Materials for the fence from the professional flooring. Fence from the professional sheet do it yourself: the choice of components and type, assembly technology, calculation of the cost

The main advantages of the fence from the professional flooring are relative low cost compared to other building materials for the fence, durability, subject to the lack of mechanical damage and the ease of installation. Profile is a steel corrugated sheet with a protective layer, it provides noise and dustproofing, it is fireproof, well combined with other materials.

Properly installed by your own hands the fence from the professional flooring will serve a dozen years. Terms of operation of some types of fence reaches 25-35 years, depends on aggression ambient (Sea wind, ammonia sediments from the enterprise, etc.). You can do a different height of the fence, on it there is a different pattern, mimicing brickwork, stone, wood and others.

Professional flooring

When searching for a suitable professional flooring for a fence, you will find that the difference between them is the coating material. These types of metal coating are distinguished:

Polymer coating. Increases the level of protection of the professional flooring and gives back painting at the production stage.
Plaserisol. It has a thicker coating layer that gives protection not only from the aggressive environment, but also from mechanical damage. Such protective material provides greater durability.

Attention should be paid to what the professional footsteps are also distinguished. Metal photographs with increased thickness used in carrier structuresA professional sheet with a minimum thickness is suitable for the fence (the height of the ribs about 21 mm, the thickness of the metal is up to 0.5 mm).

Observing all the listed tips, do not forget about appearance fence. You can choose monotonous color or various drawings.

Recruitment of profiled sheet

For the installation of the fence from the profiled sheet, metal poles are used (economy option), or the brick column is underway around the pipe (expensive version). Poles are installed with the same distance (after removing the length of the fence and breaking on the same segments) or, for example, on the segments of 2.5 meters, and one segment will be "fact".

The pillars are concreted, give concrete to type the fortress (depending on weather conditions), and install transverse lags (metal square or rectangular pipes) by welding them to the main vertical columns.

The last step is the installation of a profiled sheet on transverse lags with rivets or roofing screws.

General scheme for the construction of the simplest fence from corrugated

All installation work can be divided into several steps that will look below.

Marking line of the fence.

Directly the first stage of work is marked and transferring data to a sheet of paper. Calculate the number of segments (spans) By observing a simple rule of the installation of the fence from the professionalist - the distance between the vertical columns ranges in the range of 2.5 - 3 meters. It is very convenient to "mark" future supports with wooden pegs or pieces of fittings.

Concreting metal columns.

The height of the poles depends on the planned height of the fence. For fences standard height 2 m, the concreting depth is 100-110 cm below the soil surface, for higher fences, respectively, increase the depth of concreting, and lower for low fences.

I dug a hole. It is necessary to proceed to knitting a skeleton from fittings for concrete (increase the durability of concrete). Next, we prepare concrete - 1 part of the cement on 3 parts of sand and 4-5 pieces of rubbank or slag, water. Pour the pellets of the pit with supports, after checking them with the construction level from all sides and fixing so that it is not to shift at the pouring, although specialists always recheck the metal poles with a building level after the fill.

Depending on the weather conditions, the concrete must be gained a fortress for three days (with a heat - wet the concrete with water every day, it will give an extra fortress, and during the rain and cold, this period must be increased by 1-2 days).

Mounting transverse lag.

Next - installation of transverse square or rectangular pipes. This is done using the welding machine by "welding" transverse lag to the vertical columns. Two transverse lags are enough for a two-meter fence. Welding places should be covered with paint soil to provide corrosion protection.

Fastening profiled sheets.

The final stage of installation of the fence is the fastening of the proflists. Sheets are installed with "Fasting" to a nearby sheet into one wave. Fasten them to transverse lags with roofing screws. Also, it is also necessary to leave the bottom of the leaf of a small lumen - from 5 to 10 cm. In order to provide the possibility of snow and rain precipitations not to accumulate and for imagination by the wind.

Required for fence

Before direct installation of the fence, you need to calculate all the necessary materials. The most important material is a profiled metal sheet that fills the main scene of the fence.

Specialists in installing a fence from the professionalist recommend using a sheet with C18 or C21 encoding.
Next, you should stock up with metal columns for the vertical installation. It can be square pipes 60 * 60 or 40 * 40 mm, or round pipes with the same diameters.

We will also need metal transverse lags (rectangular pipes with dimensions 40 * 20 mm), to impart major stiffness and strength. They will be installed profiled sheets.

From tools during execution mounting work It will be necessary to use such:

Shovel and scrap - for land work.
Bulgarian with a cutting disk - to cut the reinforcement and pipes.
Concrete mixer, buckets - preparation and fill concrete.
Tassels - for painting metal pipes.
Drill or screwdriver - for attaching a replicated sheet to transverse metal lags.

It will also be necessary in the works - a construction level, a rope motkin or a twist (for marking), a roulette, pencil, gloves and a variety of consumables (cutting discs, electrodes, etc.).

Metal preparation for mounting

The durability of paint coatings applied to the metal surface depends on the proper preliminary preparation of the metal surface to the color. Terms of operation directly depend on the state of the metal to painting. Therefore, if metal pipes were placed in stock and covered with a small layer of corrosion, it is necessary to delete it.

There are two types of metal preparation to painting:

Primary preparation. We carry out such preparation to remove Okalin, dirt and rust, as long as the bare steel remains.
Secondary preparation. Preparation of the surface with leaving the firmly linked parts of organic and metal coatings.

After these phases of preparation, it is necessary to degrease (White-alcohol, gasoline or acetone) metal surface under painting, then apply a primer layer. After grazing the primer paint layer, apply one or more layers, depending on the aggressiveness of the environment.

After installing vertical columns and metal transverse lags, it is necessary to knock off the whole scale and slag after the welding machine, and to cry out the welding places into one or more layers.

Procedure for installing supports (columns)

After all metal supports are prepared (cut and scratched), you must begin to install them. Sick stages this process:

Marking of the territory. We divide on the segments, insert the pegs and stretch the harness.
Digging holes. With the help of shovel and scrap or with a manual (electrical) brown.
Pillow under concrete. At the bottom of the pit we fall asleep the pillow from the sand and rubble, then the trambra of it.
Installing a pillar. We establish a support and align it in terms of level and plumb.
Pouring concrete. Flip concrete solution and fix the pole by level using boards and auxiliary material.

We definitely install the posts for the fence from the professional flooring, since they precisely ensure the strength and durability of the whole design. At this stage, you should not hurry, because it is better to spend a little more time now than a few years to correct, or even redo the fence.

Installation of metal transverse lags (jumpers)

Installation of the jumpers is performed using a bolted compound or clamps (relatively old method) or with the help of a welding machine, which is currently one of the most reliable and rapid ways.

Specialists in the installation of fences of this type are recommended to secure lags at a height of 25-30 cm from the surface of the foundation or land, and at the same distance from the alleged top of the fence. Thus, the optimal strength of the structure is achieved.

Council. If you make a fence of 3 m long, then with the length of the transverse lag in 6 m, the minimum amount of remnants of the metal tube will go out, since the lags will be enough just two spans.

Setting profiled sheets on skeleton design

After the implementation of the main labor-intensive works, it remains to attach a professional. The easiest way to fix sheets to transverse lags using self-driving screws (roofing screws). Thanks to the special tip of the self-press, he, with a drill or a screwdriver, drills the hole with carvings.

When screwing the screws, it is important to remember:

Weakly twisted self-tapping screw will continue to cause leakage with trace of corrosion.
Highly twisted self-tapping screw, causes the deformation of the profile sheet.
The crookedly screwed screws disrupts the integrity of the metal and creates a loose fit of the gasket, which becomes the cause of corrosion.

Correctly twisted self-tapping screws are considered to be screwed at an angle of 90 degrees with a pressure, not allowing reliating or deformation. Screw the screws into each third wave.

Prices for fences from professional flooring with installation

The cost of the fence from the profiled sheet depends on the thickness of the metal, the presence of a colored polymer coating from one or two sides, the length and height of the fence. Also, the price depends on the method of concreting and the foundation under the fence, the presence in the design of additional elements (gate, gate, brick poles, etc.).

Here are some of the approximate prices for a variety of types of fence from the professionalist (with a height of 2 m with local concreting of vertical pipes):

The fence from galvanized professional flooring is about 1400 rubles per 1 meter.
The fence from the profiled sheet with a polymer coating on one side is from 1600 rubles per 1 meter.
The fence from the profiled sheet with a polymer coating on both sides is from 1,800 rubles per 1 meter.

In addition to installing the fence itself, it is necessary to take care of the entrances and entry into the territory. Prices for some additional attitudes of related work:

The wicket from the proflist (width to 100 cm) with handles, lock and thawed - about 5,000 rubles (manufacturing and installation).
Swing gates (from 3-4 meters) with valves and loops - 10,000 rubles.
Brick poles in a half brick - 8000 rubles / pole.

Despite the fact that you can install the fence on your own, it takes quite a lot of strength and time, so it is often more profitable to order the installation of fence from professionals.

One of the most inexpensive fences For the cottage or private house - from the professional flooring. His design is simple - the inserted pillars to which transverse lags are attached. A stranded straightener is attached to this lattice on the self-tapping screw or rivet. Everything is really easy, especially if you know how to use the welding machine. Although there is a technology without welding - on bolts or on wooden crossbars. In any case, the fence from the professional flooring can be built with your own hands. You can do all work if necessary, perform alone, but when installing sheets is more convenient with the assistant.

Construction with metal columns

The simplest manufacture is a fence with a metal posts covered in the ground. You can use round or square pipes, but it is more convenient to work with square-profiled.

Design of fence made of professional flooring with columns

The length of the pillars is taken depending on the desired height of the fence, plus is added from 1 to 1.5 meters to the shock in the ground. Put in the soil is necessary below the depth of the soil freezing. For each region, the soil freezes at different depths, but in the middle of Russia it is about 1.2 m. When determining the depth, to which the pipes burst, it is better to be restrained and make the wells deeper. Otherwise, the forces of winter racks are simply pushed out, and your fence fell (see photo).

Insufficient bulleting of the support pillars led to the fact that the fence was glanced

For pillars, a profiled pipe is usually taken with a cross section of 60 * 60 mm with a wall thickness of 3 mm. The distance between the columns is from 2 to 3 meters. The greater the thickness of the proflist, the less you can put pillars. If the ground is sinking hard, it makes sense to make distances more, otherwise you can save on the purchase of metal - the thinner, the cheaper and the price difference is essential.

Lags for the fence from the proflist make from profile pipe 40 * 20 or 30 * 20 mm. Second option - wooden bars 70 * 40 or so. When using wood, a significant amount is saved, but the tree disappears faster, besides, it is corrosive from moisture. Most likely in a few years you will have lags to change, and they will already be metallic. But how the economy will go for several years.

Fence from corrugated flooring on wooden lags

By making a fence from a professional flooring with their own hands with wooden lags, do not forget to carefully treat the wood with an antibacterial composition (for example, Sezheng ultra). It is better to do it in the bathroom - immerse the bars for 20 minutes to the solution completely. So they will serve longer.

The number of lag depends on the height of the fence. Up to 2 meters - enough two, from 2.2 to 3.0 meters we need 3 guides, even higher - 4.

In detail about the choice and construction of the foundation for the fence, read here.

Methods of fastening Lag to the columns

Metal lags weld or between pillars or in front. The first way is more laborious, and more waste is obtained: you have to cut pipes into pieces. But with this location, the lag design turns out to be more rigid: each pillar serves as a support for the sheet and it is less "walking", if you wish along it, you can put a couple of additional fixings.

If you weld the pipes in front of the post (from the side of the street), the works are less, but it will be necessary to cut anyway and waste will be: it is necessary that the weld seams of two sites occurred to the pole. Is that you give up the distance so that they go smoothly. Then the materials are purchased previously, and then count the step setting step.

Conduct metal lags to columns in two ways

For fastening wooden bars, holders are welded or on sides - metal corners or P-shaped guides. In them, then drill holes and fasten with bolts or screws.

There is an option to assemble the fence from the corrugated floor without welding. There is a special fastening elementwhich is called the X-bracket. This is a cruciform plate with curved edges, which is attached to the self-tapping screw.

X-bracket for a fence from the professional sheet without welding

So everything looks in mounted state

Professional flooring for fences

For fences, a professional sheet with marking C - for fences and walls is used. Still have n and ns, but they are not suitable for fences - it's more roofing materials. You can rarely meet the marking a and r, profiles and can be used for fences.

In the marking after the letter there is a digit - from 8 to 35. It means the height of the ribs in millimeters. So C8 means that the professionalist is intended for the fence, and the wave height is 8 mm. The greater the wave height of all the more rigid surface. With strong winds, take at least C10, or even C20.

Sheet thickness - from 0.4 to 0.8 mm. The most optimal option is 0.45 mm thick or 0.5 mm. They are suitable for the fence of up to 2.5 m of height. If you need higher, take at least 0.6 mm.

The height of the sheet is usually around 2 meters, you can find 2.5 m. The width is very different - from 40 cm to 12 meters. Different plants produce various profession in the format.

Standard colors palette in which profiled metal sheets are painted

Professional flooring can be galvanized, can painted (painted 15-25% more expensive than galvanized). The paint is applied in two types: powder and polymer coating. Powder coating is more resistant, but also more expensive.

There are sheets painted on the one hand - from the second is a galvanized, covered with ground gray, is from two. Bilateral coating, naturally more than one-sided color, but the view is better, and the service life is more.

This is a view from the courtyard on the fence with bilateral coloring

Supporting pipes and lags for the fence are usually ground, then color. And somehow he was heard that they were painting their dark paint. Attaching then painted on one side, the professionalist get a clearly prominent "skeleton" on a light gray background. On a small plot it happens critical. Pay attention, and building a fence from the corrugated hand, paint the carrying frame into a light gray color. The result will please you: it looks much better from the courtyard.

How to mount a professional carcass

Fasten the sheet with self-draws or rivets. Self-tapping screws are galvanized, there are painted. Pick them in the tone color of the fence. Spin the screwdriver using nozzles.

The installation step depends on the wavelength and the height of the fence. The higher the fence, the more often you need to install fasteners. It normally holds if it is mounted on a wave to increase strength, with two lags can be mounted in a checker order, and not one over the other.

When installing it is important to set the first sheet vertically. Then everyone else will be installed without problems. When laying sheets, the following enters the already mounted on 1 wave. Fasten into the bottom of the wave. It is necessary to install a self-reading. Then the hole is overlapped with a washer and precipitates will not cause paint peeling.

About how to mount a professional on the fence, watch the video.

Fence from professional flooring with your own hands: photo report

The fence from neighbors and frontal was built. The total length is 50 meters, the height is 2.5 m. The brown straight professional is used on the front-line, galvanized, thickness is 0.5 mm, C8 brand.

In addition, such materials went:

on the pillars, the profiled pipe is 60 * 60 mm, the wall thickness is 2 mm, pipes 3 m length;
on the columns of the gate and the wickets put 80 * 80 mm with a wall of 3 mm;
lags 30 * 30 mm;
gate frame and wickets 40 * 40 mm;

A finished fence from a professional flooring with her own hands built one person

The fence is mounted on metal pillars, between which the base is then flooded. It is necessary for the owners, because before the fence it is planned to break the flower bed (you see the fence under it). Also, he is needed that water during abundant rainfall does not pour the courtyard. Metal sheets are attached not immediately from the ground, but slightly retreating. This gap is closed with a carving - ribbon, which remains in some industries. This is done specifically not to overlap air access in order for the earth faster than the sink.

View from the inside on the finished fence

Preparation of metal

The first stage is the preparation of pipes. From a warehouse, the pipe comes rusty to serve it for a long time, you have to consider Ruz, then process "anti-fruner" and after painting. It is more convenient to first prepare all the pipes, process to and paint, then only start mounting. Rust picked up with a metal brush installed on the grinder.

Pipes need to be cleaned from rust

Pipes in the warehouse were only 6-meter. Since the height of the fence is 2.5 meters, you need to bury another 1.3 meters, the total length of the post must be 3.8 meters. In order to save, cut in half into 3-meter pieces, and the missing jokes with a different scrap metal available in the farm: cutting corners, fittings, pieces of different pipes. Then everyone cleared, primed and painted.

Installing columns

The first to put two angular columns. Jama drilled bought in the store a brown. The soil is normal, one hole depth of 1.3 meters went about 20 minutes.

Bur for the holes under the poles

The first pillar was exhibited horizontally and so that he climb over the soil to a height of 2.5 meters. To set the second, it took to repel the height. Used water level. It is necessary to pour it so that there are no bubbles - from the bucket, and not from under the tap, otherwise it will lie.

Announced the second pillar on a repulsed mark (put on the bar, which was set near the hole) and were concreted. When the cement grabbed, the twine was pulled out between the colums, according to which everyone else was aligned.

The fill technology was standard: a rolled regteroid was installed in the well. Inside, put the pipe, poured with concrete (M250) and exhibited vertically. The level was controlled by a plumb. Properly set the pillars - it is very important, otherwise the whole fence will be bothering.

In the process of work, it turned out several times that the concrete was flooded not inside the rolled rubberoid, and between him and the walls of the pit. It's a small pleasure to screamed him from there, because the protruding part was cut on the petals, pinned with large nails to the ground. Problem solved.

So recorded runneroid

After the concrete grabbed, they made a portable formwork from the boards, covered with a dense film. With their help flooded the base. So that it is stronger, on the bottom to the columns on both sides, the rods of fittings are welded. The formwork was raised around them.

Formwork for socle

Installing jumpers

Purified, primed and painted pipes for the crossbar cut and welded. Cook between pillars. They are also tedious to put it in the level to secure it easier.

Cook jumpers

After the welding is over, all welding places are cleaned with a wire brush, processed "anti-javic" and after painted.

Installation of the professional sheet

Since the upper jumper passes along the very top of the fence, and it is welcome to level, there were no problems with alignment and installing sheets. Boldly first at the edges, then the intermediate screws were installed. To make it easier to put them smoothly, they pulled a thread between extremes.

Exactly installed fasteners - also beautiful

After the gates were cooked and attached. As the last barcodes are installed on top of the good elements - the P-shaped profile, which closes the tip of the fence and plugs on the pipes.

The final view of the fence from the proflist made independently

As you understand, there is nothing particularly difficult. It is important to set exactly the pillars and welcome the frame. This is the main task. A lot of time - about 60% goes to prepare pipes - cleaning, primer, painting.

Fence from the professional sheet with brick columns

Professional property in combination with brick pillars looks solid

Of course, a fencing with brick columns looks more decorative. If you wish, you can do it, but the time will need more. There are two options:

Making a full ribbon foundation. But it is long and expensive. On well-drainaged soils, it is possible to make the foundation of a small embedding, it will have to be buried below the depth of the soil freezing. And even though the tape will be non-screamed, a lot of work - for the entire length of the fence to dig a trench, put a formwork, knit reinforcement, pour and then finish. On top to put brick poles. Firmly, reliable, but expensive.
Make according to the scheme described above: carrier pillars with the basement. Around the pillars lay a brick. This method is less expensive. About how to put a brick poles read here.

Conceptual image of a fence design with brick columns

All technology is the same, only reinforcement will need more rigid - two belts of two rods with a diameter of 10-12 mm. In the posts it will be necessary to install mortgage elements to which the guides will be attached. Their (mortgages) can be welded to the pipe, after it is exhibited and grabbed the solution.

Stock Foto Design of fences from the proflist

A profiled sheet is combined with a forging, sometimes boils the frame from the profile pipe, a straightener is mounted in it and all this is decorated with metal patterns - forged or welded. Another option to make the fence is non-standard - install the wave is not vertically, but horizontally. A small, seemingly change, and the view of the other. Some ideas in the photo gallery below.

Horizontal fence from the proflist

Beautiful combination of stone, forging and red-brown sheet

Poles from Round metal pipeThe stripes to which the sheet is attached to them

Forging and polycarbonate inserts

More Variations on Forging

Coloring may be non-unique

Needed with nonlinear top

The fence is the main structure used to designate the perimeter of private home ownership and protecting property from intruders. Among the masses of structures and varieties of materials used, the fence from the professional flooring is rightfully considered the most simple and economically favorable decision. The design of this fence is relatively simple and is not distinguished by special labor costs. Nevertheless, the cost of services for its construction is essentially "beats the pocket" of any homeowner. In this publication, it will be told how to make a fence from the professional flooring with your own hands, eliminating this article of expenses from the amount allocated by the developer for the improvement of the territory of the private house.

Advantages and disadvantages of the fence from the profiled sheet

Professional flooring is a profiled steel sheet with an anti-corrosion surface coating. Depending on the purpose, manufacturers offer several dozen varieties of a professional leaf, characterized by a thickness, type of protective coating, shape and profile height, sizes. The main advantages of fences from this material are:

affordable cost;
high corrosion resistance;
durability;
ease of installation;
not demanding to service (painting, processing from rust).

In addition, the fence from the professionalist has a completely presentable appearance. According to reviews, a solid fence from this material perfectly protects the territory from the wind and the penetration of street noise.

The sharp edge of the sheet significantly complicates unauthorized penetration into the territory of the household.

The disadvantage of such fences can be considered: low resistance to wind loads and mechanical damage.

Nevertheless, the abundance of forms, textures and colors of the professionalist presented today in the domestic construction market, allow you to create beautiful fences from the professional flooring, using a relatively small set of tools and materials for this.

Preparatory work

If you decide to engage in the independent erection of reliable fencing from the profiled sheet, then you should not immediately run to the nearest building supermarket for the purchase of materials. Initially, preparatory work should be carried out on the site. The algorithm is the following:

Produce required calculations The number of proflist.
Determine the type of fence (solid, sectional).
Think up the support structure and the type of installation of the material.
Create a drawing (sketch) fence.
Prepare materials, tools, fasteners.

Only after performing these works, you can move to the direct installation of the fence from the corrugated floor. Next in order.

Calculation of the number of profiled sheet

In order to correctly calculate how much the proflist needs, the first thing to do is to determine the location of the fence. In the corners, pegs should be installed, and between them stretch the cord, the length of which will be an indicator of the fence length. Next, we are determined with the height of the fence.

The size of the proflift for the fence varies depending on the type of material and its purpose, but the average indicators are as follows:

width 100-130 cm;
height 180-200 cm.

The required length of the sheet, which determines the height, will damage the manufacturer or trade enterprise. Knowing the length of the fence and the standard width of the sheet it is easy to make calculations of the required amount of material: the total perimeter of the future fence is divided into a working width and get the required amount of material plus two vest sheet.

We choose the type of fence

To date, fences are practiced from a professional flooring of two types: solid and sectional. The first is easier to manufacture and requires fewer materials. The second, according to the general opinion, is more presentable, but also more costly. In the first embodiment, all the elements of the supporting structure are sewn.

In the second - the material is placed between the support pillars of the fence:

The type of fence determines its design, material and method of installation of all elements of this structure.

Design and methods for installing fencing

One of the most simple ways The construction of the fencing from the profiled sheet is the option of making a fence with metal pillars installed directly into the ground. For support, steel hollow tube round or square section is used. The diameter of the round tube from 60 mm. The cross section of the square profile is 60x60 mm.

Lags are needed to support steel pipe Square cross section or wooden timber. Recommended cross section of the steel profile 30x20 mm; wooden bar 70x40 mm.

There are three installation options:

with the help of fasteners;
through welding work;
between brick columns.

For the first option, an X-bracket is used, which is a special fastening element that is attached to a pole using self-tapping screws.

The main advantages this method Are: low cost of the fastener, high speed of the fence without using the welding machine.

In the second embodiment, three ways of fastening lag are used: jack, on the side, using the holder.

The sectional fence from the professional flooring with brick columns is quite difficult to erase. Wanted the practical skills of brickwork, creating a foundation, knowledge of the basics of reinforcement. When choosing such a fence design, it is recommended to refer to professionals, the cost of which can be very significant. Such a fence is chosen by the owners of households, which are important good wind stability and respectable appearance of the fence.

Selection of material

The first thing to do before buying a material is to carry out a full calculation of the fence from the professional flooring.

The length of the columns is calculated according to the following formula: the height of the fence + 1 m for the shock in the ground. If the fence is installed on the bunching soil, the pillars are bold below the depth of the soil. In this case, when calculating the height of the support, the height of the fence is taken into account + the depth of the bookmark of the columns.
The distance between the supports can vary from 2 to 3 meters. Among the specialists, the distance between the racks is most often practiced - 2.5 m.
To calculate the lags, you need a total length of the perimeter of the fence to multiply by two, and to the resulting digit add the necessary method for the manufacture of the gate and wicket.

Above the calculation of the required number of professional fence was calculated. Choosing this material you need to pay attention to its thickness the height of the wave, characteristics, anti-corrosion coating, color and texture. For the construction of the fence, most often choose a durable and inexpensive professional flooring, the "C" or "MP" series.

Proflists "C" are designed to cover the walls. They are distinguished by a small profile height and sheet thickness. The material of the MP series is widely used for roofing coatings, the construction of light buildings for the Compound.

Create a drawing

The construction of a fence from a professional flooring begins with creating a sketch (drawing) in which should be logged in:

location of fencing on the site;
plan of placement of reference elements;
landscape features;
fencing dimensions;
material specification.

To compensate for the landscape level drops, a ribbon foundation is used, with which all irregularities are closed.

Selection of tools

Before making a fence from a professional flooring must be prepared required toolwhich will be needed to install pillars and fastening all design elements.

In addition, it is necessary to have: roulette, marker (chalk), metals for metal and self-screws of roofing type, construction level (plumb), the necessary fasteners. Of building materials We will need rubble, sand, cement. For concreting of columns, a shovel is necessary and a container for kneading a sandy-cement solution.

Establishment of the fence from the professional flooring: stages of fixing work

Consider the process of erection of the metal fence from the profiled sheet with the installation of concreting method. Installation of the fence from the corrugated floor begins with the installation of support pillars. For this you need:

After a set of primary strength concrete (no earlier than 7 days), continue the construction of the fence from the professional flooring.

At the height of the attachment of the lower and top lags, pull the cord around the perimeter of all racks. Check its level relative to the horizon. After that, in places intersection of the cord with supports to install the X brackets. This is done as follows: In the first support, the drill make holes in the stamps of the bracket fastening and attach this element to the corner rack on the metal screws. On the next pillar to apply fastening. The correct position of checking the construction level. Produce the fastening process. Similarly, to install brackets along the entire length of the fence. Lags fix on the back side of the bracket.

The next stage is the attachment of the profiled sheet to the fence frame.

Fix the material can be roofing self-drawers or rivets. Installation step - through a wave. To begin withdraw and attach the first sheet. Each subsequent comes to the previous one wave.

It is important to know how to properly delay the roofing screws. When screwing out, navigate the rubber seal. The figure shows the options for the correct and incorrect installation.

You can get acquainted in more detail with the Rules of Fastening the Professionlet from the video:

As a conclusion

In this publication, the process was considered as detailed as much as possible how to make a fence from the corrugated hand. As you can see, everything is extremely simple. The main thing is to clearly comply with the instructions, do not neglect the calculations and do not save on materials.

Any plot of land, whether there is a cottage or a farm, should be surrounded by a hedge. The fence usually performs several functions at once: security, functional and aesthetic. But not any fence can fully comply with these parameters. Often, the unreliability of the design lies precisely in the materials from which it is made. Therefore, their choice requires careful study of the issue. This article will examine the features of the construction of the fence from the professional flooring.

Advantages and disadvantages

To date, there is a large selection of building materials, which makes it difficult to choose. Universal materials that can be used under different conditions enjoy the greatest popularity. These include professional flooring or, in other words, a profiled metal sheet.

There are few minuses in the use of metal products, and with an objective assessment, they are insignificant and quite solved. So that the fence is not swinging under the influence of wind, you need to pick up a certain marking sheets with a greater thickness. Corrosion can easily be avoided, timely processing the material with a special protective coating. And scratches can be simply painted.

The benefits of the professional flooring are more than other similar building materials, and for an ordinary person with a modest supply living in an average climatic strip, such a fencing material is suitable as it is impossible.

The main advantages are:

low cost;
the ability to establish a fence yourself, which will save on the hired workers;
the low weight of the material itself;
long service life;
resistance texture and color;
decent appearance;
ease of care;
opacity;
wide color gamut (about 300 options);
reflecting the qualities of a brilliant coating;
resistance to ultravioleti;
flexibility and impactness;
fire safety;
long service life is about 50 years.

It should be noted that some kind of building materials have such an extensive list of benefits. Professional flooring without exaggeration can be called universal and multifunctional.

But it will be possible to evaluate these properties only if it is properly used. It is believed that the fencing from the metal-turn harp and short-lived. Perhaps the reason for the dismissive relationship becomes the budget price. However, this is a delusion. This building material is clearly underestimated. In addition, such a fence is often cheaper than other types.

Giving preference to metal profile, the owner of the site will be able to raise the fence quickly, efficiently and inexpensively, corresponding to its financial capabilities and taste. Despite the relatively low price, the fencing from metal sheets is not inferior in terms of the quality of fences from more expensive materials.

Types of designs

The profiled metal sheet necessarily has a protective coating that happens:

Zinc. The coating of the material by this metal is the easiest and cheapest type of protection. Galvanized professional flooring is one of the most popular materials for the facing and erection of fences. This is a light, easy to use, easily transported material. In addition, he does not deliver inconvenience when installing. However, professionals are not recommended to give him preference. The sheet quickly rusts, and in sunny weather heats up at times stronger than any other coating.

Aluminum. With a combination of zinc with aluminum, the service life increases.

The polymer is the most reliable. Polymers are mined in laboratory conditions from the components of paints and varnishes. Sheet metal with such a type of coating is obtained from galvanized steel by cold rolling in specially intended machines. Advanced sheets with other wave parameters, differ in height, width and rigidity rigidity, are also available. They consist of pigments responsible for protecting the surface of the fence from external mechanical damage. The polymer is applied to the corrugated floor with a roller. Previously, it is necessary to impose a layer of primer to increase anti-corrosion properties.

Advantages of polymeric material:

unusual design;
ease of care;
durability and resistance to ultraviolet;
long use.

Among the disadvantages it is worth highlighting the cost increase (by about 15%). The polymer coating provides a resistant color and smooth texture. Many polymer coating varieties, each of them has its own characteristics.

Types of polymers:

Polyester - Wavy Polyester (PE)- Modern multifunctional component. Such a sheet is used both in the northern and in the southern regions. Service life - up to 35 years, layer thickness - 25 microns. The fence will be indifferent to external influences, in particular to corrosion, direct ultraviolet rays and precipitation, mechanical and chemical damage. It also has an increased heat resistance and prevents the formation of microcracks, which is the main cause of corrosion. A classic professional sheet is covered with a matte polyester layer, which has a matte surface. It gives a more expensive and exquisite appearance of the fence, so enjoys the greatest popularity. Also, the matte polyester gives additional resistance to abrasive load.

The fence with the coating of this type is ideal for the middle strip of Europe and Russia.

Plastisol (PVC).Professional flooring with PVC coated has a high resistance to mechanical stimuli, since its thickness is 200 microns. The texture can be smooth or embossed. This is the perfect option for harsh. climatic conditions. However, it is necessary to take into account that under the influence of sunlight, paint will be unpuck with time, so such a coating is more suitable for land owners in the northern regions. At the same time, plastisol is much more expensive than polyester. The service life is 35 years.

Polyurethane (PU). Professional sheet treated with polyurethane ensures protection of the fencing from ultraviolet, therefore it is recommended to use it where there is a risk of burning surface from sunlight and its damage. High resistivity and other external factors. PU sheets modified by polyamide and acrylic, easy and easy to use. In places of bends, cracks are not formed. Another important advantage is quite low cost. The service life is 50 years.

Poural. The last development of scientists allows you to apply a layer of a thickness of 50 microns on a professional sheet. The service life is 50 years, which is achieved due to the resin-based polymer-based polymer layer. Professional flooring, treated with them, has the following advantages:

resistant to a sharp change of temperature (from -60 to + 100-120 C);
perfectly opposed rust;
resistant to ultraviolet and chemical impacts.

PVDF. Such a profiled sheet does not wear out over time and is not exposed to moisture, ultraviolet rays, snow or rain, can be used at temperatures from -50 to +120. PVDF is an environmentally safe component that is applied with a thin layer (27 microns). The high price of the material is compensated by excellent properties (for example, resilience even the damage that is dangerous for ordinary spraying). Operating period - 50 years.

Printech - Patented technology of Dongbu Steel. The products of the South Korean firm are more expensive than standard profiled sheets one and a half times, however, has unsurpassed aesthetic properties. There are about 100 species that mimic natural textures - from granite to wood cutting. The service life is from 50 years.

Powder coloring.Such a method of processing is most environmentally friendly. Small component under the influence high temperatures Polymerization is exposed due to which it becomes uniform and very durable. Application is carried out using electrostatic impact. Technology allows you to achieve perfectly smooth coverage. The method is environmentally friendly, since the amount of waste does not exceed 5%. Layer thickness - from 50 to 300 microns.

Choose suitable material The newcomer is quite difficult. However, not to be mistaken, it is enough to adhere to the above recommendations of professionals.

The fence can fully consist of profiled sheets. But for greater stability, it is recommended to build a fence with the basement, that is, with a strong base. It is necessary not only to increase sustainability, but also for removal of water, which can accumulate during a strong shower. The base is several species:

with a column base;
with a column-belt base;
stone.

An option with the columns divides the entire sheet of professional flooring on the section. A columnar-belt, in addition to sections, adds a foundation over the entire base from below. In both cases, you can use both cement and brick. The same type of foundation is the most expensive, but at the same time the most reliable. However, the need for such a fence appears only in the case when the fence is built of heavier materials, for example, from wrought iron.

The calculation of the required construction tools and materials depends largely on the type of fencing and the number of sections.

Dimensions

Marking "H"applied to products with a thickness of more than 44 mm. Such professional flooring is suitable for carriersas well as for the roof and manufacture of containers. Its thickness is quite large. Use this kind for the fence is impractical and uneconomical.

Proflists S. labeling "ns"the thickness of 35-43 mm is intended for the roof. They are commonly used as a material for the fence of construction sites. In domestic conditions, the increased resistance of sheets of such thickness will not need, so it is not worth stopping and in this embodiment.

Marking "C" He has a thickness of 8 mm and is intended for the external finishing of buildings. For the construction of fences and fences around private houses, the thickness of the coating in 21 mm is optimally suitable. Despite the lightness of the professional flooring with the marking "C", it is quite strong and sustainable, only a little yielding materials with the labels "H" and "NA".

In addition to the above, there is another kind of proflift from marking "MP".This type is considered universal, it is easy and inexpensive, used both in roofing works and in the construction of buildings domestic destination, as well as for installing fences. However, the professionalist is best for the fence. from marking "C8".

Below are the parameters of the most popular brands of professional flooring in the form of Brand / Total Width, mm / Working Width, mm / Thickness, mm / Wave Height, mm / Distance Between Ribs, mm:

C8 / 1200/1150 / 0.4: 0.8 / 8 / 62.5;
C10 / 1150/1100 / 45: 0.8 / 10/45;
C18 / 1150/1100 / 0.6: 0.7 / 18 / 91.67;
C20/1150 / 1100 / 0.45: 0.7 / 20/137.5;
C21 / 1051/1000 / 0.4: 0.7 / 21/65;
CH35 / 1060/1000 / 0.5: 0.9 / 35/70.

As for the length of the sheets, there are no fundamental limitations here. The seller will approve the material of any length to twelve meters. Over the specified border, the professional sheets are also possible, but for this may need to make a special price.

The height of the fence is better to choose at the level of 2-3 meters. With such a height, you can not worry that someone can look inside or climb the fence and get to the site. In addition, the streets will not penetrate the loud sounds, the site will be protected from road dust.

Which to choose?

The next step after studying the existing species and forms will be the choice of material for the construction of the fence. When choosing components, those materials that are best for budgetary structures will be considered and will not create problems when assessing the fence even inexperienced builder.

It is quite suitable for the braking "C" and "MP". Do not buy sheets without coating, Otherwise, soon the fence will require replacement or updates. Inexpensive polyester protects iron from corrosion.

Tools and components

The design of the fence is not only metal sheets, but also a number of other components:

racks-support in the form of metal pipes;
running struts;
self-tapping screws or roofing screws.

Before buying building materials, it is important to know what amount they need. It is enough to calculate the length of the fence as a whole and each of its side separately, as well as the height of the design. To determine the number of sheets, it is necessary to divide the perimeter of the fence on the width of one sheet, after which it is rounded to the biggest side.

The height of the fence is also important because the sheet will be attached at a short distance from the ground. It is impossible to allow professional flooring to rest in the ground.

Support racks can be used both round and square shape. However, it is better to give preference to square. Their size should be 50x50 mm or 60x60 mm. For round tubes, it is recommended to choose a diameter of 50 mm. The most suitable wall thickness is 3 mm.

The length of the support depends on the height of the fence and on how deeply you will need to boil them into the ground. The height of the very fence at the same time will also be of great importance. For example, if the depth of the pocket is 1.3 meters, and the design height will be 2 meters high, the pipe with a size of 60x60x3 mm is approximately 3.3 meters.

Theoretically, wooden racks are allowed as a base. Before installing, they must be treated with an antiseptic.

It is also necessary to pay attention to the part of the pillar that will be immersed in the ground: it should be particularly strong. It is preliminarily recommended to be treated with a soldering lamp, and then bitumen primer.

Typically, the distance between the supports is made of 2-3 meters. In the terrain with strong winds it is worth cutting this gap. When calculating the number of columns, it is required to take into account that the supports are mandatory in the corners of the perimeter and on both sides of the gate or gate.

If still a desire to build a sectional fence with pillars will arise, then it will be necessary to make such a sheet of professional flooring in each section. As jumpers-lags, it is also better to use profiled pipes. It is simply necessary to determine the necessary number: for this you need the total amount of crossing to multiply by the perimeter of the fence. Optimal strength parameters possess lags with dimensions 40x25x2 mm.

For connecting supports with lags, welding will be welded. In the absence of a welding machine or experience with it, you can use bolts or special fasteners - "crabs" as an alternative. It is much easier to work with them. In terms of reliability, they are inferior to welding, but are indispensable if necessary and easy editing.

And the last thing that will be required to assemble the fence - roofing screws for metal. Size - 4.8x19 mm. Their number depends on the planned size of the very fence. For example, for the sheets of marking "C" or "MP" in 20 mm thick, it will take 4 screws for each crossbar.

If there are two lags, then you need 8 screws, if three are 12 pieces. However, such a calculation will be correct, provided that the self-screwing is properly screwed into each second wave. In all other cases, the calculation of their quantity is made individually.

So that the fence looks aesthetically, the color of self-drawing should be selected in one tone with the fence.

Production features

In addition to the main components of the design of the fence from the corrugated floor, will also be needed:

drill or shovel to dig holes under the base poles;
roulette for length measurements;
capacity for mixing the solution;
level for checking verticals;
cord for marking boundaries;
screwdriver or drill to twist the screws;
m200 marking cement, as well as sand and crushed stone for snowing racks;
crack with paint for masking scratches when installing a fence.

Install the fence from the professional flooring with your own hands is easy. There is a universal type of metal collection with a simplified device. However, it is important to understand that deciding to build a design yourself, it is necessary to take responsibility for performing additional actions that are no less significant than the assembly itself. Before the beginning construction work It is important to represent the kind of fence in the final version. For this you need:

draw a drawing of the fence, noting in the diagram dimensions (height, length in general and individual sites), as well as its exact location;
evaluate territorial features (relief, climate, other objects and plantations if available, communications device); With an uneven surface of the soil with a slope the best way - step type of construction;
think over in advance where the gate will be held, and made from the professional flooring, for travel vehicles;
clean the surface of the Earth from unnecessary objects and garbage, align small curvatures if they are in places where the fence will be installed;
determine the degree of sustainability of soil for reference pillars.

In this case, the embodiment of universal fence without foundation is considered. If you need to build a fence on the foundation from cement or brick, then it is necessary to calculate their number.

In general, the design from the professionalist with a concrete basis to build more difficult. The reason for this is the additional troubles on the fill of the belt foundation, as well as the costs of reinforcement and the concrete mixer.

The presence of a mixer machine is optional, but it will finish the work with it faster. If on the land plot is soft soil, it is recommended to use a ribbon foundation that ensures greater stability of the fencing from the metal-produce.

Step-by-step instruction

The construction process itself should be considered in more detail and consistently. So, the main stages of work:

Installation of support pillars and their concreting. Initially, it is necessary to determine the distance on which the racks will be located, and dig a holes for each of them. Typically, the distance between the columns is 2.5-3 m. The recommended depth is 1.3 m or 1/3 - 1/4 of the total length of the pillar. The thickness of the gravel and sand pillow must be at least 100-150 mm. First of all, the supports are put in the corners of the perimeter, and then on the sides of the gate and gate. Height all over the perimeter must be checked.
After installing the racks, their concreting follows.To do this you need to fill cement mortar The remaining recesses, after which fill and the cavity of the pipes. Next, the supports are left for 3 days in order for cement to harden.

Installation of lag. This stage can be started only after cement fully solids. Lags should also be treated with corrosion mortar. Next is the installation of lags to the support racks. This can be done both with welding and self-drawing. Fastening methods There are three:

installation of an online support that has proven itself as the best method;
fastening the back of the pillar using the bracket is more often used for fences with sections;
fixing the side of the rack makes it possible to attach and racks and lags to sheets, which gives the stability to the construction, but it will have to spend more time and screws.

Professionals in this case are advised to use the bracket. It connects the support pillar and lag. This method is considered more costly, but also more reliable.

Fastening Professional Station for Foundation. Here you can do without welding. With the help of special self-tapping screws or rivets, the lists of among themselves will be much more convenient. It is important to correctly determine the position of the first sheet of the professional flooring - to put it need "Vangest" in such a way that the beginning of the second sheet covered the end of the first, and the third sheet covered the second. This principle needs to be used throughout the perimeter of the fence. One layer covers the other. Sheets are attached along the edges of the transverse lag. Brackets are installed in the center of the sheet.
Rules of fastening metal sheet Require special attention. If you neglect them and carry out installation at your own discretion, then from the wind load you can quickly lose the fence. Saws is attached to the lag in the lower bending, and does not connect sheets from above. It is impossible to tighten them until the stop: they can roll off and damage the outer surface of the profiled sheet. The main thing is to secure the first professionalist. From this depends on the appearance of the entire fence, because each subsequent sheet is attached to the previous one.

If for some reason in some places there are lobes or cracks, they need to be proned. It will also be useful to purchase paint for tapping scratches formed during the installation of the structure.

You can install racks with bricks in several stages.Support poles are laid out by brick, while not to forget about intermediate jumpers. Brackets are put on top of a height of about 30 cm. Then you need to check the level. Horizontal planks are attached to the brackets. After that, it remains only to fasten the proflists with self-draws.

If there is a desire to pour the foundation of the fence concrete, then for this you need:

proceed the trench throughout the perimeter of the plot;
make a formwork;
pour it with a solution;
wait until it freezes.

To do this, you will need a flat board with a size of 2.5x1.5 cm. The formwork width can be chosen as desired, it will neatly look like a side of about 20 cm. The shields are attached to the trenches, on the ends, they are connected by self-draws. This is necessary in order for the foundation during the low tide, a leakage has not happened.

Next, pegs are put in the corners of the shields for strength. Formwork needs to be installed about 30 centimeters above the estimated border of the cement. If the fence is planned to do with pillars, the foundation for it must be monolithic. This ensures the strength and durability of the structure. In this case, it is impossible to forget about the reinforcement.

Immediately before the fill it is necessary to check if the pillars are exactly the supports.

If the concrete is inside the pipes for three days, the readiness of the foundation will have to wait a few weeks, after which the formwork can be removed. Concrete will freeze faster if 10-15 days after the fill must be applied on top of it bricks.So the density of the foundation will be higher. In the process of "maturation", the foundation should be protected from increased moisture evaporation. To do this, it is necessary to periodically water the concrete with water from the hose, and then cover with any film or wood chips.

After the foundation is ready, the installation of the fence can be continued. Pour the foundation, as well as to build a fence - the case is simple, but energy-cost and troublesome, so if possible, it is better to ask for help from a friend or a neighbor.

This kind of "nozzles" can be purchased any size in accordance with the size of the main sheet. However, there is an opinion that the unprocessed end of the fence is an obstacle to penetration of thieves, because the edges of the professional sheet are quite sharp.

In any case, close the upper end or not - each decides on their own. It is necessary to be prepared for the fact that even with the most correct calculations will still remain waste, and this, accordingly, extra costs. But this is a "production costs", and they are inevitable.

Nuances in the construction of the fence:

Experts advise on top of the base pillars to put plastic plugs - it will eliminate the appearance of water inside and the formation of rust.
When buying slats on the fence you need to make sure that their edges are concave inside. Otherwise, many scratches can be used on the surface of the sheet. Then you will have to repair a new fence.
Professional flooring is considered a rather acute material, so when working with it it is better to use strong gloves.
If you plan to install fences with columns, then one section should be one entire profiled sheet.

If there is irregularity of the relief on the site, it is necessary to note these places in the drawing: this will help to avoid errors in the installation of support pillars.
When choosing a professional flooring, it is necessary to take into account that the usual galvanized sheet will last 20-30 years, and the iron coated with polyester is up to 50 years.
The bottom of the fence should begin at a distance of approximately 100-150 mm from the ground. This will reduce the leaf from corrosion.
In case of error in the calculations or other subsequent design deformations, the formation of small slots is possible. They can be sealed with cement residues.
Before installing the supports, it is recommended to be treated with anti-corrosion coating.

Examples and design options

The fence from the professional flooring with wooden racks-supports, though used infrequently, but it takes place.

The combination of professional flooring with forging or wrought inserts looks good and prestigious. Iron products can strike in a family budget, but they are highlighted by special strength and reliability.

Even the most primitive fence can be made externally attractive. Therefore, if the budget is limited and the fence with the metal ornament will not be arranged, you can do the following:

Insert into one or several profiled sheets of the glass strips that can be vertical or horizontal lines, separate "islands" in the form of circles, squares or other geometric shapes. Any glass is suitable: matte, transparent, embossed, smooth, with an applied pattern or without it.

On the entire perimeter or on one of the front sides of the fence, apply the pattern - it looks unusual and attracts attention.

Crop the top edge of the sheet. For example, a wavy line will add the construction of individuality and give the completed view.

Decute decision fence from professional flooring do it yourself Spends certain skills and knowledge. Installing a fence from a professional flooring It requires a preliminary study of certain nuances, it is important to deal with the types of design, make a plan of work, choose suitable components and materials. The proposed review will help to understand how to build a fence, but video At the end of the article will be useful for newbies.

Varieties of structures

The variety of landscape and aesthetic requirements determine the features of the structure:

Solid fences. Profile sheets close the supports. Most often use this option.
Sectional. It is not necessary to be so often constructed in the presence of stone or brick columns. The length of the section depends on the features of the relief. Exact calculations of the length of the spans allow to reduce the amount of waste from pruning the professional leaf.

In addition, fences are divided into:

Foundation. Pillars are included in the design of the belt foundation. It increases the wind resistance of the fence. The gap under the fence is completely overlapped by proflists, besides, dust from the street will not be poisoned on the site. The construction time and the cost of its arrangement increases. So build constant facade fences.

Supporting - fences are attached to the support poles that are not related to each other. It turns out a significant savings. However, the high height of the construction significantly reduces the reliability of the fence. But it provides good circulation of soil and water on the surface of the Earth. Especially these advantages are noticeable during construction on the slope or on bulk, creeping soils, as well as soils with high humidity. Supports usually make fences between neighboring sites.

Determine the type of construction is better after creating a complete sketch of the construction site.

Necessary materials and tools

To install the barrier of any kind takes:

Profile, wave height 8-20mm.
Fasteners, rivets, screws.
Sand, gravel, cement.
Coating against metal corrosion - paint for metal.
Marking ropes, pegs.
Tools for earthworks (shovels, drill).
Welding machine, electrodes, fasteners for transverse lag.
Riveting device, drill, screwdriver, cutting devices.
Supports from the profile pipe 60x40 up to 3.5 m long for support.
Measuring tools (roulette, level, plumb).
Scroll - profile pipe 40x20.
Ruberoid, another isolating material that prevents mixing concrete and earth in the wells.

Measurements and sketch of the fence allow you to calculate the required amount of materials.

Watch the video! Errors when installing fence

Work according to plan

Step-by-step instruction To create a fence from the professional leaf, it is proposed below. Installation involves the execution of 6 stages of work. It is better to study these stages before make a fence from corrugated Strong and reliable.

Marking

The future of the fence is placed by spicyrs, which are driven into the corners around the perimeter. After measuring distances, you can determine the number of openings. Places of location of the supports are marked by spicy. It will be necessary to designate the place for the gate, wickets. There are also knots.

Tip! For a sectional fence, it is better to make the width of the spans to make multiple sheet dimensions. For solid - standard 2.5 - 3 meters are suitable.

Installation of fence on a tape foundation, including a step type, provides installation of levels. Tags put on the corresponding racks installed in the corners around the perimeter, and in inclined areas - at the beginning and end of each section.

The marking of the territory is performed independently, no complicated equipment need to use.

Project creation

To create a plan, the perimeter of the territory, the slopes are measured, indicate obstacles that cannot be transferred or deleted. These can be pipelines, electric supports. According to the measurements, the fence plan is drawn. Depending on the type of soil, the features of the relief, economic opportunities are chosen:

type of foundation;
stack design;
material for pillars and additional structures (cross beams, connecting brackets, mortgages);
types of fasteners used, finishing finish.

Drawing up a detailed sketch allows you to carry out comprehensive calculations, determine the number of necessary components.

Installation of supports

It is practiced to use such types of racks that provide durable fastening of sheets:

pipe Ordinary NKT diameter from 73 mm to 89 mm or profiled 60x60 or 80x80 mm;
poles from reinforced concrete or wood;
brickwork;
screw piles.

Installation of the profile pipe as a support

In the outlined places, the holes are deplished from 1 to 1.5 meters, with a diameter of 20 to 40 cm.

Comment! With a high height of the fence from 2 meters, the depth of the supplies should increase by 35% underground and 65% over the ground.

Racks are put in one line, applying a plumb. Vertical and linearity exclude possible difficulties of docking sheets of professional flooring.

Supports will need to be concreted. Before the fill of the solution of the edge, the holes are placed in front of the rubberoid, a polyethylene film can be applied. This will exclude the mixing of concrete and the earth, will retain the high strength of the structure. The solution is poured into a depth of 1 meter, the rest is falling asleep with sand and tamper. This method contributes to compensation of soil deformations when changing temperatures.

Important! Concrete always has air traffic jams that need to be deleted. The air is removed by the plug by the existing tools. It is permissible to use fittings or metal corner.

The remaining types of work can be performed only three days after the fill of the concrete.

Before mounting the profile pipe requires:

Make an upper cap to exclude rainwater. You can apply plastic plugs, decorative tips. It's not bad to simply brew the top of the rack.
Supports are better to immediately cover the paint of the required color.
It is necessary on the base of the supports to weld metal heels (square iron square). It will simplify the work on pillars. Fastening will be more reliable and reduced the sediment.

Installation of reinforced concrete or wooden poles

Installation of wooden or reinforced concrete supports is carried out in a similar way, as when installing a NKT or profile tube. Wooden supports are short-lived.

The reinforced concrete pillars have too much weight, it is difficult to attach to them to attach. It is better to install such elements on a ribbon foundation.

Installation of brick columns

The installation of brick columns involves the presence of a ribbon foundation, since the weight of the design is very large, the pressure on the ground increases. Such pillars are established difficult, significant costs and additional creation of waterproofing are required.

Installation move repeats the installation of the profile pipe, which is later plated by brick.

Important! When installing brick columns, it assumes the installation of metal mortgages, which are used when fastening the transverse elements of the fence.

Watch the video! Fence from professional flooring. Very budget option

Fence on screw piles

Advantages of mounting:

creating a traditional basis;
it is applied on any soil;.
no need for the use of special equipment, high installation speed.

Proper anti-corrosion processing ensures the service life of more than 50 years.

However, there are disadvantages. Screwing in the stony soil disrupts the protective coating, the visual detection of damage is impossible. Racks to piles are fastened with welding. Its conduct requires a certain qualifications, experience. Installation on piles of columns using screw connections is carried out after welding flanges.

Montage of transverse lag.

The next stage of the installation of the fence is the installation of transverse lag. This is done with welding, clamps, bolted compounds. Electric welding the most operational reliable way. Lags are set in parallel one other and the founding of the structure. For a fence with a height of less than 1.7 m, 2 lags are required if the height is greater, it will be necessary to put 3 lags.

Created design is a framework. Everything is painted with anti-corrosion paint. Special attention is paid to places of welding to warn corrosion.

In addition to welding, it is allowed to apply:

Staples, clamps for pairing lag with supports.
The brackets allow you to fix the lags to the post (on the front of the jack, overlays, holders, side support).

Installation of professional flooring

Fifth stage - fastening sheets of professional flooring to transverse straps with screws. Docking of the canvas usually produced a mustache.

Important! One edge of the sheet should have a complete wave, the second is not complete. The junction is performed only in one direction. This moment is important if the marking of the sheet and its cutting is made gradually as edited. The place of the junction is to fasten the rivets.

Self-tapping screws into the bottom facial wave:

the weak twisting of the screws will cause the flow.
too much twisted tapping screw causes deformation of the gasket, destroy the metal coating.
the crookedly supplied screw will break the metal, will cause a loose fit of the gasket, it threatens premature corrosion.

It is properly screwed up at an angle of 90 degrees to evenly press the gasket without touching the metal surface. Bold the screws is allowed to each third wave.

Completion of mounting work

The completion of construction will be the installation of a P-shaped plank on top of the fence. An optional element, but creating a smooth edge. The bar is fixed by the clips.

Some features of the installation of the fence from the professional flooring

Uneven sections or bright soils require special techniques.

Busty soil

This aspect takes into account those who want to establish sectional or combined fences with heavy stone pillars. Danger represents sandy, loam. In other words, the land holding moisture during freezing has the effect of bubbishness. The soil rises sharply during freezing. The foundation behaves like plasticine.

It is possible to solve the problem in a different way:

Full removal of soil to the depths of the freezing and its replacement on the sand. The soil around the foundation is also deleted.
Installation of the foundation below the waterproof point. But the pressure of the dumping will remain on the walls of the base.
Light designs can be installed if you insulate the foundation with a special material. The insulation is placed on a width equal to the depth of freezing.
A good access is drainage. It is a trench of a depth of equal depth of the foundation. The bottom of the trenches should be equipped with a pipeline wrapped with filtering material. The trench is digging at a distance of 30-50 cm from the foundation. Ready drainage fall asleep with rubble.

Uneven plots

If it is too expensive to align the site, you can put the fence on uneven ground. The territory with sharp slopes can be distressed with sectional or combined fences, which will perfectly fit into the relief. It is necessary to calculate the height and width of each span. Aesthetics will provide a foundation of a stepped type.

On the slope less than 35 degrees is allowed to make the width of a 2.5 meter width. With an uneven slope, you can make a fence from the spans of different lengths. An increase in the slope requires a decrease in the length of the section. In uneven areas it is better to install fences on a tape base.

The connection of sheets at an angle should be closed by corner straps that are obtained on bending equipment.
Working with professional flooring requires the use of working mittens, since the material has sharp edges.
Cutting sheets is performed by metal scissors. The edges need to be painted paint. It is impossible to use the grinder, it destroys decorative coating.

Features of care

It is almost no need to care for the fence from the corrugated flooring with a polymer anti-corrosion coating. The polymer serves excellent protection. Burning along the road can be damaged by stones, gravel. Places of damage must be periodically painted.

Watch the video! How to make a fence from the corrugated hand

Did you like the article? Share it

Print article