Finishing with plastic panels: toilet design. How to separate the toilet in the apartment lining the bathroom with plastic panels

Repair is the right thing, but not always pleasant. This is due to financial estates, physical efforts and some other inconveniences. However, everyone will agree that the final result is worth it. In addition, the materials of which are repaired with a major role. Today we will look at decorative finish toilet.

The room is small, but very necessary. It has its own characteristics, among which high humidity inside. This means that the material for finishing must withstand this environment. One of the excellent options are plastic panels.

What is this material special? What is his advantages and shortcomings? How is the toilet finish plastic panels do it yourself? All this we will consider in this article. We will provide step-by-step instructions, as well as see how the toilet finish is performed by plastic video panel lessons.

Features of PVC products

What is good this material? Let's start with the fact that among the set of finishing materials, plastic panels occupy a worthy place. And for the toilet, they are just perfect. Why can I say so? The toilet has its own characteristics. That is why durable moisture-resistant materials are used for his finish. Often buy tiles for this purpose. But, its cost is much higher than the cost of plastic products. The toilet itself is quite small, so it's inconvenient to work with a tile.

Another thing is plastic elements. With almost the same characteristics, they are much cheaper and easier to work with them. Toilet finishing with plastic panels can be made with their own hands. Here are other features of the material that is important to consider:


If we talk about the shortcomings, they are in the insufficient strength of the panels, burning and their property to fade. But, for the toilet, the second factor is not relevant, since it usually in it windows or absent at all, or are made very small. So the sun's rays cannot spoil the material. And with careful use, it will be difficult to damage the surface.

Preparation options for plastic photo panels.

Immediately before performing the walls of the walls, you need to purchase material. How to do it?

Select plastic toilet panels

In order for the works not in vain, and the decoration looked decent and was durable, it is important to properly approach the choice of materials. On the store shelves you can find a variety of products, but how to choose them? Immediately note that the demand gives rise to a sentence. And since the panels are popular, you can get on the unfair manufacturer. It is difficult to define poor-quality goods. What will help in this? Consider several tips.


Thanks to these tips, you can save yourself from the possibility of buying low-quality construction Materials. Right choice Materials are already 50% of the work on the quality finish of the toilet. That's what looks like proper finish walls in the toilet with plastic panels in the photo.

Preparing for the installation of PVC panels

The first stage of work is preparation. If the panels are already purchased, then it is time to take care of other tools and materials. Principle installation PVC Panels reminds finishing with clapboard. Therefore, it will take to create a framework. It can be metallic or wooden. We recommend to refuse from wooden, because the toilet is a wet room, the tree can do and quickly fail.

To create metal carcass required:


In addition, in the work can not do without such tools:

  • screwdriver or drill screwdriver;
  • scissors for metal;
  • kleimers, selflessness or stapler for fixing panels to the frame;
  • special profiles and plinths for plastic;
  • roulette, level, pencil;
  • plastic hacksaw;
  • metal spatula;
  • stationery knife.

When everything is assembled, you can proceed to the preparation of the walls of the toilet.

Cooking walls

Breaking, as they say, do not build. The first task is to remove the old finish from the walls. It pleases the fact that the toilet is small, the poet will not take it a poet. With a spatula, you need to remove the old finish. The work is simple, but requiring time. Then the walls are cleaned of dust and dirt.

Note! In order to make anything prevented you during the work, you should remove everything more superfluous from the toilet.

When the surface is prepared, you can start creating a frame or claw on the wall. Features and plus such a finish method is that in space under the plates you can hide the wiring or insulate the toilet. Consider step-by-step instructions for creating a metal frame.

Mount Metal frame

The main task is to make a frame smooth and correct, so do not do without markup and control the process level. Since the mounting panels will be performed in a vertical position, then the framework is done in a horizontal position. Instructions for creating the following:


That's all, the framework for the walls is ready. Toilet trim with plastic panels (frame stage) with their own hands video.

Installation of plastic panels

Further work consists in using plastic moldings. What are they needed for? PVC planks need to be inserted into the appropriate grooves, it concerns gender, ceiling and corners. For each case there is its own molding. The photo shows how it is to implement it in practice and which molding is needed in one way or another.


That's all, walls are ready. To make it easier for you, you can view the following information: wall decoration in the toilet with plastic video panels.

This is what the toilet finish looks like by plastic photo panels.

Ceiling decoration with plastic panels

If everything is clear with the walls, then the ceiling turns. It is recommended to separate it with panels too. It will look harmoniously. Moreover, if you have independently learned to finish the walls with panels, then the ceiling will not have problems. Here the principle of work is the same. Everything comes down to the following steps:

  1. Marking on the wall.
  2. Fixation of crates and other elements.
  3. Installing the ceiling molding throughout the perimeter.
  4. Installation of plastic panels.

As for the ceiling, there are nuances here. For example, in the planks you need to make the appropriate holes for lamps. It is better to use the toilet to the toilet spotlights. To do this, there is a markup in the appropriate place, and the hole is cut in the panel using a special crown nozzle for the screwdriver. Work is simple. We have prepared a visual video, how to perform work from start to the end (installation on walls and ceiling). Let it apply to the bath, but the principle of work does not change. Toilet finishing with plastic video panels.

Conclusion

Now your toilet is ready for full functioning. Repair in the toilet is made with minimal money walkers. As you can see, all works are quite simple. If you try, then after 1-2 days the toilet will be ready. Plastic panels are a wonderful material with which it is easy to work, it will last long, and there will be no problems with its operation. The toilet will look like new. And due to the fact that the surface of products is glossy, this visually will increase the small space indoors. With such experience, you can successfully fulfill the finish not only toilet, but also apartments in general. Such skills will be useful in life.

Anton Tsugunov

Reading time: 4 minutes

Put the tile in the bathroom at all homemade Master. That is why many prefer to resort to more simple way To improve this room - to make plastic panels. The main advantage of the designs of this type is an assembly on the principle of the designer, which makes it easily and without loss to disassemble the panel if necessary. Constructive features Such a form of finishes allow oxygen to freely circulate, which is fundamentally important in conditions of high humidity.

Advantages of selecting PVC panels

  • A low price, which varies depending on the quality of the material and the prestige of its manufacturer, but in general remains available.
  • If the installation work is not performed independently, then the wizard services have to be paid much less than for laying ceramic tiles or, for example, natural stone.
  • Resistance to moisture fluctuations. Plastic is not scary water drops, temperature drops, mold, fungi. Even if the material is used in an unheated room, there will be no deformations or loss of paint brightness.
  • Reliable manufacturers guarantee the safety of their products of all properties for a quarter of a century.
  • Unpretentious in use and care. Plastic panels are remarkably laundered from contamination with a soap solution.

There is u plastic finish and several flaws:

  • The installation of plastic panels still decides a little toilet space, which does not happen when painting or pasting with wallpaper.
  • Vinyl is badly combustible, but if it begins to melt, it highlights the caustic, toxic smoke.
  • Choosing a plastic finish from unscrupulous vendors, you can buy a poor-quality product that will be very fragile, breaking.

On the video you can see the repair results in the toilet when it finishes PVC panels:

Examples of toilet repair by plastic panels are presented in the photo below.

The cost of repairing the toilet using plastic panels

If you did not decide that it is better to deal with the renewal of the bathroom yourself or order a turnkey toilet repair service, keep in mind that in Moscow such repairs with plastic panels will cost you at 11-13 thousand rubles, in St. Petersburg - 9-11 thousand rubles. In regions, prices may differ quite significantly.

Select toilet panels

  1. PVC is an incredibly plastic material that bends at an angle of more than 90 °. You can check the quality of the material if you take the panel with your hands from different ends and begin to bend it. High-quality plastic will bend into the ring.
  2. Check out to the material being purchased. You should not understand anything, because high-quality plastic is deprived of any odors.
  3. Threaded panels easier to set up the level, there will be many unnecessary trimming from wide.
  4. All quality products have appropriate certificates. Their absence from the seller must cause suspicion.

Council. When buying PVC panels, always take a small stock into several elements. After all, if in the process of laying it turns out that your primary calculations were erroneous, it may turn out that it is precisely this model that is not available.

Mount plastic panels in the toilet

Toilet cover with your own hands with plastic panels is not a difficult case in the presence of the desire and stock of free time.

Before going to the store, recalculate the area of \u200b\u200bthe future installation, add another 15% for cuts to the resulting digit.

Necessary materials and tools

Before making the installation of plastic panels in the toilet, you need to stock up the useful inventory. You will need:

  • PVC panels, as well as a sealing profile to them;
  • aluminum or plastic profile;
  • hydroelectory;
  • self-tapping screw;
  • shurtpers and drill;
  • cutting tool;
  • drawing tool.

Preliminary work

Before starting the installation of plastic finishes, perform the following steps:

  1. We remove the old finish from the walls.
  2. If possible, change the old wiring and plumbing pipes.
  3. We process the walls with a primer mixture.
  4. If the room is planned to install lockers, shelves, accessories, install additional planks under them.
  5. Material a few hours before the start of work, it is necessary to deposit in the apartment so that its temperature is equal to the temperature indoor.

Installation

The sequence of work will be as follows:

  • Fix plastic or metal guides on the walls.
  • On the ceiling, the crate should be mounted perpendicular to the direction of fastening plastic elements, and on the walls - horizontally.
  • We establish the guides in increments of 0.5 m.
  • Fix profiles.
  • Gently insert the first plastic panel to the P-shaped profile, fix it with self-draws. Some builders are used for fixing a building stapler, but this step is permissible only in the case of installing a wooden crate, which in the toilets is inappropriate.

Traditionally, the finishing of the toilet, in view of the small size of the room, is carried out quickly and does not require significant financial costs. Given the specific specifics of this room used for finishing materials must have good moisture resistance, ease of care, high quality characteristics and aesthetic indicators. After reviewing the varieties of materials, having studied their features and advantages, you can find the optimal solution to the problem, how to separate the toilet, taking into account all the above requirements.

To answer the question than to separate the walls in the toilet, consider the materials used for this purpose. Traditionally apply:

  • plastic or MDF panels;
  • paint;
  • ceramic tiles or mosaic;
  • washable wallpaper;
  • decorative plaster.

Finishing plastic

The finishing of the toilet with plastic panels is one of the most affordable and economical options. Plastic is characterized by good moisture resistance, high strength and ease of care. For the successful installation of the design, it is necessary to initially install the wrap frame around the perimeter of the entire room using screws, strictly by level. Equipment of panels with special locks allows you to securely secure them on the frame without special efforts. To finish the walls, preference is recommended to give more hard material, taking into account the load per capita (when using various hangers and shelves). A variety of color gamut allows you to choose a suitable shade and create a harmonious interior.

On a note! Sheaving MDF panels It is produced by the same principle as PVC material.

Color

The paint finish is also an accessible option for many. The painting process itself is carried out quickly, but it is necessary to take into account that before proceeding to the finishing design, the walls should be perfectly aligned with the help of plaster and putty. Otherwise, any flaws will be immediately noticeable after painting. When choosing a material, preference is better to give special paints on a latex basis, characterized by ease of care, high resistance to moisture and various contaminants. A variety of shades allows you to find the most successful option for the design of a small room.


The time-consuming, but demanded option for finishing the walls of the toilet in the apartment is the use of ceramic tiles or mosaic - durable, reliable, water-resistant, hygienic and easy-to-caring materials. When this option is selected, the need to take into account the need for the ideal reason. Align the walls in two ways - with the help of plaster or clamping cement-chipstones. It is also necessary to consider that heavy tile will not hold onto the walls, so give preference to easier products.

Tile in the toilet - beautiful and practical

To finish the toilet in the apartment there is no need to use expensive materials, mainly they are intended for public premises with severe operating conditions. Before buying, be sure to calculate the consumption of material in the size of your room. Due to the presence of a wide range of tiles with a variety of forms and colors, it will be possible to create an original and stylish interior. For example, a successful solution is a combination of one-photographic ceramic tile with suitable color gamma Mosaic cloth.

Fucking wallpaper

To finish the walls in the toilet room, it is desirable to use washable wallpaper. It is necessary to choose a web resistant to moisture, temperature differences and chemical composition. Vinyl canvas and fiberglass wallpapers are most important to these criteria.


Vinyl is safe and durable material, and the variety of textures will allow you to choose the best option for finishing the toilet. Preference is better to give out foamed or smooth canvases, which will significantly facilitate care for them.

Fiberglass wallpapers are able to resist withstand rigid operating conditions, they are strong, reliable and durable. The finishing process will not cause special difficulties - blowing with glass windows does not require perfectly smooth walls, their surface can be slightly aligned with plaster and processed by a special adhesive composition.

When choosing a color scheme, you should consider the size of the room. If you wish to visually expand the space, choose a light blade with a small pattern, you can use wallpaper with longitudinal or transverse stripes.

Decorative finish

The original design of the walls in the toilet is the decorative plaster, which is a special mixture, thanks to which you can create a beautiful surface with an exquisite relief (see the photo below). Decorative plaster has good vapor permeability, moisture resistance, does not cause the development of fungus during operation, which is important for premises with high humidity. To apply it, it is enough to use the usual spatula.


Wall decoration by Venetian plaster - luxury and nobility of the interior

To disadvantages decorative plaster It is possible to attribute a fairly high cost and the need for preparatory work - alignment of the wall surface.

Finishing the ceiling

After completion of the work on the design of the walls of the room, you can proceed to the ceiling finish. The most common materials used for this purpose are:

  • stretch designs;
  • plasterboard;
  • retooth canvas;
  • plastic panels;
  • plaster.

Stretch structures are an expensive version of the design, but they have aesthetic appearance, have a smooth and smooth surface hiding all the irregularities of the ceiling, do not release toxic substances, differ in resistance to moisture, durability, high temperatures and various contaminants. For successful installation of the design, a frame is built around the perimeter of the room. The film canvate is heated using a heat gun and is securely attached to the frame. When using tissue material, you should have certain skills that allow you to successfully perform the installation.


The suspended plasterboard system is more practical and less expensive compared with the previous option. With the help of drywall, you can successfully hide all irregularities and communications. Finish finish It comes down to painting the surface or pasting with wallpaper. Benefits plasterboard ceiling They are to ensure excellent sound and thermal insulation, aging of temperature differences and ease of care. The installation of the structure implies the installation of special plates to which the plasterboard is mounted, as a result of which the height of the room decreases. To get smooth and smooth surface Requires careful stool processing.

The river canvas is great for decoring the ceiling in any room, regardless of the size of the room. The material is distinguished by stability to various damage, moisture resistance and fire resistance. Installation does not require special skills and preliminary preparation of the foundation, it is enough to install the fastening system and collect the design (note that the fastener installation will reduce the height of the ceiling). Properly selected shades will allow visually to expand the room and create a harmonious interior. The cost of the material is high enough.

Plastic panels - economical and affordable Material To finish the ceiling in the toilet room. Plastic has good moisture resistance, impact resistance, durability, resistant to chemicals, has excellent sound and thermal insulation indicators. Installation of panels does not require special skills and availability special equipment, and a wide variety of shades allows you to find the most successful option. The only drawback of the material is exposure to high temperatures, so when choosing this method Finishes should be taken into account safety rules.


Plastic panels - economical option Ceiling finishes with which you can hide communications and surface irregularities

Plaster is the easiest way to finish the ceiling. This technique allows you to create a fireproof, resistant to temperature differences and moisture, perfectly smooth surface. If desired, the plastered surface can be painted with moisture-resistant paint. It will be perfectly looking for textured or venetian plaster Ceiling. The disadvantage is the impossibility of hiding communications.

Flooring

Floor finish - the final stage repair work. The main criterion when choosing a suitable material for outdoor coating There are good vapor and waterproofing. The floor in the toilet is traditionally laid out the cafeter characterized by simplicity in care, excellent resistance to moisture, hygienicness, high practicality and durability. The tile must necessarily have high strength and sufficient thickness to withstand significant loads.

Taking into account! It is impossible to lay the floor in the toilet with a subtle and fragile material - wall tile, it is fraught with the probability of rapid damage to the coating.

The stacking process requires considerable physical and time costs, but the result will be sure to please. For the premises of a small area, it is better to choose a tile of light shades, it will allow you to visually expand the space. Using a tile with a pattern and interesting ornament, you can create a unique and original interior.

Presented toilet finishing options have their own characteristics, but the main criteria when choosing a material should serve personal preferences and financial capabilities.

The modern finishing materials market offers many practical solutions For finishing the bathrooms. More recently, those who were going to make repairs in the toilet were only two options - painting of walls or facing tile. Now you can choose immediately from several available options, each of which has its advantages and disadvantages.

In today's article, we would like to tell you about one of the easiest and most convenient ways of finishing the walls and the ceiling in the bathroom - plastic panels. You will learn about the features of this finishing material, On the basic principles of working with it, as well as how to choose the right plastic panels in the toilet.

pros

To begin with, we consider positive sides The use of plastic panels as a finishing material for the bathroom. The list of advantages of these products is quite impressive:

  • Low price. This method of finishing surfaces is one of the most low-cost. It will be cheaper except that painting with water-emulsion.
  • Easy installation. Plastic panels do not require special skills in the sphere of repair. Even one who took up repair for the first time can cope with their installation.
  • Speed \u200b\u200binstallation. Installation of one panel of PVC takes a few minutes. Since the bathrooms usually have a very small area, all work will take you extremely little time.
  • No need to prepare surfaces. Under the plastic panels do not need to align or stucked the walls.
  • Neutility in care. PVC is a waterproof material that perfectly transfers wet cleaning and contact with various washing agents. Therefore, to maintain the purity of the walls in the toilet will not be difficult.
  • Wear resistance. Despite the fact that plastic is fragile material, if not to expose it to a strong mechanical exposure, the panel of PVC will serve you long enough.

Minuses

However, plastic panels have not only positive sides. Negative qualities of this finishing material are not so much, but still they are present, so it is impossible to silence about them. So, the laptops of PVC panels are:

  • Instability to heating and fire. Plastic panels deformed under the action high temperaturesTherefore, heaters and heated towel rails should not be close to them. In addition, plastic is not a refractory material: it can catch fire from contact with fire. Therefore, with smoking in the toilet, you need to be careful.
  • Large dimensions. At first glance, it seems that plastic panels are absolutely flat, but in fact they can be thick up to 2 cm. In addition, a few more centimeters of space often "eaten" if the walls are indoors are uneven. For large bathrooms, this is not critical, but in small-sized toilets it can become a real problem, as it will not allow to use the tiny area to the maximum.

Article on the topic: Installing corrugations on the toilet

Types of panels

Plastic panels designed to finish the walls and the ceiling in the bathroom, there are several varieties.

Leafy

The most popular view is the leaf panels, which are rectangles from one to one and a half meters long. The thickness of such panels is 0.3-0.6 cm. They can be monophonic, with an ornament or imitation of natural structures - wood or stone. Working with sheet panels is most convenient due to their large dimensions.

Rachet

Rush panels for finishing the bathrooms are used much less frequently.More often they are used for exterior work or large areas of premises. This type of plastic panels is similar to long narrow strips. The length of such panels is from 4.4 to 3.7 meters, and the width is from 12 to 30 cm. Hard panels, imitating wooden timber, especially spectacularly look.

Set of tile

The least common variety of plastic panels is a typeset tile.They are squares of different sizes, which allows you to lay different patterns on the walls and ceilings, like from mosaic. The connection of the elements occurs through the pubs in the panels, and is fastened with all with special glue or cleathmen.

  • If you want to purchase a product with maximum strength, choose plastic panels with a thickness of at least 0.8 cm. In addition, pay attention to the number of "ribs" on inner side - It is they who give extra rigidity.
  • The quality of plastic panels can be determined by it appearance. Carefully look at the front of the product: the paint should be applied evenly, and the drawing, if it is, is printed well.
  • As in the case of wallpaper, the color is the same wall panels And different parties can vary on a few shades. Therefore, buy products only from one party.

The high cost of wall panels does not always talk about as high quality, so the price should not be a determining factor when choosing. However, the material that is much cheaper than its counterparts from other manufacturers is usually made unfair.

Preparation and repair stages

Before starting the toilet finishing with plastic panels, some prerequisites should be conducted. To this stage of repair, you already need to install the toilet, align the floor, lay out it with ceramic tiles or clamping linoleum.

Article on the topic: Automatic gate with remote discovery

Specialists advise prepare the plastic panels to install and further exploitation, processing them with an antiseptic agent. This will protect the material from heat and moisture, so the appearance of fungus and mold can not be afraid.

  • Stage 1. Installing lateral racks that will serve as a base for the frame.
  • Stage 2. Diseases design with rails and crossings.
  • Stage 3. Fastening plastic accessories.
  • Stage 4. Cutting and installing plastic panels.

Basic principles and installation

Consider each of the above-mentioned stages of work in more detail.

  1. Each of the corners of the room should be put on one rack. At the same time, they should not be in contact with the floor and the ceiling, so there are any material between the racks and surfaces. After the design is fixed by screws, the temporary support will need to be removed. It is necessary to put the side racks on a plunder so that they are strictly parallel. Between the fasteners, we observe step 0.3-0.4 meters (we use screws as fasteners).
  2. Side racks are performed wooden bars around the perimeter of the construction from above and below. Fasteners should be screwed at an angle of 45 degrees - so we can securely fix two rails at once. Next, the rails need to be fixed on the walls using self-tapping screws. This is the main framework, which, if necessary, can be supplemented with side racks or transverse rails. The step between the frame elements should be about 0.5 meters.
  3. Plastic accessories nail to the frame using nails and a hammer. Fittings need to trim at an angle of 45 degrees - so it will fit the tight. Since PVC panels are quite plastic, fittings are installed, including in the corners. If there is a gap between the rail and the wall, lay it with cutting plastic, then score a nail. Nails for mounting should be selected with large flat hats. In order not to damage the plastic elements, scoring nails, we do the last strikes without a hat, but by a protective nozzle (for example, you can use a nail).
  4. Final stage, with proper installation Frame and fittings, takes quite a bit of time. Plastic panels we cut with a hacksaw. At the same time, the size of each sheet should be on a centimeter-one and a half less than the place prepared for it, since the missing length compensates for plastic fittings. Sliced \u200b\u200bleaf insert into the grooves and secure to the raids. Insert the next sheet into the previous one, then also nail it to cross.

The toilet is the smallest area of \u200b\u200bthe room in the house, and, nevertheless, we want it to be comfortable and looked no worse than the other rooms. We will talk about whether to separate the toilet in the apartment so that his interior is practical and not devoid of originality.
In view of the closeness of this room, its design options are not so much like other rooms in the house. But here it is worth showing your fantasy.
Many types of finish can be performed with their own hands.

Finishing with plastic panels

Plastic covering plastic is the easiest and most cheap type of finish.
There is not such a high humidity factor in the toilet, as in the bathroom, but it is. Therefore, plastic is very suitable material For this room.

  • It is not necessary to mount the panel at the entire height of the wall. The finishing of the standard toilet may look very interesting if you take the material with some fun coloring, and bind the walls only in the middle.
  • The rest of the walls of the walls can be saved with wallpaper, or self-adhesive film, as in the photo. The border between the two materials must be divided by the molding - this will give the walls of the finished look.

The ceiling, in this case, can also be saved by wallpaper. But for this, all surfaces must be perfectly smooth, so it will take careful alignment.
As for the floor, it is, in order to avoid water leaks, it is better to perform hermetically. We will tell about this at the end of the article.

Ceramic tile and mosaic

And yet, reflecting on the question: "How to separate the walls in the toilet?" - The first thing comes to mind is a ceramic tile. This option was and remains the most popular in the decoration of the bathrooms, and it is best suited for the decoration of such a small room as a toilet.
So:

  • Thanks to a huge variety of tiles, both in shape and in color scheme, you can create an interesting and beautiful interior. This contributes to all sorts of decorative elements for such a cladding.

  • Design and decoration toilet roomscan be performed from the usual materials, but with a fantasy. Competently combining the color of the floor and walls, combining various shades and configuration of tiles, diluting the ceramic surface with a mosaic panel.

  • A typical tile mosaic is also good for finishing the toilet, but it is better not to apply it for solid facing - it will simply be rich in the eyes from the Petroy surface. Therefore, the mosaic is combined with other types of materials: with a monophonic ceramic tile or with a tree, as on our example.

Facing with tiles, especially mosaic also requires perfectly even base. It can be performed in two ways: to pre-shock the walls, or to decide their cement-chipstones.

Wallpaper on the walls of the toilet

It would seem that the toilet is not quite a suitable room for such a finish. And, nevertheless, the finishing of the toilet in the apartment can be very interesting.
In addition, there are many types of wallpaper not fearing moisture.

Having smooth walls, everyone can break the wallpaper independently - no instruction is needed here. It is only important to choose such a drawing that can visually expand the space - it can be a light cellular pattern on a dark background, or a large geometric pattern.
It is important that the price of such a finish is quite affordable, unless, of course, it is not necessary to level the walls.

Designer finish

People who are not constrained in the means may well afford to themselves and more expensive interior of this room. The ideas of the finishing of the toilet, like any other room in the house, develops and embodies, invited designer.

  • Options may be the most different. One of them is the use of wall and floor cladding natural stone: marble, granite, onyx, malachite.

  • Toilets that are subjected to such an expensive finish, as a rule, much more spacious similar to the room in typical apartment. Therefore, it becomes possible to create an interior in a certain style, for example - modern.

  • Designers can apply the most different materials: and wallpapers, fabrics, and bamboo or cork coating. Mirrors, accessories, and lamps play a major role in such design.
  • Even the most ordinary materials - tiles and paint, contrastingly selected in colors, can make the toilet original and stylish. Especially if for the expansion of space, a large mirror is installed on the wall, with a beautiful lamp that reflect in it.

Paul in the toilet

Finally, let's tell about how to make the floor in the toilet. His black finish must be made before the start of others finishing work.
It is very important to produce waterproofing the surface of the floor:

  • This is done using a special composition that are sold in the finished form, or in the form of a dry mix that will need to be diluted with water. This mixture is processed by the entire floor, capturing part of the wall of about 15 cm.
  • The angles and joints of the surfaces of the walls and the floor are closed with an insulating ribbon, and then the screed is made. To perform a screed, a self-leveling mixture is used, which is also sold in a dry form - it is very convenient.

After a complete set of tie strength, you can proceed to the ceiling and wall decoration. It is best to put a ceramic tile or linoleum without a foundation, and it is done after the end of other finishing works.
Well, the last place is set to plumbing and other accessories - that's all the finishing of the toilet.

Did you like the article? Share it
Print article
Top