Arranging a garage with your own hands - a functional and beautiful "motorhome"! Man's idea of ​​order: how to equip a garage inside - photo Equipping a workplace in a garage.

How to equip a garage with your own hands is of interest to many of its owners. It is known that a garage for a car enthusiast is a second home.

This building is intended for the safety of the car, this is the place where its owner arranges a mini-workshop, where you can make repairs, and sometimes equip a small corner for yourself to relax. How to properly equip a garage is invited to get acquainted from this article.

Basic provisions for arranging a garage

The main condition for building a garage is to keep it warm and dry. Even in the most severe frosts, the car should not freeze through. If possible, you need to arrange.

In addition, it is necessary:

• Protect the premises from the penetration of strangers.
• Provide free and convenient access to equipment and tools.
• Think well what homemade garage equipment you will need to repair your car. Where is it better to place it.
• Where to install racks, hang shelves, arrange a workplace.

The arrangement of a viewing hole and a workbench with tools can complement the garage equipment.

How to place racks and shelves

Ensuring maximum comfort in your garage is possible if there is enough free space, which is often difficult. A large space is occupied by the storage of equipment and working tools.

Therefore, if we equip the garage with our own hands, we should allocate as much space as possible for shelves or racks (see), but at the same time it is necessary that they make it possible to move freely around the room.

You can hang shelves wherever no one will cling to or hit them:

• Above windows, if any.
• Above the tables.
• Shelving as shown in the photo.

Tip: When installing shelves, the distance to the machine on each side should be at least one meter.

• It is convenient to use the wall farthest from the gate to place shelves. Here you can store a compressor, working tools, set up a workbench - everything is at hand and does not interfere with movement in the garage.
• With a large number of shelves, it is worth installing a small cabinet where you can hang work clothes, store rags.

How best to equip an inspection pit

Before proceeding with the arrangement of the inspection pit, it is necessary to decide what kind of homemade garage equipment can be placed there and the expediency of this. It makes no sense to carry out the arrangement of a viewing pit for someone who often uses a flyover on the street.

When deciding that such a pit is needed, one should consider:

• Its walls and bottom are made of concrete.
• The edges are reinforced with metal corners.
• The inspection pit should be closed when not in use.

Tip: To collect water that accidentally fell down, you should arrange a drainage hole in the corner of the pit of such a size that it is convenient to scoop out the accumulated water from it. To protect it from accidentally hitting it with a foot, the hole is covered with a lattice.

In the inspection pit you can:

• Place homemade garage equipment that will be needed during the repair.
• Arrange niches in the walls where it will be convenient to fold the tool used.
• It is worth taking care of the pit lighting. Here lamps are installed or a place is arranged for the location of a portable lamp.

For minor jobs under the hood, changing a disc or changing a wheel, a standard set of tools and a jack are enough for a car enthusiast. And to perform more complex work, you need to use special garage home-made equipment.

What special equipment should be used in the garage

Convenient add-ons for equipping a garage with your own hands are:

• Crafting table... It is better to use wood and metal for its manufacture. Covered with a metal sheet work zone, which protects the tree from premature wear. It is better to make a workbench with two or three levels in order to place as many necessary things as possible in it.
• Welding machine.
• Water / oil separator... It can be used to remove vapors, oil droplets, water and other small particles in the air. Such a device is quite convenient to use when painting a car to evenly distribute the paint over the metal.
• Washing... Such homemade garage equipment is necessary to care for the appearance of the car. In this case, a hose or pipe is supplied to supply water to the garage and a drain is arranged into the sewer.

Tip: When organizing a car wash, you should carefully protect electrical wiring and lighting.

How to make high-quality ventilation and lighting

Well-organized ventilation:

• Will rid the room of harmful and unpleasant odors.
• Protect it from dampness and dustiness (see).

Ventilation openings are usually made on either side of the gate, close to the floor surface and covered with grilles. On the opposite wall, the same holes are made, but under the ceiling.

The best lighting is natural, so it's best to consider having a window in your garage.

In the absence of such an opportunity, several lighting zones should be made:

• General.
• Above the workplace.
• Portable, used for illumination in the most necessary case.

How to arrange a work space in a garage

When arranging a workplace, the most important thing is to provide as much free space as possible.

In the garage, space is occupied by:

• Automobile.
• Its removable rubber.
• Crafting table.
• Tool kits.
• Unnecessary items may be stored
• The pit is used as a cellar.
• The walls are hung with garden tools.

If the garage is located on a private plot or cottage, then there is most likely a cellar, a shed, a warehouse or utility rooms to clean up the excess here, and completely unnecessary things should simply be thrown away.

If necessary, it is done:

• Repair of the garage.
• Warming of all its elements.
• Interior decoration.

After that, the workplace is set up.

There should be:

• Comfortable.
• Cosy.
• Provided with all the necessary things that are required specifically for the owner of the garage, which is associated with the different interests of the owners of the premises. Some will repair old receivers, others will repair garage equipment, some will do woodcarving, and some will be more interested in modernizing garden tools.

There is no specific instruction for organizing a workplace. Here everyone decides for himself what he needs. But some recommendations should be taken into account.

These include:

• The device of a comfortable desktop, which can be a ready-made workbench.
• The table should have several drawers where small work accessories will be placed:

1. tools;
2. different fasteners;
3. jars of solutions;
4. diodes and other little things.

• Place shelves and hooks above the table, as shown in the photo.

It should be noted that it is important how the tools and accessories will be located, but it should be determined and what they will be. In addition to the standard set, the interests and personal requirements of the garage owner are taken into account.

Most likely you will need:

• A hammer.
• Set of screwdrivers.
• Pliers.
• Nippers.
• Spanner keys.
• Soldering iron.
• Bulgarian.
• Electric drill.
• Jigsaw.
• Screwdriver.
• More serious equipment and machines.
• Accompanying accessories: vices and clamps.

In addition to arranging the workplace, if there is free space, you can provide a rest corner.

How to equip a room in the garage can be seen in the video.

In addition to the purchased standard set of tools, many motorists make some accessories themselves. It can be unique wrenches, for dismantling and installing car components, you will need a puller and other small devices.

More sophisticated equipment includes home-made welding machines, compressors, filters for cleaning compressed air from condensate and oil vapors. A comfortable, cozy and multifunctional garage is the dream of any car enthusiast.

A garage is more than a car home. People who need to increase their living space are very resourceful. For a billion reasons, many people do not want to invest in real estate today. The family grows, children appear, and there is less and less room for existence. Active teenagers and nearby grandparents need a separate room.

All this radically changes the face of the modern family. But, unfortunately, you cannot move for personal or financial reasons, even if the need to increase the living space is great. The solution to the problem is very close, it is worth literally going beyond front door, go down the steps and into the garage.

1. Cozy space for a widowed old man

In this design, the garage itself does not undergo changes, the car can still remain inside. But the attic above it from the place where the old rubbish was kept turned into a room. As a result, it turned out to be warm and cozy, with a panoramic view from the windows on the facade of the building.

Built-in storage cabinets a large number things are placed under the eaves of the roof, which additionally frees up the territory.

2. Office space

Making a cabinet out of a garage was a natural decision for a homeowner in Eindhoven, Holland. The internal space was actually expanded by replacing the gate with sliding windows... As a result, it was filled with fantastic light and air.

The roof has been raised at the corners to provide additional sunlight. To maintain confidentiality, we used a roller shutter, which serves as a screen.

3. Living room

In this renovated space, the concrete floor was completely destroyed as it was sloped. Hardwood boards were laid in its place. Life and warmth returned to the room. For convenience and functionality, air conditioning and plumbing are located here. The gates have been replaced with large double doors that look great.

4. Excellent home

Previously, it was a dilapidated structure in the city of Bordeaux, France, which is now magically transformed into a beautiful modern building. To make it comfortable to live in, it was supplied with electricity, running water and heating.

The space was divided into sections in accordance with their purpose. In this room, along one wall, there is a kitchen with all the necessary electrical appliances. It can easily accommodate 6 people at lunch.

In the center of the 12x10x10 m square rises a wooden cube that hides a shower, a bathroom, a drainpipe, washing machine, dressing room and toilet. The table, cabinets and sofa are located on the right outer side of it. Wooden ladder leading to the bed in the upper tier of the cube is located on the left.

5. Add spaces

The former car home has joined the ranks living rooms as a result of the reconstruction of the estate. The family's dwelling was in need of rebuilding, but at the same time inside it had spacious wooden floors and it was beautiful. The goal of the project was to preserve the historical core of the house, and a new space was added to it.

It cannot be assumed that this place has the skeleton of an old garage with a pile of metal and a concrete floor. Now, thanks to the creative ideas of the architect, wide plank floors, graceful high ceilings with antique beams and even a fireplace have appeared here.

6. Bunk apartment

In northern Italy, in the city of Cuneo, is an elegant bunk apartment that used to be a parking lot. A beautiful sculptural staircase connects the common area of ​​the first level with the personal space of the second, through decoration and color. Downstairs, the seating area is separated from the dining area by a wide column that houses a stunning transparent fireplace.

Ceiling decorated wooden beams, giving a feeling of lightness and spaciousness. This is accentuated by natural light pouring through glass windows and doors.

7. Unusual tiny house

Some will find it extreme, too simple and tiny. All the items in this "apartment", converted from the garage, were found in a junkyard. Old things in the interior have found a new life.

Indoors, there is a functional kitchen complete with an industrial sink, ceiling lamps and wooden wine boxes. Only metal shelves and countertops are new. Raw food practitioner Mrs. de la Varga became the owner of this home in Seattle. All she lacks is a blender and a stove for boiling water.

8. A place for children to play

The project was developed by the architect Margaret Menter for two-story garage... A multipurpose pavilion was formed from it in order to involve the family in creative and physical interaction. It is allowed to do everything here - the room is easily transformed and changes its purpose. The space is used for reading in hammocks, parallel bars and climbing rope. It is not forbidden to just run freely. Family movie screenings are often arranged. The pavilion has a bathroom and toilet.

9. Charming cuisine

Once the tiny junk-filled utility room has turned into an adorable kitchen. Its windows open onto a well-kept backyard, allowing natural light to fill the room. The project, carried out by the architect Thomas Ahmann, was quite complex.

The original narrow structure was L-shaped. The designer solved the problem by dividing the kitchen into separate zones, designed in the same style. There is a work area, a seating area, a bar counter, a hallway, while leaving an area for free movement. In the far corner is a large practical table from recycled wood.

10. Trendy and popular restaurant

In the photo we see the very famous ASTERISK restaurant in Newport, USA. It is located in an old service garage. Large windows and an open floor plan create a wonderful ambience that the city calls the most unique.

For those who like to dine outside, there is a summer terrace. The design of the restaurant is pleasing to the eye. Inside the premises, an open bar and kitchen appear before your eyes, where it is pleasant to watch the professional work of the chefs. The culinary specialists here are renowned for their creative combinations of fresh herbs and classic sauces.

You can make anything out of a car house: a dance and yoga studio, an art workshop, a cinema, or a nursery. What would you, dear readers, do if you had the opportunity to change the design of the garage with your own hands?

A garage is a home for a car, a repair shop, and a hobby club. That is why the arrangement of a garage box must be thought out to the smallest detail. On a not very large area, it is necessary to place a lot of objects so that, if necessary, everything is at hand.

A small instruction for arranging a garage will help to cope with this task. You do not need to have great skill skills, you just need to apply maximum imagination and minimum effort. But first of all, let's decide where to start.

The division of the garage space into zones is as important as the distribution of free space in the apartment. If you correctly determine the purpose of each meter of garage area, it will be quite simple to arrange a workplace. All that remains is to install convenient racks and additional auxiliary elements.

The walk-through area is a free space. It is advisable to place a clothes hanger there. Everyday little things are in the easy access area. Items that are in everyday demand will be placed here.

If there is a need to equip a viewing pit, it should be foreseen how it will be closed.

The main thing is to create good ventilation. This will prevent dampness and mildew in your garage as well as get rid of unpleasant odors.

Before starting the interior decoration, it is necessary to draw up a plan, where all stages of work will be clearly distributed step by step.

Interior decoration

The garage room is always an increased danger, since it contains fuels and lubricants and, quite often, welding machines. Therefore, some conditions apply to finishing materials.

The main thing they should be:

• fire resistant;
• durable;
• resistant to the influence of various factors.

Moreover, the finishing material should be easy to clean and not absorb odors. Not all materials have such qualities.

Suitable building material:

• Plaster mixes. The ideal base, will hide all the irregularities and defects in the walls.
• Thin sheathing board (lining). It is used for both interior and exterior decoration.
• Tile. Here you have to work hard, and the cost is not suitable for everyone. At the same time, ceramics are a profitable option. It is non-flammable, easy to clean and durable. If the walls of the garage are tiled, you can forget about repairs for many years. Garage decoration

Planning your garage space is always thought provoking. Especially those who keep order in everything. It will not be difficult to equip a garage with your own hands if you know some tricks in arranging work areas. It is always possible to allocate some space for the necessary tools.

Ideas for a garage with your own hands are so diverse that you can discuss it for a long time.

If you are repairing your car yourself, then you just need a workbench. It can be made from wooden blocks of the required parameters. But the table top must be made of metal.

Great importance is attached to the arrangement of shelves and racks. They are given the main place in the room. It is preferable to install such structures along the walls. The photo shows options for arranging a garage.

You can visually expand the garage space with the help of hanging shelves from metal mesh... You can put old things there that will still come in handy.

Lettering and original stickers will help you place all items by type.

Small metal parts will always be in place when placed on magnetic tape.

Hanger hooks can be made from old wrenches. They will perfectly fit a rubber hose or overalls.

Old plastic jars can be used to store nails, screws, and similar small items.

A distribution panel, like an organizer, will become a source of pride and a stylish decoration for your modern garage box. To do this, it is necessary to fix a metal sheet with through notches on the wall and put hooks into the holes. From now on, all the tools and items that you use most often will always remain in sight.

Bicycles and other sports equipment always occupy a certain area. They can be hung on sturdy brackets. So you will save square meters and achieve order in your small area.

: practical advice and photo ideas

Primary requirements

It is necessary that the structure was erected in compliance with all fire safety rules. Arrangement of a garage inside without taking into account existing standards can cause accidents.

Free access to equipment and working tools must be organized. To prevent the vehicle from freezing even at very low temperatures, it is worth installing equipment for quickly warming up the room. It should always be dry and warm inside the building.

Finishing

The first thing to do is purchase materials for finishing the garage. The main requirement for raw materials is its practicality. The finish should be non-marking, easy to maintain and attractive from an aesthetic point of view. When choosing materials, you need to pay attention to them:

• incombustibility;
• immunity to the effects of chemical environments;
• resistance to mechanical damage;
• wear resistance and durability;
• environmental safety.

When processing walls in a garage, you can use:

Plaster is one of the most common and cost effective ways to level walls. We must not forget about the need to apply the top layer of facade paint, which will avoid cracking and shedding the surface.

For the northern regions of the country, the use of lining is perfect. This is due to the fact that there is room between it and the profiles for the thermal insulation material. The disadvantages of raw materials include its not very high strength.

When thinking about how to equip a garage, you can consider such an option as using ceramic tiles. The advantages of this material include:

• fire safety;
• ease of care;
• high strength and durability.

However, this is a rather expensive option. Due to the large weight of the material, it is initially necessary to calculate the strength of the walls of the building.

Room layout

Many motorists are interested in the question of where to start arranging a garage? When drawing up a building plan, it is necessary to conditionally divide it into the following zones:

• area for personal transport;
• working area;
• free zone.

The area designated for the car and the small area around it must be kept clear. The next thing to do is decide on the number of working tools that will be stored in the garage. For convenience, it is worth placing items as they are applicable.

If the room has a basement, it is worth equipping it with racks or shelves. This will provide an opportunity to get additional storage space for tools and other automotive paraphernalia.

Ventilation

Having started repairing the garage with your own hands, photos of which will help you deal with all the intricacies of the planned case, you need to know that
a ventilation system is necessary in order to avoid high humidity and dustiness in the room, as well as get rid of unpleasant odors. Ventilation holes should be made on both sides of the gate on low height and also on the opposite wall under the ceiling. The openings are usually covered with grilles.

Lighting

Making out the garage equipment inside, it is necessary to resolve the issue of its consecration. One of the best options is to install a window that allows daylight to enter the room. Artificial consecration is usually divided into three zones: above the working area, general and portable.

Drainage system

When making garage equipment with your own hands, you need to install a drain. Installation of a drainage gutter will prevent water from running down the walls of the structure. To install the sink, you need to bring it to the garage water pipe or hose. It is important to properly organize the drainage of used water into the sewer system.

Observation pit

When arranging the garage with his own hands, the driver should remember that the presence of a viewing hole is not necessary if an overpass located on the street is most often used. If you need to equip it, you need to know that the walls and floor of the pit should be concreted. Iron corners are used to strengthen the edges. For the convenience of conducting renovation works, niches can be mounted into the walls in which tools will be stored.

The inspection pit should be insulated. To do this, using special glue, expanded polystyrene is attached to its walls. The pit must be closed. The top edge of the cover should be flush with the floor.

A drainage hole is located in the corner of the viewing hole, water that has fallen down is collected in it. The depression should not be too small so that water can be scooped out of it. The hole should be covered with a lattice. A lamp or a portable lamp is used to illuminate the inspection pit.

Racks

To always have order in the garage, it is necessary to correctly organize the storage system. Plays an important role right choice shelving. In the modern market, you can find a wide range of metal and plastic structures of this kind. Shelves are great for storing tools, accessories vehicle, garden tools. When purchasing them, you should pay attention to the size of the structure. Also an important indicator is the distance between the shelves, it is better if it can be adjusted. This will allow you to store items of various sizes. To make the racks take up as little space as possible, it is worth placing them around the perimeter of the walls.

Shelves

Those who are interested in the question of how to equip a garage inside with their own hands should think about installing shelves. This is a good alternative to shelving, given that you can make them yourself. Before installing the shelves, it is necessary to check the strength of the walls. Having found irregularities, it is worth treating them with plaster. For ease of use, the shelves should not be too high. But in order to save space, you can place several pieces under the very ceiling and store items that are not used very often on them. The distance from the shelves to the vehicle must be at least one meter.

For tools, it is worth buying or making special shelves equipped with holes for screwdrivers, punchers, etc. Some may be attracted by the option with closed shelves assembled from unnecessary hanging cabinets.

Perforated slabs

Perforated plates equipped with holders are very popular today. different lengths... The device is well suited for storing ladders, helmets, garden tools, etc. By equipping the plates with hooks, you can make room for:

When fitted with sturdy brackets, the plates can be used to store wheels or bicycles.

Suitable furniture

Having taken up the arrangement of the garage inside with your own hands, a photo of which can be found on the Internet, you need to choose the right furniture. Modern models differ in functionality and practicality. Metal garage furniture does not take up much space. Most often, the room in question is equipped with wardrobes and dressers. When placed in a workshop garage, it is worth purchasing a worktop. Furniture is most conveniently placed in the farthest corner.

Equipment

Carrying out simple measures such as changing a wheel is possible with the use of simple tools and jack. To carry out more extensive work, the driver needs to acquire some professional equipment.

Garage workbench

Most often, this device is collected from wood. The working area is equipped with metal sheet, allowing to extend the operational life of the structure. The most practical are considered to be two- or three-level workbenches, since they serve to accommodate more items.

Welding machine

When going over ideas for a garage, it is important not to forget about purchasing a welding machine. For personal use, a simple carbon dioxide model that works with wire is perfect for the driver. Alternatively, an instrument with tungsten electrodes for shielding gas operation can be purchased.

Oil-water separator

The device is used to clean the air from vapors, oil and water droplets and other elements. The device is irreplaceable when painting a vehicle. With its help, you can achieve extremely uniform paint application on the surface of the car.

Compressor

The device is necessary for preparatory work and painting the car. The device simplifies many garage activities: cleaning tools, inflating wheels, etc. Most often, drivers prefer piston or diaphragm compressors.

Entrance to the garage

Most often, when arranging the entrance to the garage, a floor is created with a slope of 15-20?. The design of such a plan is convenient, safe and practical.

Garage interior

Thinking about how to equip a garage with your own hands, you should not forget about the interior of this room. Correct finish and harmoniously selected colors will help transform the appearance of the room.

Keeping order

The order in the garage is an important issue that worries the owners of personal vehicles. It is worth installing screens on the shelves on which you cannot avoid working disorder. This will help make the garage look cleaner.

On shelves and racks, it is worth making holes for sweeping away debris. Thus, ventilation can be achieved wooden installations and reduce the risk of corrosion on things located on these structures.

Garage flooring should be durable and easy to maintain. By equipping it with a slight slope, you can ensure that cleaning the room will be as easy and quick as possible. When watering the surface with a hose, you will have to wait until the dirty water drains itself onto the street.

Adhering to the advice of professionals, you can perfectly equip your garage without spending too much time and money.

Most car owners spend at least two hours daily caring for their car, and even more on weekends. If we talk about something major, for example, repairing an engine, then we can talk about several days. For this reason, it is imperative that the garage environment is as comfortable as possible to work with.

DIY garage arrangement

It is not as easy to equip a garage as it seems, because in addition to spare parts and tools, it usually stores everything that does not fit in the apartment. Moreover, any repair is pollution, which sooner or later turns the garage into a very unattractive place. In a word, even during construction, you need to think about how the garage will look in the future, how best to combine a workshop and a miniature warehouse in it.

DIY garage arrangement

DIY garage arrangement

First, you need to decide on the main tasks. First of all, the garage should always be clean, so you need to use non-staining and easy-to-clean materials for finishing. It is also required to draw up a diagram of the location of tools and equipment in advance, that is, to determine where the racks, shelves, workbench, etc. will be located.

How to equip a garage

Stage 1. Interior finishing

Sparks are often generated during operation.

In this regard, finishing materials are subject to whole line requirements. Materials should be:

• non-flammable;
• resistant to mechanical damage;
• able to withstand the effects of aggressive chemical environments;
• resistant to pollution.

Moreover, they should be easy to clean and not absorb odors. Obviously, not all materials have such qualities. Those that do possess them include plaster, lining and ceramic tiles... Each option has its own strengths and weaknesses, let's get acquainted with them.

1. Plaster

Ideal if you want to hide the unevenness of the walls. The plaster will effectively hide all existing defects and improve the interior of the garage.

Note! The plaster must be covered with a layer of facade paint, otherwise the surface will begin to crack and crumble.

2. Lining

The lining is used mainly in the northern regions of the country, since it is very convenient to place thermal insulation material between it and the profiles. In this case, it is better to use a front profile, made of polyvinyl chloride - it is fireproof and waterproof.

The only drawback of the lining is its low strength - after strong blow the panels are deformed and need to be replaced.

3. Ceramic tiles

More time consuming and costly option. Requires a preliminary calculation of the strength of the walls, because the tile weighs a lot.

At the same time, ceramics does not burn, is easy to clean and has increased durability. If the garage will be sold in ten years, then it is better to finish it with ceramics. Expensive, of course, but for a long time.

Stage 2. Inspection pit

To repair the machine, it is advisable to equip an inspection pit. Even the smallest breakdown becomes a serious test if it is impossible to reach it without a viewing hole. In such cases, you have to go to the service station and pay a considerable amount for repairs.

In a word, the arrangement of the inspection pit will soon pay off. Below is the sequence of actions.

Step 1. First, the dimensions of the future pit are determined and the marking is carried out. In this case, a balance must be observed - firstly, the pit should be spacious enough, and secondly, its width should be such that no problems arise when entering the garage.

The required width is 0.7 m, it will make you feel comfortable when carrying out repairs and at the same time will leave enough space for parking maneuvers.

With regard to the depth, it depends on its own height, but again it is better to make it a little deeper than required - it is much easier to equip additional flooring than to redo the floor when deepening.

Step 2. At the end of the marking, you can start excavation work. The most difficult thing is to dig a hole, since more than 9 cubic meters of soil will have to be removed.

At the end of the marking, you can start earthworks

Step 3. The floor is leveled and covered with a 25 cm cushion of rubble. It is noted where the niches for tools will be located.

Step 4. Walls can be filled with concrete or bricked. Concrete is more reliable, so it will be considered.

Brick wall masonry

First, the floor is poured, a thickness of 7-8 cm will be quite enough. For reliability, you can pre-lay the reinforcement. Next, a wooden formwork is being built, which will be gradually filled with a solution in tiers of 40 cm. The upper edge is strengthened metal structure, fixtures are installed.

Pit tiling and lighting fixtures

Note! It is advisable to cover the concrete floor with a wooden ladder, because it will be much more pleasant to work on such a surface.

Stage 3. Shelving

For the convenience of work, each tool should have its own place. Shelves and racks can be bought ready-made, but they are quite expensive, and they do not always meet the needs of the car owner. Therefore, it is better to make the rack yourself. It seems daunting, but only at first.

Step 1. First, the dimensions are marked. Most "shop" racks are equipped with shelves 1 m wide. This is not enough for spare parts, so the width needs to be made wider.

You also need to leave at least 20 cm clearance from the floor so that there are no difficulties with cleaning the floor. It is advisable to perforate all the shelves - this will give two advantages at once:

• it will be easier to get rid of dirt and dust;
• the holes provide good ventilation, which will prevent corrosion or moisture damage to the instruments.

Prefabricated shelving unit - drawing

Step 2. For the manufacture of the rack is used metal carcass from a profiled pipe or angle 30x30. Parts are welded or bolted together, then shelves are cut out. Usually boards are taken for this, but moisture-resistant plywood would be the best option - it costs more, but it will last a long time.

Stage 4. Shelves

Like shelving, it's best to make your own shelves.

Step 1. First, the number of shelves, their dimensions and installation locations are determined.

Step 2. In accordance with the calculations carried out, everything you need is procured:

• boards;
• saw-hacksaw;
• bolts;
• level;
• iron suspensions;
• a hammer;
• dowels;
• screwdriver;
• electric drill.

Step 3. Using the mounting level, the attachment points are determined. Next, holes are made, dowels are hammered into them.

Note! For reliable fastening, it is advisable to use dowels with hooks.

Step 4. With a certain step (in accordance with the holes made earlier), hangers with lugs are fixed on the shelf. They can be nailed down with regular nails. The assembled shelves are hung on dowels.

It is worth remembering that hanging shelves should not be too long, otherwise they will break under the weight.

Stage 5. Garage workbench

The most convenient for a garage will be a workbench that combines shelving and a work surface. So the tools will always be at hand, which will significantly reduce the time spent looking for one or another of them.

For the manufacture of a workbench, a metal frame is assembled, on which it is installed wooden table top with shelves. The table top is covered with sheet steel so as not to damage the structure during work.

The workbench needs to be equipped with several sockets for electrical tools, as well as a fluorescent lamp, equipped with iron brackets for this.

Video - Garage workbench

Stage 6. Garage cellar

Often, garages are equipped with cellars in which conservation is stored. This moment, as well as the viewing hole, must be thought out in advance.

Step 1. First, the old flooring is removed, after which all pieces are removed, and the garage is cleaned to dig a pit.

Step 2. Next, earthworks are carried out. In this case, special attention should be paid to the type of soil, because if the soil is sandy, then with careless digging, the walls of the room can collapse. That is why it is advisable to use a variety of wood and metal props.

If the soil is clay, then there is nothing to be afraid of, since it is able to withstand any load.

Step 3. The bottom is covered with rubble and carefully rammed. Next, reinforcement is installed, the floor is poured with concrete.

Step 4. The walls are made of bricks.

Step 5. The cellar is covered with a reinforced concrete slab, after which waterproofing - bitumen or roofing felt - is laid. Any heat-insulating material can be used for insulation.

Note! The cellar can be equipped even if the groundwater level is high enough. For this, a metal tank is welded throughout the pit. When the water level rises, the tank will rise, and in summer it will simply lie on the bottom.

Step 6. It remains only to take care of the ventilation of the cellar. For this, above the ground level, steel pipes(2 pcs.), Preferably on opposite walls of the structure. The supply pipe is located at the bottom, and the exhaust pipe, respectively, under the ceiling. Both pipes must be of the same diameter.

A few words about ventilation in the garage

It would seem that such ventilation is not needed, but without it, a lot of dust will accumulate in the garage, which negatively affects not only the body, but also the internal parts of the car. And the exhaust gases are harmful to the body.

The simplest and most affordable option is natural ventilation. Two holes are equipped for it (the same as for the cellar). For maximum efficiency, the supply and exhaust pipes must be installed diagonally, opposite each other.

Video - Examples of arranging a garage

Outcomes

You can equip a garage on your own, although this will take a lot of time and effort. But the result will more than pay off all the costs, because in the end you will get not only an autobox, but also a miniature workshop. The garage will become a place for relaxation or daring experiments with the car.

Read an article on our website - a do-it-yourself press for a garage.

Today we will discuss a very broad topic: how to equip a garage inside with your own hands? Many motorists are thinking about this issue, since such a room is used not only for storing a car, but also serves as a workshop for many men. I would like to create an effective and comfortable workplace without spending a lot of money and effort.

And it is not strange that the question of arranging a garage is raised so often, because for a real motorist, a garage is a second home, many spend their free time there. And only reasonable equipment of your garage will make it possible to use it 100%, moreover, the garage is usually small in size.

It is the correct arrangement of shelves and racks that will allow you to work freely without constraining yourself. To do this, you must carefully examine the garage room and identify the so-called extra areas (those near which you do not walk much). If you install shelves in such places, you will rationally use the free space. How to equip a garage yourself without much waste? You will learn this from this article.

How to plan all garage areas when building

It is easiest for those who are thinking about arranging a garage even before it is built. Then you can take into account the size of the vehicle and the tables available, as well as other things.

When designing, you can take into account the location of various zones and control their size so that everything works out perfectly, and the car fits with all the planned objects. If you have not built a garage yet, but are just thinking about it, you can think about a two-story building. After all, then the workshop can be made upstairs, and the car will stand in free space without any problems.

But what about those who do not build a garage themselves, but bought a ready-made one? In this case, it will be a little more difficult to equip a garage. But do not despair, with perseverance and a responsible approach, you can cope with any problem.

Before starting to free the garage from things, carefully think over the location of the car and individual parts, it is best to sketch the plan on a piece of paper. In order to visually evaluate the garage, get rid of all that is superfluous, then you will not miss anything and it will be easier to navigate in space. Then it is necessary to take into account the reserve of space so that your car can enter and leave without problems and wasting time on unnecessary maneuvering. Also take a closer look at the type of gate, you may need to change them, or even change. If your plans include insulation of the garage walls, then a few centimeters need to be given for the insulation material.

Be sure to think over the protection against thieves and the heating method, this is very important, because excess moisture can appear in the garage, which, in turn, will lead to fungus.

Basic requirement: order in the garage

Our garages contain not only a car, but also spare parts with tools, as well as winter or summer pairs of tires. If all these necessary things are lying around anywhere, then you will definitely not get a productive and free garage.

Internal order not only attracts people, it is useful for those who work in the garage. Customers will be delighted.

Now, we will list the advantages that come with tidied garages:

• having foreseen everything and considering a certain place for every detail, you can save space for other things or just freely move around the sections of the garage;
• when repairing a car, it will be easier to concentrate in the process;
• you will save time, because if the garage is a mess, it is very difficult to find the right part or tool.

What you need to consider when arranging a garage workshop

How to properly equip a garage in order to create not just a storage place, but a workshop?

1. The first thing to think about is buying boxes for storing bolts and other small parts that are easy to lose in the garage. But don't buy one or two boxes, in fact there are many tools that require a separate space, not a wall mount.
2. Next, make or purchase stands with built-in holders. But there is a cheaper option: to avoid unnecessary costs, order a wooden stand, and you can nail homemade holders onto it.
3. Don't forget about the shelves, they are very easy to keep in order. Also remember about budget options, because you can restore old table with built-in shelves, for this, remove the old coating and apply varnish.
4. In many garage spaces, a workbench is provided; it needs enough space for it. It is very important to install shelves next to it, then during work it will be possible not to go through the entire garage for the necessary tools.

Many garages do not have room for enough shelves, which can cause problems. But how do you make a workshop in a small garage? To prevent the shelves from taking up your required space, you can do with hooks. You need to equip the hooks on the walls.

What you need to know when arranging an inspection pit

First, think about whether you need a viewing hole at all. If you have an expensive car, then you probably go to a service. And not everyone can be well versed in cars. Here the question is about the necessity, not the beautiful look in the workshop.

But still, if you decide that you need a viewing hole, we will help you with the construction.

Where to begin? We all know that any structure does not begin to be built until its dimensions are marked. Such actions are very necessary, because we will build a pit in the finished garage. This, in turn, is difficult to do; it will be necessary to build in a limited space.

Take this seriously, because if you don't guess with the size, there can be two extremes:

1. If the pit is too large, then parking will be difficult. You will worry every time that the car might fall into a hole.
2. If you make a viewing hole too small, it will be inconvenient to carry out repair work.

Determine the size based on the structure of the room and the dimensions of your car. But it is possible to make a pit, based on standard or generally accepted sizes.

The width of the standard pit is 70 cm. This is enough for the sedan class, especially for the Zhiguli. If you have a truck, you need to put on 10-15 centimeters. Leave about 20 centimeters for maneuvering.

Make the length of the garage pit based on your personal requirements for the car, nevertheless, it does not seem logical to make it less than two meters.

Now you can see a photo that will help you navigate.

It is impossible to say the exact depth of standard holes, because it depends on your height. If the head rests against the bottom, it will be inconvenient, if not impossible, to carry out repair work. Therefore, find out the height of your car's ground clearance (ground clearance is the height from the ground to the threshold) and calculate that standing in the hole, from head to bottom, was 20-25 cm.

Now that you have calculated the size of the inspection hole, you can start excavating. You can do this yourself. With regard to concrete work, the situation is more complicated. This video will help you simplify the task.

How to make a cozy garage

Since a man spends a lot of time in the garage, comfort is necessary. Then the work will go faster and with joy, because physical labor is the basis for joy. When you see the result, you want to continue.

To do this, do not forget about the little things that many do not notice, but it is they who make the comfort. It can be a picture or a figurine made from scrap materials, or even better from spare parts. The photo below confirms that a cozy garage is better than usual.

But what should be mandatory? Now some little things and details will be listed:

Heating

For many, heating is very important. In winter, when most garages are humid, it will be difficult to work. So think about heating.

Those who are not particularly bothered by the cold prefer insulation of the walls and ceiling in the garage. Then the temperature will not drop below zero. But there are people who are not used to working at low temperatures. What should they do? There are several solutions:

Many are inclined towards another option, since electricity is expensive and firewood can be bought cheap.

It is not easy to equip a garage with your own hands, but if you approach such work responsibly, the result will justify these small money and power expenditures. Various videos on the Internet will help you in your work, do not be lazy to look for answers to questions. A well-equipped garage will contribute to the speed of work.

How to equip a garage inside with your own hands

If the owner loves his car, then his garage is in complete order - no clutter, everything is in place, everything is on the shelves. And do-it-yourself homemade products for the garage for such motorists become something like a gift to their car. Most modern car owners have ceased to perceive the garage as a storage space for a car. They associate it with a home for a car. And the house should be comfortable and clean.

Zones in the project

It is much easier to plan all areas of the garage for those who are building new house for a car and who has a place and opportunity to build a solid garage. Even during the design process, you can allocate zones and make sure that no deviations from the planned occur during construction. The most ideal garage is two floors, where the workshop is on one level, the basement and the viewing pit are on the other.

And what if you bought or inherited a close one-story garage? Do not refuse such a gift of fate! We'll have to strain a little and arrange the garage inside with our own hands. It is not as difficult as it seems before starting work. And almost all owners of uncomfortable garages undertake to reformat the motorhome with such enthusiasm that the process goes quickly, smoothly and after a short period of time you get a shining garage, where every thing "knows" its place.

But before the general cleaning of the old garage, sketch out a plan of arrangement. To make it easier to visually navigate in space, throw out all the rubbish that interferes with determining the spaciousness of the room, calculate the necessary margin for maneuvering your car, see how you are satisfied with the type of gate available (it may need to be replaced), determine if or not wall insulation (if not, then subtract a few centimeters from the total area if you intend to insulate the walls from the inside).

In the sketch, do not forget to outline the place for cabinets, shelves, shelves.

Provide burglary protection and a heating method when setting up a heated garage.

Materials for arranging a garage

The plan is ready. It is necessary to start arranging the garage with your own hands with the choice of material for finishing.

The list of requirements for them is as follows:

• unpretentious in care;
• non-combustible;
• resistant to chemical and mechanical stress and pollution;
• resistant to wear and tear;
• environmentally friendly.

If you are faced with the problem of choosing between the beauty and functionality of the finish, we recommend choosing the latter. The garage is not a living room, it would be more logical if the interior decoration of the room does not shock random guests with its “unearthly beauty”, but makes it easier to take care of the room.

Reliable top and bottom

Both the ceiling and the floor in the garage serve additional functions. The floor must be able to support the weight of all workbenches and the vehicle. And the ceiling is quite suitable for arranging niches for storing seasonal items: skis, bicycles, skates.

But if you make shelves in the garage with your own hands (those under the ceiling), build them as strong as possible so that their contents do not fall out onto your head or onto the roof of the car.

Provide a heat-insulating layer on the ceiling, but do not overdo it, putting it too thick - you can "trigger" the formation of condensation.

Garage floors must be temperature-tolerant, mold-resistant, and resistant to spilled oil and other corrosive substances. The guarantee of the strength of the garage floor - concrete slabs as a base. With a coating, motorists also do not bother too much and use cement for it.

If, nevertheless, aesthetic feelings win and you want a little comfort in the garage, you can use special parquet flooring, ceramic tiles as a covering, or make self-leveling floors.

If you are equipping a garage floor with your own hands and you care how it looks and how long it will last, take care of installing a drainage system. The design is simple - an ordinary gutter at the entrance to the garage - but the benefits from it are enormous. Drainage prevents snow and rain puddles on the garage floor. If the garage is with a basement, it will also be necessary to install external drainage.

Are a viewing pit and basement required?

The owners of newly built garages do not consider the observation ditch and the basement to be superfluous. If a person is well versed in mechanics (or has the opportunity to invite a mechanic to his home), then he does not need to leave the car at the service station in the event of a breakdown.

But not in all cases it is possible to arrange these useful premises, but only when the location groundwater located below the basement floor mark.

The cellar in the garage must be ventilated, the walls must be whitewashed and treated with an anti-fungal solution, the stairs must be installed at a slight slope.

As for the inspection ditch, its height should correspond to the growth of the owner plus 10 cm of stock. The edges of the pit must be strong and not sprinkled under the slightest pressure. The ditch, in addition to being spacious (in moderation) and comfortable (insulated), can be equipped with shallow niches for tools and maximum convenience for the mechanic.

For not very experienced garage owners, an excellent demonstration of how you can equip a garage with your own hands, photos have been left for many years. Detailed step-by-step shots are especially helpful for beginners.

With or without pictures, do not forget to equip the inspection pit with several lights, without which it makes no sense to start car repairs.

About lighting - in more detail

The location of the lamps, their power, the presence of a switchboard must be thought out in advance.

Without fail, the luminaires must be:

• in the inspection pit;
• over the workbench;
• over the hood of the car;
• in the cellar;
• in the case of building a two-story garage, high-quality lighting is present on both floors.

Provide mobile lighting with a table (or some other) light on a carry - make enough outlets in different angles garage.

Do not hesitate in how to equip a garage inside with your own hands: many outlets have never interfered with anyone.

Workshop tidiness

The workshop should accommodate everything from the car to spare parts and the little things needed for maintenance. And at the same time, all goodness should not wallow in a "creative mess" or be shoved at random - tools laid out in their places will save you a lot of time during repairs in that sense. that you don't have to waste precious minutes looking for the key you need.

In the workshop area, provide space for:

• inserts-organizers - boxes for storing the smallest parts (bolts, nuts, wire) and small tools, in organizers the parts will always be in place, in order and at hand;
• stands with holders, hooks and magnetic compartments for storing large metal tools and boxes;
• shelves - the most budgetary way to quickly organize the order in the room, shelves and racks in the garage with your own hands can be built from any suitable material at hand;
• workbench - it must be organized with maximum convenience and represent the work surface, combined with the shelves, or at least be adjacent to them, so that the car owner can take the necessary tools from the place.

If the room is too cramped to accommodate enough shelves, try to fit the walls as much as possible. big amount mounting hooks to be used as tool holders and work clothes hangers.

Ventilation

Everyone who equips a garage inside with their own hands sooner or later has doubts about the effectiveness of a homemade ventilation system- it is too simple.

Homemade "ottoman" for the hallway: we save 3000 rubles

There are no similar homemade products

The garage is a second home for car enthusiasts. This building serves not only to shelter the car in bad weather, but also as a place to store all kinds of tools, often is the owner's "mini-workshop", where you can make almost any repairs. Each owner equips his garage for himself. Some people are not very serious about the equipment of the room, and it begins to bring more problems than good. But still, most motorists try to adhere to certain requirements that are important to fulfill for more convenient maintenance of their car. So, arranging a garage with your own hands requires compliance with certain requirements.

Primary requirements

Arranging a room for a garage means that it will be warm and dry enough.

Your car should not freeze even in very severe frosts. If possible, you can provide a system for quickly warming up the garage.

It is very important to reliably protect the premises from outside intrusion. When setting up your garage, remember that access to tools or equipment that will be located in the garage should be as convenient and simple as possible. Therefore, it is better to think in advance about the location of the storage places.

In general, this is only the very minimum of requirements that it is desirable to take into account for your own comfort. You can also complement and equip the garage with additional tools for repair and maintenance of your car at will. A workbench with tools and a viewing hole can be a great addition to the equipment of the room.

How to install racks and shelves

For the most comfortable arrangement of the garage, a lot of space is required, and this is often a problem. The storage of working tools and equipment also takes up quite a lot of space. Therefore, when setting up a garage on your own, try to adapt as much space as possible for shelves or cabinets, but so that they do not interfere with free movement around the room. The shelves can be hung wherever you will not cling to or bump into them, over tables, windows, shelves, and so on.

The distance to the machine when hanging shelves on each side must be at least 1 meter.

Quite often, it is convenient to equip a wall for a variety of shelves and equipment, which is located farthest from the gate. It is there that the main working tools, a compressor, a workbench, and more are located. Everything is at hand and does not interfere with moving around the room.

A large number of shelves in the garage is a big plus, but it is also worth thinking about a small locker where you can hang work clothes and put some rags.

How to properly equip an inspection pit

The question of the presence or absence of a viewing pit is quite individual. First, you need to decide how high the need for arranging such a pit is. There is no point in equipping it if you often use the overpass on the street.

If you decide that you need such a pit, then you must take into account that the walls and the bottom must be concreted. The pit edges should be reinforced with iron corners. It is also worth considering what and how you will close the inspection hole during its non-use.

In the corner of the pit, a drainage hole is needed, all the water that accidentally falls down will be collected in it. The hole must be made of such a size that it is convenient to scoop out the accumulated water from it. In order not to accidentally step into the hole during auto repair, it must be covered with a lattice.

Small equipment can be placed in the pit, which can be useful for repairs; niches can be prudently made in the walls so that it is convenient to put the used tool. Also take care of lighting the inspection pit, install a lamp, or equip a place for a portable lamp.

Necessary equipment

A standard set of tools and a jack are enough for a normal wheel change or disk replacement, for carrying out the most common work under the hood of a car. But in order to perform more complex work, it is necessary special equipment.

Crafting table

It is best to use wood and metal to make a workbench. It is best to cover the working area with a piece of metal, protecting the wood from rapid wear. It is better to make a workbench in two or three levels in order to arrange as many necessary things as possible.

For normal body repairs, a welding machine with either tungsten electrodes, which are in a shielding gas, or a carbon dioxide machine, which welds metal with wire, will be enough for you.

Such an apparatus is used to purify the air from vapors, oil droplets, water and other small particles that may be present in it. This is a very convenient device used when painting a car, and contributes to the uniform distribution of paint over the metal.

Washing

Of course, this is not a professional car wash. And just about the one that everyone can equip in their garage. To do this, you just need to bring a hose or pipe to supply water to the garage and drain it into the sewer. However, remember that electrical wiring and lighting will need more protection.

High-quality ventilation and lighting

It is very important to create high-quality ventilation in the garage, it will not only save the room from unpleasant and harmful odors, but also protect it from the formation of dampness and excessive dust.

Ventilation holes are usually made on both sides of the gate at a low height and covered with grilles. The same holes are made on the opposite wall, but already under the ceiling.

Of course, the best lighting is natural, so if possible, you should think about having a window. If this is not possible, then make several lighting zones: above the working area, general and portable, with which you can highlight the most necessary.

Video

An example of arranging a garage inside, you can see below:

Photo

Also, to equip the garage, you will need to buy metal tool cabinets, racks, workbenches and other garage equipment that will fit into the interior of the garage.

A garage is required for storing vehicles. But if it is properly equipped, it can also become a repository for tools and equipment, a pantry, a workshop. In this article, we will talk about how to arrange a garage so that it becomes a comfortable multifunctional room with a stylish masculine design.

Source decoratorist.com

Process interior arrangement garage space should begin with the development of a garage layout. This is necessary in order to properly distribute the available space. The first step, of course, is to mark the place for the car. Then the location of the racks for storing all the necessary automotive equipment is determined. All the remaining space can be filled at your discretion.

At the same stage, it is worth deciding on the color of the finish. It is better to make the walls light, so that the garage does not seem too cramped. In addition, light shades of the interior will smooth out the imperfections of the technical room. Against the backdrop of light surfaces, shelves with tools and spare parts will look less messy.

Source nikkoshine.com

Finishing materials

After drawing up a simple project, you need to decide on finishing materials for walls, floors and ceilings. In this case, first of all, the specifications different options finishes. But aesthetics are also taken into account, since the design of the garage is not the last thing in its arrangement.

The main requirements for materials for interior decoration garage:

• incombustibility;
• non-toxicity;
• resistance to mechanical stress;
• resistance to chemicals;
• resistance to pollution;
• unpretentious care.

Plaster

The most economical option for wall decoration is plastering. A well-applied plaster will last for many years. The main advantage of this option is absolute fire safety. Of the minuses, it is possible to note the duration of the plastering process and the need to involve qualified specialists in the process.

Source eastcoastrapist.com

Dye

Walls for painting need to be primed and putty. The result should be a flat surface with good adhesion. Often, water-based facade paints are used for interior decoration of the garage. They resist moisture and are highly abrasion resistant.

Acrylic paints are often used, which are suitable for working with any substrate. This paint can be used to cover a plastered wall, a wall made of bricks or, for example, concrete. This is the most economical paint option for garage walls.

Experts recommend painting brick walls with deep penetration facade paints. They fill the pores evenly ceramic wall and concrete seams. The result is a reliable protective and decorative coating.

If the wall is concrete, it is better to decorate it acrylic paint based on organic resins. In this case, the room will not lose the ability to self-ventilate, and the garage will always have an optimal level of humidity.

Source eurodomik.ru

Tile

Ceramic tiles are used for wall cladding in any room with high humidity and temperature changes. It is a reliable and durable material that is easy to clean and does not require complex maintenance. However, tile decoration is rarely used in garages due to the rather high cost.

Source stroyfora.ru

Lining

The garage can be finished with wooden or plastic clapboard. Wooden one is characterized by increased flammability, but, despite this, many motorists choose just such a cladding option for their garages. Aesthetic appeal plays a huge role here. wood panels that make the technical room more comfortable for a long stay.

In addition to aesthetics, wooden lining is easy to use. You can easily hang a shelf or a hanger on it. Therefore, the number of garages designed in this way does not decrease. It's good that there is currently a risk of fire wooden lining in the garage, you can (and should) reduce it with the help of special impregnations.

Source les66.ru

Plastic panels, despite the fact that they are mounted in the same way as wooden ones, represent a fundamentally different finish. Plastic is a much less flammable material. But it has another significant drawback - it is very fragile. In a garage with such a finish, you cannot rely on wall-mounted equipment; all racks should only be floor-standing. In addition, it is very easy to damage the plastic lining mechanically.

Source stroypomochnik.ru

Siding

Siding is mounted on the crate, just like the lining. For interior decoration of the garage, plastic or metal siding is used. Metallic is better in several respects - it is fireproof, immune to aggressive cleaning compounds, resistant to temperature extremes and strong enough.

Source 24segodnya.ru

The functions of finishing the garage inside are the design and protection of the walls. When choosing a material option for interior design, you need to remember that it must be durable, reliable and aesthetic.

Source amukraine.org

Ceiling decoration

The ceiling is often finished with the same material as the walls. It can be painted, covered with plaster, sheathed with siding or clapboard. And you can apply a different type of material and make a ceiling of plasterboard or profiled sheet.

Source drive2.ru

On our site you can get acquainted with the most - from the construction companies presented at the exhibition of houses "Low-rise Country".

Flooring

The garage floor carries a tremendous amount of stress. In addition to the car itself, it must withstand heavy equipment. At the same time, in the process of repair work, the floor is exposed to serious mechanical stress. Therefore, very high requirements are imposed on the floor covering.

Concrete

The most widely used option is concrete casting. For concrete screed high-strength concrete is used. Often, the screed becomes the basis for laying one or another decorative material. But in a technical garage, just a concrete floor looks quite logical.

Source virm.net

Wood

Wooden floors can be installed in your garage as a temporary, cost-effective floor covering. The tree does not have high abrasion resistance, therefore it quickly loses its original characteristics. Wooden boards not only deform under the weight of a car and heavy equipment, but also absorb all kinds of automotive fluids that are often spilled in the garage. But in a small garage that is not intended for repair work, a wooden floor can last for a long time - about 5 years.

Source derevyannyy.com

Self-leveling floor

A cement-based self-leveling floor has characteristics similar to those of a concrete screed. But bulk mixes are more moisture resistant than concrete, and besides, they do not absorb dirt. They are generally very attractive in terms of their technical performance. As a disadvantage, the high cost of such a coating option can be called. The self-leveling floor looks like wet concrete, and car owners who are annoyed by the glossy gloss of the floor cover it with additional decorative material.

Source stroikom.su

Porcelain stoneware

The garage floor can be laid with special technical ceramics with increased strength and anti-slip surface. This option is quite practical. At the same time, it provides an attractive design for the room, as it exists in various colors. But the ceramic coating can crack and split, and the seams between the tiles absorb fuels and lubricants.

Choice floor covering is carried out taking into account many factors, such as the size of the budget allocated for the arrangement of the garage, the amount of work to be performed in the garage, the aesthetic preferences of the car owner, etc. Experts recommend the use of filling materials, since they correspond more than others to the operational characteristics of the garage.

Source perspektiva24.com

On our website you can find contacts of construction companies that offer the service of project development and installation of garages and other small forms on a turnkey basis. You can communicate directly with representatives by visiting the Low-Rise Country exhibition of houses.

Gates

Gates have a special function in the garage. It is necessary to choose the best option for the gate, which will fully meet the technical and aesthetic requirements of the owner.

Swinging

The simplest view garage doors... Swing leaves are made of durable metal and reinforced with a reliable frame. In one of the doors, a doorway is usually made so that you can enter or exit the garage without opening the gate completely.

Source tvoygarazh.ru

Recoil

The recoil mechanism is very convenient. With it, the door leaf moves to the side along the fence or wall of the building adjacent to the garage. This option is usually used when arranging garage buildings located at the entrance to the site.

Source ms.decorexpro.com

Lifting

They are single-leaf structures that rise up to the ceiling of the garage. A good option for small garage spaces. But the lifting line of such gates must be taken into account when thinking over the arrangement of the garage inside so that they do not touch the lamps or ceiling decoration.

Source freepatriot.club

Sectional

They work according to the lifting principle, but when opened, they are divided into sections and fold under the ceiling. They move along the guides using a spring mechanism.

Source ar.aviarydecor.com

Roller shutters

Convenient and inexpensive version of the gate, which in the open position folds into a box above the opening. Roller shutters are installed in those garages that are located in a protected area, since this type of gate is easy to burglary.

Source bitovki.info

Ventilation

The garage needs to have a good ventilated system. Otherwise, unpleasant car odors will accumulate in it. The easiest and most rational way to arrange ventilation is to make two ventilation holes on both sides of the entrance gate at a low height, and two more on the opposite wall high under the ceiling.

Lighting

Artificial lighting should provide enough light for renovation work. The working area of ​​the room should be especially well lit. Modern design ideas for a garage, multi-level lighting is assumed, including an overhead light, a side light, and a set of portable lighting fixtures.

Source dekoriko.ru

Storage system

In the garage, you need to store many items with which you can take care of your car. All this inventory should be arranged in such a way that order is maintained in the room, and that nothing threatens the safety of the car and people in the garage.

The best option for organizing storage of garage accessories is the installation of special ready-made shelving. Today you can buy racks of various sizes and configurations. The main thing is to think in advance what kind of storage system should be in terms of size and number of shelves.

Source pinterest.com

Instead of shelving, you can make a storage system from a set of shelves mounted on the wall. This option is only suitable for garages with reliable strong walls with appropriate finishing. When installing shelves or racks, remember that there must be a distance of at least 1 meter from them to the car.

Video description

Shelves and racks in the interior of the garage

The storage system can be supplemented with perforated panels. These garage equipment are wall panels with hooks and attachments for tools, work clothes, hoses, ropes and more. When attached to a secure bracket, it is a great storage solution for tires, wheels and bicycles.

Video description

Perforated panel for garage

Observation pit

The inspection pit does not have to be in the garage. If the car owner prefers to independently inspect and repair his car, he can use the flyover installed on the street for this. If it is decided to make a viewing hole, several important conditions must be taken into account:

• the floor and walls of the pit must be concreted;
• its edges need to be reinforced with metal corners;
• for a convenient location of tools, it is advisable to equip niche-shelves in the walls of the pit;
• the walls of the pit should be insulated with expanded polystyrene plates;
• the pit must be closed with a lid, the upper edge of which should be flush with the floor;
• to collect water that has fallen into the pit, a drainage hole should be made in its corner, and covered with a grate;
• it is necessary to install lamps in the pit.

Video description

Options for inspection pits in garages

Conclusion

Like any technical room, the garage must be equipped in accordance with all norms and requirements. At the same time, it may well be interesting and attractive in design.