The most unusual photo frames do it yourself. Wooden frame with her hands Photo frames from wood. How do

All photos from the article

If you have a lot of photos or any paintings and other compositions that you would like to hang on the wall, you can't do without a framework, with them anyone described above will look much better. The cost of ready-made options is quite high, but if you wish, you can make a framework and on your own, this is what this article will be devoted.

What you need to work

We will understand what materials and adaptations will be needed when working:

Important! And do not forget about paintwork materials, A wide variety of options can be applied - from varnishes and impregnation to morilos, and special compositions for giving products ancient species with gold and patina.

The working process

To deal with the question, how to make a wooden frame with your own hands, can even be the one who has never engaged in such activities. We will consider a sequence of work to make you easier to simplify your work.

Preparation of all necessary and cutting blanks

First of all, you need to choose photos, paintings, collages, embroidery and other songs that you want to locate within, it is necessary in order to remove the actual dimensions and do exactly the configuration that you need, and not customize items under the Ready , This is a huge advantage of homemade frames.

As for the process, it happens as follows:

• If the photo is a passe (framing from cardboard), then they need to be done in advance and on them to remove the sizes of the framework, with the exact parameters you can move to the choice of material for the manufacture, suitable both and other options, on sale you can find many blanks, price which are low, they are perfect in our case;

• Next, it is necessary to make measurements, it is important to do it carefully to not be mistaken, otherwise the finished product will be released by curves. Control so that the pair elements are the same size;
• Cutting blanks at an accurate angle was previously considered complex and painstaking work, but nowadays you can buy a stood with a saw for a little money and cut the wooden elements very precisely and very quickly. The most important thing is to use a saw with a small tooth so that it provides the best quality cutting than the perfect edge, the better the elements will be connected and the more attractive will be the finished product;

• Last but the rear side of the blanks need to choose a groove under the glass, its depth should be 3-4 mm more glass thickness so that it can be fixed with small cloves.

Build product

The instruction on this stage is very simple and understandable:

• Initially, it is necessary to connect two elements and securely fix them, as noted above, the best method The fixation is the use of a special corner clamp, with its help you reliably fix the parts in the right position, and they will not move when drying, the joint geometry will be perfect;

• After gluing, you can start further work, first of all, it is a decor of a wooden frame, here your imagination is not limited to anything, so only the style of the design and the selected color solution depends on you;

Important! You can achieve the effect of the antique painting the frame at the beginning of dark paint, and then bright, after which the shallow sandpaper in some places upper layer rubbed.

• Then you need to insert the glass, behind it is located passecut when it is presented or immediately photo, then you need to invest for stiffness tight cardboard And the whole system will fix cloves or attach special swivel locks of small size;

• For fastening on the wall, you can attach special eyes from the back side (they can be purchased in furniture accessories stores) or drill a hole along the fastener diameter to simply wear a frame on the hat of the protruding nail or self-press.

Output

Production of the framework - the process is simple, while you can get a unique result, because any ideas can be realized, the main thing is to choose the appropriate materials. The video in this article will tell more information on the topic if you have any questions or important comments, leave them in the comments below.

There is always a question how it is better to glue a wooden frame for a picture. Frames with figure profile are joined in "Us", i.e. The ends of the parts are roaming at an angle of 45 *. Clamps for tightening the frame when gluing have existed for a long time, but here's a strange thing, they continue to invent them to this day.

Moreover, the masters themselves are constructed, especially those who have to do a lot of such frameworks. Apparently one single universal clamp has not yet invented.

I make frames for paintings not every day, and we usually use two ways. The first option is to tighten the parts with a special corner clamp, photo at the top. But this method has some inconvenience, angular clamps that I use do not allow you to collect small frames.

There are others enough simple ways gluing. Make such an adaptation case of literally a few minutes. To work, you will need a smooth square platform from chipboard or thick plywood. On two edges, the reference bars are screwed screws. Pay attention when assembling, bars relative to each other should be at an angle of 90 *. For accurate installation, use a metal coal.

Next, already prepared and dried down the details of the frame with smear glue and we are tightened with two long clamps. When compressed, be sure to check all corners of the carbon frame. The photo shows how else you can check the accuracy of the assembly. Paper "Millimirk" is placed on the fixture platform, and when the assembly shows how the parts relative to each other. And even so that you can use your device for a long time, put the paper under the corners so that the glue does not stick to the site.

Another option is more like a professional corner clamp, although in fact also homemade. There are four separate stubborn corners with sides. All four angle from the inside with an elastic rubber, a tension rope or cable. In the classic version, all four corners are tightened with one bolt, and the stop corners are installed on four diagonal rails.

As for this particular product, here is the whole problem to make these seeds with sideboards. In my opinion, the methods listed in this article are quite suitable for making a small number of frames. There is still a method, article. Although I repeat, the angular clamps for the assembly of the Master Frames continue to invent, everyone is looking for for itself the most convenient option.

Many needlewomen are interested in: how to make a photo frame from girlfriend? After all, it is very necessary thingBut the store frame made from plastic looks completely equally. Therefore, it will be very interesting and useful to learn how to make these things with your own hands, in this you will help our today's MK for beginners.

Photo frames do it yourself from egg shell

These stylish items can be made of any old and unnecessary things. You just need to connect fantasy and do not be afraid to create.

The framework for the photo frames is usually made from cardboard. In addition, you can use the workpiece sold in the store for this purpose.

And how to decorate the cardboard basis? Here only your fantasy can be limited. We propose to pay attention to the master class of the original product, decorated with egg shell.

1) Cut from cardboard the base for a 4-mm wide width frame. The internal perimeter of the frame must match the size of the photo.

2) We make a stand for a photo frame. Cut from cardboard such a figure.

3) With a rectangular uncut side, measure the two-chamber strip and bend it.

4) Cut the rectangle for the rear wall of the frame. Gear details.

5) We glue the leg. To do this, bent two-chamber strip with flashing glue and glue to the middle of the rear wall of the frame.

6) We start design. Blue acrylic paint frame.

7) Cook 5 eggs, clean the shell from them with large blocks. Pour it in different shades of blue paint.

8) When the paint dries, grind the shell.

9) Now let's jump the frame of the egg shell in a random order, but tightly to each other.

10) That's what successful decor it turned out.

Instead of egg shells, you can use broken marine seashells or another type of decor.

Pretty paper frame

It is very easy to make a photo frame from paper, but necessarily beautiful and embossed, for example from wallpaper.

You will need:

• wallpaper;
• cardboard;
• glue;
• line;
• simple pencil;
• scissors;
• macate knife;
• stapler.

Sequencing:

1) Draw two rectangles on the reverse side of the wallpaper. The perimeter of the internal should be equal to the size of the photo. The width between the inner and external perimeter should be 3 cm.

2) In the central rectangle, swipe the diagonal lines and mark 1.5 cm from them.

3) Through these points to lose another inner rectangle.

4) Cut the inner rectangle on the diagonal lines using a maquet knife.

5) Begain the angles inside.

6) Bend the side of the external rectangle.

7) Fine three-eyed stripes fold in half.

8) Each corner has small squares. Cut one fold.

9) We fold the frame box.

10) We are spinning a stapler.

11) Cut the rectangle from the cardboard and glued to the frame. This is the back wall.

Make such a frame simply, it will be very interesting for children.

Comfort and Comfort

Handbook made household items are a kind of faith, a symbol of comfort and wealth. Because things in which a man put his work and his love, possess a very strong positive energy.

Especially appreciated throughout the world their own gifts made. They will definitely bring peace and warmth into your friends, loved ones and relatives. Your young man will be reappeared in your original photo in the original frame. And the children will simply be delighted, receiving as a gift color photo In a bright frame.

Let's consider very simple and fast methods Making frames.

Photo frames do it yourself from rolls from toilet paper

Make a bulk base and take the items at your own discretion.

Cut rolls with rings with a diameter of 1.5 - 2 cm, bend the petal. Petals with each other glue good gluePaint on the appropriate color and frame is ready!

Cut all the same rollers, connect each other, plunday the sequins or rhinestones and the royal frame is ready!

Production framework by appliqué

Here, literally all materials can be used on hand: beads, coins, shells, coffee beans, etc. Details better glued with hot glue-gun.

Photos - the storage of various moments. They keep their lives. That is why always, even in the era of digital technologies, people put on the table, placed on the walls of photos related to one or another event, or man. I don't want to enter into a template framework of the expensive heart of the memories at all. Therefore, the decor of the photo frame was always, there is also in demand. The decoration of the framework with their own hands is quite practically everyone, it is fascinating, makes you feel like a real creator.

Based on the work, you can take a cheap purchase frame or cut yourself from cardboard.

Types of decor photo frames

• the first prevalence way to decorate the photo frames: stick something on it. And this "something" is the limitless sea;
• leave in decoupage style;
• it is originally painted using a wide variety of techniques;

• the frame can be sewed from soft materials;
• cover knitted web;
• reorganize cloth;
• picturesque wrapped in the twine, various threads, braid, lace;
• make out of wood branches;
• it can even bake (from salted dough).

The list can be continued to infinity, only the limit of the fantasy given to you can limit it.

Cleated decor

You can glue the frame very much, everything is determined by the taste and fantasy of the wizard.

Buttons

The framework for photos decorated with buttons will look original, especially if you choose their own color. However, this is not required condition. The desired uniformity color can be obtained by acrylic paint. For example, buttons covered with gold paint are converted beyond recognition in a happy chance that did not have time to get into the trash can an old photo frame.

Beads, rhinestones

Over time, such things in abundant accumulate each woman. All this can be a unique assembly of materials for registration with your own hands of an elegant frame with a favorite photo, it is worth sticking them to a pre-planned pattern, ornament.

Tip: You can use whole brooches, beads, beads, pearls, interesting glass, fragments of a broken dishes, mosaic elements.

Natural materials

The tastefully performed decor frame in natural style always attracts attention. After all, we are all children of nature.

Coffee beans, lentils, acorns

Everything can go into business and create unique compositions.
Coffee beans will use you not only to make an invigorating drink, they turn out to be an excellent material for decorating with their own hands photo frames: they have a wonderful smell, the original texture, noble color, they do not deteriorate. A lot of time work will not take it too: it is not so difficult with the help of an adhesive gun or PVA glue tightly bonded with coffee beans standard frame for a photo, which in a new guarantee will be guaranteed to be the leading interior accessory.

Tip: To make the frame of the fragrance made by their own hands, buy Anis and Badyan asteris and find them place in the whole decor.

Shelli

This is one of the grateful materials for decorating with your own hands a photographic frame. For registration we need seashells of various shapes and magnitude. In addition to the shells, inlaid is appropriate to use interesting glass, sea pebbles and other finds made on the sea or river bank.

Paper

In the course of creating your own hands the exclusive frame, the paper can go, which in the usual scenario threatens the sad fate of the waste paper. Extremely original frames for photographs decorated with paper tubes who served their newspaper, magazines.

They can be both short (stick to the end), and are also obliged - we use in a horizontal position.
Another idea of \u200b\u200bthe decor: Beresta - very spectacular view natural materials. Cut the birest piece on five lanes. Four will actually frame, the fifth can be made stand.

Salty dough

You can turn the usual photo frame to the designer using salt dough. Each ideas are your own: someone will decorate with her with flowers, and someone the name of the child shown in the snapshot is blind. But first it is necessary to do this most dough: we knead it from a glass of salt, two glasses of flour and water. Having achieved plasticine consistency, start to sculpt the planned elements of the decor right on the corner of the photo frame - so the dough will take the necessary form at the base, and it can be glued to the right place without any problems. For 20 minutes we put it in the oven. We cool down, glit to the frame and begin to paint with any paints. You can even restrict ourselves to one of the aerosol canopy. The final stage is to cover with varnish (it is better to do two layers) and drying.

Childhood entourage

If there are daughters in the family, the number of decorative hairpins and gum grows in geometric progression. Cute baubles, decorated, for example, flowers, when embodying this idea, can get a second life. Flowers from the boning rubber, cut off. Those that are larger, stick to the top corner of the frame, below place instances of the label.

As a result, a real floral cascade will appear. You can glue the flowers only at the top, leaving the bottom of the frame untouched. After completing this process, place work for several hours under load. When the flowers are white, which remains free from the decor, part of the frame is to cover silver paint, but can also be green if they cause associations with a spring meadow.

Decoupage

Before starting work, prepare:

• frame (not necessarily new, you can simply bored);
• sandpaper sheet;
• glue (if there is no decoupage, dilute glue PVA equal to water);
• tassel;
• decamental napkins, cards.

After that, proceed to the process of decoupage:

• Old photo frame pre-sod. New, if it is not backed, do not need to process.
• First you need to cut out of the napkin or card the desired areaAfter measuring the frame itself, without forgetting about the margin necessary for the processing of edges.
• Tassel (can be a sponge) thoroughly apply glue on the front side of the frame. Then place the prepared image in the right place and scream it, following all air bubbles from under the glued fragment. Do it, ranging from the center, gradually moving towards the edges.
• Then, literally for two minutes you need to put a frame under something heavy, for example, under a massive book.
• To remove unnecessary pieces of napkin paper, feed the nail file along the edge of the photo frame (the angle of pressure must be 45). In the same way, remove the remains from the central part.
• At the end, apply a layer of glue and put the frame to be dried.

A rich assortment of decoupapable napkins will surely allow you to choose the means of incarnation of the idea and create a unique work.

Another option to decoupage frames for photo

Add paints and varnish to the previous set of materials.

Boldly and nontrivial

• As a frame for photos in people who appreciate originality, it can even be a bicycle wheel who served: Select the common themes, consider the plot, insert a photo between the knitting needles or lock the clothespins - original decor Ready.
• It is not worth guessing how the hunting amateur responds to his portrait in a frame from the shooting sleeves. Of course, with sincere gratitude.
• An option for fishermen: Attach hooks or brackets to the fishing rod, with the help of a twine or not a thick cable with original marine nodes hang on them frames with photos, add a couple of floats.
• Creative frame for a photo can be even ordinary glass jar: Appropriate photo size Place in the selected container, an empty space in it is decorated with sand, shells, marine stars, LED garlands or any other entourage, close picture of the picture.

It is impossible to describe all methods for decorating with your own hands: every day the ranks of lovers of this democratic needlework are replenished, new ideas are born, which, in turn, become an incentive for further ideas. The process of creativity never stops.

Modern artists often sell pictures without frames. They believe that the person himself has the right to choose which framed to use, and whether it is necessary at all. IN specialized stores You can buy a ready-made framework frames, but they are there a definite size. And if the cloth does not match them, then you have to somehow leave the position. Best option - Do everything yourself, because it is easy. So a person will receive a decent framing of the picture of the required size, as well as the design, which, in his opinion, is suitable as it is impossible.

Now we describe in detail how to make a frame for a picture with your own trees. This is a classic material. From it began to make the first frames even when the visual art was only originated. Therefore, from him and start.

Selection and quality of material

First you need to pick up rakes. The tree for their production is not maintained in a certain way, therefore, in places where there are swirls, cracks and irregularities appear with the subsequent drying of the material. It is for this reason that it is necessary to carefully select a material that has no flaws. However, if the frame design needs to show the structure of the tree fibers, then it is better to do racks yourself for baguette. Such a manufacturer of frames for paintings requires a weathered tree, only the bitches do not have cracks in it, because it was dried by special technology throughout the year.

How to create a profile for the frame

To transform the rails in a wooden baguette, from which the frames will be made, the milling machine will be used. Especially for it sold curly cutters that are able to cut through any recesses and create the desired pattern on the surface. Product profile can also be given manual tools. To do this, use special plans, Zenzubeli, as well as caletes.

Tools for creating corners when drinking baguette

Wooden frames for paintings must necessarily have straight angles, unless, of course, their form must be traditional. Split baguette and withstand exactly the degrees of its corners are very difficult. To do this, it is better to use a special fixture, such as a tracing saw. She stands on weekly, but the result justifies this money. But still, how to make a frame for the picture with your own hands without a special machine? If this production is not included in plans, then buying so expensive tool is inappropriate. Therefore, it is better to purchase a stubble for sawing baguette. If still perfectly definitely did not work out the corners, then they can always be finalized on the sandpaper. It will allow you to carefully apply the angle so that everything comes to.

Bonding frame and tools required for this

Now the manufactured frame details must be glued. For this, Titebond II glue is ideal, it is tested by a variety of masters working with wood. It is very important to tightly clamp all parts of the frame. To do this, use a special tool - ribbon clamps. They allow you to evenly and tight all parts of the frame, withstand perfectly straight angles. This simple device is easy to use, even if a frame for a picture of a plinth is made. And it does not matter, plastic it, foam or wooden. The most important thing is to initially cut the smooth corners. You can bore the frame and without glue, for this purpose metal corners are used that are driven into the connection. However, this mount is not so reliable as a gluing.

Grinding finished product

When the glue dries, you need to glue the entire surface of the frame to give the smooth and beautiful view. To do this, use the smallest sandpaper, the base of which is tissue. Clean the best small segments - it is easier to penetrate the corners and the relief of the profile.

Rama surface finish

How to make a frame for the picture with your own hands, we understood in detail, and now, with regard to its decoration and coatings with a protective composition. To do this, use the veil and varnish. If you need to achieve dark color, covered with a verse, and then varnish. When they want to leave the natural color of the tree, then they take a transparent varnish - then all the fibers are slightly distinguished, create a great look. If it is required to give color frame, for example, make a tree pinkish, then you can add a little manganese in varnish. All formulations that are applied must be top quality. If you take cheap, then you can easily spoil the frame. If everything is applied to the surface with the help of kraskopultum or airbrush, the risk of damage is reduced due to the smallest spraying.

Carved frames

Making a framework for painting forms will require the availability of special tools. Such work is impossible to automate, so there are practical skills in the wood thread. The masters for such craft use a multitude of cutters, chisels of various shapes and sizes. This is a very thin work, where not only skills are needed, but also an understanding of the device of the tree fibers. Therefore, it is much more complicated to create such a frame.

Creating a carved frame

First of all, the image is drawn or transmit an image that are collected. After that, it is cut off by a jigsaw. Well, and then you are already starting to the most difficult part - wood thread. In words, this process is not described, it is possible to comprehend it only in practice. It is better to start with simple drawings and gradually move to more complex. Now it concerns the tree. For threads, only weathered material from soft rocks (for example, linden) is taken. All other processes are identical to the foregoing.

The presented frames for paintings whose photos clearly displays all types of their coatings, as well as basic forms, look just amazing. The main thing is to want and try.

We fully understood how to make a frame for painting with your own hands, now it remains to collect all of her parts. To do this, you need to put the face with the face on a clean surface and insert everything in such a sequence:

• glass;
• picture;
• a piece of cardboard.

After that, it is necessary to fix everything with cloves, driven into the frame. This is a sufficiently responsible process, so it stands in detail in detail. To successfully fix the picture in the frame, you need to be attentive and neat. After all, the manufacture of frames for paintings is a rather labor-intensive process, not to mention the writing of the canvas, so you need to do everything perfectly.

I am pushing the carnations on the frame with easy blows. It must press cardboard, the picture and glass is tight enough. Then under this nagged nail put a ruler. From above put the hammer combed and, gently gliding on the surface, make shocks until they score a nail deep enough so that he can hold everything tightly. Thus, all nails are clogged, which are necessary for the dense holding of all parts of the picture.

In this article we disassembled in detail how to make a frame for the picture with your own hands and collect it. It remains only to do it practically and get the desired.