How to make a spinner with your own hands: tips for making. How to make a spinner with your own hands without a bearing: the best master classes Spinner drawings from 1 bearing

Teenagers, children and older people, especially the eternally tired and tense "office plankton", have a fashionable toy-twist today. The spinner is designed to relieve stress, keep a person busy for a while, distract from sad and heavy thoughts, and along the way train “sleight of hand”. Today - at the peak of its popularity - a spinner can be bought in almost any store. But you can also make a twist with your own hands from scrap materials and various debris. It doesn't take much time and effort.

What is a spinner?

To understand what to start, you need to understand what a spinner is and "what to eat it with."

The fashionable toy has many names: spinner, hand spinner, fidget spinner, hand spinner. It is a figure with three radial blades.

In the center there is a metal bearing that holds them.

The toy is made from materials such as titanium, copper, brass, stainless steel, plastic. Depending on the material and design of the spinner, the speed and duration of its rotation, the vibration of the sound that emanates from it, depends.

The spinner was invented in the 90s of the twentieth century, but gained popularity only in 2017. At first, the funny spinner went around all the schools in the world - during recess, the students performed various tricks with the spinner. They were even banned in American schools on the grounds that playing with a turntable distracts children from classes and interferes with concentration.

Then the "miracle twist" crawled into the offices. Some believe that it can help to concentrate or, on the contrary, to relax, as, for example, a spinning top or a yo-yo helped before. Forbes representatives called the spinner “the must-have office toy of 2017”.

To "be in trend" - you need to have it. So let's get to work!

Simple ways to make a spinner from scrap materials

Experienced life hackers have long come up with ways to make a spinner from what is at hand. All materials are used, some basic things like cardboard, plastic lids (from soda), buttons, coins.

Despite the fact that the prices for a toy do not exceed a few dollars (the average cost in Moscow is 250 rubles), craftsmen do not give up their attempts to create something creative "of their own". Again, "so that I eat my hands."

Fidget spinner made of plastic caps

This is an easy-to-do craft, which, however, will require some effort and diligence.

In work you will need:

Four covers.
Glue stick and gun.
Plasticine or kinetic sand (if available at home).
Toothpick.
Nail or knitting needle.
Lighter
Scissors.

Sand or plasticine is alternately stacked in three bottle caps - up to the top. This is to keep the blades heavy so the spinner will spin.

The remaining space must be carefully filled with a glue gun.

A hole is made in the remaining lid (using a heated knitting needle or nail) - exactly in the center.

Then three petal caps are laid out around the base with a hole. The same distance must pass between them. How to check? Put another same cover between them.

All three parts are glued with a glue gun.

Two pieces of 1 cm each are cut from the glue stick. One is put on the base of the toothpick, it is passed into the center of the toy. The other end also needs to be "secured" with a rod.

The turntable can be beautifully decorated, for example, painted acrylic paints, they fit well on plastic. The homemade spinner is ready!

step-by-step instruction

Fidget spinner without bearing

For the manufacture of this toy, again, you will not need materials that are difficult to work with or those that cannot be found.

Necessary:

cardboard;
spinner template;
3 coins;
glue;
rod from the handle;
awl;
materials for decoration (paints, rhinestones, etc.)

The hardest thing is to find ready-made template spinner. You can do this on the Internet, or you can draw it yourself using a marker and the same plastic cover (or coin, or buttons) - just lay them side by side and circle.

For work, you will need two blanks made of cardboard.

You will also need 4 smaller circles (for example, circle the smaller coin).

Coins are attached to one of the templates with glue - each on its own blade. These are weights. They should be slightly smaller than the diameter of each circle.

Coins are coated with glue on top and a second blank template is glued on.

A hole is made in the center of the resulting cardboard spinner. It is necessary to insert a rod from the handle into it and cut it off - 1 cm is enough.

In two circles of a smaller diameter, it is also made through the hole.

The other two remain intact.

Before proceeding with the final work, the toy must be painted. Ordinary paints will do - watercolors, gouache - or markers.

You can show your imagination and make a bright model out of the turntable, for example, matching in color to your favorite super-heroes.

You can use rhinestones, Velcro and other elements to decorate. They sit on the glue, but should not interfere with the game with the turntable.

How is the spinner collected? A rod is inserted into one of the small circles. Glue it is necessary to grease its base, insert it into the hole in the toy and press it on top with a second circle.

The remaining two circles are attached from the outside so that the rod is not visible, and the toy lies comfortably in the hand.

The spinner is ready!

step-by-step instruction

There are many other options for making a spinner at home, but the ones presented here are the simplest. Even a child can cope with this task.

Conclusion:

Fidget spinner is a super-fashionable anti-stress toy today. To be in trend, you can make a turntable with your own hands. This does not require money - all materials will be found at home - just a little free time.

Children and adults alike are delighted with the popular toy with bearings - a spinner. There are many varieties of them from various materials. Learn how to make a spinner at home.

How to make a paper and cardboard fidget spinner

To make a spinner with your own hands, you will need certain materials and skills to work with them. The easiest to execute are cardboard and paper models. Their only drawback is fragility and fragility.

You will need:

cardboard;
scissors;
awl;
marker;
silicate glue;
coins of the same denomination - 3 pcs.;
an empty ballpoint pen refill;
gouache paints and glitter.

Step-by-step instructions on how to make a spinner:

Draw a blank on the cardboard. To do this, circle the PET bottle cap with a marker, forming a triangle with a central (fourth) circle in the middle. Cut two identical pieces.
Glue three coins on the "blades".
Glue the second cardboard blank on top.
Use an awl to make a through hole in the center of the workpiece.
Cut off an empty (no paste) ballpoint pen about a centimeter.
Cut out four circles that are smaller than the lids. To do this, you can circle small coins. In two circles, make through holes with an awl.
Insert the centimeter rod into one circle and glue. Then pass the free end of the rod through the central hole of the spinner blank and glue. Push the free end of the rod into the second cardboard circle.
Hide the ends of the rod, for this glue the two remaining whole cardboard circles on top of them.
Paint the craft with paints and decorate with sparkles.

How to make a spinner from plastic lids

Plastic spinners are much stronger than cardboard ones. Children over 8-10 years old will be able to make a spinner out of caps with their own hands. The smaller ones will need the help of their parents.

To make a craft, you will need:

lemonade lids - 4 pcs.;
plasticine or clay;
scissors;
glue gun and glue stick;
nail and lighter;
toothpick.

Step by step description:

Fill the hollow place inside the three lids with plasticine, and fill the top with glue from a pistol.
Make a hole in the center of the fourth lid with a nail. To do this, heat the sharp end of the nail with a lighter.
Glue three lids filled with plasticine on three sides of the fourth with a hole, creating a triangle shape.
From the gun glue stick, cut two one centimeter long pieces.
Break the toothpick exactly in the middle.
Attach one end of a toothpick to the cut off piece of glue stick.
Insert the free end of a toothpick through the hole in the center cover. Hide the remaining sharp tip in another piece of glue stick.
If desired, paint the lids on top with acrylic paints or glue over with appliqués.

As you can see, spinners are not difficult to make yourself. This is a good opportunity to captivate the child for a while and enjoy the result with him.

To create a craft in the form of a fashionable spinner, you will need the usual materials at hand, which you can always find at home. Good luck and creativity!

Fidget spinners entered mass fashion not so long ago, but in just a few months they won the hearts of not only adults, but also children. Today spinners are spinning everywhere: on the street, at work, in the subway and even in kindergarten! And every child wants his toy to be somewhat different from those that his peers already have. You can buy an original spinner, but such a toy is not cheap, and the search for a unique spinner takes a lot of time. The best solution- make a spinner yourself.

So, we bring to your attention a few simple ways how to make a do-it-yourself spinner from materials that every home has.

1. How to make a spinner from plastic lids?

Materials: caps from any plastic bottles of the same size (4 pcs), plasticine, hot glue, a nail, scissors, a lighter and a toothpick.

What do we have to do: put plasticine in 3 lids, use hot glue to glue the remaining space of the lids. Take the fourth lid (without plasticine) and make a hole in it, for example, with a heated nail. Glue the sand caps to the one where you just made the hole. Take a stick of glue and cut 2 small pieces (1 cm) from it. Break a toothpick in half and put a piece of glue on one end of it (make sure that the sharp tip of the toothpick does not stick out) and place it in the center of your future spinner. Place the remaining piece of glue stick on the back of the toothpick tip. Your spinner is ready!

For a more interesting look, you can color the caps in different colours acrylic paints.

2. How to make a cardboard spinner?

Materials: plastic bottle caps, cardboard, scissors, marker, awl or nail scissors, glue, 3 coins and a pen rod.

What do we have to do: Using the lids, draw 4 circles on the cardboard in the shape of your future spinner. After that, cut 5 such blanks and glue them together, carefully gluing the edges. Next, cut out smaller circles. Use an awl or fine nail scissors to make a hole in the center of the spinner. Glue 3 coins or any stickers on the sides of the blanks.

Next, take the deferred pen shaft and carefully cut 1 cm from it. Make small holes in the center on two small circles. Insert the cut piece from the handle shaft into one of the circles and glue it along the edges of the hole to securely fix it. Slide this circle into the center of your spinner and glue the second circle on the back. The two remaining small circles can be glued over the ends of the rod. To make your spinner spin faster, put some kind of spacer between the blank of the spinner itself and the small circles (in our example, we used metal pendants).

Ready! Let the child decorate his spinner as he wants, you can use sequins, stickers, rhinestones and other decorations.

3. How to make a spinner using bearings?

Materials: bearings (3 pcs), tie clamps, glue gun or superglue (for a more complex spinner).

What do we have to do: wrap the bearings on all sides with cable ties. Cut off the extra clamps and that's it - the spinner is ready!

To make it brighter and more attractive, you can make the design more complex. Take 7 bearings, place 6 of them around the seventh. You will not use all 7 bearings, you only need 3 circular and 1 center. You only need the rest of the bearings for accurate measurement, so we will leave only those that form a triangle. Glue all the parts you want with a glue gun or super glue. The spinner is ready! Decorate the spinner as you like. You can glue fluffy wire, apply glue to the sides of the spinner, and cover the edges with glitter.

Rest assured, no one will have such spinners like your child!

Fidget spinner, fidget spinner ... Everyone went crazy. What it is? Where did it come from? And most importantly for what? Today we will try to figure it out ... It was invented by one person. Now the whole world is going crazy, people buy, children like it.

When I was little, I really enjoyed spinning the top. You take out some larger gear from your old watch and start turning - who has the longer? Sound familiar? You sit and watch .... Remember your feelings in childhood.

About the same sensations I get when spinning a spinner. You twist and watch. And the spinner is, in fact, a top. Only the top is on the axis. And the spinner is twisted in a horizontal plane. Anglo-Saxons love to use the word "spin" (to rotate, to rotate).

They have "spin" everywhere - from quantum mechanics and physics - to such a simple thing. Terribly simple. And we have a top, and many other analogies ..

Whoever rewound the cassette with a pencil does not buy a spinner!

Time does not stand still. Our children no longer know about all kinds of tape cassettes, tops. Here is such a newfangled thing. And there is every reason to think that the spinner will soon turn into a style element. Maybe soon we will see spinners not only with LEDs, but also golden ones, with rhinestones, maybe even with bruliks ..

Now is such an interesting time, you can expect anything. If there is a demand for platinum spinners, I would not be surprised. Online stores are already selling products for 3000 rubles ...

Fidget spinner - what is it, what is it for and why is it needed?

Structurally, the spinner is very simple. Imagine a star with a bearing in the center. The petals of the star are balanced. In each beam, you can also insert a bearing. And twist to yourself. Let's add some brightness with the help of bright colors and now, the spinner is ready.

It is needed, of course, for entertainment and during idleness. If you are in a "trend", then of course, in order to remain fashionable and stylish. It was originally conceived as an anti-stress sedative. Which is true. It can be twisted in different ways - on a table, in fingers, on one finger ... While it is spinning, you watch how it does it, and your head at this moment becomes completely empty ... And this is a rest, friends. Let it be for a moment, but rest.

All your attention turns to the spinning petals. Maybe for this reason, in our age of stress, this simple children's toy has become so popular all over the planet ... Who knows? Children are very fond of spinners for their brightness and for this very ... Now many sellers serve this attractive product as a kind of "tool". Here's what the sellers write:

develops motor skills and increases the sensitivity of the fingers. Products are especially useful for restoring hand performance after various injuries and fractures of the hand;
the device has an anti-stress effect: it helps to concentrate, eliminates anxiety, relieves a nervous emotional state and irritability;
the toy will be a great way to take time when traveling by transport or while waiting in a long line;
stimulates the development of manual precision.

So, if you want to relax and get an expensive exclusive product, then go ahead to online store... I am sure that they are looking forward to us there. But Russia is such a unique country. Our man sometimes cannot reconcile himself to go and buy this simple thing. Our man does it himself.

Because when you did the Thing yourself, (even the simplest one), you have a completely different attitude to it. Such a thing, for example, is always a pity to throw it away ... By the way, when you make something yourself, it also sometimes relaxes and distracts. We will make a spinner with our own hands to distract ourselves and experiment 🙂

How to make a do-it-yourself spinner from scrap materials?

Friends' materials can be very different. But the principle is one - there is a bearing in the center. In order to ensure long and easy rotation, the toy must be balanced, and the bearing must not contain thick grease. Here is one of the manufacturing options:

You need to buy four bearings (three will be as counterweights)

You will need a drill for wood, (feather) with a diameter the same as the bearings:

Also - we need the material itself from which the body is made. It can be anything you want. The main requirements are strength, and easy processing.

We mark the material with a pencil like this:

We continue to rotate the drill (the same spinner):

Let's make additional holes with an ordinary drill (for an intricate design):

The workpiece should be drilled like this:

And before planting the bearings in it, look something like this (if you can work beautifully, you need to try to round the corners somehow):

It is necessary to prepare the central bearing, remove the factory grease from it.

After removing the protective covers from the holder, rinse it in gasoline or acetone:

Then you need to use a suitable glue (not all plastic is glued with superglue!) Epoxy or other glue, carefully glue the bearings into place.

Something like this:

Here is such a brutal, "masculine", harsh spinner turned out.

We watch the video on making from start to finish:

As you can see, everyone is experimenting as they can :) :). There is no limit to perfection! There would be a desire. Both samples spin well. More effort will be spent on good design... Hooray!

How to fix a spinner if it is broken or rusted?

According to my feelings, the purchased spinner cannot be broken. The bearing is pressed into a metal housing; counterweights glued or pressed in. The weakest link is the bearing. It can rust if kids drop it and rinse it in water.

It is clear that if the spinner is homemade, as in the example, we simply lubricate and develop the bearing until all the rust peels off. We glue the bearings that have flown out again with normal glue. In severe cases, we use and lubricate the rust converter until the previous "driving" qualities return. In the case of a purchased spinner, carefully remove the lid or cap that is always present there:

We apply liquid household lubricant for locks to the clip and so on. If there is a lot of rust, you can throw it into a jar of oil, let it lie down .. Here is the whole repair.

Origami paper spinner - without bearings and glue, how to make?

In the wake of the general enthusiasm for toys, experiments continue. Someone again connected two different directions and spinners began to be made out of paper as well. By the way, just such crafts develop motor skills and everything else in children.

Therefore, you can captivate your child just by making such original things. From paper, it will be safe for the child. True, slightly disposable. Colored paper:

First action:

Second action:

Third action:

Fourth action, axis:

The fifth action, the "bearing" is the same made of paper, which confirms that the Japanese are creative people 🙂

To figure out what's what, watch the video.

Nice. And it's fun to do that kind of thing.

How to make a spinner from plastic bottle corks with your own hands

Our people are talented and savvy. All to the farm! We don't throw anything away! We choose brighter and newer!

It's simple, the principle is the same, the material is different.

We do it once:

We do two. You need to drill and clean a hole in the bottom of the lid, and glue:

We glue only three plugs, the rest are used to align and symmetry the first three. It should look something like this:

It is necessary to bring everything into a divine form and then start assembling the product. We also rinse the bearings in acetone and then collect them.

When everything is inserted, glued, we check:

It works .. 🙂 But, friends, this is the easiest way. There are completely exotic but interesting ways making spinners from plastic stoppers... Watch the video.

As they say, there would be a desire. It remains to say that in any creative process there is no limit to perfection. Make a spinner out of wood, metal, cardboard, concrete ..

As long as ball bearings are in production, we can do whatever we want. Any creative work gives pleasure to those who do it. Do it with pleasure, and then everything will turn out well for you. See you on the blog pages. If anyone has links to interesting options homemade spinner, please leave in the comments.

Article. And now we will tell you how easy it is to make a spinner with your own hands from cardboard or paper.

How to make a do-it-yourself spinner out of paper (cardboard)

Today on sale in markets, shops and shopping centers you can see many fashionable spinning toys - spinners.

They have long become interesting not only for children, but also for adults. The choice is huge: large and small, with or without a pattern, plastic and chrome.

Fortunately, each of us can not only buy a spinner, but also make it with our own hands from available materials: paper, cardboard, plastic lids, plywood. To begin with, I recommend that you read the article on the benefits and dangers of spinners.

This article will show you how to make a cardboard spinner.

Advantages of the method:

A cardboard spinner is easy to manufacture. The process takes about 15-20 minutes. Even a child can cope with such a task.
Most likely, you do not need to go to the store, the materials will immediately be found in the house.
Author's approach and scope for creativity. Cardboard can be easily painted in any color, add patterns, sequins, decorative elements and so on.

Flaws:

The disadvantage of a cardboard spinner is its fragility, and it only spins for a couple of seconds. But you can immediately make several pieces in reserve.

The process of making a cardboard spinner

Step 1.

We select the necessary materials:

sheet of cardboard
cover from plastic bottle,
scissors,
ballpoint pen or fine marker,
glue,
rod from the handle (preferably large diameter e.g. from a gel pen),
3 medium-sized coins,
1 small coin,
gouache,
thick knitting needle or awl.

Step 2.

We make a blank for a spinner. It can be downloaded from the Internet, printed and translated onto cardboard. You can download templates for the spinner.

Or use a plastic bottle cap - circle it 4 times to get the desired shape. Next, we cut out the blank from the cardboard. In the same way, we prepare the second blank (copy).

Step 3.

We circle a small coin on the cardboard to make 4 small circles. We cut them out.

Step 4.

We glue large coins on 3 side circles of the cardboard blank of the spinner. Glue the second blank on top. Then you can paint the product in any color, draw something. Fantasy is not limited.

Step 5.

Using a thick knitting needle or an awl, make a hole in the center of the future spinner with a diameter of about 5 millimeters. We also make holes in two small circles.

Step 6.

Cut off a piece 0.7-1.2 centimeters long from the handle rod and insert it into a small circle, fixing it with glue.

Make sure that no glue gets into the center of the toy, otherwise it will not spin.

Step 7.

Glue the remaining 2 circles on top of the ends of the rod. They can also be colored.

The funny toy is ready!

Video instruction from the YouTube channel Lum Planet

(0)
Why do some countries want to ban the spinner? Adults may not know the name of this fashionable toy. And any child who has already learned to speak will immediately answer: “This is a spinner! […]
(0)
What are spinners? They are a small gadget with a bearing in the center and small blades around the circumference. Fidget spinners are a modern fitness tracker, [...]
(2)
Plasticine furniture for a toy house for children 4-5 years old step by step instructions the kids and I will sculpt furniture from plasticine. In the last lesson, we made a cake and [...]
(1)
A craft from plasticine for a child 3-4 years old. What will we do today? Modeling crafts from plasticine. After all, a plasticine craft is a fascinating activity that even children 3-4 can do [...]

Did you like the article? Share it

Print article