How to properly cut the angle of the ceiling plinth - Rules and methods. How to trim the ceiling plinth with a stouch template How to cut plastic ceiling plinth in the corners

At first glance, the installation of the ceiling plinth may seem uncomplicated. If you do not take into account some moments, then this is true. But what moments are we talking about? It comes to cutting cartoons or plinths. After all, the room has its own angles. And if you do not have any problems on direct sites, then here are the angles and other forms can bring headache. At the corners, the materials need to be allowed to get an ideal angle of 90 °.

Therefore, many ask a question: how to cut the ceiling plinth? This article will help you solve this task. You will learn several ways to cut the ceiling plinth, materials used and the principle of operation. So you can easily stick the ceiling baguette at home.

Choosing a suitable tool for cutting

The primary task is to prepare all the tools and materials. If we are talking about cutting, it is clear that the main tool for this work should perform work on cutting. It is chosen depending on what material the ceiling plinth is made.

But, the cutting material is not the only one required tool. Our task is to create an ideal angle of 45 ° on the baguette. For this purpose, the stub is perfect. The product can be made of metal, wood or plastic. Looks like a box with pattern cutting patterns at a certain angle. Hoven or knife is inserted into the inscription, perfectly cutting the plinth. The product can be bought in the store. it necessary thing in the farm. This option to cut the plinth is the easiest. There are other ways. Let's consider each of them.

How to cut the ceiling plinth with stub

With this task, any ordinary person will cope with this task. Optional to have construction skills. All that will be required is a cutting tool, a stubbling and the ceiling plinth itself. Working with the product is needed carefully. Otherwise, you can blow up the tool and leave the guilt where they are not needed.

How to cut the corner in stupid, instruction:

The same needs to be done with another baguette. Just remember, the angle of the ceiling plinth must be opposite to the first, so that a straight angle is formed during the docking.

Corners can also be different. For example, a simple wall has an inner angle that rests inward. Technology trimming the plinth for such angle is described above. And here is a visual photo.

And if the design of the room offers a clone or an unfinished partition, then the external corners are directed to the room. Here everything is done also, only a cut on each product is the opposite. Compare these photos to see the difference.

A visual example of an external and inner corner in the room is visible on this photo. Here, the ceiling plinth is already pasted on the ceiling, which was cut off the above methods.

Cut the ceiling plinth by template

If you do not have a stupid and you decide not to buy it, you can do with undergraduate means using a pattern. Only the method is appropriate when the angles of the room are perfectly smooth, and the plinth must be cut at 45 °.

You need to make sketches on paper that will imitate all the same stub. Paper must be dense. Draw on it two smooth and parallel lines. After that, spend the desired angle with the help of the transport. Another option is to draw a large square and connect it to the diagonal. The square must be perfectly smooth. This is depicted in the photo.

Now the case will be reminded by cutting a baguette with the help of a stouch, only without gaps. It is necessary to put the product in exactly the way that the edges are on the same line. And when cutting it is important to keep the knife or hacksaw strictly vertically.

Cutting the ceiling plinth by markup

Another option alternative to Stusl. Work is to create marking on the wall. The whole process is reduced to the following steps:

Now you have in service as 3 of different waysHow to cut the ceiling plinth in the corners. Select one of them to cope with the task. A visual video will help you in your work.

Before you start work, we recommend that you familiarize yourself with these rules that will not only simplify the task, but also help to do everything quickly, efficiently and without disappointment. So, here are these rules:

Before starting to cut the baguette for the first time, you can practice on another bar, unnecessary. So you miss your hand.
For the correct measurements, you need to measure the length of the inner corner of the bar on the side that inside, and the length of the outer corner, ranging from the point of the angle inside the width of the room.
When installing the product under stretch ceiling, it is fixed only from the walls of the wall. Your task is to prevent the glue into the canvas from vinyl, otherwise it will deteriorate.
Finally secure the plinth only when the bar is fully adjusted.
With perfectly smooth corners, you can fit the baguettes on the floor.
By installing products, not everyone gets to do it from the first time perfect. Need fit. Be patient and do not give up!
If we talk about eppps, it is not necessary to carry out their fit. After all, the structure of the material is soft. Another thing tree or plastic. That's where the docking should be high quality.

All photos from the article

When someone is first taken for the preparation of the corners, most often he has to spoil not one meter of material. Alas, but even the acquired stupid does not always help in this when the walls in the room are connected under arbitrary, and not at right angles.

You have to rely on your own eye or make a special template. Today you will learn how to make the corners of the ceiling molding using the tool without it.

Tip: Instead of a saw attached to the stupid, it is better to use the usual hacksaw metal. Its cut more clearly and even more importantly, it is very important in this process.

Before starting work

Choosing the right width of baguette - pledge beautiful interior. The method that you do this are also played in the dispiling process. We want to give you a couple of recommendations that will help to achieve conceived.

So, how to choose the width of the material and how to trim the ceiling plinth in the corners:

the prepared surface of the wall is not a standard of flatness, use the strips of a smaller width, as they are more flexible and can close maximum amount Defects. Accordingly, on the contrary, than the perfect surface, the width of the molding may be greater, however, consider - in the rooms with low ceilings, mount the unintelligible baguette, so as not to reduce them and visually;
apply the left side of the corner always to the stouch during the sawing on the left, right - right. In addition, it should be close to you to the side of the tool, distant - for outdoor moldings. Please do not confuse.

Below will we deal with more details with the task where you find out - how to cut the corners of the ceiling plinth correctly and with the greatest quality.

External

There is one nuance of this process, which you should never forget about. We always look at the box ceiling bottom, so when the plank is put in the stub (to your neighbor), it is necessary to turn it over.

The upper part of the molding will then be at the bottom, and the bottom, respectively, at the top. Thus, there will be no gaps between the planes of parts of the angle when they are connected.

The instruction of the process will be like this:

Take measuring tools, For example, roulette, and pencil. Start marking from the inner corner, so you will not miss the outer. It may happen so that there is not enough baguette length and have to do a lot of joints;
Attach molding to the ceiling surface and mark the dimensions;
Prepare stubs and hacksaw for metal. Press the baguette to your side to the tool;
Keep the galler with your hand and select the position of the hacksaw, at which the corresponding connection angle will be set. These can be standard parameters - 45, 90, or 135˚, or arbitrary, for which it is necessary to push the stubbling to the selected degree;
Cut the blank with a hacksaw;
Install the opposite bar to the near wall of the tool and lock it with your hand;
Place the selected degree on the stupid and cut off the workpiece with a metal with a metal;
Docine the resulting planks of the plinth.

Tip: If the walls are connected to a right angle, only in this case will help you in the work of the stub, otherwise you will have to fit your own hands.

Interior

There is a professional stub, which has a swivel platform and can be moved to producing arbitrary angles, as well as for home use where special features are limited. Usually in repair it is enough to use the second option.

So, the main principle - the ceiling planks are cut off from the tool walls near you, we hope you have not forgotten.

The process in this case looks like this:

Measure the necessary length of the baguette by applying it to the ceiling surface;
Put the strap molding in the stub, while its position should fully correspond to the location of the baguette on the ceiling;
Press the bar to the near wall of the tool;
Select the appropriate degree cut, most often it is 45. Watch the handle of the handle to be as close as possible to the hand holding the bar to make a slice as much as possible;
Cut the workpiece, but do not apply unnecessary effort to the hacksaw;
Prepare and cut the opposite bagent bar, not forgetting that it should be pressed to the near wall of the stub;
Choose and for it the corresponding angle of cutting, leaving between the handle of the handle and hand holding the molding, the minimum distance;
Cut the edge of the plank.

It remains to check the correctness of the docking of the segments, and, if everything corresponds to the expectations, install them in place.

Tip: Start cutting with the front of the molding, then you can set it up as accurately in place. Wooden baguette angles After cutting, treat and apply a file.

How to make the corners of the ceiling baguette without stub

For the first time deciding to make a framing on the ceiling, the newcomer does not see any problem in this, and in vain. We advise immediately take into account in the cost of a certain amount of material that will have to simply throw away.

Alas, but at what angle cutting the ceiling plinth depends only on the connection of the walls among themselves. Not everyone matches the direct, for which it is enough to simply cut off the planks under 45˚. Often there are parameters corresponding to 85 or 95 degrees, and this is already a problem for beginner finishers.

If you are the owner of an apartment, built in the last century, it was generally considered the norm. The fact is that when you simply cut the plank under 45˚ and install on the ceiling, the gaps will remain between them, which will then have to be embedded with a sealant or putty. We will try to help you solve this problem with minimal costSince the price is not for each molding is kopeck.

So, how to properly cut the corners of the ceiling plinth for the inner corner:

Preparation	Prepare a tool that need in work. If the plinth is made of: foam or polyurethane, then it is enough to have a sharp knife or hacksaw for metal;
Marking	Take the molding and depimate it to the selected corner. Orient it in the same way as it will be established in the end. Pencil draw a line along the plank and remove it; Do with the second tapery of the same procedure as with the previous one. At the same time, it should be adjacent to the place of connection; As a result, you will have a placed area; Take the baguette, lean it to the markup. Transfer to it the intersection point of two directs drawn up earlier; Spend the line from it to the opposite edge of the carter, which will be a cut line. Make the second baguette similarly.
Cut	With the help of a sharp knife or hacksaw for metal, cut the edge of the molding.
Check	Take two bugeth and attach them to the corner. Between them should not be a gap, otherwise the surface correction with a knife is corrected.

Remember when creating:

inner corner - the lower part protrudes over the top;
outdoor - top over the bottom.

Output

If it seemed to you that work on creating a beautiful interior with the help of the ceiling baguette is quite complex, it is only at first glance. Do everything, according to our instructions and you will quickly understand the essence of the process. The main thing is to accurately and correctly calculate the amount of material for work.

The video in this article will give the opportunity to expand your knowledge on this topic. If you have questions in the process of reading the publication and after it, please ask them in the comments, we will be happy to give answers to them.

Planning in the premises of its apartment, many think about how difficult work can be. However, everything is not so scary: the ceiling plinth can be installed with your own hands - the main thing is to know about some features of the materials from which this finishing element is made.

Different materials and their features

Wood . The most durable material in comparison with the two other shown below, the advantages of which are to hardness, impact resistance and ability to withstand certain mechanical loads. However, wooden plinths (another name - cartoons), glued on the ceiling, are also relatively easy to process - they can be cut (for this it is used with a tree with a varnish. The tree will give the interior warmth. Of the minuses you can call higher than that of the foam, the cost. However, the appearance of wooden cartoons retain longer than foam.
Styrofoam . Perhaps this material is the most fragile - it is unstable to mechanical damage, scratches and even non-mounted shocks. Of the advantages - a light weight, ability to stain in different colors And simplicity in processing (it can be cut by the stationery knife - the truth is very neat).

Polystyrene foam . This material can be considered a type of foam, however, its strength characteristics are slightly higher (extruded polystyrene foam is more dense than foam). As for processing - polystyrene foaming is as easily cut in a conventional sharp knife, and also has a small weight, and this is an important factor in taking into account the load on the walls.

Both of polyfoam, and polystyrene foam has one significant advantage: the softness of the material allows you to closely press the plinth to the corners and to each other, as a result of which the gaps remain. In addition, modern polystyrene plinths are manufactured in such a way that they have a small deepening - especially for hidden pads wiring.

Useful. able to turn the appearance standard apartment In the elegant stylish interior.

Stuslo - Tool for cutting the corners of the plinth

There are two ways to cut the corners - using the tool (stus) and without it. We will look at both methods.

Plastic stuslo

Stuslo - a carpenter tool, which is a small rectangular tray (it can be made independently from the tree or purchase ready-made of plastic or metal), in the walls of which there are grooves. The grooves directed the blade of the hacksaw at a certain angle to the tray axis.

Important: the cutting angle of the base of the plinth is always oblique and equal to 45 ° when items are processed for installation of the bug in the ceiling corners. Kosy slice provides a more dense adjacent of cartoons.

Making a stouch with your own hands

Unfortunately, not all at home has all the arsenal of carpentry tools, but the semblance can be made independently. To do this, the rectangular tray made of dusts is labeled, then the grooves are cut in the walls - at an angle of 45 °.

Homemade plywood stub

To measure the angle, you can use 2 knocked boards and transport or ordinary right triangle - Here is a stub and ready!

1 method - trimming the edges of the plinth using stub

It is worth noting that the ceiling angles can be internal and outer, and the difference between them lies in the methods of docking and different angles of cuts. The first are in the joints of two walls and the ceiling, the second - when designing protrusions, columns, outer edges of niche, pilasters, etc.

The angle of inclination of the groove in the stub can be equal to 45 °, and 60 °, and 90 °. Professional carpenters acquire a stood with a swivel mechanism - in such a very convenient to turn the cutting tool when cutting the plinth.

Cutting "Inner" angles

Important! For cutting "inner" angle, the cartel should be put on the bottom of the stouch with the upper part - the one that will be glued to the ceiling. In this case, the lower part of the bar must be tight pressed against the tray wall.

Step 1: The correct measurement of the plinth length according to its marking on the wall, the application of the "serif" with a pencil on the material for the future cut.

Step 2: Installing the material in the stub. From the correct placement of the plinth in the tray, the correctness of the edges of the cartel, and, accordingly, the accuracy of accuracy of them on the ceiling will be dependent.

Step 3: After the plinth is installed and tightly fixed in the stupid (it is possible to just press the material with one hand), a knife is set to the groove under 45 °. Now the material can be cut. The edges of the second plinth, which will be adjacent to the first, are cut in the same way, only as if in the mirror reflection (the plinth is installed in the opposite direction, the edges are trimmed also at an angle of 45 °).

Important: when trimming the edges of the cartel, jewelry accuracy is needed - otherwise the material will be spoiled, and the appearance of the plinths in the joints of the walls too. If polystyrene foam plinths are used, then the edges can be cut off with a conventional sharp knife without stouch. However, it should be remembered that cutting angles should be made from the front side.

Cutting "external" angles

The difference between the "external" corner from the "internal" is that the plinths must speak a little from the edge of the wall - for the so-called adhesive.

We repeat steps 1, 2, 3, similar to the cutting of the "internal" corners. However, it should be remembered that the upper part of the plinth (one of the edges) must have a small allowance. The second (adjacent) pad is cut off in the same way, only the mirror to the first.

Cut the edges of the wooden ceiling plinth lighter (and better) with all the metal hacksaw - with small frequent teeth. Then cuts will be more neat and even. And the polyfoam is well cutting and the usual sharp knife (or construction) - but the blade should be well honed, otherwise the material will crumble when cutting.

For frieze to become a decent decoration of your interior, you should seriously approach its choice and installation. But if you do not know how to trim the ceiling plinth, everything can go awry.

Trimming frieze with stub

For starters, let's figure out how to crop the angle of the ceiling plinth. Most rooms are rectangular. Based on this, two adjacent quantities need to be cut off at an angle of 45 °. From the accuracy of the execution of the cut, you will depend on how neat the external and internal angles will turn out. It is not recommended to make such an eye work, since such libations usually lead to the damage of cartoons. It is more correct to take advantage of the high-quality stupid of factory manufacture or building analogue of such a device ..

So it is necessary to place a quilt in the stub

Types of stub

The simplest models of the stub are allowed to trim the plinth at an angles of 45º and 90º. More complex structures Provide cutting and at an angle of 60º. Most often, they are made from plastic or wood, less often - from aluminum alloys. It is more pleasant to work with an electric stupid (trader saw), but its purchase is expensive. True, if you have a big front repair work, Think about the acquisition of such a tool. After all, the fine saw allows you to cut any billets, including metal. In addition, the trimming can be done both in direct and at an arbitrary angle.

Of course, you can not rush in extremes and dwell on the purchase of a manual, but professional tool. For example, a rotary stub, which consists of a base with marking and hacksaw, also allows you to spend the cut at any angle. Of course, it is very convenient to crop the corners of the ceiling plinth, but this tool is quite expensive. Fortunately, there are more economical options.

Rotary stupid will allow you to quickly trim the plinth at any angle

Stages of pruning

Armed with a conventional stub, a knife either with a metal knife, proceed to the fulfillment of our mission. So, how to crop the angle from the ceiling plinth using a stub? Stages Trimming:

Place the baguette by the party, which should lay down to the surface of the ceiling, on the bottom of the stub.
Press the bottom of the frieze to the tool wall.
Dispise the quilt with the help of a knuckle on the slot of the stouch at an angle of 45º.
Do similar actions with adjacent plinth, using another slot intended for the formation of the same angle.
Attach both friezes to the place of their further attachment. With a small inconsistency due to irregularities, cut the extra material with a sharp knife.

Please note: cutting the plinths for internal and outer angles is an identical process, the only difference - different pairs of slots are used.

To circumcise internal and external corners, use different grooves.

Caution: During the cutting of frieze should not be too pressing on it, otherwise chips may occur on the product.

Manufacturing homemade tools

Make a stouch personally simple, for this you will need three wooden planks. Of these, it is necessary to knock down the P-shaped design, on the walls of which the angles are scheduled, after which the box was performed. Now you have a wooden stood with cut-off grooves.

Alternative options for trimming cartoons

Do not be upset if you do not have the necessary carpentry tool and material for its manufacture. Ceiling plinth can be trimmed and without a stub. You can:

draw marking on the wall;
pictulate a patch pattern on paper, cardboard, plywood;
apply a tracing saw;
trust the chapera.

ATTENTION: so that it is not to trim the baguette, take advantage of special internal and external aircraft. The accessories are glued into the corners of the room, after which friezes are inserted into it on both sides.

Application markup

Crop the ceiling plinth can be made using markup. Let's start with inner corners.

You will need plinth and pencil. Leave the frieze to the corner of the wall. After that, on the ceiling along the baguette, it is necessary to read the straight line. The first stage is completed.

We carry out the line over the adjacent to the first adjacent plinth. It must also be cut at an angle of 90º. However, you can take the same galler, which was used during the first line.

The boundary of the top of the adjacent baguette

At the intersection of lines put the point. It should be alternately transferred to two frieze, from which an internal angle will be formed. Spend a pencil to a smooth line from the point to the nearest corner of the opposite side of the cartel.

Taking advantage of a building knife, cut off the extra part of the framed line. Do the same with the second baguette. Cropped cartoons connect, if necessary, we carry out their adjustment. The final stage is the installation of the plinth.

To make an inner corner, alternately attach cartoons to the desired parties, the line of both the borders and under them. Both points of intersection of adjacent friezes are transferred to the plinth and connect. Thanks to them, you will learn how to cut the ceiling plinth in the corner, because the feature obtained and it will be a cut line. Gently remove the unnecessary and connect friezes. If the angle is configured successfully, you can start installing baguettes.

You will receive two points crossing the lines of friezes

Trim using template

You can draw the similarity of the stouch on the leaflet, cardboard, etc. Swipe on the selected material horizontally two parallel lines. Using the transporter, set the corners. Use the template just like stupid. Differences: nothing to press the lower edge of the baguette is not necessary to fall into the grooves due to their absence. Such a stupid is recommended to use when the angle of the room is not direct.

Drawn pattern to replace the factory tool

When you can use the eye

Due to nonstandarity of some angles, such as an excessive roundness, their formation of four or more parts of the baguette can be performed. Then fitting, most likely, will have to be carried out on the eye, constantly checking how well the carved elements are joined. It is necessary to thoroughly combine each subsequent part with a cut of the previous one.

You have the right to choose any tool for cutting baguettes that you want. But the specialists still recommend using stupid, especially if in the room all the corners are straight. Even the simplest model of this joinery is much more convenient than the drawn template. For the finishing of non-standard angles it is worth considering other trimming options or purchase a rotary stub.

How to cut the ceiling plinth

The installation of the plinth is the final stroke of the repair. And if the installation of the product on the direct sections of the walls of the walls and the ceiling is performed quite easily, then the facing of the angles often causes problems. Many people, not knowing the technology of cutting the plinth, spoil not one dozen planks in the hope of docking them in difficult places. We will tell how to properly improve external and internal angles so that they look carefully and attached to the interior of the completed view.

Varieties of ceiling plinths and scope

Before moving on to the question of cutting the product, consider it a variety. After all, it depends on the choice of this finishing element, whether the premises will receive the desired visual volume and whether it will become a more cozy and pleasant look.

Pick up the perfect finish option ceiling junctionwhich will be harmoniously combined with the design of the room, is not so difficult, because the product range is very wide today. There are ceiling plinths (cartoons) made from different materials: plastic, foam, polyurethane, polystyrene foam, wood and gypsum. In this case, all the planks can have a different color color, texture, profile configuration, as well as dimensions. Consider the features of the use of cartoons depending on which material they are made.

Knowing what kind of plinth is better to use in a place in need of the finish, it will be easier for you to navigate when choosing a product and pay the maximum attention to creating your unique interior design.

Plastic products, in addition to the decorative function, can be used as a groove for fastening wall PVC panels. Such quantities are not glued to the surface, and fasten to a predetermined frame by means of a bracket or self-tapping screws.
Polyfoam planks It is advisable to use for finishing suspended ceilings From drywall. Also, they can be installed on itself concrete base, pre-plastered. This is the most a budget option Ceiling plinth, as the product has a rough surface, which is subject to pollution. Therefore, at such cartoons after installation, it is advisable to apply a layer of paint.
Polyurethane decorative elements are used for the ultimate finish of false ceilings from polyvinyl chloride panels. Room fixation is performed using special glue for PVC products.
The ceiling plinth of expanded polystyrene is a universal finishing element, since it can be used for finishing the engineered surfaces, as well as ceilings lined with plastic panels. The attachment of the plinth can be made on special glue either gypsum shnot.
Gypsum products are often used to give the interior of some pomp, characteristic, for example, for royal houses. Installation of such plinths is performed on plaster materials, that is, the shp can either alabaster.
Haller made of wood is a classic option for decorating ceiling and wall joints. This is the most expensive block of plinth, but also the most durable.

Gallery of types of ceiling plinth

Tools for work

The first question to which people are asked to assemble the installation of the plinth personally, - what to cut it? The tool is selected depending on the material from which the quilt is made. For example, products from polyvinyl chloride have a hollow structure. Therefore, so that when they cut the edge of the saws turned out as even as possible, it is necessary to use hacksaw with small teeth. Otherwise, cracks and chips can form on the finish.

The optimal option is to use saws for metal - its teeth are small, and the width of their divorce is suitable. However, the use of hacksaw is limited to products with a rigid structure, that is, for thin-walled cartoons it will not fit. The fact is that the teeth can hurt the surface of the plinth.

Can also be used for cutting manual Lobzik. When cutting products, the corners are obtained as smooth as possible. But this device has several drawbacks. Because of the low length of the cutting canvas, the use of stusla (a special tool for cutting a plinth) becomes very problematic. In addition, the cut is performed slowly.

Useful advice: If the peller has thin walls, then for its cutting, use the stationery knife, namely its construction modification with a reinforced blade.

What is a stub?

High-quality pruning of the product is possible only with strict observance of geometric shapes. When installing the plinth, the execution of this condition is extremely important, because to obtain a neat connective seam between the decorative elements, it is necessary to have a smooth cut. If produced this procedure "On the eye", then the brushless connection of the two plinths will not be able to do, because the ends will not fit each other.

The highest quality cut can be performed using a special joinery tool called Stuslo. Its design can be different, but the principle of operation always remains unchanged. There are devices with manual adjustment of the corner of the corner, however, often builders use the standard variation of the tool, which is a wooden or plastic tray with vertical grooves in the walls to insert the saw. Thanks to the stub, you can easily perform vertical trimming of plinths at an angle of 45 and 90 degrees.

In addition to the cutting tool and carpentry, when installing the hall, you may need: pencil, vehicle, self-tapping screw, mounting glue and sealant.

Underlooking the corners

Cut cartel for external corners is performed in the opposite direction

Cut the plinth can be with a stouch without it. Consider each of the ways. Qualitatively cutting the angle through a special tool is very simple. First, the required quarrel length is measured. Then the first plinth is stacked in the stub, and the cutting tool is inserted into the vertical openings. The arrangement of the hacksaw is selected based on how the corner needs to be cut off the product. Next, it can be cut. At the second stage, trimming the second plank, which will be docked with the first one. At the same time, the knife should be inserted into opposite grooves at a similar angle.

Important: When combining two slats between them, a straight angle should be. Only in this case can be transferred to the next step - the fixation of the product.

Crimping the corners without using a joinery tool is made by markup at the installation site. The greatest inconvenience in this case is to hold the decorative element under the ceiling. First, measurements are performed here: the strap cut off at the right angle in turns are applied to the place of their installation and put pressure on the pencil. As a result, it turns out the connection point of the elements. Then on the plackers the line of the cut from the point of the joint to the corner and the products are cut off with the subsequent check of the accuracy of the connection.

Instructions for cutting

For the docking of the finishing element in the inner corner, you need to perform a subsidement and the right plank. Consider the method of cutting using Stusl. The procedure here is the following:

For convenience, insert the right plinth insert into the tray on the left side, turning it over

First we make the markup of the angle, in order to exclude the situation with the shortage of the length of the prepared product.
Left bar take in left And we set in the stubble from the long-distance fibers of the device. At the same time, the carter is located under the angle, as it will be installed to the ceiling.
Next, we insert the saw into the near right and long-range left vertical holes of the stub (at an angle of 45 degrees to the bar). We produce cut.
We establish the right bar by analogy with the left. At the same time, the product must be flipped over so that its ceiling facet lay on the base of the stus.
Shot this time insert into the near left and far right grooves. Perform a cut.
We take both planks, we connect on the floor and check the accuracy of their adjacent to each other.

As for external corners, they are in indoors in indoors, but, unlike internal, their flaws are more noticeable. In this case, an extremely accurate docking is required. If the value of the inner angle is 90 degrees, then external - 270 degrees. Therefore, the cartoons are cut here in the opposite direction.

To finish the outer angle, the left bar of the plinth is cut in the same way as the right for the inner corner, and the right - similar to the left

Stages of work:

Measure the side of the corner.
We take the left plank in the left hand and set in the stub.
We insert the hacksaw to the near left and far right groove at an angle of 45 degrees to the plinth and cut the product.
We start the response bar, turning it over it. Power put in the near right and far left holes. We produce cut.
Check the accuracy of the joint of two slats on the floor. If everything is in order, then you can move to the fixation of the decorative element.

Video: how to cut the plinth

How to cut cartoons

If you have rounded corners in your house, then their finish will take more time and labor. Installation of the plinth in this case requires certain skills. Such angles can be made in two ways:

Cut the carter to 5 cm widths. Depending on the length of the arc, it may be necessary to take a different number of parts, but it is advisable to use at least four. Straight ends should be only in the extreme parts that will be shrinking with the plinth itself.
Now we glue the extreme pieces to the previously installed direct killers.
Customize the rest of the pieces, trimmed by necessity. We glue all parts of the jack.
Close up of gaps with a sealant or putty. Tin and disguise the joints, giving the finish the completed view.

Useful advice: Name all pieces so as not to confuse the order of their installation.

Similarly, the installation of a plinth on columns and pillars located indoors.

The use of a flexible quilt allows the maximum to reduce the number of angular parts, because in some situations there are enough single planks for finishing an angle. Often, such a plinth is made from polyurethane, so it can be bent at any angle. By the way, the product is often used to fabricate complex ceiling structures with rounded elements.

Video: I got angles from cartoons

The presence in the interior of the connecting parts is not always appropriate. A more aesthetic approach to the docking of the ceiling plinth is the formation of connecting seams. Neat crucible product is a pledge of beautiful external view all finishes.

Did you like the article? Share it

Print article