DIY touchscreen LED table. Dressing tables with mirror and lighting

Conventional dressing tables usually need to be installed in a well-lit area. Models with external and built-in lighting from the Heggi catalog remove this limitation. Now the furniture can be placed even in the corner, and at the same time, uniform, comfortable lighting for cosmetic procedures will be quite enough.

A range of dressing tables with mirror and lighting

The collection includes several modifications of furniture:

traditional dressing tables with lighting and a mirror (one or three canvases). Equipped with open and closed shelves, drawers, pouf. Materials: solid wood, veneered MDF, metal;
chests of drawers with several drawers at the bottom. Convenient if the room requires extra space for storing things. The mirror and niche for cosmetic accessories are installed under the hinged cover;
designs that combine the functions of a dressing table and a writing table. The mirror and cosmetic compartments are hidden under the mobile worktop. When folded, the furniture turns into a comfortable workplace.

Each model belongs to one of the furniture series for the bedroom and living room. You can buy a dressing table with lighting separately or complete with a wardrobe, chest of drawers, bed, side tables. Goods are delivered throughout Russia (check the terms and cost with the managers). In Moscow, there is a possibility of self-pickup from the store's warehouse.

Reading time ≈ 6 minutes

You can make the interior unique and distinctive with the help of unusual pieces of furniture, for example, a table with an infinity effect. It will not be difficult to make such a little thing yourself if you use a simple instruction. The finished product will organically complement any modern interior and will cause genuine delight among households and guests!

LED backlit table.

Feature of the table

Externally, the table is not much different from any ordinary coffee table. However, it is worth turning on the backlight, as the tabletop of the product begins to flicker and glow with hundreds of lights, creating the illusion of infinity. You want to admire such magic all the time, and there will be no one indifferent to the unusual table either among adults or among children.

Coffee table with backlight looks especially impressive when the lights are off in the evening.

The infinity effect is achieved thanks to the special design of the tabletop - its box consists of two mirrors, and a diode strip is installed on the sides. In this case, a semitransparent mirror is selected for the top cover so that the light pattern is more noticeable and pronounced.

In more detail, the design of the product is shown in the photo below:

Design.

You can turn on the product using a remote control or a special switch on the box.

To illuminate the countertop, you can choose diodes of any desired shade or combine several colors. But experts especially recommend taking a closer look at the red diodes - due to a small dispersion, the endless tunnel acquires more depth.

Such an unusual piece of furniture is perfect both for home use and for placement in the office. It can be made of absolutely any size and from any material.

Lilac backlit table.

Materials and tools

You can make an exclusive piece of furniture with your own hands. To do this, prepare necessary materials, tools and follow the step-by-step instructions.

To make a table you will need:

frame boards (made of wood or chipboard);
mirror according to the parameters of the table top;
translucent mirror. Dimensions should be 10 cm larger than the lower mirror;
self-adhesive diode tape, length depending on the size of the table, but not less than 1.5 m;
materials for connecting the tape: controller, programmer, wires, power supply with USB;
consumables: sandpaper, glue, screws, metal corners.

Instead of a translucent mirror for the top cover, you can take ordinary glass and cover it yourself with a tint film.

Idea: in order to reduce work, in any furniture store you can buy the simplest table in design and use it as a ready-made base.

Why choose LEDs:

They give a rich, beautiful, deep shade.
Longer service life without burnout (while the number of on / off operations does not affect the service life).
Lack of heating.
High efficiency.
Various colors.
Acceptable cost.
Bulb safety.

Assembly

Before assembling, it is necessary to develop a drawing of the table, calculate the distance between the mirrors, the number of diodes, and think over the location of the electrical elements.

To get an idea of what the flickering lights will look like in the finished product, just place any light source between the top and bottom of the table and see the result.

Regarding the distance between the mirrors, everything is individual and depends on your wishes. But the average value is often chosen - 8 cm. To calculate the depth of infinity, the distance between the covers must be multiplied by 16. Also keep in mind that the depth of the tunnel will depend on the light transmittance of the top cover. After all the calculations, you can proceed directly to the assembly.

Step-by-step instructions for making a table with an infinity effect with your own hands - making a base:

From bars with a cross section of 5 * 5 cm and metal corners, you need to make the frame of the future table. Use screws and a screwdriver for fastening.
Using sandpaper, carefully sand all the edges and corners to give them smoothness and remove burrs.
Drill holes for electrical elements, refer to the drawing. Places of holes need to be sandpaper tighter.
For additional fastening of the structure, you can process the joints with glue. After this, the frame must dry for at least 24 hours.

Assembling the frame.

Assembling the tabletop step by step:

Attach boards (section 5 * 1 cm) along the outer perimeter to a sheet of plywood of the required size, and at a distance of 5-6 cm along the inner perimeter. You should get a kind of gutter between the boards - this is where the wiring and electrical elements will be placed (see photo above).
At the bottom of the countertop, place the mirror with the reflective side facing up.
TO inside smaller frame, you need to attach the LED strip using double-sided tape.
The wiring is placed in the space between the frames.
Attach the top mirror cover to the table top.
The whole structure is fastened with screws.

Assembling the table top.

At the end of all the work, you should have something like this table with a mirrored surface:

The finished product with the backlight off.

However, it should be understood that you can make a table with an infinity effect from any material that you know how to handle - for example, from plexiglass, plastic, metal.

When working with mirrors and glass protective film remove only at the end of all processes.
Be sure to thoroughly study the diode connection diagram in order to avoid a short circuit, or even worse, a fire.
Use moisture resistant adhesive for fixing.
In the event of a breakdown of electronic parts, it will be convenient to have free access to them, therefore it is better to place the controller and programmer not inside the table, but outside - placing it in a neat box and fixing it under the tabletop.

Reading time ≈ 6 minutes

LED backlit table.

Feature of the table

A backlit coffee table looks especially impressive when the lights are off in the evening.

In more detail, the design of the product is shown in the photo below:

Design.

You can turn on the product using a remote control or a special switch on the box.

Such an unusual piece of furniture is perfect both for home use and for placement in the office. It can be made of absolutely any size and from any material.

Lilac backlit table.

Materials and tools

You can make an exclusive piece of furniture with your own hands. To do this, prepare the necessary materials, tools and follow the step-by-step instructions.

To make a table you will need:

frame boards (made of wood or chipboard);
mirror according to the parameters of the table top;
translucent mirror. Dimensions should be 10 cm larger than the lower mirror;
self-adhesive diode tape, length depending on the size of the table, but not less than 1.5 m;
materials for connecting the tape: controller, programmer, wires, power supply with USB;
consumables: sandpaper, glue, screws, metal corners.

Instead of a translucent mirror for the top cover, you can take ordinary glass and cover it yourself with a tint film.

Idea: in order to reduce work, in any furniture store you can buy the simplest table in design and use it as a ready-made base.

Why choose LEDs:

They give a rich, beautiful, deep shade.
Longer service life without burnout (while the number of on / off operations does not affect the service life).
Lack of heating.
High efficiency.
Various colors.
Acceptable cost.
Bulb safety.

Assembly

Before assembling, it is necessary to develop a drawing of the table, calculate the distance between the mirrors, the number of diodes, and think over the location of the electrical elements.

To get an idea of what the flickering lights will look like in the finished product, just place any light source between the top and bottom of the table and see the result.

Step-by-step instructions for making a table with an infinity effect with your own hands - making a base:

From bars with a cross section of 5 * 5 cm and metal corners, you need to make the frame of the future table. Use screws and a screwdriver for fastening.
Using sandpaper, carefully sand all the edges and corners to give them smoothness and remove burrs.
Drill holes for electrical elements, refer to the drawing. Places of holes need to be sandpaper tighter.
For additional fastening of the structure, you can process the joints with glue. After this, the frame must dry for at least 24 hours.

Assembling the frame.

Assembling the tabletop step by step:

Attach boards (section 5 * 1 cm) along the outer perimeter to a sheet of plywood of the required size, and at a distance of 5-6 cm along the inner perimeter. You should get a kind of gutter between the boards - this is where the wiring and electrical elements will be placed (see photo above).
At the bottom of the countertop, place the mirror with the reflective side facing up.
You need to attach the LED strip to the inside of the smaller frame using double-sided tape.
The wiring is placed in the space between the frames.
Attach the top mirror cover to the table top.
The whole structure is fastened with screws.

Assembling the table top.

At the end of all the work, you should have something like this table with a mirrored surface:

The finished product with the backlight off.

However, it should be understood that you can make a table with an infinity effect from any material that you know how to handle - for example, from plexiglass, plastic, metal.

When working with mirrors and glass, remove the protective film only at the end of all processes.
Be sure to thoroughly study the diode connection diagram in order to avoid a short circuit, or even worse, a fire.
Use moisture resistant adhesive for fixing.
In the event of a breakdown of electronic parts, it will be convenient to have free access to them, therefore it is better to place the controller and programmer not inside the table, but outside - placing it in a neat box and fixing it under the tabletop.

There are many creative ideas used by furniture craftsmen in the manufacture of masterpieces with their own hands. A bright, original and memorable product that will perfectly decorate a modern interior and create a unique atmosphere is Coffee table ik with infinity effect. It is not very easy to make it, but it is quite possible if you have some skills in working with wood and glass.

You can place a backlit table both in the office or in the country, and at home. LED lamps used in the assembly of such furniture are absolutely safe for human health, as well as for environment... Such lamps are durable and economical, so the operation of the table with the infinity effect will not lead to increased energy consumption.

The illusion of an endless tunnel is created by the use of two mirrored surfaces and LEDs located between them. The colors of the lamps used can be any, however, experts say that red diodes allow you to make the tunnel deeper, since red is less prone to scattering than other colors.

To control the backlight, an on-off button or a special remote control can be used.

Preparing to start work

To make a coffee table with a mirror, you need to prepare necessary tools and materials. The master will need:

boards - wood or chipboard;
sandpaper - it is needed to process the boards after cutting them (if the material is purchased cut into suitable elements, then there is no need to use sandpaper);
ordinary mirror - for a coffee table with a diameter of about 60-70 cm;
translucent mirror - its width should be about 10 cm wider than the width of a regular mirror (an additional size is needed so that the glass can be glued to the LED strips); in the absence of a translucent mirror, you can use glass on which a mirror film is glued;
power supply unit with USB output;
self-adhesive LED strip at least 1.5–2 m long;
wires;
USB for microcontroller power supply;
microcontroller and programmer for it;
self-tapping screws;
Super glue;
screwdriver.

Some craftsmen prefer to make a table with their own hands using a New Year's garland instead of an LED strip. In this case, there is no need to purchase equipment, which is equipped with structures with LED strips (microcontroller, USB).

Tabletop assembly order

First, a frame (sidewalls) of the future design is assembled from 4 boards using self-tapping screws, then this frame is glued on top of the mirror, on its front side. In this case, the size of the frame must correspond to the dimensions of the mirror.

At the next stage, a frame with LEDs is assembled with our own hands. The outer diameter of the frame can be equal to or greater than the outer diameter of the frame, but the inner diameter should be 1-2 cm less than the inner diameter of the frame on each side. When the frame is ready, an LED strip is attached from the bottom of the frame along the inner edge. Then the frame is attached to the sidewalls with screws. Holes are drilled in the frame through which the wires are brought out.

When all these works are completed, it remains to attach a translucent mirror to the frame. It is screwed in with special screws. It is advisable to choose screws that can be removed without much difficulty (in case you need to replace the LEDs). Craftsmen recommend attaching small strips to the edges of the frame, which in height form a single plane with the glass. At the final stage of the work, it will be possible to attach an upper frame to these slats, which ensures reliable fixation of the tabletop.

Not every master can equip a table with such a mirror, because this material is quite rare. Many furniture makers use plexiglass and a self-adhesive mirror film that is applied to the underside of the glass (the one that faces the mirror).

Mirror-coated glass is also popular, but you need to choose the right one. To determine whether mirror-coated glass is suitable for making a coffee table with an infinity effect, you can as follows: put a mirror cut and a glass cut in parallel, and place any light source between them and visually evaluate the effect.

Another affordable option, which is often preferred by novice craftsmen, is the use of ordinary window glass. But in this case, it will not be possible to achieve sufficient depth of the endless tunnel. In addition, the observer will be able to see everything inside the table.

One of the most important characteristics that you need to pay attention to when assembling a table from mirrors is the depth of the tunnel. It is determined by two factors:

the distance between the mirrors (the real distance should be multiplied by 16 to get the approximate apparent depth of the tunnel; in most cases, the real distance from the lower mirror to the upper one is 75-80 mm);
throughput translucent material.

To ensure long-term operation of the backlight and save energy, it is recommended to use a power supply with 50% power reserve.

There is an easier way to DIY a table with an infinity effect. In this case, instead of the LED strip, a regular New Year's garland is used. First, a square or rectangular frame is made from the bars, then the number of bulbs on the garland is counted.

After that, marks are applied to the frame in those places where the bulbs will be located. It is recommended to place them at a distance of about 2 cm from each other. At the next stage of work, holes for light bulbs are drilled in the frame of the future table.

Then bulbs are inserted into these holes and fixed there. Then you need to glue the frame on the mirror with your own hands, and glue the glass with a mirror film on top of the frame.

When the illuminated tabletop is ready, it remains to make the base and table legs. The legs should be thick enough (about 10 cm in diameter) so that a hole can be drilled inside one of them for the wires. Leading the wires through the leg is a solution that allows you to make the product as aesthetically pleasing as possible. It is possible to lead wires directly from the tabletop, but this will make the table less beautiful and less convenient to use.

When the legs are made, in one of them you need to form a through hole with a diameter of about 5 cm.In the upper part of the leg, you should make two grooves along which the wires will pass, and also cut out the corner hole necessary to fix the tabletop.

The height of the hole must be the same as the height of the worktop. The depth of the hole must be calculated individually in each case, it must ensure reliable fixation of the tabletop. Corner holes are made on all four legs.

In addition to the legs, you need to prepare a base in which the tabletop will be placed. The width of the base should be such that the base protrudes 8-10 cm on each side of the countertop placed inside it. Free space around the countertop is needed to accommodate wires and related equipment.

A hole is formed in each corner of the tabletop into which a leg is inserted. Then, an external frame is attached to the base using self-tapping screws, the height of which is equal to the height of the table top. Then the legs are screwed on, and the table top is placed in the finished structure. In the spaces between the table top and the outer frame, wires are placed, which are led out through the table leg.

When the assembly of the base and countertop is finished, all that remains is to close the space with the wires and additionally fix the countertop inside the base. For this, a special frame is made.

The width of each side of the frame is calculated as follows: width of the groove with wires + thickness of the outer frame + a few centimeters to secure the tabletop with the frame. This frame is assembled from four blanks and fastened with self-tapping screws. It is then bolted to the outer frame and to the tabletop frame with LEDs.

The holes for the bolts must be drilled in advance to avoid delamination of the wood. The design is ready!

Desire to create an excellent interior and saturate your life bright colors is inherent not only to young entrepreneurs, but also to ordinary people who want to make their lives happier. But you can even make such an interesting piece of furniture with your own hands as a table with iridescent lights.

Kinds

Illuminated tables can be different kind and destination.

Dressing tables with lighting around the mirror. Light bulbs are located around the mirror frame. Lamps should only be white... Multi-colored lamps are not allowed.
Illuminated, but no mirror. Backlighting is a design element and has no technical role to play. As a rule, it is presented in the form of an LED strip. V different options the tape can be located in different places. Gives a contrasting, perhaps even "futuristic" shade, suitable for a variety of interiors.

Structurally, tables are:

A table with no internal storage space. Not highly recommended, but this option may be considered if not needed. There are, of course, tables in the form of a triangle, circle and other shapes.
Table with a curbstone. This modification allows you to store both cosmetics and many different grooming tools. The number of pedestals does not vary much: one or two. Has a suspended compartment and a stand with drawers. The pull-out drawer is definitely handy when dealing with makeup or hair. From the experience of people, it is believed that it is very convenient for storing cosmetics, body care products and other similar products.

A table with drawers. Almost the most popular table model. Looks good, takes up little space. Subspecies: suspended, attached and corner tables... Do not forget that there is a very original solutions, which are not available in all stores.

How to choose?

Price, like quality, is one of the most key issues, therefore, before making a purchase, you need to carefully familiarize yourself with the market, study brands. Shopping can only be done in trusted locations. You need to avoid dubious market points, dubious resources on the Internet. Particular attention should be paid to compliance with GOST. Many dishonest manufacturers or craftsmen can use recycled or even hazardous material. Sometimes it is better to pay a third more, but at the same time win several times in quality. The adage “a cheapskate pays twice” does not lose its relevance here.

The material from which the table is made must also match the decor.

Be careful with too heavy, but at the same time small furniture if there are children or animals at home.

Where can I get it?

Despite the external originality of such a furniture product, it is quite easy to acquire such a miracle.

The simplest, and probably the most obvious, option is a furniture store.

Often these neon tables are part of the kit and create the overall design for the room, but you can also find copies that live on their own. It is important that such a table is not only convenient to use and corresponds to the dimensions, but also becomes an integral part of the interior.

The second option is a specialized beauty store.

The advantage of this choice is that the table options offered in them are very practical. This is not just an interior decoration. This is an item that is designed for long-term use. As a rule, it has LED backlighting.

The third option is, in principle, obvious, like the two previous paths. Like all products in the world, the table has not escaped the "showcases" of online stores.

Before purchasing a table, be sure to read reviews on the forums or ask friends who have experience with such tables. It is noteworthy that such tables are still not such a sold-out type of furniture, so it is better to look in advance on the search engine for the sites of shops nearby to you.

As a rule, serious stores have their own managers or sales consultants who are responsible for advising potential buyers over the phone. Perhaps this approach will save a lot of time and reduce shopping trips to a couple of times.

How to do it yourself?

In fact, you can make such a table yourself, at home. You don't need deep technical knowledge or special ingenuity. To do this, you will need sheets of wood or plywood, an LED strip, a special microcircuit, wires, a round mirror.

In addition to this, you will need glue (possibly several types), paint and screws.

The work begins with the most basic. Cut out two round rims required diameter(usually 45-100 cm). The mirror is selected with the appropriate diameter.

Of course, the table top can have more than just a circle shape, respectively, the shape of the cut-out table top and mirrors can be chosen at your discretion.

We put a mirror between the two rims and carefully circle the mirror with LED strip. Next, a hole is made to pass the wire there. We attach the microcircuit to the lower part of the tabletop and fasten the legs.

After the brainchild is ready, you can cover the legs and edges with varnish or special paint.

If you still have difficulties with manufacturing, you can contact a familiar carpenter. For a carpenter, this will not be difficult, since this is a daily activity for him, and in half an hour he will do something that would take several hours or even days. Such a person is most likely well versed in dyes and adhesives. Most likely, he has experience in other industrial or construction areas, has a “well-trained hand”.

You will have to look for diode tape, plywood, electrical filling and other elements of the product yourself.

Again, this is okay. Plywood and wood sheeting can be found at a hardware store, and paint-lacquer glue can also be found there. Diode tape is also sold at a hardware store. Small parts can be ordered online, perhaps even at better rates.

Don't limit yourself to templates. It is worthwhile to think carefully about creating a table, perhaps there will be a desire to make an original stained glass window. The variety of stained glass tables is huge. For example, you can make a 3D table. This solution is also called the infinity effect. This will require some neon ribbons and some mirrors. Due to the reflection of light, the surface acquires a three-dimensional image. There are many photographs of colored tables on the Internet. You can look at the sites of furniture stores or ready-made design solutions... The interior, thought out by a professional designer who has posted his work on the web, can become the basis for an idea when creating your table.

When working with a diode tape, you must be extremely careful. Keep your hands dry and wear rubber slippers on your feet.

In fact, it is possible that self-production will be the cheapest and fast way... Another plus is that you can choose the interior yourself.

And if you like it, you can open a shop of such tables yourself. This table can be a great gift.

Did you like the article? Share it

Print article