How to close the junction between linoleum and laminate. How to perform a linoleum junction with other floor coverings? Installation of connecting plans

Without curved designer junctions, it's hard to imagine today modern Studio Apartment, spacious living room, workshop or fitness center at home. After all, it is important not only to visually divide the necessary zones, but also to protect a more fragile coating from high passability. For example, the same parquet from the bar rack, or the same massive board from entrance doors. And the straight lines are also always appropriate and look beautiful (not to mention the fact that worries with them - an order of magnitude less), that's just not everywhere and can not always be done by them.

This fashionable phenomenon in the interior design is called the "flowing space". It's when there are no walls, and there are no partitions, and the whole room seems huge and incredibly stylish.

Moreover, many new fashion zones occupy quite a bit of place to somehow separate shelves or plasterboard: galleries, mini-gardens, workshops, home theater, bars and SPA corners. Such open and semi-open spaces with professionally decorated curved joints of floor coverings are the most present future that has already come.

Hyperretive designers or gorgeous fashion?

However, the fashion for curved joints of different floor coverings at one time made a whole whirlwind of new ideas for creative designers, and there was a lot of those with Contractors-performers. What is quite clear: to docile just a tile with a linolyium in a straight line - this is one thing, and it is not difficult at all, but to implement an insane fantasy in the form of hardly no drawing on the floor of flexible profiles is another. Here you need to sit for hours and cut the desired bend on the tile (with the laminate, everything is easier, agree). And only the one who at least once tried to do it knows what matters about. And therefore, even the renovated guru repair with irritation tell about such ideas designers:

"The designer went to the 3D interior program, painted a kitchen with an entrance hall, installed a ceramic tile as an outdoor coating, painted a big oval in it and" hollow "with his laminate. One click mouse. Then the enthusiastic customer dragged this "creation" to the foreman, and he asked the designer: and how to do it? Designer and answered: Well, draw oval and pour it with a laminate. The foreman dresses and leaves. "

Perhaps now we have played you a lot. And indeed, who will want to sit in someone else's apartment and cut on days and clock the same tile when the fee will be paid for completed tasks on the estimate, and not spent time. It is much easier to inform a little aware of the customer that the designer is an eccentric with the letter M, and this curved joint of floor coverings looks only on the monitor screen, and in life it is like a torn brick in the house decor. And then, with such a joint, you will not wrap problems, it looks stupid and much better than an honest rectilinear connection. And that plasterboard also bend - this is the last thing and is generally funny. And in general, such designers are only in the clinic. And even on the construction sites, all this creative need to be exhibited only with a large red crossed cross - they say, so it's not necessary to do.

But, while the masterful guru is trying to stop the rapid development of interior design, contractors are simpler all these design joints and bends make it easy and beautiful - it just needs to spend time. And the result is paid - and everything else depends on skill. And in fact, such joints look neat and beautiful - if a professional did them. And if they were really thought out in advance - the viewing angle, for example, changes much. And today, even in Europe, the joints of the coatings from the hallway in the room do not linearly in the form of a simple threshold, but a semicircle, and it looks amazing.

And no problems like such jokes then do not create: when proper montage They are needed by the same care, as well as all the floor.

How can you connect two different coatings?

For linear joints of different flooring today, classes are used: metal, wooden and flexible. These are not exactly the thresholds that we sometimes secure at the door - they are much more difficult and functional. And the simplest thing is to dock the ceramic tiles of the kitchen and the laminate of the corridor, inserting only one aluminum threshold and consolidating it with self-draws. But the beautiful designer joints are already harder to organize. After all, aesthetics is one thing, but it is necessary that such a bending then did not break, not contaminated and no one stumbled about him.

The quality profile for joints should have such advantages:

Waterproof. This is an important parameter, because The profile covers unprotected coat cuffs.
Color resistance. The profile should not burn under sunlight.
Invisible and fast installation system.
Supplement for cutting into smaller pieces.
The possibility of laying is not uneven floor.
The ability to adapt to coatings that differ in just a couple of millimeters high.
Bending radius up to 30 cm in heated and up to 60 cm in cold condition.
Wear resistance. Profile must have quality appearance So much time as the coatings themselves.

If the coatings are the same height, they are joined in this way:

If - different and so:

Types of modern profiles and thresholds

Such profiles in the modern market are also presented in a rich variety: cheap and expensive, moisture-resistant, durable, multifunctional and different tasks:

Aesthetics, i.e. Performing at the maximum of the most important tasks:

Make the transition between coatings soft and inconspicuous.
Fitness to finish such complex elements as a column.
The possibility of mounting is already on laid outdoor coatings.

Also, the thresholds are divided into types:

Straight. These are used to close the linear joint between different species Outdoor coatings. But they can only be used when both coatings are equally equal.
Aligning. These profiles are used to dock covers of different levels. The main task is to make the transition softer and neat.
Finishing. This kind of profile is needed in cases where some floor covering ends and its curb should be covered.

Here is an example of a direct profile mounting:

Metallic profiles are made under silver, bronze or gold so that they are harmonized with decorative door handles and other details of the interior. Especially good such for offices.

For high wear resistance on metallic profile A powder coating is applied at the factory. And K. Each profile is usually a fastening rail, which screws up with screws straight to the floor. Already - the profile itself.

Aluminum profiles are also available covered with laminated film in the color of wood. These are more resistant to mechanical effects.

But the T-shaped profile from the array is the most expensive for designing designer joints. Usually it is taken for the rectilinear transition of the parquet on the tile, and installed on glue.

But feel about docking profiles from natural tree With extreme caution: in winter, when moisture due to the heating season in the air is noticeably decreased, wooden planks Dry and significantly decrease in size. But by the spring - again gain moisture and increase. Such oscillations significantly reduce the service life of the tree profiles, but if you hang a hygrometer on the wall and you will follow the humidity of the air using different cunning and simple devices, then there will be no such problems. In addition, the normal level of humidity will refuse the beneficial effect on your health.

Flexible PVC profile Before laying you need to soften. To do this, warm water up to 50-70 degrees and leave a profile there for 20 minutes. After that it will be easy to bend and install in the right place. Thus, on a flexible PVC, the profile still in the factory conditions applied notches, according to which it is convenient to be bending with their hands in almost any radius. But the direct profile already notches are not used.

The most functional is the cork profiles, which consist of a layer of cork between thin straps. For example, the same parquet often "plays", and the cork profile will be absorbed as a spring. But such a profile is fixed on a junction with carpet or linoleum - it will not cover the raw edge.

It is impossible to say that some of the types of profiles are worse than another - everyone has its own purpose. And on the examples, we will now everything will be clear.

How is the installation of the profile

Fastening profiles is also closed and open:

Open method: The holes are already made by fastening holes, and the screws are also painted in the same color. In the place of installation drills holes, score a dowel and secure a metal bar. Those. Fastening, if you carefully consider, visible.
Closed method: In this method, the screws hold the bottom profile - the fastening rail, and the facial plank is snapped or sticks to it. Those. The fastening system itself will not be visible.

And the one and that method is good: one maintainability, the second - greater aesthetics.

Different profiles in their form:

It is necessary to install the thresholds with the holes like this:

Cut a profile as you need.
Make marking where you will then drill.
Drill holes and secure the spawns on the self-tapping screw. It will be convenient for you to make a screwdriver or a special screwdriver. Just act carefully that the boards do not get into.

And so fasten the lights with a hidden fastening:

Make marking on the ground.
On the invalid side in the groove of the clad, insert the screws with a dowel.
Drill in the floor of the hole.
Insert the thresholds with dowels in the holes and score to the end. Just score through the bar, so as not to damage.

And finally, the easiest installation of the thoring on a self-adhesive basis:

Make the markup of the future contour and glue the thresholds exactly in the center of the joint.
Remove protective film From the ground and press the profile well - it will stick myself.

It is best to decorate the joint of different floor coverings profile on the zigzag leg. It is necessary to plant it on a special glue, and after laying all materials with force to compress to the desired level.

Each profile has its own fixture for mounting to the floor. If the profile has two paws for fastening, then make it installation simultaneously with the same tile. It will appreciate with its weight and glue one of the paws, and the other will fall under the substrate of the laminate. The installation itself is extremely simple - only is enough to arm a screwdriver and an electric drill. But if you use an aluminum profile and do not want to insert a cork compensator - then take such a spawning that goes with a special rubber insert, like here:

Tile and tree: contact is installed!

The most difficult thing is to competently dock the tile and floor of the tree or wood chips.

So, for trimming winding joints, use cardboard patterns - it is easy to make marking. It is also good for similar coatings to use a cork compensator: a strip of 10 mm wide will calmly be squeezed to 5 mm. Be sure to use it if you are joining the floor in the room where the temperature and humidity differences are quite frequent. It's near S. winter Sadom, pool and sauna, for example.

In addition, when laying wooden profile Be sure to leave compensation gaps. After all, it happens more so that the plank tightly covered the joints of the tile and the parquet, and in the winter you can observe a terrible picture: the plank pops up and deforming, the parquet "gets" to the tile and under the power of pressure even rises her edge! That's where the stories are taken from then how bad and unreliable to do different designs of the floor. Just leave the gap - it will not be visible under the profile, and all the problems are solved!

And note that the floors on the "floating" technology are still shunter than that the coverage is that glued to the floor. Therefore, the compensation clearance for the parquet is left 10-15 mm, but for "floating" floors - all 20 mm. Remember, we leave the same gaps and at the walls - just cover them with plinths. As in this example:

An example of work on docking laminate and tiles:

Butt two types of carpet: not everything is so simple!

The designer joint of two types of carpet also in fashion. It is just important to know exactly how to do it - nothing complicated, believe me! Just remember several rules:

If you are joking two and more species Carpet, then put them so that the fibers are directed equally. This will greatly facilitate your subsequent cleaning.
If you make a joint on a small width, up to 15 cm, then just glue these two pieces with the help of an ordinary PVA and deliver the cargo for several hours.
When the carpet junction is more than 15 cm wide, it is not necessary to press anything - only plinths around the perimeter.
If after the junction of the carpet, you will spend some more work, then cover the entire floor with clean paper. But not the film - she will delay moisture, and the glue will go bubbles.
If your carpet also has holes for pipes, then fix them with colorless tape. Otherwise, with time, carpet in those places will be sucking.
After proceeding the joints, try not to walk around the carpet 24 hours.

If you correctly picked up a profile for connecting the Floor Designer, then no one will turn into and clean and clean the cleaning will not be difficult. In addition, the taste of the selected profile also often serves as a bright visual accent of the interior design.

The junction without profiles is possible!

You can be shown two different floor coverings and without a profile. To do this, use the cork compensator.

Experiment and boldly create the design of the future!

IN modern interior Increasingly, you can find a floor covering consisting of different materials. Such a move allows you to add uniqueness and beauty space, and in some cases, to divide the room into two functional zones. For example, when zoning the kitchen use ceramics, which will allocate the workspace, and linoleum, emphasizing the dining part. In this way, any space can be divided, the main thing is that it seems appropriate and harmoniously.

Materials varieties

To combine the space with the help of two opposite materials, you must use special thresholds. They can be plastic, aluminum, consisting of wood plywood or cork compensator. They are produced in a huge amount, various in appearance, forms and color, which allows each customer to find the perfect option for creating a joint.

If the floor covering is a semicircular, wave-like or other form, then a metal profile will fit well.

With it, you can combine different forms Outdoor materials, including multi-level floors.

The cork base is capable of changing its thickness, narrowing and expanding. By installing the compensator, it is necessary to stick it to deeply so that it can not be noted. Docile ceramics and linoleum is possible without additional fasteners. In this case, you can use only sealant.

Advantages and Disadvantages of Combined Coatings

IN modern apartments Often you can find combined flooring. This method of design allows you to rationally use the unique qualities of each material, since the load on the surface can be very different. Often it is found in the kitchen-living room, and sometimes in the hallway.

The load can be carried out not only at the expense of furniture, but also in contact with water, mud or chemicals. For such areas, it is ideal to use a tile that will add surface strength and resistance to mechanical effects.

The main advantage of linoleum is to give heat, which is important for the dining area.

In addition, it has no so many threats, which is in the working part of the kitchen.

Another plus of combined coatings is to save money. Linoleum and tile have a small cost, in contrast to laminate and natural wood.

With these two materials it is easy to workTherefore, with the task of the association, you can cope with yourself. The colors of the coatings are so diverse that you can easily select suitable tones.

Montaja rules

Any work requires special training, and therefore, starting the connection of tiles and linoleum, it is necessary to adhere to some rules. Without elementary knowledge in the construction area and without the skills of working with tools it will not be possible to create the perfect floor.

When choosing outdoor coatings, it is important to consider them color gamut. They can be one shade, and may be contrasting each other. It all depends on the overall style of the interior and the appointment of materials.

If the floor is planned to be made multi-level, it is necessary to ensure the smoothness of the transition. He must look as much as possible and not to rush into the eyes.

The height should be so as not to deliver discomfort when moving around the room.

Mounted flooring should be carefully monitored. It must be quite reliable and even so that water and garbage will not fall into the gap. Qualitatively done work guarantees semi-heat and sound insulation and waterproofability.

Buying connecting elements, it is important to pay close attention to their quality. If the threshings are selected, then you need to make sure that the fasteners are not visible, and its size is equal to specific requirements. The best option A T-shaped threshold is considered, which reliably combines linoleum and tiles and fits them hard to the surface.

Methods of docking

The linoleum and tile dust can be carried out in several ways, which differ in the complexity of the installation.

Through a clad and profile

Connect two material will help an aluminum threshold. To do this, only you need to attach a connector with finished holes and resolve it to the floor. But if the basis consists of concrete, then you need to measure the fastening locations, make holes, and then strengthen the plate dowel.

You can purchase spawns, which will consist of two planks. One of them must be fixed to the floor surface, and the other top of the coating. In this case, only the bottom plank is mounted, while the top is fixed using a special tool. This method is called hidden, as it allows you to hide the cut.

Ceramic tile Thick the thickness is more linoleum, so when installing them must be equalized.

To do this, you can pour the floor with a solution to lift the draft base. But for this, it is necessary to carefully measured the distance in the place where the linoleum will be located, and pour the solution strictly to a certain level.

There is the easiest method of level alignment - the substrate in the form of a sheet of plywood. To install it, it is necessary to provide a place in advance for fastening the profile.

To simplify the installation of the neck, it is necessary to make a deepening in a sheet, in which one end of the profile will later be inserted, and the second will fix under ceramics. This method is preferable for a beginner.

Profiles can be fixed on the floor through point mounting. That is not to the entire surface, but at a short distance (30-35 cm). If there are irregularities on it, then it is necessary to secure the profile on the floor at a distance of 20 cm.

Adhesive connection

Some believe that the easiest way is to consolidate two different outdoor material with a sealant. However, it is not. To stick the linoleum with a tile, you have to put the coating so that the linoleum is slightly covered with tiles. As soon as both covers are sticking, you need to make a template from cardboard, which will repeat the shape of the joint. This pattern must be put on the linoleum, to break the pencil and carefully remove the surplus.

Similarly, they are also applied to a line of a slice of a linoleum on the tile, after which it is cut smoothly.

To facilitate the work, the sealant is applied slightly not reaching the edges, and after the final trimming it is done. This is especially important if the work is carried out in the corridor under the door.

Regardless of the installation method, the joints still need to be sized. When they are ready to finish, between them you need to apply the adhesive tool and wait until they dry. It is important to do everything carefully so that the glue is not visible on tile. At the end of the work, with the help of the grout, all the seams are grouped and the surface is cleaned.

If the combined option is selected when the floor is selected, it is important that both materials are harmonized with each other and with the surrounding environment. In this way it turns out to create a unique and cozy interior.

Learn more about how to make a jack of tiles and linoleum, you will learn from the following video.

IN ordinary apartment It is necessary to keep laminate 5-7 times. These are transitions from laminate to laminate between rooms. As well as a tile connection with laminate in the bathroom, toilet and hallway.

All these jokes at the door should be made beautiful and monotonous. The thickness and color of floor coverings are taken into account. The easiest way to close the connection is the threshings.

To date, there are more than 10 species. There are even multi-level. This allows you to make beautiful transitions from laminate to thin linoleum and carpet.

And how to keep the laminate between the rooms without a threshold? Experienced finishers are used for this sealant and cork compensators. Let's consider all the options for making laminate transitions. We will understand which one is more beautiful, easier and cheaper.

Methods for docking laminate on the floor

At the seams will be in any case. After all, according to the instructions, it can be treated with one piece on an area of \u200b\u200bno more than 10 meters. That is why the optimal option is to make joints between the rooms.

How to close the seams:

Profiles and thresholds. For docking 2 laminates. Separate under the color of the floor covering. Mixed on the self-tapping screws or glued;
Sealants - as an option to fill the seams between tiles and laminate;
Cork compensator. Thin cork strip painted or lacquered from above. Inserted either sticks between laminate and tiles.

The method of designing joints is desirable to think about the stacking stage. This will allow the wizard to leave the right clearance between outdoor coatings. Each of the options involves its features of the installation.

Types of bellows (profiles) for docking laminate

The connecting threshold does not just closes the seam. It is important to make the transition between floor coverings. If the materials are joined different color - The threshold is selected in the tone of one of them.

Metal.There are steel and brass thresholds on the market. However, most often they are made of aluminum, decorated different ways:

- Laminated aluminum. A thin film from PVC with a relief texture under the tree is tightly glued to the surface of the clad. It does not break when he is sawing, and practically does not scratch. A wide selection of colors allows you to choose a threshold for any laminate;

- Painted. Special powder paints are used, resistant to abrasion and scratches. Decors resembling laminate coloring are used. The appearance of the thoring is preserved with repeated floors;

- Anodized aluminum. These are classes with shades under gold, silver, copper, bronze, and so on. Aluminum profile is placed in a solution of sulfuric acid, after which the electrical current is connected. As a result, the thinnest layer of a particularly durable oxide film is formed on the metal surface.

Fixing features:The product from aluminum is easily poured by the usual pilot for metal. In practice, you can enlarge and carefully break. There are 2 ways to fastening:

Open - in the threshold 4-5 through holes. It is enough to drill the desired number of holes in the floor and insert a dowel in them. After which the threshold is attached to the self-tapping screw. The minus of this method - the screws of the screws are visible on the surface.
Closed - on the back of the profile there is a groove in which the screws of screws are inserted. The holes are drilled in the floor, then we wear the screws with a dowel on the thresholds. After that, carefully hammer the threshold. As a variant of the closed fastening method - gluing a profile to the base of the floor or to the surface of the laminate.

The form differences:

Direct - To keep single-level coatings without drops in height. As a variant of laminate and laminate of the same thickness;
Multi-level - for connecting outdoor coatings of different thickness. For example, laminate with linoleum, carpet or high tiles;
Corner - used when sheeling laminate laminate;
Finishing (edging) - used instead of plinth.

Cost - Aluminum thresholds are the cheapest option to close the shelves of the laminate between the rooms. A standard 90 cm long profile costs about $ 2. If we talk about steel or brass, such a threshold will be 3-4 times more expensive than aluminum.

Wooden.It is usually made from pine and ate, less often use deciduous rocks. Most often lacquered, soaked with different oils or just grind. The thresholds made of wood expensive pleasure. They are mainly used for docking parquet.

In form There are direct, corner and final.

Mounted To the floor with glue, either inserted into plastics mounting plates. The tree is afraid of moisture and temperature drops. Over time, requires updating - grinding, lacquer coating.

MDF.This compressed wood chips, a binder is a synthetic resin. On top of it, decorative paper covered with melamine resin is pasted. Such bellows produce manufacturers of laminate - Berryalloc, Quick-Step and others. That is why the profile can be selected exactly in the color of the floor.

Fastened to the floorlike wooden thresholds for glue or fasteners. At a price of cheaper than natural wood, but more expensive aluminum.

PVC - plastic.The main advantage of plastic is its flexibility. Such bellows are most often used for rounded tiles and laminate junctions in the kitchen. However, close the seams between the rooms is also possible. Despite the flexibility of the plastic profiles are quite strong. They are withstanding significant mechanical loads.

Mount They are on a pre-installed plate installed in the joint, just just on the self-tapping screw. The cost is comparable to the price of aluminum thresholds - $ 2.

Sealant - as an option to dock laminate and tile without thresholds

Usually laminate passes to the tile from the corridor to the toilet, bathroom and hallway. It is in these places it is advisable to use sealants. You do not have to drill the floor, as for the thresholds. However, when placing the joints with sealant there are other features.

Before use, the sealant at the joints is important:

To fit the tile and laminate to each other at one level. That is, both floor coverings must be one thickness. At the same time, there is a smooth gap of 5-6 millimeters;
Printed the edge of the laminate (5-10 centimeters at the junction) to the floor. Pre-cut part. It is necessary for the strength of the future seam. After that we press the glued portion and wait for the drying of the glue.

Of the above, it is clear, using sealants you need to decide in advance. In the store we will with a tile of thickness. And still need elastic glue for gluing the extreme row of the lamellae.

What sealant use? Many recommend pouring the usual silicone into the joint. However, he is short-lived and you will have to update the seams in a couple of years. For joints it is better to use polyurethane sealants for outdoor work. Such will definitely last longer.

Operating procedure:

The edges of both materials are flooded with molar scotch;
The sealant is neatly squeezed into the gap between laminate and tiles. Surplus can be removed even with your finger. But it is better to use a special rubber spatula;
After processing the entire seam, remove the tape from the floor and wait for the sealant drying.

Flexible cork compensator for connecting laminate with tiles

It is a long thin strip from the cortex of a cork tree. The thickness of the compensator is 7-10 mm, the length is selected via the doorway. The upper part of this plank is covered with varnish or paint. You will easily pick up the desired color. The cost of strips from the tube is $ 2-3 per piece.

Mounting method:

Previously, as in the case of a sealant, the edge of the laminate is glued to the base of the floor;
When the laminate grabbed, glue cork compensator. For this, the glue is applied both on the base of the floor and on the slice of laminate. After which the strip is tightly pressed against the skirts;
Now you need to lock the tile from the plug close to the bar. As a result, we have a beautiful junction of 2 floor coatings without a neck.

Some simply insert a piece of cork in the seam. Do not repeat other errors. He will constantly pop up.

However, neatly install the cork compensator is not just a newcomer. Did you like this dock? Show it with experienced finishers.

Remember about the monotonous design of seams of floor coatings. Laminate with laminate throughout the apartment can be shown by the same thorns. And in the places of transitions to the tile use a sealant or compensator.

In the premises of various purposes, various floor coverings are often styled. Due to the fact that their thickness is different, the problem of their high-quality docking is inevitably arise. In particular, the thickness of the linoleum is 3-5 times less than the thickness of the laminate with the substrate. The question arises how to align the height of the linoleum and laminate indoors on the floor.

Is it possible to docile laminate with linoleum? The answer is yes, you can, if necessary. It is necessary to make the docking, taking into account the drops of levels and the use of special thresholds.

How to keep laminate and linoleum in this case?

Most often 2 options for such a dock are used:

Alignment of floors with both types of coating and
The use of special thresholds and linings created for these purposes.

Single butter

There is no doubt that a single-level joint of various sex coatings looks better than the multi-level. Carefully make seams between the laminate and the linoleum will also help the moldings and various linings.

To align the flooring levels from laminate and linoleum under linoleum, the layer of any dense material of the suitable thickness is laid. Most often for this, multilayer plywood is used.

But, even aligning the floors, the junction between the laminate and the linoleum will have to be arranged with a decorative imposition or molding. It will protect the butt from damage. Yes, and from the point of view of design and aesthetics it will be much better.

Multi-level joints

Most often have to deal with docking floors in height. For such cases, bellows are produced, with the help of which the floors with a drop of 1.5 cm can be shown. In addition, they reliably fix the edges of the flooring and closed the joint itself, their design allows you to make a height difference less noticeable. The jokes of linoleum and laminate in this case become neat and even.

Clear and connecting straps

Connecting elements for shakes of floor coatings set. And make them from a wide variety of materials. Most often it is aluminum, durable varieties of plastic and wood. Less often used, for example, bronze threshings and planks. Any store building materials It can offer a fairly large range of such goods.

Laminate dock with boob

When we connect two of the same type or, on the contrary, the varieties are applied, decorative expansion threshings are used.

Their functional purpose is divided into the following types:

straight intended for connecting single-level floors;
transition connecting multi-level planes;
finishing used for the processing of the edge in planes above the floor level, for example, balcony thresholds or on stairs;
corner (stairs)used for fastening flooring to the stairs.

In building stores, this type of product is presented in a wide range. They are performed from a variety of materials: metal, plastics, plugs, rubber, wood, laminate. The ability to choose color and width will satisfy every taste.

By the method of fastening, the threshings and the planks are divided into 3 types:

through fastening - This method involves fastening the plank screws or dowel-nails through through holes in the plank to the floor;
secret mount - In this case, the screws of the screws are inserted into a special groove in the back of the plank. After that, with the help of impact hammer on the bar, they are cozed in advanced plastic dowels in advance;
adhesive - This method of fastening of the thresholds and planks is most often used in the locations of the laminate and tiles docking, rather than with linoleum.

The shape of the shoulders for the joints is different, which is very convenient when repairing and connecting, docking laminated panels with linoleum. If a semicircular junction is conceived, then there are such on sale.

Properly selected decorative thresholds, molding or plank will help you perfectly docile a multi-level floor covering different rooms and premises. He will cover the castle line of the laminated panel and the edge of the substrate under it, and also reliably fix the edge of the linoleum.

If some kind of figured connection of two different floor coatings is assumed, then it should be borne in mind that it will require special care in the operation of docking, which is much more difficult than the docking in a straight line. The joint of the laminate and Lenoolem on the floor decorated with the help of iron and moldings is practical, comfortable and beautiful, with a neat laying.

During repair work The apartment or private house uses a huge number of diverse materials. They need not only correctly and efficiently use, but also to be combined with each other, creating a single composition. One of the very popular types of flooring is Linoleum, but this does not mean that only it should be used for laying on the floor.

If you combine this material, for example, with outdoor tiles Or laminate, you can create not only functional, but also a beautifully reversed floor.

In order for the transition between different flooring, and the individual parts of the linoleum was inconspicuous, special threshings for linoleum are applied. We will understand what their functions, what types and sizes they are, from which materials are made and how to establish them correctly, so that this element serves for a long time.

Functions

The main functions of the thoring:

Protects the joints from pollution from entering - if you set this element to the floor, then your floor covering will be protected from dust, dirt and moisture penetration. Thanks to this docking, linoleum will be protected from stratification, and mold will not be formed under it.
Linoleum protects from breaking in places of docking and connections.
Eliminates the differences - during the compound of two floor coatings, which differ in height, such a docking plate will be smoothed as much as possible the height differences and will not allow the material to smell. Such spores can be used for a compound, for example, linoleum and laminate.
It acts as a decorative element - even if you try to roll individual elements as much as possible, will remain visible seams or the place of the junction that looks at all aesthetically. To avoid a similar situation, you need to use the spores for linoleum.
Improves perception of different types of coatings. Due to this, various floor coverings look like a single element, without contrasting each other in color, texture and shade.
Similar flags are used and as a junction bar between rooms.

Thanks to the listed functions of such slats, you will have to create the perfect designer coating, without even resorting to the help of specialists.

Views and sizes

Depending on the functional features, Multicify several types of thresholds for linoleum:

Direct (single name is single-level) - applied to dock one or more variants of various materials. Such floor coverings are located at the same level or have a minimum difference that makes up not more than 1 mm.
Drop-shaped (second name is multi-level) - used to connect materials that differ in height. Such planks are used to dock linoleum with outdoor tiles, laminate or parquet. They are able to level even significant differences in the height of floor coverings, the size of such a differential can vary in the range from 0.3 to 1.8 cm.

Finish - stacked in the place where the linoleum ended, and the docking with another coating is not carried out. Most often, such thresholds are used in doorways.
The corner (it is also called stair) - this plinth is characterized by an angular shape and acts as a fastener to dock and consolidate materials on the stairs. Such elements are very flexible, as they are made of rubber.
The final - is used to arrange an approach to the threshold or a podium, which is characterized by a large drop in height.

Please note that the strains for linoleum must be chosen, focusing on the applied floor covering, Existing differences in height, advanced service requirements. For service life this product It will affect not only the correctly selected type of the thoring, but also the material from which it is manufactured, as well as how correctly it was installed.

In size, the threshings can be both wide and narrow. Most often, wide thresholds are used to hide the resulting large gap between different flooring. A narrow plinth is less noticeable on a general background and does not attract special attention.

Materials manufacturing and design

Molds for laminate are made of various materials. The most common are such options:

metal;
plastic;
rubber;
cork.

Metal

One of the most popular plinths are metal models, as they are characterized by a long service life and presentable appearance. Such products are made from either brass or aluminum. Aluminum thresholds are more common than brass counterparts, as they are characterized by lower cost.

The main advantages of aluminum threshing are:

They differ ease and durability, so they will serve for a very long time, retaining the original appearance.
Apply both in residential and in non-residential premisesSince they perfectly carry the temperature differences, load and increased humidity.
Manufactured by B. different sizes: both narrow and wide. If the aluminum threshold is stacked in the doorway, which is characterized by non-standard dimensions, then such a product is very easy to shorten, it is enough to use a hacksaw or a grinder.
Smooth surface It helps to make even a significant difference in height.

The only disadvantage of such a plank is that it can easily slip on it.This feature should be taken into account especially those families where there are small kids or the elderly. In order not to happen an unforeseen traumatic situation, it is better to stop your choice on aluminum plinth, which in the middle there is a corrugated strip. Such a product can be placed even in the bathroom, where the floor is very often slippery.

During the production of metal thresholds, they can be painted in a variety of colors that copy bronze, silver or gold color. The use of lamination technology helps to produce a plinth, the finish of which will resemble the texture of a tree, a stone or other material.

Plastic

Polyvinyl chloride is used to produce such slats. The main advantage of plastic thresholds is extensive color palette which is obtained due to the fact that the paint is added to the original composition.

Most often, such products are used to combine different types of flooring, for example, linoleum with carpet.

An important advantage plastic plinths Speakers also high flexibilitywhich helps to reorganize curvilinear joints in floor coatings. It is worth considering by choosing a similar product that its service life is limited, as it differs fragility and with time it can lose its perfect appearance. After a certain time it will have to be replaced, but since the cost of plastic thresholds is small, you can do it without prejudice to the family budget.

Rubber

Such thresholds for linoleum are manufactured in two versions:

completely rubber;
possessing an aluminum basis.

They are used in the finish to minimize the gliding flooring.

Rubber plinths are also perfectly connected by curvilinear seams.

Cork

Such planks are used to fasten the linoleum, as the plug has excellent depreciation properties. Thanks to this feature, they are also called compensatory slats. Cork threshings can be made varied shapes and sizes.

A wide selection of materials and a variety of colors allows you to perform a finishing of the floor covering on any, even the most arrogant taste.

Installation and Molding Methods

In order to hide the joints between laminate and linoleum, it is necessary to correctly install the thresholds. The most popular method of its installation is fastener on a dowel. In this case, a decorative plinth with an aluminum strip is used. This mount is called hidden, as the dowel is hiding under the lining and do not spoil the aesthetic appearance of the flooring.

In order to secure the planks correctly, make the process in stages:

squeeze the seams;
cut the thresholds, confining it for the desired dimensions;
clean the seams from pollution and dust;
place the planks moving from the center on the seam with the marked place for laying;
note where the dowel must be;
using a drill, make holes in which fasteners will be inserted;
next, you should fasten the screws and on top of them to install a decorative bar.

There are also small tricks, how to fix when laying linoleum, which is characterized by curvilinear or arcuate joints. Secure the planks on such joints in two ways:

Soft joke - In this case, a flexible plinth is used, which is attached to the floor, and the decorative plank is put on top. Similar products are very easy to bend. They are able to hide the joints between laminate and linoleum 1 centimeter on each side.
The aluminum profile is able to hide small junctions (several millimeters on each side).

The process of securing the plank is as follows:

Drill in the floor of the hole for the dowels.
Measure the threshold of the corresponding length, insert a dowel into the holes.
To give the profile the necessary shape, it must be lowered into the water heated up to 70 degrees, and leave there for 20 minutes. After this time, the threshold will become very flexible and it will be easy to bend it.
Next, you need to fasten the plinth on the screw and insert the plug on top.

The threshold on the balcony is most often attached to the mounting foam:

You need to clear the basis for the threshold from pollution.
Measure the opening and cut off the thresholds of the required length.
Next, you should put a flat layer of the mounting foam.
From above, arrange the thresholds and put the cargo that will hold the design in the desired position.
After the foam dries, the gaps formed at the joints should be closed with silicone sealant.
Next ends are closed with special plugs.

Did you like the article? Share it

Print article