For a garden with your own hands from scrap materials. Interesting DIY solutions for crafts and decorating a garden or cottage

Crafts can look organic not only at home, but also in the garden. They will serve spectacular decorations suburban area and will add unusual notes to it.

Gardeners often prefer purchased figurines and other similar paraphernalia, believing that all the ways to create accessories are old. Designers and craftsmen are constantly coming up with something new, so there are many ideas for decorating a summer cottage that cannot be called trivial.

The creation of a flower bed can mean not only the arrangement of flowers, but also the manufacture of a spectacular frame. Check out this simple floral arrangement.

To make it, you only need an old garden wheelbarrow, as well as seedlings or seeds of selected undersized flowers. Place the item in the chosen area, fill the container with earth and plant flowers - that's the whole instruction!

A stone flower bed-basket is something that seems difficult to perform, but it is done simply. The instruction is in front of you:

1. Find boulders in different colors and sizes.
2. Determine the location for the flower bed. Outline the borders of the round flower bed.
3. Make a concrete mix. Mix cement with construction sand in a ratio of 1: 4 and add a little water to thicken the mixture.
4. Lay out the first row of stones.
5. Lay out the next rows of stones, holding them together concrete mix until the base of the flower bed is ready.
6. Remove excess cement.
7. Measure the diameter of the resulting base.
8. Lay an arc on the ground made of stones. The distance between its ends should be equal to the diameter of the base of the flower bed. The stones must be connected with concrete.
9. When the arch is strong, attach it to the top of the base with concrete and stones.

After all the concrete has hardened, you can pour the earth inside the "basket" and plant seeds. Here is a photo of finished flower beds.

A flower bed made of twigs looks natural and impressive. It fits very harmoniously into any garden. You can do it this way:

1. Draw a circle on the ground that will form the outline of the flower bed.
2. Place several twigs on its borders. They need to be inserted into the ground at a distance from each other.
3. Take a thin twig and twist it between the vertical twigs. Wrap the tip and glue it to the back of the flower bed with wood glue.
4. Weave the rest of the rods. Once you notice that the basket is tall enough, cut off the tops of the vertical bases.
5. Pour earth into the inside of the flower bed and plant flowers.
6. Take a few twigs and form an arc out of them. Insert their edges between the rods of the top of the basket.

Looking for the most natural and simple option? Take a closer look at the flowering stump! You just need to find a part of a tree trunk, make a cylindrical hole inside it, install it on the site, pour earth into the cut hole and, of course, plant flowers in it.

Have an old iron unnecessary bed? Turn it into a huge flower bed! Use five pieces of plywood (one base and four sides) and nails to make a box, place it on the bed and plant flowers in it.

Figures of representatives of the fauna with their own hands

Unfortunately, many animals are extremely difficult to keep in the country. There is a good alternative - handmade figurines of fauna representatives.

Perhaps one of the most simple options Are large ladybugs. To make them, you will need stones and paint, which can be purchased at any store with goods for construction.

To prevent the drawing from being smudged, first paint the entire boulder with red paint and then dry it. Next, you need to apply a black dye, and after it dries, you should place accents with white and yellow.

You can decorate your garden with a cute black bird with the help of a canvas (bottom part), a shovel and several other similar items.

To make one bird, you need black paint, a shovel blade, glue, thick wire and modeling dough. The last ingredient can be purchased at craft stores. The instruction is in front of you:

1. Cover the blade of the shovel with black paint and wait for it to dry.
2. We fasten two pieces of thick wire to the surface where the "birds" will sit.
3. We put yellow modeling dough on the pieces of wire so that we get bird's feet. We make a thickening in the upper part. The top should be flat.
4. We glue the shovel blade to the tops.
5. We paint the thickenings on the upper part of the “legs” with black paint.
6. We make eyes from white dough for modeling, and a beak from yellow dough. Try to sculpt so that the base of the beak and eyes are flat.
7. We attach the parts with glue to the top of the shovel blade.
8. On the "eyes" we make black dots with black paint.

Are there a lot of flowers in the garden? Then it is worth decorating the site with large decorative butterflies!

Bottle, varnish and glue are the main materials required. Everything else depends on your imagination. The manufacturing technique is not complicated:

1. Draw a butterfly on a plastic bottle.
2. We cut it out and bend the middle so that the figure looks natural.
3. Coloring the butterfly.
4. We protect the image with a varnish coating.
5. We glue sequins or rhinestones in the middle of the figure, imitating the body of a butterfly.
6. We glue the resulting product to the surface.

If you find it difficult to call yourself a good artist, use the attached stencil.

You can paint the wings of a decorative butterfly with the most different ways... The table shows the possible effects and the materials required.

DIY decorative interior items

It is pleasant to spend time in the garden not only in daytime days. The scent of flowers that did not have time to close, night butterflies, the starry sky - all this creates a special atmosphere. In order to make it more magical, you will need unusual flashlights.

To make an original decorative lantern, you need a garland, threads, construction glue and a balloon. The manufacturing technique consists of several points:

1. We inflate the balloon. It should be round.
2. We smear the ball with glue and immediately wrap it with threads. Try to leave a hole at the bottom.
3. After the glue is completely dry, deflate the ball. Cover it with varnish.
4. Place a garland in the hole of the thread ball.

This is how the finished product will look like, which can be placed on a table in the gazebo.

With the help of stumps and firewood, it is not difficult to make a table with chairs. You can also make a regular garden furniture, and a small decorative one.

This is not to say that when creating such wooden furniture special subtleties must be taken into account. It is enough just to saw off most of the tree trunk and make its top and bottom even. The base of the chairs is made using the same technology, only a small rectangle should be left in the area of ​​the top, which will play the role of the back. Nail two small bars to it with nails so that they are in an upright position, and attach the horizontal half of the bar to them.

An iridescent vase is a bright accent for a summer cottage. It can be used not only for placing fruits from the garden and garden on it, but also as a drinker for birds.

For manufacturing, you will need old discs, a vase made of thin plastic or other material and glue.

Technique for creating a sparkling vase in front of you:

1. Grinding old discs.
2. We glue the pieces to the vase. Attach them seamy side up. It is desirable that they are located as close to each other as possible.
3. We install the finished product.

Figurines of mushrooms for giving

Mushrooms look especially impressive if you have a vacant lot with grass on your site. To make them, you need white paint or putty buckets, old large plates, glue and dyes.

First you need to paint the inverted plate. To make a fly agaric, apply scarlet paint, wait for it to dry, and then make white dots. After the colorants have set, glue the plate to the inverted bucket.

Original crafts from unusual materials

Are there many damaged or unnecessary green hoses at your summer cottage? It's easy to turn them into a spectacular cactus! In addition to hoses, you should stock up on metal silver wire. And also, instead of the wire, you can use plastic fastening clips.

The technology of creation does not imply complexity. First, roll the hoses so that they form a circle. The joints must be fastened with pieces of wire and left outside with tails that imitate thorns. Between the topmost row and the previous one, you need to stick pieces of hoses with multi-colored taps. They will look like flowers.

It was once fashionable to make swans out of tires for wheels, but this idea is already considered commonplace. If you are looking for an extraordinary, but simple option, try making a snail. You only need two tires. One just needs to be painted, and from the other, cut the body of a snail. An example of a product is presented to your attention.

Video - Royal pigeon from plastic bottles

Now many residents country houses strive to decorate a meadow or flower bed with an unusual composition that will attract the attention of passers-by and delight the hosts and guests. Today you will be inspired to make crafts from various junk materials.

Plastic bottles are empty containers that nobody needs. Many people simply throw them mercilessly into the trash can or trash can. But, experienced needlewomen carefully collect plastic bottles different shapes and size. For what? For the manufacture of incredibly beautiful and original crafts for the garden and summer cottages. You can make different birds and animals that will become a real decoration of your personal plot.

This article is devoted specifically to crafts for a garden and a summer residence with your own hands. You will learn about the secrets of making deer, sheep, cat, horse, etc. These funny and graceful hand-made animals look great in the garden too.

To make a brown deer, you need to take a five-liter plastic bottle and cut off the neck of it. A 1.5-liter bottle is attached to the cut point with the help of self-tapping screws, bottom down. A liter bottle is attached to the neck of this container.

You just need to cut a circle in the center and insert the plug of the previous workpiece into it. It turns out the head on the long neck and body of a deer.

Then 4 holes are made in a five-liter bottle (bottom) and wooden long slats are inserted into them. These will be the legs of the animal.

The tail and ears are cut out of a plastic container and placed in the appropriate places of the craft.
It remains only to paint the deer with brown and white paint, paint eyes and attach antlers from ordinary twigs of an intricate shape. The brown deer is ready!

Yellow deer - DIY craft for the garden

A yellow fawn is made according to the same principle, only there are a couple of nuances. The five-liter bottle is attached as a whole, and the neck is the tail. The neck is made of a short wooden lath.

DIY yellow deer

Plastic bottle cat

This animal is made in a completely different way. First, you need to collect a lot of plastic bottles of 2 or 1.5 liters, about 100 pieces.

How to make a craft for a garden in the form of a cat step by step:

1. From each container you need to cut off the bottom, it is this part of the bottle that is needed for work.
2. Then two balls must be made from a metal mesh: a large one - a body, a small one - a head. They are easily and securely wired together.
3. Then you need to attach the bottoms of the bottles to the net. This can be done with thin wire or liquid nails.
4. The hat, tie, tongue and eyes are made from pieces of old linoleum.
5. It remains only to paint the cat in White color(it is possible in any other).
6. Paint his eyes, nose and mustache with black paint. But decorate the tongue, headdress and tie in bright shades of red.
7. In order for the structure to stand firmly, it can be fixed on a metal rod dug into the ground.

Plastic bottle cat

DIY sheep

The big lamb is made using the same technology as the cat. You prepare the bottoms of the bottles and fix them on a ball formed from a metal mesh. The legs are made of wooden slats. The ears and muzzle of the animal are cut from a five-liter bottle. And here is a small lamb formed from polyurethane foam.

Sheep from plastic bottles for garden and cottage

DIY horse for the garden

It needs a large plastic bottle. In our example, we replaced it with a plastic flower pot. This will be the basis for the animal's body. On four sides of the pot, wooden slats are attached to self-tapping screws. The neck and tail are also cuts of a wooden stick.

The horse's head is made of paint cans and the hooves are plastic trays for flower pots... The animal's mane and tail is an old blue wig. You can attach hay or threads instead of artificial hair.

The finished figure is covered with brown paint, and your favorite plant is planted in the pot. It turns out both a flower bed and an interesting character!

Piggies are the most common crafts for the garden and summer cottages

Large water bottles can be used as original flower beds in the shape of a pig. For this, the side of the bottle is cut off - flowers will grow there. Then ears are cut from the remaining sidewall.

Four bottles of one and a half liters are taken and the necks are cut out, they will be the legs of a pig. The resulting legs are attached to the body with wire. The piglet turns white or pink.

Then you need to fill the inner space with soil, having previously made several holes in the belly. Now you can plant seedlings. Such a pig will look great in combination with any other flower bed.

Craft - a peacock for a garden with your own hands

Peacocks are extraordinarily beautiful birds. You can admire their tail for ages. It is a pity that such beauty can not be seen in every courtyard. Although, the situation is fixable! You can make a gorgeous peacock with a long tail from ordinary plastic containers.

The following materials are suitable for work:

• Styrofoam;
• stationery knife;
• metal rod;
• stand (log);
• old canister;
• metal grid;
• wire (thick and thin);
• awl;
• plastic bottles of all sizes;
• scissors;
• paint enamel of different shades.

First, take a stand (it can be a board or a wooden log) and fix cuts of a metal rod on it, making two legs of the future bird. Then you need to make a torso from the old canister. For this, the containers should be given the correct shape by cutting off the excess parts. You can fix the canister to your feet with a wire.

Peacock for a garden with their own hands

The neck and head are cut out of Styrofoam and secured with wire to the canister (torso).
And all that remains is to form the tail. For this you need to take metal mesh, cut it to size and lower it along the length to the floor. In order for it to hold, it must be attached to the canister with self-tapping screws or wire. Everything, the basis of the future bird is ready!

Now the most painstaking stage of work is making feathers from plastic bottles. Long feathers are needed for the wings. To do this, the bottle is cut into stripes, and oval oblong blanks are cut out of them. You will also need short oval details to decorate the body and neck of the bird.

You can attach the feathers to the canister and foam using self-tapping screws or pieces of thin wire. In this case, you need to move only from the bottom up, so that each subsequent layer hides the fastening of the previous parts.

For tail feathers, it is better to use green plastic bottles with a volume of 2 liters. One bottle will make 4 feathers. You need about 70-80 pieces. The tail feather has an oblong oval shape with fringes along the edges. It is better to immediately draw a pattern on each blank. When attaching feathers to the tail, you can use wire or nylon thread. You should move from bottom to top, closing the previous row.

The crest, beak and fingers are also cut out of the plastic container. The final stage of work is painting feathers with enamel paint. Colors should be vibrant and saturated.

Our peacock made from plastic bottles is ready!

Unusual crafts for giving with your own hands

To decorate a flower bed, you can use a wide variety of ideas, you just have to turn on your imagination. For example, you can give a second life to an old non-working TV.

To do this, the back panel is opened, everything is thrown out, only the body is left. The panel must be put back. We fill up the soil inside the TV and outside in such a way that it seems that the earth is pouring out of the screen. Now we are planting small flowers. The illusion is that a colored stream flows directly from the screen.

An unusual flower bed can be built using the most original items. It could be a wheel from an old cart rubber tire, old suitcases, dishes, umbrellas, basins and even old shoes.

Yesterday we went to the kindergarten after a long rest. During this time, he seemed to be transformed - the workers did a great job. preschool as well as the parents of the children.

Everyone knows how the sites of our preschool educational institutions are equipped. Modern plot the garden looks like this: a veranda, a sandbox and two or three truck tires, half dug into the ground. And… that's it! Where and what to play for a group of twenty kids?

Therefore, for our children to have a comfortable time at fresh air we are parents as well as caregiverswe try to somehow embellish and equip playgrounds.

For making crafts in the areas of our kindergarten, old buckets, basins, pots, paint barrels, plastic bottles, pieces of hoses, logs, old furniture, tires and even old children's shoes came in handy.

Let's start with what we, the parents, built on our site of the kindergarten, where the children of our group play.

All work was done in early summer by several enthusiastic parents.

Crafts on the site of the kindergarten

Made just such boat... Our caretaker gave us shields from the old wardrobe and paint for the construction of the "ship". Some of the dads got hold of an old steering wheel from a Zhiguli, some brought tools, some fasteners. They made it for three or four hours with their fathers, and then the mothers carefully painted the boat with paints.

Of course, it is unlikely to survive until next spring, since the body is made of chipboard, it will swell and fall apart when moisture gets in. But the kids have fun.

From old metal pots, on which we once sat, they built such an attraction "Bouncy"... Decorated in the style of "Ladybug". And the eye is pleasant, and the kids are good. Let them jump from pot to pot - physically develop, rather than sit on them.

Now I will talk about crafts in other areas of our kindergarten.

An old paint barrel, fruit boxes, and a plastic bottle were useful for its manufacture.

Masha especially liked centipede, made of rusty buckets and cans. The legs are made from pieces of reinforced hose. The old children's sandals were also used.

But the highlight of our kindergarten is the part of the village courtyard, where piglets frolic in the mud, made from large plastic bottles. The fence is woven from branches. Sunflowers and flowers are also made from plastic bottles.

But the cool ones little men Boy and Girl made from ordinary logs. Old children's things, shoes, a board - a lattice from a crib came in handy here. An old basin was used to create an artificial reservoir.

"Chicks" are made from birch knots, and the beak and legs are cut from plastic bottle.

It is very easy and simple to decorate the garden by decorating ordinary river stones. In this case, we got such cool ladybugs.

Have you already guessed what these flowers and leaves are made of? Well, of course, from plastic bottles.

Since my work is wearing, I often visit different preschool educational institutions in our city and I want to say that not all of them have such original handmade works.

I will certainly talk about new crafts in the plots of other kindergartens.

Our family expresses great gratitude to the employees of preschool educational institution No. 163 in Cheboksary and parents for original design the territory of our kindergarten.

I hope you enjoyed the crafts described in this article. Perhaps you have found exactly these crafts for your preschool educational institution, where your child goes. Or do you want to decorate your country cottage area?

I would be sincerely grateful if you leave your comment.

If the family has small children, it is simply necessary for them to equip a playground in the country. Here they will play in the fresh air, giving parents a rest or minding their own business. And when you are free, you can always join them. The play area in the garden will become much more positive, brighter and more interesting if you use crafts for the playground. There are many ways to make them yourself, which we will discuss in this article.

To decorate a playground, it is not at all necessary to buy expensive garden decor. Self-made crafts will allow the site to look very original. It will be a unique children's corner that only you and your children have.

It is pleasant to make crafts on your own in all respects - materials for such creativity are abundant, and completely free, it is enough to use your imagination, creative imagination, and soon you will be able to please your kids. The work needs to start by choosing a place where the site will be located. A spacious place not far from home, where both sun and shade are present, will do.

A good cover for the site where the crafts will be placed - a sand embankment or lawn. It is necessary to keep the lawn clean, so that there are no glasses, sharp stones and sticks among the grass, so that children can play barefoot, as well as inedible berries. As you know, in childhood, we want to taste everything, especially what looks bright and attractive.

What can be used as raw material?

First of all, these are old tires. Nowadays, used tires literally take on new life- they make flower beds, swings and a wide variety of crafts for the playground.

The good thing about tires is that they can be crafted sports equipment... For example, such a tunnel, make a swing, dig into the ground at a distance, so that you can jump and walk along them

Today, not only boys, but also girls are delighted with cars. Such a chic car can be made from tires and a plastic chair. An easier option is to dig 4 tires into the ground and make a wooden seat

You can create amazing crafts from tires - funny bears (tires of different sizes, cardboard, old basin are used), bright tropical parrots. When painted, they seem to come to life and turn the playground into a corner of joy and positive

The tire must be washed and dried before starting the creative process. You can walk and jump on the tires dug while standing, you can attach planks on top, paint them, and make such "climbing frames" even more interesting. You can make a sandbox out of a large tire, but the options for creating various figures simply cannot be counted.

More ideas for arranging a playground in the country:

Bottle palms and a plastic zoo

Plastic bottles are also a very common craft material. The variety of their shapes and sizes allows you to create very interesting things - palm trees, flowers, figurines of insects and animals.

Exotic palms will bring any landscape to life, and it's not difficult to make them. There is enough material like bottles everywhere. It is not necessary to follow strict instructions, experiment, creating a tropical corner

It is very simple to make such a pig - use a five-liter bottle for the body, and a two-liter bottle for the legs. The ears from the tail are also cut out of plastic

Such a flower garden will not fade throughout the summer. Flowers - bottle necks, cut in the form of lilies and bells, leaves - bottles without a base, cut into 4-6 parts. Paint them with paint from the remote and place in the right place

Such crafts are notable for their practicality - they are not afraid of either rain or the scorching sun. To make a palm tree, cut the bottom of the bottles and string them on top of each other, insert a metal rod inside - this is the base of the palm tree. To create a "crown", use one or more bottles and cut them from the base to the neck into several strips - these will be the leaves. Then trim the cut pieces obliquely to resemble tough palm leaves. Insert this bottle with the neck into the "barrel". Brown bottles (trunk) and green bottles (crown) are used to create a classic palm, but it is not at all necessary to adhere to the classic norms.

Helpful: how to make garden figures for giving with your own hands:

Plywood figurines parade

Plywood is a great material for making flat, brightly colored figurines that will cheer anyone up. You can paint anything on plywood - your favorite cartoon characters, movie and book characters, and then cut out the figures and arrange them in the garden. The composition can be, it can be used as a fence delimiter for garden areas.

Figures in the form of characters from your favorite cartoons are always pleasing. To create Winnie the Pooh, a five-liter bottle is also used.

Plywood cat and mouse, surrounded by flowerpots with flowers, located on a soft lawn - a great place for rest and outdoor games for kids

Figures from polyurethane foam

Polyurethane foam is not a very familiar, but interesting material for creating crafts. Figures from it look like toys, look great and are very popular with children.

The polyurethane foam figures look ready-made. The site has a master class on making them, if you are interested, you can master the technique of making them

Hedgehogs and ladybugs from pebbles and boulders

Large pebbles - too suitable material... If you paint the rounded stones with bright colors, you get funny bugs, hedgehogs or other animals, depending on what your fantasy tells you. It's better to color them acrylic paints, and then cover with colorless varnish. Drawings with a clear outline look good. First, it is drawn with a pencil, then with black or white paint. Colored paints are applied between the contour lines.

Such a family of ladybugs will add positive to the children's corner. It is easiest to paint stones for bugs - a simple contour drawing is applied, and then bright contrasting paints and varnish are used

Material combinations - room for creativity

You can create interesting crafts from logs, combining pieces of wood of different sizes and different lengths. Combinations of various materials - tires and logs, tires and plastic bottles will not get bored at all, you can make such a playground that will be the envy of those who have purchased a ready-made for their garden.

You can create interesting lawns or flower beds in the shape of animals and insects, using bottles as a fence. Work with children, they usually have completely non-standard interesting ideas.

Funny crocodile flower bed - suitable decor for playground, made of plastic bottles (outline), eyes - plywood and plastic

If there was an old tree on the site that you cut down, do not rush to get rid of the stump. From it you can make such a great house with a door, a roof and windows. It will not only delight children, but will also be a wonderful decor for the site.

Zebras are made from logs and tires, mane is made of plastic. These are sports equipment and homemade garden decor at the same time.

To create the sun, plastic bottles and an old tire were used. The composition is very bright, positive, and easy to make. Bottle caps are nailed to the tire, then screwed to the bottle - the beams are ready

If you have materials left unused after building a house or arranging a garden, do not rush to throw them away. For example, pieces of bright ceramic tiles you can lay out paths, the space around the figures, or use pieces of broken tiles to lay out mosaics, images of various characters. Draw the outline of the figurine on the path and then tile it. If laid out on the ground or on the sand, such a mosaic will be short-lived, but laying out on cement mix will create an image for years. Rub the seams after drying and you will be delighted with the result.

Love for the garden can be combined with other hobbies. Country crafts from scrap materials are a good opportunity to embellish landscape design site and realize your own creativity. We offer several ideas with a master class, how to make crafts for a summer residence with a description.

7 ideas for country crafts. Photo

In the evening, it will be much more pleasant to be in your garden if the lighting is thought out. Of the used glass bottles and LEDs you can make creative lamps

Master class with a photo: garden crafts

A cute cat that can be used as a flower bed is easy to make from a large plastic bottle. To do this, you will need the following materials:

- cement

- plastic canister or bottle

- wooden slats

- dye

- wire

Now you can start making the frame so that your craft is stable. Secure the container to the frame.

Mix the cement slurry in a 1: 1 ratio, put on gloves and start shaping the cat's torso. To make bulges, take a handful cement mortar and a spoonful of dry plaster. Roll out balls or other blanks to make a beautiful cat. Together with gypsum, cement dries quickly, so it is easy to make even small details.

You can spend a lot of money on garden crafts, but they won't bring you the table as much joy and satisfaction as handicrafts. In order for a summer cottage or a backyard territory to fully reflect your taste and character, try to do it yourself. See photos and be inspired by new ideas.