How to hide heating pipes: we disassemble the types of boxes and decorative overlays. How to hide heating pipes in a private house and apartment - methods of disguise and decoration How to close heating pipes in a house

Speaker communications are the real enemy of aesthetics. Many do not know how to beautifully decorate and beat the heating pipe. But you can always hide batteries in a wall or box, using grates so that heat transfer does not suffer. In addition, a good option is masking with decor.

Pipes, risers and radiators can be masked in several ways. A fairly popular option is to hide communications in the wall or in the field. At the same time, it is important to replace old pipes with new ones in the apartment before such work. It is better to choose plastic communications. Otherwise, leaks will occur, which are quite expensive to fix.

The sequence of installing pipes in the wall:

  1. First, a communication scheme is created. In this case, the cross-section of the pipes, thermal insulation and the thickness of the wall layer, which must be repaired, are taken into account.
  2. Next, you need to make a hole in the wall. This is a special recess in which communications will be placed. Provide places for elbows and tees.
  3. Then, insulation is put on the pipe and mounted in the provided niche. The communications should be well secured, ensuring a secure fit.
  4. The pipes are fastened using brackets. For this, holes are made in the wall with dowels. They will fix the device.
  5. Next, you should check the performance of the pipes. Only after that the niche is closed.

The second method involves sealing pipes in the floor. First, they think over the styling scheme. A groove is made in the floor. The top of the pipe should be slightly below floor level. Then the pipes are insulated, checked and laid. Communications are closed concrete mortar... For normal water circulation, a pump is provided.

The concrete screed must be of sufficient thickness to prevent the floor from collapsing during use.

But hiding the pipes in this way, you should be prepared that in case of a leak, you will have to completely disassemble the floor or wall. That is why it is important to keep all risks to a minimum. One-piece pipes or with a minimum number of joints should be selected. This option can be called a warm floor.

How to hide heating pipes in an apartment using a box

The box is considered a good option when the heating system is already installed. You can sheathe the casing with plastic, drywall, wood. Before work, you should make sure the integrity of the communications.

Required tools for installation:

  • Metal profile;
  • Self-tapping screws with dowels;
  • Material for the box;
  • Screwdriver;
  • Drill;
  • Scissors for metal.

First you need to make the frame of the box. The material of manufacture is fixed using self-tapping screws. First, the markup of the location of the communications is carried out. The dimensions of the pipes, the thickness of the material and the spacing between the walls of the box and communications are taken into account.

Do not install pipes close to the box. It is optimal to leave a distance of 3 cm.

Then the corner profiles are mounted. If the spacing between the posts exceeds 25 cm, then additional jumpers should be made. If the height of the racks is more than 150 cm, then horizontal jumpers are mounted. When the frame is ready, they begin to design it. Bevels are removed from drywall before installation. But if in the future tiling is envisaged, then this process can be omitted.

They begin to install the walls of the box from the side parts and move towards the central ones. After installing the walls, the box must be decorated decoratively. To do this, use tiles, wallpaper, paint.

If you want to hide the batteries, you can build a false wall. The execution technology is similar to the box. First, the frame is made, then the walls are sheathed. A significant disadvantage of this decoration method is the reduction in the area of ​​the room. If you don't want to bother with installing these elements, then you can purchase a ready-made box in a hardware store.

How to hide heating pipes in a private house by decorating

Hiding pipes in a wall or box significantly reduces heat transfer heating elements... Sometimes these activities are contraindicated. That is why pipe decor is widely used to close communications.

In this version, you can safely listen to your imagination. The main thing is that the original effect fits harmoniously into the interior of the room. You can just paint the pipes under color range premises.

Requirements for paints:

  • Mechanical durability;
  • Thermal strength;
  • Non-toxic.

Jute or hemp rope can be used as a decor. But this will reduce the heat transfer of the pipes. You can also try chopped bamboo. You can additionally decorate with branches and leaves, creating a branch. Highly placed pipes can be closed with curtains.

For staining communications, water-dispersion, acrylic or alkyd enamel is used.

It is easier to hide pipes at the stage of laying communications. Then it becomes possible to mount the system as discreetly as possible. Also, in this case, it becomes possible to make a warm floor.

Options for closing heating pipes

You can use decorative pipe covers. This will help reduce equipment costs. heating system... Sometimes this is a fairly economical option.

Functions of decorative overlays:

  • Hiding batteries and pipes in whole or in part;
  • Protective function against hot radiators;
  • Fitting the box in the design of the room;
  • Simplifies maintenance, as dust does not settle on the battery;
  • Some padding options help distribute heat evenly.

But when choosing a decoration, it is important to consider not only beauty, but also practicality. It is necessary that the material does not reduce heat transfer and does not emit toxic substances during heating. Plastic, for example, must withstand high temperatures for a long time. It is also important that the material does not change color or shape during operation.

The decoration should not interfere with the heat dissipation of the radiator.

The decorative box must meet a number of parameters when used. The cover should not take up much space; you should choose the most compact options. The fastening of the structure must be sufficiently strong, but at the same time it is necessary to provide for the possibility of access to the batteries. It is also important that the box is not too heavy.

Ways to decorate a heating pipe in a room (video)

In an apartment or a private house, pipes can always be removed from the eyes, even if the communications have already been laid. You can drown risers and radiators under the ceiling, in the wall or in the field. You can sew up communications in a special box. But you can simply decorate the pipes by wrapping a beautiful ribbon or rope around them.

Examples of how to decorate a heating pipe in a room (photo)

Modern building technologies allow us to make our homes more and more perfect both in terms of comfort and in terms of aesthetics. Heating, of course, increases the comfort of living in winter (and not only ...), but the heating pipes that we have to lay in all inhabited premises are clearly not a decoration. Of course, modern plastic products look more presentable than steel ones, but they clearly fall short of a decorative element. Well, at least the quality of many materials allows you to hide them in the wall or floor, without fear of the need for an early repair.

How to close heating pipes in a wall or floor

At the stage of overhaul or building a room, you can hide the heating pipes in the wall or floor. It is impossible to say unequivocally whether this is a good option or not.

Firstly, if you are going to hide communications in an apartment of a multi-storey building, and not in a private household, you may have problems. Alteration of utilities, according to the law, requires a permit. Not only will you need to order a rework project, you will need to agree on it later with the operating organization. And the chance to get permission tends to zero. Even if you have obtained a permit, or are modernizing / equipping your home, there are pros and cons to this solution.

pros: firstly, they do not spoil appearance premises, and secondly, their heat transfer increases since the thermal conductivity building materials better than the thermal conductivity of air. That is, it turns out that by hiding the pipes in the walls or floor, you increase the heating efficiency. But this is provided that you will not protect them with a heat insulator, but such a solution also has negative aspects (described below). To all this, such a solution has a sufficiently large minus: in the event of a leak or the need for replacement / repair / revision, you will have to destroy the wall with all the ensuing consequences. We are not talking about the quick elimination of the breakdown at all, and if you live in a high-rise building, then you are guaranteed to flood your neighbors ... So it is better to hide the heating pipes in the walls in your house: at least the neighbors will not have to pay for repairs.

However, more and more people are doing this. And all because modern materials have more than a solid period of trouble-free operation, some of which are tens of years. For example, some types have a lifespan of 50 years. Almost the same number of high-quality metal-plastic products serve. Copper has the longest service life - up to 100 years - although even here it has its drawbacks: too high thermal conductivity of copper can lead to the fact that most of the heat will reach the walls, and nothing will reach the radiators, and copper is very demanding to the conditions. and if they are not observed, they can collapse in a matter of months. A pipeline made of high-quality similar materials may well lie in the wall for more than a dozen years and at the same time there will be no problems for all the time. It is only important to choose high-quality material and lay it correctly.

Rules to consider when designing heating systems

The thoughtfulness of the system is no less important than the choice of material. There are a few rules to know:


If you do not have enough experience in this matter, try to consult with a competent specialist who will be able to foresee all (or most) possible situations and determine the way to solve them. So it is worth thinking carefully before making such a decision, as well as planning everything carefully.

We hide the pipes in the wall. Work order

The decision has been made, the system has been designed, How can you still hide the heating in the wall or floor.


One important detail: you must have a detailed plan showing the location of the pipes in the walls. This is necessary so that during the next repair or some kind of work, you do not accidentally damage the heating (drill a hole for the dowel and get into the main line ... that will be your worries).

Similarly, they hide the walls in the floor screed. There are practically no differences. Unless for convenience, everyone strives to lay in one wide strobe, from which they are then bred in the right direction. If you have not done the screed yet, then lay the pipes (in thermal insulation), and then make the screed. And again, save the communication plan.

It will be a little easier to lay communications under the plank floor - there is usually enough space to hide the pipe in the heat insulator. The only thing, probably, is still to be laid so that by removing one or two boards if necessary, you can get maximum access to the highways located under the floor (just in case).

Hide heating pipes under drywall

This option is suitable for both rooms and premises. household use: bathroom and kitchen. The advantages and disadvantages are almost the same as in the previous method. The only difference is that you do not need any approval and project: there is no transfer of engineering networks. So there can be no claims on the part of the law.

The advantage of this solution is that you can easily hide the heating pipes in panel house, since it is almost impossible to groove there, and there is nothing: the thickness of the slabs is very small (except that it is unrealistic to obtain permission). But getting to communications is almost as difficult. Unless you can make one of the panels with hinges and a latch. To be able, if necessary, to easily get to the valves or pipes. Fortunately, today there is a variety of fittings that will allow you to realize your idea. If you are going to "mask" the heating in the bathroom or toilet, you can provide a revision hatch located in key places.

The order of collecting the box in any case will be the same: first, collect from metal profiles frame of the desired shape, then attach to it Decoration Materials: drywall, MDF panels, plastic panels, plywood or OSB boards, finally. Some of these materials require finishing some don't. But they are already moving on Finishing work... Such a box can look like a cabinet, a shelf.

One of the options for the frame can be a false wall. Neither the order of work, nor the principles are different. All the difference in volumes: both the frame is larger, and the surface that requires plastering. But the order is the same: first, a crate is attached to the wall. If the depth of the profiles is enough to hide the pipes in the thermal insulation, this is good. If not, you will have to mount another crate at some distance. Alternatively, to increase the space, you can first attach a counter-batten, and then perpendicular to it, to which drywall or other panel material is already attached.

Often these boxes are used in the bathroom or toilet room, and revet everything with tiles, which are "planted" on glue. The seams are filled with standard grout, the corners can be closed with plastic corners.

The photo below shows an option of how you can beautifully hide the heating pipes with a false panel along the wall.

One way is a false wall. Looks attractive

How to hide heating pipes in the bathroom

The bathroom differs from all other rooms in high humidity. This will be the feature: you need to use materials that are not afraid of moisture. The solutions here are, in principle, the same: hide in the wall or make a box for them. Naturally, pipes must be laid in the wall before laying the tiles, but the box can be built after.

Hiding the heating pipes under the plinth is one of the ways to get by with "little blood"

The principle of construction is no different: you make a frame, and then sheathe it. But the difference will be in the materials. You need to use galvanized profiles, and drywall - moisture resistant. Even taking into account the fact that you will stick the tiles on top. The tile will most likely have to be cut to fit the frame format (or the frame size should be made taking into account the tile size), and the corners and cuts can be closed with special corners to match the tile, contrasting color, white, etc. - the choice depends on your desire and bathroom design.

One of the panels of the box can be made removable. It can be held on magnets, corners, stops. This will not violate the aesthetics and will provide access to communications.

There is an option that, if appropriate, will allow you to get away with "little blood": there are special plastic baseboards-boxes. So if the heating pipes in a bathroom or another room run along the wall above the floor itself, you can hide them in such a baseboard.

If none of these methods suits you for some reason, you can try them.

There are pipelines in every apartment. Modern interior assumes the design of the room with taste, so that everything is neat and stylish. Therefore, the question of how to close the heating pipes worries many owners. Today there are a number of ways that can be used to solve the problem of an unaesthetic type of heating structures. The article will discuss the most effective of them.

There is a large selection of heating systems on the market. To determine which pipes to use for heating a private house or apartment, you need to consider physical properties products, performance characteristics, installation and application conditions. There are pipes that look aesthetically pleasing and do not spoil the interior of the room, but are of low quality and low technical parameters. And there are reliable and durable options, but not very attractive in appearance. For creating stylish design, such pipes have to be hidden.

Deciding how to hide heating pipes in a private house is best at the construction stage. Then you can think over everything well and equip the system in such a way that the highways are not visible at all. Of course, there are options that can be applied after the completion of the construction of the house and renovation works... But it is still better to pay attention to this issue directly at the design stage of the structure.

The most commonly used options for hiding heating pipes in an apartment, private sector, are:

  • closing of the laid highways with decorative screens;
  • masking pipes with a false wall made of gypsum plasterboard or a box;
  • hiding under a raised floor;
  • performing the wiring of the heating system for false ceiling;
  • brickwork of risers into the wall;
  • use of decorative elements.

Pros and cons of methods for hiding heating pipes

To answer the question, how to close the heating pipes is best, you need to know that each of the options has positive and negative sides. It is necessary to choose one of the methods not only on the basis of decorative qualities, but also taking into account specifications highways, laying conditions and other local factors. It is worth dwelling in more detail on each of the options.

Decorative screens

Suitable for all types of pipes. Quite affordable way to hide the pipeline. If the risers are made of metal and lag behind the wall at a great distance, then the installation of screens is the best option, how to close the heating pipes in a private house or apartment. The choice of decorative screens is wide and presented different forms and colors. You can read more about battery grilles. The advantages of this method include: quick and easy installation, the heat transfer of the riser is not disturbed.

Plasterboard and laminate structures

A decorative box to hide the pipeline can be made of laminate, drywall, polyvinyl chloride, MDF. Sometimes they use and parquet boards on a rack frame. This option, how to close the heating pipes in the room with plasterboard, is the most popular. The use of this material makes it possible to create structures of any configuration. It is very simple to decorate a plasterboard structure: you can paste the wallpaper or paint it to match the walls of the room. Can be finished with tiles.

Many people choose such a method as to hide the heating pipes in a new building with a laminate, having built a box out of it. In this case, the structure turns out to be decorated like the floor. If, in addition to heating pipes, other communications pass in the house, it is best to hide them with the help of false walls from gypsum plasterboards.

The considered method has several disadvantages, for example:

But, formed as a result of the construction of a false wall, the niche can be used profitably. For example, laying a layer of insulation can be a good way to improve light and sound insulation. You can use such a place for a night light or place a stereo system. Using the niche with benefit, false wall equipment will be a fully justified option for hiding pipes for heating.

Concealment of highways in the wall, floor

A method such as hiding heating pipes in a floor screed or in a wall is not suitable for all highways.

For example, this method cannot be used for pipelines made of black steel, metal-plastic with compression fittings made of polypropylene. But for stainless lines and copper pipes, cross-linked polyethylene and metal-plastic on press connections, the option will be ideal. But you must first think carefully about all the subtleties of the layout of the wiring.

They have heating pipes in the wall, pros and cons that you need to know before choosing this method of masking the line. The main advantage of the method is that the design of the room will not be disturbed and overloaded with additional details. However, there are also disadvantages. For example, the complexity of the installation. If the pipe leaks, you will have to demolish the wall to repair it.

Hiding pipes in the ceiling

Very often, the highways are located in the upper zone of the room and are closed with false ceilings. For a private house, this is a very practical option. But also quite expensive. It is important that the joints are of high quality and reliable. Otherwise, if the pipe breaks through, water can flood electrical appliances and residents of the house. Before hiding pipes behind a wall, in the floor or under the ceiling, you need to think carefully about everything. To strengthen the thread, tow or flax was previously used.

Today, new, more effective materials have appeared. For example, reel for sanitary-type heating pipes. This is a great way to seal hot or cold water pipes. It must also be remembered that when the pipeline is heated or cooled, its length may change slightly. To reduce fluctuations in the length of the line, special devices are used - compensators for heating pipelines at home. They compensate for changes in length, which makes it possible to increase the service life of heating structures.

Applying decor elements

Decorative rosettes for heating pipes are an excellent option for hiding pipes.

The method is simple. The gap between the floor and the pipe is filled with an elastic sealant that can withstand high temperatures. And then they decorate it with a decorative rosette. Such elements are made of wood or plastic. Plastic sockets are available in a wide variety of shades. Wooden ones can be painted in any color, varnished or stained.

Thus, today there are many ways to hide heating pipes in a private house. It is advisable to close the highways at the stage of construction. But even after construction, pipes can be decorated. Each of the methods has its own positive sides and disadvantages. And which one to give preference to depends on the type of pipeline, operating conditions and the chosen design of the room.


Unhidden pipes can ruin the design of every room. It is not an easy task to hide the heating system without disturbing its functionality. This applies equally to any apartments and individual houses.

How to hide heating pipes

There is more than one way to hide heating pipes, they all depend on the design features of the heating system.

The simplest cases are major renovations and new construction during the design phase.

Even at the beginning of these stages, you can select and implement a suitable option in advance:

  • Lay communications under the raised floor;
  • Implement a water heating system built into the floor;
  • Collect drywall boxes and niches that hide the risers and piping;
  • Hide the heating pipes in the wall, laying them in gouged channels;
  • Lay pipes behind the false ceiling;
  • Use decorative screens and boxes for heating devices and pipes;
  • Decorate heating pipes.

These methods are great when building an individual house. V apartment building it is not allowed to change the places of laying the central heating pipes without the consent of the authorities.

Pipes in the apartment

The best way to close the heating pipes in an apartment is to decorate or disguise them. The choice of a suitable method is due to the need to hide heating devices, not forgetting about the conversion of air, and, consequently, the efficiency of heating.


Choosing how to close the pipes in the hall, you should pay attention to the possibility of installing a plasterboard box. In this case, the heating device itself can be hidden behind decorative panels and grilles sold by retail chains. Retail chains offer a huge assortment of these products with a wide range of colors, suitable for almost any interior. Using foil for a radiator can improve heat dissipation.

Pipes in a private house

There are several options for hiding heating pipes in a private house. They are directly related to design features building.

If the base of the floor is concrete, the pipes can be used to heat the floor. In this case, a screed and additional insulation of the base are performed. Usually, expanded polystyrene serves as a heater, and a damper tape is installed in the places where the screed is adjacent to the walls.


If floor heating is not needed, then pipes are laid in the base grooves (read: ""). It is necessary to pre-insulate the pipes. The pipes are attached to the base with staples. Before embedding the heating pipe, laid in the groove, tests are carried out for the tightness of the pipe joints.

Are erected quite often wooden houses... The use of wood in structural elements allows you to easily solve the problem of how to hide heating pipes in a private house.

The line leading to the devices can be laid under the floor along the logs, or crossing them, having previously drilled holes for the pipes. The logs must have a certain margin of safety so that the places weakened by drilling do not affect the strength of the floor covering.

Boxes for pipes

Very often there are situations when the heating system has already been installed. In deciding where to hide the pipes, the device of boxes will help. Having decided to install the box, you should calculate its dimensions. The parameters of the duct are determined by the diameter of the pipes, their number, as well as the distances between them. A gap is provided between the walls of the box and the pipes for linear and volumetric expansion of the pipeline.


Stages of the box device:

  1. Preparation of frame elements. They can be made of metal profiles or wooden beams.
  2. Drawing markings on structures depending on the location of the pipes.
  3. Installation of the frame with its fastening to the wall.
  4. Frame cladding.
  5. Decorative finishing of the box.

If the distance between the extreme racks is more than 0.5 meters, additional racks are introduced between them. If the height of the racks is more than 1.5 meters, it is necessary to arrange horizontal jumpers.

Before facing the frame, you should put on a special cover on the heating pipe, which will reduce the heat loss of the system.

Pipes in walls and floors

Hiding the liner in the walls and floor is the least preferred way of deciding where to hide the pipes. This is due to the need for free access to the wiring for repair work in the event of its failure.

Not all pipes can be hidden in walls. There is a direct dependence on the pipes used in the system. It is allowed to install in walls and floors metal-plastic pipes on permanent joints, pipes made of cross-linked polyethylene, stainless steel, copper (read: ""). Polypropylene pipes, as well as metal-plastic pipes with compression fittings, cannot be laid in the wall, since they need to be periodically tightened.


For these purposes, grooving is performed in the wall with the required furrow dimensions. A heat-insulated pipe is placed in the resulting groove and monolithing is performed.

Only flat sections of the pipeline, without joints, can be cast into the walls.


Observing technical requirements, you need to create free access to:

  • heat metering devices;
  • flanged and threaded connections;
  • taps for regulating and shutting off the coolant flows;
  • pumps;
  • expansion tanks and other equipment.


Before embedding pipes into a wall or floor, it is mandatory to test the system for leaks. It is advisable to sketch a scheme for laying heating pipes in a wall or floor for possible repair work in the future, which will help prevent violation of the integrity of the hidden pipeline.

Plasterboard for masking pipes

The vast majority of pipeline camouflage cases are related to drywall. Both in auxiliary and in residential premises around vertical and horizontal sections it is convenient to create a frame consisting of a galvanized profile or wooden beams, and then sheathe with drywall. There are only two options for using this design: the device of false walls and the installation of the box.

If your desire is to mask the heating pipeline with plasterboard, you must comply with some conditions:

  • It will be necessary to replace the heating pipeline if it is too worn out and its further operation threatens an emergency;
  • Install press fittings instead of detachable ones on metal-polymer pipes;
  • Insulate steel and copper heating pipes;
  • In the places where heat meters, couplings, tees and outlets are installed, make inspection doors for quick access to them in the event of an accident.

With a desire to disguise with drywall polypropylene pipes should part. By the way, it is not recommended to make a heating system using this type of pipes at all in view of limiting them to the optimal temperature regime use.

The advantages of using drywall for masking are explained by the inexpensive cost of the structure, the availability of materials, the ability to do everything with your own hands, quick disassembly of the structure, if necessary. From drywall, you can mount a structure of any shape.

The main points of the false-wall device are the same as when installing a drywall box. The only drawback of this design is the reduction in the area of ​​the room. The false wall is made out like other walls of the room, therefore it is not striking.

Pipes and ceiling

In old buildings, it is often necessary to decide how to hide pipes on the ceiling.

The most popular is the use of hanging decorative elements. Stretch ceiling is the least convenient option, since if it is necessary to access the pipes, it must be completely dismantled.

Hiding radiators

The most affordable, but not very aesthetic way is to use hinged screens.

If the heating device is placed in a niche, it can be covered with a flat screen.

The screen-box makes it possible to completely decorate the heating device, as well as act as decorative elements - a hanging shelf or stand. Photo printed glass panels are popular solutions. They allow you to close the devices from the front, leaving space for air convection at the bottom and top.


Whatever screens for heating devices are, they must have some properties:

  • Do not reduce the heat transfer of the devices;
  • Protect children from burns from heating appliances, sharp corners;
  • Have a decorative function.

We wish you to beautifully hide pipes and heating devices, without affecting the efficiency of their work.

Modern interiors delight the eye with exclusive design solutions, extraordinary design of space, and sometimes a classic combination of simplicity with functionality. Anyway engineering Communication in their original form, they can look good only in loft-style rooms. In all the rest, pipes are an undesirable element and need to be masked.

Not only the happy owners of elite housing, but also everyone who is not indifferent to aesthetics, is worried about how to hide the heating pipes in an apartment. Openly laid communications usually look very unsightly, therefore, they cause a natural desire to decorate them or completely hide them. With a little imagination, you can use modern materials to give the elements of the heating system a unique decorative view.

Features of decorating pipes in a private house and apartment

There are most options on how to hide heating pipes in a private house. Internal communications of private buildings are in no way connected with neighboring ones and, accordingly, if necessary, can be laid and relocated as they please. If changes in the configuration of the heating system are planned in an apartment building, then it is necessary to take into account the interests of all residents and to agree with the operating organization.

Pipes can be completely hidden only during construction or major repairs. For this, a hidden gasket is used in the walls or in the floor. Insulated pipelines are placed in grooves and covered with mortar or hidden under moldings. In individual heating systems, floor heating can be arranged. In private houses, it is convenient to hide communications between the logs of wooden flooring. It remains only to cover the intersection of pipes with the floor with decorative overlays, as shown in the photo.

Most of the inconvenience to apartment residents is caused by trunk transit pipelines, which, due to their large size, are difficult to hide. In addition, overdoing it with shelter, you can lose some of the heat entering the room. To disguise them, only external decoration techniques are suitable.

On a note: decorating heating pipes in your home, you do not have to worry about changing their heat transfer. V individual systems heating the rooms will remain the same, only the ratio of the amount of heat coming from pipes and radiators will change. But in apartments with centralized heating, you have to save every kilocalorie of thermal energy and leave the pipelines as open as possible.

One way or another, any actions in relation to the elements of the heating system affect its functioning. Before taking drastic measures to move pipelines out of sight, you should study the complete scheme of the existing wiring and analyze the possible consequences.

Important! A hidden gasket can only be used if new high-quality pipes are used without threaded connections. All collapsible sections and fittings must remain accessible for service. This is especially important in apartments, where the occurrence of an emergency situation is fraught with flooding of neighbors.

In some cases, decorating openly laid pipelines and radiators is the best option. This allows them to be made invisible with minimal cost without violating the integrity of the walls and floor and without changing the configuration of the heating circuit. At the same time, all design parameters of the heating system are preserved and free access for ease of operation. When choosing how best to decorate a heating pipe in a room, one should be guided both by considerations of aesthetics and preservation of functionality.

5 ways to hide heating pipes

Open pipe laying does not mean a hopelessly damaged interior. Elements of the heating system can always be covered with frame structures, decorated with decorative elements or artistic painting. From the whole variety of options, we highlight 5 main ways of hiding heating pipes in a private house or apartment:

  1. Using the screen protector
  2. Installation of the frame box
  3. False wall construction
  4. Decorating with scrap materials or plants
  5. Coloring and patterning.

Let's consider each of them in detail.

Using the screen protector

The easiest way to hide heating pipes in an apartment, and sometimes in a private house. It is fast, relatively inexpensive and does not require the involvement of specialists; it is applicable even for pipes remote from the walls. It is enough to choose the model you like and fix it in the right place. Screens can be made of metal, wood, plastic, chipboard, MDF. There are many configurations in the most different styles... The annoying screen can be easily replaced. If you wish and have the skills to work with wood materials, you can make them yourself.

Screens for radiators made of tempered glass or transparent acrylic deserve special attention. They are quite durable, easy to remove, easy to clean, and have a wide range of colors. If necessary, screens can be made in any size to order. It is possible to print pictures and photographs, apply various patterns. Stained-glass screens are also used, which look very impressive with backlighting. Such elements can enrich even the most sophisticated interiors.

Decorative screens can cover not only the batteries themselves, but also the pipes going to them. The main thing is to carry out the correct measurements and choose a model, the best way in harmony with the rest of the interior elements. The photo below shows the use of backlighting in combination with a textile braided screen.

Perforated panels and grilles, which are installed in the openings of frame structures, are also used as screens for radiators. This option allows you to completely hide all elements of the heating system, but is applicable only if the batteries are located in niches or if a false wall is mounted at a considerable distance from the existing one. For ease of maintenance, the screens are removable.

Advice: by gluing a sheet of foil-insol behind the radiator, you can noticeably improve the heat transfer of the heater and increase the temperature in the room by a couple of degrees. This will compensate for the effect of the decorative screen, which prevents natural heat exchange and reduces heat gain by 5-15%, depending on the model.


Installation of frame boxes

This method allows you to close the risers and horizontal sections that violate the overall harmony of the interior. A frame of wooden beams or metal profiles is constructed around the pipes, which is sheathed with plasterboard sheets, PVC panels, plywood, OSB-boards, MDF or clapboard. The finished GKL box can be painted, wallpapered or overlaid ceramic tiles... The design looks very impressive decorative stone and the use of backlit stained glass windows.

Thinking over the design of the box. it is recommended to provide removable parts or openings with inspection doors at the locations of threaded fittings, control and shut-off valves. It is convenient to use panels with latches or magnets. If necessary, the box can be turned into a household cabinet or bedside table. This is especially true in small bathrooms.

Important! It is possible to close pipes with a blind box only if they are new and have already been installed hydraulic tests confirming the reliability of the connections.

The dimensions of the box are taken based on the number and diameter of the pipes. In this case, it is necessary to leave gaps of several centimeters for the free movement of communications under the influence of thermal expansion and for convenience Maintenance... It is desirable to cover the pipelines themselves with thermal insulation. It is inexpensive, and heat leakage for unnecessary heating of the inner space of the box and back wall will prevent.

False wall construction

If the heating pipes in the room take up a lot of space or there are other communications in addition to them, then it makes sense to consider such a shelter option as a false wall. It is mounted according to the same principle as the box, but it covers the entire wall, not just a part. Accordingly, it takes up more free space and reduces the area of ​​the room.

The main advantage of a false wall is the absence of even the slightest traces of communications. At the same time, there is no need for dirty work on wall chipping, pipes are completely hidden without dust and unnecessary debris. If access to the piping is required for maintenance or repair, the wall can be partially disassembled and reassembled without too many problems. In order not to disassemble large areas, opposite pipes and especially their connections provide for the installation of small panels.

If, to divide the space in the room, frame wall drywall, then it is just ideal place in order to hide communications. There is always a free space of 50 to 100 mm between the sheets, which is quite enough for placing heating pipes. It is convenient to hide pipelines running under the ceiling behind suspended structures.

The main disadvantage of a false wall is the difficulty of detecting leaks in an accident. Therefore, the quality of pipes and their installation are subject to high requirements... Old pipes definitely need to be replaced. The number of connections should be kept to a minimum. If you cannot do without joints, then preference should be given to welding or crimping. Threaded connections and the valves remain open or located behind doors or removable panels.

Decorating with scrap materials

A good opportunity to hide pipes, while maintaining free access to them, is given by their disguise as vegetation or interior items. The most popular materials for decorative finishing are artificial flowers, twine, cord, rope, ribbons, fabric, buttons and stones. It is very convenient to use bamboo. It is easy enough to find a barrel of a suitable diameter. There are a lot of decor options, you can use any available materials that match the style of the room. Some of them are shown in the photo.

This way of hiding pipes gives you unlimited creativity. A riser wrapped with hemp rope looks good. With a little imagination, it can be easily turned into a tree trunk or branch. Disguise as a birch is often found. Convenient supports are obtained from horizontal pipes for hanging decorative items, curtains or shelves.

Coloring and patterning

All the methods of masking heating pipes described above reduce the flow of heat into the room to one degree or another. One of best options How you can hide the heating pipes in an apartment in order to preserve their heat transfer is painting and applying various drawings. Nice results gives both artistic painting and decoupage coated with heat-resistant varnish.

Provided that you do the work yourself, this method is the cheapest, since the metal elements of the heating system still need to be painted, and the paint consumption for patterns is insignificant. In the case of decoupage with napkins, the costs are generally minimal. At the same time, pipes and radiators turn from ugly objects that you want to hide into interior decoration.

Important! The paint must be applied to a cold circuit with the heating system turned off, otherwise, if it dries quickly, it may crack or simply lie in an uneven layer with spots and stripes.

In order to give the elements of the heating system a decorative look, painting is sometimes used even of plastic pipelines and heating devices already covered with a protective layer. A well-chosen color scheme can make pipes and radiators the main highlight of the interior, or it can help to harmoniously fit them into the atmosphere and make them invisible.

When choosing a paint, it is necessary to pay attention to parameters such as color gamut, resistance to fading over time, gloss, ability to withstand high temperatures, good adhesion to the corresponding substrate. Environmental friendliness and smell are also important, since, while painting, you will have to breathe in vapors of paints and varnishes for quite a long time.

Advice: in no case should you save on the price of paints or brushes. After all, the brave design solutions for successful implementation, they require the use of the highest quality materials.

The most in a simple way How to hide heating pipes is to paint them to match the walls. Nevertheless, the time spent on artistic painting always pays off subsequently with the aesthetic pleasure of contemplating the resulting paintings.

An ordinary radiator can become a canvas for an artist's work. With the help of brushes and paints, skillful hands are able to turn a heater into a real work of art.

Conclusion

Modern pipelines have a long service life and allow hidden gasket... Nevertheless, in some cases, the elements of the heating system are exposed and decorated. There are quite a few ways to mask pipes, the choice of the most suitable one depends on the characteristics of the room and the aesthetic taste of the owners.

If you have creativity and a willingness to take the time to decorate the heating pipes in the room, you can do it yourself. This will allow you to decorate the interior with minimal cost.

Did you like the article? Share it
Print article
To the top