Colored and green garden arches. Decorate landscape of curly plants
Territory cottage plot Must be in all respects perfect - pleasant to relax and comfortable for work. Beauty, created with her own hands, pleases doubly, and today's innovations in design make it possible to finely decorate the territory of the site. Arches for flowers have a completely special decorativeness, allowing you to create cozy places For rest, zoning space, express expressive accents.
A separate arch will be a spectacular accent of the garden zone, using the Arch group, you can create a tunnel or gallery of amazing beauty, a beautiful wall of their blooming choler can hide the area of \u200b\u200brecreation from prying eyes, or hide not too presentable economic buildings. Arches can also form something like a gazebos - a cozy place to relax.
Garden Arch - not only a wonderful way to decorate the local area, for fusing plants (especially roses), it is one of the most convenient ways to grow
Very simple in the manufacture of a rectangular arch opens the effect of deep perspective space. Bright accents of the composition give no curly plants, but flowers in ads, lawn and a rubble track
Much depends on external view and design material, as well as on which plants will be used for its braid. For the manufacture of the Arch, materials such as wood, metal, plastic, a natural stone And their various combinations.
Robust design with stone supports and a lattice roof, molded by lianams, forms an original shady gazebo where you can comfortably relax on the benches
Such a creative arch is made of logs and dry trunks without bark. It looks bizarre and unusual and plays the role of the gate. If you have unusual ideas - Try to implement them, your garden is the best place for experiments.
Garden dual arches for flowers have a variety of shapes - vaulted, trilty (when several lattices are connected to a single whole), a grid (grille that supports curly plants) and the form of a volume arch with repeating elements (pergolas).
Today, a lot of finished arches is on sale - various wooden structures (from simple to very complex), inexpensive plastic and large variety of wrought. Forged arches with thin, elegant lines are especially beautiful. It is even better for them when the plant does not fully flies the arch, allowing you to admire the beauty of work.
Forged arches are very light and elegant structures that themselves are beautiful decor. In this case, decorativeness adds a forged fence, rear wall and lamp, over time it will be very cozy arbor
You can purchase a finished arch for your garden, but if there is a desire, the arch for flowers can be done on the cottage yourself. Arch for colors made by your own hands will look no worse ready. We describe an example of creating a simple design, which forces to make everyone.
We make the arch from the tree alone
You need to find 4 or 6 wooden pillars or bars (height 2 m, width 100/100 mm or 75/75 mm). Vertically installed pillars will be the supports of pergola, which are attached to two lateral transverse beams, and crossbars are attached to them. A cutting board is suitable for the crossbar (20/200 mm). Poles are installed in a deepening depth of 0.5 - 1 m. Depth depends on the type of soil, for loose soil it should be greater. In order for the design to be practical, part of the poles, which will be plugged, should be processed by bitumen and wrapped in the tale, rubberoid or other waterproofing material. Construction level Check the verticality of the installation. Empty space in the pits can be filled with rubble, but the most reliable way will be, of course, concreting.
Layout of the garden pergola: 1 - support poles or bars, 2 - beams, 3 - crossbars. For the convenience of plant growth, it is recommended to pull the line, the twine, or fill the crossbars in the form of a lattice
The beauty of myself in the country is nice to create your efforts, and such pergola will be an excellent decor and shelter from the heat. It can be placed along the track, in the recreation area. The presence of 4-6 pillars makes it possible to create a real gazebo, in the shade of which you can hide and relax.
In order for the plants to grow well and fled the pergola, the twine can be pulled between the columns. If you do a lattice rack between them, Pergola will look very beautiful. So that the tree is not exposed to insects, atmospheric influences, be sure to treat all parts of pergola with special composition. Lattices can be placed on the roof - it is more convenient for plants and in general the design will benefit from it.
Here is another example of the construction of a wooden arched structure:
If you use metal elements - fittings, corner, they need to be deguted, and then paint. Wooden elements will be more reliable to fix with galvanized materials. The wooden arch is better for plants in the sense that with severe frosts the tree will not be so cold as metal. Sometimes parts of the plants are actuating the glands and dying
An example of the construction of this sad construction Pretty simple, but if you paint it, use carved decorative elements, you will have a very pretty garden arch.
There are also several videos on our topic that can file some ideas to you:
How to plant plants to decorate the arch?
After making and installing the arch, you need to think about what plants you want to put as decorative. And annuals, and perennials need to plant closer to the base of the design. Perennials grow slowly, so in the first year or two, they will be small and special decorative effect will not be. You can land close to them and annual curly plants - Ipomeya purple, fragrant peas, decorative beans. They can decorate the arch in the first year. Alternatively, you can hang in a porridge or in pots beautiful ampelnaya - Begonia, Petunia, Pelargonium. It will give the arch a picturesque look, and you will not need to wait until you grow up, for example, or.
When the plants completely turn the arch to the flowers, it will become a wonderful place - shady and beautiful. The arch is good and when fresh greens shelters the design, but it looks most effectively, of course, during the flowering of plants. It is not by chance that today fashionably decorate the blooming arches Wedding ceremonies - Arches create a wonderful solemn atmosphere, demonstrating the beauty of nature and the ability of human hands.
Arches from roses are one of the most beautiful. You can combine roses varieties, for example, as in this case, the plenty roses decorate the arched construction, while the other varieties planted in alternation with soil plants form a luxurious carpet below
Video demonstrates examples of creating arches and decorating it curly and:
The country area should be pleasant and comfortable to relax and work. The arch for the garden will become an excellent addition to the decorative zone, and will also make it possible to form an excellent place to relax all family members. Such structures may have different forms, such as a heat or in the shape of an arch, each of them can be implemented without assistance, which is very profitable at cost.
On sale today you can meet the arches different designsHowever, inexpensive look very simple, and also performed from plastic, which is subject to the influence of the aggressive environment, which indicates a short life of the design. Whereas expensive models may not come up constructive features Or a shade, but they are most often carried out from the metal, which is very problematic to deliver to the spot.
The arch for the garden often precisely for these reasons is made by domestic masters on their own. The performance of such works is not a challenging task, but even a person who does not have enough experience can cope with this. It is best to use wood for manipulations, as it is just processed and looks natural.
Preparation for work
If you are making the garden arch, you will need to prepare wooden bars Or pillars in the amount of 4 or 6 pieces. Their height should be equal to two meters, while the width is 100 or 75 millimeters. These pillars will have to install strictly vertically, so that they spoke to which 2 side transverse beams will be recorded. They, in turn, will be attached by the crossbars. For the manufacture of the latter, the cross section of which is 20 x 200 millimeters. It is important to choose the right wood, its humidity should not be excessively high, otherwise, while drying, the material will lose its original shape, and the entire design will cease to be smooth.
Selection of material
It is best not to save on the wood, only it will be possible to make an arch, which will serve not one year. If you acquire the material in the summer, it is worth asking about the period when the forest cuts. In winter, such manipulations produce most preferably, since in the trunks there is a smallest amount of juice, which negatively affects high-quality characteristics during operation.
Arch manufacturing technology
Initially, it will be necessary to prepare a deepening, the parameter of which can vary from 0.5 to 1 meters. There will be pillars to be installed. It is worth noting that when the arch for the garden is manufactured, the depth of the stem depends on the species of soil. If you have to work with loose soil, then you should go deep. In order for the design to be a practicality, part of the supports that will be able to burst, it is necessary to handle bitumen or to wrap over the rubberoid. Suitable for these works and only, as well as other waterproofing materials. When the arches are made for the correctness of the installation of the supports, it is necessary to check with the help of a building level, which will provide the verticality of the position of the elements. The resulting empty space in the pits should be covered with rubble, but the fill with concrete becomes the most reliable way.
Made by the arches for the garden with their own hands, you should think about the location of the structure. It can be launched along the track or in the recreation area. If the posts increase to 6 pieces, it will make it possible to form a real gazebo. If there is a desire that the plants are powered by pergola, then the twine is recommended between the colums. If you fill the rail between them, placing them in the form of a lattice, then pergola will have a very attractive look. In order to exclude negative impact Insects on wood, it is better to treat the surface of the elements with a special composition. It will protect the design from the destructive effects of atmospheric influence. Grilles can be located on the roof, so plants will be more convenient to climb upstairs.
Nuances of work
Made by the arches for the garden, the photos of which are presented in the article, and elements made of metal can be used. It may be a corner or fittings. Such blanks for the start are well degreased, and after staining in the desired color. It is best to choose a composition that has atmospheric resistance qualities. Wooden elements are recommended to be fixed with galvanized parts. The wooden arch is better combined with plants, however, with severe frosts and subsequent thawing wood, it can change its original sizes, as well as to darken that it does not always look very attractive. It is important to take into account that plants, trying on the metal, may die.
Conclusion
Pergolas-arches for the garden can be made from combined materials, such as wood and OSB, with which you can make the wall with deaf. Using as you can large quantity Materials, you have the opportunity to embody all your designer designs. Wooden arches for the garden can be both full-fledged arbors, if it is used for this to use polycarbonate that will become underfloor material. Its mount is performed on the frame, pre-made of wood or metal.
The cultivation of curly colors is impossible without providing them with a reliable support. In this capacity, any backups are used: pillars, fences, strained threads, etc. However, the most spectacular spectacle can be obtained by forming a tandem curly with special architectural elements. One of the most popular similar designs is the arch - arcuate construction on two supports. Despite the highest decorative qualities, the design of it is very simple, so the arc for colors can be performed in the country with their own hands. Consider 3 options for its manufacture of various materials.
The simple model of the arches with a height of 2130 mm and a width of 1830 mm is created from two armature sections bent into the arc connected with metal rings. The arch for flowers is performed with its own hands without the use of welding, a thin wire is used to connect the parts.
Metal arch for flowers at the cottage
Metal arch looks like a lightweight, weightless design, accusing greens and flowers
The distance between the arched arcuate sections is 31-32 cm. To hold on the spot, they are bought into the ground at least 40-45 cm. Between the cross-crossing rings (d \u003d 30 cm) observe the distance of 15 cm.
Sketchy Metal Arch Image
List of materials for making metal arch:
armature (rod) d \u003d 10 mm, length 6 m - 2 pcs.;
armature (rod) d \u003d 6 mm, length 0.94 m - 9 pcs.;
soft wire;
primer, enamel for painting;
pins for template - fittings d \u003d 10 mm, length 0.25 m - 10 pcs.;
Rope L \u003d 0.9 m.
Step-by-step production scheme:
1. First of all, it will be necessary to bend the pieces of fittings D \u003d 10 mm to obtain an arched opening. To do this, you can use a simple pattern from a pin with a length of 0.25 m, driven into the ground along the calculated contour of the arch.
Cut the reinforcement on the pins using a metal hacksaw
The contour is painted directly on the ground as follows: the rod is driven into the ground, the rope l \u003d 0.9 m is tied to it and, taking a free end in hand, paint or chalk delineate semicircle. After that, starting from the upper point of the semicircle, ridges in the ground.
Half-chart for template
High-Circle Locking With Rod, Rope and Paints
The resulting template to use is very easy. In order to give the arc an arc-shaped form, the reinforcement d \u003d 10 mm enhanced around the pins. The bending will be more smooth if there is a durable, but flexible material between the crawls and the reinforcement. Side Stripe, DSP Plank, etc.
Bending of reinforcement around the pins
The bending of the reinforcement is a time-consuming process, to cope with which is easier together with the assistant
2. In this model, the arches for connecting the reinforcement sections are used metal rings. They are made of more subtle than basic sections, reinforcements D \u003d 6 mm.
9 pieces of 94 cm are cut from the ligament of reaggement of 94 cm and form rings from them with a pipe bender. In the event that you do not have this tool, the arch design can be simplified and instead of a rings to connect arcuate sections with straight rods. Look such an arch will look easier than the original option, but it will be quite functional.
Formation of rings from reinforcement
Formation of rings from reinforcement with pipe-bend
3. The bent the main sections of the arch are installed in the ground, deepening the reinforcement by 40-45 cm.
Installation of metal arcs in the ground
4. At a distance of 61 cm from the bottom of the arches, metal rings are tied with a soft wire, observing the distance of 15-20 cm between them. They will allow you to connect arcuate sections together and fix the form of the arch.
Rings mount to metal sections arches
5. To protect the arch from corrosion, all metal parts of the product are covered with primer, and then layer oil paint.
Option # 2. Wooden Arch from Bruus
The traditional wooden arch bar is the simplest and inexpensive structure, which fit into the design of any garden. This garden arch for flowers, a height of 2.2 m, consists of two vertical frames, two inclined and one horizontal parts.
Wooden Arch for Flowers
Lightweight wooden arch helps split the garden space on functional zones
Materials required for construction:
bar 40x50 mm, length 2 m - 4 pcs.;
bar 40x50 mm, length 0.35 m - 4 pcs.;
bar 40x50 mm, length 0.65 m - 2 pcs.;
wooden planks 35x20 mm, length 0.65 m - 24 pcs.;
wooden strips 35x20 mm, length 2 m - 2 pcs;
metal corner, length 0.25 m - 4 pcs.;
self-tapping screw or nails;
primer, paint.
Plan of structures of a wooden arch:
1. Loaded two vertical frames. Each frame consists of two vertical supports of 2 m, two cross-0.65 m and one plank in the middle, 2 m long.
Rama serves as the basis for the formation of sidewall arches
2. Collect the sidewall arch. On the frame, the strip 35x20 mm long is 0.65 m long with a pitch of 0.2 m. The edges of the slats are cut under 45 °, they grind the irregularities with sandpaper or grinding.
3. Metal corners are fixed to vertical racks. Subsequently, they, being installed in the ground, will play the role of the foundation and will be able to keep the design in a given position.
4. Cut bars for the top of the arch. Inclined bars with a length of 0.35 cm - 4 pcs., Top horizontal length 0.65 m - 2 pcs. They are fastened with each other by self-draws.
5. The upper part of the arch is connected to the sidewalls.
The arch is fully assembled on Earth
The arch is fully assembled on Earth, and then - raise and install vertically permanently
6. They dig holes at the place of installation of the arch. Fixed metal corners in the ground, setting the arch in the level. In order for the wooden structure to serve longer, the stones can be substituted under the supports.
Stones under supports increase the reliability of the design
7. B. wooden surfaces The primer is applied, then layer varnish or paint.
Wooden garden arch
The lacquer layer protects wood from corrosion and increases the decorative properties of the arch
Option # 3. Arch with a base of gabions
A comfortable support for curly flowers will be a wooden arch, side parts and rounded top of which are formed from a galvanized grid. Another unexpected detail of this design is the foundation of two massive gabions. They firmly hold the supports of the Arch, eliminating the need to pour a concrete foundation or boil the rack into the ground.
Unusual arched construction - BRUSEV, Mesh and Gabion combination
Materials used:
bar 65x45 mm, length 1800 mm (4 pieces) - vertical supports;
bar 65x45 mm, length 800 mm (2 pcs.) - Cross beams;
bar 21x10 mm, length 1380 mm (8pcs) - Reiki to create grooves;
mesh sheets galvanized, width 500 mm, length 1800 mm (2 pcs.) - For sidewalls and top arches;
metal doublersion grid - for the manufacture of gabions;
galvanized wire;
Screws.
Stages of production Arch on Gabions:
1. From grids produced two gabions with dimensions of 100x50x50 cm. Each gabion consists of three boxes: two - for the base (wooden supports arches will be installed in them), one - combining, smaller in size. Details of gabions are connected by a solid galvanized wire.
Gabion box is made of durable grid
The Gabion box is performed from a solid grid, ideally - from a special, so-called "Gabionova"
2. On each transverse beam, the milling cuts of 4 mm wide, 500 mm long. In this groove in the future the heat grid will be inserted.
Plants on the arches look very beautiful, and therefore are often used to decorate garden and country sites. What curly flowers can be used for arches - vertical gardening? This will be discussed.
Semids
Fragrant peas (china siny) - Frequently used in vertical landscaping Liana. Popularity Plant received due to unpretentiousness in care and abundant flowering. In total, gardeners offer 16 fragrant peas groups, differing period of flowering, height and color. If you wish, you can choose a variety that will bloom even on a darkened garden.
Nasturtium - Drazing Liana. For it, atponed rapid growth, and this must be considered when landing. Very decoratively looks a variety of nasturtiums ingoing (known as Canary). This is an annual liana, growing up to three meters high.
Flowers with bright yellow inflorescences with corrugated edges. They sow her to seedlings in February, and at a permanent place planted in May, when the threat of frosts.
Pleet roses
When choosing a variety, it is necessary to pay attention not to flowers, but on the shape of the bush. Most of the plants have thick-related shoots, so they are not suitable for arched cultivation.
Among the numerous varieties of plenty roses with large inflorescences and relatively flexible shoots have proven well:
· Zephirine Druhin;
· Constance SPRY;
· NEW DAWN.
They are used to design low arches.
For high forged supports, varieties are recommended with plastic wood. They are then comfortable to removed and turn into rings for subsequent wintering. Good feedback Get fine-cooling plenty roses-races:
· Jasmina;
· Florentina;
· Excelsa;
· Dorothy Perkins;
· Bobby James.
It is necessary to plant roses on one side of the Arch, because thickening can lead to fungal defeat. Reliating shoots need to be tied up to the arch.
Before the onset of cold leaves with supports are removed, folded and insulated in two layers.
Clematis
The bright major inflorescences of Clematis Clematis on decorativeness are not inferior to plenty roses. These perennial lianas bloom, starting with the middle of the summer and to the most frosts.
The following varieties received good recommendations:
· Patence. Can grow up to five meters. Buds are large - up to 17 cm in diameter;
· Jacmana. It has large inflorescences - a diameter of up to 20 cm - purple, blue or purple. The duration of flowering is two months (from the beginning of July and until the end of August). The variety feature is thin shoots that need a strong-based basis.
Before the onset of cold weather, shoots are removed from the arches and cut into a height of 20 cm. A peat or foliage is used as a heater.
Bougurenellium
If you need to get a beautifully decorated arch, then you can plant Bougurenellia. The plant is allowed to grown in a pot, turning long shoots around the support.
Bougurevelia is ideal for the design of the shady corners of the garden. In addition, it is unpretentious in care and resistant to various diseases and pest attacks.
Bougurenellia can be grown both through seedlings and landing immediately at a permanent place.
Glicinia Blue Mun.
This grade of wisteria attracts a variety of colors. You can choose a plant with red, blue, white or purple flowers. It blooms on the third year after landing.
The plant loves light, so it is necessary to plant wisteria in the open plot. To stimulate flowering, it is fed by superphosphates at the beginning of spring.
It is worth noting that Liana is very capricious in care, but it looks incredibly attractive.
IPOMEY
Ipomoya - annual liana with large flowers of blue, purple, red or yellow color in the form of a saucer. They are dismissed early in the morning.
The maximum length of the Liana is 1.5 meters. The leaves of the heart-shaped form are also large - up to 12 cm long.
Ipomeya is simple in care, can grow on soils of any type. Easy tolerate drought.
Kobey climbing (monastic bells)
Kobey climbing in the middle lane of Russia reaches two or more to height. Flowers large flowers In the form of white bells or lilac color.
The plant is unpretentious. It can be grown in the shade, and in the sun. It is also undemanding to soil.
Sit down Kobey on seedlings in February. Permanent place tolerate in mid-May.
Campxis rooted
Campsis rooting - a rising plant growing up to 12 meters in height. Liana has unusually looking flowers: they are elongated in the form of a tube and have several shades at once, ranging from orange and finishing with red and yellow notes.
The plant grows well in the shade, but for lush flowering it is better to choose well-lit sections.
Hop
Hop is a long-term unpretentious in the care of liana. During the season, it can grow at 11 m, so it is capable of screaming a high arch in a couple of years.
For the decor of the summer cottage, the following varieties are most often used:
· Japanese hop. Lyan is growing slowly, but is distinguished by beautiful foliage - motley and carved. Plant seeds. The plant can fully master the proposed support for a couple of years;
· hop ordinary. Distributed everywhere. Liana undemanding in care and can grow on any soils.
When growing hop need to remember that it actively grows up, exciting new lands.
Arch design - Features
The material that is planned to be used for support must be durable. It must withstand the weight of the plant in summer, and the severity of the snowy Nast.
Light plastic arch for curly perennials use it is impractical. In the fall, it will need to be disassembled, and in the spring to collect again. It is suitable for sealing, growing and blooming only one season.
When choosing a frame of arches, you need to follow so that it fit into the overall concept of garden design.
The height of the arch should be at least 2.5 meters. To conside, it is necessary to take human growth and the ability of Liana to grow. For the same reason, growth activity - the arch width cannot be less than 1, 2 meters.
Each owner of the land plot wants to equip it in such a way that it is not only functional and convenient, but also beautiful and pleasant. One of the most successful decorative elements to decorate the household space, which gives the landscape originality and originality, is an arch for colors. In the country, according to many, as well as in the house, everything should be completely comfortable. Today's new design solutions create an excellent opportunity to easily decorate the plot. And not the last place in the list of all sorts of options occupy the arches for colors.
In the country
Photos of these surprising beautiful designs You can see not only in the appropriate literature, but also in many glamorous magazines. And it is not surprising. After all, a special atmosphere of the holiday at any events is created by the arch for flowers. Photo of newlyweds on her background saw in her life each. But in order to admire such beauty, it is not at all necessary to organize any event.
Arches for flowers at the cottage - today quite fashionable trend landscape design. At the same time, they not only possess truly perfect decorativeness. Such amazingly beautiful floral structures also allow you to create cozy places for recreation, zoning space.
Relevance
Separate arches, according to designers, are a spectacular emphasis in the garden zone. Tunnel or a surprisingly beautiful gallery, a wall of flowering trellis, arbor, hidden places for recreation and solitude - all this can be created using an arge for flowers at the cottage. The photo of such landscape solutions is almost every specialized magazine. In addition, with the help of such blooming structures, you can hide and not too presentable utility buildings.
Species diversity
Arches for flowers at the cottage are two, and sometimes three or four vertical racks with a crossbar at the top. The form of the latter may be the most diverse. The main purpose of such structures on the site is to create a support for curly plants, zoning space or creating places to relax. Sometimes the arches are arranged for registration of the entrance to the site.
The designs of these compositions have the most different forms. The most popular vaulted and tropping arches connecting two lattices. There are also high-end versions that are most often used to design wedding events, as well as pergolas - bulk designs with repeated details.
Very simple in the manufacture of rectangular arches create an effect of deep outlook in space. Bright accents of such a composition can give not only but also lawns, rubble tracks or flowers in Kashpo.
Strong structures with stone supports and a lattice arch, braided lianams, make it possible to create original shady gazebos, inside which you can relax on the bench.
Today you can find various options Already ready arches. These are a variety of wooden structures - from complex and simple, inexpensive plastic or wrought-blooded blanks. The latter, although they have a higher cost, however, thanks to thin, elegant lines are especially beautiful. They are very spectacular even when the plant has not yet completely fell apart.
Requirements for the choice
I decide to buy a ready-made product or ma it manufacturing with your own hands, the owner of the plot must keep in mind some nuances. First, the design should be as strong as possible, since the total weight of curly plants, which rely on the construction, is significant.
In addition, this landscape element must be made of durable material because it round year The natural factors such as rain or snow, sun, etc. are affected. In addition, like any decorative element, the arch should fit well into the overall space.
In addition, there are also requirements for sizes. The arch must have a height of a higher human growth, so that it is convenient for it to pass without leaving. The width also needs to be done at least one hundred and twenty centimeters. This is explained by the fact that for the arch in the country they grow strongly, and in narrow sizes there is a feeling of non-accuracy and crowding.
Materials
The choice of them is very large for today. It can be wooden planks, bars and lattice, plastered brick or plastic, even vine. On large spaces, stone structures will look at the winning. Very popular for today, the option is for flowers. You can buy wrought-iron designs in many stores selling products for the garden. Almost all of them are made from the materials resistant to the aggressive external environment and covered with varnishes or paints that protect metal from corrosion.
Some designs from designers can combine various options for elements. Much when the material is selected, it depends not only on the appearance and type of design, but also from what plants are supposed to be used for braid.
Selection of colors for arch
After the design is installed, the time comes to decorate it. To do this, it is necessary to decide in advance which flowers to plant. For the arch in the country it is more profitable to use a long-term curly Chinese lemongrass, Clematis or pleet rose. It is not bad to look at the pergole of wisteria, grapes or honeysuckle.
Such annuals as fragrant peas, hops, a curly nasturtium and ordinary ivy are suitable. You can choose other varieties. But at the same time it is necessary that these are curly plants having a magnificent greens and beautiful flowers whose vacations can grow up to three or four meters. It is important to relate the choice and with climatic conditions This locality. This is especially true when planting perennials, since some plants require special conditions for a successful growing season.
Caring for flowers
Some curly varieties, for example, a plenty rose or garden grapes, should be stolen for the winter, as they are very sensitive to winter frost and temperature differences. Plants are recommended to plant as close to the base of the arched design.
It should be remembered that perennials are very slowly developing, so in the first years the two of their increase is slightly less noticeable. Therefore, it is not possible to initially wait for a special decorative effect. Arch for flowers in the country - with their own hands made or purchased in the store - must necessarily be properly decorated with flowers. If the owner doubts his knowledge, it is better to invite a specialist who competently chooses plants and falls out them. But if there is at least some kind of skills in the garden, decorate the arch of curly flowers will not be much difficulty. It is only necessary to include fantasy and arrange it in your taste, observing the agrotechnical requirements for the varieties selected.
It is possible, for example, near the perennials to land and such annual curly plants, like fragrant peas or a miphome. In the first year, they give the brightness to the color of the graceful design of the arch. Another original option for the design of this gardening is suspended kashpo or plants in pots - Begonias, Pelargonium and Petunia. So the designs will receive a picturesque view, and most importantly, the gardener will not need to wait until planted clematis, or but when these plants are completely dug around the design, the arch will become the most wonderful place on the site - beautiful and at the same time creating a shadow. Creating such a landscape structure, do not forget about one important factor - about the departure and maintenance of an attractive type of plants, which collapsed the arch for flowers at the cottage.
Do it yourself
Photos of these amazing compositions, pleases, can be seen in many prestigious magazines. But it is not necessary to think that blooming pergola or a grinding design - the wing of the selected. You can, of course, buy an arch for your garden or cottage in the store, but if there is a desire, it is quite possible to build it with your own hands. And, it should be noted that often the design collected by independently, it looks no worse than the acquired. The main thing is to know
In the country's cottage, many use the simplest building materials that are at hand. It can be metal pipesWooden poles or bars.
Beauty at home is always more pleasant to create own forces. The arch can be positioned both along the track and in the corner, separating the area for rest.
Sequence of work
Of wooden material Make an arch is easiest. To do this, you will need four or six pillars or bars with a height of about two meters and a width of ten centimeters. Mounted vertically, they will become supports for future pergola. They will need to attach side transverse beams, and to the last - crossbars from edged board 20x200 millimeters size.
Poles need to be installed in pre-prepared pits with a depth of 0.5 to 1 meter. The depth must be chosen depending on the type of soil: it should be more for loose soil. Be sure to use the construction level to check the verticality of the installation. In order for the plants on the archive to grow well and tightly it, it is possible to pull the twine between the colums. And if you fill between the lattice of the rail between them, then such pergola will especially look beautiful.