Quaril baths disadvantages. Quaril baths: advantages and disadvantages of modern material

They were made from cast iron, steel, and later acrylic products began to be sold. Quaril baths are now produced. Product reviews indicate that such containers are reliable and beautiful. Their features are described in the article.

Concept

To get acquainted with the features of the product, you should highlight the pros and cons. What is a quaryl bath? Kvaril is new material, which is used to create bathtubs and shower trays. It is a mix of sand and acrylic.

The structure of the material is as follows: a particle of quartz (a grain of sand) is located in a round acrylic shell, and between them there is acrylic and auxiliary impurities. Sand is used for better rigidity of the product, acrylic for elasticity, and impurities affect the color and texture of the product.

Advantages

According to reviews, kvarilovye baths have their pros and cons. Among the advantages are:

Light weight. I cooked heavier than acrylic, but it is much lighter than cast iron and steel. This product is easy to lift and move to the desired location.
Excellent thermal conductivity. The product heats up quickly and maintains a pleasant temperature for a long time. The water cools down slowly, so there is no need to regularly add hot water.
Resistant to chemical cleaners. Bathtubs do not react even to strong chemical detergents.
Rich assortment of shapes and colors.
Long service life and UV resistance.
Resistant to damage. Kvaril is similar in characteristics natural stone... The material is durable, it does not break. It is also difficult to put a scratch on it.
The surface has no roughness, but it is not slippery.
The anti-corrosive and anti-bacterial action is much better than any other material.
Easy to install. Installation can be done without experience and skills. No brick battens or pillows are needed. It is required to install the product on the legs. The structure is level-regulated and connected to the water supply and sewerage system.
Ease of maintenance. Dirt and grease do not adhere to the surface of the material.
High quality sound insulation... The surface absorbs the sound of flowing water.

Today, such products are only becoming popular, but still they have a lot positive feedback... Buyers like appearance and excellent performance properties of the goods.

disadvantages

According to reviews, the quaril bath also has disadvantages:

High price. In comparison with cast iron, steel, acrylic, this product costs more.
Limited choice due to manufacturing features. Although there is a variety of colors, shapes, sizes, baths are created by casting in finished forms.
The uniqueness of the design. In the case of quaril, this criterion is negative. Only baths and shower trays are made of quaril, so it is difficult to find a toilet and a sink for them.
Although the products are unpretentious to maintain, it is advisable not to use aggressive detergents containing abrasive substances. There is a risk of damage to the container.
The material deteriorates from high temperatures, therefore, with frequent use of boiling water, the product is deformed.

These are all the disadvantages of a quaril bath that should be considered when buying. According to customer reviews, many are still satisfied with such products.

Specifications

The height of the bathtub is 65-70 cm, so it is suitable for an adult and a child. At a depth of 50-60 cm, you will be able to comfortably keep your head above the water. The length can be in the range of 150-180 cm. To make bathing comfortable, a special side is provided for the head.

Models are often produced with dimensions 170 × 70 cm, 180 × 80, 170 × 75. According to reviews, quaril baths have different modifications with different designs and parameters. These advantages pay off the high price of the product. At the request of customers, bathtubs can be equipped with support handles, legs, anti-slip coating, hydro or air massage system. The products have high functionality, so there is a constant demand for them.

Installation nuances

Usually, quaril baths do not have an overflow hole, and sometimes a drain hole. This is done deliberately so that the master independently chooses the best way connection to the sewerage system.

It is better to entrust the installation of a quaril bath to specialists, but you can still do the work yourself. All holes are drilled with a diamond bit of the required diameter. If it is necessary to embed handrails or install mixers, then use the same drilling method. Bathtubs do not need auxiliary support during installation. The frame in this case is a decoration.

Installation

Built-in models have support feet. If you twist them, it will turn out to correct the height of the product. The installation procedure differs little from the installation of acrylic and:

The structure must be placed on a clean base.
The building (water) level is used to level the upper plane of the container in a horizontal position.
Taps are installed to supply cold and hot water.
Plastic adapters fix the drain-overflow and connect the bath to the sewer pipe.
The connection must be checked for leaks - water is added to the bath and left for several hours. If there is a leak, it is required to eliminate the defect.
The front of the bath can be covered with a decorative panel or tiled.

This completes the installation procedure. If everything is done correctly, then the service life will be long. According to reviews, quaril baths are easy to clean. But in order for the structure to serve for many years, it is necessary to follow the manufacturer's recommendations.

If it crashed - what to do?

The surface of the material is durable, so it is difficult to damage it. But after a few years, in the absence of proper care, restoration is needed. If cracks, chips have appeared on the surface, then the damage can be removed with your own hands.

According to customer reviews, a quaril bath after restoration can serve for many more years. The type of repair is determined by the type of damage:

Polishing. It is performed when streaks, yellowness, scuffs, scratches appear. The procedure is carried out using 3 types of polish: silver (removes stains), abrasive (removes scratches) and wax (makes the product glossy).
Application of a reducing agent. It is used when cracks and chips occur. The reducing agent mixture is sold in hardware and plumbing stores. Before processing, the container must be thoroughly washed and dried.
Restoration. It is used when a product is punched through. Since the kvaril hardly breaks through, the authenticity of the product should be checked if damaged. If the structure is broken, it is necessary to restore its outer layer. For this, a reinforcing kit is used. This work must be done by professional masters. After reinforcement, the bathing container is covered with a reducing agent mixture. It should dry out.

On sale you can find sets, thanks to which it will turn out to fix a quartz bath. Any kind of repair can be done independently.

Care

Quaril material is resistant to household chemicals... But this does not mean that aggressive cleaning agents can be used for cleaning. Creamy cleaners do this without harming the plumbing. For maintenance, you need to rinse the bath several times a week with non-abrasive cleaning agents. The resulting plaque and scale are removed by using table vinegar or special substances. The assortment of the latter is rich, and therefore everyone can easily choose the appropriate option.

Regular care of the kvarilovy bathroom is required. After each bathing, rinse it with warm water and wipe it off with a soft material. These procedures significantly extend the life of the bathroom and protect against the occurrence of negative consequences.

Do not use hard brushes. They spoil upper layer material, moreover, are useless. On a smooth quare, dirt does not linger well, and therefore, to remove it, a soft cloth or sponge will do.

Manufacturers

Quaril baths from Villeroy & Boch are now in demand. It is this German firm has created a technology for the production of kvaril. The new direction appeared several years ago, and now the supply is made to 100 countries of the world.

The price of such products is 50-100 thousand rubles, depending on the variety. But with proper handling and care, such a bath can last for many years. And if defects appear on it, then they can be easily eliminated on their own.

Oberon kvarilny baths can be with aero- and hydraulic systems. Hydromassage water jets provide a relaxing effect. A feature of the brand's products is the coating with antiseptic enamel enriched with silver ions. In obtaining a special type of coating, Activecare technology is used.

Products of this brand are of excellent quality, as evidenced by numerous customer reviews. The products are guaranteed for 10 years. Russian manufacturers do not produce a worthy alternative to the German company. According to customer reviews, the products of this brand retain their appearance even over the years. The shine does not fade and cleaning is easy.

Users are pleased with the surface that heats up quickly to the desired temperature. Original design like all buyers. Almost all models have hydro and air massage. The owners of such a product speak of visual appeal, as well as ease of use. There are single and double baths on sale.

But there are also negative reviews. Many are dissatisfied with the high price of baths, and this is due to the high quality of the products. Not everyone can install them on their own, you have to contact the professionals.

Output

Thus, in general, the owners of kvaril baths confirm their attractive appearance, practicality and convenience. The products are also distinguished by their durability. Kvaril has become a popular material today.

Many of us are well aware of acrylic bathtubs.

A Quaril baths are a logical continuation of improvements designed to negate significant disadvantages acrylic baths- susceptibility to scratches and the need to install a power frame.

So what is kvaril? This is a modern material that has replaced the well-proven acrylic, significantly increasing the resistance of products to mechanical damage.

Kvaril consists of quartz sand and acrylic, making it more durable.

Modern baths made of quaril are heavier than acrylic ones due to strengthening additives, but lighter than cast iron ones. The wall thickness of the product is about 10 mm, which makes it possible to create durable bathtubs for frameless installation.

Otherwise, they inherited all the advantages of their predecessor:

relatively light weight;
low thermal conductivity;
exquisite appearance;
the ability to give any shape.

For reference: the microstructure of quaril is a grain of quartz sand enclosed in a round acrylic capsule, and the space between these capsules is also filled with acrylic.

Quaril baths are made by casting into a specially prepared mold.

Features of modern material

Unlike those that cannot be operated without a steel frame, products from a quaril allow you to create both frame models and frameless ones.

This is achieved by increasing the thickness of the walls and base, resulting in a quaril bathtub that looks like modern cast iron.

It should be remembered that quaril products are heavier than acrylic ones, but lighter than cast iron.

Thanks to the casting technology, quaril baths can boast:

geometrically regular shapes, while acrylic products are available only with rounded corners;
high strength, because it is almost impossible to damage the quaril baths. Even if you drop a heavy object, cracks or scratches will not appear on the surface;
excellent acoustics: the sound from water falling on the surface of a quaril bathtub is juicy and muffled, while the sound from water on the surface of acrylic is harsh and emits emptiness.

Installation of frame and frameless baths from kvaril

The installation technology is also different - quaril baths, in contrast to, allow installation in a room without a power frame.

Quaril models (built-in) designed for standard apartments, equipped with special legs, and the installation itself is similar to the installation of steel baths:

due to the adjustable base (legs), the bath is installed in a horizontal position;
the drain is connected to the sewerage system;
hot and cold water taps are installed;
the sidewalls are closed with plywood sheets (for finishing with tiles) or plastic panels ();
wall tiles are laid on the edges of the bathroom.

There are interesting features installations modern bath from kvaril, in particular:

Quaril bathtub does not have an overflow hole, and some models do not have a drain hole. This was done on purpose in order to choose the most convenient option for connecting to the sewage system already at the installation site;
kvarilovye baths allow the installation of hot and cold water taps (mixers) in one of the sides. This is convenient when installing in small spaces because gives more room for maneuver with the choice of the location of the bath;
more precise geometric shapes of the bathtub, as well as its strength, allow to achieve a minimum seam between the edge of the bathtub and the tiles when covering.

It is clear that it is best to entrust the connection of built-in models to specialists who have everything necessary tools for drilling a quaril.

If we are talking about freestanding bathtubs made of modern material with existing technological holes, you can install them yourself.

The installation of such a product is quite simple:

we install the base under the bathroom bowl;
using the level, we set the required height, guided by the location of the taps with hot and cold water and the sewer drain;
we install a quartz bathroom on the base of the podium;
we connect the bathtub to the sewer pipe using the plastic adapters from the kit;
install and connect taps;
we check for leaks, for which we collect a bath of water;
we drain the water and fix the side panels of the podium;
install the front panel of the decorative podium.

Conclusions: bathtubs made of modern quarila material are more practical and functional than acrylic ones. They are also superior cast iron baths due to the plasticity of the shape and the possibility of casting more refined shapes. A number of models are available in a frameless base, allowing easy installation.

Among the wide variety of baths, there are some that stand out from the rest. Such baths are made of quaril, which has its own certain disadvantages and advantages, and the acrylic and quaril baths differ significantly from each other, and there is a significant difference between them.

A kvarilovaya bathroom, like any other plumbing, has certain advantages and disadvantages.

First of all, it is worth noting the advantages, of which there are quite a few:

Aesthetics. The material is smooth, homogeneous and completely free of roughness.
Flawless whiteness and gloss.
Light weight. Baths, for which such material as acrylic is used, are lighter than quaril ones, but against the background of the others, the quaril structure is the lightest.
The product has high rigidity. To install a solid quaril bath, you do not need to install an additional rigid frame.
The design has excellent impact resistance. Even the strongest mechanical impact is absolutely not scary to the bathroom.
The bath has excellent sound insulation, which is ensured by the presence of acrylic fiber in the polymer structure of the quaril.
The product has low thermal conductivity. In such a container, the water will slowly cool down, and it will be possible to take water procedures with maximum comfort.
Long service life. Due to its strength and durability, the equipment will last a long time and will not cause problems.

Disadvantages are also worth paying attention to, and quaril baths have one single negative quality. And that's the cost. To be more precise, the product will be much cheaper than a natural stone bath.

However, among the models made of steel, cast iron and acrylic, the quartz product will be the most expensive.

This is due to the fact that the manufacture of the structure requires the use of modern technologies.

In order not to be disappointed in the money spent and not to face such problems as the formation of defects after installing the quaril bath, you need to buy only the product that has certain certificates for compliance with GOST and SNIP standards.

In addition, there must be a document confirming the use of quality materials, so that later, when using water high temperature or if a heavy object falls to the bottom of the container, there is no deformation in the form of a dent.

There is one more drawback, but not a significant one. It consists in the fact that only baths and some elements for shower cabins are made from quaril, and therefore it is almost impossible to assemble a single composition from a bath, sink and toilet bowl.

Kvaril bath types

Kvaril is a plastic material and therefore manufacturers have the opportunity to make bathtubs of various shapes, from traditional to unrealistically creative, made according to a specific design development.

Basically, you can find a bath on sale:

Rectangular;
Round;
Oval;
Corner;
With beveled sides;
Hexagonal.

In addition, the kvaril bathtub can be built-in and freestanding.

Most often, they use built-in plumbing equipment, since such products are suitable for compact rooms, which, most often, can be found in multi-storey apartments panel houses Khrushchev type.

Separately standing structures used for more spacious rooms, as well as for a certain design solution.

First, the legs are installed, then the bowl is installed, and the connection is made.

In general, quarian baths of any kind are special in that they have no overflow or drain hole. They are made independently after purchasing the equipment, and you can do it yourself using a diamond-coated bit.

We figure out what kvaril is

What is kvaril?

This is the material from which bathtubs of such models are made as:

Villeroy;
Boch;
Oberon;
Quaryl.

In particular, for the manufacture of these structures, a synthetic material is used, created by combining quartz sand and acrylic. It has a dense structure, and quartz particles are enveloped in a plastic shell. The void between such particles is filled with acrylic.

Quaril products have the advantages of acrylic bathtubs, in particular, plasticity, aesthetics and attractiveness.

The presence of quartz sand in the material contributes to an increase in strength, durability and wear resistance.

Kvaril was founded several years ago in Germany. The creator is Villeroy & Bosch. It was originally used for processes such as restoring and refurbishing acrylic bathtubs that have lost their proper appearance or are cracked.

After the bath was made from quaril, numerous tests were carried out and it was proved that they can be an innovation in the manufacture of sanitary equipment, they were made all over the world.

The production of kvaril baths is carried out by casting the material into a special mold. The products are varnished, which gives the container an incredible glossy shine, but the surface of the bowl remains non-slippery, which is especially important for a child or elderly person.

What reviews does a bath from kvaril have?

Due to the fact that this is a novelty in the field of plumbing equipment, besides, it is quite expensive, there are reviews about the products, but not in a large number.

Quaril baths:

Expensive;
They began to be manufactured relatively recently;
Have only positive reviews.

In particular, those who have had a chance to try a quaril bath, note that the operation process does not cause problems, but only comfort, pleasure and maximum pleasure.

A pleasant-to-touch surface, an instantly heating bath, and most importantly - long-term preservation of heat, this is what you need for water procedures. Stylish European baths, created using modern technologies, can amaze anyone, and will fully meet the expectations and the money spent on them.

In addition, it is worth noting that quaril bathtubs have an original look, you can choose models in shape, size, decor and other parameters.

Modern manufacturers are constantly improving the produced kvaril baths so that consumers can only get real pleasure, and also do not complain about high prices.

The most important thing is not to be led by those who offer supposedly high-quality quaryl baths at a cheap cost. In fact, such plumbing equipment should be purchased only at specialized points of sale, where everyone can provide Required documents which can confirm the European quality.

Varieties of quaril baths (video)

Experts in statistical research in the field of plumbing equipment sales believe that quaril baths have already occupied their definite niche in the product group and will soon become the most demanded products.

For a long time, the now very popular acrylic bathtub has not been a curiosity. Striving for the development and improvement of modern technologies that make it possible to level some of the disadvantages of acrylic bathtubs, steel products from kvaril. This is how quarian baths appeared, unlike their acrylic predecessors, they do not need to be installed on the frame and are more resistant to damage.

Quaryl was obtained by mixing natural material- quartz flour and acrylic. It turned out to be more durable and durable, but with all this - unpretentious in maintenance. The structure of the material can be thought of as a multitude of acrylic capsules with sand inside. And the space between the capsules is also filled with acrylic. This is an excellent material for baths, an innovative development of a new generation. Quaril bathtubs are an elite product, the popularity of which is growing.

In addition to the material itself, the technologies for the production of such baths are also interesting. Manufacturing takes place not by vacuum forming, but by casting into a mold, which makes it possible to obtain products of any shape. Casting provides great creative freedom. The unique properties of the material allow you to embody many design ideas: forms that cannot be created from other materials, kvaril accepts with ease!

There is no connecting seam in the quaril bath. The bath bowl has a small wall thickness - up to 2 cm, however, its body is incredibly strong. Therefore, the design can be frameless. Due to the increase in the thickness of the walls and base, individual collections of bathtubs can have a frame, but these are quite rare cases.

Among the features of such products is greater weight in comparison with acrylic models. But in general, these are quite light baths, although outwardly such models look like solid cast-iron ones. Among the important advantages is low thermal conductivity, due to which the walls will not heat up much, and the heat of the water will remain in the container.

Nowadays, acrylic sanitary ware is in great demand in the markets. Consumers are already accustomed to the fact that acrylic is easy and docile in molding. But kvaril has not yet managed to get the same recognition as acrylic, and it is completely in vain.

Quaril baths - how to choose

Quaril is essentially an advanced acrylic and is a mixture of quartz and acrylic. Each of these materials plays a role in the composition. Quartz increases the rigidity of the piece, while acrylic gives it flexibility.

The color and structure of products is determined by additional impurities that are present in the composition of this material. And also, thanks to them, all positive traits acrylic, which is part of the composite material, gives products shine, elasticity and rich, smooth color.

Quaril also contains acrylic resins, which make up more than half of the total mass of the material. It is they who, during processing, determine the flexibility and plasticity. Initially, kvaril was intended for restoration, but over time he managed to almost completely replace acrylic and surpass it in characteristics. This newly developed material is used in the manufacture of bathtubs and shower trays.

The combination of these two materials has a high shockproof quality and resistance to mechanical damage. For example, if a heavy object falls into the tub, no damage will be left on it.

They do not require the installation of support frames, since the wall thickness is approximately 10 mm, and the bottom thickness can reach 25 mm. Thus, they are made with a frame and made frameless.

Due to additives that strengthen the material, bathtubs made of it are heavier than acrylic, but much lighter than cast iron. They are made by casting into special molds and, thanks to this technology, products from quaryl can also be with right angles, which makes it possible to save space, ideally fitting into the space allotted for them.

The production of acrylic bathtubs allows them to be cast only with rounded edges. Quaril models have good sound insulation, and the sound of water pouring into them is practically inaudible. The surfaces of the quaril models have a perfect homogeneous, without the slightest defects, coating, but with all these qualities, it is absolutely not slippery.

Kvarilovye baths perfectly retain heat, the water in them cools very slowly. Such products are easy to care for, easy to install, and any cladding material can be used.

The shapes of such products deserve attention. They are produced in the form of a circle, oval, they can be rectangular, angular, with beveled edges, in the shape of a hexagon or with wavy edges. They are also equipped with additional nozzles and other details that allow you to comfortably take a bath.

Thanks to precise casting, all additional parts built into the structure are almost imperceptible, they simply merge with the surface.

But to all the pluses of these products are added their minuses:

The most noticeable disadvantage is their price. Of course, it will cost less than exclusive models, for example, models made of stone or natural wood, but when compared with metal and acrylic products, it is much more expensive.
When compared with acrylic products, quaril baths do not have such a variety of shapes as their acrylic counterparts.
Another disadvantage can be considered the fact that baths and shower trays are mainly produced from this material. Therefore, choosing a set from a sink and a toilet bowl is quite a difficult task.
Quaril products are much stronger than acrylic ones, but not as strong as steel or cast iron.
This material is very poorly tolerated. hot water and so that the product does not deform, when bathing, it is better to immediately adjust the water to a comfortable temperature for the body.

The installation of quartz baths is slightly different from other types of products. Since they have sufficient rigidity and do not need additional reinforcement, the frame in this case can serve as a decorative finish.

The outer part can be closed using a sliding one, where later you can put all sorts of small items. Make the frame cladding with the same tiles as the walls of the room, combining the decor of the room together.

Such structures are installed mainly on legs that can be adjusted. With their help, they give it any position and height. The difference from other such models is the absence of drain and overflow holes in some models.

They are supplied with a cutter with a template for drilling holes. This is due to the fact that during installation, you can choose the most convenient place for its placement. But in order to make such holes, you will need to invite a professional with the skills of such work.

The installation itself is not difficult. First you need to install it on the legs. To do this, use a level to set the tank in the correct position so that there are no distortions. Next, drain and overflow is done in a convenient place and connected to sewer pipes using a thread.

The mixer can be built into the side, which is considered the easiest option and fully meets the requirements modern design... The complexity of faucet installation depends on their model. After all the installation work, testing is carried out. The bath is filled with water and left for a while, and if there were no leaks, then the installation was correct. And if it leaks somewhere, then you need to change or strengthen the gaskets.

Quaril baths are of two types - these are models that are installed separately and, of course, built-in. For small rooms, built-in ones are mainly used, since they can be placed tightly against the wall on any support (legs, frame).

In large rooms, a free-standing model will look better. It can be installed in the center of the room on legs or on a podium, or in any part of the room, according to the chosen design.

How to care for a kvaril bathroom

Buying a new expensive item, you always start to be very sensitive to it. This also applies to kvaril baths. Caring for them is not difficult, but must be properly organized. Now on sale a very large number of all kinds detergents, but each of them has its own purpose.

Long-term use of any item leads to a deterioration in its condition, and too careful care can sometimes just do harm. Kvaril is quite resistant to household chemicals, but this does not mean that such tools should be used often.

Creamy cleaners can easily remove dirt without damaging smooth surface... The smooth and glossy surface of such products excludes cracks and dirt settling.

In order to extend the service life and prevent any unnecessary consequences, you need to make it a rule to regularly take care of the product. After each bath, rinse it with warm running water and wipe it dry with a soft cloth.

In addition to creamy cleaners, sprays have been used successfully. They need to be sprayed evenly over the surface and then rinsed thoroughly with water. It is undesirable to use a spray containing acid, because its contact with metal objects can lead to an irreversible process. Products with acid content are very good at cleaning limescale and scale. Alkaline products will remove rust well.

Disinfectants should not be ruled out either. Disinfection is best done after cleaning, as these compounds are not cleaning products. It is ideal to carry out such a procedure after each use of water procedures, but this is not fundamentally important. Everyone can do such a procedure at their discretion.

Disinfection is carried out in two ways. The first method involves diluting the disinfectant in a filled bathtub with room temperature water, holding this mixture for 10 minutes and draining it all. Then rinse the surface well with running water to avoid getting the antiseptic on the skin. In the second method, the antiseptic is applied directly to the surface, kept according to the instructions and also washed off with running water.

Whirlpool baths require more careful maintenance. Despite the built-in contamination protection systems, deposits can form on the nozzles. The hot tub's main enemy is hard tap water. When washing such structures, each nozzle is removed and washed separately with soft non-abrasive agents, which are diluted in a large amount of water.

As in other cases, folk remedies here will not be superfluous.

To remove limescale, dissolve a pack of citric acid in a bath with enough hot water leave for a couple of hours and rinse with water. In addition to the fact that it will cleanse of plaque, it will also make it shiny for a long time.
Toothpaste will cope well with any stains and dirt, because it copes well with tooth enamel.
Baking soda and soap, applied for 15-20 minutes, will help to cope well with rust. This must be done very carefully, because the soda is abrasive and if you overdo it, you can get matte stains as a result.
Ammonia, salt, vinegar - all this will help to cope with pollution without using chemistry.

If, nevertheless, a decision is made to purchase a quartz bath, then you need to take into account that the price will depend on the quality. It is better to choose products from reputable manufacturers who value their reputation. Now the production of models from quaryl has not yet been put on stream, and the production is carried out as single items.

Can be done individual order and get an absolutely unique model in design, shape and color. Depending on the configuration and features, they will cost from 60 tr. up to RUB 600,000

At the moment, German manufacturers represent quarian sanitary ware, but it is still expected to reduce prices due to filling the market with this product. Despite the fact that such products are considered a novelty, they are already seriously taking their place in the plumbing market.

Due to their rather long service life, such bathtubs can be a decoration for a very long time and look shiny and beautiful.

Did you like the article? Share it

Print article