Facade connector for PVC windows. How to independently put a plastic window
Our company offers expansion, connecting and coaching profiles for window companies, KBE, Veka, Rehau analogues.
PVC Stand Profile
Connecting Profile PVC
The connecting profile is designed to connect the elements of window, balcony and door boxes, which consist of several window frames. Such profiles allow you to dock the profiles of window frames under the required angle, which is actively used in the glazing of winter gardens, partitions and the windows of large sizes and complex structures. We offer connecting profiles analogs of KBA, REHAU, VEKA 0 degrees., 90 degrees. and with a variable angle.
PVC expansion profile
PVC expansion profile for windows is used as an additional profile when it is necessary to increase the original sizes. window box, for example, when insulating or finishing the ceiling and balcony walls. We offer analogues of expansion profiles of KBA, REHAU and VEKA width 30, 45 and 60 mm. The recent profile is not intended to enhance the design, its main goal is to expand the possibilities of architecture of balcony, door or window buildings.
30mm, art. 144.
45mm, art. 545.
60mm, art. 546.
Expansion profiles for KBE 70mm
30mm, art. 360.
60mm, art. 455.
We buy the waste of PVC window production.
For more information, contact the managers of our company.
Source: http://polimerplus.info/profili_dop
Dobly profiles Rehau
Public Profile (Dobor, Navigator) - an additional profile element to increase the dimensions or enhancing the framework design.
Application of fair profiles
Doblyar profiles apply:
- to compensate for the width of quarters of openings and reduce the gaps between the design and the slope
- to increase the width of the frame and the installation of various window equipment, such as closers or remote frames
- to increase the width of the frame and compensation of the thickness of the adjacent to glazing elements, for example, heat-insulating plates
- to increase the stiffness of the structure
Dimensions of fair profiles Rehau
DOPGOR RUCHU is available for each type of profile with an appropriate mounting depth - 60 mm (Blitz Design), 70 mm (SIB, Delight, Brillant Design) and 86 mm (Intelio, Geneo).
Step-by-step height - 10, 20, 40, 60 and 100 mm of fair profiles ensures ample opportunities for the implementation of assembly tasks. If necessary, short profiles are joined among themselves in various combinations.
Installation of fair profiles
Installation of fair profiles is made by groin snaps and fixing with connective screws. To ensure aeronautricity, the joint between the profile elements is sealed with silicone, the inner cavity is filled with polyurethane foam, a psil or other suitable material. The ends of the challenges are sealed.
To increase the static characteristics of DOPU, the rheuu is reinforced by a P-shaped, closed or ribbon steel profile with a thickness of the walls of at least 1.5 mm. Plastic and metal profiles are fastened with screws.
Design
Running profiles Reheau have a smooth high-quality surface, resistant to the effects of solar radiation and precipitation. The service life is comparable to window profiles.
Doba profiles are laminized by colored structural films to ensure visual uniformity with windows and doors designs. We offer 6 standard colors in a warehouse program and more than 40 to order (delivery of about 10 days).
Price of fair profiles Reheau
Additional elements for glazing designs
Protunity profiles in glazing designs
Challenge measureer
"Window company Vesta"
Source: http://www.ok-vesta.ru/windows/dobornye_profili/
Profile and components
Proplex ™ profiles are produced on high-tech lines of Krauss Maffei, A + G Extrusion Technology GmbH, TechnoPlast, and the unique properties of plastic are provided by the original formulation of the mixture specifically developed by Chemson (Austria).
Profile Systems Proplex
Today we supply five profile PVC systems for window and door structures:
Comparative Proplex Profile Table
Proplex-Optima.
- Number of cameras in profile 3
- System width 58 mm
- 0.75 (0.641) M2 * C / W
- Window heat coefficient 0,752 m2 * C / W
- Window width 4-34 mm
- Foreground system 12/20-9
- Durable profile 603 years old
- Buy!
Proplex-Comfort.
- Number of cameras in profile 4
- System width 70 mm
- Coefficient of heat protection profile 0.79 (0,701) m2 * C / W
- Window heat coefficient 0,792 m2 * C / W
- Window width 12-42 mm
- Foreground system 12/20-9
- Durable profile 603 years old
- Buy!
Proplex-Premium.
- Number of cameras in profile 5
- System width 70 mm
- Coefficient of heat protection profile 0.84 (0.761) M2 * C / W
- Window heat coefficient 0.812 m2 * C / W
- Window width 12-42 mm
- Foreground system 12/20-9
- Durable profile 603 years old
- Buy!
Proplex Outline
- Number of cameras in profile 2
- System width 46 mm
- Coefficient of heat protection profile 0.55 (0.451) m2 * C / W
- Window heat coefficient 0,632 m2 * C / W
- Window width 4-24 mm
- Foreground system 12/20-9
- Durable profile 603 years old
- Buy!
Notes:
- The reduced heat transfer resistance with the reinforcing element
- In the calculation of the reduced heat transfer resistance of the finished window - a design of 1500x1500 mm in size, double-glazed windows with two low-emission glasses filled with argon:
- the conditional year of operation is a unit of measuring the durability of polyvinyl chloride profiles, conditionally corresponding to one calendar year of operation of profiles in real conditions. The essence of the method consists in conducting accelerated tests of profiles with cyclic effects of variable and negative temperatures, humidity, ultraviolet irradiation and weakly aggressive chemical media (solutions) imitating the impact of critical operational loads, and determining the change in the properties of the material according to characteristic aging indicators (GOST 30973-2002 Polyvinyl chloride for window and door blocks. Method for determining the resistance to climatic influences and evaluation of durability ").
The manufacturer of PVC structures has also a number of advantages of using several proplex systems. First, it is possible to work in several consumer segments, offering a wider product line. Secondly, all ProPlex profile systems are designed to minimize the inconvenience associated with targeting equipment during the transition from one system to another.
Also, Optima, and Premium, Balcony, and Lux, and Comfort have the same accessible grooves of the system 12 / 20-9, which allows you to keep the accessories of one system in stock (most PVC-profile disks-profiles have a five-chamber profile. / 20-13). Also, all systems use the same seals, reinforcing profiles (except for the Proplex-balcony system, for which a special reinforcing frame and sash profile has been developed).
Many additional profiles can also be used for different systems (Erker connecting profile, bottom profile).
And as an additional argument in favor of Proplex windows, manufacturers can now use the fact that during the next tests in the certification body of the State Standard of Russia PVC profile Proplex received a new indicator of durability - a conditional life - 60 years!
Source: https://www.proplex.ru/b2b/content/profil_i_komplektuyushchie/
PVC profile system
In this section we will give a brief description of the concepts profile system and series profiles.
Profile system
Under the profile system, it is necessary to understand the combination of feeding either corresponding to each other profiles, allowing to produce a variety of window and door structures.
Consider the minimum set of profiles that can be described as a profile system:
So, the profile system includes:
- Box profiles (frame).
In the system under consideration, the window and door frame are presented. The door frame in the height is larger, which is dictated by the need to have a higher static design. Also in the system there is a so-called "wide box", which was developed primarily for panel house-building.
- Sash profiles.
The system presents the window (for windows and balcony doors) and the door sash (input and interior doors). Door sash more in size, there is massive reinforcement into it. In the corners, the door sash is not only welded, for greater rigidity and reliability of massive design, special angular connectors are applied.
- Improve profile.
This system presents one type of impost profile, which can also be placed in the frame and in the sash (window and door).
- Strokes.
Depending on the desired width of the window design glass design, we can use different strokes. In this system, there are 3 types: for double-glazed 32mm, double glass 24mm, and under 1 glass.
- Bottom profile (stand profile).
The name of the profile determines its purpose. This type of profile is attached to the frame profile from the bottom of the window structure, we are dripping and the windowsill.
- Connecting Plank (connecting profile).
Required for dusting frames of two different designs. For example, windows and balcony doors.
- Corner connector 90g.
It makes it possible to establish structures at an angle of 90 degrees.
- Pipe and adapter to the pipe.
Makes it possible to establish structures at an arbitrary angle.
- Expander.
In some cases, the features of the opening or design determine the need to apply this profile.
- Shlp.
Used in the manufacture of window designs without an impos
- "Balcony" series
- "Lightweight" series
- "Standard" series
- "70s series"
- "Elite" series
- "Dutch" series
- The so-called "balcony series".
If the customer wants to make a warm glazing of the balcony, then the optimal option will be the glazing with swing plastic structures with a glass. Frames and sash "balcony" series different manufacturers There may be 2 or 3 cameras, profiles less in height and width. Examples of "Balcony" Series: Montblanc Logic, Proplex Balcony
- "Lightweight" series (Economy system) window profiles.
Competition and struggle of windows of windows for tender object orders led to the fact that manufacturers of profiles (in order to reduce cost) began to offer "lightweight" series of specialized systems. A distinctive feature of such series is the thinner outer wall of the profile (2.5-2.7 mm), a smaller height of the frame and sash. As a rule, these series have 3 cameras.
Examples of "Lightweight" Series: Montblanc Eco 60, Plafen L-Line, Schueco AS60
- "Standard Series"
The figure shows the 4-chamber system, some manufacturers offer 3 chamber systems. The thickness of the outer walls of the "standard" systems is usually 3 mm. The width of the frames and sash "standard" series 58-62mm.
Examples of "standard" series: Veka EUROLINE, THYSSEN AD,
- "70th series"
Many profile manufacturers offer such a series a distinctive feature These series is an increased (up to 70-75mm) width of the frame and sash. The number of cameras 3-5.
Examples of the "70s" series: Proplex -Premium, Montblanc NORD 70, Veka Softline, Thyssen Favorit, KBA expert.
- "Elite" series "
When changing the glazing of elite objects, or if increased requirements for the heat engineering characteristics of profiles are imposed. The width of the frame and sash from 70 mm, the number of chambers over 5.
Examples of "elite" series: Veka Topline Plus, Salamander 3D, Schueco Corona Si 82
- "Dutch Series"
These series are characteristic of the presence of a "wide box (115-121 mm.). The series was designed for first of all for panel house-building.
Examples of "Dutch" Series: Montblanc City-120, Weltplast Nord, Extra CBB.
- The window frame gives the stiffness to the window block and ensures its fastening in the window opening.
- The sash required to ensure that the windows have opened parts.
- Impropulating is designed to connect several sash in the window design, while each sash has the ability to open separately. The impost is also designed to connect two double-glazed windows or sandwich panels and double-glazed windows, depending on the window design.
- Shlp - profile, intended for connecting two sash, differs from the imposition in the fact that one of the flaps is obtained dependent on the other and does not have its own handle for opening, it opens with the main sash. The dependent sash at the same time cannot be swivel. Shill connection allows you to fully open the window opening.
- Dobly (expansion profiles) - designed to expand the window with non-standard openings, in cases where the window opening creates an obstacle to the normal operation of the window frame loop, or closes the fully profile of the frame.
- Connecting profile - designed to connect to one block of two window blocks, or connecting the window and door (balcony) block. Also, the connecting profiles are used to create an angular connection of two window blocks and compounds with the carrier metal structure (for example, a pipe).
- The coaching profile is used for the reliability of the installation of the window block and mounting to the window chassal window and waterfront.
- The stroke is used to fix the glass package in the window frame. A seal made from soft PVC, EPDM, TEP, stretches along the stroke length. Recently, a strap with extruded PVC seal is increasingly used.
We looked at the system with a minimum range of profiles, many manufacturers offer a much larger number of profiles in the system (Erker 135 gr., Diverse expansion, different frame height, etc.), but in practice these additional profiles are rarely applied.
Series of window profiles
Each manufacturer of the window PVC profile seeks to expand the range of products offered, take the "Cheap Window" market niches, "standard window", "elite window".
Conditionally, PVC profiles, presented on the market, can be divided into groups:
Using the example of one of the manufacturers of the plastic window profile, we will compare profiles of different series:
The choice of the manufacturer of the profile system and the profile series on which the windows manufacturing workshop will work depends on who you are planning to sell window designs.
Normative documents.
GOST 30673-99. Polyvinyl chloride profiles for window and door blocks. Technical conditions.
Source: http://www.promokna.ru/sistema-pvkh-profilej.
Profiles used in the production of windows PVC
The window profile is a thin-walled hollow profile having several air chambers separated by partitions, most often three air chambers: the main one for the design of the construction with a metal profile, drainage- for water removal, camera for fastening the window fittings. According to the contour of the frame and sash, a seal made from soft PVC, EPDM, TEP, providing sound, dust -, thermal insulation of the window. The following types of profiles are used in the window block:
Door sash.
When installing window and door blocks, additional profiles are applied, such as: restoration profile, nachetner, facing profile, decorative lining etc. As a rule, they are intended for the implementation of architectural solutions, in aesthetic purposes and in order to protect the mounting foam from destruction under the action of UV radiation.
Trimming of all types of profiles are subject to recycling andprocured by the companyPolymer- Logistics
Source: http://ppvh.ru/vidy_okonnyh_pvh_profiley.
Doblyar profiles for balcony windows
In the photo: Dobors are used when installing "Balcony in the window"
Doblyar profiles play the role of additional reinforcing compensators that need to be installed in cases where it is not possible to bring the glazing frame to the edge of the wall or in cases where it is necessary to connect the complex design and give it the maximum rigidity.
Source: https://www.elit-balkon.ru/okna-pvch/profil-ponnyj-dobornye-profili.
Articles
Laconicity and simplicity of the external execution of plastic windows is deceptive because it is quite complicated internal device. The design of this window is based on PVC profile - this is the main carrier element, frame, which provides stiffness, strength and durability of the product. In the previous article "Production of PVC Profile" described the main material and features of the production process. This material contains information about the varieties of PVC profiles.
Types of PVC profiles
Considering in more detail the design of the PVC profile, the first thing that draws attention is the thickness and number of cameras. It is logical to assume that the wider the profile, the better the indicators of the heat saving. However, it is not. Hollow profile, even more thickness, will be less "warm" in comparison with a thin but multi-chamber design.
1. Number of aircases
What are the PVC profile cameras? Plastic windows are made from PVC profiles consisting of one large reinforced chamber, which in turn is divided into several isolated cameras.
Hence the first division of PVC profiles: by the number of aircases.
On the territory of the Russian Federation there are standard GOST 30673-99, according to which it is determined that the number of aircases in the profile for the plastic window cannot be less than 2. Manufacturers of PVC windows today offer construct consumers with 3, 4, 5 and even 6 cameras.
But this does not mean that the larger number of cameras means the best quality window. The selection of plastic windows should always be based on simple rule - The number of cameras should be sufficient to provide heat in given climatic conditions.
Do not overpay the extra funds for the perfectly unknown cameras.
What are plastic windows in Tula?
Optimal plastic windows in Tula, that is, in the zone of moderate climate - this is the 3-chamber PVC profile, the thermal insulation characteristics of which correspond to brick wall 2 brick thickness. While 5 chamber profiles are recommended in a sharply continental, subarctic or arctic climatic belt.
2. Configuration, shape, purpose
The following characteristics of PVC profiles that can be classified is the purpose, as well as the form, size and configuration arising from the purposes. There are several types of profiles in the window block:
- Window frame - The base of the window block. Responsible for the stiffness of the design and fastening in the opening.
- Sash - It is necessary for mounting opening parts.
- Folding doors - Performs the function of opening door structures.
- Impost - Special view of the profile responsible for the connection of several sash with the possibility of independent opening of each sash. It is also used for connecting double-glazed windows, sandwich panels.
- Shlp. - Another connecting profile. As well as the impost is designed to connect the sash, but in this case one sash depends on the other and comes without a handle.
- DOWERS (expansion profiles) - Used as extends with non-standard window opening configurations.
- Connecting profile - It is used as connecting two independent window blocks or connections to a balcony door with a window. Also used to create corner connections.
- Stand profile - Created for a more reliable installation of a plastic window and high-quality mounting of the windowsills and waterproofs.
- Stocker - The profile used to secure double-glazed windows.
Tool:
Perforator, screwdriver, hammer, screwdriver, construction knife, gun for laying mounting foam.
Materials:
Sandwich panel for slopes, windowsill and plugs to it, winding window, mounting foam, sealant, steamer tape, ribbon vapor1mant, psyrals, frame anchor, self-tapping screw galvanized.
How to measure the window?
In order to order a window block, you need to correctly measure the window opening.
Consider the measurement of the face with a quarter (this is such a protrusion, occurs in panel and block houses).
To begin with, fracture the width of the opening (size A) from the street. With the help of probe, make several checksums of quarters (sizes B1 and B2) ( fig. one)
We determine the inner width of the window passage: FROM \u003d B1 + A + B2
Chery Size N. From the popular in the place of contact with the frame (point M) to the upper quarter. With the help of the probe, make several control measurements of the upper quarter (size B3) ( fig. 2.).
We determine the estimated height of the window passage: Y \u003d n + in3
Determine the width of the window block ( fig. 3.).
If size IN< 40 мм
C - (2 × 20) mm
If size In\u003e 40 mm (Fig. 1), then the width of the window block \u003d A + (2 × 25) mmwhere 24 mm is the optimal value of the quarters of the frame for a quarter.
Determine the height of the window block ( fig. 2.)
If size IN 3< 40 мм
, then the height of the window block \u003d Y - 20 mmwhere 20 mm is the optimal mounted gap.
If size B3\u003e 40 mm, then the height of the window block \u003d H + 25 mmwhere 25 mm is the optimal quantity of a quarter frame.
There is no quarter in the window block, how to measure?
Measure from the street. If there is a layer of plaster, set the layer thickness using a narrow screwdriver ( fig. 4, 5.)
Determine the dimensions of the window block:
Window block width \u003d A - (2 × 20) mm,
where 20 mm is the optimal mounted gap ( fig. four)
Window block height: \u003d N - 25 mm (fig. five).
Motion and windowsill
L. externally from. - the length of the external slope, L. Otl. - Loading length
B. externally from. - depth of external slope, B. Otl. - depth of molding
L. Inside. from. - the length of the inner slope, L. under. - Length of the windowsill
B. Inside. from. - The depth of the inner slope is equal to the width of the windowsill, if it leaves from the inner edge of the wall by 50 mm
H. Rev. - Height of the internal slope
L. B.P. \u003d H OTV. + 50 mm - side panel length (you need 2 pcs.)
L. V.P. \u003d L inside. Rev. + 100 mm - top panel length (1 pcs needed)
L. Inside. Rev. - the length of the inner slope
B. p. (Depth depth of the discovery is equal to) \u003d B. Inside. Rev. (depth of internal slope)
Preparation for mounting
Remove the window sash:
Remove decorative lining with loops.
Put the handle to the "Rotate" position and open the sash.
The pin of the top loop is pulled down with a screwdriver, overcoming resistance. Holding the sash to fallout, tilt it on yourself and, lifting up, remove from the bottom loop.
Setting the sash to the place in the reverse order. When the pin is returned to the original position, it is necessary to fix it with a screwdriver.
Installation of mounting plates:
Plate set parallel to the frame and rotate 90 °, the long end inside the room. Fasten the plate with self-tapping screw with a 4 × 35 mm brown.
Installing the window block in the opening of the window.
Install the frame of the window block in the opening according to the scheme:
Using a plumbing and level, handle the position of the frame vertically and horizontally. The maximum deviation is 1.5 mm per meter, but not more than 3 mm for the entire height / width of the product according to GOST 30674-99. At the same time, it is pre-consolidated by the frame in the opening by the installation by assembly wedges and gaskets.
Cut the plates into the working position and place the opening of the hole for fastening the plates on the slope. Pencil note on the outside of the frame of the contour of the road.
Removing the mounting wedges, remove the frame from the goof. Drum diameter 6 mm Drill holes for mounting anchor plate. In the prepared holes insert nylon dowels with a diameter of 6 mm. Clean the surface of the window opening from dust.
Sticker PSULA:
The cops are established if the window loop has a quarter. If a window hole It does not have a quarter, the outer seam is sealed after the installation of the window frame with special moisture insulation, vapor-permeable sealants. The cops are attached by means of a self-adhesive layer. Stick psyl directly with outdoor Frames at a distance of 3-5 mm from markup (Fig. 7) in compliance with the following requirements:
cutting the length on the length of the length with the allowance for the launch in the places of angular connections to the ribbon width. It is allowed to dock the ribbons in length with a falsestone at least 25 mm.
Fixing the window block in the open
Install the frame in the window through the opening, using mounting wedges, according to Scheme No. 3, checking the rope and level of the frame.
Fasten on one side plate with 5 × 60 mm screws in pre-installed dowels. Re-check the correctness of the frame position with a plumb and level. Check the difference in the length of the diagonals of the frame of the installed structure:
With a diagonal length from 1 to 2 m, the difference between the lengths of diagonals should not exceed 2 mm, with a diagonal length, more than 2 m should not exceed 4 mm.
Secure the rest of the plates.
Remove all mounting wedges, except the lower and diagonal, according to Scheme No. 3.
Install the flaps on the fixed frame, close the sash and put the handles to the "closed" position.
When installing the balcony block, check the door frames and the adjacent window to the absence of a mutual deflection by measuring the transverse dimensions according to the scheme.
Fatitude.
Moisten the slopes with a sprayer or painting brush for better adhesion of the mounting foam.
Take seam around the perimeter:
- If the seam width is not more than 45 mm, the swapping is made in one stage;
- If the width of the seam from 45 mm to 70 mm, the gate is produced in several stages;
If the seam width is more than 70 mm, it is necessary to use the corresponding "window expander".
Stand profile
From the outer side of the window block along the shell profile, put one layer of foam.
Installing the "window expander".
Additionally, you will need:
For an expander 25 mm
- self-tapping screws with a 4 × 40 mm brown;
For expander 40 mm
- Self-tapping screws with a brown 4 × 55 mm
On the outer part of the frame of the window block to stick pips. Tighten the expander with the solemnosis frame.
Connection of 2 window blocks or window block and balcony doors
Additionally, you will need:
Metal drill 4 mm, universal silicone sealant, screws with a brown 4 × 50 mm
In the frame of the 1st window block, drill holes at a distance of at least 40 cm from each other.
On the outer part of the frame of the 2nd window block stick pips. Outdoor outer groove frames Fill out universal silicon hermetic. Insert into external grooves frame connectors. Pull the frames with self-draws through the drilled holes
Sticker waterproofing tape
After the foam is frozen in the lower outdoor part of the window block, cut foam so that it does not interfere with the low-end installation.
On top of the trimmed foam, paste the waterproofing tape with an outbreak of 10-20 mm on the outer part of the wall.
Final modifications
After frozen the foam, cut the excess foam protruding from the seam. Cut the vaporizolation tape according to the length mounting seam. Remove with self-adhesive layer protective film. and smoke the tape along the entire length of the inner seam.
Next steps:
- Establish from the street side of the tump, starting it in the groove in the lower part of the frame, and attach 4 × 25 with the help of screws to the coaching profile. Install from the side of the room window sill.
- Remove with a frame and sash protective film.
- Install plastic slopes Or plaster down the window opening.
- If necessary, adjust the accessories.
Install decorative loop overlays.
How to install windows in wooden houseWe will describe in the next article.
Metal-plastic window - pretty complex design. Consider the main terminology that the tinners use when a set of window and door structures, add different options and product parameters.
PVC profile
The material produced by the extrusion method with a given form and dimensions of the cross section having 3, 4, 5-, 6 chamber structure.
Reinforcing profile
The steel profile, which is located in the middle PVC-profile chamber and is necessary to impart the window design of the required stiffness.
Camera (profile)
The closed cavity (cavity system) inside the PVC profile of the plastic window in which the air serves as additional thermal insulation.
Frame
PVC profile, which is the main (carrier) in the design.
Sash
Opening element of the window. It may be swivel, swivel-folding or folding (fraumuga).
Focus
Place connecting sash with frame, impost or with sash.
Furniture groove
The groove in the sash profile, designed to install accessories.
Impost
It serves as a frame separator to segments in which the sash can be installed, or there may be deaf (distinguish the horizontal, vertical and beveled impost). The impost can be installed in the sash (there are nuances described in technological constraints).
Shlp.
The plastic profile which is attached to one of the sash and serves to the action of these sashs among themselves. One sash is dependent on the other when opening and does not have a window handle.
Stocker
It serves to hold the glass or sandwich plate in the design.
Fals.
The surface of the profile, which is supported for the installation of accessories or glass. In the sash there is an internal fold (for the glass) and the outer (for fittings). In the frame and the impost there is only Falk to install double-glazed windows.
Fold lining
Plastic elements with which double-glazed windows are installed in the design.
Seal
Product from elastic materials (rubber, rubber compounds) to seal the adjoins in PVC design. Usually, all profiles are already supplied with an extruded seal.
Expansion profiles
Special profiles that make up the width of the frame.
Connecting profiles
Profiles intended for connecting several PVC designs standing in one way.
Corner Connector (Square)
PVC profile is predominantly rectangular, serves to connect the design frames at right angles.
Erker profile (variation)
Plastic window profile that allows you to select an angle of the location of the plastic windows that are connected between 40 to 180 degrees on semicircular, triangular or multifaceted glazed protrusions in the building wall.
Connecting Planca
Thin PVC profile with which you can connect structural frames, significantly increasing their common dimensions (3-5mm).
Bone (Static)
Connecting profile of a width of about 20 mm with a mandatory reinforcement. It serves to connect frame designs at a considerable height for giving hardness.
Glass windows
Translucent part of the window. Depending on how much glaze is used, there are single-chamber (two glasses and one chamber between them) and two-chamber (three glasses and two chambers) double-glazed windows. Mainly use single-chamber double-glazed windows with a total thickness of 24mm and two-chamber - 30-32mm. The glass is filled with air or inert gas.
Double-timing configuration (formula)
Description, reflecting the amount, the thickness of the glass, their appearance and the distance between the glazers in the double-glazing of the plastic window. At the beginning and at the end of the formula there is a glass thickness.
Camera (glass)
The space inside the glass windows of a plastic window bounded by glass.
Remote frame
A glass element that serves as a strut between separate glasses. Typically, the remote frame is made of aluminum, less often from steel, PVC or other materials.
And-glass (і-glass, energy-saving glass)
Glass with a soft selective coating that improves the heat-saving glass properties. Delays infrared (thermal) radiation.
Argon
Inert gas used to fill the glass windows of the plastic window.
Sandwich plate
Opaque panel that installs instead of a glass package. In terms of its characteristics, the two-chamber glass windows in thermal insulation, consists of polystyrene foam high density And linedside outside with solid plastic.
Glass toned
The glass, which was given a certain color by the introduction of dyes in the process of glass ward (tinted in mass) or coating (special toning films) to the glass surface.
Furnitura
These are mechanisms and details that provide opening of the sash (handle, loops, locking mechanisms, spiing, decorators).
Balcony latch
Detail of plastic design accessories, allows you to fix balcony door In the closed position without turning the handle of the balcony door (mainly used on the side of the balcony).
Block Incorrect (erroneous) opening
Prevents the rotation of the knob into the folding mode when the sash is already in the rotation mode so that the window or the door does not hang on the same loop (which can outreach them).
Children's castle
It allows you to block the rotary function of the sash, but leaves the ability to lean it (to limit the access of children to the open window).
The loop
Detail of the plastic window accessories on which the sash is attached.
Microlift.
Allows you to promine a wire sash when closing, unloading the loop. Creates an additional support for the sash.
Microwing (slotted ventilation)
A small slot when turning the handle for 45 degrees. Microwing mechanism is installed only in swivel-folding flaps.
Step by step ventilation
It makes it possible to fix the tilt (folding) of the sash in 4 positions. It is achieved at the expense of simple manipulation using a window handle. Step-by-step airing mechanism is established only in swivel-folding flaps.
Splosses
These are decorative elements. Sshpros is installed inside the glass package.
Anti-mosquito net.
Prevents insect penetration into an apartment or a house through the PVC window. It looks on the windows of the PVC with a neat element, which, if desired, can be removed. Anti mesh mesh is attached from the outside of plastic windows PVC.
Jalousie
Light design, consisting of horizontal or vertical rotating plates, allowing to adjust light and air flows passing through plastic windows.
Visor
The item is designed to remove the water (installed above the design outside).
Low tide
The item is designed to remove water (installed under construction outside).
Sill
Horizontal part of the internal frame of the window opening, laid at the level of the bottom of the frame.
Open (window, mounting)
Weeping in the wall for mounting one or more window blocks, the design of which also provides installation of mounting seal, slopes, sings, windowsill.
Slope
Part of the window opening located between the window block and the wall surface. After installing window blocks, it is most often necessary to finish the slopes. It is possible to do this with plaster mixtures, or plasterboard sheets foamed PVC, is often used by the sandwich panel. It is possible to install the decoration of arched slopes.
Lamination (color)
For "color windows" there are so-called lamination films. They are applied to the profile using special equipment For one side of the profile (or on both). Such a film can mimic the structure and color of various wood species or to be color monochrome. Lamination significantly affects the cost of metal-plastic design.
Rollet
Rigid aluminum movable design, which can be installed as a replacement of the grid.
Heat transfer coefficient
The magnitude of the heat flux through the unit area of \u200b\u200bthe structure when the temperature difference between the outer and the internal medium is one degree. The higher the coefficient better design Holds warmth. The highest rates are provided with 5 and 6 chamber PVC profile and two-chamber glass with and-glass.
Dismantling
Removing from the window outlet of the old design before installing a new one.
Installation
Installing the design in the opening with the subsequent fixing of the window (mainly on the anchor, anchor plates and polyurethane foam).
Mounting depth
The technological depth of the frame, the fact that we call the windows thickness in everyday life. This is the distance between the surface of the frame facing the street, and the surface facing the inside of the room.
Mounting gap
Distance between the wall and the frame frame. Filled in thermal insulation materials (foam), further subjected to trim.
Anchor plate
Fastener part used to pre-fix plastic windows in the window loan.
Anchor
The view of the dowel used in the installation of metal-plastic structures. When installing the window design on an anchor, double-glazed windows must be removed.
Modern metal-plastic version of the balcony door and windows create a beautiful view and comfortable conditions. The installation of the balcony block consists of a number of simple operations, requires attention to small things, but in general the process is simple. Perform this work maybe a person who does not have professional skills in this area.
PVC Balcony Block consists of a balcony door and windows. There are different variations of this combination. For example, the window is located on the right or to the left of the door. Option is possible: Balcony door between two windows.
Each of the block elements can be other than the opening mechanism to have a folding. The windows also come and deaf that do not open.
The kit includes:
- slopes
- low tide,
- threshold,
- windowsill
- furnitura.
If you consider from what the balcony door consists is a box and door canvas. The window has a frame and sash.
Preparatory work
The space from unnecessary things and furniture should be released so that it is possible to install a new design, cover with a film that you cannot be taken out of the room, to avoid building garbage and dust.
To install a balcony unit, a place should be prepared for it by dismantling the old design.
- Remove the shutters of the windows and canvas doors.
- To remove a wooden frame, it should be cut in the bottom to cut with a knife. After that, remove parts from the goat, approaching the mounting scrap.
- Remove with slopes plaster if it is, with a perforator.
- It is believed from the surface of the outlook the remains of seals, insulation, mounting foam using a brush.
If the preceding design was also a metal-plastic balcony block, then it is starting to dismantle from removing all attachments, screws, linings from the frame after removing the inside of the doors and windows.
The discovery should be released from the finish to the capital wall.
Step-by-step unit of the balcony block
To work on the installation of the balcony door and the windows will need tools:
- bulgarian,
- pistol for foam,
- electrolovik,
- roulette,
- screwdriver
- level,
- perforator
- rubber cizyanka.
- drill,
- stationery knife,
- a hammer,
- corolnic
- marker,
- metal scissors,
- mount.
Assembling balcony block
Before installing the plastic balcony unit, you should connect the door design and window to one unit. To do this, you need to put the window block with a balcony door on the upper sides, docile the side parts. Between them should be located connective bar . It is necessary to test well that the upper sides of the frames that were on the floor were on the same line. For this operation, it is necessary to choose a smooth surface.
Tip: If the window has a movable sash, it is necessary to remove it for convenience for convenience. In the door balcony block you need to remove the door with loops.
Two sets are connected by screws. For them, holes are made at a distance of thirty centimeters from each other in the door of the door block and begin to twist the structures with it inner. After that, it turns out a single balcony unit.
Choose fastening elements
The balcony unit can be attached with:
- copily
- anchor plates,
- anchor bolts.
Each of the types of fasteners has its advantages and disadvantages and can be selected for work.
Tip: Choose for mounting anchor plates. In this case, it is possible to install without separating frames and double-glazed windows.
Preparation of the balcony unit to installation
On the two side and upper horizontal surface of the frame fix the mounting plates. They are joined by screws. Fifteen centimeters are retreating from the corners of the structures and plates are installed so that they are rotated to the inside of the block. Between the extreme plates, you need to attach intermediate at a distance of 50 ÷ 70 cm. Screw to skip in the middle of the width of the block into the profile deepening.
On the perimeter of the block from the outer edge, the psyl tape is glued. This is a sealing element prescribed by the regulations in order to protect against moisture and ultraviolet rays mounting foam.
If provided, at this stage, the brackets are screwed to the mount. Try the grid to evenly cover the discovery, outlines the installation locations of the brackets and attach them to screws.
Montage sequence
Consider how to install a balcony block with your own hands:
- If the threshold includes the kit, then you can immediately start the installation of the unit. In the case of its absence, it is necessary to start installing from it.
It is recommended to use plastic mounting wedges, and not wooden - Block put on stands (mounting wedges), After the end of the work remain in place, are not removed. They are provided for each vertical element of the unit. In order for the design to orient in the space strictly vertically and horizontally (transverse elements) uses coasters of different heights.
- Temporary fixation in the goiter is also made using mounting clins.
- Check the level of correct location in the planes: horizontal and vertical. Wedges make correction of errors. It is convenient to use them as paired elements. The construction level is placed on the horizontal element of the block. If necessary, be corrected - the hammer is wedged in the right direction. After that, the level to the vertical component of the block is applied and adjust its location by the wedges, which are installed on the left and right between the block and the wall.
- Now fix the block fastening in advance of the prepared plates. They are neatly extension and pulled up to the wall, so as not to move the block-tested in the space. To attach the plate through the hole of one of them drilled by a punching hole in the wall, depth of eight centimeters.
Screw to this hole screw the screw, connecting the plate to the wall. And so consistently fasten all the harvested mounting plates.
Installing a low-end balcony
- From the blank, the molding is cut off with scissors for metal along the intended line part, which corresponds to the width of the window.
- On the side of the balcony, the drain pattern is installed, screw the screws to the profile from the mounting kit.
- From the outside of the window, you can, at will, install decorative corners. Plum connection gaps with a wall from two sides are filled with sealant.
Sealing gaps by mounting foam
In accordance with the standards, the upper horizontal seam should not exceed the width of twenty millimeters, and the side between the block and the wall can be up to fifty-five millimeters depending on the size of the structure. From the side of the room you need fill the gaps with mounting foam, leaving a free one-third of the space. It will be a technological clearance that foam will occur after frozen and expansion.
In order for the foam to pass all the necessary technological stages, the seams are left alone for a day. After that, the excess foam frozen foam is cut with a special knife. High-quality seam should not have emptiness in its structure.
Installation of additional details
Installing the balcony block with your own hands is almost completed. It remains to finalize the details.
Device of the windowsill
The windowsill is customized in size so that it began to become well under the window. Its width must allow you to push it when the window is installed for two centimeters.
From pieces of wood, the bars should be made, which are led by the detail installed to avoid its deflection. Bruks are chosen in size to provide an angle of inclination of the windowsill in two degrees.
The element is carrying a cargo, and after filled with the joints of the mounting foam. The load is needed that the frozen foam does not raise the design.
Filling the joints of the window sill:
- first at the connection site with the window,
- sidesways
- under the windowsill in the place of connection with the wall, but not to the very edge.
After a daily technological break, you can remove the cargo.
Internal slopes
Sunsions on the balcony unit can be plastered or installed decorative part - special internal slopes. Often, the kit includes a sandwich panel. They will do appearance The slopes are modern and aesthetic, in addition, insulate the discovery .. The answer to it you will find in our article.
Tips on the organization of lighting on the loggia. You will learn how to carry out electricity to choose the right lamps.
Sequence of work:
- The segments of the starting profile are harvested along the size of the length of the upper frame and side surfaces.
- Billets are fixed with screws around the perimeter of the block from three sides.
- Measure the necessary sizes for the top panel and side parts.
- Cut panels of the desired dimensions.
- Insert panels into a screwed starting profile, first the upper part, and then the side items.
- One edge of the panel is obtained by fixed in the profile, and under a part of the panel speaking into the room, the gap between the element and the wall splashes a small amount of foam, slightly rendered the design and pressed then into the place to the wall. Until the frosting of the foam, the slopes on the project provisions are held with the help of painting tape. After a daily break, the tape is removed, the excess foam is cut off.
Decorative plants
- Cashbinds are harvested (F-profiles) of the required size.
- Dress details on the ends of decorative panels, in the corners it is necessary to connect under forty-five degrees.
- The locations of the side and upper panels, as well as the bottom of the side decorative elements with the windowsill close up with silicone sealant.
Installing a balcony block video
Here is a video of our article on how to install a balcony unit yourself. In it you will find useful tips from professionals.
It is an integral part of the window. It consists of several glasses, which, in turn, are separated by a metal remote frame. With two layers of sealant, the design is firmly connected. Double-glazed windows are divided into three-, two- and single-chamber.
The camera is a gap (gas or air) between the glasses. Example: Single-chamber double-glazed glass consists of two glasses that separate the airspace. The glass windows differ in width: 42, 32, 30, 28, 24 mm. If the width of the single-chamber glass is 24 mm, it means that there are two glasses with a width of 4 mm and the distance between them is 16 mm.
The energy-saving properties of the glass unit depend on the number of glasses and their species. Condensate is formed on a single-chamber glass window formed for minus eight degrees, and on a two-chamber for minus eighteen. The main functions of the glass package is sound insulation and thermal insulation (about the pluses of plastic windows). Special glasses with a low-emission surface layer (I-glass or K-glass) and several air chambers are used to reduce heat losses through double-glazed. You can also increase the distance between the glasses or fill the distance between the glasses of inert gases, it will improve sound insulation.
Connecting profiles KBB for windows
Type of a good profile: connecting profile, in the pallet - 2080
Property Type: Connecting Profile, 58 Series, Pallet - 208 Bim.
Type of Dobly Profile: Universal Connector Adapter, 58 Series, Pallet - 208 Bill.
Type of a good profile: N-shaped connector, 58 series, in Pallet - 455 pm
Type of a good profile: connecting profile, in the pallet - 1950
Type of Dobly Profile: Connecting Profile, 70 Series, in Pallet - 208 BY
Type of Dobly Profile: Universal Connector Adapter, 70 Series, Pallet - 208 Bill.
Type of a good profile: connecting H-shaped, 70 series, in the pallet - 455 pm
Type of a Dobly Profile: Corner Connector 90, in Pallet - 273 BY
The above is the catalog of the connecting profiles of the KBA produced by SAB KBE. In a brief description of each of the articles, the number of route meters in one pallet is given. With us you can buy a connecting profile for plastic windows with a minimum volume in one pallet.
Each of the articles presented has certain features and is used for different purposes. Each series presents a base profile, which is commonly referred to as a plastic connector. These are the articles 150 for the 58 series and the article 350 for the 70Y. This docking profile is used to connect several window blocks with each other. Often used on balconies.
H The shaped connector is also in demand from companies engaged in the production and installation of windows. The articles 152 and 352 are distinguished by the presence of reinforcement. H A figurative docking profile for PVC windows is used when mounting larger structures and is designed for the window block size up to 2500mm.
The universal connector is characterized in that it allows you to keep window blocks at an arbitrary angle. This functionality is in demand when installing windows at non-standard architecture facilities. For glazing balconies with indirect corners. The profile involves the use of a universal connector adapter. And despite the fact that this is a separate name, it is used in a pair with the corresponding article.
Another plastic docking profile is an angular. Articles 155 and 355 for 58 and 70th series, respectively. It is used to connect window blocks at right angles. Unlike a universal connector, used without additional profiles.
If you need to buy connecting profiles for PVC windows based on CBB systems, you can contact us, we will be happy to supply you high-quality products that are not inferior to imported in their characteristics affordable prices russian manufacturer. We ourselves are a producer of fair profiles, which allows you to offer favorable conditions and guarantee consistent quality. Also that we are manufacturers, allows us to offer connecting profiles whose price will be the most profitable as possible. Plastic profiles for PVC windows, produced using GreenLine technology with concern about environment. In addition to connecting, or docking, window profiles, we will find a complete range of promotional profiles of the KBA: expansion profiles, coaching profiles, universal.
sAB-KBE.COM.
Connecting profile for PVC windows
Best answer
probably you did not understand me.
And I think that you understood you right)
Here is the profile you are talking about:
He stayed with me after I disconnected the door and the window block among themselves.
And a blow from the end of this profile, in the area of \u200b\u200bthe window sill, mercilessly, for nothing prevented the longitudinal movement of air with non-charled ends.
Useful answer? Well no
How is the assembly of the frame of the balcony block from the PVC profile?
40 Read
Installing a balcony block with your own hands puts many tasks in front of a beginner master
It is necessary to make measurements taking into account the quarters of the window, order and bring a manufactured design to the object, to properly prepare the discovery and, which is very important, correctly assemble into a single whole unit itself. The competent assembly of the frame of the balcony block from the PVC profile is that the connection of the door and the windows to each other is durable, hermetic and in the end did not warm up during the cold
In this article, you will find several useful recommendations on how to properly assemble the balcony block.
As you understand, the future node of the adjoining of two design elements requires careful sealing. Lock the door frame on the floor loop down and apply mounting foam Along the rib frame located on top.
The foam layer must necessarily pass the primary polymerization process. These 15 minutes should be spent on the preparation of the window. With the help of a screwdriver and a 5-millimeter drill, screw the window profile in three places from the opposite loop so that the holes come out in the center of the fastener of the frame. Supervise better from the outside: first, it's easier and more convenient, it will help to avoid damage to the sealing gum by a rotating element of the screwdriver.
While you will be engaged in the window, the adhesive applied by you will already acquire a suitable consistency: the foam will cease to be viscous and sticky.
Please note: Compliance with the norm of primary polymerization helps to avoid unpleasant consequences, since accidentally compressed areas of fresh foam lose the ability to expand, which deprives this section of tightness adjoining. Sound crust protects the substance from careless touches
At the time of the connection, it will burst, release the adhesive composition, which guarantees the manufacturability and reliability of the joint.
Now install on one of the designs of the connecting profiles, previously removed from the RAM protective film. Additionally apply some mounting foam for better gluing and connect the door and window frame. Be sure to align the horizontally all the details before finally bore them with each other. For the final assembly stage, we will need a screwdriver, a bits of pH 2 and self-tapping screws with a drill.
IMPORTANT: Do not screw the screws too much so as not to deform the profile, while their lengths should be enough to pass through the first part and entrenched in the reinforcement of the second.
As you can see, the assembly of the frame of the balcony unit is not so complicated technologically, so as not to take up it with their own hands, without the involvement of outsiders who blame themselves by professionals.
What are plastic windows connectors?
You need to know which system you have a plastic window, as each manufacturer different types connections and can differ much from each other. Even the windows of one manufacturer may have different kinds connections. So, for example, window profiles produced under the Goodwin brand have at least two most common window systems, such as group 583 and group 705
Each group of profile differ from each other, although they have the same names. They differ in articles, which consist of four digits. Below are the profiles themselves and their components, including fasteners.
restart24.ru.
Connections to plastic windows
Updated interior modern plumbing, high-quality household appliances. Inside the room is warm and cozy, the connection of the balcony door with the window allows the sunlight to freely penetrate the room. When ordering designs, it is recommended to contact the proven company whose specialists will manufacture and install window elements.
The life of modern citizens is fleeting. A lot of time goes to get to work. Therefore, I want to spend at least a couple of hours in the house, where it is always cozy, warm and comfortable. Beautiful interior, functional kitchen and bathroom. End the idyll of the window Taurus Kharkov, performed by individual sizes. Experienced masters are always ready to perform measurements and installation at a professional level.
On the list connection of the balcony door with a window, locks on the windows from Children Omsk, window into the courtyard and windows in the square, does not close the PVC video window, windows Reheha 21 centuries, metal-plastic windows and doors price in Kherson, apartment design with an angular window, selling the window Minsk, the growth window of Nizhny Novgorod, JavaScript prevent changing the size of the window, low-cost blinds on the SPb windows.
Permanent temperature drops are forced to think about ensuring constant heat in an apartment or house.
Films for metal-plastic windows
The angle of inclination should be at least 5 °
Locking on the facade should be 30-40 mm, but be at least 20 mm.
Films should be securely fixed to the windows frame and isolate from falling and rainfall.
With multi-layer wall construction, it is necessary to carefully plan the seal and insulation of the windowsill.
Noise protection activities are mandatory. Soundproofing material must match at least a B2 fire safety class. It is applied to the bottom side of the lowrow.
Additional fasteners should be carried out with a protrusion of more than 150 mm.
Additional measures to protect against storm rain, with extreme rain and wind loads.
Temperature compensation seams are performed every 3000 mm. The jokes are performed in such a way that the precipitates get outward.
Side water removal should be provided:
Aluminum ties - edge bending up;
From stone tumps - due to the grooves for water removal;
At the sumps with sideways planned on them, their connecting places should be waterproof or compacted.
Side accession of ties
So, both are in the lower connection, as a rule, are the surface of protection against rain and wind, the lateral connection must be carried out in such a way that the functional surfaces (protection against weather and the separation of the internal microclimate from the external climate) were inseparable throughout the perimeter of the attachment.
Therefore, the seals at all angles should be inseparable and perceive the temperature changes without damaging the walls, the separation of plaster. Sealing ribbons have proven to directly attach to the plaster.
When accepting an apartment found that there is no connecting PVC profile between the window frame and the balcony.
On our remark, they pasted T-shaped plugs in the gap between the frames (without dismantling windows). To make it necessary to disassemble for proper InstallationHow important is the docking profile?
My experience of accepting new buildings says that the PVC windows that the developer puts are not suitable, they put the cheapest. M s accepted an apartment in August, hoping that the PVC windows would be normal, they did not change them, but in the winter, they were merciless in winter. The developer tried to do something with them, compact, etc, but a sense-zero. Heated, stuck themselves to survive the cold. Now we are going to change them until the next autumn. Very sorry for repair, but will have.
Other questions on this topic
- How to install doors correctly?
Please give advice on installing doors. As the platband is fastened, if there is no place for it on one side of the opening. There is a single room to go into the wall of another. There is a plan of the apartment.
- Restoration of laminate and doors after flooding.
Hello. I have big problems - I was flooded with an apartment, (new - was in the process of decoration ...), all laminated laminate suffered. Please tell me whether it is possible to use at least some number of laminate, is it possible to be reused ...
- Hello, please tell me the sequence of repair work.
We need to swap windows, doors, heating, pipes and plumbing, make a small redevelopment. All in the murdered state. And in general, it is necessary to start or still with a bathroom and toilet. I understand that you have to start with windows, but what's next7
- The color of window frames under the color of the door?
Hello. The apartment is a two-room apartment with a total area of \u200b\u200b51 sq.m. Repair at the stages of shift windows. White windows do not want)) I especially do not want a white balcony door. Initially, I had an idea to make windows and interior doors in one color decision. But rested in ...
- What color and style to choose interior doors?
I would like to change the doors in the apartment when I did the repair, unfortunately the Fin. Possible. In the present moment I am in difficulty, what color and style to choose doors? I thought about the white doors, but I don't know how much it would be combined with the floor ....
ideas.vdolevke.ru.
Design of plastic windows.
Design of plastic windows.
Plastic windows have become an integral part modern houseHowever, many do not even think about the design of PVC windows. The design of plastic windows consists of:
Glass windows
Furnitura
Rubber seals
The sash consists of a five-chamber or three-chamber plastic profile. Inside this profile is a galvanized steel reinforcing profile, which has a P-shaped form. The sash is intended to ensure that the plastic window has parts that can open (types of plastic windows).
Frame, like the sash, consists of a five-chamber or three-chamber plastic profile. Inside this profile there is a galvanized steel reinforcing profile, which has a form of a rectangular pipe or a p-shaped form. A reinforcing profile is always present in the frame. Steel and plastic profiles are connected to each other with screws. Rama gives structures stiffness. It is through her that the window is attached to the opening (about installing plastic windows read here).
Double-glazed windows is an integral part of the window. It consists of several glasses, which, in turn, are separated by a metal remote frame. With two layers of sealant, the design is firmly connected. Double-glazed windows are divided into three-, two- and single-chamber. The camera is a gap (gas or air) between the glasses. Example: Single-chamber double-glazed glass consists of two glasses that separate the airspace. The glass windows differ in width: 42, 32, 30, 28, 24 mm. If the width of the single-chamber glass is 24 mm, it means that there are two glasses with a width of 4 mm and the distance between them is 16 mm.
The energy-saving properties of the glass unit depend on the number of glasses and their species. Condensate is formed on a single-chamber glass window formed for minus eight degrees, and on a two-chamber for minus eighteen. The main functions of the glass is sound insulation and thermal insulation (about the pluses of plastic windows read here). Special glasses with a low-emission surface layer (I-glass or K-glass) and several air chambers are used to reduce heat losses through double-glazed. You can also increase the distance between the glasses or fill the distance between the glasses of inert gases, it will improve sound insulation.
Furnitura combines all metal fixed and moving elements of plastic windows (loops, locks to lock the window, restraint of locking locks, window or door handles, etc.). Fittings are necessary for connecting sash and frames. In addition, thanks to the accessories, the window can be opened in various versions. Also, accessories can also be attributed to plastic windows.
Rubber seals are required in the locations of the junction of the stroke and glass, frame and sash, etc. They provide a dense connection, and do not allow to avoid the penetration of water or purge. How to properly care for rubber seals will tell the article Care of plastic windows.
Strapboard is an element of a window that is made of plastic. It can have a different width depending on the thickness of the glass. Strapboard fastens a glass.
Shill is a plastic profile that serves to connect two sash. When opening one sash is dependent and does not have a window handle. A plop connection is good because if you fully open two sash, then all the opening will be completely free.
The impost is a five- or three-chamber profile. Inside this profile is a rectangular tube. The impost is required to connect more than two sash in the design of one window. Each sash can open separately.
Design of plastic windows
Types of windows. Eighth. Many or composite designs.
The connector consists of three parts. A number 1 indicates the plastic profile (there are 2 in the connector) which actually provides the connection itself. At the same time, 3 protrusions marked under the number 3 should enter the compound into the corresponding grooves on the frames connected. At number 4, I designated an external part of this profile. In order for the connection to be stable and ensured the stability of the design connected, an enhancing metalic profile (number 2 in the figure) is inserted between plastic profiles. But in order to ensure heat insulation on the connector pasted the heat insulating tape naturally, on both sides, as shown in the figure below the number 5.
How to connect two windows with each other?
In order to combine two windows, we collect a connector and freamed it on a smaller frame in height, following the connector tightly and without distortion enter the grooves on the frame, when you can need to knock on the metalial one, in no case plastic profile. Making sure that the connector is installed correctly drilled in the metal profile and screw the fastening screw in the frame. One will be enough since its time function. It is necessary only for that the connector would remain in place during the collection of the entire design.
At the next stage, making sure that the connector is installed correctly (in order to test the connector correctly, it is enough to measure the distance from the connector to the edge of the frame. From above, bottom and in the middle. The distance should be the same everywhere.) You can proceed to fastening the connection . To do this, with the help of a long drill drills, the frame, the connector and the second frame to the depth of the screw (we use screws with a thickness of 5 mm and a length of 100 mm) as it is shown in the photo. The diameter of the drill is preferably a little more than screw. For example, 5.5 or 6 mm. If necessary, when twisting the connection, apply a little technical fat for a screw.
Screw screws.
fenster-tueren.blogspot.com.
Installation of PVC windows according to GOST. How to make it right
In accordance with the norms and requirements of GOST in the windows of white PVC, the distance between the attachments should be no more than 700 mm. and 150-180 mm from the inner corner of the frame. The diameter of the drill must be less than the diameter of the self-press.
In the frames drill holes for the connection. Self-tapping screws are inserted into these holes and frames twist. When attaching a design, anchor dowels drill holes in advance. According to GOST from the corner of the frame should be 150-180 mm. There are no more than 700 mm between the fasteners. Holes under the dowelle are worn from the outer side of the frame.
Then the support pads are placed under the frame. Support pads can be made of solid wood or plastic wood. Next, the design must be inserted into the opening and secure the frame with pillows. Then you need to take the level and with it to align the window design horizontally, helping the support pads and pillows.
After the horizontal leveling, the frame must be aligned vertically relative to the facade with the same level and pillows. From the outside, it is necessary to note the place where the psul tape will be glued (vapor-permeable self-insulating sealing tape). After the marker is removed. 
If you plan to finish slopes pVC panelsthen you need to snap on the frame starting profile for slopes.
With a shift of 5 mm. From the applied marks is pasted on the outer side of the frame of the ribbon psyl. First, on the upper part, then on the sides.
Pits - Pre-compressed sealing tape - is used to connect a steamproof water-repellent layer from the outside of the mounting seam.
From the inside to protect the mounting seam from moisture, it is necessary to stick a full butulic vapor insulation inner tape and fix it in the corners. Then the design must be added again in the opening and finally align with pillows and reference pads.
After that, the holes under the dowel drill in the wall and the vertical spacer pads are inserted on the sides of the frame and the window is fixed.
After fixing the window, you can hang sash. The next stage is the insulation of the window seam by mounting foam. For high-quality sealing, it is better to use a professional foam under a gun with a low secondary extension. Before applying the foam, you need to moisten the opening with a spray gun.
Carefully shake the foam balloon and fill the openings by 70% of their depths. Seams more than 5 mm are filled with foam in several layers.
If the window is installed in winter, it is necessary to use frost-resistant materials and winter mounting foam. After 15-20 minutes after applying the foam, it is necessary to close the inner tape. A metallized vapor barrier tape is installed under the windowsill. From the outside, an external diffusion vapor-permeable ribbon is installed on the sump. The window is set.