What is the difference between kvaril and acrylic. Quaril baths (48 photos) - a new word in plumbing

The main disadvantage of modern acrylic bathtubs is their flimsy - without a good frame, most products of this type cannot serve for a long time. Over time, under the weight of water, they deform, then cracks appear on them and, as a result, an expensive product is sent to a landfill. Attempts to correct this state of affairs have led to the emergence of such interesting material, as kvaril - this is acrylic with quartz sand, the strength of which is several times higher than the standard acrylic today.? We will get acquainted with their features, advantages and disadvantages, as well as the intricacies of caring for them.

Quaril baths: photo

Quaril baths: what is it0, their design and features

The most significant difference between acrylic and quaril bathtubs lies not only in the features of the material, but also in the method of their manufacture - if acrylic is shaped by hot stamping, then quaril is exclusively a molded product. For this reason, some people confuse it with an acrylic stone, which, in principle, has not gone so far from the quaril. Quaril baths are poured like cast iron, due to which a product is obtained that is fundamentally different from - the thickness of the walls of this product is about 10 mm, which will give them rigidity, strength and allow frameless installation on the legs.

Baths from kvaril photo

In production, these baths are quite expensive - there is currently no mass production of such products. For the most part, they are custom made in small businesses. First, a form is created, into which the material is then cast - then a cycle of surface treatment is carried out, which takes a lot of time. The result is a beautiful, unique product with high technical and operational characteristics. For lovers of video instructions, we attach a small video about the types of quarian baths.

Quaril baths: their advantages and disadvantages

Quaril baths can be safely called the best in all respects - they have practically no drawbacks, unless, of course, the high cost is considered, but there are more than enough advantages, and we will talk about them separately. The advantages of products made from this material include the following.

In general, literally everything in the characteristics of this material speaks of its enormous potential - if low cost could be added to all this, then it could be called ideal. Unfortunately, this does not happen, and any material or product always has drawbacks - in this case, it is a very high cost.

Two types of kvaril baths and the nuances of their installation

Apart from shapes and colors, all modern baths from kvaril can be divided into two types - these are built-in and separately installed. The latter are good for large rooms, but the former are precisely the very products that in most cases are used to equip bathrooms in apartments. It is quite simple to install both types of baths, but these technologies are somewhat different. Let's talk about this in more detail.

All kvarilovy baths are made without an overflow and sometimes a drain hole. On the one hand, this moment somewhat complicates its installation, and on the other hand, it provides some advantages - it makes it possible to make these holes on your own in any convenient place for connection. The holes are easily drilled in the quarile using a diamond-coated bit required diameter... Moreover, in exactly the same way of drilling into a quaril bath, you can independently embed any necessary equipment - and a system of hydromassage nozzles as well.

What is kvaril photo

In principle, this is all, and very little remains to add - in particular, to say a few words about the choice of such baths. These products are quite new, and their choice is very limited - not every company of plumbing equipment for the bath has managed to establish the production of quarian baths. This has its own plus - there are no consumer goods among these products, and almost all products of this type are of high quality. Naturally, it is better to give preference to well-known brands, the quality of which is beyond doubt.

And finally, I would like to say a few words about how to care for quaril baths. In principle, maintenance is quite simple, and if you consider that dirt practically does not settle on them, then we can say that it is elementary. After bathing, you just need to rinse the bathtub with. Now you know the answer to the question, quaril baths: what is it? You can even say more, now you have almost complete information about these plumbing fixtures.

Quaril baths appeared on the plumbing market just a few years ago, thanks to German innovations. But during this time they have gained a reputation for very high quality and durable products, despite the rather considerable price. This is not to say that quaril baths are rapidly and irrevocably replacing cast-iron, steel and acrylic baths, but more and more people prefer to install them.

Cast iron and steel are very tough and very heavy materials. Acrylic is much lighter, but such bathtubs require the installation of an additional frame. But the baths from quaril combined strength and lightness. This was achieved due to the addition of quartz to the acrylic base. At the exit, quartz particles were obtained, sealed in an acrylic shell, and the resulting granules were joined together using the same acrylic and special additives. The manufacturing technology has become somewhat more complicated, but the result has exceeded all expectations. The product turned out to be so strong, wear-resistant and durable that it became a real breakthrough.

Positive traits

Quaril baths are molded in special forms using a unique technology that is not yet available to all plumbing manufacturers. They are mainly made by the Germans, who invented this technology. For what reason it has not yet become quite widespread, it is unknown, but several advantages of quaril baths over products made from other materials may convince that this is not for long.

The first thing that catches your eye is, of course, appearance... Smooth, smooth surface both inside the container and outside.
Quaril baths are many times lighter than their cast iron and steel counterparts. They are somewhat heavier than acrylic, but this is due to the thickness of the walls, due to which strength is achieved.
They do not require the construction of an additional frame.
The service life is much higher than that of acrylic bathtubs.
Soundproofing. Unique property of quartz baths. The composition of the material allows you to drown out the noise of water falling into the tank. Even the strong pressure outside the bathroom is practically inaudible.
Another absolutely unique property is that the surface, with all its smoothness and uniformity, is completely non-slip.
Thermal conductivity. Kvaril does not part with the received heat for a very long time, which allows the bath to maintain a temperature pleasant for human skin for a significant period of time.
Quaril baths do not require any special maintenance. It is enough to wipe them a couple of times a week with a soft cloth or a sponge and soap. It is better not to use products with abrasive impurities, however, as for most surfaces used at home.
Unlike its lighter predecessor, the acrylic bathtub, which was made only with rounded edges, quartz bathtubs can be of any shape, which allows it to be installed in a room of almost any size.
The installation process itself does not require any special knowledge and is performed quite quickly and easily.

Probably, the above advantages are not limited to this list, but this is quite enough to understand that quaril baths are gradually gaining leadership in the plumbing market.

Flaws

And yet, it was not possible to achieve complete perfection. Although the disadvantages that quaril baths have are not so significant, it is necessary to list them.

It may seem strange, but quaryl baths are afraid high temperatures... Long-term exposure to them can lead to deformation of the product. The disadvantage is quite relative, because hardly anyone will pour boiling water into the bathtub.
As mentioned, the use of abrasive cleaners is discouraged. There is a possibility of damage to the surface.
With the increased strength, the appearance of chips and cracks was preserved, although the possibility of their appearance was significantly reduced. In addition, these defects are very easy to correct with a special paste.
Since bathtubs are cast in finished forms, the variety of products is not as great as many would like.
Currently, only bathtubs and shower trays are made from quaril. And if we take into account the previous relative disadvantage, it becomes clear that it is quite problematic to choose a single ensemble, which would also include a toilet bowl, a sink and other plumbing products.
Well, the main drawback is the price. Compared to cast iron, steel and acrylic baths, kvaril baths are much more expensive.

These are all possible disadvantages. Compared to the merits, they are almost invisible.

Installation

When buying a quaril bath, it shouldn't surprise you that some of the models are completely solid. They do not have a water overflow hole, and often there is no drain hole either. This is not a marriage. Manufacturers deliberately do not make these holes during the casting of the baths. First, in this way, the uniqueness of the technology is respected. And secondly, the installation of such baths is possible in any place. The holes themselves are easily drilled on site, but this does not mean that you invite a professional with special equipment will be superfluous.

The second interesting point is that kvaril baths have adjustable legs, allowing you to install it at the desired height and absolutely horizontally. The absence of an additional rigid frame also makes it possible to approach the bathroom decoration with imagination and make it the way you want it.

The installation process itself is as follows:

The container itself is installed on the prepared place and aligned horizontally.
The overflow devices included in the kit are installed in the drilled holes.
The mixer and taps can be installed directly on the side of the bathtub, depending on your wishes.
The tightness test is carried out as follows. The tank is filled with water and the presence of leaks is monitored for several hours. If there are any, and usually they appear with poor-quality installation of the drain and overflow devices, you should either replace the gaskets or walk through this place with a sealant.
Bath decoration can be ordered by specialists, but you can also do it yourself by gluing the sides tiles or other facing material.

Despite the fact that it is possible to adjust the location of the necessary holes right on the spot, before buying, you need to understand well what kind of bath you need and how it will look. This will facilitate both selection and installation.

Care and maintenance

Quaril baths are able to withstand quite large physical influences. However, quite by accident something too heavy may fall into it, and then chips, cracks and other troubles may form. It is not worth leaving this unattended, even if the bath continues to hold water with high quality. Dirt will inevitably get into the crack, which will lead to its expansion. If this happens, it is best to conduct renovation work... V specialized stores a special paste is sold, which should be used to treat the damaged area. The paste is easy to apply and hardens quickly, returning the bath to its original perfection.

For the rest, caring for a kvarilovy bathroom is exactly the same as for any other. Wipe it periodically with a sponge or cloth and soap. This is enough to keep the bath perfectly clean.

Prices

The formation of the price, which for someone may seem somewhat overpriced, is primarily due to the fact that there are not too many manufacturers of quaril baths in the world. Basically, these are German enterprises, which every year expand their assortment and distribution network. However, they do not feel a lot of competition that can lead to a decrease in prices. Therefore, such baths cost from 50 to 100 thousand rubles. On the Internet, you can find offers that are more democratic, but basically these are baths of a standard form and rather dubious quality. So it's not worth chasing cheapness.

That's all there is to say about quaril baths. Undoubtedly, the product deserves attention. Easy to use, durable, durable and stylish. Possessing some undeniable advantages... It will serve your family with dignity and quality for a long time.

Of all the variety of plumbing products on the modern market, acrylic bathtubs long ago acquired a well-deserved popularity among buyers. But another kind of the most important piece of the interior of any bathroom - a quartz bath, still remains a mystery to many. Quaril products are expensive and more difficult to find. Nevertheless, already now they have more and more fans.

The first and most important difference between quarian baths is the properties of the material and the method of manufacturing this type of plumbing. Acrylic products are obtained using the so-called hot stamping, and quaril products - only by casting. This gives reason to consider them made of the same material as acrylic stone, but this is not the case. Anyone who is interested in novelties in the field of construction and repair technologies and plumbing, it is useful to study new information: quaril baths - what it is and what are the features of their installation and operation.

Quaril bath appearance

Such products, like cast iron, are made by casting, and the result is a product that is radically different from acrylic baths. The walls of quarian vessels for bathing procedures are only about 10 millimeters thick. This makes the bathtub more rigid and durable and makes it possible to install such a frameless product on supports.

The mass production of such products is not yet very well established. The production of quartz baths is by no means cheap. Basically, they are made to order at medium-sized factories. The process involves the initial creation of a form, which is subsequently filled with material. Then the coating is processed. This is a rather long stage of the production cycle. The result is beautiful model sanitary ware with excellent quality indicators and excellent operating properties.

Original design quaryl bath

Material

Such baths are made from a special composition, which has received the complex name of polymethyl methacrylate. It is a mixture of acrylic with the smallest round particles of quartz, the spaces between which are filled with acrylic. In addition, each such grain is enclosed in an acrylic shell. It is the quartz component that ensures the high strength and reliability of the bath. It does not require the manufacture of a special reinforced frame.

Kvaril lends itself well to processing. When casting bathtubs with this material, straight, expressive lines can be achieved with the absence of rounded elements. It is kvaril that is ideal for the production of laconic products in a strictly consistent style. Crisp, straight contours contribute to the minimum amount of seams in the bathroom cladding. In addition, the tile looks better.

Quaril bath in the interior of the bathroom

In addition, for a direct bath, it is easier to find a place in the interior of the bathroom, it is more capacious, but allows you to effectively save space. Kvaril looks attractive outwardly, warms up well and does not cool down so quickly. The surface of such products does not generate a lot of noise when a stream of tap water is directed at it. Kvaril is highly durable, so the sides of such a bathtub are made thinner than in acrylic models.

Advantages and disadvantages

The disadvantages of kvarilovyh plumbing fixtures include, perhaps, only their high cost. Otherwise, all the characteristics of such products can be combined into advantages. The advantages of these baths are as follows:

In general, this is an unpretentious, shock-resistant, reliable and safe bathtub. Kvaril, reviews of which you can find only the most positive, is truly unique material, although its cost is very high.

Types of kvaril baths and features of their installation

According to the method of installation, there are two types of kvarilovy baths - those that are installed separately and built-in ones. The first option is perfect for large bathrooms, and the second fits perfectly into the small bathroom of the usual "Khrushchev". The installation of these baths is easy, but the installation methods are slightly different.

Built-in kvarilovy baths, as a rule, have a rectangular shape, but sometimes corner models come across.

Built-in quaril bath model

Installation provides for mounting on legs or on a frame. The outer side surface of the product often remains covered with a special decorative screen or is covered with tiles. In this respect, the appearance of the bath is not much different from steel specimens or cast iron products.

For freestanding quaril baths, beautiful carved legs are most often chosen. Bathtub looks great in the center large room, it is impractical to install it close to the wall.

Freestanding claw foot bathtub

Such an installation does not take much time: the supports are fastened, after which the bath is installed in the selected place in the room. Of course, it is necessary to supply water to the tank, fix the mixer and make a connection to the sewer.

In the production process of kvaril baths, drilling of an overflow hole and drain is not provided. Each owner can do it on their own. In this case, the drain can be installed in the place of the bath, where it will be most convenient. This work is carried out using a diamond core bit of a suitable diameter. In a similar way, you can connect a mixer, a hydromassage system, handrails and other parts to the bath, if necessary.

Bath overflow treatment

Quaril bath parameters

Outwardly, the dimensions of the quaril and acrylic products remain the same, but inside the bowl of the quaril bath is wider, since the durable material allows you to make any shape of the walls and reduce their thickness.

When choosing such samples of plumbing, remember: this is a relatively new product and it is not yet very well represented on the modern market. This is its advantage. The likelihood of purchasing a low-quality product is minimized. Almost all models of kvaril baths are made to last. Of course, it is preferable to choose plumbing renowned manufacturers, then the bath will certainly serve you for a long time.

Quaril baths are an excellent choice for the bathroom and in country house, and in an ordinary apartment... Such plumbing is perfect for any style in the interior. You can choose from different shapes, colors and sizes of baths. Kvarilovy products are highly durable, reliable and retain heat well.

Exterior of the quartz bath Original design of the quail bath Quaril bath in the interior of the bathroom Built-in model of the quaril bath Free-standing bath with legs Treatment of the bath overflow hole Free-standing red quail bath Beautiful quail bath Quail bath with mixer Design of the bathroom with quail bath

They were made from cast iron, steel, and later acrylic products began to be sold. Quaril baths are now produced. Product reviews indicate that such containers are reliable and beautiful. Their features are described in the article.

Concept

To get acquainted with the features of the product, you should highlight the pros and cons. What is a quaryl bath? Kvaril is new material, which is used to create bathtubs and shower trays. It is a mix of sand and acrylic.

The structure of the material is as follows: a particle of quartz (a grain of sand) is located in a round acrylic shell, and between them there is acrylic and auxiliary impurities. Sand is used for better rigidity of the product, acrylic for elasticity, and impurities affect the color and texture of the product.

Advantages

According to reviews, kvarilovye baths have their pros and cons. Among the advantages are:

Light weight. I cooked heavier than acrylic, but it is much lighter than cast iron and steel. This product is easy to lift and move to the desired location.
Excellent thermal conductivity. The product heats up quickly and maintains a pleasant temperature for a long time. The water cools down slowly, so there is no need to regularly add hot water.
Resistant to chemical cleaners. Bathtubs do not react even to strong chemical detergents.
Rich assortment of shapes and colors.
Long service life and UV resistance.
Resistant to damage. Kvaril is similar in characteristics to natural stone. The material is durable, it does not break. It is also difficult to put a scratch on it.
The surface has no roughness, but it is not slippery.
The anti-corrosive and anti-bacterial action is much better than any other material.
Easy to install. Installation can be done without experience and skills. No brick battens or pillows are needed. It is required to install the product on the legs. The structure is level-regulated and connected to the water supply and sewerage system.
Ease of maintenance. Dirt and grease do not adhere to the surface of the material.
High quality sound insulation... The surface absorbs the sound of flowing water.

Today, such products are only becoming popular, but still they have a lot positive feedback... Customers love the look and performance of the products.

Flaws

According to reviews, the quaril bath also has disadvantages:

High price. In comparison with cast iron, steel, acrylic, this product costs more.
Limited choice due to manufacturing characteristics. Although there is a variety of colors, shapes, sizes, baths are created by casting in finished forms.
The uniqueness of the design. In the case of quaril, this criterion is negative. Only baths and shower trays are made of quaril, so it is difficult to find a toilet and a sink for them.
Although the products are unpretentious to maintain, it is advisable not to use aggressive detergents containing abrasive substances. There is a risk of damage to the container.
The material deteriorates from high temperatures, therefore, with frequent use of boiling water, the product is deformed.

These are all the disadvantages of a quaril bath that should be considered when buying. As customer reviews testify, many are still satisfied with such products.

Specifications

The height of the bath is 65-70 cm, so it is suitable for an adult and a child. At a depth of 50-60 cm, you will be able to comfortably keep your head above the water. The length can be in the range of 150-180 cm. To make bathing comfortable, a special side is provided for the head.

Models are often produced with dimensions 170 × 70 cm, 180 × 80, 170 × 75. According to reviews, quarian baths have different modifications with different designs and parameters. These advantages pay off the high price of the product. At the request of customers, bathtubs can be equipped with support handles, legs, anti-slip coating, hydro or air massage system. Products have high functionality, so there is a constant demand for them.

Installation nuances

Usually, quaril baths do not have an overflow hole, and sometimes a drain hole. This is done deliberately so that the master independently chooses the best way connection to the sewerage system.

It is better to entrust the installation of a quaril bath to specialists, but you can still do the work yourself. All holes are drilled with a diamond bit of the required diameter. If it is necessary to cut in handrails or install mixers, then use the same drilling method. Bathtubs do not need auxiliary support during installation. The frame in this case is a decoration.

Installation

Built-in models have support feet. If you twist them, it will turn out to correct the height of the product. The installation procedure differs little from the installation of acrylic and:

The structure must be placed on a clean base.
The building (water) level is used to level the upper plane of the container in a horizontal position.
Taps are installed for supplying cold and hot water.
Plastic adapters fix the drain-overflow and connect the bath to sewer pipe.
The connection must be checked for leaks - water is added to the bath and left for several hours. If there is a leak, it is required to eliminate the defect.
The front of the bathtub can be covered with a decorative panel or decorated with tiles.

This completes the installation procedure. If everything is done correctly, then the service life will be long. According to reviews, quaril baths are easy to clean. But in order for the structure to serve for many years, it is necessary to follow the manufacturer's recommendations.

If it crashed - what to do?

The surface of the material is durable, so it is difficult to damage it. But after a few years, in the absence of proper care, restoration is needed. If cracks, chips have appeared on the surface, then the damage can be removed with your own hands.

According to customer reviews, a quaril bath after restoration can serve for many more years. The type of repair is determined by the type of damage:

Polishing. It is performed when streaks, yellowness, scuffs, scratches appear. The procedure is carried out using 3 types of polish: silver (removes stains), abrasive (removes scratches) and wax (makes the product glossy).
Application of a reducing agent. It is used when cracks and chips occur. The reducing agent mixture is sold in hardware and plumbing stores. Before processing, the container must be thoroughly washed and dried.
Restoration. It is used when a product is punched through. Since the kvaril hardly breaks through, the authenticity of the product should be checked if damaged. If the structure is broken, it is necessary to restore its outer layer. For this, a reinforcing kit is used. This work must be done by professional masters. After reinforcement, the bathing container is covered with a reducing agent mixture. It should dry out.

On sale you can find sets, thanks to which it will turn out to fix a quartz bath. Any kind of repair can be done independently.

Care

Quaril material is resistant to household chemicals. But this does not mean that aggressive cleaning agents can be used for cleaning. Creamy cleaners do this without harming the plumbing. For maintenance, you need to rinse the bath several times a week with non-abrasive cleaning agents. The resulting plaque and scale are removed by using table vinegar or special substances. The assortment of the latter is rich, and therefore everyone can easily choose the appropriate option.

Regular care of the kvarilovy bathroom is required. After each bathing, rinse it with warm water and wipe it off with a soft material. These procedures significantly extend the life of the bathroom and protect against the occurrence of negative consequences.

Do not use hard brushes. They spoil upper layer material, moreover, are useless. On a smooth quare, dirt does not linger well, and therefore, to remove it, a soft cloth or sponge will do.

Manufacturers

Quaril baths from Villeroy & Boch are now in demand. It is this german firm has created a technology for the production of kvaril. The new direction appeared several years ago, and now the supply is made to 100 countries of the world.

The price of such products is 50-100 thousand rubles, depending on the variety. But with proper handling and care, such a bath can last for many years. And if defects appear on it, then they can be easily eliminated on their own.

Oberon kvarilny baths can be with aero- and hydraulic system. Hydromassage water jets provide a relaxing effect. A feature of the brand's products is the coating with antiseptic enamel enriched with silver ions. In obtaining a special type of coating, Activecare technology is used.

Products of this brand are of excellent quality, as evidenced by numerous customer reviews. The products are guaranteed for 10 years. Russian manufacturers do not produce a worthy alternative to the German company. According to customer reviews, the products of this brand retain their appearance even over the years. The shine does not fade and cleaning is easy.

Users are satisfied with the surface that heats up quickly to the desired temperature. All customers like the original design. Almost all models have hydro and air massage. The owners of such a product speak of visual appeal, as well as ease of use. There are single and double baths on sale.

But there are also negative reviews. Many are dissatisfied with the high price of baths, and this is due to the high quality of the products. Not everyone can install them on their own, you have to contact the professionals.

Conclusion

Thus, in general, the owners of kvaril baths confirm their attractive appearance, practicality and convenience. The products are also distinguished by their durability. Kvaril has become a popular material today.

Quaril baths, which were once considered a novelty, are now widely used in the arrangement of bathrooms in private houses and apartments. They act as a kind of logical continuation of improvements that have eliminated all the shortcomings of acrylic sanitary ware.

What is a quaril bath and what advantages and disadvantages it has, we will consider in more detail.

The basis for the manufacture of quartz baths is a synthetic material created by combining acrylic with quartz sand. It has a dense structure in which the smallest particles of quartz are "sealed" in plastic shells, and the voids between them are filled with liquid acrylic.

The quartz bath was able to adopt all the advantages of its acrylic predecessor, in parallel with this, getting rid of many of its shortcomings

The created composite polymer got excellent plasticity and aesthetic appearance from acrylic. The presence of quartz sand makes it strong and durable, and additives give the desired color and texture.

Kvaril, first developed a few years ago by the German company Villeroy & Bosch, was originally used only for the restoration and restoration of the acrylic coating of old bathtubs. Making sure that the novelty can completely replace the acrylic analogue, the manufacturers directed all their efforts to the manufacture of quaril baths.

Quaril baths are produced by casting into special molds. They are covered with a shiny varnish, but at the same time they have a non-slip surface, which is especially important for children and the elderly.

Due to the elasticity and pliability of the material, quartz bathtubs can have a wide variety of geometric shapes, which is especially appreciated by lovers of comfort and adherents of individual design

The presence of hardening additives makes them heavier than acrylic models. The thickness of the walls and base of finished products can be up to 10 cm. This makes them as strong as possible and allows for frameless installation.

Pros and cons of quaril baths

Quaril baths, like plumbing equipment made of any other material, have their pros and cons.

The indisputable advantages of kvaril baths include:

Refined appearance. Smooth, uniform and free of any roughness, the surface shines with a flawless whiteness.
Light weight. They are heavier than acrylic, but much lighter than their steel and even more cast iron counterparts.
The rigidity of the structure. Durable quaril baths with rigid walls do not require an additional reinforcing frame.
Impact resistance. They are not afraid of blows and mechanical damage. An object accidentally dropped into the bowl will not damage the integrity of the surface.
Provide sound absorbing effect. The presence of acrylic in the polymer structure allows you to absorb the sound of pouring water, making it softer and more muted.
Low thermal conductivity. The water in such a bath cools down slowly, maintaining a comfortable temperature for the body. The bath itself, unlike its predecessors, remains warm to the touch.
Long service life. The high strength of the quaril, from which the thick walls of the bath are poured, increases the service life of the product.

Rectangular models are ideal for small bathrooms. It is easy to fit them into the space reserved for the bath, while saving a little space.

Involvement modern technologies in the manufacture of plumbing fixtures, it allows you to create comfortable bathtubs with both oval edges and rectangular shapes

Quaril baths are famous for their ease of installation. The installation can be performed without the involvement of specialists with your own hands, thereby reducing the cost item.

The surface of the quarian baths is resistant to impact detergents... But when processing it, it is unacceptable to use compositions with the inclusion of abrasive elements. In case of scratches and damage to the surface, it can always be restored using special means.

Quaril bath bowls with the same volume are often more spacious than the same models, but made of acrylic

The main disadvantage of kvaril baths is the high cost of products. They will cost less than the same models from natural stone... But in the price range among the acrylic, steel and cast iron baths kvarilovye models occupy the highest positions.

This is due to the fact that the production technology is still new, and the competition in the market is not so great. Some consumers who have installed kvaril plumbing fixtures at home note that with prolonged exposure to high temperatures, the walls of the bath can be slightly deformed.

Among the significant disadvantages of kvarilovy plumbing is its uniqueness. Only bathtubs and shower cabins are made of this polymer. Finding sinks and toilets that are in harmony with them in style is not an easy task.

Versions of popular models

The bath is the most massive element of the interior of the room for receiving water procedures, and therefore attracts attention in the first place. Quaril baths, characterized by excellent aesthetic qualities, will be a worthy addition to the interior, decorated in any style.

The best option is a bathroom, the parameters of the bowl of which provide convenience and comfort for all family members, and the dimensions of the structure occupy only a third of the area of the room.

The shape of the bowl depends only on the size of the free space and your design ideas. The rich assortment of quarian baths provides a lot of room for creativity.

On the market, it will not be difficult to find bowls with the most different forms and sizes starting from compact "one and a half" and ending with spacious "two meters", the width of which is from one meter and more.

View # 1 - freestanding

Free-standing kvaril baths are chosen by owners of large and spacious apartments, installing them in the center of the room.

For a room decorated in classic style, a freestanding bathtub with a traditional rectangular shape is perfect

The white freestanding rectangular bathtub does not need an additional "frame", since its outer walls are already aesthetically pleasing. Such a model can be:

place in the corner of the room;
move to the wall;
install in the center of the room, equipping an impromptu podium for the supply of communications.

Bowls of rounded shapes, outwardly resembling miniature baths and decorative ponds, are perfect for bathrooms decorated in themed styles: sea, Chinese, ethnic ...

For bathrooms in modern style ergonomic models of rounded shapes and unconventional contrasting shades are perfect

View # 2 - rectangular

In the conditions of apartment buildings, the bathrooms in which are not famous for their large area, the most widespread are built-in rectangular models with sizes from 1.5 to 1.7 meters.

Traditional models are designed for an average human build. In them, it is convenient to stretch out to your full height during water procedures, relaxing in warm water after a hard day at work.

Due to the high hardness of the polymer, quarian models of bathtubs allow the use in design of clear lines, devoid of roundness, which are characteristic of conventional bent plastic

On sale there are models equipped with hydromassage systems, including those equipped with hidden nozzles.

View # 3 - corner

If the models of standard dimensions for some reason do not fit into the parameters of a small room, corner baths come to the rescue.

A corner quaril bathtub, which looks like a miniature pool, looks equally good both near the wall and in the middle of the room

The shape of the bowl of such a bath can be:

isosceles triangle with rounded side;
trapezoid with beveled corners;
asymmetric polyhedron.

Due to the non-standard shape of the product, they have a larger bowl volume than rectangular models.

The most popular are corner models with a length of 1.5-1.6 meters. They can be made both left- and right-handed.

The design of a room with a corner bath looks especially presentable if the bowl has lighting, a hydromassage unit and other convenient fixtures.

The main advantage corner models- the convenience of use. In the diagonally placed bowl, you can take any position, while feeling comfortable and not constrained.

Type # 4 - sitz baths

Manufacturers also offer a category of shortened seated models, the dimensions of which do not exceed 1.2-1.4 m. Their main feature is their small format and the presence of a back.

Water procedures in such bowls are taken in a sitting or reclining position, which is very convenient when bathing young children and people with disabilities.

Hip baths usually have a rectangular bowl fitted with a seat. Although there are corner options. V modern designs often sealed doors are provided.

More options for models of quaril baths:

The nuances of installation and connection

Most of the models of quartz baths initially do not have an overflow hole, and some of them even have a drain. This is done by manufacturers so that the master has the opportunity to choose the most convenient option for connecting to the sewer system.

The hole for the drain in the quarile is drilled using a crown of the desired size with a diamond coating applied to it

In the same way, faucets, handrails and other necessary equipment are installed in quartz plumbing. It is better to entrust the performance of this painstaking and responsible work to a professional.

Built-in models are equipped with special support legs, twisting which it is convenient to adjust the height of the structure.

As noted above, quaril baths do not need additional support during installation. The constructed frame in this case performs only decorative functions.

The space under the bathroom is often decorated with a sliding screen, behind the walls of which they place household chemicals or useful little things in the household

The installation technology is not much different from the installation of steel or acrylic models:

The bath is placed on a previously cleaned base.
With the help of an adjustable base, guided by the level, align the upper plane in a horizontal position.
In one of the sides, taps with cold and hot water are mounted.
Using the plastic adapters included in the kit, a drain-overflow device is installed and the bath is connected to the sewer pipe.
Check the tightness of the connections. To do this, fill the container with water and leave it for several hours. Repair leaks if necessary.
The front side of the bathtub is covered with a decorative podium panel or decorated with cladding material.

The precise geometric shapes of the quartz models allow achieving a minimum seam between the edge of the structure and the tile during the cladding process.

The process of installation and connection of the heating bath is clearly shown in the video:

Review of leading manufacturers

The production of quaril baths is a new phenomenon that has not yet become widespread. Among the companies that have mastered the new technology, Villeroy & Boch can rightfully be considered the undisputed leader. A leading German manufacturer, well known in the market for over a quarter of a century, previously specialized in the creation of porcelain and ceramic sanitary ware.

He began to develop a new direction only a few years ago, having established the supply of residential sanitary ware to more than 100 countries around the world.

Today Villeroy & Boch offers a wide range of built-in and free-standing models equipped with many useful functions.

The German kvaril baths presented for sale can be equipped with aero and hydraulic systems. Hydromassage created by the forces of water jets has a relaxing and regenerating effect, restoring well-being and physical fitness.

The main feature of this product brand is a coating of the surface with antiseptic enamel, in the structure of which silver ions are present. The coating is created by adding it to the composite before curing using the Acivecare technology.

The manufacturer gets an ideally smooth and at the same time non-slip surface of the bowls due to the use of new technology Ceramic Plus

The products of this brand are famous for their excellent quality, as evidenced by the great demand for them. All products are guaranteed by the manufacturer for a period of 10 years.

But high quality comes at a price. The cost of sanitary ware ranges from 800 to 5000 euros. Among domestic manufacturers, there is no worthy alternative to the German company Villeroy & Boch yet.

Having opted for a quaril model, you will become the owner of a bathtub that will be more practical than acrylic and surpass steel and cast-iron counterparts in plasticity.

Did you like the article? Share it

Print article