How to make a table out of wood yourself. How to make a practical table from ordinary boards without being a "wood craftsman"

The interior of any apartment, house or summer cottage is absolutely impossible to imagine without such an important element as a table.

And although it is not a difficult task to pick up in furniture showroom table of any size, shape, design and design solutions, it is still much more interesting to do it yourself.

Firstly, it is much more economical, and secondly, you will not only enjoy the creation process, but also guaranteed to achieve the desired result - the shape and dimensions that are ideal for your room. Consider the process of making solid wood with your own hands.

First of all, you need to define your goals.

Advice... The choice of wood for a tabletop will depend on what functions your table will perform, how strong it should be, and what characteristics of structure and color should be.

Pine, spruce, alder... The main advantage of these types of wood is their low cost. In addition, they have a uniform structure and are therefore very easy to process. However, their safety margin is not very high.

Oak, beech... These are the options with the most durable wood. If your priority is durability, then oak is the best choice.

It looks very beautiful in section, and the oak countertop will be very heavy. Moreover, the cost of the material is relatively high. Beech is also distinguished by its high strength, it is somewhat cheaper than oak, but practically does not have a relief pattern.

Ash... In structure, it is practically not inferior to oak, although it does not look so luxurious. Its main advantage is the variety of the color palette.

Birch, larch... Also representatives of hardwood. Their processing is somewhat more complicated, but moisture resistance and strength are at the highest level.

Drawings

Many people think that the presence of a drawing when making a table is not at all necessary. But still, in order to avoid inconsistencies of the future finished product with the intended goals, it is better to spend a certain amount of time and protect yourself. Building a drawing is necessary for at least two reasons:

When you decide to make a table, you, of course, think in advance about what functions it will perform and where it will be placed. Dimensions (edit) and the shape of the table is, of course, determined based on the availability of free space. But besides this, you need to take into account such nuances as a comfortable space under the table for the legs, the distance from the chair to the wall, etc. In order to organically fit your table into the interior of the room and ensure its maximum functionality, you need to have a clear idea of its size. And in this matter, you cannot do without a drawing.
In addition, although at first glance the table is not very complex design, the probability of making a mistake in the manufacture of any part, nevertheless, exists. To prevent this, a drawing will come in handy - a visual reflection of the table components on paper with indication of all sizes.

Advice... If you do not have a certain experience in drawing, you can always pick up a ready-made drawing on the Internet. In this case, you will only have to change some parameters, adjusting it to the functions of the table you need and the conditions of the interior.

Tools

In order not to be distracted during work by the constant search for the necessary tools at hand, the entire tool should be prepared and laid out in advance. Approximate list what you might need looks like this:

Manufacturing

Important. Before starting any carpentry work, it is necessary to prepare the wood: carefully grind and treat all surfaces with an antiseptic: solid worktops, boards for the frame, table legs.

Making a frame... The frame is a rectangular base that connects to the table top and serves to secure and stabilize the legs.

We turn the tabletop over and measure a few centimeters horizontally and vertically from the corner of the tabletop inward. Make the same marks on the other three corners of the tabletop. The marks should be at the same distance from the corners;
We draw connecting lines. As a result, you should get a rectangle (or a square, depending on the shape of the table top), inscribed in the center of the table;
Cut off four pieces of wood so that their dimensions exactly coincide with the lines drawn on the underside of the tabletop;
We glue the frame to the table top and install the clamps. To strengthen the structure, in addition to gluing, the frame should be screwed on.

Making legs... To do this, we make four bars of the same length, indicated in the drawing. We glue the legs to the frame and table top so that there is no empty space in the leg-frame and leg-table top connections. We leave it to dry for a while and fix the legs with self-tapping screws at an acute angle to the surface of the board.
After completing the main work, go to processing... All sharp edges of the table top and legs must be sanded by hand. Then we evenly apply varnish to the entire structure. A transparent or colored lacquer will not only protect the table from unwanted external factors such as moisture, but also accentuate the natural pattern of the wood. It will look very impressive if you paint some parts of the table with paint.

Sometimes, in order to increase the durability of your product or to make the table brighter appearance, surface varnished(or paint) again.

In this case, remember that the second coat of varnish or paint can only be applied after the previous coat has completely dried. You should not rush, it is better to wait a few extra hours, but be sure that you do not ruin the almost finished table.

the first time after varnishing and painting, try to avoid moisture and direct sunlight on the surface;
even after the varnish has completely dried, do not leave the table outside in the rain or at low temperatures;
keep the surface clean, promptly treat it with special cleaning agents, polish it periodically.

Photo

You can style the resulting result in the style of the following photos:

Useful video

A great example showing all the steps of the process can be seen in the following video:

Conclusion

Based on the above, we can conclude that to make wooden table with your own hands is not so difficult. Especially if we are leaning towards the option with a ready-made solid wood worktop, because in this case, the "scope of work" is significantly reduced.

In contact with

We will send the material to you by e-mail

Not everyone likes to buy finished products for home use. The soul of some people requires creative and practical self-realization. The editors of the online magazine, the site invites those who wish to find out how to make a table out of wood with their own hands, what is required for this, and whether there are pitfalls in such work.

Beautiful wood product for the kitchen or living room, made with love

Professional carpenters are unlikely to need our step by step recommendations, but for novice amateurs, advice will come in handy. To begin with, consider what products you can make with your own hands from wood.

Of course, the more skills a person has, the more difficult the model he can make. But in order to build a table with your own hands from wood, there are ready-made drawings and photos to help beginners.

How to choose material for self-production of a wooden table for home and summer cottages

What to make dinner table with your own hands? Best of all - wood. The most pliable for the newly-minted master will be a pine tree. Poplar products will look more solemn. For the street, you can take a mahogany.

If you want an option for home and easier, then you should consider laminated chipboard with an optimal thickness of 25-35 mm. On the countertop you can take wooden planks, birch plywood with a thickness of 35 mm. Legs can be made of metal or timber(about 50 mm thick).

In order not to be mistaken with the amount of material, they make a preliminary drawing of the future structure with exactly the specified dimensions.

Advice! Suitable product heights vary between 750-800 mm.

Related article:

DIY furniture made of wood: for a garden, a nursery, a kitchen, a bathhouse, a garden, a gazebo; how to restore pieces of furniture, useful tips and advice from specialists - read our publication.

What tools are needed to make a wooden table with your own hands

It doesn't matter what shape the future table will be: working with wood requires a certain set of tools. You can't do without a jigsaw, and it will be much easier to work with an electric model. To fix all structural elements, either a drill with a multistage drill for holes or confirmations is used. To grind the product to perfection, you need either a special drill bit.

For greater strength of attachment, wood glue is included in the tools.

How to make a wooden table with your own hands - step by step instructions

We have selected four types of structures that you can make on your own, even with a minimum of carpentry skills. We invite you to learn about the stages of making a round and rectangular table, coffee table and models for a garden gazebo.

Making a wooden round table

The easiest thing to do round table top and a link ring of or with dimensions of 1500 × 1500 mm and 1280 × 1280 mm. You will also need two laminated chipboard strips (1110 × 120 × 25 mm). We will make the legs from four wooden blocks measuring 120 × 50 × 750 mm.

How to make a countertop

How to draw a circle perfectly straight? On a sheet of plywood in the center, place your own thumb with a string and a pencil attached to it. The length of the rope from the base to the top should match the radius of the future countertop. Holding your finger in one place, draw a circle around the full length of the rope. It remains to cut it out with a jigsaw.

The circle underframe is cut out in the same way.

Making legs

A round table made of wood or chipboard will look charming if you do everything consistently. You won't have to bother with the legs if there is no excessive originality in the plans. The bars are divided into 4 parts according to the desired size of the table height minus the thickness of the table top. First, one leg is cut off, and the other three are already aligned along it.

All processing with a grinder is carried out immediately.

Advice! You cannot rush to sanding, since the first varnish will reveal all the flaws.

Assembly of the structure and processing of the finished product

The assembly is carried out in stages. First, the strips are aligned groove into groove. Then the crosspiece of the slats is connected with the legs with confirmations, as in the figure below:

If you want to make the structure stronger, before connecting the legs to the table top, their upper base is coated with glue.

Advice! Nails are not used in such work: a self-tapping screw or confirmation can be unscrewed without problems, and the connections will be much stronger.

Making a rectangular wooden kitchen table

The rectangular design is classic and very useful in everyday life: it is convenient to cook on such a table and you can comfortably dine at it.

How to make a countertop

A wooden table top for a table is made either from a whole sheet of plywood, or from individual edged boards processed to perfect smoothness.

Having fastened the boards with screws and glue, they begin to make the frame.

Making wooden legs for the table and frame

At the heart of the quadrangular models is the wireframe. It serves to securely fix the legs, ensuring the stability of the entire structure. Turn the tabletop over, measure 3-4 cm deep on each side and transfer the measurements to the boards. As a result, you will need two boards of shorter length and two more.

The frame is made of four elements: according to an approximate ratio, these are two boards of X cm and two of 2X cm. They are connected to each other with an overlap alternately, building a rectangle. In order not to violate the angle of 90 °, any board is used while working with a screwdriver: they press the structure with it while tightening the screws.

As soon as the frame box is ready, they begin to make the legs. You can take ready-made balusters for the table, buy metal supports, or cut them out of bars according to the desired length according to the drawing.

Both the frame and the legs must be carefully polished!

Product installation and final finishing

The frame is screwed to the tabletop with glue or self-tapping screws. Then the product is turned over and the legs are attached.

Important! Better to make the screw holes well in advance. This eliminates the possibility of splitting the tree.

Why not use nails and a hammer? Not everyone knows the skills of working with a hammer - here it is dangerous not only to knock on the finger. Excessive zeal can easily damage wood by splitting it. Confirmates and self-tapping screws hold the tree much stronger.

As soon as the leg is fixed, the angle is immediately checked: there should be no deviation from 90 °. The operation is repeated with other legs. It is possible to attach the legs directly through the countertop, but this will affect the aesthetic component of the product.

Related article:

: Photo best ideas... What can be made from pallets for an apartment, office and summer cottage; rules for the selection and handling of pallets; master classes on making a table, sofa, bench, armchair and rack - read our publication.

DIY wood coffee table

Not only a beautiful element of the interior, but also a useful one. No need to look for where to put a book, gadget, glasses, TV remote control in a prominent place. Such necessary constructions are made from different materials: metal, glass, plastic, laminated chipboard, wood. But let's leave the other materials alone and concentrate on working with wood.

Choice wooden countertops for the table depends on the expectations of the owner of the product. Someone wants something massive, while others prefer light options. Let's dwell on a simple solution.

We buy five boards 30 × 150 mm and process them to perfect smoothness. We immediately saw off the desired length on the countertop: you should get 6 identical canvases. We take four bars on the legs, 6 sheets of shorter length on the lower tabletop, 4 narrow slats for the frame.

Illustration	Description of action
	To brush wood, use a grinder with a brass brush head. The procedure will expose the structure of the wood, giving the product a special flavor.
	We go back and forth along each board from the side that will be the front.
	We process the tree with fire. The flame is gradually moved from place to place: the board will acquire a beautiful darkish tint. The procedure will permanently destroy unnecessary soft wood fibers. We actively wipe the entire surface with a felt boot or a piece of felt.

We begin the process of assembling a small table with our own hands from wood.

The lower and upper countertops are placed on the work surface with the wrong side facing you. Boards are stacked tightly to each other, gluing them together. As soon as the boards grip, the slats are attached to the top tabletop. They will serve as a frame and fastening element. They can be glued or screwed on with self-tapping screws. A self-tapping screw is screwed in the center of the rail into each of the boards.
The legs are screwed to both the tabletop and the slats. You can use the furniture corners.

Video: the process of making a coffee table from wood

Making a wooden table with benches in a gazebo with your own hands

It's time to set aside time and build a wooden garden table.

It is best to take boards standard sizes... Studs (suitable with a length of 16 cm), washers (24 pieces) are purchased at a hardware store. For a garden gazebo, long nails (8 cm) will do.

To paint a product or simply to varnish it is already a matter of taste.

An integral part of any home is a table. Despite the fact that the variety of forms and materials of execution of this piece of furniture can amaze even the most demanding and sophisticated buyers, many amateur furniture makers try to make a table with their own hands. There is nothing difficult in this, because the design of the table is not much more complicated than an ordinary stool. Armed with a saw, drill, hammer and other tools, you will be able to assemble such a product in literally half a day, and it will look no worse than the purchased one. One of the main advantages of making this furniture with your own hands is the possibility of creative self-expression. In addition, a do-it-yourself table can become the centerpiece of any interior.

It's no secret that the main function of the table is to organize a place for dining and receiving guests. In addition, it often serves as a place for family pastime, during which you can enjoy various entertainment: playing cards, monopoly, bingo, dominoes, etc. In addition to significant savings and demonstration of carpentry skills to others, making a table with your own hands provides a person with an excellent opportunity to create a unique little thing that is ideal in all respects: shape, size, material and reliability. Following the instructions and recommendations of professionals, you will be convinced from your own experience that this furniture product is quite capable of making yourself at home.

Today, various building materials are used for the production of tables: metal, glass, plastic, stone, but often furniture is made from such high-quality materials as wood. To create a wooden table with your own hands, you can use soft (spruce, pine, cedar, fir), hard (birch, walnut, oak, maple, ash) or very hard (dogwood, yew) wood species with good resistance to decay and mechanical influences.

Walnut has the most valuable qualities for furniture - it combines high hardness and excellent toughness. If you are new to the carpentry craft, it is recommended to give preference to furniture made from pine, birch and oak. Deciding to make a pine original table do it yourself, you can use cheap knotty boards, but they should be free of knots, cracks, spots and traces of rot.

Before proceeding with the analysis of specific points and recommendations that will help you make a table with your own hands, it is important to decide on the design of the desired product. Due to the excellent combination of naturalness and environmental friendliness of wood with a summer cottage concept, a homemade wooden table will be an excellent option for garden furniture. A small do-it-yourself table made of wood, as if deliberately aged, will also fit well into the design of a city apartment, made in the Scandinavian or Provence style. It is noteworthy that in terms of the complexity of the work, this piece of furniture for most craftsmen is almost like a homemade wood product, since homemade table very easy to assemble. This fascinating process resembles a constructor assembly.

A do-it-yourself kitchen table is both an opportunity to save money and a way to provide the kitchen with unique furniture that fits perfectly into the available space. However, it is important to correctly determine the dimensions and shape of the future structure.

How to make a wooden dining table

A solid wood table is beautiful, natural and, as a rule, expensive. But buying such a table is not necessary, because you can make it yourself with no less quality and for much less money.

So, to make a dining table with your own hands, you will need:

4 things. legs-balusters for the table, 73 cm high and not too thin;
For the table top: 4 dry edged wooden boards 1 m long (for a table 60 cm wide);

For the frame: 2 boards 80 cm long and 2 boards 40 cm long.

Prepare tools: a plane, a grinder or grinder, jigsaw for cutting boards, circular saw, drill (with 8 mm drill), screwdriver, sandpaper, self-tapping screws (30 mm), wood glue, dowels, clamps (desirable). And of course a pencil, tape measure, gloves and goggles come in handy.

For finishing the table will need varnish, stain or paint along with a primer. First, let's make the countertop. To do this, you need to fit all 4 boards as accurately as possible to the same length - 100 cm. If your boards were not sawn on a sawmill, then they must also be trimmed in width and thickness. Then they need to be carefully sanded with a plane. The better you sand the wood, the smoother the countertop will be. Finish the edges well so that the boards fit as tightly as possible to each other.

We will not connect the boards with self-tapping screws and nails, but with glue and dowels (chopiks). To do this, make the same marks on the edges of all boards with a step of 10-15 cm and drill holes for the dowels with an 8 mm drill. Then sand the edges and apply wood glue to them and into the holes made. Now we drive the chopiki processed with the same glue into the holes and, in turn, connect all 4 bars. Remove excess glue on the surface with sandpaper and grind it, as well as all edges with a plane. At this stage, you can walk on the countertop with a metal sponge to give the wood texture.

So, the table top is ready. Now you need to fasten the legs and make a base for it.

To do this, you need to evenly fasten the balusters with short transverse boards with glue and screws. The glue dries for at least 12 hours.

We attach the legs to the long crossbars and drill holes in them in order to later install the tabletop.

After the glue in the frame dries up, you can start installing the countertop on it (frame).

If you want to make the table longer and wider, then you need to strengthen the table with two additional cross bars, as shown in the photo.

So, the table is almost ready, it remains only to process it with varnish or stain, or paint it, having previously primed it.

What color to paint the table? Build on personal preference and the color of the rest of the furniture. Below is the most versatile option - the table top and legs are stained.

You can watch the main mistakes of wood staining with your own hands in this video.

If you like gloss, then the surface of the table can be covered with a stain, and on top - with varnish (example in the photo below), or simply varnished.

You can paint the legs in White color, and cover the countertop with stain to get the design as in the next photo.

How to make a kitchen table from chipboard

A do-it-yourself kitchen table made of laminated chipboard is a practical and budget solution. Such countertops are covered with decorative plastic that is resistant to abrasion. In a typical version, the dimensions of the tabletop canvas are 3000x600x36 (26) mm, but today it will not be difficult to purchase a chipboard sheet, sawn to the required dimensions, or agree in a furniture workshop to sell a suitable trim.

You will also need:

Connecting and end strips;
End edges;
Screeds.

Even if you purchase a worktop of suitable dimensions, you will need to additionally process the ends - this will make the result more attractive, as well as protect the base from moisture. For these purposes, you can use a special furniture edging based on polyvinyl chloride or glue an edging tape. The piping option is considered more practical for the dining table and suitable for DIYers.

For kitchen table you will also need the appropriate supports - you can buy the legs separately or give preference to the finished base. It all depends on what option your drawings provide. The most common option is round legs D = 60 mm and a height of 71 cm. They can be collapsible, adjustable in height, and also differ in design - matte, painted, shiny.

In our case, these will be chrome-plated shiny legs-rods with a diameter of 60 mm, as well as a table top made of white chipboard with a thickness of 36 mm and a white plastic mortise T-shaped edging with girths is matched to it.

So, how to make a dining table with a chipboard top:

The markings are applied to the material according to the drawing. At the corners, the curvatures must have a radius of 60 mm.

The table top is shaped with a jigsaw.

A saw with reversible teeth should be used, otherwise the plastic coating may chip. First, the corner of the chipboard is cut off with a jigsaw with a margin of 2 mm, and then it is finally rounded off with a grinder.

A groove is milled for the furniture edge.

The edging is stuffed. Before this, the ends of the product must be covered silicone sealant... The sealant is applied both to the edging and to the top edge of the countertop. A rubber mallet is used to stuff the edging. Then the excess sealant is removed.

Legs are attached. To do this, markings with a pencil are made on the back of the tabletop. In most cases, the legs are placed 100 mm from the edge.

For fastening the holders, self-tapping screws with a countersunk head about 20 mm long are used. After that, the legs are put on the holders and fixed with a hex wrench - that's all, your new table ready.

How to correctly determine the dimensions

According to the principles described above, tables can be made larger or smaller in length and width. How to choose the best size for your family?

If we are talking about a standard kitchen with dimensions from 6 to 8 squares, then the drawings will show a typical construction with a height of 750 mm and a perimeter of 800 * 500 ... 1200 * 600 mm.

A do-it-yourself dining table should be designed for a certain number of people. Usually it corresponds to the number of tenants - 3-9, but a couple of free places are still added for guests. For large companies good decision will become.

Calculations are carried out as follows: the number of persons is multiplied by 60 ("working" perimeter per person). As for the width of the countertop, here we follow the recommendations of experts - its optimal values are from 800 to 1100 mm. Narrow tables difficult to serve, and wide ones are uncomfortable for those who are seated.

If you decide to make the kitchen table with your own hands oval (round), then you will have to calculate the circumference - diameter * 3.14.

Form selection rules

The shape of the kitchen table plays a significant role in the perception of space. Universal design - rectangle or square with right angles. It is balanced and can be installed close to a wall or in the center of a room, saving space.

Oval models are also quite comfortable and beautiful, but they do not differ in their large capacity - the largest product will fit no more than 8 people. In addition, they require large areas - more than 8 sq. meters, because you can't put them against the wall.

It can also be called a versatile and traditional option, suitable for both very and large kitchens. But it has less capacity than a rectangular table.

The best option is a rectangular table with rounded corners. We have already described how to make just such a chipboard table with our own hands.

Furniture care rules

After the dining table is made, you will need to take care of the long operational period of the product.

So, furniture made of wood, polished and lacquered, needs careful maintenance, since it can easily be scratched. In addition, traces of contact with hot are possible here. As a basic wood care, a universal polishing compound is selected.

If we are talking about a countertop made of MDF or chipboard with a plastic coating, then caring for it is not difficult and consists in regular washing with detergents.

Do not forget that kitchen furniture need to move away from heating appliances and from the walls bordering the street. Harmful for wooden furniture there will be direct sunlight.

The arrangement of a summer residence is a constant process. Either you build something, then you improve it. Moreover, furniture is constantly required and tables are most in demand in the country. And put in the garden, and near the house, and also in. We will tell you how to make a table for a summer residence with your own hands in this article using the example of ready-made projects.

Homemade table from pallet boards

Disassembled pallets served as the material for this table. Naturally, new boards can be used. There is only one condition - they must be dry. You can buy dry ones (it costs more) or buy ordinary ones, put them somewhere in ventilated piles and keep it that way for at least 4 months, or better - six months. In general, any furniture, including, is made of dry wood.

We assemble the table for the street - put it in the gazebo, therefore we will not glue the boards of the countertop, but we will fasten them from below, using slats. It's very simple country table and very cheap.

Having disassembled the pallets, we get boards with an individual color and pattern. Having conjured a little, having shifted them several dozen times in different manners, we achieve the required result. It turns out quite a nice tabletop.

We take the side parts of the pallet. We use them for the table frame. We grind them first with coarse sandpaper, then we bring them to the required smoothness (grain 120 and 220).

We take the strips that have remained unused, with their help we fasten the tabletop. We place them in the place where the joints of the boards are. For fastening each board with a joint, we use two self-tapping screws, for a solid one - one.

From the processed sidewalls and two boards (also sanded) we assemble the table frame. We fasten its parts with self-tapping screws to the end (two for each joint). The frame can be glued or also "put" on self-tapping screws. Only their length is large. For each, we pre-drill holes with a drill, the diameter of which is slightly less than the diameter of the screws.

Turn the assembled tabletop over and grind it. The procedure is the same - first with coarse-grained sandpaper, then with fine grain.

Next is the installation of the legs. We select four boards of the same size, check their length, and adjust if necessary. Then - sanding again. This is easier than sanding the already bolted legs. We screw the sanded boards to the frame. These will be the legs. For each one there are two self-tapping screws fixed in a diagonal (look at the photo). For greater stability, we install jumpers at the bottom. From the floor to the jumpers, you can leave about 10 cm. We connect everything with self-tapping screws so that the boards do not crack, we pre-drill the holes.

After removing the dust, we again varnish. In theory, the varnish should lie flat, but it depends on the wood, so another sanding / painting cycle may be needed. As a result, we get such a homemade country table.

If you don't like motley planks and old nail marks, you can use the same design to make them planks. This table can be rectangular, maybe square. All sizes are arbitrary - see available space.

Country table from the remains of boards

This table for giving with your own hands is assembled from the remains of boards of different breeds and sizes. Pine boards with a thickness of 25 mm and a width of 50 mm were used for the tabletop frame, the rest of 15 * 50 mm on the legs. We make the frame according to the dimensions you need. This table will stand on the veranda, and it has a small width. So we will make it not wide - 60 cm, and the length 140 cm. The height of the legs is 80 cm (everyone in the family is tall).

Immediately cut off two long boards of 140 cm each.To make the width of the table top 60 cm, we subtract twice the thickness of the board used - this is 5 cm. Short bars should be 60 cm - 5 cm = 55 cm.Fold the frame, keeping an eye on the right angles, and twist it with self-tapping screws. We check if the bars were folded correctly - we measure the diagonals, they should be the same.

We cut off four boards of 80 cm each, fasten them from the inside to the assembled frame. You can have 4 self-tapping screws for each leg.

We attach the crossbars approximately in the middle of the height of the legs. This is the frame for the shelf. The shelf can be used for its intended purpose, and it also increases the rigidity of the structure. We fix it strictly at right angles, checking with a large square.

We put the frame on the floor, check if it is wobbling or not. If everything is done correctly, it should be rigid. Next, we take sandpaper or a sander and grind.

Let's start assembling the countertop. From finishing works planks of different types of wood remained, some were painted with wood stain. We alternate boards of different colors.

We fasten the boards of the tabletop with finishing nails, carefully finishing them off with a finishing tool. It can be fixed on the shelf with ordinary nails or self-tapping screws. Then we level with a grinder. The last stage is painting. Very unlucky with the choice of varnish. We bought it too dark, didn't like the look. We'll have to sand it again and paint it in a different color.

Wooden table with glued top

This design is different L-shaped legs... They are assembled from boards of the same thickness. In this case, 20 mm. In order for them to hold well, 5 self-tapping screws are needed. Pre-drill holes with a drill with a diameter of 1-2 mm less than the diameter of the screws. Then with a drill larger diameter we drill recesses for the caps. The diameter can be matched to furniture plugs of a suitable color or made from a wooden rod. Another option is to use wood putty, to which add wood dust that remains after sanding. After drying and sanding, the marks will be difficult to find.

When assembling the legs, make sure that the angle is exactly 90 °. You can choose a bar as a pattern. First, we coat the joint of the two parts of the leg with wood glue, then we install the screws in the following sequence: first the two extreme ones, then the middle one, and only then the other two. After the glue has dried, the legs are sanded, varnished and dried.

It's time to make the countertop. We collect it from boards of the same thickness. We type in the size you need. Fragments of different widths can be used. It is only important that everything looks organic, and the sidewalls of the boards are even and docked without gaps.

We coat the sides of the boards selected for the tabletop with glue, lay them on a flat surface (some kind of table) and tighten them with clamps. In this case, they cost one, but preferably at least three. We tighten it so that there are no cracks in the resulting shield. We leave for a day. Having removed the clamps, we get an almost finished tabletop. It still needs to be ripped off - to align the edges, and then sanded. You can trim with a jigsaw or a conventional hand saw. Using a grinder is difficult to get a straight line, but you can try. After sanding, we get a beautiful tabletop.

Using the same technique, you can make an oval or round tabletop. It will only be necessary to draw the appropriate line and end the glued boards along it.

To make the table look more attractive, let's make a frame. We take a thin strip, process it with sandpaper and fasten it around the perimeter of the tabletop. You can also use finishing nails. Only the planks are also pre-coated with wood glue, and then with nails.

After the glue dries, we process the joint again with sandpaper.

Now you can attach the table legs. We assemble a table frame from four boards (there is no photo, but you can do it as in the previous paragraph). We attach it to the back of the tabletop with glue, then install furniture confirmations through the tabletop. A preliminary hole is drilled for confirms with an expansion under the head. The holes for the fasteners are masked in the same way as on the legs.

We attach the legs to the fixed frame. We put them inside the frame. You can attach it with ordinary self-tapping screws. That's it, we made a table for a summer residence with our own hands.

How to make a garden table from wood with benches

For this table, boards of 38 * 89 mm were used (dismantled themselves), but you can take standard sizes. The difference in millimeters will not greatly affect the results. In the photo below you can see what should turn out.

To connect the parts, studs 16 cm long with washers and nuts (24 pieces) were used. All other connections are made with nails 80 mm long.

The parts are installed in place, a through hole is drilled with a drill. A hairpin is installed in it, washers are put on on both sides and nuts are tightened. Everything is pulling up wrench... Why is this option convenient? For the winter, it can be disassembled and taken to a shed or garage.

Making seats

According to the drawing, we cut the boards of the required size. Everything is needed in double quantity - for two seats. We grind the boards, pay special attention to the ends.

The short sections, which we use to fasten the three seat boards along the edges, are cut off at an angle of 45 °. First, we assemble the structure that is attached to the bottom of the seat. We take a board about 160 cm long, at the end to it we attach two short boards sawn at an angle. You need to attach it so that this board is in the middle.

Then we attach the legs to the resulting structure (you can use nails). Then we add the boards cut at an angle and tighten everything with studs and bolts.

We attach the seat boards to the resulting structure. Since this is a table for the street, you do not need to knock them close. Leave a gap of at least 5 mm between two adjacent ones. We nail it to the supports (which have been cut down), two for each board.

We fasten the finished seats with four boards 160 cm long. We fasten each leg with studs (if you walk, you can put two studs by placing them in a diagonal or one above the other).

Putting together a table

The table is assembled in a different way. Please note that for the countertop, the transverse boards are sawn at the edges at 52 °. We attach them at such a distance that the legs enter. Each board has 2 nails. You can finish, with small hats, or you can hammer in deep, and then mask the holes with putty.

Now we need to assemble the cross-legs. We take two boards, cross them so that the distance between their ends is 64.5 cm. We outline the place of intersection with a pencil. At this point, you will need to take out the wood half the thickness of the board.

We make the same notch on the second board. If you add them, they turn out to be in the same plane. We connect with four nails.

We make the second leg for the table in the same way. We are not assembling the table yet.

Installing the table

Now you need to fix the legs to the structure on which the benches are installed. We put them at an equal distance from the benches, fasten them with hairpins.

Now we install the tabletop. We also fasten it with pins. The last stage is painting. Here everyone does as he pleases.

Variations on a theme

According to this drawing, you can make separate benches and a table for a summer residence, a garden. The design is reliable and simple to perform.

Diy table for giving: drawings

Did you like the article? Share it

Print article