Do-it-yourself repair of stretch ceilings after a cut. Repair of stretch ceilings: all ways to eliminate defects How to glue a puncture in a stretch ceiling

Stretch ceiling is a thin PVC film, so the surface is easy to damage with a sharp object. Rough handling can cause cuts and punctures. In such cases, the owners are worried about whether they will have to change the entire canvas. Fortunately, this is not necessary. In most cases, PVC foil can be glued. Let's consider in detail the most common situations and provide instructions on how to repair different kinds damage to the canvas.

What happens if you pierce a stretch ceiling

Holes and cuts are caused by impacts or other impacts from sharp objects. Often the cause is inaccurate movement of tools during repairs, for example, when installing a cornice or cabinet, or unsuccessful attempts to take out furniture, ski poles, billiard cues and other things with sharp edges. It is almost impossible to scratch or pierce the ceiling with a blunt object, even upon impact.

Cuts are easier on the film. The fabric is denser and more durable, but it can also be damaged. A hole forms at the puncture site. It looks sloppy, but nothing bad will happen. A cut is a more unpleasant injury, as it creeps over time under the influence of tensile forces. As a result, instead of a minor damage that can be easily repaired, a large hole is formed.

In case of a cut, you must immediately glue the stretch ceiling with masking tape so that the canvas does not spread further. Ordinary scotch tape is also suitable, traces after the completion of the repair can be removed with ammonia.

Sometimes other damage occurs:

divergence of the seam between individual canvases (the actions are the same as for a cut);
insufficient fixation, due to which the baguette moves away from the wall (additional strengthening of the frame will be required in this place).

In these cases, it is more difficult to fix the ceiling, but restoration work will cost less than a complete replacement of the canvas.

Is it possible to patch the hole yourself

If the ceiling was installed with your own hands, then it will not be difficult to glue it without the involvement of specialists, since you already have the necessary skills and tools. If you have no experience, then you can only repair small holes and cuts on your own. Anyone can glue a patch or decorative sticker. More complex repair methods, such as installing an additional lamp at the puncture site or overharpoing the canvas, should be entrusted to professionals. The same applies to serious damage such as tearing the film or detaching the profile from the wall.

Installation companies stretch ceilings are sure to provide a guarantee. Certain types of repairs are performed free of charge. As a rule, this is the elimination of problems associated with the shortcomings of specialists. Cuts and punctures caused by the careless actions of the owners or other repairmen are removed for a fee.

It is important to remember that any tampering with the ceiling structure (for example, installing new elements or partial dismantling) will void the warranty.

In cases where the installation was carried out by specialists, you must first find a contract and check whether the warranty period has expired. And if it's over, it's worth weighing the risks self repair, as inept actions can lead to more serious damage to the blade. It's cheaper to patch a small hole than a large cut.

What glue is suitable for a stretch ceiling

To repair a stretch ceiling, a compound is required that reliably fixes the canvas and does not damage the PVC film or fabric. Professionals choose the cyanoacrylate agent Cosmofen CA 12. It is a one-component adhesive that can be used on all plastics, rubber, leather and even metals. In the case of stretch ceilings, "Cosmofen" is used for such works:

harpoon connection;
repair of vinyl films and polyester fabrics;
gluing the harpoon to the PVC sheet;
installation of thermal rings, pipe lines and ventilation grilles.

Advantages of Cosmofen glue:

sets quickly, as it has high adhesion;
dries completely after 6 hours (at air humidity of about 60% and temperature + 20ºC, in other conditions the time may differ);
securely fixes glued surfaces;
does not harm health, as it is not toxic;
resistant to frost, heat and sunlight(used both in the house and on the street);
not susceptible to mold or corrosion.

Ways to repair a puncture or cut

First of all, the hole is sealed with masking tape. Further actions depend on the location and extent of the damage. Let's take a closer look at how to proceed in different situations.

The method is suitable for small cuts or scratches. For this, a piece of cloth or film left after installation is useful. This repair method has two variations. The easiest way is to glue the patch directly over the puncture. To repair a cut on a torn stretch ceiling, proceed as follows:

Cut out a piece of the desired size and shape from the canvas (so that the hole overlaps with a margin).
They are smeared with Cosmofen glue.
Applied to the ceiling and smoothed.

In this case, the patch will be visible. If the type of attachment allows, it is better to partially remove the canvas and glue the patch with inside and then tuck the harpoon back into the baguette.

Decorating with a sticker

If the patch cannot be hidden, good decision will turn it into a decorative element. The room will look unusual and interesting.

The method is suitable for:

canvases that cannot be re-mounted (with glazing bead or cam fastening);
holes of medium size (5-10 cm).

Reusable stickers for interiors that are sold in large stores goods for the home or building. The topics are very diverse: flowers, insects, animals, travel, landscapes, etc.

To close a hole in a stretch ceiling, you need:

Carefully remove the self-adhesive application from the white backing.
Attach from one edge to the ceiling near the cut.
Straighten the image with careful movements, slowly gluing it to the surface.

Make sure that there are no air bubbles. If this happens, the patch is partially peeled off and smoothed again. You can pierce the bump with a needle, but very carefully so as not to touch the canvas.

Advice! To make the interior look more harmonious and complete, several images are placed in different places.

If the cut is near the chandelier, there is another option. You can install a decorative rosette. For a stretch ceiling, choose a lightweight foam product.

Ventilation grill assembly

Typically, a diffuser is placed if a puncture or cut occurs in a corner. The size of the element is selected so that it is larger than the defect.

Stretch ceiling repair is as follows:

A plastic ring is glued to the canvas (the damage should be inside).
If necessary, cut the PVC foil additionally.
Insert the grate.

This method is suitable for all materials and types of fastening. The diffuser will provide additional air circulation. In addition to cuts, problems such as adhesion or sagging of the film are eliminated.

Installation of a spotlight

The variant is similar to the previous one, but more difficult to execute. Suitable only for ceilings with a harpoon attachment system, since you will have to partially remove the canvas. Additionally, you will need electrical skills.

Installation is carried out as follows:

From the side of the cut, part of the canvas is dismantled.
A mortgage is screwed to the rough floor in the place where the lamp will be located.
Lay electrical wiring and connect to the network.
Install the canvas back.
Glue the thermal ring, cut out the film and take out the cable.
Connect the lamp and insert it into the hole.

Peculiarities! It is not necessary to be limited to one light bulb, you can arrange them in a group: a straight or curved line, in the form of a geometric figure, etc. Such illumination helps to highlight a certain area.

Complete removal of the cut near the wall

This method is also used only for foil ceilings with harpoon joints. There is one more limitation - the distance from the hole to the wall should be no more than 15 cm.

The ceiling is repaired as follows:

Partially pull the harpoon out of the baguette at the cut.
Cut off the damaged area.
Re-glue the edge to the canvas in small steps of 2-3 cm.
This section of the film is heated and fixed in the profile.

It's okay that the canvas will have to be shortened a little. The vinyl film stretches well, with careful work after restoration, the surface will look like new.

What to do if the stretch ceiling is torn

This is pretty serious damage. Possible reasons cracks:

the incision was not sealed immediately and it parted a lot;
a lamp or a ventilation grill was installed inaccurately, there is no protective ring that does not allow the film to tear;
as a result of improper cutting, too strong a tension was obtained, due to which the blade cracked (this is possible only if a poor-quality film is used or the seams are poorly welded).

In such cases, you need:

Trim edges if they are uneven.
Glue the harpoon to both sides of the gap.
Install a special dividing profile on the ceiling at the junction (should be flush with the rest of the frame).
Insert the canvas into the baguette.
Decorate the joint with masking tape to match the color of the surface.

Any stretch ceiling is appreciated for its beauty and functionality, but even small defects on the surface are striking and reduce the aesthetic characteristics of the coating. Cuts, punctures and holes especially spoil the attractiveness of the stretch fabric. But repairing stretch ceilings after a cut, which can be done by hand, will help to solve the problem. The choice of repair method depends on the type of tension panel. V difficult cases to restore the ceiling surface, it is better to turn to professionals.

Causes of cuts

Before repairing a cut on a stretch ceiling, you need to understand the reasons for its appearance in order to avoid a similar situation in the future if possible.

Such a defect appears for the following reasons:

Most often, the repair of the stretch ceiling cut is performed after the installation of the cornices above window openings... Sharp cornice elements can easily damage the thin stretch film, especially if handled carelessly. To prevent this from happening, it is recommended to wrap the edges of the pipes with a soft rag.
Film ceilings are called seam ceilings, because the width of the canvas does not allow them to be installed in large rooms without welded seam. Sometimes this seam diverges, as a result, the defect in shape and size is very similar to a cut. The seam can be pulled apart by the tensile force of the coating or due to the impressive volume of water that has accumulated after flooding. In any case, the cause of the defect is a poor-quality seam.
Too active children's play can also damage the tension surface, especially if they play with swords, bows and arrows, and other toys with sharp edges. It is for this reason that it is advised to mount fabric canvases in the nursery, which are more resistant to mechanical damage than film ones.
A similar defect, similar to a cut, appears if a harpoon is torn off on a film web. In such a situation, the canvas simply bursts from the edge against the wall in the place where the harpoon is welded. At first, such a defect resembles a situation where the harpoon simply jumps out of the baguette, but if you look closely, you can see a torn cloth.

Unrepairable cases

When a cut appears on a stretch ceiling, only the master can say for sure what to do. Sometimes you can deal with the problem yourself, but this only applies to situations where the coating can be repaired. Unfortunately, there are times when no method will help solve the problem. In such a situation, it remains only to completely change the tension cover.

Before gluing the stretch ceiling after a cut, make sure that your case does not fall into the number of non-repairable defects:

If the size of the defect is significant, then it will not be possible to repair or mask it.
If the location of the site is not suitable for any of the repair methods. That is, you cannot pull the edge of the canvas to fill a hole in the baguette, or there is no way to install a ceiling lamp or other device.
In the event of a divergence of the weld seam, it will be necessary to completely dismantle the tension cover, because the seam can be re-welded only on special factory equipment.

Repair of cuts on tension panels

If you are interested in the prices for the repair of stretch ceilings, then they depend on the complexity of the work, the place of its localization and dimensions, therefore they are in the range of $ 40-50 (2600-3250 rubles). However, sometimes you can repair stretch ceilings after a cut with your own hands. Below we have provided a few instructions. It is important to choose suitable option taking into account the material from which the stretch ceiling is made.

Sequence of repair of PVC film coating

To choose a suitable way to repair a stretch ceiling with a cut with your own hands, you need to decide on the localization of the hole.

Depending on its location, there are the following repair methods:

If the hole is located at a short distance from the wall (no more than 15 cm), then the panel can be pulled tighter to fill the defect in the baguette. For this, the coating is released from the baguette in a small section. A part of it is cut off with scissors to the problem area. After that, you get a new edge, on which you need to attach the cord, wrap the canvas allowance around it and glue it. Thus, you get a homemade harpoon that needs to be tucked into a baguette. For refueling, you will need a spatula with rounded edges, as well as a heat gun, which will increase the elasticity of the material.

On a note! If the defect is located far from the wall, do not try to drag the canvas. This will ruin it completely. In this case, even preliminary heating of the material with a heat gun will not help.

The problem area in the central part of the room can be hidden by installing a ceiling lamp or ventilation diffuser or grill in this place. Before installing the device, the hole must be cut according to its dimensions; for this, the film is protected from creeping by gluing a thermal ring. This method suitable only if the length of the hole does not exceed the dimensions of the built-in device.
If a significant hole appears in the central part of the room, then there is only one way to hide it - by gluing an applique made of colored film. So you will not only hide problem area, but also embellish the ceiling surface, as well as diversify the interior of the room.
Sometimes a hole, similar to a cut panel, is formed due to the fact that the harpoon simply jumps out of the mounting profile. It is very simple to solve the problem - you need to fill the panel back with a special spatula. If the harpoon edge of the film is very thin, the area can be sealed with a cord. Otherwise, you will have to replace the wall molding.

If the ceiling was installed recently and it still has a warranty, then it is not worth repairing even simple cases on your own, because in case of unauthorized intervention in the ceiling structures, the warranties of the installer are no longer valid.

On a note! While waiting for the master, carefully tape the problem area with tape so that the hole cannot expand.

Repair of fabric

Now let's talk about how to glue a stretch ceiling from a fabric cloth.

The following methods can be used to repair polyester fabrics:

A small hole can simply be sewn up. For work, nylon threads are used, matched to the color of the coating. After that, it is recommended to paint the ceiling surface with a water-based emulsion to additionally hide the problem area. Note that you can re-paint the surface of the fabric ceiling about 5-7 times.
If the damage is significant, then a patch is used to repair it. After the installation of the fabric cover, there are always scraps of material, because after threading into the profile, allowances are cut off along the edge of the canvas. If you did not discard these scraps, then you can make a patch for repairing the ceiling from them. It will be of the same color and texture as the coating, so it will hide the defect well. The patch should be a couple of centimeters larger than the hole. It is glued to the back of the coating. Cyanoacrylic glue is used for gluing. After that, the patch is well smoothed and straightened.

On a note! If you do not have scraps of the canvas, then you can pick up a patch from another fabric that is suitable in color and structure. After such a repair, it is recommended to paint the ceiling to hide the difference in the tone of the materials used.

Tools for the job

The following tools may be needed to repair polyester fabric and PVC film coverings:

ladder;
sewing needle;
scissors;
a building hair dryer is needed only if Pvc film you need to make it more elastic in order to pull it well;
long-handled roller;
a special spatula for filling stretch coverings into a baguette;
paint tray;
ruler or tape measure.

Materials and adhesives for cuts

In addition to necessary tools the work will need the following materials and adhesive mixtures:

a patch of fabric (scraps of stretch woven covering or a suitable material);
glue for stretch ceilings (special glue for working with film canvases is suitable);
nylon threads of a suitable color (only for fabric coverings);
dense cord for strengthening the harpoon edge of the PVC panel;
glue based on cyanoacryl for gluing patches to woven panels;
water-based paint.

Repair video

The video will help you figure out how to repair a stretch ceiling with a cut.

Ways to decorate the damaged area

Sometimes it is possible not to repair, but to mask the place of the defect. This only applies to the ceiling, torn or cut in a place where you can hide a flaw or install a lamp, applique or ventilation grill in this place. In this case, you do not even have to use a hair dryer for repairs, because after decorating the surface will not sag and deform.

But if the installation of a luminaire or lattice is considered a more radical method, then various decorating techniques allow you to hide defects without interfering with the ceiling structures.

There are the following ways to decorate the cut stretch ceiling area:

In the case of localization of the defect near the base of the chandelier, this area can be hidden behind the ceiling stucco or other base under the hinged lighting device. Just do not use stucco from heavy materials, it is better to give preference to lightweight foam elements.
Coloring is also considered a decorating technique. But this method is only suitable for stretch ceilings made of polyester fabric. It is prohibited to paint PVC film.
Small holes can be sealed with a colored film applique. A scattering of butterflies or flowers on the ceiling will not only hide the defect, but also add originality to the entire ceiling surface.

There are different ways to repair cut stretch ceilings. Depending on the size of the defect, the place of its localization and the coating material, a decision is made on the choice of one or another method of repair or on a complete replacement. ceiling decoration.

Stretch ceilings are often used as a ceiling decoration, which have a lot of advantages - they look good, give good sound insulation, protect the apartment from flooding from above and do not require special maintenance. However, no matter how good the tensioning structures are, they also have drawbacks, and the main one is the extremely low strength of the canvas.

Of course, a good canvas can withstand stretching and pressure quite well, but the slightest touch with a sharp or angular object will leave a noticeable hole on the surface of the ceiling, which will expand over time. In such cases, the owners have a question about how to repair a cut on a stretch ceiling - and this is what this article will discuss.

Types of paintings

You can damage the canvas with a mass different ways- for example, careless movements during cleaning, or during any game. When determining how to repair a cut on a stretch ceiling, you need to take into account what kind of material was used as a canvas, so you first have to figure out all the materials that are suitable for these purposes.

All canvases are divided into two main types:

Tissue... This option is a polyester fabric that is impregnated with a special polymer composition. For the manufacture of fabrics, synthetic fibers are used, slightly diluted with natural threads. The thickness of such a web is on average about 0.37 mm. However, this article deals primarily with the strength of the material and the possibility of its repair. In this regard, fabric canvases are quite convenient - they practically do not stretch and have a porous structure, thanks to which it is quite easy to repair such material. Replacing the entire blade is only necessary if the cut size exceeds 30 cm.
Pvc... This material is based on polyvinyl chloride fibers. With a relatively small thickness (from 0.17 to 0.22 mm), the material has good strength. It can withstand temperatures up to +100 degrees, and when this indicator is exceeded, it begins to melt. In the event of sharp and significant changes in temperature, cracking may occur, as a result of which the strength of the fabric decreases. PVC fabric has good elasticity, allowing the material to be stretched if necessary. However, you should not overdo it with this - strong stretching and pressure on the film can lead to a change in its characteristics, and after repair it will turn out to be deformed.

Despite the similarity in composition and application, the materials presented have serious differences, which determine the repair methods suitable for each specific situation.

Causes of damage

As noted above, any canvas used for stretch ceilings initially has a fairly high strength - but it does not manifest itself at all when it comes to stabbing and cutting effects. The biggest danger a stretch ceiling can be exposed to is a normal cut. Even a small cut on a stretch ceiling violates the integrity of the canvas and leads to a complete deformation of the ceiling surface.

To understand how to eliminate a cut on a stretch ceiling, you need to handle it carefully, starting from the stage of its installation. However, in the process of operation, accuracy and understanding of the properties of the material is also required - so, for several days after installation, the material will adapt to new conditions, so you should refrain from any serious work in a room with a newly installed ceiling.

Most often, a cut on a stretch ceiling occurs for the following reasons:

During the installation, mistakes were made, for the arrangement of the ceiling, low-quality material was used, which, in addition, was also incorrectly cut;
Careless rearrangement of large furniture - for example, a cabinet with sharp edges that can damage the ceiling;
It is strongly not recommended to install stretch ceilings in children's rooms - any active games will sooner or later lead to accidental damage to the canvas;
Very often, the ceiling is damaged by accident due to careless handling of sharp objects in the room - for example, when further repairing the room, you can pierce the canvas with a screwdriver or cut it with a grinder.

There can be quite a lot of ways to damage the canvas, and as a result of such an impact, you will definitely have to figure out how to fix a cut on a stretch ceiling.

Temporary sealing of the ceiling

To make temporary repairs to a stretch ceiling cut, you need to prepare a set of materials and tools, which includes:

Masking tape or cloth tape;
Scissors, regular tape and a small piece of cable about 10 cm long;
A patch from the remains of a canvas;
Nylon thread, needle, varnish and paint;
Hair dryer and spatula.

This entire set is necessary for the initial, temporary sealing of the cut. The fact is that small cuts on the surface of the stretched canvas tend to gradually creep, therefore, first of all, it is necessary to take measures to localize the damage so that a further rupture of the stretch ceiling does not occur.

Small cuts on any canvas can be handled very simply - you just need to connect the edges of the cut with tape. To close punctures no more than 2 cm in size, you can use ordinary glue at all. This option will not be a panacea - it is only suitable as a temporary solution, and in the future you will still have to perform a full repair of the stretch ceiling cut with your own hands.

Film ceiling cut repair

The first step is to understand how big the cut in the stretch ceiling is. This is very important point- if the damage exceeds 15 cm, then the material can no longer be repaired, and it will have to be changed completely. You also need to estimate at what distance the cut is from the wall - if it is no further than 20 cm, then you can try to drag the canvas and hide the damaged area in a baguette.

In the latter case, repairing stretch ceilings after a cut with your own hands will look like this:

Antenna cable is glued directly over the cut;
When the glue is frozen, the canvas needs to be heated with a hairdryer;
The canvas is neatly pulled up to the baguette and tucked into it with a spatula;
Next, the material needs to be straightened and leveled to make it look like new.

You also need to figure out what to do if you cut the stretch ceiling at a distance from the wall. Under such conditions, you will have to use more complex repair methods that require detailed consideration.

Applying a patch

To make the patch, a piece of the same canvas that was used in the ceiling itself is used. The dimensions of the workpiece should be a couple of centimeters larger than the size of the damaged area. Such an amount of glue is applied to the patch so that its excess does not eventually protrude outward - it will be impossible to wipe them off the surface of the ceiling, and appearance designs will be damaged.

The patch is applied to the damaged area and pressed. Excessive efforts are not needed during this operation - folds will appear. The glued patch must be gently smoothed out after the glue has seized a little so that the surface is as flat as possible. At this, the repair of the stretch ceiling cut can be completed, or you can go even further in the desire to return the ceiling to good decorative properties.

So, in the future, you can apply a PVC application or some kind of drawing to the areas repaired with a patch. Individual PVC strips are quite suitable for use as patches - but you should always glue them not only over the cut, but also on entire sections of the canvas so that individual places do not stand out. The same goes for simple images.

Before removing a cut on a stretch ceiling, you need to choose the right glue option. There are no special requirements for the glue used. By and large, there are only two parameters - fastening quality and color. Most modern adhesives are colorless and perfectly hold the surfaces to be joined, so all such options are suitable for repairing stretch ceilings.

It is best to use the following types of glue:

Universal glue - reliable, strong enough and durable;
Specialized adhesive, which is divided into formulations for heavy, medium and light materials;
Regular superglue.

Mounting the ring for the luminaire

This method is only relevant for vinyl canvases. A special ring is glued to the damaged area, in which lamps are usually mounted. When the thermal ring is glued, a canvas is cut along its inner perimeter. If the damage is large enough, then nothing will have to be cut.

Using this repair method, you need to take into account that the luminaire will ultimately be mounted in the same way as any other lighting fixture on a stretch ceiling. Instead of luminaires, you can use a fake ventilation grill or smoke detectors to mask damage - they are installed in a similar way.

Repair of fabric stretch ceiling

It is much easier to work with fabric stretch ceilings, which is due to the rather stable structure of the materials used. To determine the repair technique, you need to figure out how great the damage is.

There are the following ways to repair a cut on a fabric ceiling:

The first method involves the use of nylon threads of the appropriate color. Having retreated from the edge of the damage by at least 3 mm, you need to pull the canvas. The finished seam must be treated with an acrylic-based sealant and a patch must be applied to this place, which will restore the texture of the fabric. After the sealant has completely cured, the repaired area can be painted or patterned.
On large lesions, the seam will be too noticeable, so it is best to use a patch that is cut from fabric or fiberglass. The patch is glued to its place with glue. You need to glue the patch from the inside of the canvas, and when installing the patch, you do not need to put too much pressure on it so that the ceiling does not sag after the repair. In the future, it will be possible to cover the material with water-based paint - it will mask all traces of repair.
Under suitable conditions, you can use a thermal ring for repairs. Damage repair technology looks exactly the same as in the case of film ceilings.

Possible defects

Illiterate conduct renovation works in the overwhelming majority of cases, it leads to the appearance of new damage. Of course, even in the most difficult cases, there are options for solving the problem, so you need to first assess how much the ceiling is damaged.

There are a number of defects that cannot be dealt with:

The canvas, which has completely dispersed at the seams, will have to be completely re-tensioned - gluing in this case will not help;
If the ceiling comes off the wall, then the canvas will have to be pulled over, and the structure of the stretch ceiling will have to be strengthened;
If only one baguette has come off, then it can be carefully attached to its place without touching the canvas.

To make the stretch ceiling as reliable as possible, when installing and repairing it, you should follow a number of recommendations:

In order for the patches to better hold in place, the areas to be repaired must first be degreased. For these purposes, a special spray or mild detergent is suitable.
You need to understand what to do with a cut on a stretch ceiling. If you notice a cut, you must immediately take measures to prevent its expansion - for example, fastening the edges of the blade with tape.
On a ceiling with a photo print, it makes sense to remove a cut only if it will not be noticeable after repair. If the drawing is deformed as a result of repair work, then the most expedient solution would be a complete replacement of the canvas.
The air temperature in the room must correspond to the permissible for a particular material (as a rule, the temperature from 0 to 50 degrees is quite comfortable for the canvases).
If the room is humid, then it will be necessary to regularly remove the rust. A flannel cloth and a non-abrasive glass cleaner are best for cleaning the blade.
Spotlights installed in a stretch ceiling must have the permissible power. For fabrics, conventional lamps up to 60 W and halogen lamps less than 35 W are suitable. At the film canvas, the power threshold is lower - incandescent lamps can have a power of no more than 40 W, and halogen lamps - up to 20 W.
In order for the repair to be of the highest quality, it would be best to turn to professionals who will find and implement the optimal solution to the problem.

Conclusion

Repairing a stretch ceiling with a cut is a completely feasible task, available for independent execution. Before repairing a stretch ceiling from a cut, you need to assess the extent of the damage, take into account the characteristics of the canvas, and only then take appropriate measures to eliminate the problem. Correct execution of such work will allow you to restore the ceiling and return it to its original appearance.

Many people know firsthand about the beauty of stretch ceilings. But, like everyone else in this world, they are not immune to harm. Unfortunately, you can spoil them if you don't intentionally. In this case, you need to know how to repair a cut on a stretch ceiling? This will be discussed in our article.

How do cuts appear?

Although the material used in tensioning structures has exceptional strength, it can also tear. Most often this happens during the operation of the ceiling. Knowing the reasons why a hole or cut may form on it will help to avoid such a nuisance.

This usually happens in the following cases:

Elimination of damage

For whatever reason the gap occurs, you will have to fix it. There are several options for how to repair a cut in a stretch ceiling. They will differ depending on the type of stretch ceiling.

Even the most perfect coverage is not immune to harm

Seamless fabric ceiling

There are several options for repairing a seamless textile ceiling:

If you accidentally damage a fabric cover made with a continuous canvas without a seam, then you are very lucky. When the hole is tiny, it can be sewn up with a nylon thread. After that, the place of damage must be masked with paint.
In the case when the hole is large, it will be difficult to sew it up with threads. Such repairs will require a patch or piece of fabric. Their color must match the color of the damaged coating. However, this is not of fundamental importance, because the repaired place will subsequently be painted over with paint.

Bond the patch to the back of the canvas using any transparent glue (cyanoacrylate glue is ideal). Smooth the fabric gently. Make sure the edges of the cut are perfectly flush with each other and with the glued patch. Paint the repaired area so that the paint matches the color of the base as much as possible.

On a note! The patching method is quite simple to implement. The main thing is to glue it correctly and do it very carefully, then the damage will become absolutely invisible to the eyes.

The safest option for damage is a hole near the wall

PVC film constructions

For such ceilings, the location of the damage is important, for example:

The hole was formed near the wall (less than 15 cm). In this case, the film is taken out of the guide profile, cut along the rupture line, after which the web is re-tensioned and inserted into the same profile.

Do not attempt this type of work when the damage is more than 15 cm from the wall. So you risk completely ruining the entire finish.

Important advice! Do not repair the ceiling yourself when a specialized company or firm was engaged in its installation. You will thus lose all warranty benefits. In the future, you may have other problems, for example, there will be complaints about the installation of the frame or the quality of the film, then you will have to pay for the alterations from your wallet. All that can be done in this situation is to seal the cut with masking tape. Then call a specialist for repair as soon as possible.

The damage appeared at a considerable distance from the wall. How to repair a cut on a stretch ceiling in such a situation? In place of the hole, you can install another lamp or ventilation grill.

On a note! Any cuts or holes that appear in this type of finish must be reinforced. If this is not done, the film will tear. To strengthen the holes for the lamps, a plastic thermal ring is used, which is glued to the film with a special glue. Then a hole is cut along the inner perimeter of the ring for further installation of the lamp, ventilation grill or chandelier.

A chandelier can be installed at the cut site

Film tear has big size... Typically, such damage requires a complete replacement of the blade, but other solutions are possible. For example, you can stick an applique on this place or use a multi-colored film. So you will not only repair the ceiling, but also bring a fresh twist to the interior.
The seam is cracked. Such a nuisance can happen for two reasons: poor quality material or problems with its installation (it will overtighten). In any case, you will have to completely replace the canvas, since it cannot be repaired. If you have a guarantee from a company that carried out installation work, then you need to contact her. When performing work on their own, try changing the film manufacturer.
The film tore near the wall at the point where the profile was lagging. These are the costs of poor profile attachment, which are fairly easy to eliminate. In this case, the film is dismantled, and the low-quality profile is replaced with a new one. It must be carefully secured, and then the material must be inserted into its original place.

You have familiarized yourself with all the ways to repair a cut in a stretch ceiling. When other types of damage occur, they require a complete blade replacement. Therefore, it would be wise not to overestimate your strength. It is better to immediately contact the specialists, then you can have the rights to warranty service of the structure.

Films for stretch ceilings are resistant to bending and stretching, but they are easier to cut or puncture. This incident happens not only during editing. During operation, all sorts of violations of the integrity of the canvas may also appear, requiring repair of the stretch ceiling.

Stretch ceiling is a suspended structure with a film stretched on it. This material visually appears to be durable and sturdy. However, this is a misleading impression. The film must be handled carefully and carefully. But only installers who work with this material every day know about this. Consumers, on the other hand, do not attach due importance to the rules for operating a stretch ceiling.

Most common reasons film damage:

the formation of stretch marks and holes during skidding, removal, assembly of furniture;
cuts and holes during the installation of interior and entrance doors, devices for slopes and platbands;
the release of the film from the baguette due to inaccurate replacement of lighting fixtures or other actions;
stretching the film and its exit from the baguette during flooding from above;
cuts and punctures of the canvas due to too active children's games with tossing sharp-angled objects.

For stretch ceiling owners, it is important to know what actions can lead to damage to the film. But everything cannot be foreseen. In most cases, certain troubles with a thin film cannot be avoided. And here knowledge about how repair stretch ceiling.

Types of damage and ways to eliminate them

In order to most fully represent the scale, labor intensity and financial cost of the upcoming work, we will consider how to repair stretch ceilings in each specific situation. There are several problems requiring attention:

a cut;
hole;
exit from a baguette or other attachment;
melting or burn-through;
stretching;
puncture.

The stretch ceiling to be repaired must be properly prepared. If eliminated a cut, the edges of the canvas are pulled and glued. If this hole, it will take creativity, which often requires cutting the film. Each type of action will need its own materials and tools.

Ways to eliminate cuts

Stretch ceiling cut repair- the task is not difficult, but it requires accuracy and precision of movements. The way to solve the problem depends on where the cut is located: not far (no further than 30 cm) from the baguette, or at a considerable distance from it.

If the cut is next to a wall

The edge of the film opposite the problem area is removed from the baguette. Then take out more 20-25 cm of film on the left and right... It is found that its edges are wound into a harpoon, a strong elastic strip, which is inserted into the baguette.
With a sharp knife (preferably a clerical one), cut the film along the bottom (back) of the harpoon. That is, they cut it off, the so-called, "Skirt".
Smooth, gently sloping line cut off a place with a defect.
Apply glue to the harpoon and gently, evenly glue the canvas to it. This is how the cuts are sealed on stretch ceilings, where the problem area is at the baguette.
Next, using a regular hair dryer heat the film, stretch it, tuck it into a baguette... For refueling, you will need a spatula, the blade of which will have to be made blunt and rounded.

If the cut is far from the wall

Repair of stretch ceilings after a cut away from walls requires a piece of film, similar to the one that is stretched. You will also need glue and scissors... The visual flaw of the canvas can be eliminated only by the overlay method. patches... So you have to cut and glue. There is no other way to repair stretch ceilings after a cut with your own hands.

The result of the work may not please. But this problem can be solved. Today, there are many different, beautiful and lightweight accessories for decorating walls and ceilings on sale. Some of the most popular are spectacular butterflies... You can choose the one suitable for the interior design and glue it to the patch.

We figured out how to remove a cut on a stretch ceiling. Now you need to understand what kind of glue to use in your work.

Types of glue for repairing stretch ceilings

Experts from manufacturers recommend stopping your attention on adhesives lines COSMOFEN or COSMOPLAST, and only with their help to restore the stretch ceiling, repair cuts and eliminate holes. The most suitable for these works are COSMOFEN CA 12 and COSMOPLAST 513, 500 , 500L.

The first one (COSMOFEN) is designed for use by window plastic installers. The COSMOPLAST series allows you to choose the glue that is most convenient in terms of hardening time. This is a very important point, since the speed of work is different for everyone.

For those who are leisurely and focused on quality and accuracy, the COSMOPLAST 500 or 500L... Their solidification time 3 and 4-5 sec respectively. If the work needs to be done quickly, but with possible further adjustments, it is recommended to use COSMOPLAST 513, the setting time of which is about 15 sec... Enough to fix something.

Craftsmen who repair a stretch ceiling successfully remove a cut using inexpensive types of glue. They consider one of the best "Contact", and recommend for beginners to use it. With the help of this glue, it is most convenient to repair stretch ceilings with your own hands. "Contact" is absolutely transparent, quickly grasps, but there is time for correction.

Ways to eliminate film breaks

Film tear can cause different consequences. The hole may be small, with a barely hanging edge of the canvas. Or it can be huge, curvilinear, with stretched edges. Each case has its own approach to eliminating the defect.

Method number 1

Repair of a hole in a stretch ceiling can be performed using a needle and thread of the appropriate color... That is, the film should simply be carefully sewn up. The seam seems terrifying only up close. From the height of a person standing on the floor, the problem area is not so noticeable.

This method will help not only in cases with small gaps. Often, in the elimination of large holes, it is required to grab the edge of the canvas and fasten it with threads in the right place. Further, they carry out the work that is required by the technology.

Method number 2

We have learned how to glue a stretch ceiling. This skill is also useful for fixing more serious defects. As it was said, this process is creative, requires imagination and ingenuity. In general terms, the technique for restoring the integrity of the film is as follows:

using a needle and thread, grab the edges of the canvas in 2-3 places so as to pull the film as accurately as possible;
the hole in the stretch ceiling will remain, but now, after fixing the edges, they can be carefully glued together at the break points.

It's not a quick job, but it's worth it: you don't have to buy a new canvas. And in the future, if a hole is formed in the stretch ceiling, what to do with it is already clear. Apart from glue, scissors and thread with a needle, nothing is needed. Only patience and accuracy. Experience is never superfluous, you can teach your friends how to remove a hole in a stretch ceiling.

Ways to eliminate film defects after the flood

Beloved neighbors sometimes bring surprises, and more often, unpleasant ones. When flooded from above the scale of the problems depends on where and how the canvas is fixed. If it is attracted to the main (concrete) ceiling using pads for lighting fixtures, hangers for a metal profile, or in another way, water will accumulate in the grooves between the fixing currents.

This is good and bad at the same time. The plus is that the film will not stretch too much, and it will not need to be changed to a new one. The downside is that to drain the water, you will need to alternately unscrew and remove all the elements holding the film.

If the film is only fixed around the perimeter of the room, the degree of stretching depends on the amount of water that has penetrated from the upper floor. In this case, by doing a small hole in the baguette, the water is drained. After that, no large-scale repair of the stretch ceiling is required. Do-it-yourself cut is eliminated in any convenient way. In some cases, simply tucking the harpoon back into the baguette is sufficient.

Important! Before carrying out work, it is necessary to de-energize the room.

The sequence of actions to eliminate the consequences of flooding from above:

turn off the machines on the switchboard;
prepare containers: buckets, basins, deep pots;
take a screwdriver and unscrew the fasteners holding the ring or mortgage;
hold the ring, pressing it to the ceiling, and bring a bucket or other container to this place;
drain the water.

It is advisable to perform this task with an assistant who will bring the containers and move the “bubble” in the canvas to the place where the water is drained.

If the film is fixed around the perimeter of the room, you need to choose a place where it will be most convenient to drain the water, and remove the harpoon from the baguette at a distance of 15-20 cm... This can be done with a spatula. You need to work with this tool extremely carefully so as not to damage the canvas.

Method of removing sagging film

Sagging of the film can only be eliminated by using it stretching and filling in baguette... To do this, you will need to familiarize yourself with the technology of installing stretch ceilings. Next, trim the film, as in the case of removing cuts that are close to the walls of the room.

Method to eliminate film burn-through

If the canvas is accidentally burned, you get an unsightly hole with dark edges. They remember how to patch up a hole in a stretch ceiling, and perform this task. To eliminate a small-sized defect, you can choose the method of patching or decorating with overhead accessories: flowers, butterflies, stickers.

Useful video

In the video, let's see an example of repairing a stretch ceiling puncture:

Repair and installation of stretch ceilings is a difficult and time-consuming process. Therefore, it is recommended to follow the rules of operation of these structures, unstable to mechanical damage. When cleaning or rearranging furniture, do not forget that in our small apartments the ceilings are low and therefore vulnerable.

Did you like the article? Share it

Print article