To date, drywall is used in almost all finishing and repair work Oh. It is considered universal, as it has excellent technical specifications.
Drywall consumption during cladding may depend on some parameters of the room itself.

Drywall appeared relatively recently. But, despite this, it has already become very popular among repairmen and builders.
It consists of several layers:

• Thick cardboard sheet.
• Gypsum dough with various additives.
• Thick drywall sheet.

Note. Thanks to this structure, the material is distinguished by its strength and practicality. By itself, gypsum dough is quite fragile, but sheets of dense pressed cardboard do not allow it to dry out and crumble.

At the moment there are several types of such material:

• Wall.
• Ceiling.
• Arched.

The dimensions of drywall sheets at the same time also have differences, there are:

• 1.50x2 m.
• 2x2 m.
• 2.20x2 m.

More about the material:

• Consumption when facing walls with drywall depends precisely on such parameters.
• The thickness of the wall drywall is different from the ceiling. The latter type of material is not too thick, as it is used to finish the ceiling, and the dimensions of the drywall and its thickness affect its mass.
• Arched drywall has a perforated structure. This is necessary in order to freely give the material the desired shape. This type of drywall is quite light and can often be found on the surface of the wall as a decoration.
• Various lighting devices are placed under the surface of such material. You can also use arched drywall to make partitions to divide the space into functional zones.

Technical properties and indicators of drywall

At the moment, there is moisture-resistant and fire-resistant drywall. The estimate of wall cladding with drywall implies the clarification of the use of one or another type of material.
Drywall is quite durable, as it can withstand significant mechanical and physical stress on its surface. It is very practical, as it does not require special knowledge in its installation.
There are several types of finishing of such material:

• Plastering.
• Coloring.
• Pasting.

So:

• You can use natural stone or artificial, ceramic or glass mosaics on the surface of drywall, and so on.
• The service life of drywall is at least 15-20 years, but it all depends on the type of material. Thanks to the properties of the material, you can create unique design both wall and ceiling surfaces.
• The price of drywall depends on its type. If it combines fire resistance and moisture resistance, then the cost of the material will be high.

Drywall is mounted on a metal profile frame, the calculation of which is also included in the consumption of materials for facing wall surfaces.

Why drywall is chosen in repair work

The main advantage of drywall, both wall and ceiling, is a fairly quick installation. With the help of such work, it is possible to level the surface very easily, especially if there are large defects on it.
Material Features:

• After working with drywall, there is not much construction debris left, as from the use of plaster. As a result, the surface is perfectly flat and can be finely finished.

Interior designers, realizing their projects, often use drywall. This material is good in its versatility - it can be used to easily build a partition, create ceiling structures of almost any shape, make niches and align walls. GKL are quite affordable, but how much does drywall installation cost?

Of course, as for many other works, the cost greatly depends on the region and the complexity of the structures being created. Let's give an approximate calculation of how much it costs to sheathe a square meter with drywall.

Conditions affecting the cost of installation work

Before you determine even the approximate amount that work with drywall from the masters will result in, you need to take into account many factors:

The cost of drywall installation works varies greatly depending on the region.

• Any object (apartment, house, office) is unique, and the complexity of the work different rooms different. Therefore, the cost of installation will be different.
• The price depends on the number of layers of drywall when sheathing. Often, for strength, partitions are made of two layers, especially in apartments.
• The place of sheathing also plays a role: for services, how much it costs to sheathe a wall with plasterboard, and how much it costs to sheathe a ceiling with plasterboard, the prices are different.
• Laying soundproofing in the structure before plasterboarding will also affect the final price.
• If the finishers also have to bring drywall sheets, this will increase the final cost. By the way, it happens that the craftsmen need to perform some complex forms from the plasterboard, which is impossible in an apartment, as it requires special stands. In this case, transportation will be required.
• The creation of complex niches, boxes, ceiling structures requires an increase in payment, since during these works the footage is small, but high skill is required.
• Is frame assembly required? Under certain conditions, drywall sheets are attached directly to the wall.
• The thickness of the metal profile in the frame of plasterboard structures also affects the cost. As a rule, it is more convenient to work with a frame with a wide (600 mm) base, so the prices are lower than for a 400 mm metal profile.
• If work is required to sew wiring into the wall and cut out holes for sockets and switches, then this is paid extra.
• Work on finishing leveling with putty and preparation for finishing work with a primer must also be taken into account.
• The calculation of the average cost of plasterboard sheathing is relevant with a ceiling height of no more than three meters. If the walls are higher, then the price of the work increases.

Prices for installation work

The following tables show the approximate cost of the installation of plasterboard structures. These prices are valid for ceilings no more than three meters. The data are averaged for the Moscow region for 2017.

Plasterboard ceilings

Prices do not take into account the creation of complex structures, niches, rendered boxes.

Plasterboard partitions

If you want to insert a door into the partition, then installing a finished door without cutting locks and hinges costs about 2,000 rubles.

Leveling the wall with drywall

Prices do not take into account the creation of complex structures, niches, arches, outrigger boxes.

Creation of complicated structures

Masters can perform designs of almost any complexity. In addition, each element will increase the cost of work.

Painting works

When calculating the cost of work, it must be remembered that priming is done after each layer of putty.

When choosing a master for finishing the premises with drywall, give preference to trusted companies.

Calculation of the cost of materials on a specific example

Of course, you can do the work yourself. In this case, you will have to pay only for the materials.

Here is an approximate estimate for a 10 sq. m of a simple wall with a ceiling height of 2.5 meters:

The cost of work to create such a design by professionals will be about 4200 rubles, that is, the costs of self installation will decrease by about half. Of course, the opportunity to save is very tempting. However, it should be remembered that work requires not only Consumables but also a special tool. Therefore, if you are not confident in your abilities, then it is better not to mount drywall constructions yourself. In case of an unsuccessful attempt, you will have to not only pay the finishers for the work, but also again spend money on materials.

INSTALLATION OF SUSPENDED CEILING FROM gypsum board - WORK PRICE PER M2.

If the height is more than 3 meters, then the price of installing drywall structures increases by 100 rubles for each next meter

If the plasterboard ceiling drops more than 11 cm, the price increases by 10 0 rubles per m2

PRICE OF INSTALLATION OF A GYPSUMBOARD BOX FOR M/P - 2019

The price of painting works in Moscow on the walls with a guarantee against cracking of the seams - 900 rub./m2 of a flat surface. Works on complex surfaces are assessed individually.

At your request, we can provide you with high-quality material at a very competitive price. But we warn you that delivery in Moscow costs 2000 rubles, so it is more expedient to buy them for small volumes at the nearest construction market.

M installation PARTITION ok drywall PRICE in Moscow FOR 2019

If the height of the partition is more than 3 meters, the cost of plasterboard partitions increases by 100 rubles per meter of height.

The exact prices for work and the average prices for materials are given. As a rule, a door is installed in each partition. Door installation costs - 2000 rubles, provided that it is a ready-to-install door, i.e. there is no need to cut hinges, locks and trim the box.

INSTALLATION OF gypsum board walls PRICE INMOSCOW V2019

One layer of sound insulation up to 50mm (mineral wool) costs - 80 rubles.
One layer of TECSOUND soundproofing costs - 200 rubles.

If our design deviates from the main wall by more than 11 cm, the cost of installing plasterboard walls increases by 100 rubles.
If the height of the structure is higher than 3 meters - the cost of installation increases by 100 rubles for each subsequent meter of height.
The price difference is obvious. But what harder design, the more reliable it is, and the more expensive it is.

Painting work prices in Moscow for 2019

NOTE!!! The primer is made before applying each subsequent layer of puttying or painting. Rough layers of putty are usually sanded out each subsequent time. Wall painting is calculated depending on the number of layers. 1 layer - 180 rub.

Prices are given for Painting works in Moscow on the basis that they are produced on a blank, even wall. On this page you will find the cost of calculating slopes (door and window), as well as works on all kinds of niches, arches, etc.

Since the main direction of our company is installation of plasterboard and plasterboard ceilings, let's consider the number of operations per 1 m2 drywall walls :

• Jointing and priming of the entire surface
• Sealing joints with Uniflot putty
  
• Gluing the seams with paper tape on a special glue (our revision)
  
• Draft putty Vetonit LR+ one layer
  
• Sticking fiberglass (cobweb)
  
• Rough putty Vetonit LR one layer
  
• Finishing putty Shitrok 2 layers
  
• Painting in two layers
  

These are the basic prices for painting work in Moscow, but as a rule, all rooms have door and window openings, and there are straight and curved boxes on the ceilings. All these elements must be beautifully and correctly designed. For the design of straight openings and boxes, we use special metal perforated metal corners. The standard length of these corners is 3 m, which is quite suitable for all door and window openings. These corners are attached to the slope with gypsum mixtures. It can be Rotband, Fugenfüller, Volma, etc. We apply the mixture to the slope angle and press the corner with the “rule” according to the level along the entire length, so that it does not bend.

Estimate for internal Finishing work and drywall is calculated according to the prices of building collections (parts 10 and 15).

Types of drywall

Examples of estimates

• for facade renovation. This example estimate represents the prices for facade work, incl. facing, plastering and painting of the outer surface of buildings and structures.
• for finishing work. This example of an estimate is made up of prices for finishing and redecorating office premises, in cladding ceramic tiles, plastering, painting, etc.
• We also invite you to appreciate the amazing works of interior art: collectible figurines and designer souvenirs. This example of arts and crafts will become a real decoration of the office space, along with elite ceramic tiles, decorative plaster, paint, etc.

An example of budgeting for the installation of drywall and finishing work

Estimates for finishing work: painting, plastering, laying tiles, was, probably, almost everyone, moreover, not necessarily writing it down on paper, but simply estimating for themselves how much it would take to spend on the next repair. It usually goes something like this: "I need to buy two cans of paint - did I bring enough money with me?" They offered the lowest price for the same amount of work.” If in the first example there is a simplified estimate of materials, then the second option is a classic estimate of work, compiled, although not by TERs or FERs, but at ordinary commercial prices. The wording used in this context “estimate for finishing work” does not quite coincide with the classical definition and scope of work included in the collections of estimated prices for finishing (part No. 15 of building collections in TERs, GESNs or FERs). So, according to the estimated standards, examples of finishing work are facade cladding, wall and ceiling plastering, painting with oil, water-based compositions and varnishes, window glazing, wallpapering. However, in the generally accepted sense, it is customary to include a much wider list of finishing works: from the installation of gypsum boards to laying tiles, i.e. almost all interior decoration, which does not imply changes in the structural elements of premises and buildings. So, despite the fact that the installation of gypsum plasterboards is not included in the collection of finishing works, but refers to the prices for wooden structures, they are usually carried out for external decoration of walls and ceilings and in the everyday sense refer specifically to finishing work. However, it is important to note that finishing works (collection of 15 THER/FERs) or wooden structures (collection of 10 THER/FERs) are assessed, which include drywall installation rates, using different indexes and coefficients in the context of different conditions. construction and repair work. Let's consider a sample of budgeting for wooden structures using the example of calculating the installation of partitions from plasterboard.

A sample of costing for the installation of plasterboard partitions (single-layer sheathing and a single metal frame) in the Territorial Base of Estimated Prices of the Krasnodar Territory at base prices

Construction technologies, according to which gypsum boards are installed, continue to be relevant and in demand in the field of finishing work. The selection of prices for the installation of gypsum boards in building collections is regulated by both general functional and physical properties gypsum board, and features of the technological cycle of finishing works. Thus, the lining of walls, ceilings and partitions with gypsum plasterboards can be done in one or more layers, with a double or single metal frame, with the addition of galvanized steel sheets or provided space for communications. In addition, individual drywall sheets may have additional useful properties, such as moisture resistance (GKLV) or fire protection (GKLO). If the cost of installation of various types of drywall is almost the same, then the total amount at a rate can vary significantly from the price of the materials used in the production of work (gypsum plasterboard, mineral wool etc.). As an example, consider the estimates for different kinds GKL and under different ways their installation without taking into account materials, compiled in the prices of HPES, which, unlike FERs and TERs, are decomposed into elements of direct costs not only in terms of amount, but also in terms of the number and name of labor, material and operating costs.

As can be seen from the example, during the installation of drywall various types almost identical in composition are used labor resources and equipment. True, with an increase in the layers of drywall sheathing, as well as the complication of structures metal frames the costs of the main workers are also progressively increasing. After the installation of drywall sheets, they are often puttied, unless otherwise provided by the construction or repair work plan.

Along with the price of puttying, the estimate for finishing work or installation of drywall often reflects the cost of finishing the surfaces of slabs and prefabricated elements for wallpapering or painting. Such a finish, in particular, takes into account the costs of leveling or grouting the surface of the sheet (single-layer plaster).

When installing partitions from plasterboard sheets, doorways are often made in them, requiring additional design or decoration. This work is also provided for by prices in FERs, TERs, GESNs in Part 10.

Considered examples of budgeting for the installation of drywall sheets as an option interior decoration structural elements of the premises: ceiling, walls, partitions, demonstrates the possibility of selecting a set of prices that most closely match the composition of the repair and construction works and materials used. For the correct preparation of estimates for the installation of drywall, it is necessary to use the current price bases: FERs, TERs and HESNs, - included technical parts and appendices to collections, price conversion indices for the current period, collections of prices for resources used in the production of finishing works.