Production of children's chairs with their own hands. Children's wooden chair do it yourself

Little wooden stool will find a use in every home. Children are worn with such stools with great joy. Sitting on such a stool is convenient to clean potatoes and perform other "seating" work. However, buying a small stool is not solved by many due to the fact that there is always a more important waste of financial resources. But, make a small wooden chair with your own hands with almost everyone. For its manufacture, you will need an electrolovka and a little fantasy.

Preparation.
Production of details, grinding.

Painting.

Preparation.
Preparation of material I. required tools Plays an important role and allows you to save time in the future. For the manufacture of the toaster we will need:
- the outstanding board of 800x200x25 mm (sizes of approximate, can be processed from what is in stock),
- 8 shiny screws (50-60 mm),
- sandpaper,
- Electrolovka,
- screwdriver or screwdriver,
- paint and wood varnish,
- Roulette, pencil and corner.

You need to start with the markup of the board. First of all, with the help of a corner, pencil and roulettes, we mark the rectangular segment without a long 32-33 cm long. This will be the top of our stool. Next, we note two segments of 23 cm - it will be the sidewalls. Now it is advisable to give them some curly pattern. You can use any items that have a circle, simply by finding them with a pencil. But, such a method involves an inefficient consumption of time. After all, it will have to celebrate the center and other sizes in each sideway. Therefore, for the sides, it is better to use a pattern cut from a pre-tolst cardboard or other material. It will allow you to easily and quickly post a large number of sideways. It is enough to attach a pattern and circle a pencil.

By the way, the use of a figured pattern on the sideway, not only gives them beautiful viewBut it allows you to cut all unwanted knots.
And immediately mark the jumper. It should have a trapezoid form and have parties 230 and 220 mm. The width of the jumper is not fundamental - from 80 to 120 mm.

So, has a placed board.

Important! Do not draw too fat lines - it affects the smooth trimming. Yes, the pencil is erased not so easy.

With the help of an electric batch, cut out all our items. There is an evenness. For smooth cutting of the cutting of the tool, it is better to keep the line, and on the side of it.

You can learn exactly cut on unnecessary waste. So, cut out all the details.

It will give the product not only a beautiful view, but also hobs all possible irregularities.
Further, all these details are carefully polished with shallow emery paper. It is at this stage that this procedure is most rational at this stage, since when grinding the finished design, a number of inconvenience may arise. Smooth plane conveniently grind, putting sandpaper on wooden bar, or on manual Machine For wipping putty. The main thing is quality, since after painting, all flaws will manifest and will be visible.
This looks polished and not polished the sidewols.

So, it has the same details, but already ready for the assembly.

The assembly is preferably in this order:
- connect the sidewalls with a jumper (1 screw on each side);
- I exhibit this design on a flat surface and screw up the top cover (2 screws on each side);
- Strengthen the connection of the sideways with a jumper (another 1 screw).

Highchair assembled! Once again check it on a flat plane. In case the stool is slightly risen, then pose legs to the full stability of the product.

Painting.
Before painting, we once again check the product for defects, if necessary, we erase them and the remnants of the pencil. With the help of a tassel, we clean the stool from wood dust and proceed to painting.
Here already "the taste and color of the comrade is not"! You can leave the natural color of the tree, opening it with a colorless varnish. You can give the product a certain color with a variety of paints on a tree, which are full in all building stores. In principle, one layer is enough for painting. But, if after a complete drying of the first layer, the surfaces are slightly slightly littered with shallow sandpaper and apply a new layer of varnish, then the gloss of the product will noticeably increase.
Important! Bad shrank ends absorb more paints and become darker.

This looks ready, opened with a lacquer.

Handling furniture made by the heat of the soul of their creator. It is especially pleasant when the expensive hearts are used by such man-made objects, again and again remembering the craftsman. AND the best way Show your abilities - this, of course, do it yourself child chairborn.

Children's chairs can be bought in the store. However, it may be uncomfortable and even dangerous to the health of the child.

This miniature piece of furniture will be faithful to serve as a precious baby and, moreover, the creator can be completely confident in the safety of the materials used.

Materials and tools

So sweet and, most importantly, the baby's durable chairs will be able to use for several years. The dimensions of the furniture are ideal for a child of 2-4 years. Additionally, the product can be decorated, applying a bright ornament or drawing on the back.

To fulfill the product, you will need the following tools:

For the manufacture of children's chairs There may be needed hacksaw, screwdrivers, pliers, self-tapping screws, hammer, nails, screwdriver, etc.

• saw;
• electric drill;
• sandpaper or grinding;
• self-tapping screwdriver;
• construction corner and pencil;
• furniture varnish, brush, solvent.

Of course, every parent wishes to her child only the best and tries to take care of his health. Such a chair will help protect the baby from extra contacts with materials separating harmful substances. For the manufacture of furniture item, you can use a natural pine bar. It is easy to process and absolutely environmental. To make you need:

• furniture shield with a thickness of 20 mm for seating and backrest;
• bar 40 * 40 * 210 - 2 pcs.;
• bar 40 * 40 * 450 - 2 pcs.;
• bar 20 * 40 * 160 - 4 pcs.;
• bar 20 * 40 * 200 - 4 pcs.

Pine bars can be purchased in finished or cut independently. If it is decided to cut a solid bar or a board with their own hands, it is important to closely monitor the perpendicularity of the lines of sawing.

After purchasing the furniture shield, it is necessary to cut 2 blanks from it: 280 * 150 mm and 280 * 260 mm. When picking, it is important to carefully check the correspondence of the angles and the parallelism of the lines using the construction corner. Only the perfect compliance will save the future children's chairs from distortion and gaps, which kid can be born.

Preparation and assembly

Diagram of the device of a children's chair: 1-Top cross; 2 - rear leg; 3 - carved crossbar; 4 - average crossbar; 5 - Boards for the seat; 6 - lower crossbar; 7- lateral crossbar and kard; 8 - front leg; 9 - front crossbar and kard.

Before proceeding directly to the assembly of the product, all the details must be thoroughly prepared. Depending on the quality of wood processing, it is necessary to use grinding or sandpaper. If there are irregularities and web loops on the bars, it is worth using sandpaper in the following sequence: rough treatment - grain 40, intermediate - 80, final grinding - 120. Only after the bars will be shown in the proper form, you can begin to assemble the chair.

Details 40 * 40 mm are the legs of the future chairs, respectively long bars - the basis of the back. Details 20 * 40 jumpers fixing legs. You need to act according to the following scheme.

1. All 4 legs of the future product should be arranged vertically and bore jumper brushes at a distance of 10 cm from the bottom edge.
2. After that, attach the upper jumpers back to the top of the legs. For fastening you need to use furniture screws with a big step of thread. Chair frame ready.
3. After that, you can fix the seat and back. It is better to do it on the back side of both parts, which will allow you to hide the hats of self-tapping screws.
4. After that, almost the finished chairs need to be created. It must be covered with furniture varnish in several layers and allow it to dry.
5. So that the coating was perfectly smooth, you can disassemble the product again and process each item separately. This method will avoid lacquer flocks and drops that can spoil the final type of chair. Collect furniture can be collected after a complete drying of the coating.
6. After the smell of means for processing will destroy, you can give a new ready-made chair to the child.

Highchair for feeding from old chairs

You can also make a comfortable haul for feeding. Since this piece of furniture is used for a short time, the family budget is not always appropriate to spend it. All that will need is two old durable Soviet chairs and two wooden slats. And, of course, a tool that will be found from any homeowner.

It is important that the chairs are reliable, equipped with straps connecting the legs, these details will serve as side handrails that ensure the safety of the kid.

One of the chairs should be turned over and arrange as shown in the diagram. The back of the lower stool will perform the function of the front legs, it must be strong enough. The rear legs of the lower chair must be additionally copped with a plank. After the approximate frame will be ready, with the help of wooden plates both stools need to be combined into a single stable design.

For seats, backs and countertops, you can use any smooth boards of suitable size. You can enhance such a chair using a soft pillow on the seat, it will make the baby feeding as comfortable as possible.

What method of manufacturing a children's chair would be elected, it is important to take care of the safety of this furniture.

All varnishes and materials for processing should be non-toxic and completely dry until commissioning. For upholstery, it is better to use leatherette, it is pleasant to the touch and easily washed. Hats of selflessness should be sufficiently bundled and closed with smooth plastic plugs. And, of course, all items must be carefully processed using sandpaper.

And the decoration of new furniture can be trusted with its new owner. Joint creativity will allow you to get close to the child. And the baby will always be proud that the native person personally made him such a practical and beautiful gift.

We collect a growing chair with your own hands.
I think it will be superfluous once again to talk about the relevance of the problem of preserving the right posture in children. One of of most important conditions It is the provision of proper poses at a seat, which depends on the set of parameters. Conventional chairs will not fit. Unfortunately, office chairs with a gas lift are also not able to solve this problem, since there are neither an adjustable footrest, nor adjustment of the seating, and alone the adjustments of the height of the seating and the angle of the back of the back is not enough. In such a situation, a special adjustable chair will become an excellent solution!

On the Internet you can find a lot different options for every taste. From the whole manifold chose the structurally favorite.

The design is not so simple as it may seem at first glance. It is very technological. It is important to take into account the ratio of the size of the elements, their mutual location, strength and sustainability of the entire structure. Of course, no drawings on the manufacturer's website or on the Internet could not find. Therefore, I had to develop the drawings. The more interesting. The design went for several days.

Unfortunately, in my disposal there is no plotter to display images of the desired size, and the program in which I worked does not know how to print large images in parts (or just could not figure out how to do it). Therefore, I had to solve the problem with the neighbral paths. Drawings of parts were saved as ordinary photos with great resolution. Next with help free program Posterazor is converted to PDF documents containing drawings on the desired scale and broken into separate sheets of A4 format.

Do I have the right to publish them? Will there be no copyright? After all, the chair I was peered on the Internet and someone developed him! Let's deal with.

This situation can be viewed from two points of view: ethical and legal. The ethical side of the question is determined, because here there is a whole range of quite reasoned opinions and most likely come to the truth. But from a legal point of view, the search for truth is not so hopeless.

So, legally, a chair cannot be an object of copyright. In this case, according to the GC, it can be either a useful model or an industrial model that is recognized and protected only under the condition state registration, on the basis of which the federal executive body on intellectual property issues a patent. On the manufacturer's website, no speech patents do not go, most likely, no one has a patent. Honestly, I do not see that it is possible to patent - in comparison with the analogues, neither a special novelty or originality. Although the design is quite successful. Yes, and at www.freepatent.ru I did not find it. So, therefore, I do not break any patent rights for the absence of those.

But the drawings, according to the Administrative Code, are copyright objects and are protected without any registration by default, as a type of artwork, (computer programs, by the way, as literary works). The drawings developed by me are not an exact copy of the original, which is not available to me, but are the result of intellectual work and reflect my vision of the design, the general features of which saw in the photos. And on the publication of the results of their work, I have a full right as the author. Unlike those who, without permission and references to the source, places articles from my blog on their sites to attract visitors. You have to install copyrights in the photo.

Well, enough for the bore, it's time for business!
Drawings of a growing chair can be downloaded by reference: https://yadi.sk/d/-ns9on3wmbxdf
If there is no details in the archive, then its description will be further in the text.

We print them as a regular multi-page document on A4 sheets. At the same time, in the print wizard Acrobat Reader, it is important not to forget to specify the "real size" scale. As a result, after gluing individual sheets, we get the drawing of the part on the scale of 1: 1.

Cut the drawing of racks along the contour and stick it on a sheet of plywood.

As a material for racks, a plywood with a thickness of 22 mm is selected. Cut the first part by retreating 5 mm contour. In general, the quality and accuracy of the cut is not very important. If only some reserve remained.

Now the resulting coarse edges of the workpiece must be aligned exactly according to the drawing. Usually, to designate this action, I use the term "combing". To do this, press a flat rack to the workpiece along the drawing line and pass through the edge of the copier with the upper bearing. Roundings processed by directing the milling hand with a subsequent edge of the grinding machines. You can spend more time to spend on this workpiece. It will serve as a template and the quality of the remaining racks depends on the quality of its processing.

Now, having a template, mark and cut out the rest of the blanks for the racks

Next, with the help of self-samples, we fix the pattern on the workpieces. To twist the screws in the template we make holes, in those places in which there will be holes for fastening the seating and footrest. At the same time, the shirl-screw hat should not be issued from the template.

And with the help of a copy cutter, align the edges of the workpiece by template.

Using a milling mill inserted into the table, we make the groove in which the elements fixing the seat and foot stand will move. For simplicity, I decided to call them sluts. The depth of the groove is 10 mm, the width of the groove is 24 mm (it would be more convenient to make a width of the groove, equal to the width of the available plywood - 22 mm, but there was no such cutter in the workshop).

In the middle of the groove at equal distances we make holes. On the reverse side of the workpiece at the point of the drill exit, it is necessary to put the bar to put the bar so that the drill does not break the bottom layer of the veneer. Close or disguise such chip will be extremely difficult.

Similarly, we do with runners. We print the drawing in real size, cut out and glue on the plywood sheet. Next, cut out with a reserve and "combat", as they did with a rack template.

From the same sheet of plywood, 22 mm jigsaw roughly with a margin cut out future runners.

All the same self-drawing fix template on the workpiece

And on milling table With the help of a copy cutter, align the edges of the blanks on the template.

With the help of the edge cutting milling cutters, twigrate the edges on all the resulting details. Radius of rounding 4.8 mm.

Next, the rail is cut, with the help of which the runners come into engagement with the groove on the racks. Rake height 20 mm, width 24 mm. Because Nor 20 mm, no 24mm plywood I did not have, rake was decided to make a massive ash. This wood has excellent strength characteristics.

In the runners on the milling table, an appropriate chute was made and rails are glued into it. At the same time, when you do a chute, you must not forget that the runners are right and left.

After drying glue, the rails are cut and covered with a flush with a slut. Also in runners made holes for fixing them on racks.

Also in runners are erected in parallel floor. The depth of the gutter is 10 mm, width 16 mm. In these gutters will be recorded seating and footrests. On the next photo you can see ready-made slides.

Similarly, we do with the seating patterns and foot stands: We print the drawing, glue it to the phaneer and cut out the workpiece.

In order to make smooth roundings used a thin rail from 5 mm plywood passed between self-draws defining the desired radius. It bends well and creates smooth transitions. How it is done in the photo:

As a result, we get two templates - footrests (left) and seats (right). Next, we work with them along the already spent scheme - place the workpiece (we supply the templates with a pencil) and cut them with an electrollized with an indentation of 5 mm. For them, a 16 mm plywood is used, although it is possible to 22 mm. Fix the template on the workpiece using the screws and we work out the edges of the copier. Having ready templates All operation takes a few minutes. The smallest holes left on the finished parts can be either just ignored due to their minor size, or hide with putty at the grinding stage. Personally, I went on the first way. Do not forget to round the edges using the edge steam mill.

The template for the back did "in place." Therefore, there is no drawing back. The upper and lower edge did on the seating pattern. The height of the back is 100 mm, width is 464 mm (the depth of the groove for the backrest in the racks is 10 mm). After the template is ready, we make a pair of backs over it with a pair of back in a few minutes using an electrollized and copy cutter.

Total three crossbars in the chair. They are made of the same sheet of 22 mm. The dimensions of the crossbar fixing the slots 399x50x22 mm. Lower crossbar (at the bottom near the floor) - 444x30x22 mm. With a straight cutter 10 mm, we make grooves for secret furniture nuts - barrels.

Next, we make a groove for the back. Gulbery tilt the back chose in accordance with GOST 19301.2-94. "Furniture children's preschool ..." the angle of inclination of the back on it is at least 5 degrees and more. My stool has an angle of 11 degrees - it seems to me a very comfortable angle.

We get a small pile of details

Each chair is assembled on the hexagon bolts and furniture hidden braid nuts. Bolts have dimensions of 6x70 and 6x50, nuts - 10x20 and 10x12. The fastener set is presented in the photo.

Ready. As they say, "Looks like the truth." When assembling, the quality of manufacturing and fitting parts is checked, small disadvantages are eliminated, "refinement with a file" is being performed. On this, the pylon-drilling-milling stage is completed.

The grinding and painting stage begins. Now the chairs are completely disassembled and all parts are grouped before applying the coating. Used paper 180. Somehow I had to convert 80 and even 40.

Painting works are separate discipline. Poor finish coating can spoil all the work. Winter on the street and the lack of heating in the workshop introduced their own adjustments to the usual process. Painting the chair had to go straight at home. Therefore, neither kraskopultum nor multicomponent stinking varnishes cannot be used - only inappropriate water varnish and brush.

Because The chair did from the remains of plywood, some details had contaminants. Unfortunately, it was not possible to completely get rid of them with grinding, so I decided to cover one chair dark color - "Mahagon", the second - glossy opaque enamel of dairy color. While ready only first. The second, milk, is waiting for its time.

If, after applying the first layer of varnish, the color is unevenly, the details due to varying degrees of absorption are coated with oscillates, the pile has risen and the surface has become like a sandpaper, and in general it looks terrible and want to quit everything, then you are on the right track. After drying the first layer (three-to-four hours), we take the emery paper with graininess 180 and grind all the rissed pile. Next, we put the second layer, after the drying of which the surface has become a little better - there is no pile and the color left smaller, but still far from the picture on the label with varnish. Therefore, we mature the details of the same sandpaper and put the third layer. Behind him fourth. Etc. We continue until the result becomes satisfying you. For this I had enough five layers, which were spent two days.

Growing chair is ready. The cost of two chairs is a sheet of plywood 1500x1500 mm thick 22 mm, fasteners on 50 p. And bank varnish. This is also electricity, depreciation of fixed assets, work salary.

I saw similar designs of 250 US dollars on Amazon - not the price, but some kind of tin. We, of us, of course, are much cheaper.

Despite the dubious design design is quite thoughtful.
This is not just a children's chair, it's rather office furniture for a schoolboy. Because it is schoolchildren who hold many hours first at the lessons, and then behind the computer games and for them, the correct convenient posture for posture, less fatigue and preservation of vision. At the same time, schoolchildren also grow actively.

For greater comfort, you can make removable soft linings on the seat and back. As an option. But I do not see much need - usually school furniture without pillows. The armrests are also without much need, because during the letter or when working on the keyboard, the elbows should freely lie on the table so as not to cause voltage in the shoulders. All these calculations are described in general, the set of guests and the growing chair corresponds to them. In general, I am satisfied with the result.

You can purchase some things from this blog in our Vkontakte group:

One of the positive moments coming in favor of wooden furnitureThis is what really make a wooden chair for feeding with your own hands. Naturally, in the case of twins you will have to do two chairs at once. Note that usually homemade children's chairs for feeding from wood are different - classic folding, transformers and growing.

In this article in the style of "for dummies" we will tell how to make a chair for feeding with your own hands on the example of a wooden chair-transformer. We will show two working options for feeding with their own hands with drawings and sizes, as well as conduct some considerations about their occasion.

ATTENTION!!! The article turned out long, as we write not only for experienced mastersBut for beginners, as well as people who rarely make anything with their own hands. If there is no desire to read everything - use the table of contents. Pop-up headlock tips will help you understand what is there, and choose the desired one.

If you want to make a chairs for feeding with your own hands, but not a transformer, or everyone knows how to do and love brevity, also not trouble. Over time, at this place will be a link to the entry, where information about homemade stools for feeding will be collected in one bunch. In the meantime, we look at the site map and heading, there are articles there.

The content of the article:

Highchair for feeding with your own hands - why a children's wooden chair transformer. MOTIVATION

One of the great advantages of children's wooden transformers for feeding is that the design of the chairs to the limit is simple, so they can really construct themselves even a newcomer. You can make such a chairs for feeding with your own hands either from the girlfriend, or without any problems to purchase the material at a small price.

In the article, a children's chair for feeding with their own hands, we considered in detail how the folding chair was made for feeding. It turned out that he was pretty simple. That's just his relevance is very doubtful - wooden furniture is always bulky and heavy, and in two years such a chairs will have to be disassembled on parts and make a separate children's table and a chair.

But the chair - the transformer immediately "kills" two hares: he and a chair, and the table - the party. At first, the chair is used in direct appointment, together with a small table, and then, after 1.5 years, it is understood, and the child has a separate desk and highchair. Convenient and practical. Perhaps this is exactly what is constant interest in the Wooden Stulcher to feed the feeding made with his own hands.

It remains only to figure out how such a miracle of technology make themselves. And at the beginning, let's see the video of one of the craftsmen.

Feeding chair with your own hands or a wooden chair Transformer for feeding a child with his own hands start work

Searching in the Internet on the topic of a feeding chair with your own hands, it will become clear that there are two variants of the transformer chairs.

The first option is more complicated, but it is for some reason that he is popular on the Internet. Most likely, once someone made a wooden chair transformer for feeding with his own hands in this way, and then the articles on how to make it independently miraculously unfortunately. Because where to take the correct option is not clear. We give here the most understandable (for the author) description and sane drawings.

The second version of the chair for feeding with their own hands is simpler and logical, it is according to it that are made by factory wooden transformers. And we also give it here with our own measurements.

If everything is clear with the material and interest to the stool for feeding with their own hands only drawings and sizes, then immediately go below to parts how to make a chair for feeding with your own hands - option 1, and how to make a children's wooden chair for feeding with your own hands - option 2. Ah So far, since they decided to keep a story in the style of "for teapots", then let's talk about the materials used.

Highchair for feeding with your own hands - Materials

To make a chairs for feeding with your own hands wooden bars. A boards can be added with a thickness equal to the thickness of the bar. Plywood or LDSP, selflessness, glue, tissue washing upholstery and any soft filler. Well, still brackets for the construction (furniture) stapler.

A timber can be used by any, which is sold or is in the presence. It would be better that he was oversized. So it is less than about it. Otherwise, he will have to the pussy himself and do smooth. It is convenient to take the size of a bar of 20x30 mm.

As a tabletop for the table, the desktop and a small removable table for feeding for feeding will go litsp or thick plywood - from 10 to 15 mm thick.

Solid pieces of the back and seating of the chair for feeding with their own hands can be made of fiberboard or plywood. Faneur does not have to use thick, enough from 5 to 10 mm thick. In general, the plywood will be stronger, but in the Fiberboard it is easier to enter a staple bracket.

Some details are glued together. To do this, you can use carpentry or just glue PVA.

To make a soft back and seat chairs for feeding with your own hands, it will take an external upholstery - a durable easily washing fabric, such as a cloak or bologna, or just a glued, and inside a soft filler - foam rubber, batting or something else. Quantity See yourself how much you need. The soft filler can be glued to the solid parts of the back and seats, or simply begged it with a construction stapler, and you can combine both options. The upholstery is easier to fix it right away. So it will be more reliable. The size of the bracket depends on the stapler and the selected soft upholstery thickness.

It is still nice to have an average sandpaper, for the sump of the details and give it smoothness.

In the first version of the chairs for feeding with their own hands, only 4 tree screws are used: for attaching the table top to the desk. All other wooden parts will be connected to homemade drains, also from wood. You can put the remnants of bars.

In the second version of the chair for feeding with their own hands, there is practically no dumb, but there are many self-tapping screws to fasten all parts of each other. Factory transformers are made on the euro of self-drawing, and a children's wooden chair transformer for feeding with their own hands can be collected on any. The main thing to collect correctly. Sucks are used only if you decide to make rounded items that are conveniently fixed to the bars with their help.

In both options wooden table. And the chair for feeding with their own hands has rounded items, although you can do without them. These elements can be made either from the boards with a thickness of the corresponding thickness of the bar used. If the bar is taken, as here, 20x30 mm, then the board takes a thickness of 20 mm, but you can and 30 mm, it, depending on how you put the bars, joke g). If there are no boards, then the same bars are perfect. Only they need to glue together.

Depending on how much and how you place the rounded items for cutting on the board or glued bars, the length of them (boards, bars) and you need to take. On glued bars or board, it is necessary to put 4 elements at once. Therefore, the length will be from 0.5 to 1 m, and maybe 2 m are not enough.

Feeding chair with her own hands - Separate words about wood and paintwork

I propose to pay attention to the stool tree material for feeding. Immediately, we note that the children's wooden chair for feeding with their own hands is best made from the linden. However, like any other children's furniture for kids. Since the coniferous breeds are often used in the manufacture of wooden furniture. The trees can not approach: pine highlights a resin that is very toxic. And child health is better not to risk. However, in construction stores often lies with pine, therefore we try to take as dry as possible and without intelligence of the resin. Believe me, the child will be better, and you yourself do easier.

To impart brilliance, colors and protection from ambient It is better to use acrylic varnish, or paint. It is not so harmful to the baby, like the rest. Why he is he? Answer - what if the kid will try a table or a chair for feeding, which you yourself made your own hands? For the consequences to answer you. Although if it does not care if you have it possible to get them, then you can cover the feeding chair with your own hands than it will want.

Children's chair for feeding a wooden transformer with their own hands - Option 1

For understanding that he will represent the highchair for feeding with their own hands in the form of composite parts of option 1, give drawings and sizes.

To make parts of a children's highchair for feeding a wooden transformer with their own hands, we take the timing with a cross section, for example, 20x30mm. From it we will do the following details. Indicate the length and quantity.

• Legs - 390 mm, 4 pcs.
• Rounded parts - 4 pcs.
• Armrests, they are the top of the high chairs - 195 mm, 2 pcs.
• Planks, walking parallel to armrests, they are crossbars, 335 mm, 2 pcs. On these crossbars, then we will clipped the seats with the crossing chairs for feeding
• Planks on which the seat and back are attached, they are accepted - 300 mm, 3 pcs. Two for seating and one for the back
• A small table on the chair (in X W) 340x340 mm. It lies on the armrests of the chair 340 mm \u003d 300 (the length of the stool is the chair) + 20 + 20 mm.
• The seat and the back have the same dimensions (in x x) 250x290 mm. The width is 290 mm \u003d 300 (the length of the bar is crosslinked) - 5 - 5 (gaps on both sides for upholstery and soft filler), mm.

• Legs 500 mm 4 pcs.
• Planks for the lower and top of 410 mm 4 pcs. On the bottom straps, the table for feeding is worth, on the top mounted countertop.
• Cross slats 340 mm 4 pcs. To bore the sidewalls of the table. Length 340 (mm) \u003d 300 (length of chairs) + 20 + 20 (mm). So done so that the chair gets up between the sidewalls of the table.
• Countertop (in x W) - 440 × 380 mm. 1 PC. The tabletop lies on the upper boards and is not issued beyond the limits of the sidewall. Width 380 (mm) \u003d 340 (transverse strip length) + 20 + 20 (mm). Length 440 (mm) \u003d 410 (Top Planck Length) + 30 mm

How to make a chairs for feeding with your own hands

Begins work from the chair. For this, according to sizes, the desired length of the bars are fixed. Separately, you need to make rounded parts - they connect legs and armrests in front and rear. Naturally, all dug details need to be made smooth, without a pile and with special care to treat emery paper - small children are always increased injury. Danger. Therefore, to the question of how to make a chair for feeding with your own hands, we give a pathetic answer - we work for conscience.

Roundings for the wooden chairs of the transformer for feeding with their own hands are cut separately - according to the drawing. For rounded parts there are one Important moment. If you glue the bars and lay the part with wood fibers not as shown in the figure, then such a part when drinking, or further operation can be mad at the most unexpected way. Therefore, the bars need to glue with wood fibers in parallel to each other. And it is necessary to have a rounded part of the chairs for feeding with your own hands along these parallels. The same goes and the board - the part for drinking, we have parallel wood fibers.

To successfully glue the bars using joiner and pva. Additionally, the bars do not need to align. For bars, it is necessary to choose enough flat planes, correctly arrange them and just rush to the clamps. During the day, probably dried.

Then from the waste of bars for the stool for feeding with their own hands, you can make rectangular ducts. Dimensions - 8x20x50 mm. In general, the length of the sewage should be made by 4-5 mm less than the total depth of the groove of two fastened parts. The edges of the sewage can be slightly rounded.

On all the details place places for landing the wanks. To do this, it is necessary to place the contours of the groove, for example, a pencil. Rectangular grooves for the wrenches need to make a depth of about 30 mm. To do this, drill a drill with a diameter of 6 mm 4-5 holes. Next, with the help of the chisels, align the walls of the groove and fit under your own, individual, homemade wanks. And if there is a milling mill, then the grooves make a mill, so easier.

When all the details are ready, there are seas and grooves for fastening, you can start assembling the children's chairs for feeding a wooden transformer with your own hands.

Wooden chair transformer for feeding a child with her own hands - assembly

Wooden chairs Transformer for feeding with their own hands begin to collect with sidewalls. First one is done, then the second. On the wanks to draw in the middle of the length line. Using a light hammer to install to the lined line. Then we take the part connected and insert the wanks into it. We connect the details at first to dry, i.e. without glue. After all the details of the sidewall are connected, check for the presence of slots. If everything is fine, we gently divide the parts and sample the ducks, and then we collect again, as described above. Then you need to pull the items and give dry, about 1 day. You can roll with clamps, or firmly wind up with a rope from two sides. But at the same time to look so that nothing has twisted, and there were no cracks. Rope is less reliably than clamp, but not everyone has clamps of such sizes.

So far, the sidewalls of the chairs of the transformer for feeding the child can be done by doing their own seats and backs. They are cut out of plywood or fiberboard, according to the drawing. If the plywood is not thick or used fiberboard, then it is better to cut 3 parts of the seating and back and glue them with each other. We wash glue and clamp the clamps. Such a day.

After the sidewalls, the seat and back are assembled and cut, we collect everything finally. On the seat and back with the planned reverse side of the wooden chairs of the transformer for feeding a child with their own hands, you can immediately attach the planks crossing. To do this, use either the seasons, or what will be even easier, small self-tapping screws. In order to succeed normally, the planks should be fixed with gaps of 5 mm on each side of the width of the seating and the back. The back and seat can be combined with a metal corner, or bent along the metal strip.

If we do on the sewage, then in the seat drill holes for fastening to the cross the chair. Bashed better on 4 pcs. Standard cylindrical waders. For the back of such waders - 2 pcs. We connect the sidewalls by crossings on which the seat will fall. We do without glue to check and see the positions of the seat and back. Also without glue, we plant the seat on the crossbars on the seasons. Flexing and flexing the back, mark the position of the bar for fixing the back, then disassemble. If there is a desire, you can cut the side bar for the back according to the drawing. There is no desire - everything will be fine too.

At the children's chair for feeding a wooden transformer with their own hands we are wearing a sidew and a back of a soft filler: glue it to a solid part or nailed with a stapler. Then with again with a stapler, stretch the upholstery. It is better not to save, and do not try to the upholstery and the soft part is to fix one and the same bracket. Maybe something to twist, and it will be not good.

Then we collect all the parts on the woven wrappers. We put in place, check the corners. Plank the backrest is kpripim to the back on 2 cylindrical ducts. Check the gaps and tighten with clamps or rope. We are waiting until he dries. All, chair from a wooden chairs of transformer for feeding with their own hands is ready .

We repeat. If there is no desire to mess around with the seats, all parts are actually connected using conventional screws. Perhaps it will not be so firmly, but it is easier to assemble. Deciding, of course, master. And the roundabilities are more convenient and durable to fasten with the help of the wrenches, and then thoroughly wrap them with glue. After that, leave the finished sideline on a day to dry.

The last step: cut out, according to the size of a small table on the chair for feeding with your own hands. It can be left rectangular, you can round in the part of the closest to the child. This is not fundamentally. Only the case of aesthetics and coming. This table is attached to the edges of the armrests. It is possible on cylindrical ducts, you can on self-drawing. And when the child is growing, he is simply removed and everything, he is no longer needed.

The table for the feeding for feeding with her hands is also assembled as a chair. At the beginning of dry, then with glue. Used either homemade drums, or self-tapping screws. We start with sidewalls. We attach the top and bottom planks to the legs, two rectangles are obtained. When the sidewalls are assembled, they are, like a chair, you need to pull and wait a day while dried.

Further the transverse bars are fastened - with their help the sidewalls are connected. Scrolls for feeding table with their own hands, attacks according to the drawing. The general meaning is that they are at no distances from the edges of the sidewall. On the lower, which will be closer to the edge, stand the legs of the chair in the position of the chair for feeding. And the top serves as strips for the legs of the chair, so that the chair stood is firmly.

Drinking from plywood or LDSP Countertop is mounted on top of the top pieces of sidewall and screwed up with self-draws. Everything is going together and tightened as usual, we wait until dried.

When the table is ready for feeding chair, turn it into a stool transformer for feeding a child. To do this, connect them. The table turns over, the countertop turns out to be behind, and the chair is put on the transverse planks of the table.

Table Transformer For Feeding a Wooden Wooden DIY - Latest Strokes

Finally, when the chair and a table are ready, for the last time we check for roughness and squeak, if they found it.

When the chair and a table of a transformer for feeding a child's wooden hand are made with their own hands, they are worth fully staggering - varnishes to use exclusively non-toxic, or paint acrylic paint. To pre-give the desired color you can rip and dry.

Everything, the first option is ready. The most adequate description was found at http://mebelsam.com, from this site was taken by a note on the first option.

Children's chairs for feeding a wooden transformer with your own hands - Option 2

To understand that he will represent a highchair for feeding with their own hands in the form of composite parts of option 2, give drawings and sizes.

To make parts of a children's highchair for feeding a wooden transformer with their own hands we take the timing with a cross section, for example, 20x30 mm. From you need to do the following details: indicate the length and quantity.

Size for feeding with your own hands Size spare parts, Length and quantity

If there are no rounded parts

• Legs 450 mm 4 pcs.
• Armrests - 365 mm 2 pcs.

If there are rounded parts

• Front legs 450 mm - 2 pcs., Rear 390 mm - 2 pcs.
• Armrests - 290 mm 2 pcs.
• Round item according to the scheme - 2 pcs

General

• Lower strips on the sidewalls 365 mm 2 pcs.
• Cross bars 350 mm 4 pcs. They attack the seat and back.
• Seat (in x x) 290x330 mm
• Back (in x x) 450х330 mm

Size of spare parts, length and quantity

• Legs - 450 mm 4 pcs. Legs located in the middle of the table, and are the bottom straps of the sidewall.
• The lower and upper crossbars, in which a table for feeding stands in the position of the desk-part, and to which the countertop is attached - 500 mm 4 pcs.
• Cross slats 410 mm 3 pcs.
• Countertop (in x W) 500x510 mm
• Straps fastening for stool legs 230 mm. Attention - in the diagram, the thickness of the bars - 15x15 mm, but anyone can use. For example, the same 20x30 mm.

Wooden chair transformer for feeding the child with her own hands - the main differences from the option 1

The previous part about the wooden chair transformer for feeding the child with their own hands turned out to be too voluminous. Therefore, in order not to write a sheet again, let's say that everything is done according to the drawing and size similar to the first option.

The wrenches are not used, the elimination rounded parts of the chair for feeding. They are done, as in Embodiment 1, only have other dimensions. Everything else is fastened on self-drawing. You can regular on wood, you can euro. If you use Eurosamores, then place the places where they should enter. And at the place with a smaller diameter, drills the hole for them.

Highchair for feeding with your own hands - make items and collect

Bruks are cut down according to sizes. Carefully processed by sandpaper. A cardinal difference from the first chairs for feeding with their own hands is the lack of special round parts. But since sharp corners are an increased danger to a small child, they need to round. A little curly on one side precisely the top parts of the knock legs. And also twist the two bottom crossbars of the table - the legs on which it is worth.

You can still in the sidewalls between the armrest and the bottom plank, to which the seat is mounted, insert several strokes, rectangular or round is irrelevant. You can accommodate them anywhere at any distance, the main thing in the area of \u200b\u200bthe seating. It is that the kid does not pack through the sidewall, and for beauty will go.

Another touch.
How to make a chairs for feeding with your own hands with a movable back? It can be done so that the back of the chair for feeding made by their own hands took several positions. You will have to tinker.

For this, the rear legs and armrests are bonded with each other with a round part, as it was in the first version. In this case, the size of the armrest and the rear legs will be others (see description of the sizes of the chair). In the roundabout you need to do a hole where the screw will be inserted into the end, with a pen - a fixer at the end. The screw is one side to the back of the chair, the other rides this hole. The handle screws out the edge and fixes it in the desired position. The back is fixed.

The hole can be made either by the mill, or make some small holes with a drill and then modify the chisel. The size of the opening depends on the screw used. The handle can be anyone you are comfortable. In the handle, we carefully choose the groove under the nut, which actually will screw themselves on the screw and fix the back of the stool. The screw itself is conveniently fixed not in the back of the chair, but in the upper cross.

Once again, we note that the rounding of the chair for feeding with their own hands is more convenient and better to fasten with the help of cursed wanks. On self-drawing will be uncomfortable and paint.

Specifically for the kid, such a version of the chair is very convenient, but to make it, you will have to make some efforts. If there is no desire, then really do without a mobile back, then it makes no sense to make a separate rounding. Just tilting the back as you and the baby are comfortable. We place the place of touching the top transverse plate of a plaque back and sidewalls. Drills there hole. We fasten the sidewall and the back of the self-tapping screw. So from each sidewall.

When the sidewalls for the children's chair for feeding are assembled with their own hands, two transverse fastening strips for seating and one on a movable cylindrical seating for fastening the back are screwed to the lower straps of the sidewall. The movable wanking means that one of the grooves into several (mm) is greater than the diameter of the sewage.

The back and sesidement is also made as in the first version. Only sizes here are a little others - a longer back. For the baby it is more convenient. It is also not necessarily a seat and a back to fasten each other, they are enough to attach to transverse boards, and in consequence to make soft and cutting, for example, with a glue. Before the upholstery, as usual, whirlpool and paints.

All, highchairs for a children's wooden transformer for feeding with their own hands is ready.

Hand-up table for feeding with your own hands

The table for the feeding for feeding with their own hands is going in the same way as in the first version. First sidewalls. When the sidewalls are assembled, they are bonded between themselves transverse straps located below - they also serve as supports on which there is a chair in the assembled form. This is important, since they are installed on them, and it plays a role in its solid installation.

This is distinguished from the previous version - in the middle at the bottom of the table there is no extra crossbar, which makes the table not closed, and a more comfortable child to sit behind him. At the same time, two crossbars go only from the bottom, where the countertop is attached - cross-one. When everything is collected, it remains to scout a worktop.

There is one point here.
How to make a table top for a transformer chairs for feeding with their own hands? The figure is given a scheme and dimensions of the option with grooves. For simplicity, the table top for feeding with their own hands can be simply placed on the bars, and they can be done in the factory - to hold between the bars. The first option is easier, but the self-tapping screws will be visible at the most suitable place. The second will require more about it, but more beautiful. To hold between bars, you need to make grooves in them. This is done without any problems with a mill, or just a bit, but it is longer in time. Accordingly, the sizes of the countertops will be different. The groove is washed away to do in the thickness of the table top and a depth of 5 mm.

For greater stability of the stool standing on the table, in the assembled form of a children's chair for feeding a wooden transformer with their own hands, you can additionally make four small lumps - two on each side. They are located under the table top, it is better to put them on the "fact". Those. When the table and chair are ready, put a chair on the table above, as it should be in the end. Location from the inside on the sidewalls of the table, where the legs of the chair are held closest to the tabletop. On the sides parallel with the markup, we embarcate to the sidewalls of the table, these lumps, one on each side. As a result, it should be possible, so that the legs of the chair, closest to the tabletop, passed between these bars, and they, in turn, do not give a chair to move in different directions. This gives the chair additional stability.

A table for feeding is ready for feeding.

Highchair for feeding with your own hands - the result and some conclusions

As usual, summing up, arguing on the topic, what is easier - to keep a chair for feeding with your own hands, or buy? The answer is unequivocal - buy. Moreover, wooden transformers are very common today and are inexpensive. But there are people who want to attach their own efforts and fantasy, and maybe someone did not disassemble the ruins of their building materials. Then in the way - creativity was valued at all times.

The first option, of course, the most common on the Internet, but it is not the easiest. There you have to mess around with the seasons, make the grooves, glue the details. Excellent, if there is a special large clamp, since the usual rope can squeeze the item. And the details, if not squeeze at all, it may not work at all. In short, there is a lot of freight. In addition, over time, such a product will definitely disappear, remember the old digging chairs. And your child definitely shakes the finished highchair for feeding with your own hands done by you.

The second option is not distributed online. But this chair for feeding with their own hands is similar to the factory stool transformer. Collected on self-drawing. The main thing to ensure that when assembling, the mating parts of the details stood under 90 degrees to each other and did not twist. Missed little. Only if you want to make a movable back with a rounded item, then you have to sweat.

At one time, when they wanted to make a highchair for feeding a wooden transformer with their own hands, we were known for the first option. But he seemed to be complicated. And then, when they bought a factory, found it sizes and realized that he was not worse, and maybe better first option. If I had to do another time, it would be chosen the second option.

How to make a chair for feeding with your hands video craftsmen

In principle, each craftsman makes his stool transformer for feeding with his own hands. So to speak under your needs and with your capabilities. Here are collected the most understandable and popular video. It will become clear that the timber can be of any size. The dimensions of the stool-table for feeding, can also be any. The main thing is to catch the essence of the design and sequence - how to make a chairs for feeding with your own hands.

One of the founders of the encyclopeta Denis Didro familiar lady asked once: how do you need to start typing a child? "And how much?" - Interested in the answer. "Oh, he is only one day!" The philosopher shrugged: "In that case, you have been late for the day."

The children's chairs will need a child on the first day of his life, and when the baby will start to sit on his own, about 6 months. But his role in the formation of a new person was not small. First, the formation of the musculoskeletal system and the correct posture begins on the chair. Secondly, a child learns to handle things from the chairs. This is his first property that is not a toy. Children who have grown on his knees at mom or grandmother, are on average getting worse with the surrounding and weaker implement their abilities.

The interests of the parents, too, of course, cannot be discounted. The feeding of a small child often causes a storm of emotions that parents at the moment may simply be tedious. Feed something tagged with yula on the knees, calmly and goodly, is worth a large stress; The child feels and only the forest starts that he does not go for the benefit. In addition, you need to protect your clothes, carpets, furniture from the salts of porridge, soup or mashed potatoes.

Therefore, from a fairly large number of varieties of children's chairs, the first to the importance and time of the start of use is a halter for feeding. A little later, about 4-6 months, it will take a chairs of the game / worker. In this order we them and we will deal with.

General requirements

To make a useful and comfortable chairs for the kid with your own hands, you must first take into account ergonomics.

First, chair for children younger ages should not be too soft: In order for the backbone of the child to grow properly and the muscles developed, his body should feel a reliable support. Highchair It is advisable to do generally hard, but on a chair for feeding and working relatively thin soft linings on the seat and the back is needed. The gaming and working chair is most often the same as being here?

You can combine these conditions, sewing in size sizes and backing the pads of the following structure (bottom up): canvas or burlap - syntheps 5-7 mm - flannel, hawk or bike - decorative fabric. To fix them, you will have to sew straps, tie / fastening under the seat or beyond the back, but it simplifies the manufacture of the chair itself and care for it.

Second - Avoid plastics. Polyethylene safety is certainly confirmed for children's items. high pressure (produced without the use of catalysts) and PET, but there are no suitable billets from them for homemade skills. PVC seats covering - relics of the past: when there was no diapers, without it, the density of the skin in the babies was observed more often.

The next moment is the sizes of the chair. The table of the recommended size of children's highchairs for the game and classes is shown in Fig. The main parameter of the choice according to it is a growth group. The height of the back is obtained by subtracting the height of the seat from the overall height of the stool; In the chair for feeding it must be determined separately, because His seat is raised for the convenience of mother. The table is compiled for children's institutions, the sizes of the chair for a child in the family can be found more accurate and easier: we look attentively to whom he went to the growth and complex; Oh eye, eyebrows, etc. disputes later. Then the prototype parent shows on which chair to her / he is most convenient, remove the sizes and multiply with 0.55. A child on such a commander will be well about the year to 4-5.

Note: Based on the foregoing, all sizes of the following samples of products are subject to adjustment if necessary.

Materials

From what to make a chair for a small question is also important. Metal is better or not applied at all, or in a small amount (fastener for example) and so that the child does not have access to it. The children's organism is generally rustier than adult, but the skin of the kids is very sensitive. This is determined by the instinct of self-preservation: the fact that an adult is simply slightly and slightly cool, for a small - a danger signal. Since he himself can not avoid it yet, it has to be called to parents. How - who have children, those know. But they do not always understand why, and from that at least scream himself cry.

For example, in fig. Right - the erroneous use of steel fasteners. "Intensive operation of the corners" not only does not strengthen the design, contrary to the allegations of its author, but for the baby and is traumatic. The adult finger in a corner with a self-tapping screw will pass unnoticed, and the baby can also scratch. In general, scratch children are nipple, but if it is regularly planted for feeding into something biting, how does this chair affect the child's psyche? The question is rhetorical.

Processing and finishing

So, we have almost only wood, MDF and LDSP Class E0 according to the degree of emission of phenol. In the chair for a child of the youightful age, it is still better to do with deciduous wood or MDF, they are completely without "chemistry." Increased sensitivity to resin conifers or traces of phenol-containing connections is observed approximately 1 infant of 400,000, but where is the warranty, what is this not yours? It is impossible to identify in advance.

The chairs for kids are subjected to external chemical impacts of about the same character and to the same extent as the kitchen stool, but the sanitary and hygienic requirements for it is much striking. Therefore, the details of the children's highchair before assembly need to be treated with water-repellent and bactericidal composition, and the finished product is covered with a protective layer.

There are also no alternatives here: the impregnation is a water-polymeric emulsion or, instead of her diluted three-four-lasting plow water. The coating is a water-based acrylic varnish. There are no reliable confirmations of complete security for children of other furniture processing / finishing. Especially take care of Morilok; Children's furniture under varnish is best to leave as it is. Design and decor In this case, the factors are by no means defining.

About Fannery

When making a chairs for the top of the wood, an amateur master (which may be taken for furniture for the first time in life) will have to face a number of technological difficulties, see further acc. Section not overcome without workshop and special tool. To outset maybe plywood; From it you can almost do the same at home. But - not everyone. A simple birch (non-waterproof and non-backed) is unequivocally suitable and also simple construction or packaging. On the latter there is a veneer t. Pine-sucks, searched in winter. Pine-dryness and so hardly contains a resin, and in the process of manufacturing plywood, their remnants are completely removed. These types of plywood are made on casein glue, for children absolutely safe. Moisture resistance and additional strength them are attached to the impregnation described above, but twice: secondly after complete drying (approx. Day) is initial.

About Clee.

For gluing and sizing in the manufacture of children's furniture for a totality of qualities most suitable PVA. Modern furniture PUR glues are much stronger, but also more expensive; For the product, the service life does not exceed 5-7 years, the first is irrelevant, but the second can "bite". But PVA has the following advantages:

• Absolutely harmless and safe, which is checked by more than half a century experience. His, as they say, at least eat; Even having a liquid into the eyes, washed off without a water residue, unless rinsed immediately.
• PVA drums are easily cut by the mounting knife, and their residues are also easily sanded.
• The junction on the PVA can be discharged, heating as it should household hairdryer. It matters if the chair needs to be disassembled and put it for storage until the next replenishment in the family. Also - if you need to replace its individual details as the child grows, see below.

The very first stool

The charts of the device for feeding children are most commonly used, in order of increasing the complexity of the manufacture:

1. Stands / Holders - Boosters - For feeding the baby on an adult chair, tough and soft;
2. Typical (classic) homemade folding chairs for feeding;
3. Children's transformer sets and "growing" (for increased) chairs;
4. Stationary chairs for feeding kids.

The latter are used either in children's institutions for the smallest or in secured households with excess residential area. In the other case, high strength is required for the chair: there will be a lot of generations in the houses, and prestige is important to the wealthy owners, and still design. As a result, a stationary chair for feeding children turns into a rather complicated product, for the manufacture of which special tools and production conditions needed; For example, see the drawings in Fig.

Boosters

These are the prefixes or devices for feeding a child on a chair and at the table for adults. Rigid booster chairs (first 3 left right pos. In Fig.) Save the place in small-sized apartment, Therefore, quite popular.

However, it is impossible to make them fully relevant to children's ergonomics, this is. Second - for children from 6 to 9-12 months. They are little suitable. The third is the soft attachments to the adult chair (the leading manufacturers are investing considerable funds in their development) do not give a complete guarantee that an essay of fidget is delighted with his favorite juice, the side is not falling along with you, booster and father's chairs.

Much practical than soft boosters for feeding babies, which are no longer chairs, and something like a kangaroo bag, on the right on the top rice. It is impossible to use them constantly, there is a risk to ruin the posture of the child. But at the cottage, picnic or on a trip pocket for feeding - the booster is very useful, especially since it will not take place in my mother's bag.

The manufacture of a soft booster for feeding a child is already a more feminine case, because He sews; Patterns are shown in rice; They are given without cutting on processing.

Note: The slings come from the side of the capes on the back of the chair from under the bottom, through the openings are displayed out and tied or fastened.

Homemade Classic

How the familiar folding chair is arranged for feeding the kids at home, and its sizes are given in Fig. Materials - Bar 40x20, 75x20 (footboard and tie legs), 16x25 (Reiki back, seat apron, tabletop frame), board 100x20 (inserts in the front legs) and plywood 6-8 mm (seat, countertop). Assembly, except for hinges - on confirmates (furniture self-proof) 60x6.

Compounds marked with red - hinged: The table leans upwards, and the frame of the rear legs is pressed against the front. Bolt heads (M6-M8) from the inside and covered with plugs, red mark with an exclamation mark. The seat is inhabited on the front support bar on card loops.

To fold the chair, the table first lifted and remove a little back frame of the rear legs. Then the seat is descended itself, and the frame of the rear legs is served forward until the stop is folded. And in the unfolded form, all the kinematics of this chair will stop without additional clamps on the principle of a dead point, and let the small eater be wriggle there as she wants - the chair will stand under it.

The only technological complexity in the manufacture of this chair is the rallying of the blanks for the sidewall frame of the front legs on the knaps (lamellas) in the HSD or the wrenches. But it can be circumvented, if you make the front frame of plywood, see below. Its operational disadvantage is the thickness of the folded package more than 10 cm. For storage room in a small-sized apartment or Chulana in an entrance hall, it happens too much. And here, a plywood comes to the revenue, see below.

Transformers and forgotten

Children's chairs-transformers for all ages are on sale, 3 pos. Left in fig. They are really comfortable and functional, but technologically complex: part of the necessary parts can be made only in the workshop in the factory. Accordingly, the cost of such chairs is quite high.

For repetition with your own hands, the set is the high chair with a table, right in fig. What many do, but immediately finds that the places in the apartment set with a table-flipper takes more than a highchair and a table separately.

But the main thing is that the construction is nonhygienic. When a child is sitting at the table, then the closest to the floor in the position for feeding the edge of the big countertop will be at his hands in the literal sense. And also - the hedes of the legs in position 6-12 months, which now became legs, and even inconveniently protruding up.

Does not scratching and do not give the microcracks of materials. It is impossible to remove from them from them from them, which is necessary for microbes. Sets-invertes for young children are on sale relatively recently, but there are already cases when they became foci of infection. From independently made of wood, danger is only aggravated.

The fashion epidemic on the transformable furniture (in this case, otherwise you can not say) I spawned in general monsters, see fig. on right. Upon reaching the child's "drinking" chairs, the chair is simply ... scolded, and the former support pyramid turns over and becomes the table. With the hygiene of the big countertops, see above. As with a too narrow table for feeding: Food on the mother and on the floor will not be, only if the robot is sediated on the chair on the stool.

And also, first, put yourself in a child's place: from all sides a rigid fence. It remains, as they say, just put on the chain. Secondly, the big table will be unusually roll. Well, did you ever see the tables for adults neat people whose legs converge the book? It's funny, of course, but who will start such a house, perhaps, not to laugh.

"Growing" chairs

In general, if we are talking about a small child, with transformable furniture it is better not to experiment, eliminating proven folding structures. For example, take the "growing" chairs, see fig. left. You can really sit on such a dad, but it will not be quite comfortable at any age. And in order to adapt the chair to the gross for feeding, it will have to turn it into a product comparable in difficulty with a stationary chair for kids.

How to take everything from plywood

Highchairs are very often made from plywood. Many homemade structures are quite practical and good in appearance on the left in Fig. However, according to the pericing of the need to adapt them for something else is still perhaps the first. Second - see right in Fig. Disinted details. Waste of material - on-eye at least 60% Although good faeer can be bought 300 rubles / sheet 1550x1550, it would be all right, it would be desirable to do without anywhere now not suitable crumbles.

Here is the time it's time to figure out that an adult folding stool board from plywood is easily adjusted for feeding the baby, see the next. Fig. Papin for fishing or mother-in-law garden, depending on the one who comes in the family. According to sanitation with hygiene, it is better, of course, to make this chair immediately for a small one, and put it on adult use when he will grow up.

From the remnant of cutting out the opening, it will turn out 2 table of a child with a child with g-shaped paws; Under them in the sidewalls, the stool will need to cut the grooves. To feed the child, such a chair is desirable to complement the cloth back: it does not ignore the adults, and the chair does not hurt in the folded form hanging on the wall. The small countertop is attached to the piano or card loops, then a table for feeding will also be folded into a compact package.

Note: The sizes of the subchoves are better to shoot on the already finished decomposed chair. So it will be easier and more accurate than bothering with trigonometry.

Another folding stool of the same type is shown in Fig. on right. It is smaller, 500x750 folded. Not bad because from the sheet of plywood 1550x1550 there are such exactly 6 pcs., And in length is placed in the trunk of almost any car. The letter W indicates the width of the cut. In general, see your chad, yourself and your needs.

Chairs older

At the age of about a year, the child will already need a chair for which he will be able to sit down, move it, rearrange him. Chairs for young children following age-related babies are playing (left in Fig. Below) and workers / for classes, in the center. Working chairs for kids differ from the game primarily by armrests; They are needed that the child has the right posture. Then, the height of the seat of the working chair can be immediately taken in the calculation of the oldest of preschool age. up to 400 mm. In this case, the footboard is needed; Preferably rearranged. Sample chairs for kids "The second stage" are given to the right, but as it is said above, they need to clarify them by the child.

Highchair drawings for grown children are given on the trail. Fig. Left - game simplest design. The legs of the optimal length for a child 12-36 months, often playing on the floor. Fasteners - Self-tapping screws 40x4.2.

Highchair for a child "like adults"

The highchair on the right is already more difficult, its details need to be placed on the grid and cut the grooves for their connection. But he is universal, gaming and working. Small protrusions sidewall over the seat is enough so that the child is normal active to sleep, the swelling of the fifth point into the air. The height of the seat of 400 mm is the utmost for children of the most youngest ages. It can be done first the minimum, OK. 220 mm, and then change the sidewalls as a teenager; Labor and plywood will go to it a little, but mom will say that to tell the dad at case. So, if the dad is prudent, it is better to immediately cut the sidewall on the increase.

Such a chair in principle is just going as a puzzle. In the mobile version, let's say, for departures to the country, it can be left. But with constant use, the chair will soon be overwhelmed, no matter how dense the joints were neither the joints. Therefore, the home chair to a child of this kind is better to glue PVA. Disassembly, if necessary, put on storage - see above, about glue.

Finally, there is a category of children who, barely realizing themselves in this world, want everyone to have an adult. It's generally useful qualityBut the dad over the chair and other furniture for the child will have to work more. The device and sizes of the children's chairs "like adults" are shown in Fig. on right. A wooden chairs of such a design will require quite complex technological techniques, but in this case plywood will come to the revenue, see the next. section.

Video: An example of a simple mini-chair with your own hands

Technology and plywood

For the manufacture of a chairs, kids from a tree you need to know or will have to master the methods of performing some carpentry connections: on the sewage, with the help of a key (lamellas) and spike grooves. How they are produced, for examples of joinery, see video built in ascending order of complexity:

Video # 1: Connections - Sucks

Video # 2: Corner connection on the keys for framework structures (corners)

Video # 3: Ship-groove compound

Video # 4: Spone direct connection for splitting shields from boards

As you can see, at home simple hand tool It is quite high quality only pos. #one. Pos. # 2 and # 3 at a novice carpenter will turn out manually with sin in half, and for pos. # 4 I. good professional Do not do without a workshop and special equipment. And now - TS-C! - All this can make the house "full kettle", using only the electric bison and a little chisel. If the workpiece of parts to dial on glue from 3 layers of plywood thick, respectively, in 1/3 required. Among other things, this technology allows you to collect details of a complex form from small metering fragments, which makes it possible to be densely, i.e. Economically, crumbling material.

As the direct and angular puzzle connections are made in this way, shown on the pos. 1 and 2 Fig. acc. If spike make trapezoidal with rounded corners, then the strength of the junction will increase several times, i.e. It will be sufficient for adult furniture. In production, this technology is not applied - canite and therefore is unprofitable, but at home so better than buying or renting a machine by 60-100 thousand rubles.

To glue the package of blanks into the PVA detail also do not need any special devices:

• On the smooth floor or table with a polyethylene film.
• Both bonded surfaces are lubricated with a thin layer of glue; It is better to take advantage of the tassel.
• Withstand adhesive layers to semi-dry low, when the glue film starts becoming translucent at the edges.
• Fold blanks in the package and pressed.
• The package includes a package by another layer of film and put into it the oppression of dispersed cargo (books, eg) at the rate of at least 20 kg per 1 kV. M gluedyful area.

Note: Because Billets in the package during gluing can slightly "float", they need to be cut with a 1-2 mm allowance for first processing.

Angular set of spike-grooves must be supported by self-drawing with a diameter of no more than 0.5 thickens of spikes, paired on the spike. For example, if the part is a thickness of 15 mm of 3 layers of 5 mm, then the diameter of the metric is 2-2.5 mm. The glue is applied on the spike and in the groove; The first is introduced into the last, barely adhesive will begin to slow down (after 2-3 minutes), and then the connection is tightened with hardware.

Like screws vintage

In the above, and all other cases of fastening parts by self-draws under them, it is necessary to drill a deaf hole with a diameter in the body (rod) of self-thread screw and a depth of 2/3 of its threaded part. Also in advance the hole is chosen under the head of the self-press. When screwing out the head is embarrassed by putty from sawdust all the same plywood for all the same PVA; In 1, the volume of glue can be introduced to 2.5-3 volumes of sawdust.

Finally

Well, now on the new clothes - new impressions and pleasant appetite. Only Kashka do not shit on joy, the parents tried.