Bottom pd 10 volume of concrete. Road plate PD10

We provide delivery to any region of the Russian Federation. We fulfill delivery obligations regardless of the size of the consignment and the number of commodity items, the destination and the state of the transport network in the recipient's region.

"Prom ZhBI" every day sends dozens of tons of reinforced concrete products to different parts of the country. Our regular customers are large contractors from Kaliningrad and Vladivostok, Arkhangelsk and Belgorod, Nizhny Novgorod and Astrakhan. The constancy of orders that construction companies and operating organizations make at Prom-ZhBI is due to:

our compliance with the terms of delivery (terms, nomenclature and quantity of reinforced concrete products)
efficiency in order processing
compliance with the rules for the transportation of reinforced concrete products
vast experience in organizing the transportation of reinforced concrete products, which allows you to avoid force majeure on the way
well-established logistics system (we choose the most convenient and inexpensive delivery options)

With us you will always receive the ordered materials on time. We organize the delivery of any goods made in our production.

The low price for the entire range of products manufactured by the company is complemented by affordable delivery costs. At the same time, the Prom-ZhBI company takes care of all the organizational chores. We control:

order picking and shipping
route and travel time
delivery time to the destination and completeness of the order at the unloading point

Regardless of the region in which you are located, delivery is organized as quickly as possible: wherever you expect the cargo, it will arrive to you on time and without any effort on your part.

Description

Product Description

The base plate PD-10 is a reinforced concrete product designed to support a well hatch. The element is used when laying urban communications during the laying of roads - water, network, gas, drainage wells, communication lines. Products are produced in a rectangular shape with a recess for supporting the well cover and a hole of the required diameter.

Slab PD-10 is made of heavy high-strength concrete and reinforced with prestressed reinforcement. The element is distinguished by strength, durability, frost resistance and increased resistance to corrosion.

Marking plate PD-10

An alphanumeric designation is applied to the surface of the product. The first group informs about the element type, followed by the hole diameter. The second part contains information about the vapor permeability of concrete and special design characteristics (niches, cutouts, embedded parts).

Application area

The base plate PD-10 is tested in all parameters, the data of which are entered into the technical passport for each batch. The product is used in the installation of wells for various purposes and prevents the subsidence of the structure, the penetration of precipitation and debris into the structure.

* Delivery price is indicated to Moscow, taking into account the full load of the car More

Question answer

- Shipping cost?
Delivery is calculated based on the remoteness of your object, from the warehouse, as well as the tonnage and dimensions of the products.

- Where are you taking it from?
Delivery is carried out directly from production. Production facilities are located throughout the central region, and before entering our network, it undergoes strict quality control by the legal, accounting and quality departments.

- Where is the post office?
For the convenience of users, we have made a system for distributing the load on managers, if mail is checked by 1 person, this significantly slows down work or even leads to the fact that read letters are lost. You can leave a request through the form at the top of the site “Leave a request”, it will go to a free manager and you will be called back within 5 minutes.

- Do you have a mobile number?
For the convenience of users, we have made a system for distributing the load on managers, if a mobile phone is specified, then only 1 person can talk on it, and it will be difficult to get through to him during the season.

- Why so expensive?
The price of a product consists of several components, the main of which is the cost of the material, which determines the quality of the final product. There is also a factory margin and a trading company margin, we work on the terms of a dealer discount, therefore we do not have a margin separate from the factory, we earn on the fact that the factory shares with us part of its profits, and we, in turn, provide the factory with volume to ensure uninterrupted operation .

- Why can't you order less than 15 thousand? Do you only work in wholesale?
Some items are made in nearby areas and the delivery of these items adds a significant cost to the product. We have calculated that when ordering more than 15 thousand, the benefit from purchasing products from us becomes greater. If you have a small request for products that are manufactured in your area, it will be cheaper to purchase products at the nearest factories. Unfortunately, at the moment we do not have a single plant in the Moscow region that has passed our quality control.

- Where can I pick it up?
The products are manufactured at different factories, the region and the city can tell you the manager, because the factory is different for each product.

- Why such an expensive delivery?
Delivery is calculated based on the distance of the object from the warehouse of the plant. The shipping cost is divided by the number of items based on the weight of the product, ordering 1 item, the entire shipping cost will fall on it, but if there are 10 items in the order, the shipping cost will be equally distributed among these 10 items.

- Do you work with VAT?
Yes, Beton Project LLC works for OSNO and is a VAT payer. All prices on the website are inclusive of VAT.

- Why is only the office listed on the site, and not the factory?
We are a dealer of factories and carry out our activities at the office address. Because in our list there is a solid number of plants that have passed our check, it is not rational to post all the addresses of plants with products in order to complicate the search for the right plant. If you are interested in where you can take out this or that product, you can always check with the Manager or use our delivery.

- Do you have a warehouse in Moscow?
We do not have a warehouse in Moscow or the Moscow region, because this will negatively affect the value of the goods, because it will entail additional costs.

- What kind of plant? What is the name of?
Products are manufactured at different factories, you can always come to the factory and see for yourself the quality of our products. Also, if you have any doubts, you can pay for the products directly to the factory.

Well bottoms (bottom plates) PD 10 bottom plate are a prefabricated element that is designed to prevent runoff water from entering the ground and ground water into the well system. They are used in water, gas, sewer wells, as well as in the arrangement of drinking wells, septic tanks and cesspools. Products are suitable for use in dry and moisture-saturated subsiding soils.

The reliability of the entire structure depends on the quality of the bottom plate and the correctness of its installation. well bottom PD 10 bottom plate designed to withstand any load despite ground movement and groundwater influence. The size of the product is selected in accordance with the size of the rings, covers and manholes.

Advantages

High level of strength and durability of finished products due to the use of high quality materials
Quick and easy installation due to precise overall dimensions
Resistance to lateral, static and dynamic loads
Simple, labor-intensive maintenance and cleaning
Products are suitable for any type of soil

The slab of the bottom of the well is a reinforced concrete product of a rounded shape. The diameter of the bottom must not be less than the diameter of the outer ring. There are several modifications of plates, differing in height, diameter and weight. For their marking, an alphanumeric designation is used. The selection of modifications is recommended to be carried out with a specialist in order to avoid incorrect calculations.

Specifications

In the manufacture of the bottom slab, heavy concrete class B15 (M200) is used
The frost resistance index of concrete is F100
The water resistance index of concrete is W4
Reinforcement is carried out with steel of class Bp-I or AI-AIII
The products are equipped with mounting loops made of class A-I steel
To be able to use the elements of the well in an aggressive soil environment, in concrete mix sulfate-resistant cement is added, which tolerates reactive and chemical substances well.

Location selection

Before starting the construction of the structure, it is necessary to determine the location of its location. The site must be convenient for operation. During the construction of plumbing or sewer well it is necessary to calculate its volume, depending on daily requirement water and waste disposal.

Mounting

Well bottom plate PD 10 bottom plate is lowered into the shaft first and placed horizontally. After it, wall rings are installed, which are covered with a well cover and a hatch. The joints between the bottom and the wall rings are carefully sealed with a mortar with the addition of cement.

The bottom must be installed evenly, on the prepared cushion and concrete base providing stability to the structure. Otherwise, distortion may occur, which will lead to the appearance of cracks and a violation of the sealing of the well. Before installing the well bottom, it is recommended to examine the soil and determine the depth of the groundwater.

The mark of the axis of the well is verified using a level. Sometimes during installation a slope is created towards the outlet pipe in order to avoid the formation of excess water in the system. Do not forget about the additional waterproofing of the bottom of the well.

The bottom slab bears the weight of the entire structure, therefore it is made of heavy grades of concrete that are resistant to corrosion, moisture and impact. low temperatures. The product is reinforced with steel rods.

Indicators for which acceptance tests are carried out

Brand and class of concrete in terms of compressive strength and tempering strength
Concrete surface quality
Concrete cover thickness to reinforcement
Correspondence of metal and embedded elements
Strength of welded joints
Geometry Correctness

Quality control

It is obligatory to have a technical passport (certificate), which indicates the date of manufacture, the brand of concrete, the compressive strength of concrete, the water resistance and frost resistance of concrete, the results of acceptance tests.

On the surface of the products, shrinkage cracks with a width of not more than 0.1 mm are permissible. Deviations in geometry should not exceed 5 mm in thickness and 6 mm in diameter. A small number of sinks with a diameter of not more than 15 mm and a depth of up to 5 mm is acceptable. Mounting loops should not be hidden behind concrete sags, as this may make installation difficult.

Company experts "DSK-Capital" always in touch and ready to advise you on the issue right choice bottom plates, possible terms of production and speed of delivery to the object!

Call, find out, order!

Road slabs with a hole for the hatch PD 10 These are reinforced concrete products that have received the widest distribution. Almost the entire field of road construction cannot do without such elements. The arrangement of technical structures with reinforced concrete slabs makes it possible to obtain durable and strong structures that are reliable and resistant to various influences. Wells must be covered with special plates with a hole for the hatch -base plates PD 10 . Special shape and hole desired diameter allow them to be used for many types of wells and other technical structures.

1. Variants of writing marking.

Plates with a hole for the hatch PD 10 manufactured in accordance with currentGOST 8020-90 and in the marking indicate the type of plate product and its size range. The spelling of the designation can be done in the following ways:

1. PD 10;

2. PD-10.

2. The main scope of products.

For existing wells often useplates with a hole for the hatch type PD 10 . These elements allow you to reliably block the structure, providing functional protection against the ingress of external debris, falling people or technical equipment into the hatch, protection against soil collapse and other functions. BecausePD 10 are made of high-strength materials, then the finished hatch design, covered with such a plate, is able to withstand high loads - a lot of weight from passing vehicles and equipment.

During operationslabs PD 10 manifest themselves as durable reinforced concrete products, as they are resistant to low temperatures, water or other aggressive media. These products are subject to mandatory processing, as in the road sector (used to organize storm wells on highways and highways) use chloride salts to de-ic the roads. Without chemical and hydrophobic protectionroad slabs with a hole for a hatch PD 10 are not allowed for operation, in a harsh aggressive environment, the elements quickly collapse and lose their strength characteristics. Compliance with the technology of manufacturing and data processing of reinforced concrete slabs makes it possible to show high technical parameters even with prolonged use and in conditions of a changeable climate.

Plates with a hole PD 10 can be used for the installation of drainage, sewer and other round underground wells. The scope of use of plates is not limited to this. Yes, concreteplates PD 10 can be laid in urban communications during the arrangement of drainage, as well as network and gas wells, and in various communication lines. Less commonly, these reinforced concrete products are used to equip airfield facilities and military training grounds.

3. Designation of product marking.

Reinforced concrete road slabs with a hole for the hatch PD 10 mark according toGOST 8020-90 , according to which they indicate in the designation: product type P - plate, 10 - size group. The overall dimensions of the plate are2800x2000x220 , where the length, width and height of the product are respectively written.

Additionally, the permeability of concrete can be specified: "N" - normal. "P" - reduced, "O" - especially low. For product marking, parameters such as geometric volume are also used -1,232 , volume of concrete - 0,99 , mass of the product -2480 . The symbol, weight and date of manufacture of the reinforced concrete product must be applied with indelible black paint on the outer side surface.

4.Basic materials for manufacturing and characteristics.

Plates PD 10 for hatches must be made using vibrocompression technology. Heavy and extra heavy concretes are used as materials. To increase the strength and performance, crushed gravel, fine sand and purified water are used. Concrete must correspond to the compressive strength grade - not less than M200, which corresponds to the strength class - not less than B15. Operation in winter period of these plates is determined by the brand for frost resistance - at least F50 and F100, that is, at least 50 freeze-thaw cycles. Water resistance must correspond to the W2 brand, moisture absorption up to 8% is allowed.

All reinforced concrete products are subject to mandatory reinforcement, which allows the use of slabs in conditions of increased compressive and compressive deformations. Steel frames with bars for reinforcement of At-IIIC and At-IVC classes are used - according toGOST 10884 and A-I, A-II and A-IIIGOST 5781 . Additionally, special mounting loops must be laid in the body of the slab element - according toGOST 10922 . All steel products are subjected to anti-corrosion and chemical treatment, which allows to extend the service life.

Road slabs with a hole for the hatch PD 10 These are reinforced concrete products that have received the widest distribution. Almost the entire field of road construction cannot do without such elements. The arrangement of technical structures with reinforced concrete slabs makes it possible to obtain durable and strong structures that are reliable and resistant to various influences. Wells must be covered with special plates with a hole for the hatch -base plates PD 10 . A special shape and a hole of the required diameter make it possible to use them for many types of wells and other technical structures.

1. Variants of writing marking.

1. PD 10;

2. PD-10.

2. The main scope of products.

During operationslabs PD 10 manifest themselves as durable reinforced concrete products, as they are resistant to low temperatures, water or other aggressive media. These products are subject to mandatory processing, since in the road sector (used to organize storm wells on highways and roads), chloride salts are used to combat road icing. Without chemical and hydrophobic protectionroad slabs with a hole for a hatch PD 10 are not allowed for operation, in a harsh aggressive environment, the elements quickly collapse and lose their strength characteristics. Compliance with the technology of manufacturing and data processing of reinforced concrete slabs makes it possible to show high technical parameters even with prolonged use and in conditions of a changeable climate.

3. Designation of product marking.

4.Basic materials for manufacturing and characteristics.

Plates PD 10 for hatches must be made using vibrocompression technology. Heavy and extra heavy concretes are used as materials. To increase the strength and performance, crushed gravel, fine sand and purified water are used. Concrete must correspond to the compressive strength grade - not less than M200, which corresponds to the strength class - not less than B15. Operation in the winter period of these plates is determined by the frost resistance brand - at least F50 and F100, that is, at least 50 freeze-thaw cycles. Water resistance must correspond to the W2 brand, moisture absorption up to 8% is allowed.

Liked the article? Share it

Print article