Technical cabinet in the bathroom. Sanitary wardrobe in the toilet: Interesting Solutions and Options
In panel apartment houses, With a ready-made plumbing cabin, divided into a bath and bathroom, riser engineering communications, as well as a water supply to the apartment, is located in the toilet for the toilet. During construction, they are closed, an ugly cabinet with a door, which often change to decorative cabinets. One of the options for such a decorative cabinet closing the riser engineering communications and a water supply to the apartment can be a cabinet made of plasterocraton. If in the last article built a cabinet made of hiking in the bathroom, here how to make a wardrobe in the toilet for a toilet from the hitch.
Terms of work
We have a toilet in panel house, about 800 mm wide. Per installed toiletMade a wardrobe with a door of a chipboard, painted or an attached PVC film.
Task, replace the existing, non-zero wardrobe, on the closet in the toilet for a toilet from the hitch with a hatch-door, to access engineering communications. The hatch door is planned to be awarded ceramic tiles Together with the walls in the toilet.
Measures
To properly buy materials, even before dismantling work it is necessary to carry out the following measurements:
- Toilet width from the wall to the wall, at the installation site of the cabinet;
- Heal toilet height to ceiling;
- The height of the top of the bull toilet bowl, taking into account the height of the first floor.
Picture
On a piece of paper, draw a future closet. In the figure, specify the door-hatch. The bottom of the hatch should not be below the height of the barrel to be able to open it. If the bar is planned with a vertical drain mechanism, with a lever, you need to take into account the height of the drain handle.
Note: Luke door dimensions are standard and you can see them on any seller's website.
Together with the wardrobe pattern, draw the frame scheme. The frame of the plumbing cabinet between the walls of the toilet is not complicated. Vertical racks at the walls and in the installation places of the hatch. Horizontal stands on the ceiling and floor, as well as reinforcing racks at the bottom and on top of the hatch installation. Around the installed hatch, there should be a kind of frame from the profiles for drywall, and the profiles themselves should be strengthened wooden timberFor the opportunity to secure the door-hatch.
Materials
For these works, we will need the following materials:
- Profile guide (PN);
- Bar wooden to strengthen profile at the landing site of the hatch;
- Plasterboard moisture-resistant in the area of \u200b\u200bthe cabinet with a thickness of 12 mm. To enhance the structure, you can use two layers of plasterboard with a thickness of 10 mm;
- Self-tapping screws for higgling, dowel screw, dowel and screws as needed;
- Sealing tape type dichunchsband.
Instruments
For these works, we will need the following tool:
- Electric drill (or perforator);
- Scissors for metal or "Bulgarian" for cutting profile;
- The knife is mounted for cutting of plasterboard;
- Metal line;
- Construction level;
- A set of screwdrivers or screwdriver.
Wardrobe in the toilet for the toilet from the hoggarter do it yourself: stages of work
Stages of work include:
- Remaining toilet;
- Dismantling of the old cabinet;
- Floor alignment in the cabinet area (if required);
- Installation of a frame with strengthening racks by a timber;
- Saving frame plasterboard;
- Installation of door-hatch;
- Sealing of drywall seams, preparation for tile work.
Stages of work execution
Remove the toilet
After turning off the water supply and draining the water from the barrel, the old toilet must be dismantled. He will interfere with work.
Dismantling of an old cabinet
With the help of a fombus, an ax and a nail, the old closet should be disassembled. Walls must be cleaned of all designs.
class \u003d "Eliadunit"\u003e
Floor alignment in the cabinet area
If necessary, the floor in the area of \u200b\u200binstallation of the new cabinet should be aligned. Building garbage must be removed, and the floor to align the levelover, it is semi-dry and will not leak to the neighbors. Save the levelover (semi-humid screed) 3 days.
Marking
The markup of the cabinet is to apply on the walls, the floor and the ceiling of the profile fastening line. Marking lines should be strictly vertical.
Fastening profiles (carcass construction)
The framework of profiles is mounted on all the installation rules of plasterboard structures. To the walls, the floor, the ceiling profiles are attached to dowels and screws or dowel-nails. Profiles are connected by chambers of the clusters or the rod. Strengthening bar is inserted into profiles and is fixed with wood screws. If the hatch is large and heavy, the vertical bars are better made in the stretch from the ceiling to the floor.
Important! The dichunshband sealing tape is defined between profiles and structures. The tape is glued to the outer shelf of the profile.
Set of hatch
Conclusion or conclusions
The cabinet in the toilet for the toilet from the hitch is facing tiles together with the walls.
The question of comfort and comfort in housing depends directly from the aesthetic component of the interior, on its attractiveness and rational use of space. The use of such elements as a plumbing cabinet to the toilet allows you to hide from the eye of the tenants and guests of the house details that should not be noticeable. We offer to learn how to choose the right wardrobe in the finished form or do it yourself.
The toilet is a very important part of the dwelling, from the correct arrangement of which the further ease of its exploitation depends. For better ergonomics, the so-called plumbing cabinet is used here, often protruding in the form of a hatch in the wall. Consider the main objectives of its use:
- hide communications - the main task this product. Hide all pipes by setting them into a specially designated furniture element, very comfortable and practical. Nude communications rarely fit into existing designs, so it is easier to hide them. To most apartments, they pass in a special niche, which is easy to make the repository;
- additional storage facilities household chemicals And other cleaning accessories will not be superfluous. The separation of space on pipe zones and shelves will help save a lot of space, so necessary in conditions of close bathrooms or individual toilets;
- access to the meters should always be free, so the placement of them in an accessible place hidden by furniture doors will easily check the cost of water in the house;
- cleaning pipelines that may arise during the existence of the house are easier to eliminate in an easily accessible places, rather than in the niches closed with tiles or clapboard. The cabinet simultaneously hides the pipes from the residents of the house and allows the plumber to get to the pipes, the leakage is happening.
Varieties
A variety of plumbing lockers allows them to apply them to any premises, and the range of their facades will help choose the door to the design of the door. Distinguish this element of furniture on various criteria.
By type of doors
Plumbing cabinets may vary by type of doors. They can be uncharged:
- louvrugous doors - can be two types: rolling and so-called pseudo blinds. Rolling doors are very convenient because they do not occupy space in the open position, they are easier to use them in hard-to-reach places where ordinary doors simply do not open. Pseudo blinds - a plain door made in the form of blinds, but without moving parts, which is very convenient in terms of ventilation of space with pipes;
- sanitary hatch, closing a niche, can be absolutely any size thanks to the existing assortment in many manufacturers. This is the usual frame from the corner to which the hinges are attached steel door With a lock. Such a hatch looks simple and simple, which can not always be combined with the design of the bathroom. Cheap and common product is also not distinguished by special strength;
- doors swing - this is an individual product, often created under the order. Collecting a wardrobe with swing doors, it is worth considering the space in front of them for the full opening of them. Taking into account the materials used - it may be expensive pleasure.
Swing
Revision
Roller shutters
Folding
By material manufacturing
Also, structures are divided into a series of species, depending on the materials of the manufacture:
- metal doors are used in the manufacture of hatchs during niche equipment. Also, metal is used to develop frameworks and fittings. Do not forget that we are talking about a toilet and a bathroom, where condensate can be collected on the iron pipes, increasing air humidity. Thus, it is better to use parts from aluminum or other stainless metal;
- a tree is often used to create the facade and the base of the cabinet. Swing wooden doors can close the built-in floor cabinet to the ceiling, or separate the communications with a small neat door;
- plastic usually made parts of rolls or small hatches. It is lightweight and inexpensive material;
- in addition to the tree, you can apply a tile attached to a special framework for hintage. Such a solution is very useful for preserving the design concept of the room, when nevili hatches are used;
- mirror surfaces can visually increase the space, and will also perform their direct purpose.
Dimensions
The question of choosing the size of the cabinet is very individual, however, you should know several rules that will help to avoid the unpleasant consequences of the improper installation of the structure:
- the cabinet from the ceiling to the floor is set in case the communications in the toilet took the vertical wall. Such a large cabinet gives access to any part of the pipes at any time, which is very convenient during repair work. Inside the large cabinet it is easy to install the shelves and store household accessories and chemicals. Using niche, it is worth being ready for the formation of the protrusion with dimensions of approximately 40x70cm;
- the small hatch is designed to provide access to the meter, but it is extremely difficult to repair it through it, so the owners, insecure in the piping state, it is worth choosing another size of the cabinet;
- the average size of the cabinet, for example, 50x70cm will provide access to the meter and allows you to install in a few shelves. Usually this size is made of wood cabinets or with a facade of tiles.
- the dimensions of the secret door are determined by the sizes of the tile or other material that the room is facing. 2-4 tiles are usually used, which forms the door with a size of approximately 35-35 or 35-70cm;
- the depth of the cabinet should be such that inside you can work the key or easily reach the desired valve.
It is worth considering that the installation of the cabinet is an almost inevitable process, so before the replacement of pipelines it is worth thinking about the size of the design and how well it will fit into the interior of the bathroom or toilet.
Required fittings
For a long and high-quality sanitary cabinet service, special attention should be paid to the accessories used in this product. Consider what accessories are used for the manufacture and install such cabinets, as well as details:
- the loop is an important component of the doors, holding the entire weight of the product that is responsible for the correct closing and the absence of gaps between the door and the frame. The loops should be made of stainless alloys, so they will serve longer;
- closers, in case of installation of a folding door on a closet, play a very important role. This mechanism is responsible for keeping the door in open state and its smooth closure;
- when using rolls, choose such that the box is hidden inside the cabinet. Such a rolls will fit better in the interior, while maintaining the conciseness of his design;
- when installing a secret hatch, lined with tiles, or other material, similar to the main in the bathroom, is acquired only a mechanism that ensures the operation of the door system. The buyer himself must choose than to decorate the adaptation. It is worth remembering that the installation of a secret hatch is carried out before the start of the walls;
- castles and latches should work smoothly to provide permanent and unhindered access to communications. For a secret door, locks that open after the user clicks to the door itself. This design allows you to deprive the door of any exterior handles and locks;
- for tight fit of doors to a frame, you can apply furniture magnets.
How to make it yourself
Almost any repair does not do without the help of specialists or other hired workers, however, the moments are coming when the owner of the house decides to do something with his own hands. Make a Santechshkaf personally perfectly perhaps not even the most experienced repairmen. Here are some useful tips:
- depending on the features of the room layout, the installation of a built-in or attached plumbing cabinet will be required. In the first case there will be less consumption of materials and, possibly, the scope of work;
- deciding with the choice of design, it is worth building a framework. Metal carcass Durable wooden and stronger. By installing the frame for a toilet tank, it is worth remembering that it will interfere with the opening doors. Frame in a niche - a simple rectangle, to which the door is attached;
- if the internal space allows you to organize a repository in such a locker, then you need to install the shelves to attached in advance horizontal metal corners. When installing shelves it is very important that they do not touch the pipeline;
- the last stage of the assembly is the installation of the selected facade.
It is important to remember about the processing of all parts impregnated against moisture hitting and such a locker will last for a very long time.
Video
Photo
The rational use of the bathroom space largely determines the level of its comfort, and the aesthetic component is important for giving the premises of comfort, attractiveness. Such a plumbing element like a locker to the toilet helps to achieve these goals. If there is a similar product, use the toilet will be most convenient as possible.
The bathroom is one of the most important premises At home, and errors in its arrangement may affect the comfort of life. To increase the ergonomic characteristics of this space, it is worth selecting functional, beautiful, durable cabinets in the toilet.
Furniture of this plan has a huge number of advantages and allows you to solve many important issues in the arrangement of the bathroom:
- driving communication (sewer and water pipes), You can give the room an attractive, neat look. Nude pipes, hardly, call beautiful, and their design rarely fit into the apartment. Therefore, you should not leave them without attention. Correctly picking a locker, it will be possible to get to communications at any desired moment, which is extremely important when breakdown;
- featuring a spacious model, you can provide yourself with an additional place to store household chemicals, cleaning items. If you split the space inside the product on the pipe zone and for the shelves, you can save a decent bathroom space. This is especially important when the room has small sizes, such as in Khrushchev;
- if there is a meter on water, it can also be hidden into the locker to the toilet. Thus, you will ensure trouble-free access to the equipment, but hide it behind the facade of furniture for greater aesthetic interior.
Advantages in such furniture mass, it is for this reason that it is so popular today among owners country houses and apartments. But most of them are revealed if a quality product is purchased.
Product options
Modern toilet cabinets are very diverse in operational parameters and appearance, so the consumer can easily choose a model in any style, depending on the decor of the bathroom of a particular size, colors.
We describe the most popular types of lockers for the toilet. By type of door distinguish plumbing products with:
- the louvre doors of two types: rolling and "pseudo-gas". The first option is convenient for a small bathroom due to its compactness. The door does not break off, for which the additional space needs, and it consists, rising up. Therefore, the louvral models can be hung in uncomfortable places. The second option is a conventional facade made in the form of blinds, but without the presence of moving slats. Such a door allows the internal contents of the furniture to be perfectly ventilated;
- plumbing hatch, which closes a niche with pipes. In practice, the hatch is a conventional frame from the corner to which the door from the metal with the lock is assembled with the help of loops. Note that such a decision will not cost expensive, but it looks like a hatch is not always stylish, expensive;
- swing facades - such structures are better to make to order. They are diverse in design, dimensions, functional and practical;
- coupe doors - this design does not require an additional place to open the door, as it simply moves for the second facade.
Blind
Swing
With plumbing hatch
Based on the manufacturing material, highlight models from:
- natural wood - dear, beautiful, durable material. But it is worth remembering that when combining the bathroom and toilet, the life of a wooden locker can be reduced. Elevated level Air humidity negatively affects the quality of surfaces
- MDF - the cost of structures from MDF refers to the category of medium, but under the influence of water, the material it can lose its form;
- The chipboard is the most unwanted option for a combined toilet with the bathroom, since the chipboard quickly absorbs moisture from the air and swells. But for a separate toilet, the chipboard is the ideal option at cost and external aesthetics;
- plastic is the most practical optionSince plastic is completely not afraid of high humidity. But appearance Plastic models are not always aesthetic. This is rather a budget option.
Wood
Plastic
Glass
Based on the shape of the product, cabinets are distinguished:
- rectangular - standard products that are selected for the bathroom more often than the rest;
- corner triangles - perfectly fit into the angle space, which allows it to be rationally planned;
- corners in the form of a trapezium are more specificated than a triangular model;
- radius - possess an unusual design, but it is quite expensive.
Methods of accommodation
If a sewage pipe It takes place in niche, it is worth picking up a standard rectangular or square cabinet in the toilet for a toilet. This is an ideal solution that allows you to give the Communications an attraction. The main thing to guess with the size of the model so that it successfully fit into a niche. If I want to save, you can not get the finished closet, and choose a hatch with a lock, with which it is closed with a niche with pipes.
If the pipes are concentrated in the corner of the room, then you should stop your choice on corner model Cabinet. Such designs are characterized by high capacity, and their design will allow the toilet a pleasant look.
Additional functions
In small bathrooms, it is imperative to endure all furniture items with high functionality, practicality, to use the room as convenient as possible at any time of the day. It should not forget that the design of a small space also affects its comfort. Therefore, the models of cabinets in the toilet must have additional features. Such a product is represented in the photo in the selection.
With a mirror
With backlit
How to choose correctly
If the design of the bathroom is selected, it will stay to pick up for it suitable model Cabinet. When choosing a mini-size toilet cabinet, it is important to remember the following:
- initially, it is necessary to determine the choice of the product shape. If there is a niche, choose built-in models to order, if not - you can choose more costs, ready-made models;
- next, perform measurements of space to understand the wardrobe of which scale successfully will fit into the bathroom. Measure the parameters of the pipes that hide in the cabinet. Be sure to sketch the schematically features of their location before leaving the furniture store;
- select the current color solution and design of the plumbing element, which will perfectly complement the bathroom decor;
- ask the seller a quality certificate to the product, which will be a guarantee of a long service life of furniture, its practicality, high quality applied materials in the process of its manufacture. It is also important to clarify the presence of fasteners and other components. If, in addition to the model, the bracket or hardware is not underway, you will have to purchase similar fasteners separately. They will enjoy the installation of the design on the wall surface.
Remember, the cabinets in the toilet photo of which are presented below should be harmonized with the decoration of the room, supplement it with its beauty. Then the room will look more concise, holistically.
Video
Photo
Belarusian interroom doors, as a set of aggregate european standards and acceptable prices. The most popular manufacturers of high-quality products will be presented.
Interroom Blocks from Belarusian manufacturers: European design at affordable prices
Belarusian furniture and door products always remained at an altitude due to the special distinctive qualities and availability of the price range in the retail suggestion of consumer demand in the construction market. It is worth only to point out interroom door designs and say that the doors from Belarus, the questions immediately disappear. This unshakable figure will be comparable, for example, with spirits from France either with silks from India, the quality is out of comparison.
So regally it happened that Belarus is rich in the most sought-after building materials For the production purposes of door blocks:
Wood in this country grows everywhere, unfortunately, Belarus is mowed with thick groves and forests. Historically, the doors from Belarus have always been the best, because the earth gave and talented Masters of a carpentry. Thus, the availability of wood raw materials and multiplicity of craftsmen is reflected in the low cost of products in the consumer market.
Interior doors Belarus is in the countries of the former Soviet Union directly from the manufacturer. The catalog with the range of quality doors will help easily and quickly choose any product relative to the required standard sizes, in diverse color gamma, wide range of designer design and design solutions. Between the dependence of the stylistic interior design in the room, it is not difficult to choose a perfectly suitable Belarusian product regarding functionality and design. The presented catalog of interroom overlaps will allow you to familiarize yourself with all the functional characteristics and technical properties of products performed in European design, but at an affordable cost.
The most famous, in demand and high-quality Belarusian fabrics on trading construction sites in the CIS countries are presented from the following manufacturers:
| № | Manufacturer of the door interroom blocks | City location of production capacity | The average value of the product of wood array |
| 1 | TM "Door of Belarus" | minsk | $78 |
| 2 | Company "ISTOK" ("Istok Dors") | minsk | $58 |
| 3 | Company "Halez" | smorgon | $60 |
| 4 | TM "BELWOODORS" | minsk | $52 |
| 5 | TM "GREEN PLANT" | minsk | $68 |
| 6 | ODO "Vist" | minsk | $80 |
| 7 | Chamber of Commerce and Industry Company "Plant" | minsk | $76 |
Belarusian doors: preferential features in technological manufacture
In production scale in the manufacture of Belarusian doors, exceptionally environmentally friendly materials and modern technologies. So the final result of the fabric is nothing more inferior to the aesthetic signs and the qualitative characteristics of the product of European manufacturers. It is especially worth noting the technology of produced by veneered interroom structures.
Technologically veneering of Belarusian blocks is made by two types:
Veneer, as a thin section of valuable breeds of natural wood is known to many. Raw material has all the characteristics peculiar natural material, combining the magnificence of the wood structure and its beauty, environmental friendliness, as well as sound and thermal insulation properties.
Technologically, veneering is performed by pressing a natural veneer on the base of the chipboard or MDF.
Technology outdoor decoration The door cloths are enclosed in use somewhat in a different kind of material. The frame is made of furniture shields, where kalenic glass and Belarusian MDF canvas are used as inserts. The material of the ECOCHPON itself is heavy-duty raw materials, the stability of which is comparable to mechanical damage to solid plastic. In this case, the surface of the texture is no distinct from natural wood, completely imitating the texture of the tree. So the ecoschpon is pleasant enough and is realized to the touch.
The veneered designs of the interior destination of Belarusian production are unique due to the peculiarities of technological production. This is how the aesthetic naturalness of the product is preserved in the ergonomic use of raw materials with pleasant quality, which is reflected in the retail cost of products presented on trade construction sites. To the advantageous advantages of the door articles created by the frame of the frame with a frame made of MDF or a chipboard, as well as the technology of bladed with routines with raw materials of valuable rocks made from wood array, the following indicators can be attributed:
Wenge doors in the interior
Belarusian productions are developing at a time in various directions: design, technology, assortment. Approaches to marketing are constantly improving. In addition to high quality indicators and low prices, Belarusian manufacturers to the consumer offer an individual approach and attentive attitude of specialists.
Finding any of the options and design the door, it is permissible to adjust the decoration of the canvas, the color, glazing, which in the end makes the factory exclusive. This attentive attitude of production specialists makes products most requested. It is worth paying attention to the leading Belarusian companies that produce sought-after products:
Many large companies Belarus is used in production the latest technology Treatment of materials, with the help of this design of fabrics, the national teams are obtained. This kind of approach to processing processing in the forces of Belarusian manufacturers to ensure the quality of products with a long period of efficient operation.
Elegance of Belarusian products in pastel colors
Currently, white interior overlap of Belarusian production is being the greatest popularity. the lineup, made in pastel tones of light shades. The attractiveness of interior door canvases created in pastel colors is provided by decorative golden elements in the form of linings on the canvas, glazing, panel and other decors of the artistic trim. The decoration of the door cloths of pastel tones prevents the sophistication of the interior of any room and gives some elegance design.
Belarusian typical doors in opening room openings, living rooms, which are furnished in classic style In the tones of the ivory or white colors of the furniture solution. Complete the stylistics of the door leafs in pastel colors and give the harmony of the room, designer solution which comes down to modern style or under ancient. Fully popular interroom light doors, created from a typical array or solid, trimmed with a veneer of natural light wood tones with decorative glazing and other artistic elements. Among the assortment of Belarusian production, such models in pastel colors are presented as:
Door products of Belarusian production possess all the advantages of additional characteristics of such as electrostatic. This quality, inherent in the surface of the products, does not allow dust on the panels, which facilitates the care of fabrics and external presentability.
One of the main problems of the urban apartment is the eternal flaw. Countless detergents, Tools, screws, nails, spare taps to the mixer and other household trifles rapidly fill the cabinets and shelves. Today we will get acquainted with several simple designs Toilet lockers capable of partially solve this problem.
Wishes
Ideally, any homemade locker above the toilet must meet several simple requirements.
- The depth of the structure should be minimal. Places in the toilet and so few; Our goal is to use a niche beyond the tank, and not to deprive itself to residue comfort.
- The design should be moisture resistant. Humidity in the bathroom is always slightly higher than the apartment by the evaporation of moisture in the toilet and the tank.
In addition: toilet, bathroom and kitchen more often than other premises are subjected to flooding during accidents.
It is desirable that another incident forced the owner to make overhaul.
- Finally, the cabinet above the toilet should not block access to the stands located in the niche. There is often the valve, overlapping water to the apartment, and coarse filters. In houses where hot water It is not distributed centrally or filed with interruptions, the boiler or flow water heater is often located in the same niche.
Materials and solutions
What can be with minimal cost time, forces and means building a locker in the toilet for the toilet with their own hands?
We offer some simple solutions.
Plasterboard
From moisture-resistant drywall, you can make a very aesthetic open shelves.
The frame is collected from a galvanized profile; The order of further work is quite traditional for designs from GLK:
- Sliced \u200b\u200bGypsum Carton Details are muted to frame with self-draws with a 25 mm long. For cutting of plasterboard, you can use an electrolovka, and you can simply break down the sheet, cutting it through it with a sharp knife for a third of the thickness.
- The seams and hats of self-tapping screws are sweeping with a gypsum putty (ABC, fogenfuller) by twice with intermediate drying.
- The seams are then rudely rubbed with a grinding grid and wash away from dust, after which the entire surface of the GLC is ground with penetrating soil.
- The next stage is reinforcing seams. By the humble opinion of the author, it is better not to use a sickle for this purpose, but a rolled glass cooler: with sufficient strength, it will make the seam less noticeable and will allow you to do without additional spending of putty on alignment. Glass coolers glued on a slightly diluted PVA water.
- After drying the reinforcement of the seams, repeatedly swell as thin, "on the couch", layer of plaster, grinding the mesh, wash and ground.
What can be separated by plasterboard shelves in the toilet for the toilet?
| Element design | Fashion finish |
| Top horizontal surfaces | Tile. It is cut to the size of a diamond disk and sits on ordinary tile glue; Seams are wiping any color grout |
| Vertical and lower horizontal surfaces | Waterproofing (rubber) water disposal. It is applied with three layers with a brush or roller. Spots on the tile is better to drop immediately: rubber dye is very rack; The author successfully used it for painting steps on a street ladder |
| Corners | They are better to kill PVC corner on silicone sealant. Located under putty galvanized or plastic angular profiles quickly lose the neat appearance |
Plywood
A very durable and durable cabinet for a toilet in the toilet can be made of plywood.
The specific design of the reader will tell his creative talent; The author will focus on the technical problems of construction.
- It is better to use FC FC with a thickness of 15 millimeters. More moisture-proof FSF is not suitable for residential premises due to the composition of the adhesive substance: it contains phenol formaldehydes.
- Shelves up to half-meter in the rigid rigids do not need and can be mounted on the galvanized corners bolted to the walls. Long shelves are better to enhance vertical ribs discharged from the same plywood. Rib width - about 50 mm; It can be used in the near or far edge of the shelf.
- For cutting plywood it is better to use a disk saw. The cuts made by the jigsaw will always be less smooth. Whether the saw along the cut should be slowly: so there will be much less scaling.
- Subsecured parts are placed on a sheet in such a way that their longer facets on the front side were parallel with the veneer fibers in the surface layer. The reason is again in the edges of the cut: when cutting along the fibers there will be no untidy scaling and raised chips.
- Fat plywood can be connected with 25x4 mm scinting screws. The part that is attached to the plastics is pre-selected with a 4-mm drill; The end of the second part is drilled with a diameter of 3 mm to a depth of 30 millimeters. Do not forget to break the hole to hide the screw of the self-press.
- As a protective decorative coating, a parquet varnish can be used on an alkyd-urethane basis. It is applied with three - five subtle layers with an intermediate drying. Before applying the first layer and after its drying, the details are definitely polished: Plywood FC initially has a far from the perfect surface; The lacquering will raise a pile on it, which will make Faneru Sherchava.
Wood
Wood is favorably different from plywood because it does not preserve with long-term exposure of significant load. In addition, wood (especially noble breeds) looks better as a layer of transparent varnish; However, the price of this material is incomparable with expenses on one or two sheet plywood.
For the connection of parts from a solid array, not self-tapping screws or nails are used, but imposed on the glue. For the manufacture of brazers, solid wood rocks are used (birch is quite suitable for inexpensive); Adhesives are better to use natural: casein or albumin.
Wooden locker. The wall is typed from the lining, the door - from a thin rail.
Ledp.
Laminated on both sides, the chipboard attracts only the simplicity of finishing the finished structure: in essence, the manufacturer remains to be caught the ends of the parts with the edge ribbon. With moisture resistance, she is all sad; About any resistance to deformation, it also does not go - for shelves with a length of over 30 centimeters of stiffness ribs are required.
The only thing for which LDSP can be used without any problems is the manufacture of the door of the locker. Doors in the toilet for the toilet will not be subjected to serious mechanical effects, and the vertical orientation will not allow the material to deform under its own severity.
