How to assemble a table of boards. Original and functional: how to make a table of wood with your own hands

To begin with an amateur independent manufacture Furniture should learn how to create a stool because it is the easiest. And then the time to study the question of creating a table comes.

Table designs are different, however, the simple version is very similar to the process of creating a stuff.

A simple table for use in the country or during a departure to a picnic you can collect just a few hours. To do this, you need a hacksaw, a hammer or drill.

However, a table based on a similar approach can be made for residential premises. Since it is able to perfectly replace the current very large option, purchased in the retail point of sales or furniture store.

The process of self-creating the table is interesting and on the other hand, since the freedom of creative expression of the author appears with the help of it. It can be represented as a noticeable element of the interior of the room.

The creators of manual amateur furniture are not just called joiners. It does not apply to the usual definition like: Sounders or bedside beds, and maybe lockers.

Having gained experience in this direction, over time it will be possible to create exclusive types of tables that are characterized by advanced characteristics.

Now consider the question of the independent creation of wood-based tables.

Wood is characterized by cleanliness and accessibility, in addition, it is not so difficult to process, like other materials. It transmits the maximum energy of the aesthetic filling of the style of the residential room.

At the expense of its properties condescendingly refers to the mistakes of beginners in the field of independent creation of furniture. However, thinner versions of the tables will require an advanced level of skill.

To begin with, learning to work with wooden things, then it will be easier to use as a material: glass, plastic or even metal.

Selection of tools and room facilities

To engage in independent creation of tables or other wooden furniture elements, it is necessary to use only a non-residential room.

This is due to the specifics of working with wood. It leads to education large number Dust, chips and other waste.

And the process of toning or creating protection for material based on the simulation is capable of forming dangerous release into the air. Actually nitroleki can also be dangerous.

Because of this, for a personal joinery workshop will have to take care of the air ventilation. Specialists advise creating artificial ventilation of the premises.

Many for this use a garage, however, waste production can pollute or damage the car because of this is not the best option.

Joinery tools belong to modern and traditional species

For the most part, for a start, it is possible to limit the simple carpentry tool, however, it may be necessary to see modern versions in the form of:

  • The swivel version of the stub, helps to create a sleep based on two planes, adhering to the required size.

  • This tool will open all its beneficial featuresFirst of all, with an ampace saw. This couple is considered universal, it can come in handy for the fulfillment of many works.

  • The handmade version of the universal electric jigsaw, which is characterized by a tilted shoe, helps create a propyl based on the necessary angle with respect to the vertical plane.

  • Disc version grinding machine. It will help newcomers to process the tree surface approximately for 5-15 minutes. An experienced joinear together with the skin will be able to perform the same work for about an hour.

And there is also an ordinary grinding ribbon machine and for grooves with in-depth places, characterized by a protruding option for the working part.

Such tools are highlighted by the price and narrow specialization of work, experienced masters recommend that they take them into a short lease term.

The best specialists using, various grinding machines can even create an effect of artificial aging wood, however, it is a very difficult job as for beginners.

What tree is suitable best?

To create a wooden table, any wood, which has an average resistance to the rotation process, however, should be refrained from soft versions like: poplar, willow, wood of ailant, aspen and more alder.

Of the domestic types of wood it is best to use:

  • soft versions in the form of pine, fir, cedar, horse chestnut, plane, juniper or ate.

  • solid in the form of an ideal oak suitable for many works of beech, maple, nut or ash, larch, as well as fruit rocks represented by apple trees, plums, pears, apricots and quince. And also here should include Elm and Ryabin.

  • pretty solid views based on acacia, tees, stone birch, dogwood and says.

Conclusion

The table and probably all kinds of furniture created by their own hands, I want to decorate with an artistic version of the painting, and not ordinary stripes.

However, over time, the drawing can be spoiled so that this does not happen to rub the paint into the depth of the tree to the varnishing process. This can be done on the basis of equipment - lesing. We are talking about layer-by-layer rubbing, using paints.

Photo tables do it yourself

The table is an integral attribute of each house - can be made of different materials, Have a simple and intricate shape and carry different functions, but it is absolutely impossible at all without it. Not everyone understands why make the table do it yourself, if such a common item is easy to buy in any furniture store. Indeed, not everyone will venture to make the furniture handicraft.

But that brave, who thoughtfully undertakes to work, will certainly receive pleasure from the process and the excellent result of his works. Some come to this, wanting to save, especially if something uncomplicated is required. Others, obeying the creative impulse, wish to have a unique subject of the interior in the house, which will increase the mood and self-esteem. In addition, the table created by their own hands always has Ideal proportions and fit the style of the interior specifically your home.

Form and design of the product

A wooden table is an environmentally friendly, aesthetic and durable product, which will successfully fit into the apartment and to the cottage. Moreover, there are options for special garden tables. It can be light, portable, or solid and massive, have different models And forms:

  • Angular;
  • Oval;
  • "Book";
  • Folding;
  • Sliding;
  • Transformer.

Transformers, perhaps the most interesting category of tables.In folded form, they are very compact and are something like a small bedside table. If you put it to the wall, then it will take no more than half a meter. The table of this form is indispensable in conditions of limited area, when there is no possibility to keep a large dining table on a dozen persons. Folded cover countertops are attached with a looping system. Transformers are usually rectangular, but there are round models.

Before proceeding with work, decide which configuration and size you need. Below are given general recommendations Professionals:

  • Hand-Maid table must correspond to the room for which it is created both in size and style;
  • When creating an outdoor option, it is important to think in advance how many people at one time will use it;
  • Folding table - a great option for hospitable hosts. Such a product will be applied in the collected form for family dinners and will become a find for the reception of guests;
  • For a comfortable feast room at the table, allotted for each guest must be at least 70 cm;
  • The children's model must be designed according to age and the growth of the child.

The manufacture will cost certain works and time, but the result will delight. After all, the product created by your own hands will be inexpensive and fully appropriate to your ideas and desires. If you wish, you can make a whole furniture set, but it will require special skills and skills.

Before proceeding to the manufacture of the table, it is worth carefully reading the drawing so as not to translate materials in vain.

Tables can be divided into the following constructive types:

  • From a solid array of wood;
  • Prefabricated (made of terraced, tipped, unedged board);
  • Glued;
  • Made in the form of "shield" from the lamellae.

Furniture made of solid wood array refers to an elite and has a fairly high cost. The remaining options are simpler and can be used both in its pure form and in combination. The glued table tops from the boards of different breeds of the tree, made by epoxide, are very pleasant, which is the adhesive composition based on the resin. Natural wood pattern and different textures create an incredible effect. Products made according to this technology, very durable and resistant to deformation.

Selection of material

The most popular material for the manufacture of tables and the other sadroom furniture is a tree. It is easily explained, because wood has a number of significant advantages over other materials, such as metal or concrete. The tree has such advantages as:

  • Ease of processing;
  • High aesthetics;
  • Resistance to different climatic conditions;
  • High amortization;
  • Restoration possibility;
  • Ample opportunities in the field of processing and painting;
  • Safety for human health;
  • Low cost of individual categories of wood;
  • The beauty of natural patterns.

Natural tree - Material of a beautiful natural texture, sufficiently inexpensive, environmentally friendly and durable. It moisture-resistant under the condition of special treatment, fueling for joinery tools, therefore, is excellent for the manufacture of home furniture and utensils.

The appearance of the finished product and its characteristics will depend on the type of material and its preparation, so it stands with the selection of wood. Each breed of wood has its hardness. You can highlight the most popular trees breeds:

  • Spruce, pine and cedar belong to soft wood rocks. Easy processing material, but prone to deformation, drying and cracking;

  • Oak, beech, larch and birch - representatives of solid wood. Beautiful and noble trees. Moisture resistant and durable. For processing oak and other products from solid wood, electric tools will be required;

  • Superhard materials - TIS, HRB and acacia - owners of extremely dense internal structure are high strength. Require professional industrial processing.

For the manufacture of wooden table you will need edged board or timber. The table made from the porch will have a brutal view and perfectly fit into the country house in the hunting style. A wide neck can serve as a material for the whole table top. Another material to create a countertop is a stem section. First, the trunk of the required diameter is selected, then a smooth slice is made and varnished. With this technology, a large number of waste is formed.

The durability of the product depends not only on wood processing, but also from the selection of wood. Not always solid breeds turn out to be a good choice. Under the conditions of temperature and high humidity, the tree swells and crumbles. The optimal option for street or country countertops is elastic wood.Such characteristics as hardness and elasticity provide resistance to deformation. Such properties boast spruce, aspen, larch and linden.

Before starting carpentry work, the tree must pass polishing and processing with an antiseptic, and at the end it will take a lacquer coating. In addition, the veil will give the product a finished look.

Preparation of instruments

If you were inspired by new ideas and decided to make a wooden table with their own hands, it will be necessary to prepare the following tools for work:

  • Reysmaus;
  • Saw
  • Electrolovik;
  • Hacksaw;
  • Jointer;
  • Mill;
  • Screwdriver;
  • Drill;
  • Grinding device;
  • Clamps;
  • Pencil,
  • Roulette
  • Corolnic

In order for the work to argue, consider the shape and size of the product, prepare the drawings. The size of the product will depend on the area reserved under it, and the height is average equal to 70 cm. Here is the list of materials necessary for the work:

  • Antiseptic;
  • Sandpaper of varying degrees of graininess;
  • Boards;
  • Bar or porch;
  • Paint and veil;
  • Glue.

For a standard family of their four people, a square-shaped table with a width of a side equal to one meter is suitable. Size 120 by 90 cm will be placed both hosts and guests.

Building drawing

The drawing is a diagram, clearly narrowing about the sequence of actions, follows which the expected result is guaranteed. If a unique design is conceived, then you will have to work on the scheme and drawings yourself. To do this, you can use the computer program, then print the received documents to have a visual guide.

Production of details

Step-by-step process of manufacturing table tops from wood can be described as follows:

  • Select the desired volume of materials. For a standard width, you will need 6-7 boards of 3 cm thick. Suitable only perfectly even, treated with a fugar board. The bits of the hindrance are not.
  • Cut the antiseptic processing tree and dry carefully.
  • Share boards in the form of a smooth rectangle. Align the junctions.
  • From both sides to attach a bar and smoothly cut off.

  • Bar scream to boards. On the reverse side of the table top, in the center of the boards on each side, drill a hole for the bolt through a bar for 2/3. On the bar make a recess wider so that the bolt's hat drowned.
  • Round the corners.
  • On the bottom diagonally to attach the board with self-draws, lubricated glue.
  • Collect the surface first with coarse sandpaper, then softer.
  • Cove the product with mourn and varnish. If desired, the table can be painted.

Homemade Tabletop of glued massif

Tables from such material have a smooth and homogeneous structure, do not have joints and cracks. Another argument in favor of this technology will be resistant to the emergence of deformations and cracking. To make the table, you will need 4 boards with smoothly across the edges, having the following parameters - 1x1.5x0.5 m. The algorithm of work is:

  • In the ends at a distance of 10-12 cm make holes with a size of 8-12 mm. They are needed for fastening the wrenches and copilyons. Holes in two side boards are made only on the one hand.
  • Properly fold the boards before handling glue.
  • Collect the boards, losing with glue.
  • Insert the ducts and make the boards.
  • Align the ends and make sure the correct position of each board.
  • Putting a ready-made tabletop on a flat surface and firmly compress the clamp.
  • Leave for drying.

Round shape table

To implement the idea of \u200b\u200bcreating round Table. Predit, you need to have following materials:

  • Square timber (width - 100 mm, length 750 mm - 4 pcs;
  • Boards 100 by 20 mm, length 750 mm - 2 pcs;
  • Boards 250 per 40 mm, length 2000 mm - 4 pcs;
  • Boards 100 by 20 mm, length 800 mm - 2 pcs;
  • Boards 100 by 20 mm, 1600 mm long - 2 pcs.

Phased instruction To create a round table Handmade:

  • Four long boards tightly folded with each other.
  • Draw a circle.
  • Crop the logs along the line.
  • Make a rectangular frame and bore a circle screws.

  • Fake a feet of the leg.
  • Check stability, and then disassemble.
  • Treat tree with sandpaper. First tough, then soft.
  • Covered by mourn and varnish.

At first glance it seems that the most important part of the table is a tabletop. However, it is not necessary to underestimate the legs of the product. After all, it is they decorate the table and give him a certain style. The legs must correspond to the main style of the model and the necessary parameters.

The paradox is that, the more complicated and the stands of the table, the less they will serve. The most reliable will be simple wooden, stable and light supports. Drawings for them can not be done. Stages of manufacturing table legs:

  • Selection of four equal in length (85 cm) of bars;
  • Installing bars at the corners of the table top;
  • Connection on each side by boards or bars: two equal length, and two - width;
  • This design is glued to the table and leaves for drying.

The table does not always have the standard four legs, sometimes the masters are resorted to the creation of a podstone from the frame and one or two legs. The glue can be replaced with furniture corners, which are fastened with self-draws or for reliability to use both options. You can create an unusual fantasy model, exactly attaching a tabletop to suitable and bizarre wood roots. It will be a stunning product that will only have you.

Features assembly

In each element of the product, holes are drilled, then combined parts with bolts, which makes the product really durable. Enhance the effect can be used fixation with good glue.Self-tapping screws are screwed from the inside under an acute angle in relation to the board. If the finished product is noticeably walking, use special straps with retainers. This will help make the design more reliable and stable.

For the legs, wooden bars are taken, which must be treated with a planer in the form of a cone. Greatly suitable for this and carved balusters, which can be bought, and independently add to turning machine. Performing a design with your own hands, a person gets skills to work with a tree, so if it becomes necessary to make the product repair, it will not cause difficulties. You will have all the necessary arsenal tools. In addition, it will take wood and means for restoration of old wooden products.

Treatment

Get a good and good quality is not so difficult. The main thing is to comply with all the necessary conditions. After the main work, the final time comes, but an equally important stage - the processing of the product varnish. To ensure that this operation is correct, follow these rules:

  • Collect manually edges of the table top;
  • Apply high-quality varnish onto all the product. In addition, it will be very decorative to staining some parts of the paint table;
  • Ogrechi in the work is well masked by putty, suitable in color.

The most popular version of the decorative decoration of the wooden table is the coating of its surface with a transparent or color varnish, which will emphasize the natural wood pattern and will ensure its protection against the influence of external factors.

For so that the product made personally served for many years, remaining the pride of the owner, it is recommended to follow the uncomplicated rules:

  • Avoid direct contact of the product with an open sun and not to leave on the street in the rain;
  • Follow the cleanliness of the surface;
  • Processing polyrolla;
  • In winter, keep the table in the room so that the lacquer is not injured.

Before assembling, each wooden part must be treated with anti-cartines, which will serve as protection against rotting, increase moisture resistance and refractory.

Exterior decoration and design

The most pleasant stage of manufacturing furniture with their own hands is definitely decorative finishwhich each master performs in its own way. To receive you need to original model, you need to think over the external design of the product. For help you will come cuts of small trunks, decoratively laid out on the worktop. Also a wonderful decoration is a wood carving. Carved legs and a countertop will give the product grace and ease.

Many prefer to make a worktop under the glass. This option is suitable if the table will be indoors. The table painted by hand is unlikely to be unattached guest. Such a product will make a special flavor to any room.

For those who are not silent in drawing, the design of the drawing through the stencil is suitable. This, indeed, is extremely simple, however, there are some nuances: it is recommended to apply the pattern with acrylic paints, since they, frozen, form a thin film, so do not spread.

Before apply a new layer of paint, let dry the previous one. You can work with both brush and roller.

Frame at the edges of the table top always looks worthy. Create a perfectly smooth line will help the greasy tape. Ready drawing Cover varnish. The easiest and proven option is a game of color boards. Using paint, simulats and sandpaper, you can create an effect of aged tree. The products "under noble old" always look spectacular and expensive.

Decoupage technique is just a find to create a decor of a new wooden table or restravelation Retraomelebel. This method is to attach a paper picture to the surface of the product with a furniture varnish. The choice of drawing is carried out to taste the owner. It can be images of nature and animals, rhythmic patterns, black and white graphics and even a photo from the family archive. Materials can serve napkins, newspaper cuttings and vintage postcards.

The new table is easily enjoyed using a tile in the form of a mosaic. To date, there is a wide choice in construction stores. It is advisable to use one tile set so that there is no inconsistency in height and the unnecessary relief is not created, which can damage the pattern and make the table inconvenient to use. In addition to mosaic, you need to purchase glue and grout. Briefly, the process of creating table tops with mosaic masonry can be described as follows:

  • The surface of the tabletop degreases with alcohol;
  • Then processed by sandpaper;
  • Start display from external edges;
  • Secure the elements;

  • Leave one day for drying;
  • Divide the grout to the desired consistency;
  • Mix the seams thoroughly;
  • An hour later, remove the remnants of the grout;
  • Give the product to relax for two days, then wipe with a rag with the addition of vegetable oil for glitter.

Budget version of the mosaic decor will be Design table egg shell. It is necessary to crush the shell into the church of the medium size, then put the surface of the table top for pre-lubricated PVE glue. Try to leave the gaps between the shell. If desired, the shell can be painted.

Very noble and expensive, countertops with design from Potali. Palk is a thin sheet of metal alloys, mimicing gold. This material can be purchased in art stores. The desired pattern is applied with special glue to the surface of the table, after 15 minutes, cover it with a sheet of sweat, carefully unfolding it. Then you need to walk on the surface with a soft brush and admire the result.

A glowing table is an excellent design solution, besides, quite simple in implementation. The finished product is equipped with special illumination - small lamps or tape with LEDs, providing the most different variants Backlights: From simple to color.

Modern kitchen headsets often do not include such a matter of essentially, as a dining table, and if it is included in the basic configuration, it is usually completed according to a typical project from cheap extruded wood. Of course, such products are not famous for the original design and durability. Such tables are usually inexpensive, but it is still better to abandon the unsuccessful purchase in favor of the homemade dining table from the tree, with the creation of which any newcomer can cope in the home joinery.

Physical work related to wood work (sawing, planing), usually gives the great pleasure of novice masters, and a good result will not wait long.

It is important that the activity related to independent design and assembly of wooden models is very creative. Rarely someone tries to completely repeat the model you like from the store. The model design is usually taken as the basis, and the remaining parameters are being finalized by a master of own nate. On the veranda or in the country house, the utility rooms are better to choose transformers:

  • Folding,
  • Hiking;
  • Suspended;
  • Garden;
  • Level.

Stationary use tables are made in unchanged sizes:

  • Coffee;
  • Massage;
  • Writing
  • For laptop;
  • For a bath.

The assembly of such products is very durable, the parts are tightly fasten, the hinge connections are missing.

Tables for giving or terraces usually have a standard rectangular or round shape. However, there are craftsmen who manage to make the table in rustic style In the form of a penetment, but a bench in the form of a log, which looks very impressive. This ensemble is easily complemented by tabretes from log sections in the same style. As you can see, we independently make a wooden table - this is a simple job.

With the exact following instructions, the correct selection of high-quality materials and suitable tools, it is guaranteed to be durable and beautiful table, which perfectly fit into the parameters and style in your interior.

It is no secret that the furniture is used in the country, which served his term in the apartment. The table is no exception. However, in the country conditions, the furniture that perfectly served at home can not always fulfill its purpose. We are talking about modern tables made mainly from LDSP. Such tables are not suitable for the arbor, the veranda, the garden, and in the house with high humidity in the offseason, their service life is limited. In such conditions, the table is required wooden, but the wooden table is not cheap pleasure. Solving the problem to make the table with your own hands. It's easy enough to do it. In addition, it will significantly save, including on delivery.

The most simple design of the table

SAMI simple design The table is shown in the photo below. At the same time, such a design is the least costly both in relation to materials and forces to manufacture.



Fig.1.

Optimal overall table sizes

One of the advantages of the manufacture of the table for giving with your own hands is that the table can be done any size. Thus, the table is easy to adjust to the dimensions of the arbor, veranda or kitchens.

To make it easier to navigate in size, I will bring the dimension mesh, which is most often used in the production of tables. Dimensional mesh is based on the size of the table top.

  • 60x90 cm. The table with sizes is optimal for 3 people. For this table, it is convenient to dine, drink tea, etc. Due to its size, it will fit well into any small space.
  • 80x120 cm. At the same table can comfortably sit 4 - 6 people. Usually the table with such sizes is appropriate to put in a large kitchen or on the veranda.
  • More than 120 cm. Tables with sizes are good for feasts. In the conditions of cottages and limited space dacha houseMainly such a table is installed in a gazebo or under the outdoor canopy.

Naturally, making the table with your own hands the size can be made arbitrary, however, so that at the table it is comfortable to adhere to the recommendations given above.

Production order and drawing

The drawing of the table is shown in the figure below.



Fig.2.

Foots for the table are made of wooden bar Section of 40x40 mm 70 cm long. If there is a desire to decorate the table, you can use balasins as a leg. They are carved, and make the design of the table more interesting.

Support for countertops can be made from the board with a cross section of 25x150 mm sawing it along two halves. For support, 2 boards are 650 mm long and 2 boards with a length of 1050 mm.

With the worktop, everything is much more interesting. Tabletop can be made different ways. The easiest option is to purchase the furniture shield of the desired size. It can be purchased in network hypermarkets building materials.



Fig.3.

Going along this path it should be remembered that the furniture shield is manufactured by gluing small segments of the boards, and with constant exposure to it atmospheric precipitation, it will quickly come into disrepair. Therefore, the table with a tabletop made of furniture shield must be treated with varnish or paint to protect against moisture.

Another option is a tabletop of boards. Boards can use any size. For example, a cross section of 25x100 mm. This is a simple and cheap option of the table top. This option is devoid of flaws that are inherent in the furniture shield.



Fig.4.

However, without special equipment, the boards are unlikely to fit tightly. Therefore, the tabletop will have gaps between the boards. It looks good for the Garden Table. But not very practical.

You can get rid of the gap that can be applied not an ordinary, tipped board. It will be somewhat more expensive, but it turns out a smooth smooth countertop.



Fig.5.

You can use boards for euro floor as a t-shit board. They are easier to find in the store. It is just important not to forget to ride them from the wrong side.

Collection of table.

Once all the elements of the desk are ready to start assembling the table. The table assembly is performed in a specific order.

First, they collect support for the table top and fix the legs to it. This is the most difficult moment in the table assembly. As previously described, the support for the tabletop consists of 4 boards. They must be combined with each other. You can do this in several ways.

The photo below shows how to assemble a support for the table top and fix the leg with the help of a special screed.



Fig.6.

This method is the ideal solution, except for the fact. What to purchase a special screed may not be easy.

Another way is to pull the entire design with a wooden bar.



Fig.7.

Using this method, you need to pay attention to the fact that the bar must be sprinkled at an angle of strictly 45 degrees. Otherwise, the table will not be rectangular.

In my opinion the easiest and affordable embodiment of the legs and supports for the table top is the use of a metallic nicking corner of 50x50 mm. You can buy it in any store, and it has a proper geometric shape.

The last stage in the table assembly is the installation of the table top. Depending on the type of tabletop, it can be fixed in various ways. The furniture shield can be mounted or with glue. Separate boards with self-tapping screws and glue.



Fig.8.

As you have already been able to understand, make a table for giving or house with your own hands is quite simple. It is important to approach the question creative. Such a table can be decorated with any paint coatings. Wooden table made with your own hands will delight you every day and will serve for many years.

Wooden tables and ideas for design



Fig.9.



Fig.10.



Fig.11.



Fig.12.

Under the conditions of modern small-sized apartments It is quite difficult to give the will of fantasy and acquire furniture items that would suit everything. Among other things, it is enough to find such elements of the interior that would be attractive not only on design, but also by price. It is possible to solve these two tasks with the method of independent manufacture of wooden furniture. This may be, for example, the table. You can perform it by preparing all necessary materials and tools. Use this subject of the interior can be both in the kitchen and in the living room.

Preparatory work

In order to make a wooden table with your own hands, you will need to prepare some materials. It will take a furniture shield whose thickness is 19 millimeters. This material is characterized by high strength and looks very attractive. Shields on preparatory Stage It will be necessary to post, and after - cut off the blanks. Important stock and necessary for assembling fasteners. Thus, it will be necessary to prepare 6 boards that will make up the lower support. Their size is 19 x 100 x 965 millimeters. The legs will be 4, their dimensions - 19 x 215 x 680 mm. The legs are useful in the same amount, however, the dimensions of these elements must be equal to 1938 x 470 mm. Table-top supports will be a blank with dimensions of 19 x 125 x 610 mm. Wooden table for a gazebo can be made according to the same sizes. The master must prepare two shots for the legs with a 10 x 32 mm dimensions. Two jumpers with dimensions of 19 x 140 x 1100 mm should be separated.

Additional elements

It will take a steel screed in the amount of two pieces, its size should be 150 mm. The countertop will be limited to the following size - 19 x 1020 x 1900 mm. Planck countertops should be carved in the amount of two pieces and have dimensions of 19 x 19 x 1750 mm. Screws, washers, screeds, as well as sewages have to be used as fasteners.

Preparation of instruments

Wooden table with your own hands it will be impossible to make, if you do not stock up with an electric jigsaw, a disk saw, hacksaw, a drill with drills, a plane, milling machine, a file, clamps, brush. For fastening the parts you need carpentry glue, it is possible to process the wood that will be sandpaper. The table will well look like, if you treat it with a polyurethane varnish, which can be glossy or matte.

Manufacturing technology

If you decide to make a wooden table with your own hands, then you need to know that each supporting structure has 3 glued blanks among themselves. In the central part should be formed by the opening. Immediately you need to cut 6 elements for two supports. Next, the master must make direct drive using a disk saw for this. Corners must be rounded. In two billets, it is necessary to cut the central part so that the groove occurs on the central part of the support. The width of the groove should be slightly less compared to the thickening of the spike in the leg. This will eliminate the separation of the design during swelling and drying.

At the next stage, you can glue supports. After applying to the surface of the adhesive parts, they need to be folded so that the upper edges are cutting into the flush. The reliability of the attachment will provide clamps. After the supports are succumbed, it is necessary to get rid of excess glue. After clamps are removed, you need to exit the lower and upper edges.

Work on legs

When the wooden table is manufactured with their own hands, you need to prepare four legs. After vertical edges, it is necessary to shoot and round them with a milling machine. At the ends of long blanks, it is necessary to place, and then cut the spikes by placing them from below and from above. You can do this with a disk saw that must be provided with a combined disk. After the moldings will be taken and brought to the necessary dimensions, you can round all 4 ribs. On the reverse surface of moldings, it is necessary to make grooves for glue.

Work on supports

If you decide to make a wooden table with your own hands, the photo of the design will help you solve what features this piece of furniture will be posted.

The next step will be cutting blanks for supports. For gluing, you should choose a 10 mm groove in each workpiece. It is preferable to produce data to manipulate immediately. In order to simplify the task, you must prepare a cardboard pattern by placing the location of the grooves. Next, you can make pairs of gluing in such a way that the propyl is located in the central part. Everything needs to be filled with clamps. As soon as the glue is dry, you need to clean the sleeve using the emery skirt.

Installation of legs

If a wooden table is made with their own hands, the photo must first be considered. It is important to initially adjust all the connections without the use of glue. With wide edges, the compound should be dense. It is necessary to provide a gap of 1.5 millimeters to compensate for the change in the size of the wood. When edging, these items will be decorated.

Walls and spikes must be treated with glue, after it can be started to pair the legs with vertical supports. Without waiting for glue, it is driving, it is necessary to do holes and enhance the pairing with the help of a wanking. If you decide that the wooden table will be manufactured with your own hands, the drawings are recommended to prepare at the initial stage. For the legs, cut off the moldings of the required length. They need to be glued and torn using clamps. The glue is applied, and after it is left until drying.

If you decide to make a wooden table with your own hands, the drawings can be borrowed from the article. The jumper should be installed high, so that the sitting at the table did not hurt her legs. It is necessary to make gluing using two slats, which will be pre-edged with molding.

After the glue dries, you need to remove clamps, and then remove the champ. On short sides, holes should be done to install fasteners. The countertop can be performed independently, its sizes may differ from those that presented above. On the ends you need to select spikes using the jigsaw.

Next, the spikes are cleaned with a file. Along the long edges of the workpiece, it is necessary to set the planks that are attracted by clamps and dry. Using the edge cutter, you need to level the edges of moldings. They should be fixed to the straps, and after it is enough and clean the joints using a grinding machine.

When a wooden table is manufactured for giving with their own hands, the drawings will make it possible to understand how the compounds of the countertops and legs are made. To do this, use P-shaped brackets. On the long sides of the base, choose a quarter to fix the sidewall. The ends of the last elements need to round and clean it. After everything gluits and shrinks with clamps, and then left until drying.

Final work

Before making a wooden table with your own hands, you need to get acquainted with the technology of work. At the next stage, with a retreat from the edges of the base of 100 millimeters, it is necessary to do holes, the diameter of which should be equal to 20 millimeters. Between them should be located through grooves. The holes are required in order for the base to be split. If you are making a wooden table for giving with your own hands, drawings should help in carrying out work.

Now the wizard can build the table, for this you need to fix the jumper to the legs. Using a pencil, it is necessary to note the position of the legs in such a way that they are perpendicular to the end of the lid. Marking should install brackets. In the table top you need to do 10 holes for installing screws. Next, you can strengthen the brackets. Under each screw, it is necessary to put a puck, it will allow you to compensate for the shrinkage, it will only work out to make a folding wooden table with your own hands.

You can change the technology and size of the table at your own discretion. However, it is necessary to remember that the design should be as strong as possible and reliable. It is important to protect the wooden elements from the negative impact of the external environment, especially the objects of furniture that are supposed to be operated in the kitchen or outdoors.

The interior of any house will decorate the handicraft made by his own hands. Not the most difficult version of individual creativity is a homemade wooden table. Develop a design is easy to independently. Here the fantasy flight is unlimited, but you need to start with the choice of design, destinations and designer features that you plan to implement. At the very beginning, you need to create pictures and drawings for which you can collect a finished table.

Drawings and schemes

Initially, it is necessary to work in detail each element, especially decorative additions, if they are planned. This is exactly the case when decoracing will not be superfluous. It is best to draw a drawing in accordance with the real dimensions by selecting the appropriate scale on paper.

Type of table can be the most diverse, from the usual written to the children's massage. It is possible to make the table with your own hands for a bath. One of the easiest in the manufacture - an angular table.

It's not so difficult to create a small transformer or table book. It will take a little place in the room and functional in many situations. Sliding design will help save a little space. For home design, the table for the joinery is very suitable. Well, of course, the table on the veranda, where you can get together with the whole family on the evening tea party.

Decor

Decorating significantly improve appearance. Practical any desk design will decorate carved legs, especially if you decide to implement a project in a rustic style. Elegant will look at the addition of the decoration of the tabletop with backlight from LED lamps. A glowing table in the corner of the living room will add warmth into a cold winter night. Options can be an infinite set, but the main thing is not to overdo it and do not overdo the decorations.

Style and Design

For its own creativity there are no restrictions and strict frames. The easiest way to make the original thing is to fulfill it in style under the "old". This is the most common and not too complicated in the performance of the exercise. Imitation of antiquity will decorate almost any interior.

Design homemade table Ideally should organically fit into the interior of the room in which it is planned to use it. Various forms and art solutions are possible. Wood products allow experiment with geometry.

About how to make an unusual table, see the next video.

The form

Such a table can have different angles and does not lose in functionality. For each side of such a design, constive places for family members can be consolidated. Smaller sides - for children. Sides more - for adults.

Material

Tree is convenient to use in any condition. It is quite suitable for the secondary use of wooden structures. It is very good to use old boards. Many breeds over time become only better.

It is no secret that the age of valuable breeds is sometimes used for manufacture musical instruments. With secondary use, it is necessary to remove upper layerWhat will give the final product more neat look. Products from such material, without exaggeration, will serve eternity.

Combination of heterogeneous materials

The combinations of wood and metal look original. The massive plane of the table will decorate the iron, and ideally the cast-iron - legs. The combination of oak and cast iron will achieve an excellent result. Heavy cast iron is perfectly combined with oak or ash.

Unique will be a combination of solid African breeds and metal structures. The result will affect anyone, even the most demanding connoisseur.

Glass and tree are combined perfectly

An elegant wooden stand will be the best decoration for the glass table. Modern fasteners will ensure reliable articulation of these materials. The round shape of the final product with such a combination is the most optimal solution.

You can combine various materials

It is possible for lightweight concrete base Set wooden or glass top of the coffee table. A completely modern solution that will add a light industrial shade in the interior design. The combination of glass and concrete, as well as supplements from the pine will be perfectly looked.

How can a natural stone be used?

A completely elegant combination, if you do everything in moderation. You can not overload the design of the table with too heavy elements. Try to find a suitable base of natural stone. Wooden top design will tell the stone itself. Put a massive wooden surface on it and you will get a table that no one has.

Beautiful examples and options

It is quite possible to make very beautiful, original things that will look no worse than the famous masters. Homemade items will always be your pride and topic of discussion in the circle of friends.

What can be made independently?

Almost any table under the power of each of us. This simple household item does not require special knowledge and special professional skills. Wood products We begin to make another school, in labor lessons. Therefore, a simple wooden design of a table for a laptop will be quite on the shoulder. And chairs, and a shop for a country house can also be made independently.

You can come up with your own design of the home craft. The folding table will not constantly occupy residential space. It can combine several functions. From the place for the baby's swelping, to the working surface for home needlework.

A wide field for creativity will give a combination of wood and other materials. Do not be afraid to experiment. Connect together heterogeneous items, and you will achieve astounding results. Even if you decide to combine rarely combined items, do not be afraid to try. You can implement any ideas.

How to make a table?

Homemade design is worth starting with a small coffee table. The design can be completely simple. The working surface can be purchased in the economic supermarket.

Best is suitable glued pine. The glued array is less prone to deformation when moisture change and temperature drops. The legs for their craft are the most convenient to choose everything there.

Desk

It is better to collect it from finished wooden panels - quite a reasonable beginning of a home handicraft. Finished elements or entire blocks are easiest to order with delivery on the site where components for such works are sold. Here you can choose all the necessary fittings. It will only remain to spend some time on the assembly. Additional processing and fit will not be too complicated, the main thing you will get the necessary experience for further creativity.

Table for kitchen

It is not so difficult to independently make kitchen utensils. Can start with a small kitchen table From pine. Legs are easiest to buy ready, pine - most a budget option. The working surface is easier to choose under the planned dimensions. It will only remain, in the literal sense, put the table on your feet.

Kitchen set

Collect kit kitchen furniture According to its own drawings, the wave is under the power of everyone. We need certain skills to install opening doors, but this non-speed science can be comprehended by viewing several rollers on the Internet.

Required tools

You can start with a small set. Hammer, planer, chisel, saw on wood, nails and screws will be found in every home. You will need another line and pencil. If it is possible to purchase an additional power tool, be sure to do it.

Electric planer in the house or electrolybiz will be useful for the following crafts. Such a tool must be a good quality. He will last for many years, even if you will use it not every day.

Special tool

To achieve high quality, it is better to use special electrical drive equipment. The cost of acquiring will not be significant, and you will have the opportunity to continue to go to more complex projects.

What can be purchased in addition to the already existing electric drill:

    electric jigsik - will allow you to make high-quality cuts of any materials;

    electricubanka - make the surface of the tree perfectly smooth;

    circular saw - will provide longitudinal or transverse consuming of industrial quality;

    mechanical device for milling work - Processes the edges of your craft intricate pattern and help cut decorative elements on wooden surface;

    machine for grinding works - will do finish finish Wooden surface is a simple and pleasant occupation that does not require significant effort.

It is best to purchase a combined power tool combining several different functions in one device. This will reduce costs and will allow to embody many design ideas. By the way, the home electric drill can be added by various nozzles, which will expand its capabilities.

Accessories

If you decide to make a trip to the store for needlework, stock all necessary immediately. For your craft, you will need additional components to securely braid wooden parts. The simplest steel corners will make the design more reliable in operation. Do not skimp on additional decorative elements. They will not be superfluous, but will only decorate the appearance.

Large grace of wooden crafts will give ready-made kits that can be purchased in the store. A homemade writing desk for a child will look very beautiful if using metal legs from any finished furniture set. It is easy to make a bedside table from the same standard sets. Pens and accessories can be chosen in the same store.

Fastening wooden structures

The ancient technology of wooden connections without iron nails and glue is almost lost. But it will not be superfluous. Pick all the wooden joints with minimal gaps, drill in the holes of the hole with a diameter of six to eight millimeters and score a dried wooden spike there.

If all the wooden parts are unnecessarily sucked before assembly, over time they will type the required amount of moisture and increase their dimensions. The connection will become strong enough, and the wake-up wooden spike will give extra strength.

Traditional fastening options

The easiest and most reliable option is to drive a screw in a tree. Now they make special self-tapping screws for wooden connections, which, in contrast to a conventional screw, do not require an exact hole for screwing. If the connection thickness is not very large, then you can do without additional holes. Self-taking on wood will do everything himself, especially if you use electric screwdriver. Such a connection will last long enough without glue.

Why do you need glue?

To give a wooden design additional strength, it is best to smoke the articulated surfaces. The glue needs a little, but the result will be different when combined with self-drawing or nails, the glued wooden connection will remain durable for many years. Glue is best used on a water basis. There are many varieties of reliable joinery glue.

How to make the original home table?

Crafts of our own design is not so difficult. The material is found in any forest.

From the array of wood will be a unique handicraft. But for this will have to work a little. The ideal option is the basis of a large tree, the diameter of which is greater than eighty centimeters in the circumference. If you manage to use part of the root system, it will be a reliable base for the table and the additional legs will not be needed.

It is necessary to understand that it will not be easy to deliver such a blank from the forest, but the result will pay off all the works, such a table will not compare with anything.

Dacha

Street table for the country site certainly needs to be done. The perfect material is all the same log brought from the forest. The basis is convenient to make a small diameter from birch logs. They must be burned to the ground about fifty centimeters.

Then align their upper parts, scuffing an excess tree. The working surface can be made of large transverse diameter logs, sawing it longitudinally. The smooth part is just the surface of the street table.

All street extra buildings are best masked from a tree. This natural natural material Perfectly tolerate and moisture, and heat, and frost. A bench for the summer cottage is better to also be made independently of the same wooden components. A homemade bench will be organically looked from your manual table.

Why is it better to apply an array of wood?

The structure of the tree is such that its durability directly depends on how much its integrity is violated. Therefore, since many logs were applied to the construction of houses. With minimal processing, when a solid structure is preserved as much as possible, wooden structures can serve hundreds of years not destroying and without changing their form.

What can be made from a solid massif?

First you need to be patient to start. Spin the tree and deliver it to the house - it is the most difficult task. It is important to properly prepare material for subsequent processing.

Preparation of wooden billets

Be sure to get rid of the tree from excess moisture. If it fails to agree to do it in the woodworking company, where there are special drying equipment, it is quite possible to dry in at home.

The workpiece logs usually make in the spring when the trunk has not started to gain moisture from the soil, that is, before thaw. This is usually March a month. Naturally drying lasts from several months to a year, depending on the variety of wood.

Why is it important to use only dry material?

The raw tree will surely crack as soon as the bark be removed, if, of course, this is not planned for your designer idea. Some breeds strongly change the form with incorrect drying.

A dry tree should be well cleaned and ground, it does not interfere with the light layer of texture varnish or verses to give greater texture to the product. If the circle diameter is large enough, and the part of the root system has become a reliable support, the table is almost ready. The upper part needs to be good and covered with varnish. Here is the perfect design for a laptop.

Dimensions

If you wish to make a large dining table from a solid log, you will have to work a little hard and adjust the longitudinal section in the middle of the trunk. It turns out two almost the same halves. If the width of one part of the meter or more, and the length is at least one and a half meters, the base for the dining table is already there. You can leave the bottom of the semicircular or align, cutting off the semicircular lower part.

It remains to build reliable legs and handle the surface of the table in any convenient way. It is not necessary to make the table absolutely smooth, especially if the valuable wood species were used. Moderate irregularities will give an extra charm.

How to use the second half of the log?

A little extra effort, and is ready for a strong bench for the table. If the width of the log is sufficient, then two strong benches for both sides of the table can be obtained. They are best combined to connect to the overall design, or make two separate strong seats for several people. The bench, of course, will have to align and remove all irregularities. Ideally, it's good to open and cover with varnish or verse.

Colors

Do not too digest on the color of wooden products. If you decide to strengthen the natural color, then the coffee tones are suitable for any breed. Optimally use water-based varnishes and paints. They are less toxic and well interact with wood.

It is quite acceptable to use unpainted materials with natural colors. Cast iron without additional coating and a tree of natural color will become an original decorative solution that does not require additional color shades.

Unprocessed aluminum and dark wood species are very successful. Natural silver color and dark oak texture look very original. Elements with natural colors are well suited for additional decoration.

But the components are made of iron, unless, of course, it is not a stainless steel, in any case you need to paint. Even if your table with iron legs will be constantly indoors, the metal must be coated with any color composition. Iron is subject to corrosion even in dry and warm rooms and requires painting work.

Tree painting

When using wooden streams in the open air, it is necessary to take color not only in decorative purposes. A good coating will protect the tree and extend its service life. In this case, special compositions are used for outdoor work. Color gamma can be any. Most acceptable all the same dark coffee shades.

Useful little things

  • The wisest thing is not to hurry. Any work requires thoughtfulness and accuracy of execution. Do not put any deadlines. Do work when there is a mood.
  • If something does not work, set aside the crawl and return to it after a while. Such work will be only a joy, and you will achieve a good result.
  • Do not mind immediately for the complex project, start with simple work. It is necessary to obtain a certain experience for subsequent more complex crafts. The use of power tools will facilitate your work. Be sure to follow all security measures when working with any tool used for wood processing.

  • Even a small zanosis can become a problem if you have to pay attention to it. Observe safety regulations. Always wear glasses when working with wooden products, in particular, if machining is used.
  • If there is little experience, but there is a desire to make your own hands at least a wooden table in your own home, start with a hike to a supermarket building materials. There you will find everything you need for individual creativity. Designer decisions will be prompted by the materials themselves.
  • First, use wooden blanks that require minimal subsequent processing.
  • Cut all work in the spacious room. A small workshop at the cottage is the perfect option. Coloring should be carried out in a well-ventilated room, even if low-toxic compositions are used. Observe all the necessary dates of drying glued and painted parts.

Advantages and disadvantages

Crafts of own production do not always look perfect. But do not be upset because of this. Small flaws will be compensated by absolute satisfaction from their own work performed. Such flaws can be attributed rather to the advantages. Product industrial production Will not keep warm your hands.

Did you like the article? Share it
Print article
Top