Making a boat with your own hands from rubber, aluminum, wood, plastic bottles photo video. Boat made of bottles DIY boat made of bottles

It's no secret that most of the male population loves to go fishing. Fishing on a boat brings special pleasure and therefore many dream of purchasing this object, and some do it with their own hands.

Materials for making a boat

The Internet is teeming with a variety of creative ideas that can be easily brought to life. By entering any query into a search engine, a person quickly receives the answer that interests him.

And deciding to build a means for swimming on water, you can easily find a lot of ideas that, if desired, you can bring to life. So, what can you make a boat out of? It can be made from:

1. Wood.
2. Plywood.
3. Bottles.
4. Aluminum.
5. Rubber.

Each of the materials listed is difficult to use, because the density is different, and accordingly the quality is also different. But it is worth remembering that each material has its own pros and cons. Therefore, the choice of material directly depends on the period of further operation of the product:

• For example, wood is the most durable material. It is more suitable for long-term swimming on the water and can serve for seven years. It is worth remembering that you need to take a durable tree. It is best to use oak. So there is a high probability of quality workmanship.
• Plywood is no longer as reliable as wood. This will be determined in its subtleties. But, if you do not go fishing very often and want to save money on manufacturing, then plywood is an excellent choice.
• As for bottles, many people ask a completely logical question: how to make a boat out of bottles? Many will think that this is not real at all. But despite all the doubts, the result will be amazing. It will be easy. But in the case of manufacturing, you must try as much as possible so that the result of your work does not fall apart during the ascent to the water.
• Aluminum is also great as a material. It is reliable and can last for a long time. But production from such material will take a lot of time and effort. Therefore, many people prefer a wooden base.

The latter material is very common. After all, all purchased swimming facilities are made from rubber. It floats well and can withstand a lot of weight.

But during production you need to be careful, because one puncture will ruin it. Time, effort, money will be wasted. The process requires complete concentration, maximum attention.

Wood base

For many centuries in a row, people have used wood as a means of transportation on the water surface. At first, these were simple structures in the form of small platforms, later a boat appeared, the manufacture of which took a long time.

After all, it must be of high quality for the safe transportation of goods. Now in our time, if desired, anyone can reproduce the remedy at home.

Simple step by step plan will teach you how to make a wooden boat. It is necessary to prepare in advance long, wide boards that will serve as the sides of the boat. They must be dry, even, and free from cracks.

After preparing the base material, it needs to be processed for easy bonding. The edges of the boards must be cut evenly so that when assembled, the boards touch each other tightly. Next, we begin to make a vehicle. You need to start with the bow. We cut out an additional board that will hold the sides in the middle.

After finishing work on the sides, you need to build the seats. The process is very simple, so it doesn't take long. Wood planks, must be nailed to the sides. After that, the bottom should be installed. It can be iron.

We cut out the desired shape from a sheet of iron, fasten it to a wooden base thanks to the densely hammered nails. The boat is almost ready. It remains to attach an iron chain, which will serve as the basis for the anchor.

Making a boat out of plywood

The construction plan for how to make a boat out of plywood will be slightly different from the previous one. How to make a boat with your own hands, drawings and a description will become a reliable assistant during the process, full information of the drawings can be found on the Internet.

Take a large sheet of plywood, draw the outlines of the product on it, relying only on the drawings. Then cut it out. The model of the tool is ready, it remains only to fix everything correctly. The work must be started in the same way from the boards.

If you want to attach the motor, the tailgate must be reinforced. After properly fastening the bolts, attach the bottom. You need to use glue, resin. You should not regret applying the listed funds, but you should not overdo it either. After applying them, you need to wait until completely dry. Here the boat is almost ready, you just need to paint it at your discretion.

Rubber dinghy

The answer to the question: how to make a boat with your own hands, drawings will be the first answer. Thanks to them, the product will be of the correct shape. Therefore, the first step is to draw the drawings, calculating the smallest details.

After that, we cut out a boat of the indicated dimensions from a sheet of plywood. In addition, we will need boards for reliable fastening of the bottom, a tarpaulin for covering. These materials must be connected to each other using the same glue, resin. Be sure to give time to glue the glue, otherwise the design will turn out flimsy. And your efforts will be wasted.

After that, cover the product with a tarpaulin, tightly attaching it to the boards. Remember, the structure must be wide. Thus, you get a homemade boat. It will not look much like the rubber one that is on sale, but it will provide you with softness and comfort.

For a better understanding of the manufacturing process, you can see how to make boat pvc do it yourself. There, they will explain the principle of work with an illustrative example. After all, reading and seeing an example, repeating actions, are completely different things.

Air boat

After seeing photos on the Internet about how to make a boat out of bottles, many are surprised, asking the natural question: how to make a homemade boat from plastic bottles or how long can it be used?

The manufacturing principle is so simple that even a ten-year-old child can design it. You will need a lot of plastic bottles for production. They must be in perfect condition, without cracks, holes, so as not to let water through.

The amount depends on the desired size of the vessel. Also, the bottles must have caps so that water does not go inside, does not make them heavier. The plastic material must be laid out in the shape of a vessel, carefully fastened together with glue.

Here is the swim tool ready. It is very cheap to manufacture, but not very high quality. There is a high probability that catching on a branch can pierce the bottle, thus damaging the structure.

Aluminum ship

Having learned the principle of the production of previous boats, it is not difficult to guess how to make an aluminum boat. The only difference lies in the material from which the ship will be made. In terms of strength, it can be safely put in second place after wood.

And with quality work, it can last a lifetime.
When doing, remember that it is necessary to attach the materials with high quality, firmly. Because life depends on the quality of work.

DIY anchor

The anchor is the main element of the flotation device. After all, it helps to keep in one place for a long time, not allowing the current to carry the vessel away. In order to attach the anchor, it is necessary to drill a hole in the back of the boat by extending an iron chain, which will become the basis for the anchor.

Next, you need to attach the load itself. It should be a large piece of iron that can stop the boat. It will need to be attached to the chain by welding. Ten minutes - the anchor is ready. This is the easiest way to make a do-it-yourself boat anchor.

Conclusion

Some simple ways will help you learn how to make a boat with your own hands from various materials. Even if the attempt is unsuccessful, the experience of making the vessel on your own will definitely be remembered.

But if, nevertheless, the boat turns out to be good, then it will certainly come in handy both for walks with the family along the river, and for fishing. Therefore, do not miss the opportunity to try to make a boat with your own hands.

Video on how to make a boat with your own hands

A plastic bottle is a very handy material for building a homemade boat. To break through such a bottle, you need to try and that is why the use of empty bottles of beer and carbonated drinks is so convenient for making a small homemade boat.

The first thing to do is empty the containers of drinks. You can, of course, buy empty bottles, but this is not sports. It is much more pleasant to sail on a homemade boat made of plastic bottles, drinks from which you have consumed during a certain period.

So, for example - all winter you can procure material for the construction of a boat by emptying bottles of your favorite beer, and in the spring you can start construction.

Of course, for a serious hike, an inflatable PVC boat is better suited, but you can also organize a weekend rafting on a boat made of plastic bottles.

How to build a boat out of plastic bottles

There are two options in the construction - the more complex one can be seen in the photo above, “logs” are made from bottles to the length of the boat.

To do this, the neck and bottom of the bottle are cut off, the centers are inserted into each other with glue, and the seam is wrapped on the outside with transparent tape.

Such a connection keeps an increase in internal pressure up to 6-8 atmospheres, so that even a sharp impact on the bottom of the reservoir will not break the "log" of the boat.

The second construction option can be seen in the video below - the bottles are tied together using adhesive tape and a net. A homemade bottle boat made in this way is less resistant, but nevertheless suitable for small rafting.

You can also use the option with a frame - then plastic bottles are attached from below in 2-3 layers and the sides are made of them.

Here is another video that shows how such a homemade product can float, pay attention - even a motor is installed on it!

By the way, homemade rafts for alloys were also made using similar technologies in the days of the USSR, only instead of bottles they used balloons, they were inflated and placed in specially sewn covers. Today, balls can be replaced with empty bottles - after all, bottles are much more resistant to mechanical stress, which means that the raft for rafting will turn out to be more reliable.

Take a look at the photo above, on which a similar raft is being assembled. The bottles are combined into bags, and they are already attached to the bottom of the homemade raft. On the water, such a raft will stand level and have a high carrying capacity.

By the way, there is also a real yacht in the manufacture of which plastic bottles were used. Plastiki is the name of this vessel. 12.5 thousand plastic bottles were used to make it and it successfully crossed the Pacific Ocean passing from San Francisco to Sydney.

If you decide to make such a homemade boat, then pay attention to the article

Fans of outdoor activities cannot sit still, especially when the weather pleases with sunny days. I just want to get into the boat, sail away from the coast and go towards new adventures. However, not everyone can buy or rent a boat. The event is costly, there is more than enough fiddling with it. Moreover, special transport is needed to take her from home to the river and back. Craftsmen were not at a loss and came up with a way to make a boat out of plastic bottles that can be kept at home. It is worth finding out how such a non-standard swimming facility is designed.

Materials and tools

Empty plastic bottles are available at any store. But if desired, the required number of bottles can be collected during the winter. For construction works containers with a volume of five to six liters are suitable. The number of bottles depends on the model of the future boat. For a regular punt, 2000 bottles are more than enough.

If you plan to build a large boat with high sides, you need to make sure that there are at least 5 thousand bottles in the bins. It is recommended to store all this stuff in the country. Firstly, in an empty house it is easier to allocate a separate room for this kind of things. Secondly, you do not have to test the patience of household members constantly bumping into lemonade bottles.

All containers must be clean, free from mold and unpleasant odors. It is not necessary to tear off the labels, but outdoor enthusiasts note that the boat looks much neater without pieces of paper. In addition to plastic containers, you should purchase 4-5 rolls of transparent tape in advance. The final amount will be clarified during construction work, but it is better to purchase a certain amount in advance.

Finally, for work you will need sharp scissors, a stationery knife, superglue, a crossbar made of plastic or plywood, small diameter wire and polyurethane foam. An oar for a homemade boat is made from a thick stick and an old beater. First, the beater is wrapped with tape, and then it is tightly tied to the stick. When all the materials and tools are collected, you can start forming the boat.

Preparatory work

Prepare each unit immediately before starting work. For this, the bottles are washed and at the same time it is checked that all containers are of the same volume. Then the so-called pumping is performed. To do this, open bottles are left in the freezer for one and a half to two hours.

Then they are taken out of the cold, the lids are tightly screwed on and left in the sun. As the air heats up, the bottle will expand.

To maintain the pressure at the same level, coat the lids with waterproof glue. This operation is performed with all containers. After that, you can start assembling.

Simple and straightforward

The most simple constructions a raft and an ordinary boat are considered. To create them, they are suitable as regular bottles from soda, and five-liter cans. Despite minor differences, the construction principle is practically the same.

1. Form the required number of "logs". To do this, take two containers and connect them so that the protruding part of the bottom of one bottle enters the concave part of the bottom of the second container. They should be held together with superglue, and then provided with additional fixation with a plastic cylinder. The latter is made from the third bottle - the bottom and neck are cut off.
2. The necks will stick out in different directions. To hide them, you need to take two more containers, cut off the necks, spread them with waterproof glue and put them on the workpiece. For reliability, the joints should be wrapped with wide tape.
3. The rest of the boat skeleton is assembled in the same way.... Each owner sets the length of the plastic "logs" independently. It is important that it is comfortable to be on the boat.
4. From the "logs" made, the so-called floats should be connected... To do this, the logs are connected using a thin wire and wide adhesive tape. Separate joints should be additionally processed with superglue.

If you plan to assemble an ordinary raft with your own hands, all "floats" are tied with wooden or plastic crossbars using wire. Then plywood or a plastic board is laid on the resulting surface, attached with wire to the crossbars and wound with tape around the edges. If you intend to assemble a floating craft that looks like a boat, it is worth making low sides and decorating the bow. For greater stability, all voids between the bottles should be filled polyurethane foam.

As a basis, you can take not only plastic and plywood, but also foam. This is exactly what New Zealander Thomas Davis did, who glued all the bottles together and then attached them to a sheet of Styrofoam. The result was robust design that can support the weight of three adult men without any problems. At the same time, it does not differ in its large dimensions: only 600 bottles were spent on its construction. Thomas is convinced that building homemade boats – The best way fight for the cleanliness of the environment.

Yesterday's garbage is turning into a unique swimming facility, trees do not need to be cut down for this, and beaches and streets are becoming much cleaner.

Canoe

To create a small canoe, you need to collect one and a half-, two- and five-liter containers. Then you should get vinyl tape, scotch tape, plastic sheets, sharp scissors, a knife and a handle for gardening tools. When everything you need is collected, you can start building the floating facility.

1. First, you should collect two "sausages" of the same length from five-liter containers. The bottles in each "sausage" are connected with tape. When both blanks are made, they must be connected using wide adhesive tape. Thus, the boat frame turned out.
2. It is necessary to equip the bottom of the boat, equipping it with "fins" and end elements. This will increase the stability of the floating craft on the water, and it will be easier to control it. For this purpose, containers of one and a half and two liters are useful.
3. The bow of the boat is made from the throat part of a five-liter container. This part should be emphasized by building a hill near it.

At the final stage, the boat is first covered with polyethylene or any other material resistant to the aquatic environment.

To give the boat a stylish look, it is worth covering it with vinyl film and decorating it with stickers. An oar is made from a garden cuttings.

Punt

The optimal dimensions of this boat are one meter wide and two meters long. It is laid out in layers, so a separate well-ventilated room is required for its manufacture. The deck should be made first. For this required amount bottles are laid out flat in accordance with the shape of the future boat and fastened with superglue on the sides. There is no need to be zealous - a 5–6 mm glue layer is enough for the bottles to stick together firmly.

When the deck dries up, you need to start assembling the hull. The execution technology is the same, only the body is made for one bottle narrower. When both layers are completely dry, the containers of each of them should be glued to each other from all sides. In this case, it is necessary to check the correctness of the work. If the bottles look outward with their lids, everything is done correctly.

When the containers are completely dry, you can start connecting the layers. The deck should be shifted down, and it should lie in such a way as to fall into the cavities of the bottles of the first layer. This forms the bottom of the boat. All its elements are overlapped, which ensures the rigidity and stability of the structure.

In order for both layers to "grasp" properly, it is worth holding them under pressure (heavy book volumes are suitable for these purposes).

While the skeleton dries up, the seat should be glued. In fact - another layer, but not very long. First, they wait until the seat dries, and then set it in place and fasten it with superglue. From the remaining bottles, sides are formed, which perform a protective function (prevent water from entering the boat) and give the swimming facility a complete look. For a punt, you can build a homemade paddle, but it's better to get a special one for a kayak. It makes it much easier to steer the boat and keep it on a given course.

Once the famous traveler Thor Heyerdahl made a raft from balsa wood, on which he successfully traveled across the Atlantic and Pacific oceans. Balsa is a very light wood that does not absorb water. If you look around, you can find a substitute for this wonderful wood, these are ordinary plastic bottles, from which it is really possible to build an aphid boat, a simplified version, a raft, and use such unusual floating craft for fishing or recreation.

Many foreigners notice that Russians are very fond of tinkering with their own hands, and making such a boat or raft is cool, cheap, just enough all the materials are available, the design is simple.

A boat made of plastic bottles was first built not in our country, but in some Asian country, but the idea is good and therefore they are trying to repeat it over and over again.

Necessary materials

In order to make this craft with your own hands, you will need the following materials:

• Bottles - your task is to make the boat tough enough. It would seem that the larger you take plastic bottles, the less they will be needed and the assembly will go faster, it is more logical to use five-liter containers. This is true, but you will need to make the boat stiff enough, and to achieve this effect, it will be better to assemble it from smaller displacement bottles. It seems to me that one and a half or two liters bottles are better suited.
• Water-repellent adhesive.
• Scotch.
• Plywood.
• Wire.
• Plastic sticks or wooden planks.

Preparatory stage

Take an empty bottle, close it and squeeze, you will feel that it is quite soft and fragile. To give strength to the bottle, it must be inflated like a balloon with air under pressure. This can be done with a compressor for pumping automobile cylinders.

Then the bottle must be firmly closed with a lid, having previously greased it with waterproof plastic glue.

A simpler method can be used instead of a compressor. If you have a cold pit in your garage, place the bottles in it for a few hours to cool the air in them. When you take it out, close the lids immediately, the air will heat up after a while and the pressure in the bottle will increase.

Only clean bottles are suitable for work, any dirt or labels will interfere with the gluing process.

Initially, decide on the size of the boat, the number of bottles that you will have to collect in advance will depend on this, because you will not find such an amount right away. A small boat made of plastic bottles can be built from 300 pieces, the Chinese used 1500 for their construction.

Since it is necessary to use a compressor and toxic glue, you need to build a boat on fresh air, on the summer cottage or in the garage.

Manufacturing methods

There are a lot of ways to make a boat with your own hands. The most important thing is that the structure can support your weight. The bottles are glued together with the same water-repellent glue, for example, with liquid nails and rewound with tape for strength.

1 way

Initially, logs are made from bottles, which are then connected to each other, forming plastic platforms and already from these platforms a boat or raft is assembled.

Method of making logs

Ready-made, tightly twisted bottles are connected by slots that are located on the bottom of each bottle: for glue, groove in groove. On top of the connection, to make it more reliable, the cut-off middle of another bottle is pulled.

About the bottoms, it is clear how to connect, but how to attach the bottle spouts? To do this, a part with a bottom is cut off from another empty bottle and put on, having previously greased with glue, on a spout with a screwed cap of the prepared bottle. And the operation of gluing the bottom of the bottles to each other is repeated. All joints are wrapped with tape or glued. This is how a log of the required length is assembled.

Platform

The logs are tightly fastened to each other with wire, wrapped with a tape and a platform is obtained, like a catamaran. We need to make two such platforms. One platform will contain 8-10 bottle logs. The platforms are fastened together with plastic tubes and you can already put the bottom of plywood on them.

2 way

This option does not imply the production of longitudinal logs, but are glued together with the side walls of the bottles, forming transverse segments. The width of such a plate depends on the width of the intended boat. Then these transverse plates are connected with each other with the same glue.

The transverse plates are glued together only after the glue in each layer has dried.

3 way

Stick the bottles together "standing", with their spouts up. Above, on the second floor, the sides are being completed.

Of course, not many will dare to make a full-fledged fishing boat, but assembling a small raft on which it is very convenient to get close to hard-to-reach places under the branches of trees is quite realistic and fast. Look at the video for another simple assembly option:

Boat repair with plastic bottles

In addition to building an unusual means of transportation on water, you can use plastic bottles.
To do this, an incision is made in each compartment, so that the bottle crawls through and empty bottles are neatly pushed into the compartments, very tightly.

If you start with the nasal compartment, then push the first row with the throat forward, the next with the bottom forward, the next again with the neck, so you get a more compact and dense filling of the entire cavity.

It is necessary to push as tightly as possible, as soon as the design of the boat allows. Since you cannot connect the bottles with glue or tape inside the side of the bottle, you will have to fasten everything with polyurethane foam.

At the joints of the rows, a puncture is made in the board and each row is foamed with polyurethane foam.

Large slots in the bottle compartments must be sewn up after filling and then sealed with a rubber patch. It is clear that with such a constructive solution, the tightness of the boat will be broken, but now the air will be firmly sealed in the bottles.

Folk omen: If you dreamed about a boat and you are in it, this is to your well-being.

Surely many craftsmen have wondered how you can use the buoyancy of empty plastic bottles to make a small boat or raft for fishing. In fact, it is not so easy to put this idea into practice. Apparently, therefore, there are not so many examples of such creativity, but still they are.

An industrial engineer from Argentina Federico Blanc calculated and built a similar structure in the form of a narrow kayak. The boat can carry two adults with additional cargo.

The boat floats perfectly and is often used for its intended purpose on the Argentine Parana River. The author did not immediately come to this construction. He conducted several experiments with assembling a boat from standard bottles with closed caps. In the end, a perfect design of long cylinders was obtained.

The most important and difficult element of the construction is to glue the oblong cylinders from several large bottles. The two outer bottles are taken with whole necks closed with corks. For the rest, the bottom and neck are cut off from the bottles. The bottles are glued together with the overlap of the walls on top of each other. Of course, this kind of work will take some time and ingenuity. But now the master has made his dream come true. In addition to two people and fishing tackle, the boat had enough space for a small refrigerator, really, a dream, not a vacation.

Another version of a plastic bottle boat made by the owner and staff of a small hotel on Viti Levu Island, Fiji. Here, when designing, they went what is called "head-on". The bottles are simply glued together, to increase buoyancy, the bottom is made of a piece of thick foam.

For tightness, parts of the structure were filled from the inside with waterproof polyurethane foam, I'm really not sure that we have such foam in our stores. On the other hand, I know from my own experience that good foam sticks to any material and you just can't tear it off. Outside, the product is covered with a film, which increases the rigidity of the connection. Despite its rather strange appearance, the boat can keep three adult men afloat.

The business was not limited to one boat; square rafts were also assembled. A raft is certainly easier to make than a boat. It is enough to take some kind of light sheet material, it can be a piece of foam, reinforced on top with a piece of plywood of the same size. Then, under the foam, two or three rows of bottles are glued from below.