall to which the installation will be performed, pre-stored according to the parameters of the new design.
Run holes for dowels, and between the product and the frame insert cylinders.
Process the finished product with the help of antiseptic composition. The coloring composition must be applied at will. The final installation of the cholera is carried out on the wall.

The product from the branches

For the production of trellis from branches, you need to prepare the following tools:

branches, a diameter of about 1 cm - 20 pieces;
durable wire;
secateurs.

Procedure:

Prepared branches to sort depending on the size. Set the branch into the ground to a depth of 10-15 cm.
Set the second branch at an angle of 60 degrees and on small distance From the first.
Mounted branches fix with wire.
Such manipulation to repeat to the moment until the desired appearance design.
To give a rectangular singer, you need to use the secateur. All protruding elements thoroughly cut.

All information about street plastic flower vases will be found.

Video: Making a stand with your own hands

On video production, the trellis is handled:

Conclusion

Support for curly plants is the necessary device for the correct growth of cultures and giving the residential area interesting and beautiful view. You can perform such a product with your own hands, putting at least effort and time. All that is needed is to determine the form of the structure and the material for its manufacture.

Curving plants - fruit cultures and colors - it is necessary to make supports not only reliable and stable, but also, if possible, aesthetic. Such designs will allow to give the garden accuracy, and the flower beds are originality. In the material, we are detailed, with schemes and photos, consider how to create supports for curly plants.

Artificially created supports for curly plants on the site can be divided into several groups:

small architectural forms (arches, lattice trellis, pergolas, etc.);
form supporting groups of plants (lattices, grids, strips, guides);
forms for individual support (frames, wooden and metal grilles).

To work with the metal requires certain skills, so most of the gardeners find their sections, creating no less interesting structures from wooden rails and planks. Painted lattice trellis and triangular supports will become a bright decorative element of the flower bed, and the grooves with cucumbers, peas and beans of the supports will give your garden with a neat well-kept look.

Making supports for curly plants You are pursuing not only aesthetic goal - reliable support ensures uniform entry of light to the shoots, prevents driving, significantly increases the yield of cultures and prolongs the decorative period in colors.

Constructs for curly plants are highlighted by several mandatory requirements. First, the supports must be stable, for this they need to shower or arrange the foundation. Such measures are due to the possible high weight of the "creeping" green mass, which clutch structures may not withstand, and also serve to confront the strong streams of wind.

Supports for climbing crops and flowers do it yourself

The most popular variety of supports for curly plants - Trelliers. Different types of them are actively used by gardeners to support colors, grapes, cucumbers, beans, raspberries and blackberries. Trelliers can be solid wooden or metal grilles, as well as a grid stretched between the columns, for which the culture growing upwards are cling.

Cone

Simple support for curly plants can be made of smooth sticks or wooden plates. There are such structures before landing and the appearance of inputs, so as not to harm the gentle roots of plants. The cone-shaped support is valid for Clematis, IPOMEY, ampel gloomy, fragrant peas and decorative beans, cucumbers, grapes, - as these creeping crops will cover the created frame with a spectacular green hat, under which wooden elements will be invisible.

Prepare rails or sticks of the same length.
Cool one of the ends of each element for further plug in the ground.
Stick Reiki to the ground to a depth of 30 cm under the tilt, connecting the upper ends.
In the center of the design, stick another rail, which will serve as a support for inclined elements.
Crossed ends securely fix the twine.

Curly plants are planted on the outer sides of the frame. To increase the "chain" of the cone, it can be additionally wrapped in a twine or twine, - as the culture grows will be graded for them with their mustache.

Lattice

Simple, but incredibly spectacular lattice trellis will become a good decoration of your site. Make it with your own hands is not at all difficult:

Sketch the drawing of the future design and decide on the volume of materials.
Purchase, respectively, the calculations of wooden bars of 30x30 and rails and saw them into size. Bars on the edges are cut off with a hacksaw at an angle of 45 0.
All items need to be treated with an antiseptic or oil: these measures are needed to protect the street construction. Thereafter wood blanks Must be carefully dry for 1.5 days.
Collect the frame from the bars, controlling the flatness of the frame with the level and the square.
Make marking for fastening the rails - fixes them best in increments from 30 to 40 cm.
Attach the rails using screws or moisture-resistant glue.
Color the finished holder with a spray gun.

Such a sleeve is usually attached to the wall of any construction on a dowel-nail, in this case, drill bars in the appropriate places.

If you want to make a stable grille that serves as a decorative partition, you should revise the specified design slightly, organizing the "legs" for the blowjob and further concreting.

Simple tweer

Such a support will serve good support for grapes and other curly plants. If you know how to work with the welding machine, you can make it from metal, no less carefully looks like a wooden design.

The algorithm for its creation is quite simple:

Calculate the height of the racks, taking into account the fact that 0.7 m will be added to the bullet.
"Underground" part of the racks treat the resin, diesel or wrap the ruberoid to extend their service life.
At the racks are placed places of attachment crossing with a pitch of 400 mm.
In the marked places, horizontal crossbars are attached (wooden rails, metal fittings or twine).
A pits of 0.8 m depth of 0.8 m are digging, they are installed in them with strict control of verticality.
Poons are covered with rubble or broken brick, and then poured with cement mortar.

The simpler version of the wooden cholera is presented in the following video. Such a support from the frame with vertically stretched ropes Perfect for cucumbers:

Grid

The optimal support for cucumbers, beans and peas will serve as a garden grid. You can weigh it yourself from wire, kapron cord or fishing line, but it's easier to buy a finished product. A galvanized or plasticized slave can also be used as support for fusing plants.

For a frame to which the grid will be stretched, you can use any infrid materials: residues plastic pipes, Aluminum corners, wooden bars and metal columns. Of these, the framework of the required sizes is constructed, on which the mesh canvas is meshed with the help of pieces of wire pliers.

With the help of such a mesh, you can successfully zonate the space of the site: grapes, hops and other ripening crops will create a spectacular green wall to the middle of the summer, which will serve as a partition and give a shadow.

Columns

The metal frame in the form of a column will be an excellent support for rosy varieties. It should be equipped with a design before planting colors, because its creation is associated with earthworks.

Decide with the place to land roses and the future column.
Prepare metal pins (from 4 pcs) of the required length (taking into account the plug by 70 cm), thick wire and welding machine.
Find a cylindrical basis that will serve you to form the same rings out of the wire (a sewer pipe is suitable).
Using the base, harvest the required number of transverse rings from thick wire.
Having cut a hole with a depth of 80 cm and install the support pins, adjusting the position and the distance between them so that they put on the prepared rings.
Put the pit with rubble and concrete.
Wire transverse rings on the column.

Suck flowers around the column. Such a solid design will become the picturesque decoration of your flower garden when curly roses effectively collapses frame.

Depending on the experience with various materials, you can create any support for curly plants on your site. Simple and lattice cholerars, garden grids and chain, durable metal constructions - All these options can be made with your own hands, and then they will decorate your Earth and useful support for cultures.

Did you like the article? Share it

Print article