How to make a swing a nest with your own hands. A swing seat - what and how to make to make it comfortable to ride

Evgeny Sedov

When hands grow from the right place, life is more fun :)

Content

Every child loves to play in the playgrounds, because they are so bright and interesting, but what if it is not always possible to go there, and the kid needs high-quality rest on the street? In the presence of a small personal plot you can make your own playground. Children will especially like the Nest swing, the design of which is safe for the child, because the model has a special strong rope that you can hold onto.

What is a swing nest

Design Spiderweb or Nest - a swing that has many different names: basket, cobweb, oval, stork's nest, swing. Their main advantage is considered to be safety. The child can swing smoothly by himself, or with the help of adults. Several children can swing on a swing at once. Compared to conventional fixtures, the nest is hung across the beam and requires less space to swing.

Design features

The reliable design of the product is made in the form of a large circle or oval. A net is placed inside (for sitting). The oval is held on metal posts with several ropes. A blanket can be placed on top to use the swing as a hammock. The nest is made of durable material, so it can withstand the heavy weight of several children. The advantage of such a product is the water-repellent fabric, thanks to which it is possible to fix the "nest" on the street or in the apartment.

How to choose a round cobweb swing

Unusual Swing Spider Web is a decorative addition to the playground. Outward appearance the device will attract neighbors and their children. The height of the product is selected at will - it can be adjusted, both for an adult and little child... The nest can also be an addition to the summer cottage in the children's corner. When choosing a model, it is recommended to pay attention to:

  • manufacturer;
  • the presence of support;
  • maximum load;
  • material of manufacture.

Manufacturer

The first country to manufacture the Nest swing is Belgium. The KBT company produces children's play equipment for playgrounds: slides, climbing ropes, spring balancers. Today there are already domestic models that are presented in online stores. The devices are suitable for kids' entertainment corner in the house, apartment, in the country. Equipment options for playgrounds can be viewed in the photo.

Accommodation

Thanks to its convenient design, the product can be hung on the street, dacha or at home. It all depends on the size of the proposed design. There are several sizes of product models:

  • The small model can be hung not only on the street, but also in the house, but the disadvantage is that a large number of children will not fit on it (for example, KBT Bench seat “Oval” type).
  • Medium and large can only be hung in the yard. The advantage of this type is the accommodation a large number children on one product (for example, Swing Nest Hit M 1200 mm).

Support presence

The device has a certain support. It is made from dry laminated veneer lumber of different heights. The manufacturer provides at least 60 cm in plus to the main size for laying in the ground. The structure is located in the shape of the letter "A". In the middle there is a circle with a net that you can sit on. As an example, pay attention to the model of a swing garden nest Heath 120 cm on qpstroy.ru.

Another option (suspended) is hung on a certain structure (if there is a hook in the ceiling in the house, if there is a tree or a beam outside). On such a structure, the support involves a cord or rope on which the seat is attached. Before buying, it is recommended to pay attention to the quality of the rope, the maximum weight. An excellent choice is the Samson Nest swing model, presented on the Ozonsport Internet resource.

Maximum load

The highest permissible load depends on the type of swing. That is, if the finished models have small size, then a maximum of 2-3 children will sit on the seat - a large weight can lead to a quick breakdown of the product (round suspended swing Nest on the Sportspower). The product can accommodate up to 6 children on the seat, the reliable frame will not break, and the cords holding the seat will not crack (for example, “Igragrad Nest 120 cm Multicolored” on Papajoy's website).

Manufacturing material

When manufacturing the round swing Nest, only high quality and reliable materials are selected, such as metal pipes different diameters, which provide additional precise fixation of the "web" (for example, Samson nest Heath). The seat is wrapped in a net made of decorative cords, and to provide additional comfort, you can purchase a synthetic pillow with a filling. The support frame is made of wooden beams (garden model "Nest" Hit 120 cm).

Buy round swing with mesh - model overview

You can buy the Swing Nest at any store. However, not all models are available in one or another outlet. Paying attention to the above criteria for choosing a product, you can find it on the Internet suitable models that can make your yard or apartment even more comfortable. Next, we consider products that are popular among children and can be bought in an online store.

Cloud castle

Large garden swing "Cloud Castle" has the following dimensions - 1500 / 2000x1100x850 mm. Suspended with a climbing safety rope, its length can be adjusted from 1 to 2.5 m. The device can withstand a maximum load of 100 kg. The body is made of metal - a steel pipe with a polymer paint, which prevents corrosion. The frame is about 90 mm thick.

Hit

Unusual Heath products have two functions: they can rotate around one axis or swing on two. The main characteristics of the model:

  • the diameter of the product is about 1.2 m;
  • silicone sleeves have holes to prevent rubbing of the rope;
  • the base is made of steel pipe (wall thickness - 1.5 mm);
  • the seat is woven from a twisted polyamide rope (8 mm), which provides strength;
  • suspensions are made of a three-strand rope (15 mm thick), which makes the device reliable.

    • Play garden

    The diameter of the Play Garden round nest swing is 1 m, and the length of the ropes is 2 m. Designed for children over 3 years old. They can be hung in the yard and at home. The set includes:

    • rope (4 pieces);
    • swing Nest (1 piece);
    • steel galvanized fastening carabiner (2 pieces);
    • steel galvanized ring of the carabiner (4 pieces).

    Hanging swings have a special cushion for greater comfort. Impact resistant design the environment as they are made of safe and high quality materials:

    • frame diameter - 61 mm;
    • maximum hanging height - 2 m;

    The popular multi-seat "Nest" of the KBT company is made of reliable materials that are resistant to various mechanical damage and high or low temperatures. A rope rope is used for sitting, and the mount is galvanized steel. Main characteristics:

    • construction size - 75x835x1080 mm;
    • the diameter of the rope rope is 1 cm;

    Medium hanging swing Samson can be placed in the yard or at home. They are cheaper than the models with a mount on wooden beams but no less reliable. Can seat 2 children, although the product is considered single. Ropes are able to protect the structure from falls. The main characteristics of the model:

  • seat dimensions - 100x100 cm, weight - up to 8 kg;
  • a mesh of a nest made of a rope (8 mm) is wound on the basket frame;
  • rope for fastening the basket - 18 mm;
  • main fastening rope - 18 mm,
  • frame material - metal.

    • With Hudora tent

    Hanging swing from the manufacturer Hudora is equipped with a tent and has a frame made of polypropylene pipe... They can swing with one axis of rotation. The product can be used at home or outdoors. Main characteristics:

    • a removable tent has windows and its size is 123 cm;
    • the height can be adjusted from 1.4 to 1.9 m;
    • product dimensions - 110 cm.

    Round swing made of Sport Elite WHSW002-110 rope has overall dimensions Ф60хФ60хН5 cm. When using an additional cushion, it can be used as a cradle seat. The fastening rings are located at the edges of the ropes, with their help you can hang the swing on the hooks of the house, in the yard on any support. The product is suitable for children over 3 years old. Characteristics:

    • frame material - 10 mm PE, steel F25 / 1.1;
    • powder coated metal frame;

    How to do it yourself

    The design of a non-folding product The nest is simple, you can create it with your own hands. The first step in creating a swing is to weave the seat. The main task is to completely cover the surface of the hoops. In order to make a chair, you must follow step by step instructions:

    1. You will need two metal hoops of different diameters, which you can take from bicycle wheels. For the seat, a diameter of up to 70 cm is needed, and for the backrest - 110 cm.
    2. Next, you should take 900 m of cord, which will be used for weaving, 12 m slings, 2 thick cords to connect the rings, 2 wooden rods, tape measure, scissors, work gloves.
    3. The hoops for making the chair must have a cross section of 35 mm. Such metal-plastic pipes have a metal braid inside, which increases the strength of the structure. For the frame, you can use PVC pipes.
    4. A polyamide cord with a polypropylene core is suitable for weaving the seat. Thickness - up to 4 mm. Its advantage is its soft surface, the ability to create tight knots that will not stretch during use.
    5. For 1 m of stroke, you need to take 40 m of cord to create tight turns. They need to be applied with good tension, and for greater density, tighten with effort every 15-20 turns. If you want to create a dreamcatcher rope winding, make large gaps between the drawstrings using a durable textile. Colored ropes can be used to make a swing for children.

    The second step is to weave the mesh. To do this, you can use any form of weaving, but often use the macrame technique - "checkerboard". The weaving pattern can be found on the Internet. The main thing is to watch the tension of the cord. Free knots can be used to make fringes at the edges. Another important detail is the assembly of the structure. Finished hoops must be fastened at one end and wrapped around the structures with one cord. The last step is to design the back of the chair. Weaving should start from the top of the back and go down to the seat.

    The structure can be reinforced with two thick cords that will connect the seat to the backrest. On the seat, you can put a pillow with different upholstery... The finished product can be supplemented with a canopy from mosquito net... The finished structure with a grid is attached with suspension elements. The ropes on which you plan to hang the nest can be replaced with chains.

    In various ways, you can achieve comfortable conditions for relaxing in the country. Along with beautiful gazebos and comfortable benches, do-it-yourself garden swing for the summer cottage is also important.

    The swing is a place where you can ride, relax, and sit when there are no other places in the garden. A photo of a swing in the country with your own hands can be easily seen on the Internet, and a number of rules or instructions will help you without special efforts to create such a useful product.

    And note that such a swing is intended not only for children, but also for adults. The most important thing is to correctly calculate the weight for which the future swing is intended, as well as to correctly build a safe and reliable design swing.

    Classification and properties

    Typically, garden swing is made from traditional materials such as wood and metal. To decorate the external characteristics of the object or to give the reliability and safety of the structure, decorative forging elements are often used in the work. Also used during work:

    • bars;
    • elastic and durable rope;
    • metal pipes;
    • plastic;
    • old armchairs or chairs without legs, which serve as the basis for future swings;

    For a successful result, of course, you first need to make drawings of the swing, as well as an approximate model.

    A garden swing can be created absolutely in different forms and types. Original and comfortable swing they will also be an excellent option for decorating a garden or landscape of any summer cottage.

    Mobile swing

    They are a lightweight design, so it is very convenient and quick to move such a swing from one place to another. For example, in the rain or in winter, you can move such a swing to the veranda. The size of such a swing is not that big.

    Family swing

    The design of such a swing is already more durable and massive. They are endowed with a high and wide back, and in appearance look like large benches for resting, only without legs. Therefore, they are called that, since all family members can fit on such a swing.

    To ensure that the level of reliability is high during the operation of the swing, the swing is fixed on a frame, most often of a U-shape. The swing is fixed by tight chains or ropes.

    Above such a swing, you can also build a roof so that they will not get wet during the rain, and enjoy nature while riding on the swing.

    Children's swing with their own hands

    A separate group of products, which in most cases is a boat or a chair hanging in the air. Children's swing must comply with all safety and reliability standards.

    Suitable for adult children, and small ones can only use with the help of their parents.

    In most cases, the size of a garden swing is entirely up to you. You can also make children's swings in large sizes.

    By the type of construction, the swing is also variable:

    Swing in the shape of a hammock. Such swings are located on wooden or metal beams. A person who sits on such a swing feels that he is hovering above the ground. On such a swing, it is especially great to read books and listen to music.

    Single swing. The designs can be variable, and the installation of crossbars is not even required. Installation of such a swing is not a very complicated process. You can install them absolutely anywhere. Most often it is a pipe swing. These are metal pipes.

    Hanging swing. Question: "How to make such a swing?" does not have a difficult answer, because everything is very simple.

    Note!

    A swing is an ordinary seat that is suspended from several ropes or chains. As a rule, the mounts are located on the sides.

    You see how many options for creating a garden swing you have in your arsenal.

    The key point, of course, is to take care of safety while relaxing on the swing. All possible circumstances should be taken into account, and the swing should be as safe and comfortable as possible.

    Do not forget about the aesthetic properties of creating a swing, too. Beautiful and original swing, made in a special style, will attract the eyes of neighbors and guests, and children and relatives will enjoy relaxing on such a swing.

    Photo of a swing for a summer residence with your own hands

    Note!

    The swing is one of the favorite attractions for children. In principle, this is not too much complex construction, which you can do with your own hands. "Nest" is a suspended model that has some advantages over other structures. It is a good option for installation on summer cottage or in the yard of your own house.

    Design features

    The "Nest" design is quite popular, it is also called "Basket" and "Cobweb". Main feature the product is considered to be its round seat. Thanks to this shape, the swing has additional advantages:

    • the model can fit several kids at once, if you pick up enough large diameter seat;
    • due to the method of suspension, the structure can swing in different directions, bounce and rotate;
    • if you choose the oval version of the seat, the attraction can also be used as a hammock for relaxing adults and children.

    On the other hand, in this modification, the suspension ropes have a significant load, therefore strong and safe ropes must be used. If we take the standard factory model, then it has the following characteristics:

    • the seat mesh in it is created using machine knitting, therefore it easily withstands constant stretching;
    • you can hang it at a height of 2-2.5 m above the ground;
    • the ropes are usually made of polypropylene, they are strong and safe, have a thickness of at least 1 cm;
    • fasteners and rings are made of galvanized steel.

    Ready-made structures are made taking into account the effects of ultraviolet radiation and high humidity, therefore, they are immune to negative external conditions. All these points must be taken into account if you decide to make a swing "Nest" with your own hands. This is beneficial because the cost of products manufactured in production is quite high.

    Construction device

    To independently make a practical, convenient and reliable model, you will need instructions and knowledge of the device of this attraction. You should also think about the materials from which the main elements will be made.

    • The swing is supported by a frame made of metal profiles, it is also made of wooden beams.
    • The base of the seat can be made of a hoop, plastic or steel, this central part of the structure must be well thought out both in shape and in raw materials. There are usually no questions with the net - it can be woven from a climbing rope, it will represent the central part.
    • The basket, as a rule, is complemented by a round pillow with high-quality artificial filling and a nylon cover, which can always be easily removed for washing.

    It makes sense to take the following materials for making a home swing:

    • safety cord or tow rope (diameter 5-6 mm) for binding the seat;
    • synthetic fabric for tents, felt and foam rubber, since the outer part of the suspension needs a multi-colored or at least bright material that children will like;
    • suitable as a support water pipe made of steel (about 4 m);
    • two steel (gymnastic) hoops with a diameter of 90 cm to create a frame.

    You will also need to acquire steel carabiners with a 50 mm cell or locks.

    How to arrange a seat?

    Arrangement of a children's swing should begin with the manufacture of a seat. First, the steel frame of the seat is made, for this, two hoops are taken, they are connected using loops or clamps. If it is assumed that adults will also use the structure, it is better to use a steel pipe with a cross section of up to 15 mm and a length of 150 cm, which is bent on special pipe bending equipment and welded.

    The net for the Nest swing can be woven in any way, if only the knitting is strong enough. To do this, use such weaving techniques as tatting, macrame or patchwork. However, it should be borne in mind that the use of openwork fabric or too thin cords is suitable for the use of the structure by one child. You should also pay attention to the fact that the mesh does not sag - for this, the cords are pulled extremely tightly. The created seat fabric must be securely attached to the frame with knots.

    There is another option for making a seat from the rim of a regular bicycle wheel and a polypropylene pipe, which, bending, is inserted into the rim and fixed through the holes for the spokes. To fix it to the frame, you need four rings and two carabiners.

    Creation of a suspended structure

    When the central part of the structure is ready, you can proceed to making the frame. It makes sense to use the traditional version of a profiled pipe or timber (100x100). Procedure:

    • prepare two support in the form of the letter "A";
    • for the horizontal crossbeam, they are mounted steel pipe, while the height of the swing should be the same as the distance between the supports;
    • ropes and slings are fixed in pairs on the crossbar, polypropylene cables are preferable, but chains previously wrapped with dense material can also be used for suspension;
    • so that the cable does not undergo abrasion, a polyester gasket is made under it;
    • you will need four carabiners to mount the basket.

    After installation, it is necessary to test the structure for strength - this can be done by laying bars with a total weight of up to 120-150 kg on the frame. At this stage, the degree of tension on the ropes is usually checked and the distance of the seat from the ground is optimally adjusted. Already after checking, before hanging the basket completely, metal carcass should be pasted over with foam rubber, and then with special expanded polypropylene, having performed thermal insulation of the steel pipe.

    The outer edge is carefully braided with a turnip, it should be applied evenly, and on top it should be supplemented with a polyester cover. Self-production of such a swing model will not take much time and will require minimum investment Money... The main thing is to follow the instructions so that the structure is strong, durable and safe.

    How to make a swing "Nest" with your own hands, see below.

    An original hammock chair from a hoop for a summer residence. How to make a hammock chair with your own hands: diagram, photo, video.

    Craftsmen found a very interesting and original solution to an ordinary, metal gymnastic hoop, making a hammock chair out of it.

    You can easily make such a hammock chair with your own hands, all photos and diagrams are provided in this article.

    The larger the circle of fabric, the deeper the hammock chair will be, but it will not be very comfortable to sit in a deep hammock. Cut out two such identical circles from the fabric.

    To make the hammock cover removable, you can sew a zipper into one circle, the length of the zipper should be equal to the diameter of the hoop, in our case - the length of the zipper will be 95 cm.Fold one circle in half, cut and sew the zipper.

    Fold the two circles together with the right side inward and sew in a circle sewing machine... Turn the stitched circles out onto the front side.

    Along the edges of the cover, cut out four holes for the hoop mounts and sew them with braid.

    Hole pattern for hammock mountings.

    To make it comfortable to sit in a hammock, a metal hoop needs to be sheathed with a soft cloth, such as padding polyester.

    We put our cover on the hoop. Now the hammock chair needs to be hung, for this we need four ropes, two of 2, 2 m and two of 2.8 m.

    Each rope should be folded in half, tied in a knot and tightened on a hoop. We attach all four ropes to a metal ring or carabiner.

    Now the hammock remains to be hung, we tie a rope on the veranda or to a tree branch in the garden and fasten it to the metal ring of our hammock chair.

    To make it more comfortable to sit in a hammock, you can also make a couple of small pillows.

    The hammock chair can be placed on the veranda or in the garden.

    Making a hammock chair from a hoop does not take long, and you will have a great place to relax on fresh air in the country.

    I suggest watching an interesting video about making a hammock chair.

    Hanging chair - comfortable and unusual garden furniture designed for relaxing outdoor activities. This device appeared in the 50s of the last century and for a short period has become an integral part of the house, claiming to be a truly comfortable home.

    The beautiful "cocoon" can be used as a swing, a place to sleep or meditate. It is noteworthy that it is easy to make a hanging chair for a home or a summer residence on your own using improvised means.

    Users often search:

    Types of hanging chairs

    Currently, there are several types of products:

    1. With a rigid rattan plastic frame. The structure is covered with sturdy fabric. A vine is also used as a base.
    2. With a soft frame (reminiscent of a hammock). The main difference is the size: the chair is smaller than the hammock and therefore takes up little space. Such a product adjusts to the human body, which means that it is convenient both to sit and lie in it.
    3. Cocoon chair. Distinctive feature This modification is 75% hidden interior space. This effect is achieved thanks to the woven walls - macrame. "Cocoon" will appeal to those who love secluded relaxation, hidden from prying eyes.
    4. "Drop" - usually used in the children's room. The chair looks like little house, sometimes equipped with doors. Great rocking chair for a child.

    Self-made hanging chair

    Making a comfortable hammock for a comfortable pastime is not as difficult as it might seem at first glance. First you need to prepare the necessary parts:

    • Metal hoop with a diameter of 90 cm.
    • A piece of sturdy cloth, 3 m long, 1.5 m wide.
    • Braid, non-woven or dublerin.
    • Eight meter sling.
    • Steel ring for mounting the structure to the ceiling.
    • 4 iron buckles.
    • Sewing accessories, tape measure and scissors.

    Let's dwell on the choice of a hoop. As supporting structure you can use the following materials at hand:

    1. Gymnastics hoops... Aluminum and plastic are not suitable for this purpose, since they will not withstand the load of an adult's body. Only steel models can be considered. The maximum cross-section of such a hoop is 16 mm, while 32 mm is needed to make a durable product, which is twice as much (for a wicker chair, this figure should be 40 mm at all). However, a gymnastic ring is great for children's version... The small cross-section is compensated by the multi-layer filler.
    2. Softwood... Such hoops are lightweight, but require careful processing, as moisture and heat contribute to the destruction of the tree.
    3. Plastic water pipe... Perhaps, the best option to implement the idea. PVC is a cheap and durable material. The hoop is made by rolling the cut part of the pipe into a ring. For fastening, parts made of wood or plastic are used.

    The list of materials suitable for creating a hoop is not limited to the listed options. Everyone chooses the basis for the frame himself - it all depends on imagination.

    Preparing the cover

    Cutting material for a hammock chair requires accuracy and care. If in doubt, it is better to leave a small supply of fabric, in the future it can be removed without problems.

    The principle is this: measure seven times, cut one.

    1. To begin with, take a 3-meter piece of fabric and cut out 2 squares from it - 1.5 meters in length and width each. We add both 4 times. In the corner in the center, mark a circle with a diameter of 65 centimeters. Draw a line along the marked points. Cut out the same circles from each square. We move away from the edge of the circle 4 centimeters and draw a dashed segment.

      Cutting out the squares

    2. Place two holes on the first circle. They are designed for slings. Next, fold the fabric 4 times and iron it. We take folds as landmarks. Two slings should have an inclination of 45 degrees, the others - 30 degrees each. Having selected the corners, open the circle and re-iron. As a result, axes are obtained, indicating the points of the slit for the sling.
    3. We select the necessary holes on all axes - rectangular shapes 10 cm wide and 15 cm high. Y is marked in the inner part. A cut will take place along its contour. We fold the circles together, but in such a way that the threads do not overlap with each other. Because of this, the cover will be able to withstand the load better. We put the circle on top. We cut the marks on two circles at once.
    4. Bend the ends of the cut holes to the opposite side. We attach braid along the perimeter of the figure or process it with doublerin so that the material does not crumble. Next, cut through completely and sew along the edge, leaving 3 mm.

      Bend and stitch the edges

    5. Leaving the marked 4 centimeters at the edges, we connect the circles to each other, highlighting the slot for inserting the hoop. We cut the left gap so that we get teeth along the entire edge. We turn out the cover with the front side and iron it.
    6. Cut out the filler in strips, then sheathe the hoop (preferably in 2 layers). We insert the processed structure into the cover. Moving the ring towards the edge, sew all the circular parts at a distance of about 7 cm from the end.

      Insert and sew the hoop

    7. Turn the edges of the unstitched cut for inserting the hoop inside out. We carefully cut off the allowances on the front side so as not to damage the correctness of the circle. We connect the edges and sew on a typewriter, leaving a few millimeters. We move the frame to the stitched end, sweep the fabric by 7 cm.

      Sew the edges

    8. Sintepon mode through the slots and move it inside the material, securing it with threads. We close the side holes with a blind seam. Then we fix the cover on the hoop, stitching it along the verified 7-centimeter outline. After every 4 stitches we wrap the knot. Further rows are made at a distance of 7 cm from the previous one, so that thick fabric can gather in soft folds.
    9. Lanyard mode for four 2-meter segments. Better burn the edges over a flame. We push the end into the hoop through the prepared slot. It is necessary to fold so that a loop is formed. Using a needle, we cut and sew a line. The algorithm is the same for all lines.

      Attach the slings to the hoop

    10. We push the end from each into the buckle, then into the ring and again into the buckle. It is necessary to weave everything well in order to be able to change the height and inclination of the chair. The ring serves to collect the lines.

    Pattern example

    Hanging chairs are a kind of swing, cozy place for relaxation and privacy.

    Making a wicker chair

    Macrame technique allows you to create original products yourself.

    Photo: egg-shaped wicker hanging chair - a comfortable place for reading books in the fresh air

    This unusual structure consists of several circles intertwined in macrame. For such an "egg" you need the following details:

    • 2 metal-plastic rings with a cross section of 35 mm. One for the backrest measuring 1.1 m, the other for the seat 70 cm.
    • Polyamide 4mm thread, 900 m long. In the store, ask about the version with a polypropylene base, which guarantees strong knots.
    • Twelve meter slings.
    • 2 tight ropes for connecting hoops.

    It is worth mentioning that rings of a smaller diameter are also suitable for the product, since these characteristics are the maximum for a chair. It is better to buy the thread of the required length immediately to avoid differences in color or quality. After preparing all the parts, you can safely start working on creating the "egg".


    Any patterns are suitable for weaving the back. The cord is attached to the top. The work is going down. On the lower hoop, the knots are tightened, the rest of the threads are collected in tassels. The design requires reinforcement with 2 wide cords connecting the seat to the backrest. Slings are attached to the finished product - and the hanging chair "egg" takes its well-deserved place in the summer cottage.

    Having made such a device, you will get a cozy corner for secluded relaxation and forget about problems and stress for a long time!

    Did you like the article? Share it
    Print article
    Up