How to close the gap on the leather jacket. How to restore a torn leather jacket at home

Jackets made of leather are an integral part of the wardrobe of any person. They are very practical and durable. But still, sometimes absurdity happens - you hooked for the carnations or embarrassed hand in my pocket, and the question arises - how to fuck leather jacket at home? Of course, numerous ateliers offer various services for the repair of clothing. But if this option seems to you too expensive, we suggest to cope with the problem on your own, especially since it is not very difficult.

What do you need to repair a leather jacket?

Prepare necessary materials and tools:

• Glue for working with leather and cloth. Use the "moment" or any shoe glue. What makes it better for you at a price, read in our special article.

Important! Cannot use PVA and super glue.

• A piece of thin skin or suede. Pick out the material of the same color as your favorite product. The size of the patch should be more torn place or cut 2 centimeters on each side.

Important! If the hole or a cut of a small size, then put an old leather or suede glove on the poppip.

• Sharp small scissors.
• Solvent for degreasing.
• Hard tassel.
• Couple toothpicks.

Important! You may need a heavy item to prescribe a bonded place while you will cope with the problem, how to make a leather jacket. All work is best done in a well-lit and, preferably, ventilated place.

How rushes the skin on the jacket?

The most common types of damage are:

1. Spray "Corner"
2. Spit slice.

Important! Methods of liquidation of the break in each of these situations will be different. Check carefully with them to make the result of the problem, how to make a leather jacket at homewas very high quality.

Step-by-step manual for repair of a leather jacket - Situation number 1

If you broke the material to the corner, then stick to the next order of work to fix the leather jacket.

Step 1

1. Remove the leather jacket on the wrong one.
2. On the lining of one of the sleeves, find the firmware of the seam and write it down.
3. Put the jacket on a flat, well-lit surface (for example, a kitchen table).
4. Looking at the inside, get to the place of breaking from the wrong side.

Step 2.

Torn space is well treated with solvent to degrease.

Step 3.

Prepare a piece of leather or tissue patch. The size of the loskutka should be larger than the gap area by 1.5-2 cm on each side.

Step 4.

1. Melt the glue surface of the patch.
2. Clean the tassel or cotton wand with glue around the place of the break.
3. Do not gap yourself.
4. Let it dry with glue for 20-30 minutes (see the application of glue use).

Step 5.

1. Apply another thin layer of glue.
2. Wait until it gets up.

Step 6.

1. Gently glue one side of the break.
2. Align the edges and glue the piping on the cut completely.
3. Press the place of connection of the torn area well.

Important! The greater the junction, the smaller the seam will be noticeable.

Step 7.

1. Remove the jacket.
2. Bend the skin along the rupture line so that the place of the edge connection has been separated.
3. The tight of the toothpicks gently apply a little glue between the edges of the rupture.
4. Slimming them.

Step 8.

1. Cross the jacket on the table.
2. Prescribe a bonded burden for a day.

Step 9.

If necessary, tinted the cream-paint gluing line.

Step 10.

Sewing lining.

Important! If the seam is still noticeable, but the jacket is already a whole, you can additionally decorate this place and several more areas of the product, thereby giving original design things. Choose more convenient and interesting to you in terms of decorative decoration An option from the proposed in our separate publication.

Step-by-step instructions for the repair of a leather jacket - Situation number 2

If you snapped a piece of skin, then follow the instructions below, to easily stick a leather jacket at home with your own hands.

Important! To work, you will need, in addition to the above-mentioned funds, tape and tweezers.

Your actions:

1. Pinzeta gently insert the escaped piece into the hole and creek the scotch.
2. Remove the jacket to the wrong one and get to the place of gap from the wrong side, as in the previous case (steps 1, 2, 3).
3. The prepared piece of fabric is not attached to the junction, but on a piece of leather.
4. While the fabric was not glued, you can move it, so reflect the neat jacket and remove the tape. To correct the patch, press it, and leave to dry.
5. Sewing lining.

Important! If you did everything right, the place of the gap will be absolutely unnoticed.

Important! If you could not carefully take a jacket, find out , and not just a leather.

1. Before using the sticky tape, make sure that it is not visible to the stickiness on the skin. Most things are currently painted with special films. In this situation, you can not take a leather jacket, and remove the surface layer of the dye.
2. Make sure you remember the instructions well before work, because during operation you must be concentrated on the goal and not distracted.
3. The glue should not dry earlier than you repaired the gap, as it will be difficult to apply the second layer of glue, and the quality of the connection will deteriorate.
4. To sew the lining, use a needle designed to sew the skin. Otherwise, you can damage the machine, and your clothes.
5. If you are confused that the wave will be visible, then use designer solution - Sew a couple more skin pieces over the entire surface.
6. If the glue hit during operation outside the hole, then carefully remove their tracks with a dry cloth. Itself moistening in no case cannot.
7. Before work, check the glue, tape does not leave traces on the material, and the paint perfectly passed the color of your product.

Important! In the future, carefully take care of the product so that you do not have to unschedule to spend money on the new thing. This will help you with our advice,

The skin is considered to be solid material. A good leather jacket is protected from rain, wind and for a long time will serve its owner / hostess. But sharp edges of items, a sharp unchecification of buttons can "injure" the product. Do not panic. The leather jacket can be repaired, and take the place of breaking with their own hands.

Materials and fixtures for repair:

• sharp scissors;
• tweezers;
• hard bruster for glue;
• special skin adhesive;
• leather patch that is suitable for color and slightly more from the size of the hole.

To repair the jacket brought a lot of trouble, and it did not have to carry it to the master with more serious damage, use several tips:

1. Use only special glue for skinning. It will dry longer, but will not make the place of repair of oak, like other adhesives. It is recommended to take transparent glue. The most suitable for sizing a leather jacket is a nipple, dysmocol or rubber glue. These substances are good and tightly grapped, dry pretty quickly. The listed types of glue are designed to repair products from leather and leatherette.
2. Before repairing the jackets carefully examine the instructions for the use of glue.
3. A leather jacket before ripping should be well dry and clean from dust.
4. Try to consolidate the place of the gap of scotch, the plaster. To do this, it is necessary to accurately fracture the lining of the jacket, from the wrong side to put the edges of the hole with a screwdriver. Thus, it will save from increasing damage.

At home, it is necessary to estimate the place of the gap, think over the subsequent operations of the process of repairing clothes.

1. Sharp scissors cut too damaged edges as well as threads. From the wrong side, to clean up the softer papers, the location of the damage to the patch.
2. For the edges of the holes are not shifted, they should be previously fixed from the front side of the scotch. Thus, not only more convenient to repair the jacket, but also leaves the damage is not as noticeable as possible.
3. The next step will be the preparation of the patch. Be sure to compare the size of the hole and a piece of the skin. The patch must be a little more. Its edges with an inside cut off with scissors or lure sandpaper. Next, we apply the layer of glue on the wrong side to be better held. Be sure to withstand the time specified in the instruction. Approximately it will take about half an hour.
4. Mark the place of gap on the jacket glue. It is best to use a brush that will evenly distribute the adhesive substance over the entire surface. To impose a flavion into place of the break, align all with tweezers and press over the entire perimeter with your fingers.
5. We proceed to the processing of the hole on the outside of the jacket. To begin with, carefully remove the sticky tape. Tweezers or toothpick a little replete rupture edges. A thin tassel put a little glue. Align the edges so that no damage can be seen, and press your fingers. Surplus glue remove rag. ATTENTION: The skin is not worth it too smoothing, since after drying it will be stretched and can break alongside the rebel. Also follow the bumps not formed, which will be too noticeable.
6. Leave a jacket for complete drying of glue. If the product is made of thick skin, then it should be placed for a while under the oppression.
7. The leather jacket can be given a second life with metal rivets, buttons, chains or colorful stripes. The thing will find a creative look and will differ from its "fellow".
8. A small hole can also be reapped by machine embroidery.
9. After eliminating damage, sew the lining of the jacket. Pick up the threads in the tone of the lining, take the seams are small.
10. When the glue is completely dry, the place of break, and the whole jacket paint the special paint for leather things.

To avoid further damage to the skin, systematically make it inspection. The most vulnerable places where the skin is usually wiping and rushes on the jacket - it is sleeves (in the area of \u200b\u200bthe elbow), pockets, buttons and loops.

If we noticed that the material became much thinner than in all the clothes, then in advance of the "weak place". Do not be used to repair a leather pay. It is enough with the wrong side to glue a piece of fabric.

In case there are more serious damage or you are not sure about your abilities, then it is better to take a leather jacket in the workshop. Master will select more suitable option For the repair of the product. It is possible that it will be necessary not only to glue a jacket, but to sew a new piece of material into place of damage. This operation is best done on a special sewing machine.

Video: Repair of leather damage

A thick and coarse leather jacket is very difficult to break. However, the soft and thin skin, from which a lightweight jacket is made or a spring jacket can be broken.

If you discovered a hole or cut on a leather jacket, first of all, creep the place of break from the inside the plaster. Then the material will not crawl further, and after that you can start restoring the product at a convenient time for you. In this article we learn how to make a leather jacket at home.

When you can sew a leather jacket

If the hole formed large, and resembles a broken piece of skin, better squeeze the jacket using sewing machine. To do this, turn out the product to the wrong side and the resurrection lining in place of the seam, then neatly and smoothly cut the edges of the opening.

Choose two pieces of fabric. One will be located on the inside and at the same time should go beyond the edges of the holes for two or three centimeters. For outside part Pick up an identical piece of fabric made of natural or artificial leather or from eco-leave, which is suitable for the color to the jacket and size to the cut.

Apply a fabric piece from the inside, leather - outside and sew on the typewriter. Choose a strong needle that is suitable for working with the skin. Otherwise spoil the product and sewing machine. You can not stitch, but take a hole on a leather jacket.

What you need to make a jacket

To close the hole on the skin, take the high-quality glue "moment" or rubber glue for shoes. The adhesive composition should be elastic and viscous, resistant to high temperatures Both water, oils and fat, must dry quickly.

Do not take the "superchalter" or pva. The first will not be able to glue the product for a long time. And the second after drying will leave a translucent film that spoal appearance clothes.

In addition, it takes sharp scissors and a rigid tassel, a suitable patch, paint, or cream for genuine leather or leather leather with suitable color. By the way, as a patch, it is convenient to use a piece of fabric from an old leather bag, wallet or gloves.

Also need toothpicks and solvent for degreasing material. As a rule, acetone, gasoline or special tool. Without treatment with solvent, the patch will not last long. Now consider how to glue the skin.

How to flick the skin with glue

• Remove the jacket on the wrong side, carefully remove the lining and process the edges of the cut on both sides by the solvent;
• Prepare a patch of genuine leather or leatherette, depending on the type of material from which the jacket is made;
• Introducing glue the poppip and the place of the ripping. Neatly and thoroughly smear the composition with a brush;
• Leave the composition for forty minutes and then apply a repeated layer. When it dries slightly, stick both parts to each other;
• To get a reliable result, first it is recommended to glue one side of the break, after which combine the edges and glue the patch completely;
• Put a solid object on the place of gluing and leave for five minutes;
• Remove the product back and bend the material so that the edges spread slightly. Apply glue to the edges of the fabric using toothpicks and slide so that they are as far back to each other;
• Spread clothes on smooth smooth surface and crush the material, press the glued place with a load and leave for a day;
• In conclusion, the skin is treated with cream or paint suitable color and lining.

Stuck the jacket with liquid skin

If a leather jacket has broken, liquid skin is often used. This is a modern and easy-to-use material that effectively eliminates defects and allows you to restore the skin. Damage on the jacket will be invisible! In addition, liquid skin does not harden twenty minutes, which allows you to correct the shortcomings and get the maximum result.

For work, in addition to the main material, you will need a bandage and a small spatula with an acute end and width around a centimeter. From the bandage, cut out a piece, a little bigger in size than the cut. The front side of the holes process liquid leather, which is applied by a spatula. Then on top tightly apply a prepared piece of bandage.

Pull the bandage completely, if necessary, lubricate the liquid skin. Leave to dry up for ten minutes, after which we again apply a layer of means. The knocked jacket leaves to dry for three hours. After work and drying, you can update the product in one of the ways below to restore the color and presentable appearance of the product.

How to restore leather jacket

For a leather jacket looks presentable after several years of socks or after repair, you can use a number of means to restore and update the material. You can refresh the product with the help of ammonia.

To do this, mix the soap solution with summer alcohol And wipe the material with a cotton disk or a napkin. A mixture of ammonia with white vinegar remove scratches and cracks on the skin.

After processing, wipe the product with a vaseline, glycerin or moisturizing hand cream. In addition, such means will restore the elasticity of the material. Spots on the skin remove flour, potato starch or purified gasoline. And the unpleasant smell will eliminate vinegar.

Be careful with leather products and do not wrap much, remove the lining and erase separately, and the surface of the clothing is simply wiped with wet wipes or a cloth with a soap solution.

Dry the product in a horizontal position in a well-ventilated room, away from electrical devices, batteries and sun rays. On the shoulders, raw skin is pulled out.

If the jacket fell under the rain, after drying, treat the skin with a solution of castor oil and one egg protein. If leather clothes began to stretch, treat the surface with wax, and then put in warm water for two or three minutes.

After that, decompose on the horizontal surface and leave up to dry. Detailed Leather Jacket Care Rules are found by reference.

Accidentally hooked for something beloved leather jacket? Or too sharp claws of your dog left a pass-through hole on it? Do not worry - everything is fixable. It can still be repaired, and, moreover, cope own forces And without serious costs.

To do this, you will need to find a wide, flat and well-lit surface (for example, dining table) and some items:

• transparent scotch;
• sharp knife;
• toothpick;
• small piece of fabric;
• skin paint;
• elastic glue on a water basis that leaves no stains (superclays do not fit);
• needle with thread.

Step 1.
With the help of fingers and toothpicks align the edges of the break with each other and secure them with a sticky ribbon. Before using the tape, stick it before on your hand, so that it is subsequently not left for unwanted traces on a leather jacket, and then on the gap on the skin.

Step 2.
Remove the jacket inside out through the seam, where the sleeves are sewn. If you do not see the factory seam, you can use a knife with which you need to make a neat incision. The incision should be large enough to get from the inside of the place that we repair.

Step 3.
Apply glue to a small piece of fabric and press it to inner side Holes where a thin layer of glue is already applied. Firmly press. When the glue is grabbing, you can turn the jacket back.

Step 4.
Gently remove the tape. Singing a drop of glue to cardboard or any other surface. Slightly pull the edges of the hole and apply glue between them with a toothpick. Get out the remnants of glue to the cloth and leave dry.

Step 5.
Sew lining, which you are up to this spacer.

Step 6.

Color the place of defect with special paint for the skin.

Tips and warnings:

• During work, try to focus as much as possible so as not to apply more harm to the jacket.
• Thus, leather jackets are repaired in most workshops, because it is one of the easiest ways.
• Re-read the instructions several times so that you do not distract while working.
• If you have begun to repair the process, then you must end the case to the end. If the glue dries, before you do all the requirements, all efforts will go to the pump. Re-applying glue is fraught with a damage of the appearance of the jacket.
• Most leather jackets are now stained with special films, so make sure that the sticky tape sticks on the skin, which is not visible.
• This method is suitable only if your leather jacket has minor damage. Otherwise, most likely it will be necessary to impose a piping of the skin of the same color, or another suitable.

Here is an uncomplicated way you can try to "reanimate" your favorite leather jacket.

How to make a leather jacket? This piece of clothing has almost every person. It became in demand primarily for practicality and durability. In addition, jackets made of leather, elegantly look and very convenient to use. However, even such a thing is easy to spoil by negligence. It is enough to randomly cling to the carnations or inactively shove your hand in your pocket - and a hole can appear on the leather product. At the same time, such absurdity can happen even with a new jacket. Do not dispose of it because of one flaw.

Skin clothing is very easy to fix. In this case, a torn place can be sealed by contacting this in a professional studio or recking on your strength. In this article and in the video we will look at last option And let's tell how to repair the product from the skin with your own hands.

We put a leather jacket at home

In order to fuck the torn leather jacket without a trace at home, it is necessary to prepare high-quality glue. In this case, the classic "moment" is well suited, since it remains plastic even after drying. Also for the repair of the skin, you can use any glue for shoes. Similar funds also have the necessary characteristics. But the superchalter or pva for the core of the cut or hole on the leather product is extremely recommended.This is due to the fact that the first substance is hard enough, which causes inconvenience during operation. PVA glue after herself leaves a noticeable white film, which as a result spoils the appearance of the jacket.

In addition to glue funds, leather or suede hollows will need leather or suede leather. They will help to hide the flaw of an elegant product. Small holes or cuts can be patched with a piece of skin obtained from old gloves. You can also not do without scissors, hard brushes, paints for leather products and degreasing agents.

Before you tell how to make a leather jacket at home, we suggest to understand how it can be damaged.

In fact, the described piece of clothing can be worse as you like, but most often the breaks have the appearance of a trancheled corner or a completely eliminated piece of leather. In these two situations, we usually apply different methods of fixing the jacket. We propose to consider them in more detail.

The situation is the first. Before you lies a leather jacket on which there is a break in the form of a corner (see photo). So that this damaged area has become inconspicuous, and the product from the skin again had good view, repair the thing with your own hands according to the step-by-step instruction below.

1. Torn jacket turn on the wrong side. On one of the sleeves we find seams and break it. We decide the product from the skin on the plane and through the rugged portion stretch your hand to the torn place, which is processed by any degreasing substance.
2. Then you prepare a piece of leather, which will continue as a patchwork for a jacket. Attention! Loskutok should be a little more rupture. When the material is prepared, lubricate it with glue. Also wake them around a broken corner. It is not necessary to cut the glue on the cut. After that, the adhesive substance should dry, so at this stage we leave it for twenty or thirty minutes. After the specified time, the procedure with glue is repeating and waiting for a few more minutes.
3. When a layer of adhesive substance grabbing, you need to glue one edge of the broken portion, and after connecting to the other side of the break and over the selected layers to impose a patch.
4. Next, we press the missed place well, we turn the jacket on the front side, bend the repaired portion of things so that in the process of drying it is not revealed. In order for the patch to be less noticeable, its edges need to be additionally treated with a toothpick.
5. Skatened jacket straightened on a flat surface, presidate a previously prepared heavy object and leave for twenty-four hours. If necessary, glued space can paint the paint of the desired color.
6. For the next day, the leather product will be restored and again suitable for use. The only thing that remains to do is to sew a rice sleeve from the wrong side.

The situation is second. If a piece of skin is completely absent on the jacket. In this case, the thing can also be saved at home with the help of sweater materials. In addition to the main set of tools mentioned at the beginning of the section, you will also need to prepare tweezers and scotch.

To carefully hide a hole on a leather jacket, take the tweezers and with the help of it, attach a broken piece of the skin to a broken place, which after immediately lock the scotch. Then remove the product to the wrong side, write the sleeve and get to the damaged area to which the tissue flaps are glued. After that, return the jacket to the previous state, remove the scotch, and correct the piping and leave for drying. Next, it will only stay with an inside sleeve - and the repaired clothes can be worn with pleasure. This method allows you to hide the shortcomings completely without a trace.

Today, "liquid" leather is often used to repair leather products. With this gel-like tool, many disadvantages, including cuts on the material described, are very easy to hide. In use, such a substance is practical and convenient. First, a "liquid" skin is applied to the damaged area with the front side, the flaps are applied on top of it, cut from a conventional medical bandage. Then the fabric layer is aligned and slightly lubricated with a liquid agent. When the resulting patch dries, it must be covered with another layer of "liquid" skin and leave for three hours. During this time, the gel-like substance will be dry and completely imperceptible.

Note! If the jacket made made from the leatherette (dermatina), it is recommended to use a fliesline tape for repair. It is attached to the material with the iron.

In order to make a torn leather jacket as high quality and beautifully and beautifully, consider the useful tips and recommendations below.

• Before sticking sticky tape to the leaving product, check it on an invisible skin. If everything is in order with the adhesiveness, you can safely use the appropriate material for the purpose.
• During the repair, the jacket is undesirable to distract, so the above instructions are better to learn by heart.
• In no case cannot be allowed that the first layer of adhesive is completely dried, as it usually causes difficulties when applying a second adhesive layer.
• For sewing sleeves, use a needle specially designed for the skin. Ordinary needles can spoil the thing and even break the sewing machine.
• If you are worried that the homemade patch will somehow stand out on the background of the jacket, you can make a few more extra lathes in other places. So you not only repaired the jacket, but also artistically place it.
• Try to apply glue only within the cuts or rupture. If the adhesive substance falls abroad the desired area, Immediately remove it with a dry cloth. In no case do not handle the jacket with water.

In the event that you doubt your abilities and are afraid to finally spoil the leather thing, do not save on the tools and ask for help from specialists. And we recommend fans of experiments to do this painstaking work independently at home, adhering to our step-by-step instructions and useful Soviets. Thus, renovating the jacket once, you will no longer worry because of your leather wardrobe, because you can already carefully fix it at any time.