What can be made of automotive tires with your own hands. Crafts from tires for the playground

It is always nice from the barn things to do something useful, and if the craft is also obtained and beautiful - the pleasure is double. One example is crafts from tires. Of these, decorations for a cottage or garden plot are made, different vases and flowers, build children's attractions and even make dacha furniture - tables and chairs.

Floweries from Tires

Let's start with the most, probably simple flower beds and flower beds. Do you think make a multi-tiered difficult? Maybe but not from tires. You take a few pieces of different sizes, paint in bright colors and fold the slide - one to another. So that your slide does not fall apart, fasten the tires from the inside with the help of a screwdriver and self-tapping screws. Two on one connection will be enough. Inside fall asleep soil, plant plants. So that the soil does not pumped out, it is possible to store the tire inside the piece. It will remove excess water, but will not give earth. Beautiful tier flower garden ready.

If you like the flower beds, you can do those. For example, folding the flower club in the form of a chamomile. First lay out and fasten the tires in the lower tier. Fill the ground middle of tires, as well as free space inside the circle. There for a better drainage you can lay a broken brick or other construction garbage, sprinkle the earth a little bit and tamper. On the prepared surface, retreating from the edge more than half the tire diameter, lay the second tier. They are also bonded among themselves, the middle falls asleep with soil, and the core is climbing from above. On the top of the tip, you can plant tall flowers, and on the lower tiers - curb or lowered.

Another option of flower beds in the form of a chamomile is in one tier. For its execution, tires will have to cut.

How to cut tires

In general, manufacturing crafts from tires, they often need to cut. It's not easy. It is less easily easily cut off the side surface from the tread. People with severe hands and good knives Do it manually. Good, by the way, training for the brushes and the entire shoulder belt. If you can cut a knife, lubricate the blade with solidol: the rubber is constantly "jars" the metal, and the blade covered well slides.

Also cut off the sidewall with an electric bolt or a grinder. Cut the grinder relatively quickly, but the stench is worth the wild. Because the grinder, even if it is, they only do the first to feed, so that you can enter the pylon of the electric bike. Further work this tool. For cutting rubber take the blade with a reverse toe of good steel.

If you have to cut the protector, do it with a jigsaw or the more knife, it is useless. In any case, an ordinary knife. Even iron cord can cut the blades from special steel, but it is unlikely that someone wants to urge such an old tire tool. Therefore, they work most often with a grinder. In order not to have trouble, the protector is fixed: always think about security. If the sidewalls are already cut off, the tape tape is rather elastic, it can be squeezed. Cut it will not be solved.

Wheel Vase: Soak tires

If there is a tire with an old wheeled disk, you can make a flower vase from it on the leg.

For this, one sidewall is cut along the tread. And turn out. This is not an easy thing: considerable physical strength and perseverance required. Rubber elastic and expand it from the first time it does not work. If at all at all outdoor side Make notches across the tread. They must be quite deep, but not through. It will also help if there is a depth of at least 5-7 on the edge of the cut. They will look like a fringe on the tire.

Why turn? The inner surface is smoother, and the form may turn out more interesting, especially if the edge is not linear, but toothed. It turns out an elegantly bent decoration.

In detail how to turn the bus, look in the video.

Similarly, you can turn the bus without a wheelbar. The sequence of action is the same. First cut off one of the sidewalls - directly or zigzag. To "petals" were even, they should be placed. Convenient to do it with chalk. By the mark then cut the electric bike or knife (if synthetic cord).

Soak like this: they come to the inner part of the tire, they are taken by the edges of the edge and pull up and on themselves. It is important to achieve the first result: when at least some part arched. If the tire looks like in the photo below, it is already success. It is developed, consistently turning the edge and standing on the part twisted already - so that it does not turn back.

Once again, look at the process in the video. This time turn the tire without a wheel (cut by way with a knife).

Even by itself, such a tire inside out is not bad. If you paint it - it becomes even better. If you wish, they can be combined - different colors, dimensions, differently installed: on the tire or on the legs.

Always beautifully high flower bed. Especially with ampel plants. It can also be made of tires, and several possibilities. In the photo below, two ways to fix cropped tires at different levels. The first is to use hemp for this, to which nails or self-stakes to mount vases. The second is to use fittings - three four rods to wear rubber. Having exhibit at the desired level of the tier, it needs to be fixed, on metal it can be done only with the help of clamps.

It is not always possible to put a rone to the ground: some sites are so mastered as one square meter Allocate problematic. In this case, the people came up with various suspended vases and, too, from old tires. Only a small part remains from the entire tire, so you have to cut a lot ... Best patience. For example, you can make suspended porridge in the form of a dolphin, parrot, rooster and other fish birds. Several ideas see not a photo.

Kashpo from tires - parrot, rooster and dolphin

All these crafts from tires. Only a small part of them - the heads are made of dense foam. Cutting and polling the part of the desired shape, it is fixed with the help of self-tapping screws, lubricated with glue (this is a secret, remember), and after - paint. How to make a parrot from the tire look in the video.

Ledged below step-by-step photoswhich captures the main stages of creating a table or a panphonic from a tire. We will need two more circles from plywood or fiberboard of a suitable diameter, a hemp rope is used for decoration. From the girlfriend, you need glue and adhesive lint, as well as varnish and brush to apply it. To connect circles with a tire, you will need a screw - pieces of 8-10 and each side.

Next, we take the adhesive gun and heating the glue, we apply on the sidewall. If there is no such luxury in the farm, take the glue, which is in a larger tube, such as "liquid nails". It is easier for them with an assembly gun. Apply a strip on the sidewall, stick the hemp rope. So - to the very top.

By the same technology, decorate the lid of the table (Purph). You need to start styling from the middle: We apply glue, put the rope.

End of work - varnish. We do not do well, so impregnating. That's what should happen as a result. If you did a table, you can put the glass - the rope, even covered with varnish, is not the most best coat For table, though beautiful ...

Diversity can be achieved at the expense of the cover. It can be sewed from a closed dense material.

Cute Puff ...

You can connect - a large binding looks interesting.

Knitted Case of Large Mark - It looks interesting

If you want to sew and knit, you do not want to use, you can use old knitted things cut on strips. They are cut on long stripes with a thickness of 3-5 cm, fed into the balls then wrap the emblem. It turns out interesting, especially if several colors are combined.

If you need a paddle a higher, twist two tires together with self-draws, and in this form work with them further.

For another option, look in the video

The use of automotive tires in the country is also justified as the use of plastic bottles. It is a cheap and quite practical material for creating a wide variety of items and things that may be needed for labor, relaxation and even design landscape.

More recently, we talked about crafts at the cottage from the remedies, created tops of the most interesting things and determined the rating and exclusive ideas of the use of old and worked things to create something new. We used wood, metal, plastic and glass bottlesBut today it has come to pay attention to no less interesting material - automotive tires. It is not easy to get the tires for use in the country, and it's not difficult to work with them. Therefore, we propose to pay a little time and explore new ideas. Also, you immediately ask you to actively participate in the discussion of the article, because the opinion of each reader is very important for us!

Soft baffies

For comfortable seats at the cottage during the rest, you can use automotive tires. To do this, they turn into tissue tapes or straps, which are simply intertwined with each other. There is nothing complicated in such a technique, and we have established a practical method that it takes a literal hour of time.

Use for production " cottage furniture"You can tires almost any diameter and size, but try to choose not the most dilapidated so that the reinforcing fibers from the main material do not bring you trouble in the form of scratches and cuts.

Donkey with a wagon from tires

Remember, not so long ago, we studied in detail the original works of some dacms - in the country? They were made of timber, logs, branches and other materials that can not be bought, but just found in the country. Today, we suggest considering the model of the horses in the new light. It will not be a horse, but a donkey from the car tire.

On the production of such a creature takes only two auto strokes, which just occupy a place in the garage or shed. By applying a sharp knife, a little knitting wire and fantasy, you can build a pretty jewelry for the lawn in the country during several hours. In addition, it is quite realistic to create not only a small donkey, but also a wagon, but in it, for example, to install flower pots, thereby creating a mobile flower bed.

Parrots from auto strokes

Starting a conversation about exotic birds, we immediately imagine the image of a similar masterpiece.

In view of the present art, the hand to which the professional attached. But if you look at, then there are no difficulties in the production of such birds. If you systematize work, make a simple drawing and take a high-quality instrument in the hands, you will only follow our instructions:

• Make a slice tire on both sides, leaving only a small strip of the inner circle. That is, you get a solid small radius of the product, but a large divide in half;
• Next, spend a cut along a small radius, on both sides, at the expense of which you get the necessary shape from which decorative works can be carried out;
• At the edges of the cut, you should make the head of the parrot and its tail. We dissolve the source material for several bands and focus them at the end, and also cut out of the rubber, the likeness of the parrot head, only in shape;
• The rest makes bright colors, with which a piece of black rubber acquires the desired shade and explicitly the image of a beautiful bird.

Tsarevna-frog from wheels in the country

Are there a few old tires? Then on the territory of the cottage you can create a very pleasant and cheerful picture - a frog sitting on the edge.

The whole process takes several hours, in terms of costs - you only acquire paint for design.

Initially, laying two tires on the ground, a friend near a friend, closely. On top of them, the third is stacked, so we get something that resembles a pedestal.

We feed the tires of the earth from the inside and go to the design:

• Two shorter and thick branches and two long, but more subtle, form paws frogs;
• Special shape wooden bars, cut that can be equipped with knife, complement the paws;
• From plastic bottles, cut your eyes and the crown for our cute "princess", the rest is just trying to paint.

Tire crafts with their own hands (video)

Flowers from auto stakes

Some time ago when we talked about interesting ideas For summer cottages, we stayed on creating flower beds from tires. Today we have only a reminder, as well as the call to use not only the rubber part, but also metal rims from the wheels, on the basis of which you can build reliable and durable coasters for the flower.

Figures of birds

Decoration for gardens and lawns can also be made of old tires. Today we have a pretty cute white goose, on the production of only one car tire was spent.

As you can see, it is put on the side and circumcised, its main part forms it decorative decoration Slices, and cut part forms the neck and the head of the bird.

From alone, rubber is very difficult to make your head, and therefore the tree is used for stability and shape.

After forming an image, painting a new garden figure.

It is also noteworthy that as a result we get not just a garden figure, but also an excellent flowerub for planting decorative plants.

Pool of old tire

Of course, in order to make even the smallest pool, you will need to take a serious size tire, for example, from the tractor or a large loader, and so on.

It is difficult to work with a dense material, but it will not be necessary to produce cutting and it will not be necessary, because we have a ready-made form that can be filled with water. It remains only to make a reliable bottom so that when filling such a pool, the water immediately did not leave.

Initially, you should select a place to be installed, it is made with a dense material that will create a base. It can be an explorer or clay, but maybe the usual lawn land with grass, the main thing that it be established.

Now we settle on the installation site a piece of awning or a special film, which is used for the device of artificial reservoirs at dachas. On the perimeter of our wheel, degrease the awning and richly lubricate with special glue. It can be glue for rubber or even universal "velcro".

The tent is stacked the wheel, the awning presses its weight, and in this position it remains for a day. After that, you should additionally treat glued seam with sealant from the inside and outside. Through one more day, you can pour water inward and use a fully sealed tire from the special equipment in the form of a dacha pool.

Track in the country

If there is a small bias on the territory of the cottage, the descent to water or transition through the ravine, use to ensure maximum comfort on the path of movement you can tires. With their help, durable and durable steps are created for which it is convenient and safe.

Original Garden Figures

Some options we have already studied, but now we go to real fabulous characters that may appear on any dacha.

First of all, we present bears from automotive tires, which are organically formed and installed, are decorated and endowed with a special way. As you can see, next to them and pretty flowers from plastic bottles, which we spoke recently.

In turn of the caterpillar, the easiest of which is really not. This is a pretty figure of vertically installed tires that fit tightly to each other in a slightly different height. Painting and simple design helps to complete the image.

At the very beginning of the article, we mentioned wooden horses and showed you a donkey from the auto strokes, but now we have come to a horse from the old tire, to the structure of which and complete decoration you will have no more than a couple of hours. Agree, it's not so much to create a favorite summer toy for children or grandchildren. A shape is formed very simply - a tire is installed in a small hole, which is concreted. Next, it is drawn up and tinted, complemented by head and mane, and immediately after that it becomes a pretty object in the exterior of the cottage.

Furniture from auto stoves

Oddly enough, but the auto strokes can play the role of not only original decorations for the landscape of the country area, but become and really practical furnished. We have already considered one of these examples at the beginning of the article, but here we had a few very very successful ideas.

A good country kit is presented to your attention, for the production of which tires and a metal frame are used. But as you could notice, it is not simple, but wicker furnitureTherefore, interest in it is increased.

A similar kit and just below, but it is already soft furniture For giving. Naturally, not the most practical option And far from the limit of dreams, but very pretty!

Using tires in practical purposes

In conclusion, we present you an idea, homemade septica or a special pit for cottage toilet From old tires. In details to tell about the construction of a toilet or cesspool, we will not become, since the site already has thematic material, and simply imagine another useful direction in which you can use tires from cars.

What can be made of automotive tires (video)

Human fantasy has no boundaries, and the desire to achieve a maximum in practicality in the country area is often the main goal. That is what we consider the reason for the development of new opportunities and the implementation of even those ideas that initially seem not very pathways. Today we have introduced you a considerable list of decor, furniture, and even sewage elements from old auto strokes, and therefore we are waiting for your reaction to the material just below, in the comments.

Crafts for giving from automotive tires (20 photos)

Reviews and comments

Lydia 20.03.2014

Yes, of course ... but all car tires and cameras do not dispose of it. Tires should go into recycling. First on the furnace fuel, and then on gasoline or solar and cord. In the cooking of furnace fuel on gasoline can help.

Sasha 04.10.2014

By the way, he saw a bunch of fakes from the tires on other villages, but he never thought to do this, because it was lazy, and I didn't want to do something, but now I will make a couple of curious fakes in order to decorate my country house)

Igor 07.12.2014

Flight of fantasy, of course, pleased. And yet, the attitude to such use of the tires is cool - this kind of aesthetics is still doubtful. It is interesting only in cases of completely unexpected and original that the species that applications.

Dmitry Belokonovon 21.09.2015

Very original, a lot of things learned for myself, I liked the idea with the aspirations, not only nice, but also functionally, better than carry chairs from home, or put an old shop. And the steps of the tires are also interesting, just there is a descent to the garage, and you have to bypass him behind the courtyard (it is very sharp), now I'm thinking about itching the descent to the tires so that the time saves and do not make a huge hook!

Alla 03.10.2015

On these photos, the shapes of the tire look interesting. I saw several similar figures from the neighbors, and I didn't like them very much: somehow it looks. But the idea of \u200b\u200bsteps from tires interesting and functional. We can do the descent to the river to do so. True, I do not know where so many tires take.

Elena 10/14/2015

And in our city, such decorations on the courts in kindergartens are implemented! Heroes of cartoons: Krosh, Nyusha, Cheburashka, Masha and Bear! And the kids really like, and my reg.
At the time of my childhood in kindergartens, old tires only under the flower beds were used or burned to the ground in the ground, type, sports shell such. (((Is it really not enough for more fantasies? Because no supernatural materials are required for such crafts?
At the cottages, we have not met this yet. I think people do not want such structures to put, because at 5 - 6 hundreds of land under the planting barely enough. Alexander 11/27/2016

I always liked to make crafts with your own hands. The garage, I have fully equipped for one goal - make crafts. Some time ago, I began to notice how I was in the city, I begin to put such crafts on the flower beds, in kindergartens and other cultural places. I liked this idea and I began to do differently soda from tires, etc. I think that now, I will make black swans from the tires. When everything is ready, I will unsubscribe what happened.

Karrina 01/16/2017

And please tell me what better paint use for such " folk creativity"?) To do not flow and the smell did not have a sharp, the choice now there is a lot of options, I would like to do not get enough sleep for a month, I do not mean anything in this, and the tires remained from the old father's car, children want to experiment) I want In order not to stickily in respirators and cost without consequences ...

Vova 02/14/2017

Class! We are waiting for the continuation of the digest of products from the tires!

Masha 03/22/2017

Here are these swans of their tires, we made four pieces and put in the garden. It turned out very pretty, and the process itself is simple. Only with the wings we did not bother, it turned out Belubee. And the photo simply conquered parrots, but it is very subtle work and in terms of cutting out of rubber and in terms of painting. Our husband with her husband crazy handles so far is not capable of)

Masha 15.08.2017

I have never seen crafts that really beautifully look at the country area, as it is so better to put more colors for me or let a smooth lawn be, than to litter a plot.

Add a comment

To make something beautiful and useful things are always nice. A visual example of such creativity is beautiful flower beds. It is easy to build them, and the benefits of them are huge. But on this fantasy of country masters is not limited. Of the old wheels, which often simply roll on the road and pollute the environment, they make outdoor furniture, sculptures for the garden and even remove small children's towns.

Such a simple and unsightly look at the first eye, as old car tires, in fact, as if specifically created in order for each dachnik to feel like a real artist and decorate his plot with real designer flower beds and original copyright sculptures. Cut from tires can be, without exaggeration, anything. Such crafts on a par with those that are made of plastic bottles round year The owners and guests of the cottages will please, and most importantly, they will not require special financial investments.

It is also nice that the benefit from the idea of \u200b\u200bmaking crafts with your own hands from the tires is double: on the one hand we will dispose of a wheel that contaminated the environment, and on the other we get original garden decoration or flower bed.

Crafts from rubber, used tires, are affecting the variety and how much the fantasy of their authors. Here are the ones that are most common:

In the photo - flower beds from tires

Small flower beds. The easiest way to manufacture a bed of tires is to leave the tire as it is, it is only bright to decorate it and fill the earth. Nothing difficult. Even a weak woman or child will cope with this, and such a flower garden will look great.

On this photo - Cups made of old wheels

Floral flower beds from old tires in the form of various items. Make them harder. The tire is cut into two unequal parts and the one is more, turned inside out. It is worth noting that the edges of the tires can be made of various shapes, the whole thing is only in fantasy and agility of hands. In such a technique there are flower beds in the form of a mug, flower, vases. A huge rubber cup of tires looks very funny. And some craftsmen, thus, build a whole tea service on their plot.

Turtle from old wheels

Flowers and sculptures in the form of animals and fabulous heroes. Funny tire frog, good gnome, mysterious unicorn, beautiful swans, three-headed dragon, turtle, luxurious carriage, huge phone - easier to list what is not made from this available material. The only condition is to think over the composition from the very beginning so that there is no unpleasant surprises later.

In the photo - multi-tiered flower beds for flowers or berries

Multi-tiered flower beds from multiple tires. The simplest performed is a three-core, but the number of parts can be more. There are several identical or different tires, put on each other or in a checkerboard order. Speecually looks at a tire well, stylized under the real and equipped with all the attributes inherent in it: a chain, a visor, a bucket. Such a flower garden can be used as a vertical bed for growing berries and vegetables.

Tire beds for strawberries

The flower bed for strawberries from the tires will take at least a place and give a rich harvest. It is perfect for the cultivation of seedlings, greenery, pepper. From such a flower, you can make a fence for the bush of raspberries or currants or make them a few and distinguish between the vegetable garden to cultural zones. It is worth mentioning that the tire well often make not only decorative, and they mask the drainage pit or septic tank.

Experienced masters And the craftsmen know a lot of secrets that help them create garden sculptures and flower beds with their own hands. They understand the best of all, how to make unique and unique copyrights from an old nobody. Here are just some of these secrets:

• The best tires are suitable for work, as the rubber on them is softer and easy to cut it. But for their lack of absence, domestic products will rise. In principle, they are fairly easy to process and allow you to give crafts from them different shape.
• Tires intended for operation in winter roads, more pliable, lungs in stripping and convenient in processing than those used in summer.
• The longer the tire was used and the more she was worn out, the more thinner, softer and the easier it will work with it: cut and turn.
• Before proceeding with the creation of the crafts, the material must be prepared: thoroughly clean from dirt, but before painting degreases.
• For cutting of automotive tires, use a sharp knife, with a subtle volat. Check how well it is sharpened, you can spend the blade by a notebook sheet, holding it on weight. If the knife does not cut or bloom the paper is not acute enough.
• Cutting a car tire for garden crafts It is more convenient if you periodically lubricate the knife with machine oil. So it will be easier to enter the rubber. The oil is suitable and spent.
• When you need to cut some curly elements, markup is applied to the bus. It will help achieve a more accurate and accurate result. Apply it is most convenient than the usual white chalk, as a last resort, the marker.
• From what paint to paint rubber, the durability of crafts depends. For old wheeled tires, both automotive paints and any paints for street work are suitable.
• Before painting the tire, its surface is recommended to be primed. The primer with the addition of a small amount of PVA will strengthen the strength of the coating and will reduce paint consumption.
• Paints in aerosol can accelerate the process of staining to 20-30 minutes, and the stainable layer itself makes more uniform.
• Decorative finish can be made of girlfriend. For example, plane the surface of pebbles, bottled fragments, or lay out pictures of colored covers from plastic bottles.

Collect the flowerbed from the tire is better not only with external, but also from the inside. So they will look more aesthetically, and black rubber will not break from the inside.

Of course, each wizard has their own secrets, and all of them are unrealistic. And when you do this exciting business - a tire sculpture, they will certainly appear with you.

Several master classes for making crafts from old tires

As mentioned above, crafts from tires are diverse. Them appearance And the purpose is limited only to the fantasy of the wizard. We suggest you familiarize yourself with the basic models. After reading them, you will learn how to make a flowerbed from the tires with your own hands and you can create original, unlike other and useful garden accessories themselves.

Simple flower bed

A small flower bed, made as a chamomile from one tire - the simplest basic model. Such flower beds can be done somewhat, arrange them hardly and decorate the approach to the house. Sometimes they are placed on asphalt or paved tiles.

We need:

1. One old tire.
2. A sharp knife.
3. Marker or chalk.

Marker are placing a cut scene. We will cut the tire on them, from thickening to thickening.

Before cutting the tires, make sure that they do not have metal cord that can spoil the knife. Usually they are inserted into the tires for trucks.

We cut the tire throughout the circumference with smooth zigzag petals of any form on your choice (triangular, oval, semicircular).

I turn over the tire and work with its back side. Driving a knife along thickening, cut the circle from the back side.

Then throughout the circumference inside the tire approximately every 20-25 cm we make transverse cuts from the cropped edge to bend (the end of the tread).

After that, the tire must be turned out. Flowerba is ready. It remains only to paint it, giving it a more attractive look, fill the earth and plant plants.

For greater visibility, see the following video:

Garden Vase from Old Wheel

From the old wheel in a short time you can make a beautiful garden vase.
Such vases look better in a pair in front of the house, on different directions of the door or a porch. Consider a step-by-step master class in their manufacture.

We need:

1. Tire with disk.
2. A sharp knife.
3. Chalk or marker.

With a chalk or marker along the entire frontal circumference of the tire, place a zigzag line, on which we will cut. Thanks to her, the Vase will look like large flower With a lot of petals.

Cut the tire along the placed line with a sharp knife. To facilitate the process, the knife is periodically loose into the machine oil (suitable and spent).

After the wheel is cut, check whether it is not left to the end of the cut plots, and proceed to turning it. It is better to do it together with an assistant, not in a hurry, in parts.

After we managed to turn the tire for future flower beds, it turned out that there is a camera in the wheel. It must be cut and throw it out.

Vazon ready. Its bowl turned out of the main part of the wheel. Disk from tire no need. It serves for a vase with an elevation and stand, and the tire remains at its base is an extra support.

We can only clean, degrease and decide how beautiful to paint our new garden vase. When you fall asleep in the bowl of the earth, do not forget to put the gasket on her bottom, so that the Earth does not pour and do several holes in it for draining water.

Video Instructions for the manufacture of a vase:

Swan from the old tire

Most popular garden sculptures from tires - swans. Usually they are placed near the artificial pond, which gives the site a stunning view. You can land the grass and in the bird itself, then the impression will be created that it looks out due to vegetation. Make it will help detailed step by step instructions with photos.

We need:

1. A sharp knife.
2. Electrode to do the holes for entering the knife rubber.
3. Grinder or file.
4. Electrolzik.
5. Chalk or marker (better still marker).
6. Wire 5-6 mm in diameter (rigid, to give the shape of the neck "Swan").
7. Plastic clamps (for giving the shape of the head).
8. Roulette.
9. Gloves.

According to the scheme, we place on the surface of the bus surface of the future swan to the following video, in which the author uses the size of inches, calling them in the international measurement system - Inch. Inch (1 inch) \u003d 2.54 cm.

The accuracy of markup depends on how beautiful and neat our sculpture will turn out.

Start cutting out. In the initial section, the drill drill 3-4 holes at a distance of 3-5 cm and cut the tire between them with a knife. Insert the jigsik into the resulting section and start cutting the swan.

After all the contours are cut off, turn the tire. We try to do it carefully, since careless movements in the most subtle places can be broken.

To the figure of the bird looks more neat, all sections are smoothing along the contour of grinding.

To give a shape, swans insert wire into it. For this, in the center of the neck and to the end of the body every 20 cm drills holes. We put the wire and fix it in the holes with soft brackets.

We form your head. We make longitudinal feeders and holes, as shown in the photo and with the help of the same wire or plastic clamps give the swan's head.

Our tire swan is ready. It remains to paint it and make a stand.

Swan can be painted white or not to paint, leaving black. Kryv make red. Very nice looking swans in a pair: black and white.

No soft stand rubber swans Stand will not be. As it, you can simply take any bus and paint, for example, in a blue color. Thus, it will symbolize the pond. And you can not be lazy and make it curly.

Figure stand is made similarly. Location on the bus tire, according to which we cut, cut the tire on it, turn and paint.

In a similar technique from tires, you can make any figures: animals, birds, fairy creatures.

But if you do not want to mess with complex markup and sharp, you can do it easier. For example, assemble from the whole tires of a cute frog.

In the photo - Flowerbed in the form of a frog

A frog made of tires is very simple. From one or more tires rarely collect the body and head, from small wheels, for example, from a baby carriage - eyes, and from rubber cuts of the paws.

Flowerbed Romaista

The decoration that is being done is easier than this flowerba is difficult to come up with. Despite the fact that there are several automotive tires for her, it is possible to assemble it literally for 15-20 minutes, it looks pretty, carefully and will never be superfluous.

We need:

1. Three old tires of the same size.
2. A sharp knife or Bulgarian.

All tires, pre-denotably sections, cut in half. Before cut to find out if metal cords are in rubber. The knife will not take them, so use the grinder.

To give the future flowerbed aesthetics, you can paint the tires. Do it better in advance, immediately after cutting.

Content

Contemporary applied art has no boundaries, therefore, for its implementation, any healthy material is suitable. So, for arrangement cottage plot, household territory of the house or playground create decorative products from tires. From rubber it is easy to make original flowerbeds, vases, furniture items and figures in the form of animals.

How to make crafts from wheeled tires do it yourself

In the hands of a creative person, a car tire can find the second life as a landscaped decor. To create a craft from tires, you only need to have a fantasy, the desire to create and the tools: a sharp knife, household gloves, paint and chalk for circuit marking. Before the start of the creative process, it is advisable to make a sketch of the future subject on a piece of paper, and after already placing the contours on the tire. The manufacturing process does not take much time, the instructions are elementary, and the masterpieces are obtained.

Car rubber is ideal for open-air spaces, because it easily transfers any weather conditions. Charming crafts will be able to decorate your cottage or playground for several years in a row. However, the rubber is too heated in the sun. This fact should be considered when creating furniture on which you plan to relax in the summer season. Crafts from old tires practically do not require care - they need to be occasionally washed with soapy.

Interesting crafts made of tires for the garden and garden do it yourself

Modern dachas seek to show creativity not only in the garden, but also during the design of the nice territory and the garden. They make their plot more well-kept, beautiful and original. Crafts from automotive tires can carry not only decorative character, but also to become practical and useful thing For the farm. The auto stroke is a practical technician material, which is easy to make an original thing even a person who has never faced his hand work.

The charming figures of animals are created from rubber tires. Taking one or a couple of tires, making a slot in the right places and where you need, bent, you can get a bear, a frog, giraffe, caterpillar, crocodile, donkey, a dog, an elephant or a turtle. If you wish, you can create a multiplication hero in the form of minion, Luntik, Matryoshki, Machine or Fixikov. Additional details of the crafts are made of plywood. Upon completion of the creative process, crafts from tires are painted in bright colors and put in the yard to joy to everyone.

If you do not know what you can make from ancient tires, start with the flower beds. Fencing for flowers from auto strokes are the easiest way to decorate the garden. If you show a little fantasy, cutting and turning tires, you can create original kashpo or vases where the soil is poured and plants are planted. Sades often use tires as a compost well, placing one tire to another. Attractive swings, sandboxes, steps, fences, chairs - for these products, machine tires applied to the second life.

Cover Chair

Tires can be adapted for interesting furniture, which is necessarily useful in the country and will become an attractive novelty for all guests. It will not be a rubber construction, but a comfortable leisure object for a terrace, veranda or open space. To create a chair from tires, you should take:

• old car tires - 2 pcs;
• flexible Phaneur - a piece of 100x90 cm;
• porolon - a couple of pieces: thick and thin;
• felt;
• tools: screwdriver, screws and stapler for furniture.

If all the necessary components are at hand, then it's time to proceed to the immediate manufacture of garden furniture:

1. One car tire is placed on another, they are fixed with self-draws.
2. At the bottom of the potential product, that is, to the bottom tire, the corresponding felt piece is attached with a stapler. Due to this element, the chair can be easily moved along the flooring.
3. Plywood, which serves as a back, bends and fixed on the tires using self-press.
4. After that, you need to cut the circles from the foam rubber. One make out of thick material on the outer diameter of the tire, and a pair of others is thin. A large circle is shoved in the inner part of the tire, which is placed on top. Thin circumference are placed on top of the auto strokes to give the product comfort. Details are fixed by the stapler.
5. The back is processed. Thin foam on Faneur is thrown.
6. Last barcat - Case from quilted material.

Pinds of the tire do it yourself

What can be made of old tires? The exclusive solution for the cottage and house will be the pen. It can be done in a simple way, but for this you should take:

• car tire;
• durable thread in the form of a twine or a hemp rope;
• a piece of plywood to have enough for a couple of circles;
• tools in the form of self-tapping and adhesive pistol;
• lacques for coating.

Tire Puff will become interesting designer decision For arrangement modern interior, After all, the piece of furniture is not only beautiful, but also comfortable. The manufacturing process is as follows:

1. The circles of plywood are placed on the bottom and on the top of the tire, fasten with self-drawing.
2. Be proceeding with the top of the Purphic, which will consist of the twine. Thanks to the adhesive gun, a rope or rope is fixed to the plywood of the coil behind the turn on the principle of snail, starting from the center. So they do until the tire closes completely.
3. Upon completion of the creative process, the twine is covered with varnish, which will protect the product from negative impact Factors ambient, such as moisture.

Swans from tires for giving

Animals, birds and water inhabitants from car tires look amazing. So, the chic works of art are swans from used tires. For their manufacture should be taken:

• old tire;
• white chalk;
• paint (desirable water-level);
• lobzik, drill, screws;
• plate.

The process of making crafts is not the most complicated, but requires consistency and care during operation:

1. Sketch on the prepared tire, drawing a swan's head in the form of a rectangle 9x2 cm, starting with beak. Then they draw the neck on the tire, which is conducted from the head and takes more than half of the tire circle. Straight lines draw carefully to not fall into the slice. The tail line will be in the area of \u200b\u200bthe beak and will take approximately twenty centimeters.
2. Start cutting the swan, which carries out a drill, and then the jigsaw.
3. Turn the bus, giving the silhouette of the swan. The widest part will be a support that is turned into the inner side.
4. The head and neck without a solid stand will not hold on, so the plate should be attached to this site.
5. When the product is ready, it's time to proceed to painting.

Decorative crafts from wheels for the playground

What can be made of old tires on the playground? There are a lot of ideas that reincarnate the subject to the beautiful items to decorate the courtyard area. From old tires, you can decorate the playground, turning it into a fabulous town, where the kids will always be fun and interesting to spend their leisure. Winged swings, mini sandboxes, beasts, cartoon heroes made of tires will become a colorful addition to the recreation area for girls and boys.

Sandbox made of tires

Games in the sand - a favorite occupation of kids in the playground. However, not every courtyard can boast an interesting sandbox. A comfortable and beautiful sand tank can be made from a kamaz tire. To do this, lock the rubber on the selected area, thoroughly paint and fill in sand. The process of manufacturing the sandbox can be done with the child, believe me that the baby will be very interested in painting a future sandbox with different colors.

Children's swing

From the old machine tire, you can make not only a beautiful sculpture, but also a children's attraction. So, swing from the automotive tire will allow the child to have fun at the cottage. It is worth noting that they are less traumatic than wooden and metal models. There are many options for swings from tires, but starting standing with simple. First thing:

• prepare an old machine bus;
• take a sharp knife;
• find the rope or chain;
• then find a solid twig on the tree that will serve as a support.

The step-by-step process of the homemade swing device does not represent anything complicated. Initially, at one end of the rope, make a strong loop, which is transferred through the selected bitch. The second end of the rope is skipped through the wheel and start in the loop. The swing to hang vertically, perpendicular to the ground at the level of ninety centimeters. The product is designed not only for children, but also on adults with moderate weight.

Sun of tires and bottles

Sun of the bottles will decorate any playground or garden. To make such a homemade, a machine bus will be required, a piece of plywood, self-tapping screws and half-liter plastic bottles that will serve as races. To create a one-piece design, you need to knit the plywood on the tire, to fasten the bottles around the circle to the outer side, go through yellow paint a couple of times, and on the plywood to draw the face of the sun.

Video: What can be made of tires

Crafts from machine tires are an affordable and beautiful decoration that can be made independently. In the skillful hands of the wizard, unused car wheels are stopped into charming sculptures. Watch the video step by step instructions And you will understand what you can do from tires. If several unsuitable tires were lit in the garage, then do not miss the opportunity to give them a second life, creating several works.

Sometimes for car owners, the disposal of old tires turns into a real problem. But creative designers know exactly how this problem is solved, and they offer a huge number of creative ideas on the use of old auto strokes. Two dozen is collected in this review, but what are the original and practical ideas!

1. Little sandbox

Car tire big diameter You can use to create a mini sandbox for children. To do this, just attach a plywood bottom to the bus and fall asleep sand. Also for convenience, the sandbox can be equipped with a wooden lid, which will protect its contents from the wind and rain.

2. Bedside Tumba

From a small tire, a pair of circles of plywood and wooden legs can be made a wonderful tumb. And so that the product acquired an aesthetic look, tightly wrap the tire with a rough rope and paint the legs in bright color.

3. Lenhing for pet

Thoroughly washed and neatly trimmed automotive tire of any diameter will become a great basis for creating a comfortable bed for a cat or a small dog. Complete the product homemade mattress From the circle of plywood, foam rubber and a bright fabric cover.

4. Decorative well

Wearing old tires can be used to create a wonderful garden composition in the form of a well. To do this, paint the tires in any bright color, attach a circle of plywood to one of the tires. Fold the tires to each other so that the latter turned out to be that with a plywood bottom. Of wooden boards Make a roof frame from slate or professional flooring. Inside the well, put pots with flowers, and also squeeze one of the pots on the central beam of the roof.

5. Puf with a secret

The original ottoman made from the old tire painted in a bright color, with a bottom of plywood and a wooden lid that performs the function of the seat and converting this pouf into the storage system.

6. Flowerby

Unnecessary tires, with a screw-fitted bottom and wooden legs, are perfect for the creation of wonderful flower beds that will become original decoration Garden.

7. Rack for toys

A small wall rack that can be easily made of painted in a bright color, an unnecessary tire and several wooden shelves, perfectly fit into the interior of the nursery and is suitable for storing small toys.

8. Track

The track made of several, covered in the ground and planted with a lawn, automotive tires, will become an exquisite decoration of the garden and its practical detail.

9. Suspended pot

Painted in a bright color automotive tire can be used to create an original suspended porridge, which can be decorated with a door or tree in the garden.

10. Frame for the mirror

From the bike tire, neatly painted in white, it will turn out a very unusual frame for the mirror in the bathroom or hallway.

11. Headsette

Wonderful furniture headset, which consists of four chairs and a coffee table made of unnecessary automotive tires.

Video Bonus:

12. Shelves

Small shelves made from car tire pieces perfectly fit into the interior of the children's teenage boy.

13. Table

Charming coffee table With a place to store various trifles, made of automotive tires with soft tissue trim and plywood lid, covered with the same cloth, perfectly fit into the interior of the women's living room.

14. Stool

A low stool with bright pompons, which can be made from one single tire, two circles of plywood and the most ordinary wooden legs, will become a creative detail of any interior.

15. Chair

Several unnecessary automotive tires can be used to create a comfortable chair, and to give it a noble and attractive view will help the braid from the twine.

Video Bonus:

16. High table

Chair from parts of automotive tires.

Parts of automotive tires can be used to transform wooden frames of old chairs. New chairs are perfect for the arrangement of the summer patio, and also fit into the interior of the urban apartment decorated in an industrial or rustic style.

19. Upgrade Stepes

In order for the staircase to the street in the winter, it remains safe, its steps can be decorated with slices of rubber, carved from unnecessary automotive tires.

Video Bonus:

Especially for those who did not find their own among these ideas.