Application of decorative paint. Effect paint, textured, interior or decorative Decorative paint technique

Renovation today is not what it was in the 90s, when everyone used the same finishing materials in their apartments.

Stores today abound in goods of all kinds and tastes. Hundreds of kinds of paints, wallpapers, plasters, etc.

Today, many are trying to avoid all sorts of cliches and repetitions, making their interiors as original and unique as possible.

In this article, we will talk about decorative wall painting.

Preparing the walls

It's no secret that the walls must be prepared regardless of the type of finish. But it is worth saying that in the case of painting, the walls need to be prepared the best. Often it is the smoothness and evenness of the walls that is the formula for success. All flaws are visible under the paint, so carefully examine the walls.

Plaster. The walls must be plastered, creating a base for putty work.
Putty. The walls are puttyed with a thin layer, after which they are cleaned to a smooth state.
Primer. All gaps between plaster, putty and finishing must be primed. The primer provides good adhesion of materials.

Which paint to choose

To choose a paint, it is advisable to understand the following about it:

How quickly the paint dries.
Does the paint smell too defiant?
Whether the paint consumption corresponds to that indicated on the package.

You can paint the walls decoratively in the following ways

Combining several common colors, but different colors.
By choosing a special decorative paint and applying it in a specific way.

If you choose the first method, then as a rule you will have a fairly liquid paint, which you need to apply with a molar roller. In some cases, a spray bottle is used that allows you to evenly apply paint to every centimeter of your walls. However, in most cases, an ordinary roller is still used.

You should pay attention to how you apply the paint. It is better to do this with uniform movements and the same on all wall surfaces. This ensures that the paint will adhere equally to all areas of the walls.

It is necessary to paint the walls in several layers. Each subsequent one is applied to the dried previous one.

Use of decor

You can decorate your walls with specially purchased or self-made stencils.

A stencil can be made from any thick paper by cutting out the pattern you need on it.

This will give your walls uniqueness and beauty.

Splash effect

We will recommend an interesting and easy-to-use effect. A hard brush is taken, dipped in paint of a color other than the wall, after which the brush is squeezed out and after that, bending back the brush villi, the paint is sprayed onto some areas of the previously painted and dried wall.

Contrast staining

An excellent effect is achieved with the use of contrasting colors. For example, you combine cinnamon and pale burgundy, etc. If you are not deprived of imagination, then you can come up with interesting interiors.

other methods

There are a lot of options to give your walls an interesting look. You can wrap pieces of fabric of different lengths on a roller and paint separate sections of the walls with such rollers. You can think of anything you want, do not be afraid to experiment.

You can also use decorative paint. However, to apply it, you need to learn some technological principles. For example, to make the walls silky, use silk paint.

Apply it in one go and let it dry.
After using a sponge, saturate the walls with a second layer, thereby forming a texture.
Next, you need to wait 20 minutes until the paint dries a little.
Take a wallpaper spatula and smooth out the paint with random movements.

An interesting effect will turn out!

conclusions

Thus, we examined the topic of decorative painting of walls. Most importantly, don't be afraid to experiment! And if experimenting is not your option, then hire designers and decorators to help create your unique paradise.

Good luck with your repair business!

Is it possible to do decorative painting of walls with your own hands? Of course, this is a completely affordable way to update and decorate the interior in all respects. To accomplish this task, almost any paints and varnishes, intended for interior decoration premises.

There are also many ways, and new ones appear almost every day. And tools for decorating can be purchased at a building supermarket or built from improvised means.

Paint roller

Wall decor is most often done using this particular tool. The effect obtained when painting depends on which nozzle is used in the work. A decorating nozzle is made from different materials:

sponge, foam rubber,
artificial or natural fur,
rubber-based materials,
plastic, cellophane
different types fabrics.

Standard Option

A roller is a very simple tool, consisting of a handle, a cylinder that can be changed into different "fur coats", and a holder made of metal. Often, for convenience, the paint roller is additionally equipped with a telescopic handle; this device makes it possible to paint ceilings and upper sections of walls without climbing a ladder.

Zoning by shade

The easiest way to decorate is to create a series of solid colored surfaces. Zoning (dividing the surface when painting into areas of different colors) is carried out using masking tape, which allows you to make the boundaries between zones perfectly even.

Making patterns with a roller

To apply a pattern to walls or ceilings, paint the walls with a patterned roller. The special nozzle leaves a colored impression on the surface. To apply an ornament efficiently, you need at least a little experience. It is quite possible to master this skill in a short time, which will allow you to combine different types of paint, combine nozzles of various configurations in the work and carry out rather complex design solutions.

How to apply a pattern with a pattern roller. Video

"Author's" tool

Rollers for decorative painting of walls can be equipped with textured devices of our own production. The options are:

tightly wrap the cylinder with a thick textured rope;
tie together several long pieces of fabric of different density and tie the cylinder of the roller with the resulting blank so that the nodules "look" outward;
An unusual figured print can be created by simply sewing pieces of sponge or foam rubber, hard and soft fur, braids, as well as fragments of other materials, the use of which will seem interesting, to an ordinary "fur coat".

Important: all this "constructor" must be fixed in such a way that its parts do not create splashes, that is, the presence of too long or bulky elements is undesirable. The surface of the roller, despite the texture, should be more or less uniform so that no streaks or gaps form on the painted wall.

Such bold experiments often lead to remarkable results, but before painting the main wall, it is better to test the resulting tool on a piece of cardboard or plywood to ensure the quality of the print.

Painting process

To decorate the walls with a curly coating, you will have to use at least two shades of decorative paint: the base one and the one that is applied directly to the ornament itself.

You can make the main painting in a darker tone, and put a pattern on top light color, or vice versa. The main thing is to observe the relative contrast so that the shades do not merge. Coloring is carried out as follows:

The surface is carefully prepared, that is, cleaned and leveled, if necessary (in any case, it must be perfectly clean and even). To solve the last problem, ordinary and finishing putties, as well as sandpaper, are used.
The walls are treated with a primer to create strong adhesion (adhesion of the coloring material to the surface), as well as to make the decorative coating more economical.
A base coat of paint is applied to a completely dry base. At the beginning of this stage, you will have to work with a brush to paint over the joints, corners and other hard-to-reach places, bypass sockets and switches. The remaining area is treated with a roller, moving from top to bottom, and alternating vertical and horizontal movements in order to thoroughly paint over the entire surface.
When the first layer is completely dry, they begin the most interesting thing - working with a curly nozzle. A steady hand is important here, because you need to act carefully and accurately. With some practice, you can be sure of success. The roller is rolled from top to bottom, meticulously combining each new strip with the previous one (there should be no overlaps).

Sometimes the resulting dried surface is also treated with a transparent varnish to give the coating strength and extend its service life.

Working with a pattern roller on textured paint. Video

Alternative methods of decorative painting

In addition to working with a paint roller, there are other methods of creating beautiful patterns on the surface. For this, various devices are used and decorative compositions.

Stencils

In stores specializing in the sale of finishing materials, you can always purchase stencils, with which it is very easy to apply a pattern of any complexity to the walls. To implement your own ideas, you can make this device yourself. It will take suitable material, for example:

a sheet of thin plastic,
dense polyethylene film,
rubber-based material.

Important: the stencil must have good moisture-resistant properties, otherwise the pattern will turn out to be blurry due to soggy edges.

An invented ornament is drawn with a pencil or bright crayon on a clean piece of the selected material, and unnecessary pieces are carefully cut out using scissors with thin tips. The resulting stencil needs to be tested to make sure that the picture is of good quality and to eliminate possible errors.

Working with a stencil

The device is applied to a pre-painted in a base tone and dried surface, securely fixed (this work is well done in tandem with an assistant who will press the stencil against the wall). Paint roller or paint over its surface with a brush.

The crucial moment: detaching the matrix from the base. This must be done quickly and carefully in order to prevent smearing of the still damp paint.

Thus, the entire wall or its individual sections are processed in accordance with the creative idea.

An example of drawing a picture through a stencil. Video

Unusual coloring compositions

Market building materials offers the modern consumer a wide range of paints and varnishes:

fluorescent paints glowing in ultraviolet light,
luminescent compounds that absorb and accumulate daylight to give it back in the dark,
coverings with the effect of velvet, mother-of-pearl, brocade and marble,
paints with fillers in the form of small pebbles or natural shell chips, multi-colored glitter and flakes.

A surface painted with one of these materials looks very stylish and unusual. These coatings can last for up to 10 years.

You can paint the walls decoratively using very unusual methods. For example, use the following materials as a drawing tool:

a piece of foam rubber or a sponge,
a crumpled piece of tissue
crumpled sheet of paper.

These simple devices are simply dipped into the dye composition, its excess is removed and an arbitrary pattern is “printed” on the surface over the previously applied and dried base tone. The resulting pattern creates the effect of the texture of the coating, imitation of marble or natural porous stone, coral walls and, in general, gives a result that is not only no worse, and sometimes even more interesting than rollers for decorative painting of walls.

One of the solutions to create original interior is also decorative paint for walls, the types of which are many, and its combination with unusual methods of application is a fascinating and generally not financially burdensome creative process, but it will take time and imagination.

Are you tired of your monotonous interior in your apartment? Do you want to transform it, refresh it and create something extraordinary? To your delight, there are many options for decorating a living space. One of them is quite effective - this is a decorative painting of the walls with your own hands. Thanks to her, you can change the design of your home beyond recognition. There are many techniques through which you can create unique patterns and textures on the walls.

It is clear that it is difficult to call the process easy. But if there is the appropriate instruction, tools and materials, as well as the correct attitude to work, then it will be possible to do without specialists. Let's find out how you can paint your walls in a decorative way with your own hands.

Features of decorative painting for walls

What is the difference between ordinary wall painting and decorative painting? The differences are quite tangible. Regular painting will simply transform your wall into a different color. And if we talk about decorative painting, then a unique pattern, structure and shape are created on the surface, along with coloring. Let's take a look at the benefits that decorative wall painting has.

Advantages of paint:

As you can see, there are a lot of advantages of the material. But, it also has its drawbacks. There are very few of them, but they are:

walls for painting with your own hands will need to be carefully prepared. Further we will take a closer look at what is included in such training;
when compared with ordinary paint, the price of decorative compositions is slightly higher. Sometimes you will see a price tag of about 1000 rubles per 1 kg of material. Although there are cheap options, for 300-400 rubles, they are not of such high quality.

If we figured out the description of decorative paint, let's look at the technology of work in order to change your house or apartment beyond recognition.

Stage 1 - preparatory work

As you already understood, there is nowhere without this process. It is clear that any finish requires quality training... Therefore, you should not think that you will be doing unnecessary work. If you neglect this, then the service life and quality of the finished surface will be low. What is included in the preparation of walls for painting?

First, you need to assess the condition of the walls. How smooth are they? Are there cracks, pits, or other defects? Are there old finishing materials on them? All this will need to be fixed. Remove the old finish to the ground, it will only get in the way. Cracks and defects can be repaired. You will need a putty for this purpose. It can hide all defects.

In the event that the wall drops are more than 20 mm, you need to putty the walls for painting in order to level the surface. Indeed, as a result, all the irregularities will be clearly visible. All you need is to buy a putty, stock up with spatulas, a rule and a level. Thanks to them, you can achieve a perfectly flat surface. For more information on how to putty walls for painting, see this video.

Advice! Immediately before painting, you should treat the surface with a primer that will provide the best adhesion.

In the event that you work in a room with all the decor elements and furniture, protect them or remove them altogether for the duration of the work.

Stage 2 - apply a decorative layer of paint

All you need for the work is the selected paint and tools for shaping textures and patterns. Rollers for decorative painting of walls are very good. Thanks to its shape and unusual roller, original drawings and patterns are obtained. But, you can use a brush, sponge, rag, nap roller. It all depends on the application technique, of which there are quite a few. Let's take a look at the common options.

Dry brush method

First, apply the paint evenly to the wall using a regular roller. Please note that the tone of the paint should be lighter. Wait until the layer is completely dry. Then, with chaotic movements, using a brush, cover individual parts of the walls with paint with a different shade. For example, you can use metallic paint, gold, bronze or silver. The result of the work can be seen in the photo below.

Rubbing paint method

The job is pretty simple, you can handle it yourself. It is enough to apply the composition to the wall, then rub it with a special mitten or sponge. This will create an interesting pattern and soften the color contrast.

We imitate Venetian plaster

You need two shades of paint here. Divide it in two, add dark dye to one of them. Everything is ready to go. Apply paint in layers, alternately changing colors. It remains to shade the finished coating to make everything more harmonious. Use a spatula that needs to be passed along the wall from one side to the other.

Using a rag roller

Thanks to this method, you can not only get an interesting range and pattern, but also hide defects in the surface of the walls. The work is simple: apply decorative paint of a specific color to the wall. Take a rag, make a roller out of it, twisting it into a tourniquet. Lightly dip your homemade roller in a different color of paint, and then begin to form patterns on the surface.

Note! To obtain a harmonious color, alternate the direction of travel and rotate the roller at different angles.

Using textured rollers

One of the popular options is the use of a textured roller. It has a patterned rubber surface. All that is required of you is to apply paint to the walls, and then process it with one of these rollers. The pattern will be painted in a different color. These photos show how the finished result will look.

Decorative painting walls - one of the most popular types of finishes. It is very diverse, individual, with its help you can create a unique beautiful room, which will not have an analogue. At the present time, this type of wall decoration, such as decorative painting, has become a strong competitor to conventional wallpaper.

Dyes for wall decor, as a species finishing material, is characterized by many advantages:

The service life of painted coatings is a couple of times higher than that of wallpaper or plaster.
There are no joints on the painted surface, resulting in a perfect continuous picture.
Huge assortment of different colors and effects.
Moisture-resistant properties help to make the walls unique, even in the kitchen and bathroom.
In case of repainting, the existing paint layer does not need to be cleaned.
The use of water-based paint for decorating guarantees an environmentally friendly surface that does not emit toxic substances and does not cause allergies, is an ideal solution for decorating a children's bedroom.
Regardless of the basis of the surface (be it concrete, drywall, plaster), it fits equally well on the wall.

Decorative painting of walls has only one requirement for the coating - it must be even.

Painting tools

Painting the walls in the apartment, in addition to the paint itself, is carried out using the following tools:

roller;
spatulas (metal, plastic, notched, rubber);
sponges;
hard brush;
sandpaper;
stencil (for the effect of a picture on a painted wall).

Before you start wall decor, you need to decide which decorative effect I want to get it so as not to buy an extra tool. Although the price of rollers and brushes is low, they can be used more than once.

Preparing the walls

If decorating the wall with paint for the first time, you need to prepare the surface for such design solution... Preparation of walls for primary painting is carried out in stages:

Cleaning the coating from the old finish.
Surface priming.
Inspection for flaws, which are repaired if necessary.
Uneven surfaces are putty and sanded.
Reprocessing with a primer.

Related article: Choice of wall filler and leveling steps

After all the work done, the wall is ready for decorative painting.

In order for the paint to lay on the walls evenly, and there were no defects on the coating, it is necessary to wait until the putty mixture and primer on the wall dry completely.

Types of wall decoration with paint

Due to the fact that decorative paint is too expensive, an alternative is in demand by construction professionals - artistic painting of walls with ordinary cheap paint. There are several ways to create a unique space using ordinary paints. Let's consider them in more detail.

This is the name of painting the walls with decorative paint, which creates the effect of an old shabby surface. To create such a masterpiece, you must:

Cover the surface with the selected color.
Apply acrylic paint to create a contrasting shade.
Apply colored glaze to the surface in combination with the shade of the painted wall, smooth it evenly over the plane with a wide brush, and when all surfaces are covered with glaze, touch the uncured paint with the same brush.
With a round paintbrush, you need to poke randomly over the surface, thus making the walls look antique.

This method of application has only one drawback: all irregularities and bulges become more noticeable.

This decorative painting is a great idea for decorating an office, it gives the impression that the walls are covered with leather. After preparing the surface, you need to start finishing:

We cover the walls with latex paint of our favorite color.
Making a suede brush.
Mix the glaze with latex paint, slightly darker than the surface tone.
We cover a piece of the surface with the mixture, moisten the suede brush in water and wring it out, with light touches we apply it over the not dried coating, making stains, and partially removing it.
Blot any visible lines with a piece of wet suede to give the leather a natural look.

Venetian plaster effect

One of the most beautiful and decorative ways to paint walls. To recreate the Venetian effect, you must perform the following stages of work:

Place latex paint in a wide container. Sprinkle a little pigment for paint on one side, gently stir half with a stick so that the dark and light side comes out in the container.
We take a lighter paint on a spatula and apply it to the coating like ordinary plaster.
Dip the spatula in dark color and cover a piece of the wall.
When light and dark spots appear on the wall, we begin to drive the spatula along the wall in different directions in order to evenly smear the colors for a harmonious look.

Related article: Features of painting an old refrigerator

At the final stage, the Venetian plaster is sanded with fine emery paper and rubbed with a special wax compound.

To create the "Venetian plaster" effect, only a plastic spatula should be used during work.

Wrinkled skin effect

This effect is simple to create, but it takes patience, because everything is done slowly, gradually.

We take a piece of paper, paint a piece of the wall according to its size.
We crumple the sheet, apply it to the surface, begin to smooth it, while creating the outlines of the crumpled coating.

The entire wall is gradually processed in small pieces.

On the video: the effect of crumpled (shabby) leather on the wall.

For decorative painting of walls, you can use not only purchased tools, but also available tools. A regular rag roller creates an interesting indoor effect that is suitable for children's rooms. In case of application this method surface preparation may not be ideal, because this type of finish hides all the imperfections on the wall.

Roller painting steps:

Apply the first coat of paint, wait for it to dry.
Dilute another shade of the base color (slightly darker than the previous one).
We moisten a rag in the paint, twist it to make a tourniquet, wrap a roller with it.
Paint from the very top of the wall to the bottom in different directions to get a textured pattern.

Types of paints

Wall decoration with special dyes for wall decoration is a diverse material. They have many color tones and look beautiful. Types of decorative paint differ in properties based on the composition.

The components of the composition of the paint are divided:

acrylic;
latex;
water-based;
alkyd and oil.

Acrylic paints

They are most often used for painting walls in an apartment. They are popular due to their value for money. They have the following properties:

fireproof;
make walls strong and durable;
resistant to temperature changes;
dry quickly, create protective film on the walls;
adhere well to the coating;
environmentally friendly;
have an assortment of more than a thousand.

Latex paints

lack of a pungent odor;
high degree of fire safety;
the paint does not react to a sharp change in air temperature;
dilution with plain water is possible;
dries quickly after application;
resistance to abrasion;
environmental Safety.

In addition to positive qualities, there are also negative ones. The color scheme of this type of paint does not have bright colors, and under the resulting film are created good conditions for the residence of biological organisms. Prime the surface well before using the latex stain.

Related article: Types of primers and surface preparation for painting

Water-based paints

They are in demand for painting rooms without creating an interior, their price is low, and they cope with the direct purpose of painting surfaces. The advantages of water emulsion include:

low cost of material in the construction market;
low consumption during application;
harmlessness to health;
have good moisture permeability.

Among the disadvantages of a water-based coating, experts distinguish the speed of washing off the coating, as well as the need for a certain temperature in the room during painting.

Alkyd and oil paints

Alkyd and oil based dyes are characterized by a rich finish color, a durable layer. Positive qualities these types of finishes are:

rich beautiful colors;
very durable layer when dry;
long service life.

Negative qualities are also present: it is a very pungent smell during painting, a large consumption of material, high cost, a small assortment of colors.

In order to save money, many want to paint the walls with their own hands, without the help of professionals. But how do you apply decorative paint yourself? There are some recommendations of experts regarding the application of decorative paints to walls:

Before painting the surface, it must be primed to avoid the appearance of mold.
Prepare the room by covering the floor with protective film.
Stir the paint well after opening it.
When using a brush, apply horizontal stripes and then smudge them vertically.
If you use a roller, you need to roll it along the tray with the material, then - from top to bottom, then cover the walls with paint, pressing the tool well (for a uniform color).

In order for the coating to turn out to be evenly colored, you must first apply a layer with a brush, and then go over the painted surface with a roller. If desired, you can apply a variety of decorative staining methods.

Do-it-yourself decorative painting of walls is a very real task. The main thing is to adhere to the instructions for using the material along with the recommendations for application.

Learning to paint surfaces decoratively (2 videos)

Various decorative painting effects (28 photos)

Every day, wall painting is becoming more and more popular, displacing the wallpaper we are used to. Do-it-yourself decorative painting of walls in an apartment will make it possible to change your interior beyond recognition, making it refined and unique. Thanks to various repair tools, the surface can be made both smooth with a velvet effect and with a variety of textures.

So, with the help of improvised means on the surface of the walls, you can imitate wrinkled skin, create the effect Venetian plaster, artificially age the coating. For decorating walls in specialized stores there is a huge selection of paintwork materials. Depending on the component composition, there are paints: water-based, alkyd and silicate.

Water based paints

Today, water-based formulations are most often used. Due to their positive properties, they are used much more often than other types. So, among the compositions on a water basis, emulsion and disperse are distinguished. Among them are the following types:

Water-based;
Silicone;
Acrylic;
Latex.

The main advantages of such paints are as follows:

Do not have a pungent smell during repair and after drying;
Dry quickly;
The ability to make absolutely any color and shade;
Easy to use;
Vapor permeable.

This type of material is distinguished by its versatility. Special components make it resistant to mechanical stress and abrasion. Due to different fillers, such as quartz or marble chips, it is possible to achieve different surface textures: imitation of sand, silk or glossy shine.

Water-based paints

Such coloring compositions are the most affordable. This makes them the most widely used. The main condition for using these materials is painting walls that do not come into contact with water and do not give in to friction. It can be applied to plaster, putty and paintable wallpaper. This mixture is sold colorless, and the desired color can be made using pigments.

Silicone paints

Silicone based paints are water-dispersed. They have a number of advantages and are practically universal. Silicone formulations have excellent hiding power. The paint, applied in two layers, is even able to hide small cracks on the surface. After painting, a smooth film forms on the surface, which protects the walls from abrasion; makes them practically waterproof.

Acrylic compounds

Today, the leading positions among paintwork materials are occupied by acrylic paints. They are used for painting surfaces made of any materials: wood, brick, drywall, concrete. The color range of these compositions is striking in its variety. Using acrylic paints, the surface can be made glossy, matte or pearlescent. They differ in that they dry quickly, practically do not have a pungent odor, and are relatively resistant to moisture. All these characteristics make it possible to use acrylic-based paints and varnishes for children's rooms, hallways, bathrooms.

Decorative painting of walls (video)

Latex coloring materials

The most expensive water-based paint is a latex-based composition. The high price is explained by the excellent characteristics possessed by this type of paintwork materials. Their main advantage is the absolute water resistance of the treated surface. Therefore, latex paints are used for wet rooms: kitchens, bathrooms and shower rooms. With their help, you can mask small defects and cracks. Among the shortcomings can be called the fact that it burns out quickly.

Alkyd compounds

The solvent for such paints is gasoline, turpentine, white spirit. Therefore, staining is accompanied by strong smell a solvent that is highly toxic. Thanks to alkyd resins, the paint is easy to apply, very durable after drying, resistant to sunlight and temperature extremes. But at the same time it differs not in a long service life - it quickly fades, acquiring a yellow coating.

Silicate compounds

In paints based on silicates, the main component is the so-called " liquid glass". This composition makes the surface particularly durable. In terms of vapor permeability, silicate paints are in first place among other types of paintwork materials. Special additives prevent the appearance of mold and mildew, so the painted surface is not afraid of high humidity.

Preparation for painting

Do-it-yourself decorative painting of walls is a simple process, but it still has its own secrets and characteristics. Therefore, the first stage of our work will be preparation the necessary tool... So, for coloring we need:

Container for paint;
Rollers;
Cysts of different sizes;
Foam sponges;
Rags.
Gloves.

The next stage is the preparation of the walls for painting. Perhaps the main condition for decorating with paint is the absolute evenness of the surface. So, in the presence of large cracks and irregularities, you first need to putty and prime them. And only after the solution has completely dried, start applying paint.

We create a decorative coating with our own hands

There are many unusual ways applying decorative paint to the walls with your own hands. To create drawings on the wall, you can use various stencils that are on sale in stores, or you can do it yourself by cutting out any patterns on a sheet of cardboard. To paint in this way, apply the main tone of the paint to the wall. And after it dries, we apply the stencil to the wall and paint with either an aerosol or rollers and a brush.

One way to add sophistication and luxury to your home is to paint the walls with a Venetian plaster effect. For this finishing option, in addition to basic shades, you will need mother of pearl. This pigment can be purchased at paint shops.

For this decorating method, apply a base color as a base, followed by a second shade. Better to use latex paint. Then, using a plastic spatula, we make chaotic stains, thus, as if mixing the two shades.

For wall decoration, say, a study, or you are a follower business style in the interior, you can create a coating that imitates natural leather. For this, beige or light brown latex paint, glaze and a shade darker than the main one are suitable.

Apply the basic tone to the wall. Then mix the glaze and a darker shade and use a damp suede brush to apply the resulting composition to the coating, making small stains.

A piece of paper will help us achieve the effect of crumpled skin. It needs to be rolled up and crumpled. Then we apply it to the painted wall and smooth it, thereby making careless drawings on the paint.
Now on sale we can find a large selection of textured rollers with various patterns on the working surface. In order not to spend money on these devices, we will make such a tool ourselves. We wind a piece of fabric on the roller and fix it. We use two or more paintwork shades. This way we simulate structural plaster.
To create the effect of a coating that has aged from time to time will help us acrylic paint, glaze, wide brush and brush. Apply the glaze to the surface painted with the base, smoothing it with a brush. Then, with the help of a brush, we make chaotic strokes over the entire surface.

Did you like the article? Share it

Print article