Chess board from covers with their own hands. Chess do it yourself

Chess - interesting table gamewhich requires a certain strategy of action and patience. Unfortunately, quite often chess sets are quite expensive. But if you are looking for a cheaper gift option for a chess game, try creating a set of bolts and nuts. Work on this project will take you only a couple of hours, and on materials you will spend a total of about five hundred rubles.

Steps

Part 1

Prepare necessary materials

Buy materials for making pawns. In chess pawns are infantry. These are the weakest figures on a chessboard, the value of which is only one point. In the complete set of chess pieces of only 16 pawns, eight white and black, and expose them opposite each other in the second row from the opposite ends of the board. To make pawns, you need to take:

Buy details to make roams. In any chess set, there are only four rooks, sometimes called tours (two each color). The roots are valued at five points. Each of them starts the game from his corner of a chessboard. To make the rooks, you will need to take:

Prepare details for horses. On a chessboard there are only four horses (two of each color), they occupy a place near each rook in the same row. These figures in chess are estimated at three points. To make horses, you will need the following details:

Buy details for elephants. On a chessboard, there are only four elephants (two each color), which in the initial position are standing next to horses in one row. Elephants are estimated in the same way as horses, three points. For elephants, you will need the following materials:

Prepare materials for queens. Queen is the strongest figure on a chessboard, which is valued at nine points. At the same time in the set only one in the queen of each color. The queen begins the game from the cell of the same color as the figure itself, sitting next to the elephant (the white queen stands on a white cage, and black - on black). To make queens, you will need to take:

Prepare materials for kings. The king is the most important figure in chess, so she is not given value in glasses. To complete the game, you need to drive into the trap of the king of the opponent (put the mat). The king begins the game on the cage between the elephant and the french. In any set of chess pieces of just one king for each color. To make kings, you will need to take:

Part 2

Make chess pieces

Collect feet pieces. Take the hexagon nuts and wind them on the car bolts so that the nuts are closed with the ends of the bolts. Then, with the help of glue, cover the bolts on the ends on the washer to make the base for each pawn.
- Pawns on a chessboard are usually the most small figures with a wide base, a thin middle and round head.
Make roams. Screw to the ends of the machine bolts crowning nuts so that their teeth performed. Then they sequentially turn on the heads of the pins of the washers on the heads of the bolts to make the foundation.
- Probably, you will have to press the glued washer for a few minutes to the bolt head so that the glue grabbing, otherwise the details can be revealed.
- The rooks are quite powerful figures in ordinary chess sets, they have a wide base and a form that resembles a tower or a tour.
Collect horses. Take the hex nuts and wind them on the machine bolts (1½ "(40 mm long)) up to the middle of the thread. Next, screw the carpet nuts to the bolts to the bolts. Then follow the steps below.

Make elephants. Screw the hex nuts on the machine bolts (2 "(50 mm long)) in such a way that they are removed from the bolt head on its lengths. Slide on the bolt the washer, and turn the cap nut on top. Apply glue from the bottom to the cap nut and press it from It is a washer to glue. Next, follow the steps below.

Collect queens. Screw to bolts (length 2½ "(65 mm)) on the hex nut closely to the head. Apply glue on the puck on one side and get them on the hexagon nuts. Then screw them on the bolts over the second hex nut so that they turn out to be about 6 mm above. The first washers, and then turn on them the second washers. Next, follow the steps below.

How to make a chess board with chess plates. Master class with a detailed description

Berdnik Galina Stanislavovna, primary school teacher COU Koumo-Ugra "Larryakovaya boarding school for students with disabilities".
Description: Chess is not only a game that delivers many joy, pleasure, but also effective, effective tool their mental development. The process of learning Azam chess game contributes to the development of the ability to focus on the plane, the development of analytical synthetic activities, thinking, judgment, conclusions, teaches a child to memorize, compare, summarize, anticipate the results of their activities and practice has shown that a competently built chess learning process gives a lot and gifted children, and conditionally ordinary, and weak, and children with various functional disorders. Therefore, to start learning a wise game is preferably as soon as possible, but, of course, at the level available to the child.
In the master class provided detailed description Production of paper chess game and chess pieces of paper using a magnet.
Purpose: The finished demonstration material is necessary in the lesson when studying any topic of the chess subject.
Purpose: Making a demonstration material for chess.
Tasks:
1. Repeat the concept of "Figures on the Plane". Development of design abilities.
2. Development of children's ability to visual modeling.
3. Raise a desire to perform the product with your own hands.
4. Educate the habit to work independently, neatly, bring the work started to a logical completion.
5. Develop composite skills and aesthetic feelings.

Materials and tools:
1. Paper for drawing A-4 or Watman.
2. Colored paper, corrugated cardboard.
3. Rule (50cm), pencil, scissors, cutter.
4. Magnets, tape, glue.

Description of the manufacture of visual benefits
Chess and Chess Board.
1. For the manufacture of chessboard, prepare 2 sheets of paper for Drawing A-3. Standard size Sheet 42 cm by 29.7 cm.
The photo shows half a chessboard. For ease of storage of benefits, prepare two parts. They were glued with the wrong side of a wide scotch strip.
Also, you can make a chessboard from a solid piece of watman sheet. After pencil markings on the base of the squares, prepare pieces of paper of black or gray. Make sure that the black square matches the markup on a white sheet of paper.

The color of the chessboard is not important. You can combine yellow and brown or yellow and green.
2. Each half of the chessboard was glued with a dense white strip of paper. On it we will place letters and numbers to determine the location of chess pieces.

3. You can print on the printer, you can nicely write a marker or marker on a white strip of a chessboard.

4. Placed and neatly glued, on the appropriate place, numbers and letters.

5. For greater aesthetics, it was edged with chess fields of a thin strip of corrugated cardboard.

Here, you can closer to the corner of the chess half.

In the same sequence, we produce the second half of the chessboard. Halves connect from the wrong side of the scotch.
Now, you can fix on a metal chalkboard with the help of magnets.

6. We will proceed to the manufacture of chess pieces.
Pre-perform a printout on the printer of the figures used in chess.
Chess pieces patterns:

Figures can be different color Gamma. and forms such as such:

We were more like a streamlined form of gray-yellow shades.
Printed thin sheet of paper Stick to a dense cardboard.
Each figure is sting to "illuminate" wide scotch. This will give strength and longitude to the use of didactic material.
Important advice! If you decide to use Scotch, then you first need to glue it, directly to the figure, and only then cut. Thus, the contour of the figures will be smooth and durable, and the items themselves will look neat.

7. From the wrong side of each shape, glue a piece of magnet. You can use the "moment" glue.

8. Our figures are ready to take the initial position of the chess game.

Type of chess troops closer.

We use this demonstration material at each lesson.

You can call moves, rearrange the figures, solve any logical tasks. Explain and find ways to solve winning moves.
Thank you all for your attention! I will be glad the usefulness of the material provided.

Chess is one of the oldest and majestic games. They adore people of all ages and social statuses. This game was invented in India and quickly distributed it to all continents and countries. The chess fell in love with whole generations of people because of their unpredictability and variability. Nowadays, in this game, there are many international competitions. Thousands of people from all over the planet are fighting for a chess crown.

This game helps to develop logical thinking And the ability to calculate your actions in advance. Chess make from the most common different materials. There are figurines made of gold and other noble metals, valuable wood, crystal, ivory and other expensive materials. Since most such chess do not afford, you can buy made from the most simple Materials Or make it yourself.

Chessboard

For its manufacture, you will need the following materials:

two white sheet of paper A3 format;
scotch;
pencil;
line.

Procedure:

This board is best put on the table or attach to the magnets to the metal board.

Chess made with your own hands

Any variation of the game provides for the presence of 16 white and so many black figures. Play on the board, drawn on 64 equal squares.

Figures can be made from such materials:

wood;
clay;
paper;
plywood and others.

Before starting making, you need to understand how to make a chessboard from paper.

From plywood

One of the easiest and most sought-after creation options for the creation of chess is to drinking figures from plywood.

The process is as follows:

Instead of classic figures, you can cut chess with your own hands for children. As objects there may be characters from cartoons, fairy tales, games.

Polymer clay figurines

The polymer clay is ideal for the manufacture of durable and bright items. Created with her crafts on the topic of chess will be beautiful and originally looked and will serve you for many years.

To make chess, you need to perform such actions:

Plasticine can also be used as a chess material..

Wooden chess

To create wooden figures you will need the skills of the carver or joiner. A newbie can take a simple branch as a workpiece and make a cylinder out of it. Then cut on them simple distinctions. This work can be done using the chisel or acute knife.

If you are a professional cutter, then everything that limits you is your fantasy. Threaded from the tree you can create stunning beauty and bizarre on the shape of the figure. Molded chess masters are often sold at auctions for huge money.

In addition to chess, wooden checkers look beautifully. They are made according to pre-thought-out and selected sizes. Such figures always want to play several parties. You can also make a carved backgammon from the tree with their own hands, the drawings and the dimensions of which will not be very different from the checkers.

Paper figures

This version of the manufacture of figures is the easiest and cheaper. To make it necessary, you will need to do the following:

If you use a flat board on the table, then the magnets to the figures can not be glued. Having learned how to make chess, it is easy to guess how to make checkers with your own hands from paper. To do this, you need to repeat all the same actions, only with checkered templates.

Paper strips

Each day the manufacture of figures is gaining popularity with the help of the fusion technique. Chess are no exception. In order to twist them of paper strips, you need to do the following steps:

Make chess with your own hands is quite simple and interesting. No matter what method you choose, the main thing is that it will help you join the great game.

ATTENTION, only today!

Unusual? Yes. Elegantly? Yes. Conveniently? Yes. Thanks to a new design with shelves for figures, you can not only enjoy the ancient game at the table, but to carry out chess tournaments in front of the audience.

We start with cells

1. Of the 6 mm birch plywood, cut four blanks with dimensions of 83 × 610 mm for dark cells BUT and six blanks with dimensions of 51 × 610 mm for light cells in (Fig. 1).

Note. We chose the birch fane due to the lack of emptiness in it and relatively thick facial veneer, allowing small chamfer on the edges of the cells.

2. Spread together two pieces of 19-millimeter MDF-slabs with dimensions 152 × 152 and 64 × 152 mm so that M-shaped stop limiter (Photo a).Secure this stop clamp before the saw disk and adjust its position with the help of a billet for light cells INTo freeze the segments of 51 mm long. Then make 32 dark cells BUT 51 mm long. The balance of the workpiece for dark cells use as a template for a new stop adjustment setting. In the same way, cut 32 bright cells in 83 mm long.

Laying the workpiece for light cells in near the saw disk, adjust the position of the longitudinal (parallel) stop so that the stop-limiter from the cropping billet, as shown on the left. Fix the longitudinal focus and pump up 32 parts from the workpiece for dark cells A, making its end to the stop-limiter, as shown on the right.

3. Make small chamfer on the front of all cells A, B. With the help of a grinding pad or a small ruble. Then proceed to the tinting of dark cells (see section "").

Follow the game field

Cress the cells A, in one, applying a separate clamp for each of them. MDF-stove trimming them, fixed by clamps parallel to the edge of the backdrop of S.

1. To determine the width of the back FROM, dock in one row four dark and four light cells A, B., Measure the length of the row and add 12 mm. From 6 mm MDF plate drink backdrop FROM specified sizes (Fig. 1).Spend the lines parallel to one short and two long edges, retreating from them 6 mm to designate the boundaries of the playing field. Enclose the first series of chess cells along the top edge of the backbone, starting with light cells in the upper left corner (Photo from).

2. From walnut boards, drink seven 6mm planks for the shelves D.. Glue the edge of one shelf to the backup with close to the first row of cells A, in (Fig. 1).

Carefully install the clamping device so that the cells A, B do not move, and by compressing its ends of the clamps, leave before drying the glue.

The sizes of cells A, B and shelves D may differ from the specified, so the position of the shelf G may change. Mark it on the walls of the housing after assembling the game field A-D.

3. To glue the next series of cells A, B., Make a clamp, bonding two bar sizes 38x76x457 mm with a 12-millimeter spacer at one end (PhotoD.). Keep glued cells and shelves D. To the back FROM Before completing the assembly of the game field. Note. Apply the glue with a thin layer to avoid squeezed outexceptions, due to which clamp can be glued to cells.

Framing of chessboard

1. Of the 12-mm nuts, drink the side walls on the specified dimensions. E., top bottom F., shelf G., cornice N.Base I. and Fallepal J.. Choose a pin with a depth of 6 mm on inner side side walls, tops and bottoms to insert a back FROM (Fig. 1 and 2). Then drink 12-millimeter folds along the side walls.

2. Insert the playing field A-D. in the spool of the side wall E., aligning the top number of cells A, B. With the top fold with the shoulder. Mark the position of the shelf G. (photo E).Put the grooves in both sidewall walls to insert the shelves.

3. Dry (without glue) Collect the body to check all parts surrounding the playing field, and pon them, if required. If the dry assembly has passed successfully, apply glue and fix the body of the clamps.

Short advice! D.to gluing the case will need a lot of clamps, so it is advisable to divide this operation to the steps: first glove the shelf and the game to the side wallsthe field and then insert the top and bottom.

Add a drawer for figures

1. Of the 6 mm walnuts, drink the side walls TO, front and rear walls L. and bottom M (Fig. 3).Make 3-millimeter tongs and grooves in the walls of the box (Fig. 3and 3a, photosF.). Then cut the 3-millimeter folds along the ends of the front and rear walls, as well as around the perimeter of the bottom. Having broken the box, check the details connections, then glue and fix the clamps.

2. When the glue dries, tilt the saw machine to the angle of 35 ° and describe the back of the drawer on top (Fig. 3a).By again installing a saw blade vertically, take a dropped first Falpal J. and make in the middle of the transverse cutting depth of 3 mm (Fig. 3).Enclose the rashboard to the front wall L..

Wrap the drill with a piece of painting scotch, retreating from the tip 19 mm. When the flag touches the board, the desired depth of the opening will be achieved.

With one setting of the saw machine, you can cut off not only the tongs in all walls of the box to, L, but also the grooves in the side walls of K.

3. Insert the boxes into the housing A-G. And drill holes for axial pins, which will be installed later. To the box freely rotate, put a laying for it with a thickness of 1.5-2.0 mm (we used the steel line) and fix one side by small wedges. With the help of a 6 mm drill with the central edge, make a hole in a depth of 19 mm (Fig. 4, photoG.). Then make the same hole on the other side. Drill 3-millimeter holes in Fakes J to install the handle buttons (Fig. 3).

Add decorative details

1. Overweight filings with a radius of 10 mm along the ends and the front edge of the eaves N.. Stick it from above to the case, aligning the side skes (Fig. 1).Call 10-millimeter roundings on the external ribs of the base I. And glue it to the body from below.

2. Make two mounting strips N., sawing a piece of whiteboard size 19x152x406 mm along an angle of 45 °. Stick one of the planks to the backdrop (Fig. 2).

3. Apply a colorless coating with a spraying method (we used the semi-axle nitrolac), and after drying, set the knobs-buttons.

Short advice! Before installing brass axial pins, insert the wooden warschits instead and make sure the box rotates freely.

Prepare two 19-millimeter brass pin with a diameter of 6 mm and insert them through the walls of the walls. E. In the axial holes of the drawer J-M.. Finally, fasten the remaining mounting bar on the wall. N. For the suspension of your game board, arrange chess pieces (no more than 76 mm high) and invite rivals to the tournament!

How to make chess cells dark

To get deep and rich dark color On light wood, such as birch or maple, does not hide with the texture, use a combination of dye and veil. This is how we stained dark cells A: With the help of a foam brush or fabric, a water-soluble aniline dye of the Color of Cuban Mahagony was abundantly inflicted, gave him to absorb them, and then wiped out the excess liquid. Water causes a lifting of a pile on wood, so after drying, we slightly polished the details of the emery paper No. 320, before applying the dye once again. A few hours later, when the surface of the parts is completely dried, abundantly caused a morifer-gel tissue tampon, gave her to absorb themselves for a few minutes, and then wiped the surplus and left for drying overnight.

Chess is one of the most mysterious and greatest games of all time and peoples. The hungry of ancient mystery, black and white figures continue to disturb the minds of a huge number of people across the planet. The favorite occupation of Sultanov, Kings, Shakhov, Emirov and other strengths of this world did not lose relevance and these days.

Great game

Chess helps learn to think logically, verified, calculate their actions and actions a few steps forward.

There are various variations of materials for figures and boards: they could be made of gold and other noble metals, black, red or ebony, ivory, crystal, inlaid or decorated with precious stones, pearl and gems.

Similarly, many versions of execution are known: in the form of battle armies belonging to a particular historical era, in the form of famous people, various animals, characters of favorite films, etc.

However, chess order remains unchanged - 32 figures (16 white / light and 16 black / dark) on the field with the corresponding cell markup in 64 squares.

It is not necessary to smoke on gold chess, because today they can be made literally from anything. If you can cut on a tree, then it's pretty easy to cut wooden figures with your own hands. It is even easier to cut them out of plywood or glue from thick paper on a stencil.

Special craftsmen make chess sets from the insides of the computer (motherboard under the board and chips in the form of figures), from electronic vacuum lamps, from plastic, glass, on LEDs or neomagnets, etc. Include your fantasy - and forward.

How to make chess do it yourself: manufacturer

One of the most popular models of homemade chess technology is their drinking from plywood.

Take sketches of the figures, a ruler, pencil, rail, fane and copy paper. You will need to transfer images to Phaneur first. To do this, put a copy paper for a sketch and take care of all the figures in full quantity with a pencil.

The next step will be drunk by the jigsaw of flat figures that you painted. The holes will also have to cut off, making their pre-marking: their thickness must match the thickness of plywood, and in length they must coincide with the length of another product. The hole can be done with a drill or sewn. In places of compounds, it is better to leave a stock in 1 mm so that the figures sat down tightly.

You should get 32 \u200b\u200bfigures and stands with holes - in the same quantity, and another 30 round-baked blanks for future checkers. All will need to be splashing with the emotion paper.

Next, proceed to the assembly. Attach the figures to the standings using glue.
Then separate the half of the elements and paint them with black acrylic paint. Leave them for a while so that the paint dried.

The chessboard can be made from a piece of plywood (a thickness of 4 mm is suitable). Also need rails. Drink two blanks (400 * 200), and make the frames from the rails - in the same quantity and in the same sizes. Propinate plywood blanks to them, and there are hinges between the halves so that the board is well open and closed. With the help of the stencil, apply numbers on the surface of the board, letters, make a "cellular" markup. And inside the board you can draw marking markup. Side pieces faster red acrylic paint.

For figurines, take the phaneer, 3 mm thick. Make sure that there are no cracks or bitch. Varnish in two layers so that the outlet color is more presentable.

So that chess are voluminous, you will need more skills and skills, since without carving on the tree it is not necessary. For a light side, you can pick up such rocks: the male, birch, ash, maple, ram, and for the dark - a nuts well, eben, apple tree and others. If there is no possibility, then it's easier to make all the figures from the linden, for example, and then burn or lacquer.

Using the "Dutch" thread, you can do and without turning machine. To do this, you will need square bars different sizes: Blanks for future shapes:

cut from cardboard stencils Chess and transfer them to the verge of blanks (you will need two types for the horse - on the side and in front);

to get the profile of the feet of the shape, drill it by closing the workpiece in vice (for different figures you will need drills of different sizes);

drink the figures on the outlined lines using the jigsaw (follow the profile of the adjacent faces and leave the bridges on them);

carefully cutting out all the figures, remove excess wood and process the surface with a file (you can grind with the help of an eye);

finished chess must be impregnated with hot oil and coat with appropriate varnish (black figures will first need to be tinting the veil). So that they stand better on the board, you can put the pieces of felt, plush or thin suede on the legs.

Having a desire and fantasy, chess is easy to do from paper using origami technique, and from wine crusts or bottled plugs, and even loose from plasticine.

Some nuances

A set of chess can be very large: such figures are considered outdoor or garden. That is, they can be placed as an element landscape designto play a party one-friend on fresh air. There are also mini-kits that are easy to take with them on the road or journey.

But the most common figure of the figurines is the classical measurement: the king has a height of about 7-10 cm, and other figures decrease in size, depending on what they rank. Consider the height of the base when working.

As you can see, do it yourself chess quite simple. It doesn't matter at all, what material or theme you will be avoided for your set, the main thing is that it will be created with love and soul, and therefore "Royal Game" a little disperse your innermost secrets ...

Source: ToySew.ru.

Source: http://tehnologi.su/kak-sdelat-shahmaty-svoimi-rykami/

Chess on the wall do it yourself

We start with cells

1. Of the 6 mm birch plywood, cut four blanks with dimensions of 83 × 610 mm for dark cells BUT and six blanks with dimensions of 51 × 610 mm for light cells in (Fig. 1).

Note.We chose the birch fane due to the lack of emptiness in it and relatively thick facial veneer, allowing small chamfer on the edges of the cells.

2. Spread together two pieces of 19-millimeter MDF-slabs with dimensions 152 × 152 and 64 × 152 mm so that M-shaped stop limiter (Photo a).

Secure this stop clamp before the saw disk and adjust its position with the help of a billet for light cells INTo freeze the segments of 51 mm long. Then make 32 dark cells BUT 51 mm long.

The balance of the workpiece for dark cells use as a template for a new stop adjustment setting. In the same way, cut 32 bright cells in 83 mm long.

Laying the workpiece for light cells in near the saw disk, adjust the position of the longitudinal (parallel) stop so that the stop-limiter from the cropping billet, as shown on the left. Fix the longitudinal focus and pump up 32 parts from the workpiece for dark cells A, making its end to the stop-limiter, as shown on the right.

3. Make small chamfer on the front of all cells A, B. With the help of a grinding pad or a small ruble. Then proceed to toning dark cells (see section "How to make chess cells with dark").

Follow the game field

Cress the cells A, in one, applying a separate clamp for each of them. MDF-stove trimming them, fixed by clamps parallel to the edge of the backdrop of S.

Spend the lines parallel to one short and two long edges, retreating from them 6 mm to designate the boundaries of the playing field. Enclose the first series of chess cells along the top edge of the backbone, starting with light cells in the upper left corner (Photo from).

2. From walnut boards, drink seven 6mm planks for the shelves D.. Glue the edge of one shelf to the backup with close to the first row of cells A, in (Fig. 1).

Carefully install the clamping device so that the cells A, B do not move, and by compressing its ends of the clamps, leave before drying the glue.

The sizes of cells A, B and shelves D may differ from the specified, so the position of the shelf G may change. Mark it on the walls of the housing after assembling the game field A-D.

3. To glue the next series of cells A, B., Make a clamp, bonding two bar sizes 38x76x457 mm with a 12-millimeter spacer at one end (PhotoD.). Keep glued cells and shelves D. To the back FROM Before completing the assembly of the game field. Note.Apply the glue with a thin layer to avoid squeezing excess, because of which the clamp can be glued to the cells.

Framing of chessboard

1. Of the 12-mm nuts, drink the side walls on the specified dimensions. E., top bottom F., shelf G., cornice N.Base I. and Fallepal J.. Select a pin with a depth of 6 mm on the inner side of the side walls, tops and noses to insert the back FROM(Fig. 1 and 2). Then drink 12-millimeter folds along the side walls.

2. Insert the playing field A-D. in the spool of the side wall E., aligning the top number of cells A, B. With the top fold with the shoulder. Mark the position of the shelf G.(photo E).Put the grooves in both sidewall walls to insert the shelves.

Short advice!For gluing the case, a lot of clamps will be required, so it is advisable to divide this operation to the steps: first glue the shelf and the playing field to the side walls, and then insert the top and bottom.

Add a drawer for figures

Wrap the drill with a piece of painting scotch, retreating from the tip 19 mm. When the flag touches the board, the desired depth of the opening will be achieved.

With one setting of the saw machine, you can cut off not only the tongs in all walls of the box to, L, but also the grooves in the side walls of K.

With the help of a 6 mm drill with the central edge, make a hole in a depth of 19 mm (Fig. 4, photoG.). Then make the same hole on the other side. Drill 3-millimeter holes in Fakes J to install the handle buttons (Fig. 3).

Add decorative details

3. Apply a colorless coating with a spraying method (we used the semi-axle nitrolac), and after drying, set the knobs-buttons.

Short advice!Before installing brass axial pins , insert the wooden warschits instead and make sure the box rotates freely.

How to make chess cells dark

To get a deep and rich dark color on light wood, such as birch or maple, do not hide with the texture, use the combination of dye and sampling.

This is how we stained dark cells A: With the help of a foam brush or fabric, a water-soluble aniline dye of the Color of Cuban Mahagony was abundantly inflicted, gave him to absorb them, and then wiped out the excess liquid. Water causes a lifting of a pile on wood, so after drying, we slightly polished the details of the emery paper No. 320, before applying the dye once again.

A few hours later, when the surface of the parts is completely dried, abundantly caused a morifer-gel tissue tampon, gave her to absorb themselves for a few minutes, and then wiped the surplus and left for drying overnight.

Source: http://stroyboks.ru/cvoimi-rukami/mebel-svoimi-rukami/shahmatyi-na-tene-svoimi-rukami.html

How to make chess do it yourself?

The most ancient game, which has about 1500 years, has not lost its popularity and in our time. Chess love both adults and children. Invented in India, the game quickly spread almost all over the world. She loved what demands a logical decision of the tasks, there is a moment of competition, many variations. Champions sports facilities are attracting the attention of the world community.

A variety of chess

Over time, people began to fantasize and produce chess with their own hands from different materials. Traditional figures are replaced by the most diverse heroes. These are the characters of popular films and cartoons, famous athletes and political figures, animals and geometric shapes. The size also varies from the minimum, which can be viewed in a magnifying glass to a gigantic king of 4.5 meters. There are desktop, road, huge park, gift.

Materials from which manufactures this popular game, also affect the imagination with their diversity. Starting with paper and cardboard shapes to gold, decorated with precious stones. Modern masters and designers compete in creative approaches to this process. Chess can be glass, wooden, plastic, clay, bone.

Their masters are made from computer spare parts, bolts, engine parts of the car and another throwing material. Chess makes adults and children, professional designers and workers in the enterprise. Wooden carpets and carvers make unique works of art. Jewelers are preparing gift sets for high-ranking specials.

Chess do it yourself from polymer clay

One of the most popular materials for the manufacture of various crafts in our time has become a polymer clay. The material is bright, durable and durable. Especially the child will like the game if the figures are not ordinary traditional chess, and the heroes of favorite cartoons or fairy tales. How to make chess do it yourself from polymer clay? You can buy a set in the store of children's creativity.

Before modeling clay, you need to carefully remember. The longer to mive, the softer becomes the material. The figure of any character is painted, at the request of the kid himself. To cut out small parts it will take a stationery sharp knife. When the figure is ready, proceed to yourself an important moment. So that the clay becomes durable and solid, it must be baked in the oven. For firing, a temperature of 130 degrees is required.

Put the figures better on ceramic tiles, In the extreme case, you can put parchment for baking on a metal baking. It is advisable for dense items to fill out with another material, for example, a confused foil. Then the clay has a thinner layer and binds better. Bake an average of 20 minutes. This is specified in the instructions for use.

Paper figures

Making chess with your own hands from paper can even be able to make a child. Here is also a lot of manufacturing methods. These are origami, cardboard figures according to schemes, quilling, glued paper, on a solid stand. Consider how quickly make paper figures like the desktop theater.

Cardboard is taken white and, for example, red. It is folded in half so that the fold is on top of the picture. A simple pencil draws a silhouette of a chess piece. Downstairs remains an extra square to base on which the subject will stand. On the contour with sharp scissors, the picture is cut and the two pieces glued together. The squares of the base are flexing in different directions and paste for stuff on a solid basis. All, figure is ready. The rest are made under the stencil.

Paper Striped Figures

Now the production of crafts in the Quilling technique is very popular. In stores for creativity, soldes of thin strips and hooks are sold, from which you can do different pictures. Here and chess are easily twisted from strips of paper. For this you need PVA glue, twigs of a queen of two different colors and holder. Pawn make just. Screws tightly around the hook layers of the strip and glue the edge to the rest. It turns out a tight twisted cylinder, similar to a checker.

The rest of the shapes do, drawing on the fantasy of the master. An elephant or officer is manufactured just like a pawn, only at the end pulls the hook along with the paper gently up, the cone shape is obtained. Queen can attach hands and glue the head to the top of the cone, twisted separately.

For the tours, you can twist several circles of different sizes and glue them so that the turret formed. The most complex element will be the manufacture of horse figurines. On the previously described cone, they put on the screening line for a quillee triangle.

The mane is glued on the back of the category, having cut the ribbon with scissors by the type of fringe.

Models from wood

Making chess with your own hands from wood and beginners to lovers, and professional joiners, and skillful lean. Traditions of each country can be seen in the figures and design of the board. Here and warriors from Russian fairy tales, Ukrainian Cossacks, Indians with spears, Norwegian Vikings. Special attention masters are given to the design of the board. It can be a table with a drawer for figures, a ship, veneering from different varieties A tree or a set of canvas of carved squares of different wood species.

How to make chess with your own hands from a tree master decides on the basis of your skills and fantasies. Beginner lovers for the country option can use a thick branch of a tree, making a different-sized penette with carved non-hard patterns. To do this, you will need a sharp knife or chisel. If you have a jigsaw or electric copies, you can cut the columns of different height from the bar, making small labels on the sides of the main figures.

Having made the chess with their own hands from the tree, professional cutters expose them to contests and occupy prizes. The price of some works of art reaches several thousand dollars. Not only the quality of the work performed, but also the transfer of traditions and the history of the people, the originality of the execution is valued.

Develop the creative abilities of children

Children from an early age love to invent, fantasize, play. Making together with the guys chess, parents and teachers develop not only the creative principle in children, but also practical skills and skills. Working with paper, wood or clay, kids get unforgettable emotions. And if working together with adults, the children acquire valuable experience in communicating and labor skills. The pleasure of playing such homemade chess cannot be compared with anything.

Learn to fantasize, work with your hands and blow the party head. Comprehensive development your children is guaranteed!

Did you like the article? Share it

Print article