How to clean the shower cubicle. Shower cabin care: how to clean the DK from plaque

It may seem to some that the shower stall does not need special care - constant moisture simply will not allow it to accumulate different pollution... Such a judgment is fundamentally wrong, because like any other element in the house, the booth needs regular maintenance.

The task is complicated by the fact that it uses several different materials, each of which requires a different approach.

Features of the care of shower stalls

The price of a shower stall is rather big, so it is better to regularly clean and wash it than to try to clean up the old stubborn dirt later.

It should be borne in mind that you will have to take care of several different materials:

  • plumbing fixtures (mixer, shower head) are most likely made of steel;
  • the walls can be made of glass or plastic, so when cleaning, care must be taken not to scratch or break the glass / plastic;
  • another important element of the booth is the pallet. It can be made from both natural and artificial stone; from budget models, metal and acrylic models can be distinguished;
  • of course, you will have to face the need to clean the tiles.

It is unlikely that it will be possible to pick up one universal tool in order to solve the question of how to wash the shower stall inside. In addition, for each of the listed elements, several cleaning methods can be given, so you will need a whole arsenal of cleaning agents. Fortunately, with regular cleaning, most types of contamination can be dealt with. folk remedies.

In order for the shower to always please with cleanliness, you need to adhere to a few simple rules:

  • after taking a shower, you just need to rinse the surfaces with warm or even cold water and, if possible, wipe them dry. If, for example, soap suds accumulate in a hard-to-reach place, then the more time passes, the more difficult it will be to remove it;

Note! No cleaning agents are used at this stage.

  • once a week you can approach this issue more responsibly... Here, it will no longer be superfluous to have some means for washing the shower stall. Particular attention is paid to hard-to-reach places;
  • it is advisable to perform general cleaning approximately once every 1-1.5 months, if the shower cabin was well looked after, then this period can be increased. Literally every millimeter of the shower stall is thoroughly cleaned, a variety of scrapers, soft brushes, steam cleaners, etc. are used.

Recommended cleaning agents for each type of surface will be discussed below. General requirement the absence of abrasives can be considered, since they will simply scratch any surface in the cab, as well as the absence of hard brushes and scrapers (the reason is the same). The use of soft rags, rubber scrapers, brushes with a very soft bristle can be considered optimal.

The question of how to wash the shower stall is too general - for example, recommendations for cleaning glass walls are not suitable for a porcelain stoneware tray or chrome watering can. Therefore, it is better to consider the optimal cleaning options for each element of the shower stall separately.

We clean the glass of the shower stall

In this case, everything is simple, glass is a rather durable material and resistant to the effects of household chemicals. Therefore, to clean it, simply spray a spray cleaner evenly over the surface and remove it with a soft cloth. If it was not possible to remove the entire plaque from the first time, then the procedure is repeated until the glass becomes completely transparent.

As for specific cleaning agents, Tilex, Cif and other products from among those that are always on hearing have proven themselves quite well. When cleaning glass, you can use special scrapers like professional window cleaners.

Note! When deciding how to wash the glass of a shower stall, people usually do not care too much about their own safety. When working in a closed booth with sprays, its concentration can increase so much that a person will simply be poisoned. To prevent this from happening, you can spray the product onto a rag outside the shower stall.

It is much worse if the walls are made of plastic, in comparison with glass, it resists the effects of chemistry weaker. In this case, all liquids and gels containing any solvents (acetone, etc.), as well as formic acid and formaldehydes, should be excluded from the list of cleaning agents.

If the shower stall is angular, then in addition to solving the problem of how to wash the glass of the shower stall, you will also have to clean the walls. If this is not done, the seams between the tiles will quickly darken, and its surface will become dull and ugly.

Special steam cleaners can be used to remove stubborn dirt. A jet of steam escaping from the spout of such a device will quickly remove the most stubborn dirt.

How to wash the pallet

When it comes to the question of how to clean the shower, leaving the tray unattended is simply stupid. In this case, a lot depends on what material the pallet is made of.

Porcelain stoneware models are distinguished by an almost mirrored surface. It is best to use special care products to clean them. artificial stone... Usually, dirt does not accumulate on the pallet itself, so it is enough to wipe it from all sides, that's the whole instruction.

Acrylic is easily scratched, so we immediately discard all sorts of universal powders and other abrasive shower cleaners. A suitable product should be labeled that it is suitable for acrylic bathtubs.

All of the above is also true for. And if the scratch on the porcelain stoneware can still be eliminated, even if it will not be easy, then it is almost impossible to remove the scratch from the enamel.

Folk remedies for cleaning

More often than not, in cases where you have to decide what is the best way to wash your shower stall, it all comes down to choosing the right cleaning agent. But there are many ways to clean the shower stall with the help of available tools, while the cleaning efficiency is comparable to purchased cleaners.

There are a few tips to highlight:

  • quite powerful spray for cleaning can be prepared by hand... To do this, you just need to mix citric acid and soda in a 1.5: 1 ratio. Then the solution should be thoroughly mixed and you can spray it on the glass of the booth, after 10-15 minutes it will be enough just to rinse the surface with water. For plastic, such a recipe will not work, after all, soda is an abrasive and can scratch it;
  • you can do without soda - just slightly dilute citric acid with water and wipe the contaminated areas;

Note! For a while, a rather pungent smell will persist, but literally in 30-40 minutes it will disappear if you do not close the shower stall.

  • also glass (and faucets) can be easily cleaned using ordinary medical alcohol (vodka is also suitable), as well as water, all this must be mixed in a 1: 2 ratio. It is enough to dip a rag in the resulting solution and walk on the glasses and taps, everything will shine, as if in a shop window;
  • this option does not end with how to wash the shower stall with folk remedies. You can mention the usual toothpaste, it can be squeezed out on strong dirt and after 20 minutes, just rinse off;

How to clean the shower cabin? This question arises both during its purchase and during operation. Before the immediate start of cleaning, you need to pay attention to the materials from which the shower stall is made. There are varieties that need to be selected with a special cleaning agent so as not to spoil them. appearance.

How to cleanse soap and limescale at home?

It is necessary to take a responsible attitude to the choice of household chemicals for cleaning shower cabins! The following table will discuss the types of materials and their care.

Material name

How to care?

Acrylic pallet

This type requires a rather reverent attitude towards itself, like polystyrene. Acrylic as a material has already become a favorite, because of its light weight, quite convenient transportation... One of the disadvantages of choosing an acrylic pallet is the more diligent care of the material. After all, it is quite easy to scratch and quickly erodes under the influence of harsh detergents. In our time there is whole line detergents specially designed for plumbing made of acrylic.

Enamel coated pallet

Caring for an enamelled bathroom at home is quite easy and simple. The advantage of enamel pallets is their coating: lime and soap deposits do not stick to it. It is a pleasure to wash this pallet, because there are many gels, sprays and powders designed specifically for enamel coating.

It is quite easy to maintain the tiles in the shower stall.... In the same way as the previous type, the tiles can be washed with any detergents intended for plumbing.

Painted aluminum

Aluminum is a rather finicky material. For greater shine, the aluminum surface is coated with paint, which peels off over time and leaves the appearance of bare aluminum... Therefore, it is necessary to clean such material very carefully, without abrasives.

How to choose a detergent?

The choice of household chemicals for shower cabins must be taken responsibly so as not to spoil the appearance of the equipment. To do this, you need to know which of them spoil the surface. The following means and materials should be prohibited:

    sponges with metal spraying;

    harsh detergents;

    microfiber.

The above materials can damage the surface, leaving scratches and marks.

The following products are best suited for cleaning the shower stall:

    silicone or rubber scrapers;

    sponges made on the basis of synthetic material;

    napkins.

How to wash the shower cabin?

The shower stall is often washed with products purchased in stores. By consistency, there are several types of funds:

  • aerosol dispensers;

  • pasty.

Recently, sprayers are rapidly gaining popularity on the market of household chemicals for cleaning shower cabins. They are quite simple to apply to the surface after the end of the water treatment and rinse off with running water.

A tool of this nature is not very well suited for cabins with roller-hinged doors, because they can only be washed from the inside of the shower stall. Thus, being inside the shower stall and using a spray, you can easily breathe in chemical vapors. To avoid intoxication, it is enough to apply the product to the fabric and run over the surface.

During use chemicals it is worth paying attention to the frequency of its use, because the products can be intended for radical and daily cleaning.

Frequency of cleaning

In order for your shower cabin to always shine and be snow-white, it is advisable to carry out preventive maintenance after each use without using cleaning agents. This preventive maintenance will not take a long period of time, and the cabin will always be in perfect condition.

So, the daily prevention of contamination of the shower cabin at home consists in the following actions:

    The cabin is washed with hot water and then colder.

    Using a scraper, all remaining water is removed from the cab walls.

    Wipe dry with a dry towel or napkin.

These are all the unpretentious actions that it is advisable to perform for perfect cleanliness shower cabin.

If there is no time to wash the cabin every time after yourself, it is enough to carry out preventive maintenance once a week.

The amount of time spent cleaning the shower will depend on the frequency of cleaning.

Folk remedies for cleaning the shower

The high price of a detergent for a shower stall is not a guarantor of its quality, and therefore sometimes you have to resort to time-tested folk remedies. The table that follows will clearly describe which products are best used for shower cabins, as well as how to use them.

Name

Usage

The effectiveness of soap in cleaning shower cabins is on a par with more expensive care products. It is necessary to wash the cabin at home with a soft sponge in soapy water.

Acetic or citric acid

It is used for cleaning the shower cabin from limescale. Before using the product, it is necessary to treat the cabin hot water, and only then, using a scraper, apply hot vinegar or a solution with citric acid. Then leave for 30 minutes and rinse with warm water.

White wine

It should be used only after the leftovers become wine vinegar. It must be placed in a spray bottle and distributed over all surfaces of the shower stall, and then washed with warm water.

Lemon baby soap or furniture polish

Both of these tools do a pretty good job of protecting the cockpit from soapy deposits.

Thus, it becomes clear that you can keep the shower stall clean without spending a lot of money, but using affordable folk remedies.

Without exception, all housewives are faced with cleaning every day, whether it be a light marafet or a general cleaning of the house. Some women say that cleaning the bathroom is the hardest thing for them, in particular it is very difficult to keep the shower stall clean. After reading this article, you will learn how to easily and in a minimum amount of time clean the shower stall from plaque at home.

Used folk remedies to combat pollution in the shower

On the modern market there is a huge assortment of household chemicals that can wash absolutely any kind of pollution. But, as practice shows, the use of most chemicals has a negative effect on human health. That is why many modern housewives prefer to use folk remedies to cleanse the shower stall of contamination. All housewives who use elementary improvised means to combat pollution note their high efficiency and absolutely harmless effect on the body.

Lemon acid

With citric acid, you can wash almost any dirt, as it has proven to be an effective remedy against soapy marks, grease stains and limescale. To prepare the solution, you will need to take one tablespoon of lemon in one glass of plain water. Better to use hot water, stir and make sure the acid is completely dissolved. If granules remain, they can scratch the surface. Using a regular dishwasher sponge, begin to gently wash the dirty surface. If the degree of contamination is too high, then you will need to thoroughly moisten the surface and leave the solution there for 10 minutes. At the end of this time, begin to rub the surface vigorously. When finished, rinse the cab with running water.

If you did not manage to achieve the desired result the first time, then you can repeat this procedure again. As an alternative to citric acid, you can safely use freshly squeezed lemon juice.

Anti-limescale vinegar

To wash away plaque on the shower stall with vinegar and water, you will need to prepare a solution in a 1: 1 ratio. The prepared solution should be carefully applied to the contaminated surface and left there for 10 minutes. Then, gently rinse off the remaining vinegar with clean water and wipe the surface with a dry cloth. This recipe can be used regularly as it will not discolor or tarnish the glass surfaces on the shower stall.

Soda

Any experienced housewife knows that soda can quickly deal with various, even stubborn dirt. To quickly clean out a dirty shower stall with baking soda, you will need to moisten the dirty area and gently apply some baking soda to it. Then, using a soft cloth, begin to gently rub the surface. With the very first movements, you will see how dirt is immediately removed without leaving any traces behind. But, it should be said that when you use this tool, do not forget that it has abrasive properties and can leave small scratches behind.

Toothpaste

At home, you can use not only paste, but also tooth powder to clean surfaces. This tool will quickly deal with dirt on metal or acrylic surfaces... The toothpaste easily removes plaque from the shower tray. So, for this, the paste must be carefully applied to dirty areas and left there for 15 minutes. After this time, remove the remaining toothpaste with a soft brush. Together with the remnants of the product, the plaque on the shower stall is completely eliminated. An important advantage of this tool is considered that it does not have an abrasive effect, therefore it can be used to clean any surfaces and after itself it does not leave any traces.

Soda + peroxide

You can also use a mixture of baking soda and hydrogen peroxide to clean the shower tray. Such a tool completely eliminates fungus and mold, which very often appear in the corners of the pallet. The principle of action is very simple, you will need to pour soda on the contaminated areas and leave it there for 10 minutes. Then thoroughly clean the surface and apply hydrogen peroxide. Do not rinse the tray under any circumstances; it must be left to dry. Such a remedy will help get rid of any fungi.

Ammonia for cleaning the shower

Liquid ammonia is considered a very effective remedy for soap stains. But, for greater efficiency during cleaning, ammonia can be used in combination with other cleaning agents, in particular, we are talking about vinegar and soda. To prepare such a cleaning solution, you will need to take 100 grams ammonia, two liters of water, 50 grams of baking soda and the same amount of vinegar. Mix all components thoroughly. The resulting solution is enough to completely get rid of limescale both inside the shower stall and outside.

Vodka

Probably the strangest, but at the same time, an effective glass cleaner is the use of the most common vodka. To prepare a vodka cleaner, you need to take two tablespoons of water for one tablespoon of vodka. The resulting mixture will quickly get rid of soapy deposits not only on the glass surface, but also on the mixers. Also, vodka is ideal for cleaning chrome-plated surfaces of taps and shower heads.

Avoid the use of highly corrosive chemicals such as:

  • Formic acid;
  • Formaldehyde;
  • Acetone;
  • Petrol.

Other cleaning methods

  • Steam generator. If you have a steam generator at home, it will clean up plaque and deposits much faster than folk remedies. Run the steam generator slowly along the walls, then immediately wipe with a dry, clean cloth.
  • Melamine sponge. Lightly dampen the booth with water, wipe with a sponge, rinse thoroughly.

In conclusion, I would like to say that it is better to take care of the shower stall with the help of the above folk remedies. Since such cleaning will cost the housewives much cheaper, moreover, such products are completely environmentally friendly and do not harm human health.

hozinfo.ru

How to wash a shower stall at home - a few tips



We clean the glass of the shower stall



How to wash the pallet



Folk remedies for cleaning




In conclusion

Page 2
  • 1 Sealant in installation
    • 1.1 Varieties
    • 1.2 Installation work
  • 2 Conclusion

Miscellaneous silicone sealant

Installation sealant

Varieties

TYTAN sanitary

TYTAN glass

Installation work




Conclusion

gidroguru.com

How to clean a shower stall - several effective ways

V recent times shower stalls began to enjoy particular popularity, as they are easy to use. However, caring for them is much more difficult than for bathrooms, since plaque forms on the glass walls quite quickly. Below we will look at how to wash the shower stall with folk remedies or special household chemicals in order to return it to its original appearance.


Shower cabin cleaning

General information

There are quite a few reasons for the formation of plaque on the glass of shower cabins:

  • Poor quality water;
  • Sebum;
  • Soap, etc.

Getting rid of this plaque is often difficult. In addition, the booth requires careful maintenance, otherwise its surfaces can be damaged. However, housewives still have some secrets that allow them to keep the plumbing fixture intact for a long time.

Shower area with glass walls

Shower cabin cleaning

Cabin materials

In order to properly and safely take care of the shower cabin with your own hands, you need to know what materials it is made of. Most often, this plumbing consists of the following elements:

When choosing a surface cleaner, it is imperative to take into account the characteristics of the material from which it is made.


Glass scraper

Cabin cleaning tools

Before you wash the shower stall from various contaminants, you must prepare the following tools:

  • Rubber scraper - allows you to get rid of dirt on the surface of the glass walls.
  • Synthetic sponge - useful for washing the pallet.
  • A cloth made of non-woven fibers - for wiping the walls and the pallet after cleaning them.

Note! When washing the shower stall, it is necessary to abandon metal sponges, hard brushes and powder products, as they will damage its surface.

Folk remedies

The greatest difficulty for housewives is the cleaning of glasses, mirrors and taps (see also the article "How to connect a shower stall to the water supply system - basic rules for carrying out work").

To remove plaque from these surfaces, there is a folk, time-tested remedy:

  • Two tablespoons of pure water should be mixed with a tablespoon of vodka.
  • Then in this solution you need to moisten a towel and wipe the dirty surfaces with it.
  • After that, all cleaned surfaces must be wiped dry with a soft cloth.

After washing the walls, it comes down to the pallet. If it is made of acrylic or enamelled steel, it can be cleaned properly with regular toothpaste. It only needs to be applied in a thin layer to the contaminated area and then washed off with warm water.

Lemon acid

Citric acid is a popular folk detergent that can clean a wide variety of surfaces.

Instructions for its use are as follows:

  • In a glass of warm water, you need to mix - 30 g of citric acid and 20 g of soda.
  • The contents of the glass must be poured into a spray bottle and shaken thoroughly.
  • Then the solution should be applied to the contaminated surface and wait 10 minutes.
  • After that, the composition must be washed off with water, after which the surfaces will acquire a shine.

Note! Don't use baking soda to clean the plastic as it can scratch it.

You can get rid of rust with vinegar. It must be applied to the damaged surface with a spray bottle. After half an hour, the vinegar must be washed off along with the rust.


Bleach is a great antifungal agent

If fungus forms on the walls, they must be treated with a weak chlorine solution. After that, the walls must be rinsed with clean water and the room must be well ventilated.

Advice! To prevent the formation of fungus, you should leave the shower door ajar and periodically ventilate the bathroom.

Special household chemicals

If the shower stall is in a rather neglected state, most likely you will have to use special household chemicals. Of course, the price of such formulations is quite high, but, as a rule, they are more effective than folk remedies.

The only thing, before using any household chemicals, you need to make sure that it does not contain:

  • Formaldehyde;
  • Organic substances (acetone and all kinds of solvents);
  • Formic acid.

In the photo - spray for washing shower cabins

The most common formulations are all kinds of sprays for washing walls, pallets and other elements. After applying them, the glass or plastic surface must be cleaned with a scraper, which removes even invisible dirt.

Sashes and walls are often washed with window cleaners. After applying them, it is advisable to treat the surface with a double-sided scraper (a sponge is located on one side, and rubber on the other).

Note! It is necessary to wash the booth from the inside with the doors open. Otherwise, cleaning with household chemicals may lead to poisoning.


Pasty cleaner for shower cabins

To clean surfaces from soap streaks and limescale, use strong pasty or creamy compositions. After applying such a paste on problem areas you need to wait for the required time (indicated on the package), then rinse it off with water. Moreover, you need to rinse off as thoroughly as possible so that there are no stains left.

Advice! You can use an old toothbrush to clean hard-to-reach areas. At the same time, it is necessary to process surfaces with it carefully, without the use of force, so that microcracks do not form.

After cleaning all surfaces, they must be wiped dry with a dry towel, otherwise, after drying, limescale may form. Here, perhaps, is all the basic information on how to wash a shower stall. If you perform cleaning at least once a month, then this operation will not cause any difficulties.

Output

You can clean the shower stall from plaque and other contaminants by different means... The most important thing is to select cleaners so that they do not damage the surface of the plumbing. In addition, it is important to clean in a timely manner, as the dirt gradually builds up and eats in, which complicates the task.

You can read some additional information on this topic from the video in this article.

Page 2

It may seem to some that the shower stall does not need special care - constant moisture simply will not allow various contaminants to accumulate. Such a judgment is fundamentally wrong, because like any other element in the house, the booth needs regular maintenance.

The task is complicated by the fact that it uses several different materials, each of which requires a different approach.


Perfectly clean shower

Features of the care of shower stalls

The price of a shower stall is rather big, so it is better to regularly clean and wash it than to try to clean up the old stubborn dirt later.

It should be borne in mind that you will have to take care of several different materials:

  • plumbing fixtures (mixer, shower head) are most likely made of steel;
  • the walls can be made of glass or plastic, so when cleaning, care must be taken not to scratch or break the glass / plastic;
  • another important element of the booth is the pallet. It can be made from both natural and artificial stone; from budget models, metal and acrylic models can be distinguished;
  • of course, you will have to face the need to clean the tiles.

It is unlikely that it will be possible to pick up one universal tool in order to solve the question of how to wash the shower stall inside. In addition, for each of the listed elements, several cleaning methods can be given, so you will need a whole arsenal of cleaning agents. Fortunately, with regular cleaning, most types of stains can be dealt with with folk remedies.


You will need a whole arsenal to wash the shower stall.

In order for the shower to always please with cleanliness, you need to adhere to a few simple rules:

  • after taking a shower, you just need to rinse the surfaces with warm or even cold water and, if possible, wipe them dry. If, for example, soap suds accumulate in a hard-to-reach place, then the more time passes, the more difficult it will be to remove it;

Note! No cleaning agents are used at this stage.

  • once a week you can approach this issue more responsibly. Here, it will no longer be superfluous to have some means for washing the shower stall. Particular attention is paid to hard-to-reach places;
  • it is advisable to perform general cleaning approximately once every 1-1.5 months, if the shower cabin was well looked after, then this period can be increased. Literally every millimeter of the shower stall is thoroughly cleaned, a variety of scrapers, soft brushes, steam cleaners, etc. are used.

Recommended cleaning agents for each type of surface will be discussed below. The general requirement can be considered the absence of abrasives, since they will simply scratch any surface in the cab, as well as the absence of hard brushes and scrapers (the same reason). The use of soft rags, rubber scrapers, brushes with a very soft bristle can be considered optimal.

The question of how to wash the shower stall is too general - for example, recommendations for cleaning glass walls are not suitable for a porcelain stoneware tray or chrome watering can. Therefore, it is better to consider the optimal cleaning options for each element of the shower stall separately.

We clean the glass of the shower stall

In this case, everything is simple, glass is a rather durable material and resistant to the effects of household chemicals. Therefore, to clean it, simply spray a spray cleaner evenly over the surface and remove it with a soft cloth. If it was not possible to remove the entire plaque from the first time, then the procedure is repeated until the glass becomes completely transparent.

As for specific cleaning agents, Tilex, Cif and other products from among those that are always on hearing have proven themselves quite well. When cleaning glass, you can use special scrapers like professional window cleaners.


Wide scraper with rubber insert works well for cleaning glass surfaces

Note! When deciding how to wash the glass of a shower stall, people usually do not care too much about their own safety. When working in a closed booth with sprays, its concentration can increase so much that a person will simply be poisoned. To prevent this from happening, you can spray the product onto a rag outside the shower stall.

It is much worse if the walls are made of plastic, in comparison with glass, it resists the effects of chemistry weaker. In this case, all liquids and gels containing any solvents (acetone, etc.), as well as formic acid and formaldehydes, should be excluded from the list of cleaning agents.

If the shower stall is angular, then in addition to solving the problem of how to wash the glass of the shower stall, you will also have to clean the walls. If this is not done, the seams between the tiles will quickly darken, and its surface will become dull and ugly.

Special steam cleaners can be used to remove stubborn dirt. A jet of steam escaping from the spout of such a device will quickly remove the most stubborn dirt.


The steam cleaner will handle all kinds of dirt

How to wash the pallet

When it comes to the question of how to clean the shower, leaving the tray unattended is simply stupid. In this case, a lot depends on what material the pallet is made of.

Porcelain stoneware models are distinguished by an almost mirrored surface. To clean them, it is best to use special artificial stone care products. Usually, dirt does not accumulate on the pallet itself, so it is enough to wipe it from all sides, that's the whole instruction.


Good for cleaning stone surfaces

Acrylic is easily scratched, so we immediately discard all sorts of universal powders and other abrasive shower cleaners. A suitable product should be labeled that it is suitable for acrylic bathtubs.


The manufacturer emphasizes that the product is also suitable for acrylic.

All of the above is also true for enamelled shower trays. And if the scratch on the porcelain stoneware can still be eliminated, even if it will not be easy, then it is almost impossible to remove the scratch from the enamel.

Folk remedies for cleaning

More often than not, in cases where you have to decide what is the best way to wash your shower stall, it all comes down to choosing the right cleaning agent. But there are many ways to clean the shower stall with the help of available tools, while the cleaning efficiency is comparable to purchased cleaners.

There are a few tips to highlight:

  • a fairly powerful cleaning spray can be made by hand. To do this, you just need to mix citric acid and soda in a 1.5: 1 ratio. Then the solution should be thoroughly mixed and you can spray it on the glass of the booth, after 10-15 minutes it will be enough just to rinse the surface with water. For plastic, such a recipe will not work, after all, soda is an abrasive and can scratch it;
  • you can do without soda - just slightly dilute citric acid with water and wipe the contaminated areas;

In the photo - a set of simple ingredients for the preparation of a powerful cleaning agent

Note! For a while, a rather pungent smell will persist, but literally in 30-40 minutes it will disappear if you do not close the shower stall.

  • also glass (and faucets) can be easily cleaned using ordinary medical alcohol (vodka is also suitable), as well as water, all this must be mixed in a 1: 2 ratio. It is enough to dip a rag in the resulting solution and walk on the glasses and taps, everything will shine, as if in a shop window;
  • this option does not end with how to wash the shower stall with folk remedies. You can mention the usual toothpaste, it can be squeezed out on strong dirt and after 20 minutes, just rinse off;

Toothpaste is also a good cleanser.

  • vinegar can be used to remove rust stains on metal elements. To do this, it is enough to spray the liquid on the stain and stand for 30-40 minutes, in most cases this is enough;
  • regular Coca Cola is also used to clean chrome elements. Limescale disappears literally before our eyes;

Everyone knows Coca-Cola is a good cleaner.

  • there are also simple ways of prevention. For example, regular furniture polish or baby lemon oil will help prevent the deposition of soapy sediment on the walls and doors of the booth, just rub the surface with one of these substances.

Regular polish can be used as a means of preventing contamination of the walls and doors of the shower stall

So the task of how to wash the shower stall at home, with all the desire, cannot be called difficult. Even if there are no special means at hand, you can always make their analogue yourself.

In conclusion

Keeping the shower stall perfectly clean is not a whim, but a vital necessity. It is unlikely that anyone will like to take a shower if the metal surfaces are covered with limescale, soap stains will flaunt on the doors and walls, and the seams between the tiles will be covered with a disgusting coating. Avoiding this is easy enough, you just need to follow the suggested tips.

The video in this article shows the process of cleaning the shower stall from plaque using a special spray.

Page 3
  • 1 Sealant in installation
    • 1.1 Varieties
    • 1.2 Installation work
  • 2 Conclusion

A shower stall (not a box) is a glass or plastic fence adjacent to a wall, usually tiled with ceramic tiles, and it is quite reasonable that the question may arise as to which sealant for the shower stall is better? The fact is that when installing such a device, a lot of places of abutment to the wall are created, where water seeps very easily, and no installation can save you from this problem - this is simply inevitable.

Below we will look at the installation methods and rules for using the sealant, as well as show you the video in this article.

Miscellaneous silicone sealant

Installation sealant

Varieties

TYTAN sanitary

  • TYTAN sanitary is an acidic silicone that can be used in repair and construction works as it has excellent adhesion to all hard building materials- brick, plaster, glass, metal, wood and so on. It is mainly used for sealing seams and joints - these can be bathrooms, or any construction joints where there is no dust and moisture on the treated surface. It can be noted that such material is used for sealing joints, where vibration changes are possible, as well as ± 20 shifts relative to the base.

TYTAN glass

  • TYTAN glass is an acidic silicone that can be used in renovation and construction work, as it has excellent adhesion to all hard, smooth materials - that is, not only glass, but also tiles or ceramic tiles, as well as plastic. It is mainly used for sealing seams and joints - these can be bathrooms, glazing of houses and balconies, or any construction joints where there is no dust and moisture on the treated surface. It is noteworthy that such material is used for sealing joints where vibration changes are possible, as well as ± 20 shifts relative to the base.

Attention! I would like to note that some are looking for an antifungal sealant for the shower stall and such a tube, in fact, can be sold in stores and even with the appropriate inscription - do not believe it! Fungus and mold in this case start up from standing water, which starts up in the hollows (usually, this is the joint between the pallet and the wall, lined with ceramic tiles).

Only an antibacterial compound can help you, but only if you wipe these seams so that water does not linger in them.

Installation work


First of all, a pallet is installed

Let's start with the pallet, which in any case is installed in the first place - it is from it that the installation of the entire structure begins, that is, the guides are raised relative to the corners of the pallet, and then the door frame is assembled, and fixed and movable panels are hung (see also the article "Hidden shower installation - original and practical solution for your home ").

It can be noted that the assembly of a shower stall without a sealant is possible, but in any case, you will have leaks, since there is an abutment of the structural elements to the wall. Be that as it may, but we will just need to attach the pallet to the corner and set its legs in level - the slope is not needed here, since the design of the tank itself implies it in its configuration.


We drill the wall under the guides

Further, after you have placed the pallet without fixing it with silicone to the wall, you need to mark and drill the holes for the guide profiles - this is best done with a drill, since the hammer drill can break the ceramic tiles.

In order not to be mistaken, it is better for you to put the arc from the door frame on the pallet and navigate along it in order to mark the risers - this way the whole structure will be assembled more accurately, without any distortions. This, of course, is not an instruction, but advice from the author of this article, who has carried out such installations more than once.

So, during the installation of the guide strips, and it can be like the side of the door frame from metal profiles, as well as individual strips (where this box is inserted) silicone is applied to the rack and applied to ceramic tiles on previously drilled holes.

The profile is pressed with self-tapping screws. The sealant underneath will serve as an excellent waterproofing barrier. Please note that even perfectly flat ceramic tiles will not provide the required density when abutting a metal rack - in any case, there will be gaps.

In the future, silicone sealant for the shower stall is not needed until you move on to fixing the pallet, that is, it is the assembly of the door frame and the hanging of movable and fixed (straight or semicircular) panels.

But, again, it can be used to overlay the lower arcuate profile of the door frame on the pallet - this way you can create another hydro-barrier, because in any case, water splashes will fall under the doors, which will seep under the profile, although this is not necessary.


We close the joint between the pallet and the wall

After installing all the parts, a sealant for assembling the shower stall will be needed for the pallet and here the craftsmen can do it in different ways, some stick the acrylic pallet directly on the tile, applying a layer of silicone on the side, and some consider it unnecessary.

The author of this article adheres to the first option, that is, when the pallet is glued to the wall with silicone, this is how the monumentality of the installation is created, because there are no other mounts to the base at the bottom.

But, in addition to this, the sealant is pumped in at the upper line of the joint, as shown in the photo above - first a strip of silicone is squeezed out, and then a finger is drawn along the joint to refine it - the excess is simply collected from the finger on toilet paper.

Please note that when the pallet is sealed, a small hollow is obtained there - this is quite normal and aesthetically pleasing - and this is where mold appears (the silicone turns black over time).

No formulations (antibacterial and antifungal) will be able to resist this process - if they are trying to sell you such a product in a store, it means that they are simply deceiving you, since mold is formed from dried soapy water and an antimer for this - only constant wiping of the joint.

In view of such a situation, the question may arise: "How to remove the old sealant from the shower cabin?"

For such a dismantling, you will need an ordinary kitchen knife with a sharp (not rounded) end - by sliding it along the joint, you can get out the old contents, but in no case do not use a solvent or white spirit at the same time - this can ruin the plastic and acrylic.

Note. Silicone sealant may be different, and the price of this product does not always determine the quality of the composition. We can only say that it is best to choose white rather than transparent silicone.

Conclusion

When installing a shower stall with your own hands, you will in any case use a sealant to seal the joints. But at the same time, try to immediately remove the excess so that a thin layer of it does not remain on the tile, which is very similar to lime or soap deposits (see also the article "Switch for a shower with a spout - types of devices and features of choice").

gidroguru.com

Folk remedies, how to clean the shower stall of nasty lime and soap deposits

Hello everyone!

I washed myself - wash the bath! Alas and ah, we do not always follow this wisdom, although we should. Washing the bathtub and shower stall over time becomes a real problem: unpleasant plaque from water and the remains of soap, gels and shampoos accumulate on the walls.

And if cleaning the bathtub is a relatively small problem, then the shower cabin, due to its very design and dimensions, brings the hostesses a lot of trouble.

But with the help of my tips, collected below, you can easily cope with the most stubborn dirt and henceforth you will not be tormented by the question of how to clean the shower stall from plaque.

Causes of plaque and dirt

A dirty and untidy bathroom is a sentence for the hostess. Keeping it clean is easy, just clean it regularly and follow our simple tips.

Folk remedies that can be found in any home are suitable in almost any case.

Cabins are a convenient thing, especially for those who prefer a shower to taking a bath, and who save space in the room. Cabin designs are different, most often it is a completely enclosed space, in which after water procedures it becomes very warm and humid. This causes mold.

To avoid such a nuisance, always ventilate the cab well, and when cleaning, do not forget about the joints and nooks. After showering, remember to rinse off any dirt with warm water and a soft cloth. Maintain your shower every day if possible. It is possible without additional funds, it is enough to rinse the booth with water and wipe it dry with a microfiber cloth or a simple soft cloth.

Dealing with limescale is very difficult. This is due to the quality of the water itself, which is almost impossible to combat. Hard water will accumulate over time on the sump and walls and should be removed with a soft scraper after a shower.

Here are some tips on how to clean your shower stall at home.

You can use household chemicals: anti-scale liquid for the base and glass cleaner and any available means. However, avoid harsh sponges and brushes and powders that can scratch the surface. Otherwise, you will ruin the booth not only externally: microbes will accumulate in the damage.

You should be especially careful with acrylic coating. But still it is better to dwell on folk methods.

The doors are the most visible and therefore the most problematic part of the booth. Even a dried drop of water becomes a stain on them.

Soap plaque can be washed off with citric acid and soda, which is diluted in water and sprayed with a spray bottle: for one glass of warm water - 20 grams of soda and 30 grams of "lemon".

You can return the shine to glass and chrome plumbing with a mixture of vodka and water (diluted in a ratio of 1 to 2). Soak a cloth in the solution and wipe dry.

Vinegar will handle rust. Spray it on dirt, leave for half an hour and rinse.

The limescale from the door will remove the ammonia. Pour it into warm water in a 1 to 10 ratio.

The shower head also builds up plaque on itself, which can lead to a decrease in pressure. We clean the watering can as follows: remove it and soak it for several hours in 3% table vinegar.

You can get rid of mold with home remedies as follows: pour hot water into a container and add vinegar and ammonia there (for three liters of water - half a glass of liquids each) and ¼ a glass of soda. Protect your hands with gloves, dampen a sponge and treat problem areas. Then rinse with water and wipe dry. The smell is not pleasant, but worth it.

To spend less time cleaning, protect your doors from sediment. How to do it? It is enough to treat them with furniture polish and rub with a soft cloth.

Doors stains can be cleaned with an unusual detergent such as toothpaste. Of course, it is better if it is without dyes. In this case, an old toothbrush will perfectly replace the sponge. Then rinse off the foam with water or vinegar.

That's all. These simple methods will keep your bathroom clean and tidy, you and your household in good health, and your family treasury in abundance.

Want even more helpful articles on how to preserve your beauty and keep your home tidy without the hassle? Subscribe to our group.

Maybe you have your own way of cleaning shower stalls? Share your secrets in the comments.

Natalia Bryantseva

With swelling of the legs what to do folk remedies

You have renovated the bathroom, purchased modern-style bathroom furniture and a beautiful shower, but over time, in the process of use, your beautiful equipment loses its beautiful original appearance, shine and beauty, getting dirty and accumulating soap and limescale, and in some cases of fungus and mold. How to keep the bathrooms clean?

During each bath, streams and streams of water and soap flow down the walls of the shower. Thus, the cabin becomes unsightly over time and it is often difficult to remove the white solid that distorts the beauty of the cabin. Therefore, the owners of this equipment often have a question - how to clean the shower cabin from limescale? Fortunately, limescale and soap can be removed effectively with a range of specialized cleaners and traditional home remedies.

How to wash the shower stall from limescale


Studying the question of how to wash plaque in the shower stall, you will find a lot of recommendations and a lot of tools, but it can be difficult to understand the wide range. Therefore, let us consider in more detail the means for cleaning shower cabins.

Shower cabins should only be cleaned with mild or harmless household chemicals.

  • Never use abrasive materials (such as cleaning milk or paste, baking soda or salt). However, their use can give a quick and seemingly satisfactory effect. Milk and cleaning pastes can quickly remove plaque, but they can scratch the walls of the cab. Some abrasives can also significantly reduce the transparency of the glass and cause micro-scratches on the surface, thus making the surface comfortable for bacteria to inhabit.
  • In addition to cleaners, choose your cleaning brushes carefully. Avoid using hard brushes or scouring pads. Much better is a thin cotton cloth that does not scratch the glass surface and can effectively remove dirt.


Effective means for cleaning the shower stall from lime and soap deposits

Considering the previous tips, the question arises, how to clean the shower stall from plaque and not damage glass and plastic? In the proposals of manufacturers of household chemicals, we will find many successful formulas dedicated to cleaning plastic and glass. For cleaning, it is better to choose products containing natural fruit acids. These preparations are delicate, they will not damage the surface, they do not cause discoloration and will effectively clean the walls and trays from soap deposits.

More stubborn dirt, limescale, stone, we can clean with stronger means. Just be careful not to use them on bathroom tiles - strong cleaning agents can discolor the tiles.

How to clean the glass of the shower cabin?

To clean the cabin windows, use soft formulas that do not drip from the surface to be cleaned. After cleaning the windows, the remaining foam must be removed with a dry cloth or a special sponge for cleaning the cab walls.

Good detergents form an invisible protective layer on the glass, which prevents plaque re-deposition and reduces cleaning frequency.

A common glass cleaner can be used on the outside of the glasses. Thanks to this, the cabin will be more shiny, and the glass will become attractive and will have a fresh look.

Valuable advice. Cab cleaners can damage some of the marble or granite fittings or finishes. If you have wall tiles, especially structural 3d ceramic tiles, it would be best to only use household cleaners that are gentle enough and will not discolor the tiles.

How to clean your shower stall at home - effective home remedies

Proponents of home remedies and methods for cleaning the shower stall from soapy deposits pay particular attention to the fact that chemical detergents can irritate the eyes, skin and respiratory system. Their use is not recommended if small children or people prone to allergic reactions to household chemicals use the shower.
Some effective home remedies are natural alternatives to chemicals:

  1. How to clean your shower with vinegar... We need vinegar with hot water, we need to prepare a mixture in a 1: 1 ratio. Vinegar is very effective in removing limescale and soap. We can use it both on cabin walls and on ceramic tiles. The solution is applied to the surface and left for 10 minutes. Then thoroughly wipe off the dirt and rinse the walls and floor with clean water. Finally, wipe the walls with a dry cloth. The method is effective, safe for health, and at the same time does not cause discoloration or tarnishing of glass plates and tiles. A mixture of vinegar and water also works well to clean up areas where calculus and dirt build up. Simply wipe the mixture over such places, taps and faucets and leave for a few minutes, then polish them thoroughly with a damp cloth. In case of heavy stone build-up, you can use hot vinegar, leaving it on the surface for several hours.
  2. Baking soda and hydrogen peroxide for pan- the product should be used to remove fungi and mold that form in hard-to-reach places, usually in the corners of the pallet. The principle is pretty simple. Apply baking soda to moldy surfaces and leave for 10 minutes. Then brush vigorously to remove everything. Soda alone will not remove the fungus, so wipe the surface with hydrogen peroxide (concentration 3%). Do not rinse, leave the tray to dry. With hydrogen peroxide, all fungi will be effectively removed. The above method is much more effective than many cleaning fluids that fail to remove all forms of fungus, or are too strong and unhealthy.
  3. How to clean a shower stall with citric acid... A 10 g bag of citric acid should be diluted in a glass of warm water and sprayed onto the walls. As with vinegar, leave the mixture on the surface for 15 minutes, then scrub with a sponge and rinse thoroughly with water. If the deposits are difficult to clean, you can change the proportion of citric acid and add two sachets. Remember to always wear gloves when handling cleaning products.

How to remove mold in the shower

Mold grows in unventilated and damp areas. To prevent the development of mold, the bathroom should be well ventilated after every shower. Well, if there are windows in the room, it is worth putting them on airing mode when you are not swimming. This keeps the booth dry quickly and prevents the tiles from becoming a suitable place for bacteria and mold to grow.
Useful Tips

  • Limescale and soap can be quickly removed by special glass impregnation. There are many treatments for glass cabins. You can apply them every 2-3 months. These formulations fill micro-cavities, as a result of which water flows out of them quickly and leaves much less sediment.
  • Another way to reduce the visibility of limescale is to buy a booth with a pattern or pattern on the walls. It is true that spots will appear, but will become much less noticeable.
  • It is best to use home remedies to remove dirt and plaque, which is much less expensive and environmentally friendly. Unfortunately, sometimes very stubborn dirt accumulates, which will have to be removed with household chemicals and special detergents.
  • Remember to use gloves when handling aggressive products and ventilate the area well. Chemicals should not be used in closed and unventilated areas. If we cannot open the windows, then at least we should open the bathroom door, turn on the ventilation and open the windows in the apartment.

02/19/2017 1 3 627 views

Showers are, of course, a very pleasant thing in every sense, but cleaning it is much more difficult than a bath. If you do not know how to clean the shower stall from limescale, do not be upset.

There are dozens of ways to get rid of lime folk methods and special chemical detergents. We will tell you about the most effective ones.

Why does limescale build up in the shower stall?

The main problem with our plumbing is the poor quality of tap water. As a rule, it has increased rigidity, contains a large specific gravity metals and calcium salts. Then we see all this “good” on the shower stall, in the lime deposits of the watering can nozzles, and so on, and it is not at all easy to clean them.

The higher the hardness, the more often you have to work to remove limescale. Modern high-quality filters could solve the problem. But if you cannot establish their capabilities, then we recommend that you systematically clean the plumbing. With the right approach, cleaning the shower stall will not take much of your time.

Cleaning types

Treating household as a science and applying scientific methodology to cleaning, it is necessary to distinguish three main types of "special operations".

  1. Daily cleaning - it is required by basic rules of personal hygiene and observance of order. If you've taken a shower, rinse the shower stall after you with hot water, then wipe it down with a dry cloth. This is enough to keep the cabin clean.
  2. Basic care - about once a week (if necessary, you can more or less often) wash the shower stall with household chemicals special purpose- for washing baths and shower cabins. Go once a week with a soft brush around the corners of the cab. Rub the especially dirty areas with a sponge, rub the glass. If you see a light limescale in the shower, rinse it with plain soapy water (if it is thin and not old, this will be enough) or use one of the special means household chemicals. In short, scrub, wash, clean, but do not forget to wipe the cab thoroughly after wet cleaning.
  3. Major cleaning - about once every few months, the shower cabin in the bathroom requires a general cleaning. If you ignored the current cleaning, and your room is also damp, then you will have to deal not only with lime deposits, but also with mold. This problem also occurs when the apartment or house has not been used for a long time, and the shower stall has been left without ventilation for a long time. During the major cleaning, you will need special strong chemicals, because the usual household chemicals may not handle heavy dirt, especially mold.

We use detergents

To effectively and quickly clean the shower stall, you need to use gel, powder or aerosol for washing bathtubs and shower stalls. Aerosols are especially convenient to use. They are easy to apply on vertical surfaces, spread easily and have excellent cleaning properties.

Apply your detergent to the stain and let it sit for 10 minutes, then run a sponge or soft cloth over all surfaces and rinse off the detergent with water. Then rub the cab dry.

Use a stronger specialty product to get rid of thick limescale deposits. However, avoid those that contain:

  • corrosive acids (e.g. formic acid);
  • acetone and other solvents containing it;
  • formaldehyde.

Removing stains with these products can cause the plastic to melt. In the best case, it is gray or stained.

It is also not recommended to use coarse abrasive materials for cleaning the plastic elements of the shower stall. They can leave scratches, where dirt will subsequently clog, fungus can form there, and then it will be a big problem to clean the shower room well.

Traditional methods

If you do not like to use household chemicals in the household, you can use folk remedies. Experienced housewives always know how to wash the dirt in the bathroom or kitchen. This tool is found in any kitchen and is used, as a rule, in cooking.

Soda! It is not only an excellent universal cleaning agent, but also has the ability to disinfect surfaces. Most often, soda is used in combination with other substances, which greatly increases its effectiveness.

  • Mix a glass of hot vinegar (about 40 degrees) and 1 tablespoon of baking soda and wipe the places where you notice lime deposits with this solution. Wipe well and rinse with water.
  • You can use only vinegar, no baking soda. But it is imperative to heat.
  • You can only use baking soda, but it can leave scratches on soft plastic.
  • For soft plastics, it is best to use toothpaste. It perfectly cleans metal and chrome surfaces. It can be used to rub taps, hoses and a watering can to a mirror-like state.
  • Vodka is good for washing mirrors. Spray clean vodka or diluted with water in a 1: 2 ratio with an aerosol, then rub the mirror until it shines.
  • If you have not only limescale, but also mold, you cannot do without ammonia or ammonia. Mix 100 g of ammonia with 50 g of soda, 50 g of vinegar and pour 2 liters of hot water into this mixture. This fusion fluid will help you remove mold easily.

After such treatment, be sure to ventilate the room and wipe the surfaces dry. And in general, any household chemicals can only be used in ventilated areas, otherwise you can get poisoned by harmful vapors.

Did you like the article? Share it
Up