Cheap bathroom renovation. DIY bathroom renovation - The best ways to create a beautiful interior! (71 photos) DIY bathroom renovation without tiles

The bathroom can be refurbished exquisitely, even using the simplest Construction Materials... It is not necessary to buy elite porcelain stoneware and lay out the walls to the ceiling, order stretch ceiling, to spend money on the arrangement of warm floors with marble, it is enough to have a desire to do repairs, the ability to handle tools and a little bit of good taste.

Under the word "budget", the article will consider finishing options with the most affordable materials:

paintwork;
PVC panels;
wallpaper.

In addition, the secret of creating an interior in style will be revealed and it will be proved that brick as a finishing material in a bathroom is not inferior to other materials. After all, "budget repair" can also be stylish.

DIY wall painting

Painting walls is considered one of the easiest and least expensive finishing methods. It is important to choose the right paint and prepare the surface of the walls.

Advice! Make a design project for your bathroom... It is not recommended to paint absolutely all surfaces; it is advisable to cover the areas near the bathtub and sink with moisture-resistant panels or trim with an apron made of inexpensive ceramic tiles.

Step 1. Choosing paint for the bathroom

Bathroom paint must be antibacterial and moisture resistant. Otherwise, the appearance of fungus and flaking of the coating cannot be avoided.

Traditional oil paints are deprived of such dignity, and also quickly become covered with cracks, so it is better to refuse such an option right away.

When choosing shades, remember that it is inappropriate to paint small bathrooms in dark colors, as visually this will further reduce the space. Do not overdo it with the number of bright spots or complex patterns and their number, so that the interior does not look vulgar. Soft pastel colors will visually expand the room and fill it with light.

Please note that paints can be matte, glossy and semi-glossy. Of this variety, it is matte enamels that hide small defects on the walls best of all, while drops and streaks are clearly visible on glossy surfaces. However, if you can't make a choice, consider combining glossy and matte surfaces. This technique will allow you to make the bathroom modern and stylish without significant costs.

bathroom paint

Step 2. Preparing the walls for painting

Do not forget to take out all the furniture from the bathroom, remove the mirrors, cover the faucets with masking tape, and cover the plumbing with foil or newspapers, because preparing the walls for painting is the dirtiest and most time-consuming stage.

You should not apply new layers of paint over the old peeling paint, nothing good will come of it. If you have a drill in your arsenal, get a pair of sanding attachments for it and scrub the old paint off the walls. Remember safety precautions.

The paint can be removed using thermal methods, for example, using a burner or construction hair dryer... Heat the wall section and scrape off any loose coating with a narrow trowel.

When all the old paint has been removed from the walls, it is necessary to repair cracks and potholes, knock down the protrusions.

Step 3. Preparation of materials and tools

Prepare paint and tools, follow manufacturer's instructions. To apply paint, you need a roller, brushes, if you have a spray gun - great. Before purchasing, measure the area of \ u200b \ u200bthe surfaces to be coated, taking into account the volume, adjust the amount of material. For high quality painting it is better to apply two coats, keep this in mind at the time of purchase.

Step 4. Preparing the workplace

Free from unnecessary items workplace near the walls, if you are not going to remodel the flooring, then cover them with foil or paper. Carefully protect your bathtub and sink from contamination.

Start work from the most inconspicuous corner, in this place you can practically learn the properties of the paint and, if necessary, dilute it to the optimal consistency. We recommend painting the walls with a roller, and using a brush to process only hard-to-reach areas, corners and joints. different colors... Panels in the bathroom are still in fashion, if you plan to make them, then mark the height on the wall, draw a horizontal line.

Step 5. Start of staining

Apply a deep penetration primer to the wall. It will not only improve appearance, but will also increase the strength of the coating, reduce the likelihood of paint peeling.

Apply a second coat of primer on top of the first and wait 24 hours

Pour a batch of paint into the special plastic roller tray. Dip a roller into it, turn it several times, remove excess paint on a horizontal platform.

Practical advice. To minimize the chance of paint spilling onto the floor, rotate the roller before blowing it out of the tray.

Step 6. Painting technology

Read the painting from top to bottom, this method reduces the likelihood of dripping, they are immediately smeared, the roller "rolls on" them. Paint carefully, do not allow gaps. Do not be upset if the first layer looks ugly, this is an expected phenomenon. The fact is that on the wall there are areas with old and new plaster, remnants of unremoved coating, etc. They all absorb paint in different ways, which is reflected in the appearance. The second layer will fix all the problems, the topcoat will be monochromatic.

Paint in small areas, touch up difficult areas immediately with a brush. The paint should smooth out the pile marks on its own. If this does not happen, add a solvent to it. Pay attention to be conscientious, read the instructions for use. If in doubt, test the solvent for compatibility with a small volume of material; if the paint curdles, change the solvent.

It is advisable to apply the second layer when the first one is not completely dry, so the coefficient of adhesion between them increases. It is easy to check the readiness of the surface - slide your fingertips over it, they should not get dirty, but only "creak" a little.

If you are making a multi-colored panel, then you need to paint the surface in the second color only after applying two layers of the first. In this case, start working from the top of the wall; the panel is finished last. So you will be insured against paint getting on the already finished areas. Glue masking tape along the border line. Make sure that the paint does not flow under it, paint only with a brush, the direction of movement is in the direction opposite to the tape. Never stick tape on paint that is not completely dry, this is very important. If you stick it on a freshly painted surface, then during removal, with a high probability, part of the paint will be removed along with it, you will have to redo everything.

Wall decoration with PVC panels

The cost is somewhat more expensive than the first method, but in terms of design indicators it is much better. And the preparatory work is greatly facilitated, there is no need to remove old coatings, level the walls and fill up the cracks on them. The lathing under the panels can be made from wooden battens or special plastic profiles with clips. We recommend using the second option. The cost of plastic additional elements has almost no effect on the price of repairs, and the work is greatly simplified. In addition, the plastic profile is not afraid of moisture, which is very important for bathrooms. Wooden slats need to be impregnated with antiseptics - an additional waste of time.

Calculate the number of panels required, make a margin of 5-10%. If there is little experience, but the bathroom has a lot engineering communications, for the closure of which you will need to trim the panels, then take a margin of 10%. Simultaneously estimate the number of starting profiles, outer and inner corners. They are sold in standard dynes, cost a penny, there is no need to save.

Step 1. Installation of the battens

The panels are arranged vertically, the crate must be horizontal. The distance between the planks is 50-60 cm. Make markings on the wall, make sure that the lines are parallel. The lathing is fixed with dowels, drill holes with a drill with a perforator, use drills with victorious solders. To prevent the floor from getting dirty with construction dust, cover the place against the wall with foil or paper. Once all the holes are made, immediately remove it. Do not leave cleaning for later, practice shows that no matter how carefully you work, garbage will certainly spread throughout the bathroom.

Make the holes a few centimeters deeper than the length of the plastic part of the dowels, otherwise you will not be able to insert them all the way, dust will interfere. First, drill the two outer holes, attach the profile, then fix it in several more places. The horizontal distance between the dowels is 60–70 cm.

How to fix elements in one plane?

Check the condition of the wall with a plumb line, pay special attention to the attachment points of plastic profiles or rails.
Fix the two end elements under the level, re-check their position. If there are large recesses in the place where the profiles are attached, then use pads made of various materials. The dowels should attract the profile over the entire plane, there can be no gap between it and the wall at the attachment point.
Pull the ropes between them, two at the ends of the profiles or rails are enough.
Install all other profiles under the rope, with its help control the position of the rails.

Step 2. Installation of plastic panels

Measure the wall in at least three locations. If they have a spread of no more than a centimeter, then the work is noticeably simplified - all panels can be cut to size at the same time. To do this, you need to find out the shortest one, cut all the rest along it. Fold the panels in a stack of 5-10 pieces. on a flat surface and cut off with a grinder with a disc for metal. A discrepancy of up to one centimeter will be hidden by the ceiling and floor profile. It is installed at the top between the wall and the stream and at the bottom at the junction of the wall and floor. Place plastic corners on the sides.

Take off the exact dimensions of the last panel, cut it lengthwise. You can cut with a mounting knife or grinder. If you use a knife, then the operation must be done in two stages. First, cut the top and transverse stiffeners. Second - bend the panel, at the bend on the second side with a mounting knife, completely cut off the desired part.

Finish the rest of the walls in the same way. Practice shows that it is better to make the place near the bathtub from ceramic tiles. You can not cover the entire wall, but only an apron. The main thing is to close the area, which constantly gets water during the adoption of water procedures.

Video - Installation of PVC plastic panels in the bathroom

Video - Decorating the walls in the bathroom in 1 day with plastic panels. Do-it-yourself inexpensive bathroom repair

Pasting walls with wallpaper

Only waterproof types can be used for wallpapering. This finishing method has a number of undeniable advantages.

Low cost allows you to have an exclusive and reliable coverage with small material losses.
High manufacturability. Among all possible ways wall decoration in the bathroom wallpapering is the simplest. The work is completed within a few hours, the premises can be used as intended the very next day.
It is possible to frequently change the design of the premises. In some cases, re-pasting can be performed without removing the old one - the repair time is significantly reduced, the amount of construction waste is minimized.

Disadvantage - in terms of physical strength, wallpaper is inferior to traditional materials. But, if you behave carefully and avoid mechanical damage, then the period is calculated in many years. In addition, defects on the wallpaper are easily eliminated; after pasting, a small amount of materials will always remain. Do not throw it away, keep it just in case for repair.

How to choose wallpaper for pasting a bathroom

It goes without saying that only water resistant. When buying, pay attention to physical strength, and it depends on the material of manufacture.

Wallpaper type	Brief performance indicators
	The most modern, are distinguished by high rates of mechanical strength, can have long-term direct contact with water. Available in a wide range color solutions, can be monochromatic or with various patterns and ornaments, with a structured or smooth front surface. Disadvantages - relatively high price, the need to use a special glue.
	The cheaper segment, in terms of performance, is inferior to vinyl. Recommended for use on wall sections that are not exposed to splashing water.
	They are made of a special polymer film, they have a huge amount design solutions... Disadvantages - relatively high price and complexity of finishing. In addition, they can only be used on perfectly level surfaces.

How to properly glue the wallpaper so that later you do not have to constantly re-glue the exfoliated areas?

Step 1. Surface preparation

The most important moment in the production of work, of course, not counting the right choice wallpaper. Wall linearity parameters affect not only the appearance of the wall, which is very important, of course. Even theoretically, it is impossible to glue waterproof wallpaper on an uneven wall. And this means that there will definitely be air pockets and other places in which the wallpaper is not glued. During the use of the bathroom, these areas constantly increase in size, this continues until the peeling becomes noticeable. Repair will be required, it is quite difficult to perfectly align the wallpaper after repair, and in some cases it is impossible. What are the requirements for the wall surface?

The surfaces must be primed in two layers, this increases the reliability of adhesion and serves as additional protection against moisture penetration.

Calculate the surface area, make a small margin. Each roll of wallpaper is marked with length, width and total area. Use this information when purchasing materials. Do the same when choosing an adhesive.

Step 2. Algorithm for gluing vinyl wallpaper

Measure the height and width of the wall, cut the required number of strips. The stripes, depending on the pattern, can be overlapped or end-to-end. Cut with a small margin along the length, it will then be removed with a knife, the uneven cut will be buried with ceiling and floor skirting boards.

Practical advice. The most difficult thing is to glue wallpaper in the corners of the room. The fact is that they can have slopes, and this has a negative impact on quality. To prevent such consequences, never make joints in the corners of the stripes, try to have them in the middle in these places.

Glue the strip smeared with glue to one wall of the corner, align it strictly vertically.
Bend the wallpaper carefully, but not all the way to the corner, lightly glue the strip to the second wall.
Slowly start bending the wallpaper towards the corner, while constantly monitoring the offset of the second edge, it should always be upright. The corner of the wall is uneven - not a problem, let there be air pockets in some places, the main thing is that the edge of the wallpaper on the second wall is vertical.

If you do not follow this nuance, then on the entire adjacent wall the stripes of wallpaper will be sloped, and this is a big marriage.

For spreading with glue you will need large room, the bathroom, as a rule, does not have this size. Decide where exactly you will prepare the wallpaper. Take measures to prevent contamination of floor coverings, do not allow glue to get on the front surface. When wallpapering walls, neatness is one of the important conditions high-quality performance of work.

Squeeze the air out from under the wallpaper carefully. You can use rubber spatulas or rollers. But it is best to do the work with clean, dry hands. This way you will feel unevenness and will be able to eliminate them in a timely manner. It happens that the air pocket is discovered late, several strips of wallpaper have already been pasted on. It's not a problem. Pierce the air bubble with a needle in 2-3 places, after that you can re-press the wallpaper, they will take the desired position.

Cover the switch lightly with wallpaper and make a diagonal cut through it. Carefully cut the edges and press the wallpaper against the wall

Once the glue is completely dry, cut off the excess length and attach the skirting boards. Skirting boards are fastened with liquid nails or in other ways, taking into account the material of their manufacture.

How to renovate a loft bathroom

Quite fashionable among young people, the style is difficult for older people to get used to. Loft style is a method of repairing various premises, including production ones, with minimal financial losses. All structures remain in the same place, construction works for surface finishing are produced without using additional materials... Leave the old plumbing and sewer pipes in the same place, you can remove from them old paint and apply a new one. No need to try to make them match the wall, on the contrary, use contrasting colors that emphasize the placement of the pipelines. If you identify problem areas, immediately eliminate the malfunctions.

As for the walls, you can remove the old plaster to the brick, throw large depressions cement-sand mortar but not leveling or rubbing. Wipe brickwork metal brush, try to highlight the position of each brick. The older the seam and the brick, the better, the more modern the loft will be. Everything should be simple and natural, no plastic sheathing, gypsum plasterboards and other finishing materials.

Professional builders recommend finishing the wall section directly next to the bathtub with ceramic tiles, and making the rest of the surfaces under the loft. This approach will allow you to combine modern and fashionable interior design while maintaining the usual level of convenience.

Video - Industrial style loft bathroom

Video - How to save money on bathroom renovation

In these difficult times, people often lack funds. But repairs still need to be done. And it is desirable that the bathroom has a decent look and at the same time served for five to seven years. In such situations, it will be useful to find out how to cheaply repair a bathroom, spending a minimum of money.

Self-repair of a bathroom: how to choose budget materials

Today, the industry produces building materials of all kinds of price categories, designed for the consumer himself different levels prosperity. These can be goods of economy, standard and elite classes. There are also very cheap materials on sale, but their advantage is only in their low price. The quality and appearance of such products do not stand up to criticism.

Many works can be done independently without the involvement of specialists. For example, filing a ceiling with plastic clapboard does not require any special skills. Plumbing installation is also not difficult. Toilet bowl, bathtub, washbasin - all this can be assembled by yourself. It is only important not to rush, carefully study the assortment, calculate all stages of the work performed, then a successful result will be ensured.

As for building materials, it is more advisable to choose goods of economy class and standard price segment. Both of these types of materials practically do not differ in quality. The same manufacturer may manufacture similar products under different trademarks. The first will be considered a standard class product, and the second - an economical option, and they will differ only in cost. World standards provide for certain quality criteria, for example, the density of building mixtures for solidification must not be lower than a certain threshold. For economical materials, this indicator will be closer to the lower value. This statement is true for consumables.

As for finishing materials, plumbing fixtures and other things, a low price is not at all identical with poor quality. It is only necessary to take into account the mode of loads to which the product will be subjected. For example, floor tiles should be stronger than wall tiles. With the right selection and installation, bathroom tiles can last more than fifteen years.

If you have decided to carry out a budget bathroom renovation, photos of samples of which can be seen in the gallery of this article, you should not purchase building materials of elite classes. Their quality is not higher than that of budget products, and they benefit only due to their aesthetics.

Cost-effective repairs possible

In order for the result of the work performed to meet your needs, you need to carefully work out the preliminary project, think well of the possible finishing options and choose the most suitable one for you.

The main part of the costs is made up of the following items:

the price of the work performed;
the cost of building materials and transport services.

Thus, it is quite possible to reduce the cost of repairs, and you can save on both points. If you carefully study the information on how to make budget repairs in the bathroom with your own hands, you can come to the conclusion that most of the work is quite easy to do on your own, significantly reducing costs.

It makes sense to decide to resort to the help of professionals only for difficult moments, such as laying electricity, installing a water supply, and laying tiles. It is very important that electrical work is carried out only by specialists.

Please note that the cable must be of good quality and well insulated. Only solid wire segments can be used, and the distribution box must be placed exclusively outside the bathroom.

The question of how to make cheap repairs in the bathroom with their own hands worries many owners. To prioritize savings and the quality of room decoration, you should adhere to the following recommendations:

Do-it-yourself work... It is advisable to carry out most of the repairs yourself, since the prices for the services of specialists can exceed the cost of materials. It is better to carry out all dismantling work on your own.
Having your own instrument. Need to think design features repair in such a way as to minimize dismantling work. A basic set of tools will help make the task easier and faster. In addition, it will significantly reduce financial costs. It is recommended to acquire at least a minimal set, which will include a drill with a set of drills (preferably a percussion drill), a hammer drill with bits, a cut-off grinder with discs for metal and concrete.
Economical materials. The purchase of budget building materials will help significantly save money. But there are things that are not worth saving on, since the subsequent replacement can cost more than the initial purchase of quality products. But in some cases, you can cut costs wisely.

Reducing financial costs for bathroom renovation

If you need to make cheap and high-quality renovations in the bathroom, pay special attention to meticulous cost planning. A detailed estimate will help you significantly save money. You need to conduct a thorough comparative analysis market pricing policy. In addition, on the Internet, as a rule, you can purchase many materials at a significant discount, especially when purchasing in bulk.

To revive the boring interior and diversify the surface statics, experts recommend purchasing inexpensive accessories and little things that will add coziness to the room and become an appropriate addition to the design. Shelves, hooks, soap dishes, rubber rugs, curtains and other decorative items can become additional convenience and decoration.

It is not worth buying building materials and equipment renowned manufacturers because you have to pay extra for the name. Branded items are a priori more expensive. It will be much more profitable to purchase building materials produced by domestic companies, as well as those produced by our closest neighbors - Poland, Czech Republic, Finland. These will be quality, certified products. Of course, we are not talking about goods from China in the lower price segment. However, their products of average cost will be quite good quality. Remember not to sacrifice quality and aesthetics for the sake of economy.

We save on ceiling repairs

To decorate the original and unusual interior of the bathroom, and at the same time save money, you should first pay attention to cheap methods of decorating the ceiling in the room.

Stretch structures look attractive and rich, but they are distinguished by their high cost. However, the appearance of the plastic panels is no worse. An important advantage of suspended systems is that with their help any irregularities on the plane of the ceiling are easily leveled. In addition, this type of finish allows you to create multi-level structures. PVC lining belongs to moisture resistant materials, that is, you can not be afraid of flooding. Inside the slatted ceiling, it is easy to lay an electrical cable and install lighting. The price of such a system is quite budgetary. Economical options bathroom repair, photos of samples of which will demonstrate the feasibility of such actions, are presented below.

If the ceiling has only minor irregularities, you can simply paint it. To do this, you need to delete the old upper layer coatings, apply a putty, sand the irregularities, and treat with a primer. After that, paint is applied in several layers. This kind of finish will cost you quite cheap, but it looks quite attractive.

Budget floor finishing

The specificity of the bathroom is constantly high humidity with insufficient air exchange. Therefore, the floor covering must be resistant to moisture as well as wear and tear. Best of all, these requirements are met by ceramic tiles. If you are considering a budget option bathroom finishes, you should not purchase expensive tiles of elite classes - it is quite possible to get by with domestic counterparts. In our country, the industry produces a lot of such materials, the cost of which will pleasantly surprise you. In addition, sales are often held in markets and shops, where you can buy wall cladding at a significant discount.

There is an even cheaper floor finish such as linoleum. There is a wide range of such coatings on the market of all kinds of colors and textures. There are even waterproof varieties of PVC linoleum. The main advantage of this material will be that it can be laid literally within a few hours. Linoleum does not require gluing - pressed down with a plinth, it will flatten and level itself.

Wall finishing options

Domestic tile, which can be bought from stock or market leftovers. By purchasing a discounted product, you can save fifty percent of the cost or even more.

A plain tile decorated with friezes or decorative inserts will look pretty decent. And the price will be quite attractive.

Inexpensive repairs in the bathroom, photo samples of which are presented in the article gallery, can be performed by sheathing the walls with PVC panels. There is a huge selection of domestic and foreign samples that deserve attention. Plastic lining is available in all kinds of colors and textures. There are also panels with imitation of tiles, marble or wood.

Professionals recommend choosing materials intended for outdoor use, since the plastic from which they are made is much thicker and stronger, and therefore will last much longer. PVC panels are easy to assemble by yourself. Such work does not require special skills and will take very little time.

With the right approach, reasonable planning and a well-made estimate, it is quite possible to carry out a budget bathroom renovation. The rational selection of building materials and the independent execution of the maximum part of the work will help to significantly reduce financial costs. If you follow the recommendations of experts, beautiful interior will delight your guests and delight you for more than a dozen years.

Painted walls and well-matched accessories will make the design flawless

Many renovation work you can do it yourself

Even from inexpensive, but high-quality materials, you can create a cozy and stylish interior.

Pasting the walls with glass wallpaper will help save money on the repair of the bathroom

A rack ceiling made of plastic in its practicality is slightly inferior to a stretch ceiling

Waterproof linoleum will be a reliable coating for the bathroom floor

Domestic tiles will be cheaper than foreign counterparts

Plastic panels can be used to decorate the walls and ceiling of the bathroom

Smooth ceiling can simply be painted in any color

Performing dismantling work on your own will significantly help reduce costs

You can do without buying new plumbing, and restore the old

PVC panels on the walls will protect them from splashing water and will last for several years

Seamless glossy lining will create the visual effect of a monolithic plane

Preliminary drawing up of a project and a cost estimate guarantees a successful result

Bathroom walls can be painted with acrylic or enamel waterproof paint

August 26, 2016
Specialization: master in the construction of plasterboard structures, finishing works and laying floor coverings. Installation of door and window blocks, decoration of facades, installation of electrical, plumbing and heating - I can give detailed advice on all types of work.

From my own experience, I know that those who decide to make a budget renovation in the bathroom often spend even more than those who do not bother with savings. This is due to a number of factors: from use substandard materials before hiring unskilled workers. I will share my experience of work and tell you how to keep within minimum budget and get great results.

Description of the workflow

To get a good understanding of all aspects of this topic, I will explain with a specific example. So we have:

a typical room in a nine-story building of the P-44 series;
the size of the room is 1.7 by 1.7 meters, the ceiling height is 2.64 meters.

We will consider how much the finishing will cost us, I will not touch on the plumbing, since most often if the repair is done as economically as possible, then these elements do not change.

Stage number 1 - competent organization of the process

If you want to save money on repairs, then these rules should become fundamental for you:

Do it yourself	If we consider the cost of the services of specialists, then you can notice such a feature that their work costs about the same as the materials. And taking into account the fact that we will use the most budgetary solutions, it is easy to guess that you will pay more for the services of builders than for materials. The conclusion is simple: we do everything ourselves and reduce the cost of the project by more than half.
Use quality materials	I talk about how to make repairs using inexpensive, but not substandard materials. In pursuit of savings, many begin to go too far and buy the cheapest options for products, but this is not worth doing, since their reliability and appearance leave much to be desired. I will tell you how to choose good solutions and still pay a little
Observe the technology of work	Below I will tell you how to finish each of the sections, the process is planned in steps, and there is not a single superfluous action in it. No need to miss separate stages, as this will inevitably reduce the quality of work and negatively affect the final result
Don't redevelop	If you want, among other things, to change the layout, then hoping for the cheapest repair is at least silly. Any manipulations with the rearrangement of plumbing lead to the fact that it is necessary to shift communications, and then there is no point in saving, everything must be done expensively and reliably

Another very important recommendation that directly affects the cost of the project is the use of those materials that are easy to work with and that you can lay or attach with high quality. Many times I completed the repair for those who overestimated their strength and, having completed a small part of the repair, realized that they would not master it. Further, of course, you need to spend a lot of money on the wages of the builder.

Be prepared for the fact that you will have to spend a lot of time and instead of cozy calm evenings at the TV you will have to demolish, level, lay, saw, fasten, and so on. There is no free cheese in mousetraps, you will have to pay for the savings with your own time, but if you adopt all the tips from this article, then the costs will be minimal.

You must have a work plan in advance in order to make economical repairs from scratch with your own hands, you need to clearly plan each step and accurately calculate the materials so as not to purchase too much. Just read all of the sections below and you can easily draw up a clear plan based on them.

Stage number 2 - the acquisition of everything you need

I will tell you how the simplest estimate for the renovation of a bathroom is drawn up - the sample can be adapted to your room in order to carry out all the calculations. The estimate is a list necessary materials with an indication of their quantity and cost, since we carry out the work ourselves, it makes no sense to include their cost, unless you appoint yourself a material incentive for a successfully implemented project.

The cost is calculated for individual parts of the room, we will consider each of them and start with the floor. Linoleum will be laid on the floor, we will figure out how to choose it:

Since the room is damp, you should purchase options without a base or based on PVC, since it is not afraid of dampness and mold and mildew do not form in it.
The dimensions of the bathroom are 1.7x1.7, the area is 2.89 square meters, but no one will cut the material according to our sizes, it is sold in running meters. In our case, the optimal width is 2 meters, since there will be the least amount of waste from it, we need 2 running meters, that is, 4 squares;

Having called all the retail outlets, I found a PVC-based option, which cost 224 rubles per square meter... On examination, I made sure that the surface is strong without damage and defects, the substrate is elastic, and the material. As a result, I paid 896 rubles for 4 squares;
To make the joints of the floor and walls neat, a plinth is needed, I found a plastic "Comfort" for 56 rubles apiece 2.5 meters long. We need to close 3 walls, and on the fourth, there is a 60 cm wide door with 8 cm cakes, that is, the opening takes 76 cm.The opening is not located in the corner, so on one side you need 20 cm of plinth, and on the other 76 cm, that's enough for us waste from elements that will go to the walls;

As a result, you need to purchase 3 plinths of 56 rubles each, 4 inner corners of 35 rubles each and two plugs - right and left for adjoining the door frame, they cost 27 rubles. Adding all the results, we get (56x3) + (35x4) + (27x2) = 362 rubles;

To fix the plinth, we will use liquid nails, I bought a convenient 200 ml tube for 104 rubles.

Now let's summarize all the costs: 896 + 362 + 104 = 1362 rubles I spent on finishing materials for the floor, if we compare with ordinary projects, the amount is several times less.

We will level the ceiling with putty and paint with moisture resistant white, so we need the following materials:

To level the surface, I use the Vetonit VH compound, which is intended for use in damp rooms and guarantees a reliable result. The ceiling did not have significant irregularities, therefore, one bag of the composition weighing 20 kg is enough, which costs 456 rubles;

For coloring, we need paint for wet rooms, I chose the latex-based option. You need to apply the composition in 2-3 layers, so I bought a 3 kg package, for which I paid 190 rubles;

For surface treatment and its strengthening, a primer is needed, I bought 900 ml of Tikkurila products for 124 rubles, which is quite enough for our purposes.

Now we sum up all the costs: 456 + 190 + 124 = 770 rubles we need for the ceiling.

Let's move on to the most costly part - the walls, for them I chose PVC panels 250 mm wide and 2.7 meters long - there will be a minimum of waste. This material is not afraid of moisture, it is easy to wash it, so it is perfect for the bathtub.

Let's figure out what we need for work:

It is necessary to calculate the number of panels, with their width of 250 mm, you need to divide the length of the walls by this indicator... But do not forget that on one of the surfaces there is an opening with a size of 700x2100, on one side of it there will be one entire panel, on the other three, and above the doors you will need three pieces of 540 mm in length, that is, we will cut one element. This means that we need 4 whole panels on the wall with a door, remember this number and move on;
Divide the wall length of 170 cm by 25 cm, we get 7 panels, this result is multiplied by 3 and we get 21 pieces. We add 4 panels from the above paragraph and we get 25 elements - this is how much is needed to decorate the walls in the bathroom. I found products for 127 rubles apiece, the total cost was 3175 rubles;
For installation, we need components, first of all, this is an inner corner, these elements are sold in pieces of 3 meters and cost 50 rubles. We need 4 pieces, that is, the costs will be 200 rubles;
Above, below and along the perimeter of the opening, I decided to put a starting profile, which is sold in pieces of 3 meters, 4 elements are needed upstairs, 2 elements are needed to frame the doorway, pieces can be joined at the bottom, since this part will be covered with a plinth, but you still need 1 a whole piece. In total, 7 starting bars are needed, the costs at a price of 45 rubles will be 315 rubles;
We will fix the panels on a 25x50 mm bar, it will be positioned horizontally with a step of 30 cm so that the surface is strong and does not bend. With a height of 264 cm, you need to fix 9 rows, we count in running meters 9x1.7 = 15.3 meters, multiply by 3 whole walls and get about 46 meters;

On the wall with the door, the material will go less, 3 pieces 170 cm long, 6 pieces 80 cm long and 6 pieces about 20 cm long.In addition, you need to nail vertical slats along the opening, 2 pieces 210 cm each for its reliable framing. As a result, we get the following result (170x3) + (80x6) + (20x6) + (210x2) = 1530 cm or the same 15.3 meters;
Summing up all the numbers, we get 61.3 meters, the bar is sold in pieces of 3 meters, that is, we need 21 pieces. Our lumber of this type costs 40 rubles apiece, that is, I spent 840 rubles for the entire volume;
I will fix all the elements using a stapler, I will need staples, a package of 1000 pieces costs 45 rubles, and this is quite enough for the work.

The block will be fastened with 6x50 quick-assembly dowels, about 200 of them will go to all walls, at a price of 25 rubles, the cost is 500 rubles.

Let's calculate all expenses: 3175 + 200 + 315 + 840 + 45 + 500 = 5075 rubles.

For clarity, I will show all the results in a pivot table:

Bathroom floor
Material name	Quantity	Amount, rubles
Linoleum	4 sq.	896
Skirting board 2.7 meters	3 pcs.	168
Internal corner	4 things.	140
Cover cap left and right	2 pcs.	54
Liquid Nails	200 ml.	104
Ceiling
Putty "Vetonit VH"	20 Kg	456
Latex paint	3 Kg	190
Strengthening soil	900 gr.	124
Walls
PVC panels 2500x250 mm	25 pcs.	3175
PVC inner corner	4 things.	200
Starting bar	7 pcs.	315
Edged bar 25x50x3000 mm	21 pcs.	840
Staples, unitary enterprise 100 pieces.	1 pack.	45
Fast mounting dowel 6x50	200 pcs	500
TOTAL:		7207

As you can see, cheap do-it-yourself bathroom renovation is not a fantasy or a fairy tale, while I did not use the cheapest compositions and materials, everything that I purchased is of good quality and attractive appearance.

Stage 3 - dismantling of old coatings

You cannot carry out work without removing the old tile or removing the worn out floor covering. Of course, if your floor or ceiling is in good condition, then it makes sense to leave them. For example, if the tiles on the floor look normal, you can freshen the surface by removing the old joint and filling the joints with a new compound. The same applies to the ceiling: if it is even, then you can remove the old coating and paint it again.

But in practice, most often it turns out like this, then you need to do the floor, and the walls, and the ceiling, so I will consider just such an option, before making a budget repair, you will have to sweat to remove the remnants of old coatings.

There are such works to be done:

On the ceiling, most often there is an old whitewash or paint that has turned black from time to time. Sometimes there are many layers on the surface, and it takes a long time to remove them. I use a scraper, but you can use a spatula, knife and any other device convenient for you, the main thing is that you can remove the old coating;

Old whitewash and water-based paint will come off much easier if the surface is thoroughly moistened and left for 20-30 minutes.

As for the walls, they can either have many layers of paint and whitewash, or old tiles. The compositions are cleaned off as described above, but you will have to tinker with the tiles; for work it is best to use a perforator with a special spatula. If there is no power tool, then you will have to work in the old fashioned way - with a hammer and a chisel, the work is tedious, but one way or another it needs to be done;

Last but not least, the surface of the floor is prepared, in my case there was linoleum, so the work was simple: I removed the old coating and got a flat surface, completely ready for work. If you have an old tile, you will have to tinker with removing it from the surface; the same tools are used for work as in the paragraph above.

Naturally, you need to take out all unnecessary things from the room, you should only have prepared walls.

Stage number 4 - finishing the ceiling

It is from this part of the bathroom that I advise you to start work for the simple reason that a lot of dust will form in the process, and the putty may fall down. The finishing option I am considering is the most budgetary one - you can achieve an excellent result with your own hands for the simple reason that the ceiling area is small and it will not be difficult to perfectly align it even with a lack of experience.

The instructions for carrying out the work look like this:

First you need to check the plane with a level or flat bar to see what irregularities need to be eliminated;
The surface must be treated with a primer to strengthen and remove dust, the composition is applied with a brush and dries for about an hour;
Then the composition is prepared, it remains plastic for a couple of hours, so I advise you to make no more than 5 liters at a time, your work speed will be low, so you are unlikely to use up more. All the features of mixing the composition are indicated on the packaging, so there should be no problems with this part of the work;

With the first layer, you need to eliminate all significant irregularities, if they are not there, then just putty the entire surface, creating a kind of base, do not worry about stains, they will be eliminated. After the surface dries, the beads are easily cut off with a spatula, after which you need to check it with a level again;
The second layer should level the ceiling, try to do the work neatly, there may be sagging on the surface, but there should be no holes, since it will not be possible to eliminate them. In extreme cases, you can walk a third time if the ceiling was uneven and you have to display a plane with large drops;

After drying, the dirtiest part is ahead - grouting the surface, save a respirator and goggles, as during grinding, dust will fly into the eyes and get into the respiratory tract. In order to control the plane, use a simple technique: hold a light bulb near the surface, it perfectly shows all the irregularities and allows you to perfectly level the surface at a time;
After finishing work, the surface is cleaned with a brush or a broom, after which it can be painted. The work is carried out in 2-3 layers, you can use both a brush and a roller, it all depends on convenience. Each subsequent layer is applied after the previous one has completely dried.

Stage 5 - flooring flooring

When considering how to make a floor sparingly, linoleum will always be out of competition, not only due to its low price, but also the reliability and durability of the coating. It is very easy to apply this covering in the bathroom:

The surface is cleaned of dust and debris, it can be wiped with a damp cloth to clean as best as possible;
Next, the material is spread, it will go onto the walls, so you need to position it evenly, after which the excess is cut off with a construction or any other sharp knife. Do this carefully, as it is unlikely that you will be able to glue what was cut off by mistake;

We have no joints, which simplifies the process, the only thing is in doorway you may need to fix the material, for this you can buy a metal nut.

Due to the fact that the area of the room is small, plus there will be a bathtub on the surface, there is no need to glue the linoleum, but if you want to strengthen the coating, you can use double-sided tape. The skirting board will be fixed later, at this stage this stage can be considered completed.

Stage number 6 - wall decoration

First, a diagram of the process is presented, and below each stage is detailed:

The frame is set according to the level, when fixing the elements, you can put chips and pieces of wood under them to display the ideal plane. A hole is drilled in the bar, then a hole in the wall is drilled right through it and a fast-mounting dowel is hammered. You can fill your hand in literally 10 minutes, so the process will be quick;

Then the corners are attached in the corners, and from above and below, as well as along the perimeter of the opening, the starting profile... The main thing is to precisely cut the bar at the joints so that everything looks neat. Fastening is done with a stapler, it is very fast and very reliable;
A panel is inserted into the upper and lower guides and inserted into the corner, after which it is fixed with brackets to the bars. The work is done so until the entire wall is finished, the last plank is trimmed so that it is 3-4 mm wider, the corner or starting profile is slightly bent and the element is in place. Plastic bends well, but you shouldn't be too zealous, do everything carefully.

After finishing the wall decoration, you can glue plastic skirting board, do not forget to put corners and plugs so that all elements fit perfectly together.

This is a simple example of how to make a cheap renovation in a bathroom, even if you spend 1-2 thousand more, but still the costs are not comparable with those that you would incur using standard materials and hiring builders.

Conclusion

Transforming a bathroom, while spending a little more than 7 thousand, is quite realistic, and I showed this with a specific example. I tried to tell you about everything in detail so that you can understand the topic, and the video in this article will clearly show some important points so that you even better understand some of the nuances. If you have any questions, write them in the comments below.

August 26, 2016

If you want to express gratitude, add clarification or objection, ask the author something - add a comment or say thank you!

Self-repair of a bathroom: how to choose budget materials

Today, the industry produces building materials of all kinds of price categories, designed for consumers of very different levels of income. These can be goods of economy, standard and elite classes. There are also very cheap materials on sale, but their advantage is only in their low price. The quality and appearance of such products do not stand up to criticism.

Performing dismantling work on your own will significantly help reduce costs

You can do without buying new plumbing, and restore the old

If you decide to carry out a budget bathroom renovation, photo samples of which can be seen in the gallery of this article, you should not purchase building materials of the elite classes. Their quality is not higher than that of budget products, and they benefit only due to their aesthetics.

Painted walls and well-matched accessories will make the design flawless

Cost-effective repairs possible

The main part of the costs is made up of the following items:

the price of the work performed;
the cost of building materials and transport services.

Thus, it is quite possible to reduce the cost of repairs, and you can save on both points. If you carefully study the information on how to make budget repairs in the bathroom with your own hands, you can come to the conclusion that most of the work is fairly easy to do on your own, significantly reducing costs.

Many repairs can be done by hand.

Please note that the cable must be of good quality and well insulated. Only solid wire segments can be used, and the distribution box must be placed exclusively outside the bathroom.

Question, how to make cheap repairs in the bathroom with their own hands worries many owners. To prioritize savings and the quality of room decoration, you should adhere to the following recommendations:

Do-it-yourself work... It is advisable to carry out most of the repairs yourself, since the prices for the services of specialists can exceed the cost of materials. It is better to carry out all dismantling work on your own.
Having your own instrument. It is necessary to think over the design features of the repair in such a way as to minimize dismantling work. A basic set of tools will help make the task easier and faster. In addition, it will significantly reduce financial costs. It is recommended to acquire at least a minimal set, which will include a drill with a set of drills (preferably a percussion drill), a hammer drill with bits, a cut-off grinder with discs for metal and concrete.
Economical materials. The purchase of budget building materials will help significantly save money. But there are things that are not worth saving on, since the subsequent replacement can cost more than the initial purchase of quality products. But in some cases, you can cut costs wisely.

Reducing financial costs for bathroom renovation

If you need to renovate your bathroom cheaply and qualitatively, pay special attention to scrupulous planning of expenses. A detailed estimate will help you significantly save money. It is necessary to conduct a thorough comparative analysis of the price policy of the market. In addition, on the Internet, as a rule, you can purchase many materials at a significant discount, especially when purchasing in bulk.

Even from inexpensive, but high-quality materials, you can create a cozy and stylish interior.

To revive the boring interior and diversify the surface statics, experts recommend purchasing inexpensive accessories and little things that will add coziness to the room and become an appropriate addition to the design. Shelves, hooks, soap dishes, rubber rugs, curtains and other decorative items can become additional convenience and decoration.

You should not buy building materials and equipment from well-known manufacturers, since you will have to pay extra for the name. Branded items are a priori more expensive. It will be much more profitable to purchase building materials produced by domestic companies, as well as those produced by our closest neighbors - Poland, Czech Republic, Finland. These will be quality, certified products. Of course, we are not talking about goods from China in the lower price segment. However, their products of average cost will be quite good quality. Remember not to sacrifice quality and aesthetics for the sake of economy.

Pasting the walls with glass wallpaper will help save money on the repair of the bathroom

We save on ceiling repairs

To decorate the original and unusual interior of the bathroom, and at the same time save money, you should first pay attention to cheap methods of decorating the ceiling in the room.

Smooth ceiling can simply be painted in any color

Stretch structures look attractive and rich, but they are distinguished by their high cost. However, the appearance of the plastic panels is no worse. An important advantage of suspended systems is that with their help any irregularities on the plane of the ceiling are easily leveled. In addition, this type of finish allows you to create multi-level structures. PVC lining belongs to moisture resistant materials, that is, you can not be afraid of flooding. Inside the slatted ceiling, it is easy to lay an electrical cable and install lighting. The price of such a system is quite budgetary. Economical options for repairing a bathroom, photo samples of which will demonstrate the feasibility of such actions, are presented below.

A rack ceiling made of plastic in its practicality is slightly inferior to a stretch ceiling

If the ceiling has only minor irregularities, you can simply paint it. To do this, it is necessary to remove the old top layer of the coating, apply a putty, sand the irregularities, and treat with a primer. After that, paint is applied in several layers. This kind of finish will cost you quite cheap, but it looks quite attractive.

Budget floor finishing

The specificity of the bathroom is constantly high humidity with insufficient air exchange. Therefore, the floor covering must be resistant to moisture as well as wear and tear. Best of all, these requirements are met by ceramic tiles. If you are considering a budget bathroom finish, you should not buy expensive tiles of elite classes - it is quite possible to get by with domestic counterparts. In our country, the industry produces a lot of such materials, the cost of which will pleasantly surprise you. In addition, sales are often held in markets and shops, where you can buy wall cladding at a significant discount.

Waterproof linoleum will be a reliable coating for the bathroom floor

Wall finishing options

Domestic tile, which can be bought from the remains in the market or warehouse, will be the optimal in terms of price-quality ratio. By purchasing a discounted product, you can save fifty percent of the cost or even more.

Domestic tiles will be cheaper than foreign counterparts

A plain tile decorated with friezes or decorative inserts will look pretty decent. And the price will be quite attractive.

Plastic panels can be used to decorate the walls and ceiling of the bathroom

Professionals recommend choosing materials intended for outdoor use, since the plastic from which they are made is much thicker and stronger, and therefore will last much longer. PVC panels are easy to assemble by yourself. Such work does not require special skills and will take very little time.

With the right approach, reasonable planning and a well-made estimate, it is quite possible to carry out a budget bathroom renovation. The rational selection of building materials and the independent execution of the maximum part of the work will help to significantly reduce financial costs. If you follow the recommendations of experts, the beautiful interior will delight your guests and delight you for more than a dozen years.

If a bathroom renovation is planned, then most people associate it with tiles. Indeed, in most cases, the customer prefers this particular material as a finishing material. But on the tile, the light did not converge like a wedge, because repairs in the bathroom can do without this material altogether. In this article, we will raise the question of how to repair a bathtub without tiles.

Immediately I would like to note that the Teplo Dom company is engaged in repairs. We have all the necessary specialists to make a turnkey renovation. We will take into account all your wishes, draw up a project, make an estimate, purchase materials and do exactly what you ask.

Tiling: cons

Decorating walls in a bathroom with tiles is one of the most common solutions. We will not talk about the pros now, there are actually enough of them. There are people who, for some reason, want to renovate a bathroom without tiles. We do not intend to persuade them, on the contrary, we will highlight the disadvantages of this method.

First of all, I would like to note that tiling implies the whole stage of preparing the walls... The old coating is removed, the walls are leveled and only then can be veneered.

Tiling is quite expensive. Here we are talking not only about the price of the material, but also about the cost of the work itself. A good tiler is not cheap.

For example, if the tile is used as flooring, then you definitely need insulate plus look towards the "warm floor" technology. The point is that ceramics have high thermal conductivity. If nothing is done, the coating will be cold.

Tile itself is a fragile material... It must be transported carefully, and care must be taken when carrying out work.

Ceramic tile utterly does not create sound insulation.

And the most important thing is lack of customer desire use this material as a finishing material.

Of course, the tiles have a lot of advantages that actually take this material to the 1st place when it comes to finishing in the bathroom, but you can read about them in the following articles: "", "".

But if not tiles, then what? You may not have known, but there are more than enough options.

Plastic panels

How to renovate a bathtub without tiles? The answer is simple: use plastic panels instead. Lately this way finishes have gained immense popularity. Firstly, due to the ease of installation, secondly, the absence of the need to align the walls, and thirdly, because of its price. Yes, the cost of finishing a bathroom with plastic panels will be much lower than with tiles. In turn, PVC panels have whole line positive properties:

The material is resistant to temperature extremes.
Has good moisture resistance.
It's cheap.
Wall cladding with plastic panels can be done by hand.
It is easy to hide the unevenness of the walls.

Of course, there are also negative moments. Among them, the lack of strength, installation "eats up" a lot of useful space, and so on. But if you give up tiles, then it is better in the direction of plastic panels. You can read more about how Teplo Doma decorates a bathroom without tiles using PVC panels in the article - "".

Dye

When you need to save money on renovating the bathroom, it is better to opt for a moisture-resistant latex or acrylic paint... If you need a simple solution, then paint is perfect. A bathroom that has been finished without tiles with paint can look just as good as with plastic panels.

Advantages:

It's pretty easy to maintain the walls.
You can choose any color.
Repair work can be done by yourself.
Low cost.

Repair in the bathroom without tiles photo

Self-adhesive film

A great option to renovate the walls in the bathroom without tiles is to use self-adhesive tape. It is easy to do, it is inexpensive, and it looks quite acceptable.

Bathroom renovation photo without tiles

Linoleum

Oddly enough, not only can there be linoleum on the floor. Some people prefer to use this material for wall decoration in the bathroom. Linoleum looks quite attractive, is inexpensive, and has been serving for more than 10 years. It is easy to take care of such a coating, and repairs can be done by hand.

Did you like the article? Share it

Print article