What material to buy a kettle from? What are teapots made of? Enamelled water heater.

How nice it is to sit comfortably with your family and have a cup of freshly brewed tea. In ancient times, large shiny samovars were used for such tea parties. But in modern world they went to the shelves of antique dealers, and kettles came to replace them. In our article, we will find out what a kettle should be for gas stove and consider well-known brands of manufacturers.

How to choose a kettle for a gas stove?

To choose a convenient, high-quality, and most importantly safe kettle for a gas stove, you need to know a few rules for choosing a product.

Teapot lid

It is worth paying special attention to such an important moment as fixing the lid. Most modern kettle models involve the use of lid plates that do not fit in the sinuses. The use of such dishes can be traumatic, since under the influence of high pressure of hot steam, the lid can fall off and cause burns. Teapots with a tight lid are the best option for every day.

Kettle handle

Also pay attention to the teapot handle. It should be made of heat-resistant plastic that will not heat up when boiled. Many unscrupulous manufacturers replace expensive raw materials with a cheaper rubberized analogue. It feels comfortable, of course, but at a heating temperature above 70 degrees, it will begin to heat up and melt.

The handle of teapots made of wood has low thermal conductivity, but tends to dry out and deform.

Kettle bottom

The bottom of teapots designed for gas stoves is different from other types. As a rule, thick steel or even cast iron is used to make the bottom of the cookware. Thanks to these materials, an even temperature distribution occurs and the water is heated faster. In addition, the thick bottom of the kettle cools down much more slowly.

Should you choose a whistle kettle for your gas stove?

For the daily rhythm of life, it is recommended to choose a kettle model with a built-in whistle. As a rule, it is installed in the spout of the product and with a characteristic whistle notifies you about boiling water. The whistle is due to high pressure hot steam through a small hole in the valve. This feature allows you to go about your business and not have to wait for the kettle. Please note that the water should not be poured above the required mark. Otherwise, when heating and expanding, water will get inside the whistle and there will be no characteristic sound.

Types of kettles for a gas stove

On today's market, there are a huge number of types of kettles for gas stoves, made of a wide variety of materials. Let's consider what are the advantages and disadvantages of each of them.

Enamel teapot

The most popular teapots are enameled. Products made from this material have an ergonomic shape and a variety of designs.

What are the advantages of an enamel teapot?

The main advantage of the enamel teapot is environmental friendliness. Such a coating is absolutely harmless and does not impart extraneous tastes and impurities even with a long stagnation of boiled water. Also, teapots with enamel have a fairly large volume, which is especially important for large families. Due to the special type of coating, the temperature of the water after heating or boiling decreases more slowly than in dishes of other materials.

Cons of a teapot with enamel

Unfortunately, enamel teapots have a number of disadvantages. The main disadvantage of this product- fragility. Over time, under the influence of temperature, the enamel can crack and flake off the outside of the cookware. Impacts and aggressive cleaning with abrasive cleaning agents can also lead to this. The enamel coating is afraid of a sharp drop in temperature, so you should not light a fire directly under the dishes. First turn on the gas stove, and then put the kettle on the hotplate. Otherwise, black spots may form on the enamel, which will be problematic to remove without effort.

enameled kettle for gas stove

Glass teapot

Glass teapots have been gaining in popularity lately. Having unusual shapes and design, it will easily fit into even the most sophisticated interior.

What are the advantages of glass teapots?

High thermal conductivity of glass ensures uniform heating over an open fire. In addition, teapots made of this material are generally attractive for their transparency. You can watch the water boil and even brew tea in it. Especially effective is the use of rolled or budded tea, which, when brewed, opens up into herbal compositions.

Cons of a teapot made of glass

Of the disadvantages of glass teapots, it is worth noting that they are quite fragile and their use should be extremely careful. It is important to choose well-known brands of glassware manufacturers, as you run the risk of running into a fake and injuring yourself with a low-quality product. If your water contains lime impurities or you do not filter it before boiling, you should pay attention to the fact that over time, a small deposit will form on inside teapot.

glass teapot for gas stove

Steel gas stove kettle

As a rule, in the manufacture of a teapot from steel, a special anti-corrosion coating is used or, as in the common people, a stainless steel.

What are the advantages of a steel kettle?

The indisputable advantage of a teapot made of steel is the absence of toxicity. Stainless steel not only does not emit any harmful substances, but also does not react with impurities contained in water. Also, steel teapots are among the most durable and will not corrode with chemical and alkaline cleaning agents.

Disadvantages of a stainless steel kettle

Unfortunately, a stainless steel kettle quickly forms scale on the inside of the bottom. To avoid this, it is recommended to boil a kettle with vinegar or citric acid once a week. Also, small drops of water or condensation forms small but unaesthetic smudges on the mirror surface. Try to rub the surface with a microfiber or felt cloth after each use.

steel kettle for gas stove

Ceramic teapot

For the manufacture of a ceramic teapot, natural clay is used. Under the influence of firing, this material acquires strength, then it is covered with a polymer heat-resistant varnish.

What are the advantages of a ceramic teapot?

A ceramic teapot can be safely called the most natural in composition. Such a product does not emit synthetic impurities and retains the taste and temperature of water for a long time. Most manufacturers of ceramic teapots colorfully decorate the outer part of the tableware, stylizing it with painting. In addition, the varnish coating can be perfectly cleaned even with abrasive agents.

Disadvantages of ceramics

Despite the perceptible weight of the ceramic teapot, this product is rather fragile. Over time, cookware made of this material can crack under the influence of an open fire from a gas stove, therefore everyday use is not recommended. Also, the ceramic material of the kettle is inconvenient for its low heat conductivity, so the process of boiling water will take much longer than usual.

ceramic kettle for gas stove

Cast iron teapot

Manufacturers have long abandoned the use of cast iron for the manufacture of teapots. The costly process of processing this material does not pay off in consumer demand.

Advantages of a cast iron teapot

A significant advantage of a cast iron kettle is its durability. Cast iron alloy is not only able to serve you for decades, but also retain its original appearance. Also, it retains heat very well, and water cools down much more slowly. The outer part of the product is easy to clean and does not get scratched.

Cons of a cast iron teapot

Despite all the advantages, cast iron teapots have no less significant disadvantages. These include the tangible weight of the product, which is not particularly convenient with constant use. And despite all the strength of cast iron, moving elements can collapse under mechanical stress. Basically, these are the bases for attaching the handle.

cast iron kettle for gas stove

Aluminum kettle

Aluminum teapots were especially popular in Soviet canteens and field kitchens 20 years ago.

What are the advantages of an aluminum kettle?

Aluminum is a light metal, so teapots made of it are convenient to use. Also, this material is quite cheap, hence the insignificant production costs and low cost. Due to the high thermal conductivity of the aluminum body of the kettle, water boils quickly enough.

Disadvantages of an aluminum kettle

The most important and dangerous drawback is toxicity. An aluminum kettle is capable of not only forming and oxidizing various heavy metals, but also changing the taste of water during long-term storage. Also, despite the predominantly rapid heating, aluminum also cools quickly. Design solutions for an aluminum alloy kettle are not provided and do not even have a ceramic coating. This is another additional disadvantage, since such a product will look rustic for an interior or as a household utensil. Due to the "softness" of aluminum, the teapot is more susceptible to deformation than any other material. Even a light impact on the table or sink will create a small dent, which will be quite problematic to fix.

aluminum kettle for gas stove

Manufacturers of quality kettles for gas stoves

There are more than 200 kettle manufacturers successfully on the market today. Let's consider the most popular brands.

Brands of metal teapots

The brands of metal teapots presented below have been producing their products for a long time and have already been able to establish themselves as one of the best.

Vitross enamel teapots

Vitross, a manufacturer of enameled tableware, has been producing its products in Russia for over 10 years. Branded heat-resistant enamel for teapots coating provides resistance to mechanical and chemical influences, which allows you to wash products even in dishwashers.

Metrot stainless steel kettles

The Serbian brand Metrot is popular not only in Russia, but also in Europe. Thanks to the patented steel polishing technology, teapots of this brand are quite resistant to mechanical stress. Even when cleaning the surface with a wire brush or abrasive agents, the integrity of the polish is not compromised.

Cast iron teapots Iwachu

The famous company specializing in the manufacture of cast iron teapots has existed for over 60 years. The Iwachu company was founded in Japan, where the traditions of the tea ceremony are observed and honored to this day. For the production of cast iron cookware, the factory uses only high quality raw materials and handles the products. The ornament is also knocked out on a hand press. It is worth noting that the maximum volume of Iwachu teapots is only 0.7 liters.

Copper Teapot Manufacturer Sri Ram Export

The world famous Indian manufacturer of copper products Sri Ram Export specializes not only in decorative items, but also in tableware, including teapots. Distinctive feature inherent in this brand is the high quality of manufactured products and original author's designs. The volume of teapots admitted by the Indian factory is 3 liters. Products with a smaller volume are made to order.

Kamjove glass teapot manufacturer

One of the most popular manufacturers of glass teapots is the Chinese company Kamjove. This factory produces products from heat-resistant raw materials, which allows the use of products over an open fire. In China, it is customary to prepare tea at a time, therefore, the maximum volume of teapots produced by this brand is 1.5 liters. The glass stand included in the tea set allows you to use the product not only for boiling water, but also for brewing tea.

Regardless of the material from which the kettle for the gas stove is made, the guarantee of a long service life and the proper appearance of the product depends in part on proper care behind him.

The very first question a buyer should ask himself when choosing an electric kettle is what material to choose for his new household appliance? Yes, that's where we'll start, with the materials. Basically, three materials are popular on the market and their modifications and combinations are: plastic, metal and glass.

Plastic electric kettles, the most popular models among all. Indeed, now, in the age of plastic, this is the most optimal material, both in terms of price, availability and characteristics. What kind positive sides plastic? Firstly, plastic is durable, although over time the appearance deteriorates more than in teapots made of glass or metal. Secondly, such teapots are strong, it is difficult to break and deform them, if it is not a cheap fake. Thirdly, plastic is a unique material for creating any design. Plastic electric kettles can be of any shape, color and texture, so it will not be difficult to fit such a model into every kitchen interior. These are positives, but there are also negatives. The most basic is environmental friendliness. Plastic itself can react with liquids, and when heated, this process is further enhanced. Remember, medicines are still sold in glass bubbles, although they are more expensive. But there is no need to thicken the colors like that, teapots are made from environmentally friendly materials and when choosing a device from a well-known brand, you will not have to feel the taste of plastic. Speaking of health, even fakes are unlikely to lead to disease, unless you just feel a slight taste from the plastic and its smell when boiling. So, to sum up, plastic is good decision, such kettles are the most popular and affordable, which means it is worth buying plastic electric kettles.

Further about metal, on an environmental basis, this material is better than plastic, although the taste of metal is also felt a little, but iron is useful. In terms of durability, metal models of teapots are also a good choice, they will last a long time, if not a whole life (the case is definitely eternal) and will always look new. In terms of strength, similarly, metal is a strong solution and it will be harder to break such a device than its plastic counterparts. As for the design, there is little choice on the market, but there is, moreover, there is a combination, that is, the metal kettle will be covered with plastic, which will give the same advantages as in plastic appliances. These are all positives, but now negatives are everywhere. Firstly, metal electric kettles get very hot, which is unsafe in the case of children. Although in a plastic shell, such a kettle will not burn. Secondly, metal teapots are more expensive, which is a weighty factor for many. Thirdly, metal is heavier than plastic and this kettle with water will weigh at least 3 kilograms. You can also mention that if the kettle is covered in metal, the water level is not visible. When there is a level, leaks may be present in metal appliances. Therefore, it is not worth choosing such models on the market at a low price from an unknown manufacturer. Due to the difference in thermal expansion of plastic and metal, a leak may indeed appear, which was found in some models of even popular companies. Fourthly, metal electric kettles are very noisy during operation. As a result, teapots made of metal, with good choice, will be no worse than plastic electric kettles, and even better. In any case, they are stronger, more environmentally friendly and more durable (we mean the case).

Teapots made of aluminum alloys in terms of consumer indicators are close to those made of stainless steel.

Glass, as already mentioned, is the most environmentally friendly product, therefore, from this point of view, such teapots are ideal for health. In terms of beauty, glass models are also very interesting, but still this is a matter of taste. As a result, there are many positives and it is better to say only about flaws. Glass teapots, like metal, get very hot and can burn you. They are also fragile and easy to break. But if the glass teapot is decently protected in plastic, then these two main disadvantages disappear by themselves, leaving only their positive sides. The only thing is that there are very few glass electric kettles on the market and the choice here comes down to just a few models.

What is the result of the selection based on the material? It's simple, we weigh all the factors and choose the best for ourselves. And in each case, the choice will be correct, since this is just an individuality, and it is simply impossible to predetermine for any one material for a teapot.

Distribution by cost depending on the material (from cheap to expensive):

1) Plastic

3) Stainless steel / aluminum

4) teapots-thermoses with an inner flask made of stainless steel and a plastic outer casing.

2. Heating elements.
We come to the second factor - selection based on the heating element. Please note that exactly the way our thought goes, the buyer should think for an effective, fast and the right choice electric kettle. And when you have decided on the material, you need to decide on the elements for heating the water. Kettles based on this factor are of two types: with an open and a closed heating element. Let's consider each of these types individually.

The most popular nowadays are teapots with a closed heating element, otherwise known as a disc. If we look inside such a teapot, we will not see anything there except the metal bottom, this is the very disc. The majority of these models will be in the store, and this already speaks of the good qualities of this type of teapot. But the positives of heating elements are quick and easy to point out and you can't, they just do their job well, period, we'd better point out the negatives of each type. The first negative of electric kettles with a closed spiral is the increased noise. The second negative is that they are a little more expensive. Two negatives, the only and the largest, although it is clear that you can survive them, because the noise is not much higher, and the price is not much higher.

Kettles with an open heating element, or more popular to say with an open spiral, this is a less successful version of electric kettles on the market. There are more negatives here, firstly, the spiral has an irregular shape and covers the bottom, which does not make it possible to clean the device well from scale. Secondly, the spiral is located at a certain height from the bottom, which means that it will be completely closed only with a large volume of water, that is, it is contraindicated to turn it on with a glass of water. In comparison with disc kettles, moreover, with heating regulators, here even 100 g can be boiled or heated. The third negative of such teapots is that the water heats up a little slower here, and all this is due to the small area of ​​contact between water and metal.

As you can see, the choice is obvious, it would seem, but still there is not much difference between the first and the second, and by buying a teapot with an open spiral, you will only lose a little in quality, but you will gain the same little in price. And when correct operation both kettles will work hard and for a long time.
3. Such a small trifle as a stand.
Before moving on to other important factors of choice, we think that we must say more about such a trifle as a stand. They are of two types: pirouette and regular. "Pirouette" is a central round contact, this is the most popular type now. A common stand, and once quite popular, is a stand with a side contact and a rectangular shape. As practice has shown, the "pirouette" stand is more practical and durable. Here the kettle can stand in any position, it is convenient for both right- and left-handed people to take it. Here is such a small trifle, which is also worth thinking a little about.

The power cord is connected to the stand and does not interfere with the removal of the kettle. The stand provides a pocket for storing the power cord. The length of the power cords for kettles is from 0.6 to 1.3 m. A long power cord can be dangerous: it can get caught or damage the insulation. Therefore, do not lengthen the power cord. It is better to find a comfortable place for the kettle near electrical outlet
4. The volume of the teapot.
And here we come, for many, to the most important criterion of assessment. Most pay attention only to this (and to the power), which is not correct. After all, the quality and durability does not depend at all on the volume, and there is nothing to choose from. You just need to count how many family members you have, how often you drink tea, and in general remember how much water you heat up during lunch or dinner and that's it, the choice will become clear.

It takes a few seconds and a very small amount of electricity to boil the minimum volume of water. This indicator is the lowest for metal teapots, worse for glass, and even worse for plastic ones with an open-type heating element.
Who wants numbers, say, teapots come in different sizes, from 0.5 liters. up to 4 liters, the popular volume is 1.5-2 liters, which is quite enough for a large family. The volume of 1.7-1.8 is ideal, and there are many such teapots in stores.
5. Power.
The second criterion, which is also very significant for most, is the power of the electrical appliance. We'll say that you shouldn't think about it a lot, most kettles have a power of 2-2.5 kW and that's enough. We remember that the boiling speed depends on the power, and the speed, the manufacturers, in any case, try to increase it optimally to the maximum. The difference between boiling 2L electric kettles. and with a power of 2 and 2.5 kW, it is small and you should not chase after large numbers. The ideal solution is a power of 2-2.2 kW, which is on most models with a volume of 1.5-2 liters. Whoever buys a kettle with a capacity of 2.5-3 kW can get, in addition to fast boiling, permanent shutdown of "traffic jams". And if you take into account the included electric stove, refrigerator, then not every kitchen wiring will withstand such loads. Be careful with the desire to get a powerful kettle, it can lead to a fire.
6. Filters.
When we have already decided on the power, volume, body material and the type of heating element of the future kettle, we think about filters. This is especially important if the water in your home is not very clean. Modern electric kettles are of two types: with 1 or 2 filters. It is very rare that there are no filters at all, such kettles can only be found on the market at a very, very low price. One filter, which is located in the neck and prevents scale from entering the cups, should always be present. The second filter, which purifies the water as it enters the kettle, is already a matter of taste. It is clear that the models with a double filter are much more expensive. And if this is a high-quality filtration system for incoming water, then in general the prices are very, very high, like for an electric kettle. Your health is up to you, although with normal water there will be enough kettle in one filter. And if the water is filtered, it’s better on the links “faucet and central water pipe”.

When boiling water in any kettle, scale forms, even when using a gilded heating element. Filtered water does not help either, since household filters retain only solid particles and do not catch dissolved lime. Scale degrades the quality of the water and causes it to become cloudy. It can lead to premature shutdown of the kettle before the water boils, to overheating and combustion of the heating element. The market offers special descaling products. Without special means descale is removed with a solution of citric acid and baking soda. For 1 liter of water add 1 teaspoon of citric acid and a little soda. This solution must be boiled and left overnight. In the morning, the solution must be drained, the kettle must be rinsed and then it can be used further. It is recommended to descale it 2 times a year.
7. Temperature regulation.
The most important criteria for choosing a teapot have already been indicated, there are additional options that will brighten up your life. For example, temperature regulation, which is present on teapots of popular brands. There are many positives from such a power regulator, especially for people who know a lot about good tea or for those with small children. For example, you need to feed a child, here you have a regime for baby food, with a temperature of 60 degrees. For teapots 80, 90 or 98 for brewing Japanese, green, black tea, respectively. It is very convenient and even some savings are on electricity.

There are kettles that can maintain the temperature for several hours in the desired mode, which is also useful sometimes. If you are interested in such models, we study branded things that are not as transcendental as they seem at a price.

8. Brands.
Well, we will not advertise anything, as always, but by choosing kettles from Braun, Philips, Tefal, we will insure ourselves against a bad choice. Moreover, all these companies make both inexpensive models and multifunctional teapots with high price indicators. You can choose Moulinex electric kettles, which are of high quality and are even more available to buyers at low prices.

9. Modifications to teapots.
In addition to conventional electric kettles, there are also modified models with special features. The most popular are: thermos teapots (other names, thermopots, thermopots), tea sets and tea makers. We will now consider each species, maybe who will be interested modern tendencies helping to make tea drinking even more interesting and convenient.

Thermopot kettles, very interesting models and many, even when choosing an ordinary teapot, give preference to buy just such a modification. And one shouldn't think that this teapot comes as an addition to the main one, no, it has all the functions of an ordinary teapot and its additional charms. This is the same ordinary kettle, however, unusual shape, but having the properties of a thermos. When you boil water in it, it will simply keep warm for a long time. There are models of thermopots with heating, but with and without such a function, it still retains heat for a long time due to its special design. True, water from such teapots is poured in a different way, through the tap, which is not only convenient, albeit peculiar, but also carries health-improving properties. Indeed, it is in this way that water entering a glass or mug is enriched with oxygen and becomes energetically saturated. The old Asian traditions of tea drinking, this is how it is advised to pour water into tea to make the process ideal for the health of body and soul, and to improve well-being. Such tea will be more aromatic and will give a weighty boost of vivacity, because a thermopot is designed for this, to carry energy through water. And also the properties of the kettle-thermopot do not allow to boil water constantly, and as you know, from constant boiling of the same water, it dies off. As a result, thermos kettles have a lot of functions for creating a healthy, lively, energetically valuable drink. They have the lowest power of the heating element and the most economical to operate.

Tea sets are similar to thermopot teapots, differ only in an additional teapot. All this is placed on a special tray, a joint stand that can be easily disconnected from the connecting cord and placed on the table.

A tea maker is also not much different from the two modifications described above, and its task is also to make good tea. In appearance and method of making tea, this is the same samovar, but electric.

10. Design.
Considering the materials of electric kettles, we have already said a lot about the design and it is only necessary to supplement it with advanced functions of electrical appliances, which make it even more beautiful. A simple backlight, which signals whether the device is on or off, can also do a lot. When choosing, if possible, it is worth turning on the options you like in order to look at their appearance and in the switched on state. As a last resort, we just carefully study the packaging or ask the seller about the colors of the illumination. After all, some new models not only light up the indicator light on the button, they also illuminate the inside. Some models also illuminate the water level, but there are electric kettles that glow different colors depending on heating. Of course, this does not show the quality of the appliance, but this point cannot be ignored, because the design of the kettle, the main appliance in the kitchen, gives an image to the whole room. Agree with white walls, white appliances, and green countertops kitchen furniture, even a white kettle, but with blue backlighting will not work, but green lights will fit perfectly.

Design influences the price to a large extent. The simplest teapots are 7-8 times cheaper than the most prestigious ones. On the attractiveness of different design solutions it's better not to argue: everyone has their own taste. However, when choosing a color, we recommend not forgetting that white is the safest color for plastic in contact with water and is suitable for any kitchen. White plastics are the most harmless, they contain less harmful impurities than colored ones, and less affect the taste of water. Gourmets can taste teas made in teapots made from different materials. Gourmets and those people who pay special attention to preserving their health prefer environmentally friendly materials.

There are many answers to the question "where does the morning begin?" To some extent, this is true, but without what it is impossible to drink that very longed-for cup of coffee or tea in the morning? Without coffee, tea, water, sugar and, of course, a kettle. It is this attribute that allows us to enjoy drinks that have long become a tradition. Let's take a closer look at this irreplaceable accessory. How did the electric kettle appear, what the products are made of, which model is better, and what are the advantages of the kettle. You will learn about this from the article prepared for you.

A little about the history of the teapot

The kettle has long and very tightly entered our life. It is unlikely that there is at least one family on the planet whose house does not have a kettle. The first models appeared in the Celestial Empire, which is not surprising, because it is China that is considered the birthplace of tea in general.

The Chinese guest came to Europe much later, only by the 17th century Europeans were able to experience the happiness of acquaintance with an important accessory of the tea ceremony. True, the teapots of those times did not resemble their modern counterparts, for example, the first models that appeared in Russia, by the way.

For the appearance of an "irreplaceable friend" on the territory of our country, we must thank the northern Scandinavian tribes. It was difficult to call such a teapot and a teapot even at that time - in shape it resembled an egg with a handle, which was hung from the ceiling and a fire was made under it. In the museum of teapots, several such specimens have survived; outwardly, they resemble a cross between a washstand and a vessel for bottling herbal medicinal settings. Products were then made only of porcelain or clay.

A more or less familiar form, the teapot acquired only by the end of the 18th century, just before the very peak of its evolution and development.

The appearance of the electric kettle

Inspired by the discovery of electric current and incandescent lamps, inventors began to modify and alter everything that only came to hand! Our "friend" did not escape this fate either. And, already at the end of the 19th century, German company AEG introduced the first electric kettles to the world.

Initially, the heating element itself resembled a medium-sized electric stove simply screwed to the bottom of the kettle; the structure was large, heavy and very cumbersome. But already in the 20s of the XX century, the inventors again improved the electric kettle by placing the heating element already inside, then it appeared automatic system, which made it possible to heat only if there was enough water. Over time, the bulky and inconvenient heating coil was replaced by a disk, which is a flat metal substance to which contacts are connected, due to which the water heats up much faster.

What are electric kettles made of and which one is better?

In the century high tech, from the choice of electric kettles, eyes simply run up.

Initially they were made:

• made of copper;
• become;
• aluminum.

After a certain time, traditional materials were successfully replaced by convenient, cheap and lightweight plastic, however, soon metal electric kettles came into fashion again, this time already made of steel. The latest fashion trend is glass electric kettles... Such an electric kettle is an ordinary device for heating water, but, at the same time, it is very different from its metal and plastic counterparts.

Why is a glass electric kettle better?

The glass electric kettle has a number of advantages and here are just a few of them:

1. Glass material is not only beautiful, but also environmentally natural, which is much safer for health than plastic, even food grade.
2. The appearance of such an electric kettle is simply mesmerizing. The designers have tried their best, the backlight that changes color when the kettle is in operation, and the very sight of boiling water, in the era of gadgets and electronics, soothes and fits very succinctly into any interior. An electric glass teapot is an indispensable attribute of any holiday and, undoubtedly, an attractive gift.
3. If you are not a fan of noise, it is better to opt for a glass teapot. When water boils, glass, unlike plastic and metal, does not vibrate, so the model works almost silently.
4. It is much easier to clean such a unit than a plastic one. Thanks to the transparent glass, scale cannot go unnoticed, and besides, it does not eat into the walls, as is the case with plastic or metal.
5. If plastic or metal electric kettles cool down rather quickly, and after half an hour the water has to be boiled again, then everything is different. The glass cools slowly, which will help save electricity.

The indisputable advantages of the electric kettle:

As you know, all models are divided into 2 categories: for gas stoves and electric... The electric model differs in that it is capable of heating water on its own. What device do you need? Of course, a glass electric kettle is the one that is more convenient to use and more attractive. Of course, if you have a gas stove in your house, then an ordinary kettle will help save money, as it saves electricity. But it heats up water much more slowly than electric. The electric kettle will boil in a matter of seconds.

The fact that glass is an ideal material is stated above. Even if you have decided on the material of the model, it will not be superfluous to consider the various functions and convenience of the electronic device.

One of the points to pay attention to is dimensions, transportability and conformity with the interior. An electric kettle is convenient in offices, in the country - it is easy to carry and does not take up much space. Elegant models perfectly not only complement the interior, but also decorate it.

If you buy an electric kettle, remember that with disc heater water will boil faster and it is more convenient to descale such a kettle. The function with automatic shutdown is convenient - then, even if you forget about the turned on kettle, after boiling it will turn off by itself. Agree, it is convenient and you do not need to think, "Is the kettle off?"

Pay attention to the device with water filter(unless you have a water purification system installed). It is better if it is removable so that you can clean it without any problems. There are many features on offer today, but when choosing, remember that you will pay more for each additional feature than without them.

Summing up, we can confidently note the leadership of such a model as glass kettle... Despite his relative youth, he confidently took the TOP positions not only on store shelves, but also in the hearts of numerous fans.

In every home, a kettle is one of the main attributes in the kitchen. Whether we drink coffee in the morning and tea in the evening, we use this wonderful device. How to choose the one that suits you best? The answer is simple - give preference electro-models made of glass... Today there is a huge selection on the market: plastic, stainless steel, porcelain, electrical. All models have their own advantages and disadvantages. As for the glass electric kettle, there are undoubtedly much more advantages here.

Updated: 16.02.2018 10:08:25

To make your kettle convenient to use and not "die a death of the brave" after several months of use, before buying, pay attention to the material from which it is made, the length of the spout, volume and other parameters. We will tell you how to do this in our article.

What are the teapots for the stove

Kettles for the stove are most often made of stainless steel and enamelled steel. Less common on sale are products made of heat-resistant glass, aluminum and ceramics, and cast-iron dishes are almost impossible to find, except at a flea market or in a grandmother's chest. They all have their pros and cons.

One of the most popular and successful types of teapots. Stainless steel cookware has a beautiful appearance (shiny mirror surface), as well as high strength and resistance to deformation. The stainless steel does not contain any toxic substances that can "migrate" into the water, so this material is absolutely safe for health.

Many stainless steel models have a flaky bottom made from other materials such as copper and aluminum. This improves heat distribution and makes the heating of the kettle more even.

Dignity

Corrosion resistance - does not rust;

Withstand temperature extremes;

Suitable for all types of stoves, including induction;

High resistance to mechanical damage;

Long service life (over 10 years);

Simplicity of care;

Flaws

Scale quickly appears on the bottom;

Models with thin walls and a bottom do not distribute heat well and quickly deteriorate;

The surface of the kettle gets dirty quickly;

The body of stainless steel dishes gets very hot, you can easily get burned;

Aluminum is a cheap and lightweight material that resists corrosion. During the Soviet era, it was often used to make pots, cups, cutlery and teapots, but now it is used much less often.

On the Internet, you can find information that aluminum dishes, when heated, release heavy metals into water and food, and they gradually accumulate in our body. This is hazardous to health. excess aluminum can lead to the development of diseases such as osteoporosis, cancer, kidney disease, etc.

Others argue that using such utensils for boiling water is safe, because when interacting with oxygen, an oxide film forms on the aluminum surface, which protects drinks from the "migration" of toxic substances. This film is damaged only by prolonged storage of food and exposure to acids, for example, from tomato juice or sauerkraut. Therefore, the use of an aluminum kettle cannot cause cancer and other diseases.

Unfortunately, it is impossible to say exactly how the use of aluminum cookware affects the human body. Too little research has been done on this issue. Whether it is worth buying such a product is up to you.

Dignity

Small weight, even if the kettle is large and thick;

Low price;

Has a long service life;

Does not rust;

Heats water quickly;

Flaws

May be harmful to health;

Cools down quickly;

With a slight physical impact, dents and scratches are formed on it;

Changes the taste of water some time after boiling;

Enamelled steel teapots

Enamel teapots are very popular among the residents of our country and the CIS countries. "Fashion" for them began during the Soviet era and continues to this day. And it is not surprising, because they can have a variety of sizes and colors. Thanks to this, the kettle can be matched to any kitchen design... In addition, when heated, such products do not react with water and do not emit hazardous substances.

Dignity

Affordable price;

Easy to clean;

Provides fast water heating;

Wide range of;

Flaws

Enamel does not withstand temperature extremes, as a result of which it cracks and breaks off;

Scale builds up quickly inside the kettle;

Short service life (due to the fragility of the enamel);

If the inner enamel coating is damaged, it is better not to use the product - it can emit substances hazardous to health;

Glass teapot for stove - good way surprise guests. This is a great option for infrequent use and a festive table. But if you boil water in it constantly, the kettle will break faster. The product may also crack if the temperature fluctuates rapidly, for example, if you place a hot kettle under a cold stream of water.

The body of the product is made of fireproof glass, while the lid and handle are made of plastic. Thanks to the transparent walls, you can control the process of boiling water and its level, and plastic reduces the likelihood of burns.

Dignity

Beautiful appearance;

Easy to clean;

Can be heated in the microwave;

Absolutely safe for health, does not emit toxic compounds and does not change the taste of water;

Flaws

High fragility of glass - even with a slight impact, the walls can crack;

Not suitable for permanent use;

Poorly withstands temperature changes;

Cast iron kettles

Cast iron teapots are one of the most durable and reliable options. They are difficult to scratch or deform, and their service life is tens of years. These teapots warm up evenly and cool down slowly. During long gatherings, you do not have to constantly boil the water - it will remain hot for a long time.

Dignity

Durability;

Withstand strong temperature changes;

High strength and resistance to mechanical stress;

Flaws

Large weight;

Rarely found on sale;

Water heats up for a long time;

Cast iron cookware can rust;

The main criteria for choosing a kettle for the stove

Pen

When buying a kettle, be sure to pay attention to the material from which the handle is made. If it has a low thermal conductivity, it will save you from burns.

Handles can be made from:

Bakelite;

1. Ceramics.

Bakelite Is a heat-resistant material designed for a temperature not exceeding 180C. Above 180C, it begins to char, so it should be kept away from fire. Bakelite handles are comfortable to use, they do not slip and are pleasant to the touch.

Enamel teapots are usually equipped with handles made of metal or ceramic... Metal handles get very hot, but they are highly durable and resistant to shocks and drops, while ceramic handles are very fragile. They slowly heat up, but if the kettle is not removed from the stove in time, you can burn yourself on them.

Sometimes kettles are equipped with silicone handles... Silicone has low thermal conductivity and can withstand temperatures up to 230C.

Spout

With a teapot with a small and wide spout, you can quickly fill your cup. However, a lot of liquid should not be poured into it - the water level should not be higher than the lowest point at which the spout and the body of the kettle are connected. If you use a product with a narrow and long spout, the water flow will be slower. Also, if you tilt the kettle too far, boiling water may spill out from under the lid.

Volume

The volume of the kettle can be either 0.7 liters or 3.2 liters. The choice of displacement, first of all, should depend on the number of people who will drink tea. For example, for a festive table or a large company, choose models for 2-3 liters, and for a family of four, dishes for 1.5-2 liters are suitable. A teapot with a volume of 0.7 liters is enough for one person, and one liter for a couple in love.

How to properly wash enamel and stainless steel teapots

Improper care of the kettle not only shortens the service life of the product, but can also harm human health. For example, the use of abrasive cleaners and harsh sponges will thin the enamel coating on the cookware, causing it to crack and chip and have to be thrown away. If a person continues to use such a teapot, the "open" metal reacts with water and releases substances hazardous to health into it.

Caring for your enamel teapot

Before using the product for the first time, temper it. Boil water and salt in it (1 tablespoon of salt per 500 ml of water). This will make the coating more durable.

Enamel teapots are prone to limescale deposits. To prevent its formation, clean the inside of the teapot daily with a soft sponge. Do not use strong detergents and hard sponges (brushes). Do not leave water in the kettle for a long time.

To get rid of limescale, you can use citric acid, baking soda, vinegar, and even potato peels. Most often, housewives use citric acid. To wash off scale, you must:

Fill the kettle with a solution of water and citric acid at the rate of 25 g per 2.5 liters;

Boil the solution and immediately remove from heat;

Wait until the liquid has cooled;

Rinse under running water and remove limescale residues with a sponge.

Do not wash a hot kettle in cold water. Enamel may crack due to sudden temperature changes.

Care of your stainless steel kettle

Stainless steel dishes get dirty quickly, and stains instantly appear on them. Therefore, it should be washed regularly with mild detergents or laundry soap. It is not recommended to use hard sponges and abrasive cleaning agents - they can scratch the surface. For stubborn and old stains, you can use soap and baking soda. For this:

Rinse the kettle under running water;

Lather the sponge with soap and sprinkle with baking soda on top;

Sprinkle baking soda over the kettle;

Wipe the product with a sponge with the prepared mixture;

After 40-60 minutes, wash the dishes in warm water;

Repeat as necessary.

Best stove kettle manufacturers

The quality of the kettle, the safety of the coating and its service life depend on the manufacturer. Buying cookware from an unknown brand can not only lead to unnecessary expenses, but also harm your health.

Some manufacturers make cookware from low-quality materials that quickly deform and the coating chipping off, allowing the metal to react with water and release compounds that are hazardous to health. In addition, some budget models of teapots have too thin walls and bottom, which is why they heat up unevenly and quickly deteriorate, and the "heat-resistant" handle heats up and melts.

To reduce the risk of a failed purchase, look at the following manufacturers:

These manufacturers are very popular among residents of the Russian Federation, CIS countries and Europe. Most of the reviews about the teapots of these companies are positive - consumers report the high quality of the dishes, durability and ease of use.

Attention! This material is the subjective opinion of the authors of the project and is not a purchase guide.

A kettle is a necessary piece of kitchen utensils, which is in every home. Indeed, evenings with family, spending time at a party or lunchtime at work are often accompanied by pleasant tea drinking. In the modern world more and more people prefer to use electric devices for heating water, which significantly speeds up the preparation of a flavored drink. But still, many continue to use a regular kettle, which is heated with a gas stove.

The main criteria for choosing a teapot

Today, there are many models of household appliances on sale, differing in shape, design, volume and made of various materials.

Before as make delicious tea, it should be remembered that hot water inside the vessel will always interact with its walls. And in order for it not to lose its taste, and the drink turns out to be fragrant and tart, it is very important to choose a good teapot for the stove, made of high-quality material. Therefore, the purchase of dishes must be taken seriously, taking into account the features of the model you like, its size, appearance, as well as the cost of a household appliance.

• Displacement... First of all, you need to decide how much this or that model should have. For a small family, you can pick up a kettle with a capacity of up to 2 liters, and for a large number people in the house are suitable dishes designed for 3-4 liters.
• Material... It is very important to decide what your kitchen assistant will be made of. Manufacturers offer a wide range of teapots made of stainless steel, as well as ceramic, glass and metal. Each of them is convenient in its own way and has certain properties of heating water.
• Pen... Since the appliance will often be hot, it must have a secure handle. It can be plastic or wooden, the main thing is that the device is comfortable to use and does not burn your hands when touched.
• Additional details... If you need dishes with a whistle, then you should find a high-quality option, since in such kettles the whistle not only informs about boiling water, but also performs an important function. Modern models equipped with a special valve that allows you to close the spout of the device, so that your hands remain protected from scalding by steam.
• The size... It is recommended to choose cookware according to the size of the stove and its hobs. Remember, the little kitchen helper can get very hot on large burners and the coating will be damaged by fire. Conversely, water in a large kettle heats up very slowly on a small stove.
• Design... Before purchasing, carefully study the household appliance to determine if it is right for you to use. To do this, hold the product in your hands, check the comfort of the handle, whether the lid closes tightly, as well as the stability of the selected model.
• Design... It also plays an important role for customers, since everyone wants to have not only comfortable, but also beautiful dishes. It is advisable that the kitchen assistant is ideally combined with the interior of your kitchen. Depending on this and focusing on your own taste, try to choose a teapot of an interesting shape and suitable color.

In the process of choosing a household appliance, you need to remember that too cheap models, despite the attractive design and affordable price can be made from substandard material and have an awkward design. It is possible that the water in such products will not stay fresh for long, and this will affect the taste of tea or coffee, the use of which may be bad for your health. Therefore, it is better to purchase dishes from renowned manufacturers that can guarantee the quality of their goods.

Characteristics of dishes made of different materials

To make the kettle always work properly, be convenient to use and please the eye with its appearance, you need to purchase it from a material that will meet your requirements. All products may differ in the way of use, care and other indicators. Therefore, before buying, you need to familiarize yourself with what household appliances are, and then choose the most suitable model for yourself.

This household appliance is made of plastic and durable glass that is resistant to high temperatures so it is great for heating over a fire. Usually such products have stylish design and consist of a main body where water is poured, plastic handle and cover.

The glass gas stove kettle is very convenient during use because, thanks to the transparent walls, you can always see the water level and control the boiling process. And also the product is very easy to clean, scale does not form inside it, and dirt does not adhere to the outer surface.

A significant drawback of this model is that the device can be easily broken. In addition, the vessel may become cracked from improper heating, rapid cooling after boiling, or strong blow... Due to their fragility, such products are not very popular with buyers, but due to their original appearance, the glass teapot will perfectly fit into the interior of any kitchen.

Enamelled water heater

In many homes of our compatriots, you can see dishes with an enamel surface. These are all kinds of pots, mugs, plates and, of course, a kettle. Today, water heating devices are different different sizes, beautiful view and color for every taste.

Enamelled teapots for a gas stove are made of a very durable material - steel, on top of which an enamel coating is applied. The surface of the vessel is highly durable; such dishes are practically not subject to various deformations and chips. And also it is environmentally friendly, and therefore the water in such a kettle will always be tasty and fresh. The handle of the device is made of wood, usually it has an original shape and bright color.

In order for such dishes to serve as long as possible, it is necessary to use them correctly and take timely care of the inner and outer surfaces. To do this, you need to avoid sudden changes in temperature, as this can negatively affect the quality of the enamel. And when caring for the product, it is not recommended to use aggressive cleaning agents.

Ceramic teapot

Ceramic dishes look decent and are quite expensive. It is made using a special technology from glass ceramics or refractory faience. Such products are usually equipped with thick walls, which is why they are heavy, which is not very convenient during operation. The water in ceramic dishes boils slowly, but stays hot longer.

The advantage of products made from this material is that they are environmentally friendly and completely safe, they are not able to absorb foreign odors and do not change the taste of water. Such dishes attract attention, look very aesthetically pleasing and therefore are quite capable of enlivening and decorating the kitchen space.

Stainless steel product

The most popular are stainless steel teapots for a gas stove. Users note that these products are practical, easy to use, lightweight, and also look original and modern.

The water in such dishes does not acquire foreign tastes, but remains clean and fresh for several days. Stainless steel products are highly resistant to fire and are not exposed to temperature extremes. Therefore, metal teapots are able to serve for quite a long time, always retaining an attractive appearance.

Rating of the best kettles for a gas stove

Thanks to the variety of household appliances presented, you can successfully purchase a high-quality and original teapot based on your own preferences. But it is worth noting a number of products that have proven themselves in the market and are in great demand among buyers. These include the following models:

1. Tefal C7921014. The dishes of the famous Tefal brand are famous for their excellent quality and stylish appearance. The body of this kettle is made of high-class stainless steel, which makes the product very reliable, durable and practically unaffected by external influences. The volume of the device is 2.5 liters. The outer surface of the vessel has a matte light gray finish. The lid is easily opened using a special lever. The kettle is equipped with a whistle that signals the end of the boiling process.
2. Vinzer Symphonia 89003. The product of the Swiss company VINZER is also made of stainless steel. The kitchen assistant has a volume of 2.5 liters and a double bottom and can also be heated by different types stoves: gas, glass-ceramic, electric, induction. Thanks to the exclusive design, the kettle heats up evenly, quickly, and after a few minutes, the water in it begins to boil. The body of the device is glossy, silver in color, the handle is attached to one side and has a curved shape. There is a whistle on the spout, which can be opened using a special button.
3. Mayer & Boch 23855. Enamelled whistling kettle made of carbon steel. The model has a volume of 3.5 liters. The handle is made of thermoplastic, on which there is a mechanism for controlling the whistle. The body of the device is of a usual shape, decorated with bright floral patterns. Heats up quickly and is able to keep warm for a long time. The product is dishwasher safe.
4. Mayer & Boch 27501. The kitchen appliance is made of high quality steel and enameled on the inside and outside. The kettle has a classic look, has a capacity of 5 liters and is suitable for use on any stove. The handle is made of ceramic, the surface of the vessel is smooth, light color, there is a floral pattern on it. The model looks quite original and will look great on a dining or festive table during tea drinking.
5. Kelli KL-3004. The kettle is made of fireproof glass, with a volume of 2.2 liters. The model looks quite interesting due to the unusual shape of the case, it has a folding plastic handle and a water filter. The disadvantages of a kitchen appliance include low heat resistance - up to 170 degrees.
6. Rosenberg RGL-250004-M. Glass product for a gas stove with a capacity of 0.8 liters. The kettle is designed for a small family, does not cause problems during operation and is easy to clean. Such dishes are heat-resistant up to 145 degrees and have an affordable price.

To purchase a suitable product, you need to focus not only on the brand name, but also carefully study what the kitchen appliance is made of. It should not be forgotten that the aroma and taste of any drink will directly depend on this.

There are a few more things to consider before buying a kettle:

• The speed at which water boils is always determined by the material from which the kettle is made. The fastest way to cope with this is stainless steel products, which are quite practical, functional and have an affordable price.
• Teapots made of glass or ceramics look very impressive, but due to the low coefficient of thermal conductivity, their walls are often made thin during the manufacturing process. Therefore, these products are quite fragile.
• For a gas stove, a kettle with a classic shape is best suited. Such models are much more convenient to use and are better exposed to uniform heating.

Simple tips will help you choose a kitchen assistant, and soon a beautiful and original teapot made of high-quality material will appear in your kitchen. And communication with family, friends or moments of relaxation will be accompanied by a pleasant tea.

Attention, only TODAY!