How to install kermi radiators correctly. Installation installation of Kermi radiators
Those specialists who work in the field engineering communications, they know very well that installation of Kermi radiators is an excellent way to provide your country cottage with warmth and comfort. After all, first of all, German heating devices are famous for their reliability. Agree, this factor is very important.
Even a device that heats very well, but often breaks down, cannot be good. Inexpensively in the capital and region, you can in our online store. If you need installation of Kermi radiators in Moscow, then our engineering and installation company "Seti Service" is ready to help you.
There are many advantages of ordering the installation of Kermi radiators from us both at reasonable prices, and in the ability to immediately order installation, and in professionalism ... All connoisseurs of strict lines and correct geometric shapes will appreciate the design of these models. The heat dissipation of Kermi radiators is excellent. And the cost is not that high.
Kermi radiators are made of steel. There can be from one to three panels. The thickness of one panel is 1.25 millimeters. Models with special ribs can be ordered to increase heat dissipation. To install these units, you need to turn off the water. Our masters will leave on the agreed day and will do everything necessary work... Quality is our profile.
Connection, installation of heating batteries Kermi in Moscow
As we have already said, these heating units are suitable for private homes. This is due to the fact that the pressure that they withstand cannot be high. So installing Kermi batteries welcomed in individual heating communications. The external design of these radiators is very modern and beautiful. Interested in Kermi? We will answer all your questions!
The advantageous feature of this equipment is the absence of odor. And already battery connection Kermi and sheer pleasure at all. They have proven to be excellent in a one-pipe and two-pipe layout. Agree, this is very good characteristic! All necessary valve fittings have already been prepared and assembled at the factory. Therefore, the control of the temperature level will not cause any difficulties.
After you have purchased the necessary radiators, you should think about all the necessary components. If you purchase equipment from us and order its installation, then we will deliver the selected radiators absolutely free. By the way, the cost of Kermi equipment is quite low. If you have already bought Kermi radiators from another company, you can still contact us. Order now!
Sale, installation, replacement of Kermi radiators
We can confidently assert that, like the installation, sale of Kermi batteries is enjoyable. After all, these units are of very high quality and are characterized by increased reliability. As known, German quality in everything is incredibly high.
The entire production process is constantly monitored. All types of work are carried out extremely accurately and accurately. You need replacement of Kermi radiators only after many years. If you would like to replace the old batteries with new Kermi radiators, you are welcome to us, in the "Service Network"!
By the way, it is very important to follow all the rules when installing these units. After all, otherwise you will not be able to feel the difference between high-quality equipment and the one that was installed in you earlier. or at home from our company - consistently high reliability indicators.
Quite often, homeowners complain about poor-quality heating, many believe that the reason is in the heating devices, but most often the reason for this problem is poor-quality installation of radiators or the heating system as a whole.
It is not easy to choose heating radiators on your own, since you need to know many nuances and subtleties associated with the room heating system.
For example, centralized systems are characterized by hydraulic shocks that can rupture some types of batteries.
Autonomous systems do not have special threats, but they also require the right selection. heating appliances that meet the technical and operational requirements.
Each manufacturer manufactures its products for certain systems, only a professional will be able to competently choose the most suitable heating units among a huge assortment.
Naturally, you can consult with the seller of heating equipment, and he will certainly help you make your choice, but the installation of radiators should be trusted only by a professional.
 |
 |
What are the advantages of working with our company?
Huge selection of the best heating technology.
Affordable prices.
Assistance in technical calculations and selection of radiators suitable in terms of power and dimensions.
Professional advice.
Operational work of managers, couriers and installers.
Possibility of receiving a whole range of services: purchase, delivery, turnkey installation.
Warranty for the purchased equipment and assembly work made by our employees.
The purchase of high-quality radiators does not guarantee the efficient operation of the heat supply system. The key to high-quality heating is the professional organization of the pipeline and the connection of radiators.
_______
Why is it not worth installing heating equipment yourself?
Lack of experience and knowledge can result in serious damage to the instruments and malfunction of the system.
An unprofessional installation is most often the cause of defective instrument operation.
Accidents: leaks, floods and even battery rupture.
Our company is engaged in the sale of heating equipment, and also offers customers delivery to the address and assistance in creating heating systems and connecting heating batteries.
_____________________________________________________________________________________________________________
Our key advantages:
- A wide range of heating technology.
- The whole range is available.
- The most affordable prices for radiators and installation work in Moscow.
- Extensive work experience.
- Individual approach.
We offer the services of proven installers with experience and a huge store of knowledge, special education and recommendations. Services such as replacing old batteries and installing new modern heat sources are in great demand in Moscow and any other city, and finding a trusted master has always been a problem.
_____________________________________________________________________________________________________________
A short list of installation services:
- Dismantling of old units.
- Build the system from scratch.
- Replacement of supply pipes and return lines.
- Installation of radiators and shut-off valves.
- Diagnostics and service.
We have found the best plumbers, engineers and designers who are ready to help you arrange your home or office at any time convenient for you. Our company has a large staff of field craftsmen, so you won't have to wait long.
Installation of heating systems from scratch should consist of several stages:
- Design and technical calculation of power.
- Selection of radiators, pipes, shut-off and control valves, thermostats.
- Organization of the pipeline and equipment connection.
- System startup and check.
By calling a contractor, you free yourself from many problems and worries, save your time and get a guaranteed high-quality heating system, made in accordance with the latest standards and professionally connected radiators.
_______________________________________________________________________________________________________________
How is the heating battery connected?
- Our specialist arrives on the appointed day.
- Secures the mounting brackets.
- Installs radiators.
- Connects devices to the pipeline.
- Conducts a test run.
- Advises the customer on the operation of the heating system.
Our installers go all over Moscow, it is possible to go to the Moscow region. We give warmth and make sure that cooperation with us brings pleasure to every client. Our company always meets new and regular customers halfway, so the cost of services can be reduced or arranged in installments, at your service are favorable payment terms, drawing up a contract and a guarantee not equipment and installation work.
Call right now, order radiators with delivery + installation and get a discount! Don't miss the opportunity to make your home warmer and more comfortable.
Cost of installation and installation of Kermi radiators
| № | Name of works: | Unit meas. | price, rub. |
| 1 | Dismantling the heating radiator | 1 PC. | 600 |
| 2 | 1 PC. | 2800 | |
| 3 | Installation of a heating radiator (polypropylene connection) | more than 2 pcs. | 2400 |
| 4 | Installation of a heating radiator (metal connection) | 1 PC. | 5400 |
| 5 | Dismantling / installation of a radiator on a ready-made connection | 1 PC. | 1500 |
| 6 | Dismantling of heating pipes (D = 1/2) | r.m. | 100 |
| 7 | Dismantling of heating pipes (D = 3/4) | r.m. | 150 |
| 8 | Dismantling of heating pipes (D = 1 ") | r.m. | 250 |
| 9 | Through wall drilling in gypsum plaster, foam block up to Ø20 mm | cm. | 3 |
| 10 | Through wall drilling in brick up to Ø20 mm | cm. | 4 |
| 11 | Drilling through walls in concrete up to Ø20 mm | cm. | 8 |
| 12 | Through wall drilling in plaster, foam block up to Ø32 mm | cm. | 4 |
| 13 | Through wall drilling in brick up to Ø32 mm | cm. | 6 |
| 14 | Drilling through walls in concrete up to Ø32 mm | cm. | 11 |
| 15 | Heating pipe laying (polypropylene D = 20) | r.m. | 150 |
| 16 | Heating pipe laying (polypropylene D = 25) | r.m | 200 |
| 17 | Heating pipe laying (polypropylene D = 32) | r.m. | 300 |
| 18 | Thread cutting (D = 1/2) | PC. | 350 |
| 19 | Tapping (D = 3/4) | PC. | 500 |
| 20 | Tapping (D = 1 ") | PC. | 750 |
| 21 | Installation ball valve(D = 1/2) | PC. | 350 |
| 22 | Ball valve installation (D = 3/4) | PC. | 500 |
| 23 | Ball valve installation (D = 1 ") | PC. | 750 |
| 24 | 1 PC. | 3900 | |
| 25 | Installation of a heating radiator (iron supply) | more than 2 pcs. | 3400 |
| 26 | Installation of a non-standard size heater, cast iron radiators on legs, radiators-benches | PC. | 4400 |
Buying or renovating a private house is definitely an important and joyful event. However, it has many different difficulties, the solution of which does not always have the strength and time. For example, the "heat" problem of your home, which cannot be left for later. But at the same time, natural questions arise: what is the cost of installing heating batteries? What brand of radiators should you pay attention to? How will the heating device be installed and how long will it take?
We will be happy to help you with making such an important decision! Our company, which is an official dealer, namely "Kermi", will give you a quick and free consultation on all questions of interest, will help you with the choice of a suitable heating battery, the warmth of which will delight you even on the rainy days of Moscow. It is worth noting that the cost of installing a radiator will also greatly delight you. In most cases, it is fixed and is the average on the market.
Why exactly "Kermi"? These radiators are made from the best modern materials, namely steel. The radiator will look presentable for a long time and will harmoniously complement the interior of your home! Kermi has a long history and a good reputation among customers. In addition, radiators of this brand are extremely easy to install and durable.
Of course, the installation of batteries has various nuances that our masters will explain to you for free! You just need to call us and send us a plan of the room where the installation of the selected radiator will be carried out. Our engineers will give you comprehensive answers to all your questions.
The cost of installing heating radiators in a private house is on average about 250 thousand rubles. One cannot but agree that heating in a house is extremely important point, on which you cannot save and, of course, you should trust a trusted brand and craftsmen who will save your precious time and money.
Our engineering department carries out installation of heating systems, cold and hot water supply and sewerage systems, with any level of complexity.
During installation, only high-quality equipment and materials are used that have been used by our specialists for two decades.
Estimated installation cost table
| Name | Description of work | PRICE | |
|---|---|---|---|
| BOILER ROOM: (installation of any complexity) | |||
| Electric boiler installation | Installation, connection to the system | From 6.000 | |
| Installation of a wall-mounted boiler (single-circuit) | From 8.000 | ||
| Installation of a wall-mounted boiler (double-circuit) | Installation, connection to the chimney, connection to the heating and water supply system | From 10.000 | |
| Installation of floor standing boiler up to 60 kW | Installation, connection to the chimney, connection to the heating and water supply system | From 14.000 | |
| Installation of floor-standing boiler up to 140 kW | Installation, connection to the chimney, connection to the heating and water supply system | From 20.000 | |
| Installation of a floor-standing boiler over 140 kW | Individually | Individually | |
| Installation indirect boiler,
combined heating up to 200l | From 6.000 | ||
| Installation of an indirect boiler, combined heating over 200l | Installation, piping, connection to heating and water supply systems | From 8.000 | |
| Installation of the safety group | 1.200 | ||
| Expansion tank installation | Installation, connection to the heating system | From 1.500 | |
| Circulation pump installation | Installation, connection | From 3.000 | |
| Installation? Of the distribution manifold in the boiler room | Installation? Combs for pumping groups | From 2.000 | |
| Installation of the pumping group | Installation, connection to the heating system | From 3.500 | |
| Installing the hydraulic switch | Installation, connection | From 2.000 | |
| Burner installation (gas, diesel) | Installation, connection, adjustment, launch | From 8.000 | |
| Installation of remote control of the boiler room | Installation, connection to systems | From 5.000 | |
| Various jobs by boiler room | Individually | Individually | |
| HEATING, FLOOR HEATING INSTALLATION: | |||
| Installation, installation of a heating radiator, with laying and connecting pipes | From 3.000 | ||
| Installation of a heating convector, with laying and connecting pipes | Assembly, installation, connection | From 3.000 | |
| Installation of water underfloor heating | Insulation laying, pipe laying in clips | From 600r / m2 | |
| Manifold cabinet installation (external) | Installation | From 1.500 | |
| Manifold cabinet assembly (built-in) | Stroba (brick, foam block), installation | From 5.000 | |
| Installation of a collector (manifold) up to 6 circuits | From 4.000 | ||
| Installation of a collector more than 6 circuits | Installation, connection to the heating system, water supply, underfloor heating | + 500 per circuit | |
| Installation of riser pipes | Installation | From 500 | |
| Installation of a room thermostat | Installation, connection | From 1.000 | |
| Installation of a thermostat on heating radiators | Installation | From 200 | |
| Stroba (brick, concrete, foam block, etc.) | Individually | Individually | |
| Installation of insulation on the pipe | Laying insulation on the pipe | From 50r / per m | |
| Heating system pressing | From 3.000 | ||
| Pressing system underfloor heating | Commissioning, commissioning | From 3.000 | |
| CHIMNEY: | |||
| Chimney installation (inside the house) | Assembling and fixing the components of the chimney | From 1.500 | |
| Chimney installation (outside the house) | Individually | Individually | |
| Installation of a coaxial or turbo chimney | Installation, hole punching | From 2.500 | |
| WATER SUPPLY: | |||
| Installation of a flow type water heater | From 3.000 | ||
| Installation of a storage type water heater | Installation, connection to the water supply system | From 4.000 | |
| Installation and connection of the water outlet | Installation of water sockets for hot or cold water, with pipe laying | From 1.400 | |
| Installation of pipes for the cold water supply system | Installation of the pipeline from the source to the entrance to the house | From 4.000 | |
| Installation of a borehole pump | Installation, connection | From 5.000 | |
| Installation of a submersible well pump | Installation, connection | From 4.000 | |
| Installation pumping station | Installation, connection | From 4.000 | |
| Installation of a hydraulic accumulator | Installation, connection | From 2.500 | |
| Installation of a drain valve in a well, well | Installation, connection | From 2.000 | |
| Installation of pressure switches | Installation, connection | From 2.000 | |
| Installation of the automation unit for the pump (dry-running protection) | Installation, connection | From 2.000 | |
| Installation check valve | Installation | 200 | |
| Pressure reducer assembly | Installation, connection | From 800 | |
| Installation of a cold water meter, hot water meter | Installation, connection | From 2.000 | |
| Installation of fine filters | Installation | From 700 | |
| SEWER DRAIN (inside the house): | |||
| Installation sewer pipe to the point of discharge | Installation, connection | From 1.600 | |
| Installation of the funnel (without roof access) | Installation, connection | From 2.000 | |
| Installation of a sewerage plank bed | Installation, connection | From 2.600 | |
| Installation of a sewer riser | Installation, connection | From 2.000 | |
| Installation of the ladder | Installation | From 1.000 | |
| Sewerage check valve installation | Installation | From 1.000 | |
| Installation of a sewage pumping unit sololift | Installation, connection | From 4.500 | |
| Installation drain pump | Individually | Individually | |
| Water analysis | Installation, connection | From 1.000 | |
| Selection of a water treatment system based on the obtained water analysis | Individually | Individually | |
| Installation of a water treatment plant | Installation, connection, commissioning | Individually | |
| Replacing the filter cartridge | Installation, connection | From 300 | |
| ELECTRO / INSTALLATION (equipment) | Cable routing, connection | Individually | |
| OUTDOOR WORKS (various kinds) | Individually | Individually | |
| INSTALLATION OF SANTECH / EQUIPMENT | Individually | Individually |
What heating radiators to buy, what to choose and who to entrust the installation of heating devices? As in other matters related to the construction of a private house or renovation of an apartment, you can completely take over the solution of all issues or entrust the work to professionals.
But when installing heating, a large number of difficulties, while the heating system is planned to be mounted once, and I want it to serve for many years and not make you regret the money that was once saved due to the subsequent removal and installation of the radiator. In this article we will try to figure out how to correctly create a heating project for your home, and we will tell you about the principles of installing and connecting kermi radiators to the heating system.
Any search engine on request will give out many sites that will make a project for you without any problems and make a list of equipment that you need to purchase (specification). The cost of these documents will directly depend on the quantity square meters in your home and the level of complexity of the heating network. In addition, a number of other factors are taken into account, which also affect the cost of creating a project. We recommend that the prepared documentation be provided to installers for familiarization, or take into account the information provided by equipment suppliers, since heating devices differ in configuration.
In this article, we will not go deep into the installation and adjustment of heating boilers, the laying of pipe lines, the purpose of pumps, which heating system to use in a particular case. Here we will only discuss the principles of installing heating radiators. Buy heating radiators with complete set mounting accessories are no problem. After all, KERMI steel radiators are supplied with a complete assembly kit.
Complete set of radiators Kermi (Kermi) FKV, FKO
The standard set of the KERMI FKV radiator includes:
- brackets for mounting the radiator on the wall;
- Mayevsky valve;
- thermostat valve;
The standard set of the KERMI FKO radiator includes:
- a heating radiator, selected by you by standard size;
- bracket for fixing the device on the wall;
- plug;
- Mayevsky valve;
- dividing plug;
- a wrench for installing a dividing plug;
- dense plastic packaging.
Installation (installation) of radiators with bottom connection
The principles of assembling radiators with your own hands are quite simple. First of all, we remove the mounting plates from the packaging. Do not rush to completely delete protective film from the radiator, it will keep its surface in perfect condition until the end construction works in the House. Next, you fasten the plates to the walls (it is necessary to correctly calculate the mounting height, the distance between the plates: they must be at the same level). If you install the brackets incorrectly, the heating radiator may be installed crookedly, or simply will not fit into the grooves. After this operation, slide the radiator onto the mounting plates. We remind you that the distance from the floor to the radiator and from the radiator to the window sill should be from 10 to 13 cm above and below.
Thus, we have installed heating batteries. After this procedure, you need to connect the battery to the heating system. This requires additional accessories that are not included in the standard kit. Different accessories are required for radiators with bottom and side connections. The KERMI FKV is connected to the heating system thanks to a connection group (multiflex), conical inserts, a fitting (Eurocone) with a union nut 2/3 (this fitting is purchased together with pipes). The connection sequence is as follows. We take two conical inserts and place them tightly in the radiator connection pipes, after which we wind the connection group and pull tightly wrench... Next, we take the eurocone, attach it to the pipe and simply connect the pipe and the multiflex (when using polypropylene pipes it is necessary to additionally purchase two tapered inserts that fit between the fitting and the multiflex). The most important thing to remember is that in the radiator the coolant flows in a certain direction, therefore, the supply is always an internal tube, and the return is an external one. Finally, we left the simplest thing: the installation of the thermostat. You just need to screw it onto the mounting place.
Replacing heating radiators with bottom connection
is not difficult. Before starting work, it is necessary to shut off the coolant supply ( hot water) into the heating radiator, this is quite easy to do, since this feature is already provided on the multiflex. After that, you should unscrew the connection between the radiator and the multiflex, and then simply remove the radiator from the mounting plates.
Installing a side-connected radiator with your own hands
First, we recommend that you read the installation instructions for the radiator that comes with the kit. It describes some of the features of the installation of heating batteries, such as: the supply of the coolant must be made at the top point of the heating battery, and the return flow must be at the bottom of the radiator. It doesn't matter which side the supply and return will be. In order for the THERM X2 system to work correctly on batteries with 12, 22, 33 types, you need to install a separating plug on the return line, but everything is in order.
At the first stage, we install the mounting plates on the wall: you need to correctly calculate the mounting height and the distance between the plates, the plates must be on the same level. If you install the plates incorrectly, then the heating radiator may be installed crookedly, or it may simply not go into the grooves. After this operation, you just need to put the radiator on the mounting plates. We remind you that the distance from the finished floor to the radiator and from the radiator to the window sill should be in the range from 10 to 13 cm above and below. The main thing is not to completely remove the protective film, as it will help keep your heater in perfect condition until the repair is completed. But the installation of radiators does not end there. Install a THERM X2 separating plug on the return. This plug does not allow the cooled coolant to be in the heating battery and removes it from the radiator.
Now we will connect the radiator to the heating system. To do this, you will need two valves, one to supply fluid to the battery and one to drain fluid from the battery. Let's start with the intake valve. Connection dimensions ½, external thread... Please note that for the convenience of installing and replacing heating batteries, this valve must be with an "American". We separate the valve from the American, screw the valve onto the heating pipe, then screw the American into the battery. Then we connect the two elements of the inlet valve. Now we connect the check valve. The process is the same as for installing the inlet valve. The heater is then ready for use.
Installing the kermi separation plug
We place the assembly key in the dividing plug. Then visually make sure that the connection is correct. When the key handle is horizontal, the plug must be in a vertical position. We install the plug in the heating radiator. To do this, we bring the plug to the battery, pay attention to the arrow on the key (the arrow should point to the back plate of the heating battery). We insert the dividing plug into the connecting thread of the radiator. For convenience, you can slightly squeeze the plug and, moving it back and forth, insert it until it stops. Remove the assembly key. Connect the heating batteries.
Replacing radiators with bottom connection
Replacing the batteries is also straightforward. You just need to shut off the coolant supply to the heating radiator at the inlet and return valves, unscrew the American, after which you just need to pull it off the mounting plates, and you can replace it.
Conclusion
Now we know that you can buy heating radiators anywhere and you can install heating batteries yourself, and replacing heating batteries does not pose any problems, given that the installation was performed correctly and using suitable shut-off valves.
Reliability - this is the quality that consumers are interested in when choosing heating radiators for a house or apartment.
German-made Kermi steel panel radiators are associated with this very concept, and, despite the rather high cost in comparison with similar devices, they are in constant demand, both in the domestic market and abroad.
About the brand
Kermi is famous manufacturer steel radiators from the German city of Platling. He has long established himself in this niche and still pays a lot of attention to the development and implementation of the latest technologies.
Although opinions are completely contradictory about most panel radiators, Kermi steel radiators are recognized as powerful and reliable.
This is due to the fact that their production is monitored at all stages:
- Selection of material for the manufacture of panels.
- Manufacturing control.
- Checking each product for strength.
Panel radiators Kermi (steel) are presented in a wide lineup products different color, size and design.
Steel panel radiator Kermi
At the heart of any panel radiator are steel plates connected by a rootstock. They are made by stamping, in which on inside the panels are extruded with special channels for the coolant. Two of them are horizontal and located at the top and bottom of the steel stamping, and the rest are vertical.
The steel panels connected in pairs subsequently become the base of the batteries. Depending on the required level of heat transfer from the device, Kermi steel heating radiators consist of one, two or three rows of panels.
For more efficient operation, convectors are built into them, which are corrugated sheets of thin steel.
The entire structure is covered with side and top covers, giving the product a neat and stylish look. The difference in the structure of Kermi radiators is the supply of the carrier, which does not fall simultaneously on all panels, as in similar products from other manufacturers, but sequentially.
This means that the front panel heats up first, while the second and third (depending on the model) are cooler. This maximizes the efficiency of the radiator by heating the room 25% faster, and the heat is not wasted on heating the wall.
This technology is labeled Therm-X2 and has proven itself even in low temperature applications. This has significantly expanded their scope, and Kermi panel heating radiators are perfectly combined with solar collectors and pumps of any power.
Another design feature of Kermi products is balanced control devices. which have been tested by the manufacturer over many years of testing. They allow you to create any comfortable conditions and, at the same time, save fuel consumption.
In the design of the products of this company there are models with both side and bottom connections, and the latter can have wiring not only on the left and right, as is usually the case, but also in the middle.
The lineup
Although the company adheres to the parameters of panel radiators, it has products with a smooth front surface, called Plan, and with a profile, slightly wavy - Profi.
If steel radiators Kermi are marked Plan (Fko), then these are products with a smooth panel and bottom connection, made in 3 versions: right, left and middle.
Plan FKV models has a side connection and is presented not only by the main dimensions, but also by the fact that it is suitable for replacing old ones cast iron batteries... This will save you time and money as you don't have to redo your eyeliner.
For medical institutions and allergy sufferers who are contraindicated in the accumulation of dust, it is suitable hygiene model Plan-V, in which the distance is observed, allowing easy removal of dust from the surface of the radiator.
All Kermi steel panel heating radiators are made in standard types 10, 11, 21, 22, 33, where the first number indicates the number of panels, and the second - about convectors.
Read about the technical characteristics of Kermi steel radiators below.
Specifications
The data sheet for the product is the main document by which the consumer determines how much power he needs the device.
Steel heating radiators Kermi does not bypass this, specifications which have the following parameters:
- The main working pressure is 10 Bar with a test pressure of 13 Bar.
- The maximum permissible water temperature in the system is +110 degrees, and the operating temperature is +95.
- The height of the products varies from 300 mm to 900 mm.
- Length - from 400 to 3000 mm.
- The depth of the product depends on its type. So for models 10 and 11 it is 61 mm, for 12 - 64 mm, for 22 - 100 mm, and for 33 types - 155 mm.
According to the connection method, the entire model range of this brand is divided into side and bottom connections, the latter being provided in valve devices that are labeled with the Latin letter V. At the side connection, which is used in compact devices, the letter K is present in the marking.
Installation and maintenance features
Each steel radiator Kermi (Fko or FKV, it does not matter) is equipped by the manufacturer with a special dividing plug, which must be correctly installed after the device is installed. It is she who separates the coolant, ensuring the sequence of connecting the panels.
If carried out bottom connection according to the "Leningrad" principle, the cork is not mounted and the Therm-X2 effect will not work.
In the event that old heating devices are replaced with Kermi steel radiators, special adapters will be required that adjust the distance between the pipes.
Like other species heating devices, Kermi brand radiators need regular cleaning. As a rule, they are equipped with lids that tightly seal the inside of the device. They can be removed using a "key", which is the company's logo, made on a plastic plate. It needs to be pulled back slightly so as not to scratch the paint and turned counterclockwise until it comes off. After removing it, you can remove the sides and cover and start cleaning the radiator.
Steel radiator Kermi bottom connection - diagram (pdf):
V Lately it became popular to change metal pipes for polypropylene. Panel strapping steel radiator Kermi polypropylene is a good addition to a quality device.
These pipes are capable of withstanding pressures up to 25 bar and have a long service life of up to 40 years. If the strapping is made using the soldering method using a special device, then the service life of the radiators can be significantly increased.
Summing up, we can say that Kermi steel panel radiators are one of the highest quality, reliable and powerful heating devices made of this material on the domestic market. Their only drawback is the high price, which is fully compensated by the long battery life.